From the Sector

Reset
54 results
Oerlikon Barmag systems convince with product diversity (c) Oerlikon
From super-low-shrinkage (SLS) through to high-tenacity (HT): depending on the configuration, Oerlikon Barmag systems are suitable for manufacturing industrial yarns with the most diverse properties.
25.06.2020

Oerlikon Barmag systems convince with product diversity

  • Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

  • Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

As a quality-conscious industrial yarn producer, Kingsway has been manufacturing its sophisticated, high-end yarns on Oerlikon Barmag filament yarn systems since 2015. Alex Yang Yu Long, CEO of Kingsway, is proud of relying on engineering artistry from Remscheid: “As expected, the yarns are first-class in terms of quality. Our products are used in safety equipment, sometimes in situations where lives depend on them. Therefore, there can be no compromises. To this end, we select our partners with the utmost care."

More information:
Oerlikon yarn industrial yarns
Source:

Oerlikon Manmade Fibers

Photo: Shutterstock
18.06.2020

VDMA starts technology webtalks for the textile industry

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

More information:
VDMA
Source:

VDMA 
Textile Machinery

Oerlikon Manmade Fibers opens new sales and service office in Shanghai, China (c) Oerlikon
This building is now home to the employees of Oerlikon's Manmade Fibers segment: The Place, Tower A, 100 Zunyi Road, Changning District, Shanghai China 200051.
11.06.2020

Oerlikon Manmade Fibers opens new sales and service office in Shanghai, China

  • "Even closer to our customers"

After more than eight years in the Intercontinental Business Center on Yutong Road in Shanghai, China, the Manmade Fibers segment has now opened a new sales and service office in the metropolis of millions near the international airport in Hongqiao and the National Exhibition and Convention Center (NECC).

The Manmade Fibers segment in China now officially operates under the following address:

Oerlikon (China) Technology Co. Ltd.
Shanghai Branch
RM1208-1210, Tower A, The Place,
100 Zunyi Road, Changning District
Shanghai China 200051

The main reason for the change from Yutong Road to the new address on Zunyi Road was the logistical aspects in a city that has had to cope with increasingly heavy traffic in recent years. "Now we are even closer to our customers," explains Wang Jun, Oerlikon China President. The proximity to Hongqiao airport and the Hongqiao railway station with its high-speed trains will provide the sales and service staff with even better infrastructure connections.

  • "Even closer to our customers"

After more than eight years in the Intercontinental Business Center on Yutong Road in Shanghai, China, the Manmade Fibers segment has now opened a new sales and service office in the metropolis of millions near the international airport in Hongqiao and the National Exhibition and Convention Center (NECC).

The Manmade Fibers segment in China now officially operates under the following address:

Oerlikon (China) Technology Co. Ltd.
Shanghai Branch
RM1208-1210, Tower A, The Place,
100 Zunyi Road, Changning District
Shanghai China 200051

The main reason for the change from Yutong Road to the new address on Zunyi Road was the logistical aspects in a city that has had to cope with increasingly heavy traffic in recent years. "Now we are even closer to our customers," explains Wang Jun, Oerlikon China President. The proximity to Hongqiao airport and the Hongqiao railway station with its high-speed trains will provide the sales and service staff with even better infrastructure connections.

Furthermore, the local repositioning also takes into account the changes within the Oerlikon Group. "The divestments made within the Oerlikon Group in recent years have now led to a reorganization here in Shanghai. Today, Oerlikon's business activities in China focus exclusively on the segments Manmade Fibers and Surface Solutions incl. Additive Manufacturing. The time had come to set up the best possible infrastructure for optimum customer service for both business segments," continues Wang Jun. In addition, in the age of digitalization, sales and service employees in China are increasingly able to work from home. All of this has now led to a changed, adapted and, last but not least, cost-optimized reorganization.

10.06.2020

“Autoneum Pure.”: new sustainability label for products

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Autoneum Pure is based on a comprehensive set of criteria assessing the sustainability performance of a product in all four phases of its life cycle: material procurement, production, use and end of life. For example, components with a high content of recyclable materials or those that achieve significant weight savings compared to comparable standard components qualify for the “Autoneum Pure.” label. Autoneum already offers various multifunctional technologies that meet the high standards for Autoneum Pure products: Ultra-Silent for underbody systems or battery undercovers, Di-Light for carpet systems, Prime-Light and IFP-R2 for inner dashes and floor insulators as well as Hybrid-Acoustics PET for e-motor encapsulations and engine-mounted parts, which was launched in fall 2019.

