From the Sector

A sector alliance that was formed to tackle issues relating to microplastics has completed the next phase of its project to develop a harmonised industry standard for the supply chain. The Cross Industry Agreement (CIA) has revealed the results of a fibre fragmentation trial that has been carried out in advance of establishing a CEN Standard (from the European Committee for Standardization). Once confirmed, the standard will also become an ISO standard under the Vienna Agreement, providing apparel manufacturers and policy makers with a vital tool as part of wider work to reduce microfibre shedding into the environment.

In 2018, five industry organisations agreed to join forces to proactively tackle the issue of microplastics, and signed the Cross Industry Agreement. The initial signatories were European industry associations that represent the European and global value chains of garments and their associated maintenance – the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.), European Man-Made Fibres Association (CIRFS), European Outdoor Group (EOG), EURATEX the European apparel and textile industry confederation, and the Federation of the European Sporting goods Industry (FESI). Together, the five organisations understood that the very first step to enable global action around the topic, was to agree a harmonised test method which would allow the collection and comparison of globally generated data, to aid the identification of solutions.

The microfibre shedding test method was developed thanks to the joint efforts and cooperation of experts from 28 European, American and Asian organisations; the result was handed over to CEN in 2020. Since then, representatives from the CIA have been working with CEN to fine tune details in order to meet the requirements for a CEN Standard. To verify the reproducibility of the method, the partners have carried out a round robin trial (RRT) to determine if the method could be replicated in different laboratories and produce similar results. 10 organisations participated in the RRT, which was co-ordinated by the CIA, sending fabric samples to all of the laboratories involved and then collecting and analysing the data.

The results from the RRT show statistically significant consistency, both within and between participating laboratories, which demonstrates that the method is both repeatable in the same setting and reproducible in other laboratories.

The CIA has submitted the results of the RRT to CEN, with the intention that the CEN Standard is confirmed in the near future. Once that has happened, it will be promoted throughout the apparel industry and will become a key tool for researchers, businesses and governments as they accelerate efforts to reduce microfibre shedding associated with garment production.

TCV, Teijin’s carbon fiber business base in Vietnam, was established in May 2019. Teijin Limited announced that Teijin Carbon Vietnam Co., Ltd. (TCV) in Ha Nam, Vietnam, has started operating commercially to manufacture carbon fiber products including prepreg, a fiber sheet pre-impregnated with matrix resin as an intermediate material for composites. TCV initially will produce carbon fiber materials for sports and outdoor activities, including fishing, golf, bicycle and ice hockey goods, for markets in Southeast and South Asia and Asia-Pacific. Sales will be handled by TCV as well as carbon　fiber sales affiliates of Teijin operating in these markets.

Teijin’s sales affiliates in Singapore, Shanghai and Taipei work to identify demand opportunities as well as provide customer services in Asia. Internal collaborations between these companies and TCV shall strengthen Teijin’s presence in the upstream and downstream sectors of Asia’s fast-growing markets.

Increasingly strict environmental measures and the upgrading of environmental frameworks, such as sustainable development goals (SDGs) and the Paris Agreement, are expected to stimulate greater use of lightweight and highly rigid carbon fiber. Demands are growing in Asia, especially in the fields of sports and outdoor activities, industry and aerospace. COVID-19, for example, has led to new trends in sports and　outdoor activities, such as renewed interest in fishing due its compatibility with social-distancing protocols.

• A coalition of 13 European business associations, representing different European sectors calls for the swift ratification of the EU-Mercosur association agreement.
• With the political agreement reached already 2 years ago (June 2019), now is the time to move forward and unlock the manifold mutual benefits that this agreement will deliver.

The EU-MERCOSUR agreement is the largest and most ambitious trade agreement ever negotiated by both sides, provides regulatory certainty for both trade in goods and services, and establishes better trade links between countries of respectively 440 and 260 million citizens. It also includes the most advanced sustainable development provisions that will foster partnership, help mitigate climate change and bind both sides to effectively implement the Paris Agreement. Moreover, it includes enforceable commitments on workers' rights and environmental protection through a dedicated dispute settlement mechanism.

Failure to ratify the agreement would leave the EU and Mercosur with fewer instruments to build mutual trust and cooperate to face the biggest challenge of our time. Moreover, non-ratification will lead to Mercosur countries continuing to trade, or even expanding their trade, with other trading partners that have substantially lower environmental and labour standards. Please find attached the full joint statement.

• Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

“The coronavirus pandemic situation has taken the central stage, so in light of the current situation, it would not be possible for us to satisfy our customers’ requirements for such an international trade fair as JEC World in June. We truly regret having to make this difficult decision once again. However, we are all committed, starting today, to deliver the best JEC World experience to our clients in 2022.” says Eric Pierrejean, CEO of JEC Group. “While waiting for welcoming the international composites community back to Paris in March 2022, JEC Group team is preparing various online Rendez-Vous in June enabling the entire composites community to discover trends and innovations, and to connect″, he added.

The leading composites event will take place from March 8 to 10, 2022, at Paris Nord Villepinte (same venue) and online for a new augmented experience.

As the leading trade show of the composites industry, JEC World will bring together the whole composites materials value chain and professionals from application sectors, experts from the scientific and academic world, associations, and media from more than 112 countries, introducing in 2022 its audience its new digital platform, JEC World Augmented.

“JEC World 2022 and the augmented platform  will bring the international composites community and specialists together to resume business, network, hold business meetings. They will also have the chance to participate in conferences, workshops, and discover the latest composites innovations,” says Adeline Larroque, Show director and EMEA events.

Lectra announces its plan to acquire the entire capital and voting rights of US-based Gerber Technology. A key Industry 4.0 player in the fashion, automotive and furniture industries, Lectra designs smart industrial solutions – software, equipment, data and services – that help brands, manufacturers and retailers develop, produce and market their products.

The acquisition, if and when consummated, would allow Lectra to complement its market position and continue to enhance its offerings based on Industry 4.0 technology that will enable its customers to boost the productivity and profitability of their operations. After the French work council of Lectra is consulted and the binding documentation is signed, completion of the acquisition shall remain subject to merger control clearance and other customary conditions and shall be submitted to Lectra shareholders for approval.

The proposed combination would occur at an opportune time for both companies and their customers. The current uncertain economic climate and unprecedented challenges that fashion, automotive and furniture companies are facing due to the COVID-19 pandemic make it more important than ever for them to transform, digitalize and optimize their operations.

For over 50 years, Gerber Technology has used its proprietary technologies and deep domain expertise to provide integrated software and automated hardware solutions to companies around the world, including over 100 Fortune 500 companies in 134 countries.

The strategic combination of Gerber Technology and Lectra will create a premier advanced technology partner, able to quickly meet changing customer needs and deliver even more value through seamlessly integrated solutions. Together, the two companies will have a large installed base of product development software and automated cutting solutions in operation, with a worldwide presence and a long list of prestigious customers.

Consolidating the two companies’ research and development capabilities will enable the combined company to accelerate development of Industry 4.0 technologies and help its expanded customer base seize the full potential of these innovations.
Integrating the technology of the two companies will endow them with the resources to anticipate and address rapidly changing market conditions.

Key transaction terms

Under the proposed acquisition, Lectra would acquire all outstanding shares of Gerber Technology on a cash-free debt-free basis for an upfront payment of 175 million euros – through a combination of cash and debt – plus 5 million newly issued Lectra shares to AIPCF VI LG Funding, LP (“AIPCF VI LG”), an affiliate of American Industrial Partners that is Gerber Technology’s sole shareholder. This would represent a total amount of about 300 million euros based on Lectra’s closing share price on February 5, 2021. No contingent consideration is contemplated.

Gerber Technology’s revenues was 165 million euros in 2020.

Thanks to the strong value creation deriving from significant synergies, Lectra expects the transaction to be accretive for shareholders from 2022.

Upon closing, Daniel Harari would own c. 14.6% of the Lectra shares and AIPCF VI LG would own c. 13.3%.

Lectra’s Board of Directors would welcome a director representing AIPCF VI LG.

Daniel Harari would continue to be the Chairman and Chief Executive Officer of Lectra. Gerber Technology Chief Executive Officer, Mohit Uberoi, would assume special advisor to Daniel Harari role until end-2021.

Lectra’s shareholders would be invited to vote on the issuance of the 5 million new Lectra shares reserved to AIPCF VI LG at a dedicated Extraordinary Shareholders’ Meeting which is currently expected to be held on April 30, 2021. A report containing additional information will be made available to the shareholders prior to the Extraordinary Shareholders’ Meeting.

