From the Sector

Reset
9 results
17.11.2021

C.L.A.S.S. welcomes Sensil® BioCare by NILIT into its material hub

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.

NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.

NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in  the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.

Source:

C.L.A.S.S.

06.09.2021

Textile and apparel industry alliance closer to an international microfibre shedding standard

A sector alliance that was formed to tackle issues relating to microplastics has completed the next phase of its project to develop a harmonised industry standard for the supply chain. The Cross Industry Agreement (CIA) has revealed the results of a fibre fragmentation trial that has been carried out in advance of establishing a CEN Standard (from the European Committee for Standardization). Once confirmed, the standard will also become an ISO standard under the Vienna Agreement, providing apparel manufacturers and policy makers with a vital tool as part of wider work to reduce microfibre shedding into the environment.

A sector alliance that was formed to tackle issues relating to microplastics has completed the next phase of its project to develop a harmonised industry standard for the supply chain. The Cross Industry Agreement (CIA) has revealed the results of a fibre fragmentation trial that has been carried out in advance of establishing a CEN Standard (from the European Committee for Standardization). Once confirmed, the standard will also become an ISO standard under the Vienna Agreement, providing apparel manufacturers and policy makers with a vital tool as part of wider work to reduce microfibre shedding into the environment.

In 2018, five industry organisations agreed to join forces to proactively tackle the issue of microplastics, and signed the Cross Industry Agreement. The initial signatories were European industry associations that represent the European and global value chains of garments and their associated maintenance – the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.), European Man-Made Fibres Association (CIRFS), European Outdoor Group (EOG), EURATEX the European apparel and textile industry confederation, and the Federation of the European Sporting goods Industry (FESI). Together, the five organisations understood that the very first step to enable global action around the topic, was to agree a harmonised test method which would allow the collection and comparison of globally generated data, to aid the identification of solutions.

The microfibre shedding test method was developed thanks to the joint efforts and cooperation of experts from 28 European, American and Asian organisations; the result was handed over to CEN in 2020. Since then, representatives from the CIA have been working with CEN to fine tune details in order to meet the requirements for a CEN Standard. To verify the reproducibility of the method, the partners have carried out a round robin trial (RRT) to determine if the method could be replicated in different laboratories and produce similar results. 10 organisations participated in the RRT, which was co-ordinated by the CIA, sending fabric samples to all of the laboratories involved and then collecting and analysing the data.

The results from the RRT show statistically significant consistency, both within and between participating laboratories, which demonstrates that the method is both repeatable in the same setting and reproducible in other laboratories.

The CIA has submitted the results of the RRT to CEN, with the intention that the CEN Standard is confirmed in the near future. Once that has happened, it will be promoted throughout the apparel industry and will become a key tool for researchers, businesses and governments as they accelerate efforts to reduce microfibre shedding associated with garment production.

Source:

Euratex

ANDRITZ receives order for needlepunch production lines from Chongqing Double Elephant, China (c) ANDRITZ
25.03.2021

ANDRITZ receives order for needlepunch production lines from Chongqing Double Elephant, China

International technology Group ANDRITZ has received an order to supply four new needlepunch lines for nonwoven production from Chongqing Double Elephant Microfiber Material Co., Ltd., China. These lines are scheduled for installation and start-up in the fourth quarter of 2021.

The needlepunch lines by ANDRITZ are designed to process islands-in-the-sea fibers dedicated mainly to the production of high-quality synthetic leather products. Once completed, the lines will produce 30 million meters a year of microfiber nonwoven materials.

International technology Group ANDRITZ has received an order to supply four new needlepunch lines for nonwoven production from Chongqing Double Elephant Microfiber Material Co., Ltd., China. These lines are scheduled for installation and start-up in the fourth quarter of 2021.

The needlepunch lines by ANDRITZ are designed to process islands-in-the-sea fibers dedicated mainly to the production of high-quality synthetic leather products. Once completed, the lines will produce 30 million meters a year of microfiber nonwoven materials.