With Mono-Liner, the latest innovation for wheelhouse outer liners is also included in the Autoneum Pure portfolio. Among other things, the Mono-Liner-based components convince thanks to their lightweight construction, thereby contributing to lower vehicle weight with correspondingly less fuel consumption and emissions. The excellent life cycle assessment is also based on their particularly resource-saving manufacturing: Production cut offs of the components, which consist to a large extent of recycled PET fibers, can be processed into pellets and completely returned to the manufacturing process as fibers. An SUV and a crossover model from a US vehicle manufacturer already benefit from Mono-Liner wheelhouse outer liners.

Anahid Rickmann, Head of Corporate Communications & Responsibility, explains: “With Autoneum Pure we are the first automotive supplier to establish a sustainability label in the field of acoustic and thermal management. Autoneum Pure is part of the Company's Advance Sustainability  Strategy 2025 and sets industry standards in product communication.”

Source:

Autoneum Holding AG

 New Recycled Fibre FinexTM in Stores; Sateri Partners Fashion Brands to Unveil Product (c) Finex
Finex Circularity Model
08.06.2020

New Recycled Fibre FinexTM in Stores; Sateri Partners Fashion Brands to Unveil Product

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

“We’re pleased to collaborate with Sateri as one of their first brand partners for FinexTM. Sateri’s dedication to this partnership made it possible for Lafuma to produce T-shirts with this fine quality fibre in a short time. T-shirts made with FinexTM will be among the offerings Lafuma has in store for the 618 festival as we look to support environmentally-friendly and excellent performance solutions to strengthen our position as a leading outdoor apparel brand,” said Wu Qian, General Manager of Lafuma China.

Echoing similar sentiments is Rico Lee who established his own independent label in 2014, “I jumped at the opportunity to collaborate with Sateri when they approached me because FinexTM encapsulates what my brand stands for – Beautiful Technology that combines function and fashion.”

Tom Liu, Sateri’s Commercial Vice President said, “Like our flagship brand EcoCosy®, FinexTM is made from bio-based natural fibres. Innovation and technology has made cellulosic textile fibre recycling possible and FinexTM represents how nature not only renews itself but that products made from nature can also be regenerated. This, at its heart, is what circular fashion looks like. Our brand promise to customers remains constant– Sateri’s products are sustainable, high quality, efficient, and cost-effective. The FinexTM tagline ‘Together For A Better Next’ expresses our aspiration to be the partner of choice for next-generation fibre - we thank Lafuma and Rico Lee for pioneering with us on this quest.”

Last month, Sateri announced its entry into China’s Lyocell fibre market. The recent string of product portfolio expansion announcements is underpinned by Sateri’s business strategy to capture value. Allen Zhang, President of Sateri said, “Being the world’s largest viscose producer gives us the advantages that come with volume, but value is what we hope differentiates us. By this, we don’t only mean higher value products like Lyocell or FinexTM but also the value we bring to communities, country, climate and customers.”

Globally, less than 1% of material used to produce clothing is recycled into new clothing. This presents a big opportunity for textile fibre recycling, particularly in China which is the largest textile producing country in the world. Last month, Sateri became a council member of the China Association of Circular Economy (CACE). The company will work closely with CACE’s Textile Waste Comprehensive Utilisation Committee to establish standards and promote industrial-scale textile waste recycling. Sateri is part of the Singapore-based RGE group of companies which has committed USD200 million into next-generation textile fibre innovation and technology.

(c) BMW Group
21.04.2020

SGL Carbon receives contract for battery enclosure from BMW Group

  • New composite e-Mobility application
  • Multi-year substantial contract

After prototypes for a Chinese automotive manufacturer, a major order from a North American automaker, and yet another order for a European sports car manufacturer, SGL Carbon has now been nominated by BMW Group to produce a cover component for battery enclosures in series. This substantial multi-year order will include the production of an innovative glass-fiber-based cover plate for the battery housing for usage in a future plug-in hybrid model of BMW Group.

  • New composite e-Mobility application
  • Multi-year substantial contract

After prototypes for a Chinese automotive manufacturer, a major order from a North American automaker, and yet another order for a European sports car manufacturer, SGL Carbon has now been nominated by BMW Group to produce a cover component for battery enclosures in series. This substantial multi-year order will include the production of an innovative glass-fiber-based cover plate for the battery housing for usage in a future plug-in hybrid model of BMW Group.