Lazard is acting as exclusive financial advisor to Lectra, and Latham & Watkins as legal counsel to Lectra.

Goldman Sachs is acting as exclusive financial advisor to AIPCF VI LG, and Ropes & Gray LLP, Baker Botts LLP and Gide Loyrette Nouel A.A.R.P.I. as legal counsel to AIPCF VI LG.

2020 results, update on the 2020-2022 strategic roadmap and guidance for the coming years will be disclosed on February 10, 2021.

Lectra management will discuss the transaction, provide forward-looking guidance for the combined company upon closing of the transaction and answer questions from the financial community during the February 11, 2021 webcast Analyst Conference meeting in French starting at 8:30 am (CET - Paris).

• New digital platform unveiled
• Due to the continued impact of the Covid-19 pandemic and after thorough consultation of clients and partners, the JEC World team today announces that the next edition of JEC World is postponed from March 9 to 11 to June 1 to 3, 2021.

With the growing concern among our exhibitors and partners surrounding the critical situation of the Covid  19,  travel  restrictions,  quarantine,  and  lockdown  measures  announced  recently  in  many  countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in safer conditions in 2021.

Thus, JEC World exhibitors answered a survey proposing three dates to determine which one would suit  them  the  most.  It  appeared  that  a  large  majority  of  respondents  favored  holding  the  next  JEC  World session from June 1 to 3, 2021."We truly regret having to make this difficult decision. However, we are all committed, starting todayto deliver the best JEC World experience to our clients.  We look forward to welcoming the international composites community back to Paris in June 2021", says Eric Pierrejean, CEO of JEC Group. As the leading trade show of the composites industry, JEC World brings together the whole composites materials  value  chain  and  professionals  from  application  sectors,  experts  from  the  scientific  and  academic world, associations and media from more than 112 countries.

JEC  World  is  also  proud  to  introduce  its  audience  this  year,  its  new  digital  platform,  JEC  World  Augmented.

This online platform, programmed to take place alongside JEC World,istailored primarily for attendees who cannot be present physically at the show but still want to experience a tremendousdigital event immersion. "JEC  World  and  its  augmented platform  will  bring  the  international  composites  community  and  specialists   together   to   network   with   exhibitors,   hold   digital   business   meetings,   access   online   conferences, workshops, and discover the latest composites innovation,"  says Adeline Larroque, Show director and EMEA events. "Now, more than ever, the international composites sector needs to come together to discuss today's challenges and tomorrow's composites solutions," adds Larroque.

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

Daniel He describes the situation: „The Chinese market is picking up again; a price increase of 7% for glass fibers was announced right before the China Composites Show, on August 25th 2020, which was even leading to a temporary material shortage. Today, the most booming industries in China are wind energy, building and infrastructure and innovation for electric cars. Unlike the rest of the world, where the aircraft industry undergoes a deep decline, in China it takes up by 50 %, which is very promising. Furthermore, we expect half a year for a full recovery of the industry, while the China growth of 2020 is still expected to be between 2 and 4 %.“

Michael Effing replied: “Enabling the composites business between China and Europe is the aim of our cooperation with Reach and with our customers, which are active in digital automatization, testing equipment or cost optimization software. We are very happy to have been present in China through our representant Reach and are looking forward to bridge and overcome the Covid-19-crisis with our upcoming event in Germany, the Composites for Europe in Stuttgart in November and hope to be back to full global business speed at the JEC in Paris in 2021.“

Shanghai - Sateri has signed the Fashion Industry Charter for Climate Action, becoming the first viscose producer in China to support this global fashion agenda. An initiative convened by the United Nations Framework Convention on Climate Change (UNFCCC), this charter calls on the fashion industry to support the goals of the Paris Agreement in limiting global temperature rise to well below two degrees Celsius above pre-industrial levels, by achieving 30 per cent aggregate reduction in greenhouse gas (GHG) emissions by 2030, including the supply chain.

Niclas Svenningsen, Manager of Global Climate Action, UNFCCC, said, “UNFCCC is excited to have Sateri joining the Fashion Industry Charter on Climate Action and committing towards global climate action as the first Chinese viscose producer to do so. We hope that it will inspire more textile companies from China to join and take action.”