The production lines are equipped with an ANDRITZ carding machine and the newly developed Profile® crosslapper as well as the advanced-technology ProWid closed-loop system from ANDRITZ. The system can monitor the weight uniformity (CV%) of the entire product online and predict the weight distribution changes caused by the bonding process. In addition, the web weight can be reduced by controlled stretching, which solves the issue of fiber accumulation at the edges caused by traditional crosslapping methods. Both the weight and the uniformity of the product can be automatically adjusted via the closed-loop function as set on the ANDRITZ gauge.

Chongqing Double Elephant Microfiber Material Co., Ltd., wholly owned by listed Wuxi Double Elephant Microfiber Materials Co., Ltd., is located in the Changshou National Economic and Technological Development Zone of Chongqing City. The company is active in the research, development and manufacture of microfiber materials, polyurethane synthetic leather and polyurethane resin.

Source:

ANDRITZ AG

Oerlikon: Three staple fiber bicomponent systems successfully commissioned in Asia (c) Oerlikon Neumag
Oerlikon Neumag staple fiber plants stand for highest product quality and absolute reliability.
27.08.2020

Oerlikon: Three staple fiber bicomponent systems successfully commissioned in Asia

Neumünster – Oerlikon Neumag has successfully commissioned three staple fiber bicomponent systems in China. With capacities of 50 tons per day each, the systems are being used to manufacture coresheath bicomponent fibers made from PP/PE or PET/PE at two long-standing Oerlikon Manmade Fibers customers. These fibers are used to make hygiene products.

Oerlikon Neumag staple fiber technology still in demand

Despite coronavirus-related restrictions, the three new systems were installed within three and five months, all without any problems. They have meanwhile been operating under stable production conditions with optimum fiber quality of the very highest standards for several weeks now.

Many years of experience in bi-component spinning

Neumünster – Oerlikon Neumag has successfully commissioned three staple fiber bicomponent systems in China. With capacities of 50 tons per day each, the systems are being used to manufacture coresheath bicomponent fibers made from PP/PE or PET/PE at two long-standing Oerlikon Manmade Fibers customers. These fibers are used to make hygiene products.

Oerlikon Neumag staple fiber technology still in demand

Despite coronavirus-related restrictions, the three new systems were installed within three and five months, all without any problems. They have meanwhile been operating under stable production conditions with optimum fiber quality of the very highest standards for several weeks now.

Many years of experience in bi-component spinning

Oerlikon Neumag looks back on many years of experience in constructing bicomponent staple fiber systems. The first system for this fiber type was commissioned as far back as 1995. Oerlikon Neumag offers solutions for the most varied cross-sections, ranging from sheath/core’, ‘side-by-side’, ‘island in the sea’, ‘orange type’ as well as ‘trilobal’. The applications are diverse: from self-crimping fibers, bonding fibers, super-microfibers all the way through to hollow fibers.

The Oerlikon Neumag bicomponent technology is particularly characterized by the extremely robust spin packs that have no expensive wear parts, which considerably reduces the costs here. The reconditioning costs when cleaning the spin packs are kept to an absolute minimum. Add to this the separate temperature transfer option in the spinning beam for the two polymers. As a result, the quality and the viscosity of the polymers can be accurately adjusted in accordance with the respective process requirements.

Source:

Oerlikon Neumag

Oerlikon (c) Oerlikon
15.08.2019

Oerlikon: Further EvoQuench PA POY systems destined for China

Oerlikon Barmag recently signed contracts for two orders with a total of 120 spinning positions for manufacturing polyamide POY yarn with Chinese yarn manufacturers. What makes this so special is the fact that all positions will be equipped with the EvoQuench radial quenching system for polyamide.