Materials made of composites are suited for battery enclosures for different reasons: Besides their light weight, which enhances the electric vehicle’s range, fiber-reinforced plastics offer high stiffness. In addition, they meet high requirements for water and gas tightness and feature excellent fire protection properties. Composite materials can also help to achieve improved structural stiffness of the underbody, e.g. to protect against penetration, as well as an optimized thermal management. Carbon fibers are ideal for especially stressed structures or load-bearing elements, such as the underbody panels and side frames. For components subjected to less stress, such as battery box covers, glass fibers or a fiber mix may suffice.

In addition to the new application for the hybrid model battery enclosure, SGL Carbon will continue producing the usual components made of carbon-fiber-reinforced plastic for the BMW i3 and delivering materials for the Carbon Core body of the BMW 7 series, and has been nominated as the supplier for all carbon materials - fibers, textiles, stacks - for the BMW iNEXT, set to be launched in 2021.

Source:

SGL CARBON SE

Meltblown Vliesstoffanlagen von Oerlikon Nonwoven (c) Oerlikon Manmade fibers
Meltblown Vliesstoffanlagen von Oerlikon Nonwoven
02.04.2020

Oerlikon Nonwoven large-scale meltblown sold to Asia

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

The demand for filtration nonwovens for medical applications has risen tremendously across the globe since the outbreak of the Sars-CoV-2 (coronavirus) epidemic, presenting all manufacturers with huge challenges. A meltblown system will be commissioning at the site of a leading Western European nonwovens producers as early as the second quarter of 2020. This system will be deployed exclusively in the manufacture of nonwovens for respiratory masks.

Due to the current state of emergency with regards to the local supply of face masks, Oerlikon Nonwoven is currently using its own laboratory system to produce electrostatically-charged filter media which are being sent to local small businesses and companies for the manufacture of face masks. 

 

More information:
Oerlikon Nonwoven
Source:

Oerlikon Manmade fibers

Logo oerlikon neumag
Oerlikon Neumag presents new thrust pad contacting device
26.03.2020

New thrust pad contacting device for the Baltic crimper

Less wear and superior fiber quality
Technological changes to Oerlikon Neumag’s Baltic crimper thrust pad contacting device have resulted in considerably reduced friction in the crimper rolls and hence less wear and fewer metal particles contaminating the crimped staple fibers.
Thrust pads close the gap between the crimper rolls on either side. Normally, these thrust pads are continually pressed – under high pressure – against the sides of the crimper rolls. Wear and metal debris on the thrust pads is the result of this constant contact. The metal debris can contaminate the fibers, something that is particularly undesirable in hygiene applications.

New thrust pad contacting device for reduced metal debris and greater durability
With the new system, the thrust pads are pressed against the rolls with less pressure and then fixed into place. This prevents fibers from being caught and the frictional force between the pressure disk thrust pad and the crimper roll is minimized. Pilot applications have demonstrated that metal debris from the pressure disks thrust pads is dramatically reduced, making them durable.

Less wear and superior fiber quality
Technological changes to Oerlikon Neumag’s Baltic crimper thrust pad contacting device have resulted in considerably reduced friction in the crimper rolls and hence less wear and fewer metal particles contaminating the crimped staple fibers.
Thrust pads close the gap between the crimper rolls on either side. Normally, these thrust pads are continually pressed – under high pressure – against the sides of the crimper rolls. Wear and metal debris on the thrust pads is the result of this constant contact. The metal debris can contaminate the fibers, something that is particularly undesirable in hygiene applications.

New thrust pad contacting device for reduced metal debris and greater durability
With the new system, the thrust pads are pressed against the rolls with less pressure and then fixed into place. This prevents fibers from being caught and the frictional force between the pressure disk thrust pad and the crimper roll is minimized. Pilot applications have demonstrated that metal debris from the pressure disks thrust pads is dramatically reduced, making them durable.

More information:
Oerlikon Neumag
Source:

Marketing, Corporate Communications & Public Affairs

New thrust pad contacting device for the Baltic crimper (c) Oerlikon
New thrust pad contacting device for the Baltic crimper
26.03.2020

Oerlikon: New thrust pad contacting device for the Baltic crimper

Less wear and superior fiber quality

Technological changes to Oerlikon Neumag’s Baltic crimper thrust pad contacting device have resulted in considerably reduced friction in the crimper rolls and hence less wear and fewer metal particles contaminating the crimped staple fibers.