As a signatory of the Charter, Sateri looks forward to participating in relevant Working Groups which bring together stakeholders and experts in the fashion and textile sectors. In recent months, Sateri has joined several other leading industry multi-stakeholder associations. These include the Sustainable Apparel Coalition (SAC), China Association of Circular Economy (CACE), and the European Disposables and Nonwovens Association (EDANA).

Allen Zhang, President of Sateri, said, “Sateri is committed to growing our business as sustainably as we can. Our adoption of the Fashion Charter goals is a bold leap but we believe that pushing the boundaries is necessary. We are also stepping up on our engagement with industry partners to be part of the collective action to accelerate efforts against climate change.  As we formulate Sateri Vision 2030 for a sustainable business, carbon reduction will be one of our key focus areas”.

In addition to stepping up greenhouse gas emission reductions in its own operations, the company will continue to support decarbonisation efforts of the downstream textile value chain. Late last year, in collaboration with the China National Textile and Apparel Council (CNTAC), a Climate Leadership Whitepaper was published. The paper analysed how innovation in Sateri’s EcoCosy® fibre products help reduce carbon emission during yarn and fabric manufacturing stages, and also proposed next steps in achieving industry-wide emission reduction goals.   

Sateri attained an ‘A-‘ score in CDP (formerly Carbon Disclosure Project) for Climate Change in 2019;  a score which is higher than the ‘C’ average globally, in Asia, as well as in the Textiles and Fabric Goods sector. 

TESCA and Willy SCHMITZ announce that they have closed a transaction whereby TESCA is acquiring the business of Willy SCHMITZ and its operations, located in Germany.

TESCA, headquartered in Paris France, is a major supplier of automotive fabrics, value added textile parts and seating components. TESCA employs 3,500 people and operate 22 facilities globally.

Willy SCHMITZ, headquartered in Monchengladbach, Germany is a major supplier of fabrics to the German automotive manufacturers, but also to other industries, including via its affiliated company OGUS. Willy SCHMITZ employs 150 people and operates in two facilities in Germany.

“The TESCA and Willy SCHMITZ businesses are very complementary in terms of customer interface and geography”, said Carl de Freitas, TESCA CEO. “Merging our activities will provide a broader more efficient platform to support our customers globally.”

Riri and Coeurdor announce that they are creating the largest metal accessories group dedicated to the high-end luxury brands. The combination of the two companies will result in a unique value proposition, offering the full range of metal trims. This will allow luxury brands to simplify their supply-chain and benefit from unique innovation capabilities, including new technology like 3D printing and stainless steel. They will also rely on a production network that spans from France, Italy, Switzerland to Portugal, offering maximum flexibility and security of supply adapted to the fashion market requirements.

Founded in 1951 and headquartered in Maîche (France), Coeurdor is a manufacturer of metal accessories for the luxury industry. The company is specialized in surface finishings and manufacture of metal products for Luxury leather goods, with production facilities in France and Portugal. The company is well-known for the quality of its products, its innovation capabilities and strong customer relationships.

Founded in 1936 and headquartered in Mendrisio (Switzerland), Riri is a well-known brand, producing zippers and buttons, through Riri and Cobrax brands, mostly for the high-end luxury market. Riri is the privileged choice of many brands in light of high quality of the creations released season after season, ever-ending effort in terms of innovation, personalization of details and high service levels. The company has a world commercial presence, with commercial offices in Paris, New York City, Los Angeles, Hong Kong and Shanghai and four manufacturing sites across Switzerland and Italy.

Robert Jeambrun, Chairman of Coeurdor said: “We are very excited to open this new chapter of our history together with Riri. We believe the two organizations share the same values, including a focus on innovation and dedication to high service levels for our customers. Crossing our path with Riri will enable us to continue our growth story and increase our financial means, becoming the supplier of choice of high-end luxury brands.”

Renato Usoni, CEO of Riri Group said: “We are welcoming the Coeurdor family. The alliance of the two groups will create a new leader in the market with a unique business model and industrial means capable of supplying all metal pieces needed by our clients, from zippers to buttons and metal trims, all at once. The combined offering will be highly synergetic and will allow our clients to better industrialize their supply chains and benefit from unique innovation capabilities.”