With this, two well-known yarn manufacturers are now committing to the EvoQuench concept to produce polyamide yarn, equipping themselves for the efficient manufacture of microfiber yarns in the process. The benefits of radial quenching vis-à-vis conventional cross-flow quenching when manufacturing microfibers are well-known from polyester processing: manufacturing outstanding quality in a more production-reliable manner, i.e. with fewer yarn breaks, is a convincing argument and makes producing polyamide microfibers considerably more efficient. “Used to create fabrics, the materials feel very pleasant to the touch”, comments Stephan Faulstich, Head of Development POY Process at Oerlikon Barmag, who has held the results of the currently sole operator of such a system in his hands. “I can imagine this will be used above all in the manufacture of sports apparel and underwear.”

Oerlikon Barmag recently signed contracts for two orders with a total of 120 spinning positions for manufacturing polyamide POY yarn with Chinese yarn manufacturers. What makes this so special is the fact that all positions will be equipped with the EvoQuench radial quenching system for polyamide.

With this, two well-known yarn manufacturers are now committing to the EvoQuench concept to produce polyamide yarn, equipping themselves for the efficient manufacture of microfiber yarns in the process. The benefits of radial quenching vis-à-vis conventional cross-flow quenching when manufacturing microfibers are well-known from polyester processing: manufacturing outstanding quality in a more production-reliable manner, i.e. with fewer yarn breaks, is a convincing argument and makes producing polyamide microfibers considerably more efficient. “Used to create fabrics, the materials feel very pleasant to the touch”, comments Stephan Faulstich, Head of Development POY Process at Oerlikon Barmag, who has held the results of the currently sole operator of such a system in his hands. “I can imagine this will be used above all in the manufacture of sports apparel and underwear.”

More information:
Oerlikon Polyamidfaser
Source:

Oerlikon

Screen capture of Archroma’s video on Archroma's Fast Sport based on Foron® SP-WF, a range of high wet-fast disperse dyes for sportswear and active wear applications. © Archroma
10.07.2019

ARCHROMA: New Range for High Wet-Fast Color in Sportswear

Reinach, Switzerland  - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, recently launched at the ITMA exhibition its new Foron® SP-WF, a range of high wet-fast disperse dyes for sportswear and active wear applications.

The Foron® SP-WF dyes are especially suited for the coloration of polyester fibers and microfibers, and polyester/elastane blends, in exhaustion application.
The Foron® SP-WF dyes were developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Reinach, Switzerland  - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, recently launched at the ITMA exhibition its new Foron® SP-WF, a range of high wet-fast disperse dyes for sportswear and active wear applications.

The Foron® SP-WF dyes are especially suited for the coloration of polyester fibers and microfibers, and polyester/elastane blends, in exhaustion application.
The Foron® SP-WF dyes were developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

The new product is at the core of Archroma's Fast Sport, a coloration system for polyester knitted sportswear, providing the best fastness in the shortest possible time with a reduced environmental footprint.
The Foron® SP-WF range which includes primary and ternary color grades has been developed to fulfil the high color wet fastness and performance requirements of sportswear manufacturers and brands.
Moreover, the core ternary color grades enable deep shades at lower dyeing temperatures on sensitive polyester/elastane fabrics without causing excessive fiber damage, saving energy resources and meeting the high fastness demand of leading brand companies.

When using Foron® SP-WF dyes as part of the Fast Sport system, manufacturers can in many cases have the potential to significantly reduce their consumption of time, energy, chemical, and water, as well as their CO2 emissions.

“We see a growing demand for apparel in the sportswear and active wear segment, reinforced with the now installed athleisure trend,” says Mark Dohmen, Head of Archroma’s Competence Center Automotive and Synthetic Dyes. “Consumers want deep color that stays put on the fiber and brands are defining their requirements accordingly. With our Foron® SP-WF, we can offer to manufacturers of sportswear textiles a solution that combines high levels of wet fastness with high productivity and low resource consumption. Because it’s our nature!”

More information:
Archroma Sportswear Fibers
Source:

Archroma

Huntsman Textile Effects  (c)Huntsman Textile
UNIVADINE® E3-3D
07.09.2018

Huntsman Textile Effects introduces UNIVADINE® E3-3D

  • Huntsman Textile effects redefines dyeing of polyester including microfiber and blends with UNIVADINE® E3-3D diffusion accelerant
  • Eco-friendly diffusion accelerant provides reproducible, high-speed polyester dyeing

Singapore – Huntsman Textile Effects introduces UNIVADINE® E3-3D next-generation diffusion accelerant to help mills achieve high-performance dyeing of polyester, microfibers and blends in an environment-friendly way that complies with current and anticipated industry sustainability standards.

The demand for polyester and man-made fibers is booming as sports and athleisure apparel markets expand rapidly around the world. At the same time, big-name brands that set trends in the sector continue to increase focus on sustainability and performance. As such, this is putting pressure on mills since the current industry standard involves chemically active diffusion accelerants that contain unwanted chemicals and require additional leveling agents and anti-foaming products that may be hazardous to people and the environment.

  • Huntsman Textile effects redefines dyeing of polyester including microfiber and blends with UNIVADINE® E3-3D diffusion accelerant
  • Eco-friendly diffusion accelerant provides reproducible, high-speed polyester dyeing

Singapore – Huntsman Textile Effects introduces UNIVADINE® E3-3D next-generation diffusion accelerant to help mills achieve high-performance dyeing of polyester, microfibers and blends in an environment-friendly way that complies with current and anticipated industry sustainability standards.

The demand for polyester and man-made fibers is booming as sports and athleisure apparel markets expand rapidly around the world. At the same time, big-name brands that set trends in the sector continue to increase focus on sustainability and performance. As such, this is putting pressure on mills since the current industry standard involves chemically active diffusion accelerants that contain unwanted chemicals and require additional leveling agents and anti-foaming products that may be hazardous to people and the environment.

Developed by Huntsman Textile Effects specifically to meet these challenges, UNIVADINE® E3-3D diffusion accelerant is low-odor, free of benzyl benzoate and other hazardous substances. Part of Huntsman’s range of innovative dyEvolution™ dyeing auxiliaries, it uses Huntsman’s Active Diffusion Technology to enable high-speed dyeing with best-in-class leveling, retarding and migration properties.

“UNIVADINE® E3-3D diffusion accelerant delivers across three key dimensions – diffusion, leveling and migration – for exceptional performance and environmental and economic sustainability. Its environmental credentials offer mills greater processing flexibility and an optimum price-performance ratio,” said Kerim Oner, Global Marketing Manager for Dyeing Auxiliaries at Huntsman Textile Effects. “We expect this latest offering to change the way that the industry dyes polyester and blends while meeting stringent environmental standards.”

UNIVADINE® E3-3D diffusion accelerant has a high affinity to polyester, causing the fiber to swell and increasing the diffusion of the disperse dye, even at lower temperatures. Multiple leveling mechanisms then slow down the exhaustion rate to ensure safe, defect-free dyeing. Finally, as the dye bath heats up, the product’s strong support for disperse dye migration ensures the dye molecules are evenly absorbed.

As a result of this cutting-edge diffusion technology, UNIVADINE® E3-3D diffusion accelerant can be used to successfully dye polyester fibers in tightly wound or high-density yarn/beam dyeing and is suitable for jet applications without the need for anti-foaming products. Reducing exposure to high heat, its Active Diffusion Technology minimizes the potential to damage the elastane in polyester-elastane blends and provides for on-tone dyeing of microfibers. The superior migration support of UNIVADINE® E3-3D diffusion accelerant also increases reproducibility, allowing mills to dispense with additional leveling agents. Polyester, microfibers and blends treated with UNIVADINE® E3-3D diffusion accelerant comply with the requirements of bluesign®, in addition to being suitable for Standard 100 by OEKO-TEX® and an approved input dyeing auxiliary chemical for GOTS (Global Organic Textile Standard) certified textile products*.

Source:

Huntsman Textile Effects

© Techtextil, Messe Frankfurt Exhibition GmbH
06.08.2018

Strong potential in Buildtech and Mobiltech sectors to be displayed at Cinte Techtextil China

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

  • FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
  • Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
  • Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
  • Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

  • Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
  • SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
  • Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
  • Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
  • Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
  • Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
  • Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.

Source:

Messe Frankfurt Exhibition GmbH

REGENERATED ECONYL® YARN (c) Schoeller Textil AG
REGENERATED ECONYL® YARN
16.06.2018

Schoeller: sustainability for textiles and technologies

For Schoeller Summer 2020 everything flows smoothly. The fabrics move with a fluid lightness in a closed ecological cycle. Upcycled products with ECONYL® yarn and the PFC-free ecorepel® Bio technology based on renewable raw materials are two ecological highlights of the 2020 Summer Collection, which is being developed and produced in the heart of the Swiss mountains. Color effects turn the functional textiles into exciting multicolors with contrasting reverses and fresh, modern plain colors that can easily be combined.

For Schoeller Summer 2020 everything flows smoothly. The fabrics move with a fluid lightness in a closed ecological cycle. Upcycled products with ECONYL® yarn and the PFC-free ecorepel® Bio technology based on renewable raw materials are two ecological highlights of the 2020 Summer Collection, which is being developed and produced in the heart of the Swiss mountains. Color effects turn the functional textiles into exciting multicolors with contrasting reverses and fresh, modern plain colors that can easily be combined.


REGENERATED ECONYL® YARN
The textiles manufactured by Schoeller using ECONYL® yarn made from regenerated material are genuine upcycled products. The ECONYL® Reclaiming Program of Aquafil S.P.A. reduces global waste by collecting recyclable materials from landfill sites and the world’s oceans and returning them into the production cycle. The resulting yarn is no different from conventional textiles in terms of quality and appearance. The Schoeller fabric family with ECONYL® yarn encompasses a complete package with diverse exciting qualities such as ultra-light, bi-elastic schoeller®-dynamic (e.g. for windbreaker blousons), very soft, fine schoeller®-dryskin (e.g. for high-tech shorts) and lightweight schoeller®-WB-400.


ECO-CREATED
New, supersoft soft-shells with ECONYL® yarn are available with different backings and weights depending on the situation. The lightest schoeller®-WB-400 radiates a sense of summer in fresh tones such as melon, oxygen blue or khaki with a smooth jersey reverse in contrasting colors, also made from ECONYL® yarn. A slightly heavier quality surprises in classic black with an elegant, navy blue reverse, while the Bordeaux nuance of the soft-shell with its brushed reverse in stone grey feels warm, soft and cozy. The fluorocarbon-free ecorepel® bio-technology, based on renewable raw materials, offers sustainable water repellence.


WHITE MATTER
The dominant features of summer 2020, alongside sustainable textiles and technologies made from natural materials, are inspired multicolors. The comfortable, multicolored schoeller®-WB-400 qualities produce completely new color effects and create a cheerful look – both for outdoor activities and in urban sportswear. The combination of melon, ocean green and stone grey with white changes the mood of the original colors and lends the textiles an unexpectedly chalky, summery look. Another striking feature is the lightweight, white jersey backing, which is only revealed at second glance.


AUGMENTED ORIGINALS
The presentation of the authentic schoeller®-dynamic qualities is no less lively, ranging from mossy green tones and blue nuances through to the brown variations of tree bark. The multicolors combine perfectly with plain fabrics and are impressively functional thanks to the PFC-free ecorepel® bio-technology, which also provides reliable water repellence. The basic qualities of the lightweight schoeller®-dryskin trousers and jackets are given a touch of elegance in the form of a discreet sheen and fashionable colors. In soft blues and greens, these supple all-rounders are highly wear resistant and offer ideal moisture management through the microfibers on the inside. They also feature ecorepel® bio-technology for water repellence.