Thrust pads close the gap between the crimper rolls on either side. Normally, these thrust pads are continually pressed – under high pressure – against the sides of the crimper rolls. Wear and metal debris on the thrust pads is the result of this constant contact. The metal debris can contaminate the fibers, something that is particularly undesirable in hygiene applications.

Less wear and superior fiber quality

Technological changes to Oerlikon Neumag’s Baltic crimper thrust pad contacting device have resulted in considerably reduced friction in the crimper rolls and hence less wear and fewer metal particles contaminating the crimped staple fibers.

Thrust pads close the gap between the crimper rolls on either side. Normally, these thrust pads are continually pressed – under high pressure – against the sides of the crimper rolls. Wear and metal debris on the thrust pads is the result of this constant contact. The metal debris can contaminate the fibers, something that is particularly undesirable in hygiene applications.

New thrust pad contacting device for reduced metal debris and greater durability
With the new system, the thrust pads are pressed against the rolls with less pressure and then fixed into place. This prevents fibers from being caught and the frictional force between the pressure disk thrust pad and the crimper roll is minimized. Pilot applications have demonstrated that metal debris from the pressure disks thrust pads is dramatically reduced, making them between three and seven times more durable.

More information:
Oerlikon
Source:

Oerlikon

Lenzing Logo (c) Lenzing
Lenzing Logo
20.03.2020

Lenzing Group’s Sustainability Report for 2019 published

  • First fiber producer to have an approved science-based target – CO2 neutrality by 2050
  • Breakthrough in REFIBRA™ technology – worn textiles can also be used as fiber raw material
  • Pioneer in the introduction of blockchain technology for fiber recognition
  • On track to meet all sustainability targets

Lenzing – Just ahead of the “Day of Forests ” on March 21, which the FAO (Food and Agricultural Organization of the United Nations) introduced in the 1970s in response to global deforestation, the Lenzing Group presents its Sustainability Report 2019. This sets out how the company is actively dealing with the global challenges.

Lenzing produces fibers from the renewable raw material wood and is well known among its customers and partners in the global textile and nonwoven fabric industry for the clear position it takes as a sustainable producer. It is no accident that the new report is appearing on the International Day of Forests. Lenzing’s sustainable practices in procurement, especially for wood and pulp, were once again ranked as leading in the 2019 reporting year (Hot Button Report).

  • First fiber producer to have an approved science-based target – CO2 neutrality by 2050
  • Breakthrough in REFIBRA™ technology – worn textiles can also be used as fiber raw material
  • Pioneer in the introduction of blockchain technology for fiber recognition
  • On track to meet all sustainability targets

Lenzing – Just ahead of the “Day of Forests ” on March 21, which the FAO (Food and Agricultural Organization of the United Nations) introduced in the 1970s in response to global deforestation, the Lenzing Group presents its Sustainability Report 2019. This sets out how the company is actively dealing with the global challenges.

Lenzing produces fibers from the renewable raw material wood and is well known among its customers and partners in the global textile and nonwoven fabric industry for the clear position it takes as a sustainable producer. It is no accident that the new report is appearing on the International Day of Forests. Lenzing’s sustainable practices in procurement, especially for wood and pulp, were once again ranked as leading in the 2019 reporting year (Hot Button Report).

“Stand up! A gainst business as usual ”

Under the motto “Stand up! Against business as usual ”, Lenzing emphasizes its wider responsibilities over and above its products. Business - as - usual scenarios have to be overcome, in particular for climate protection. With a science-based target, Lenzing is taking action to master the problems caused by climate change. The Lenzing Group is committed to reducing its greenhouse gas emissions per ton of product by 50 percent by 2030 (baseline: 2017). The Science-Based Target s initiative has approved Lenzing’s climate target as science-based.

Breakthrough in REFIBRA™ technology

One of Lenzing’s strategic principles under its “Naturally positive” sustainability strategy and a focus in the 2019 Sustainability Report is the circular economy. To address the enormous textile waste challenges of industry and society, Lenzing has developed a unique recycling technology branded REFIBRA™. This technology enables garment production waste to be reprocessed into fibers. 

 

 

More information:
Lenzing
Source:

Lenzing

Oerlikon logo (c) Oerlikon
Oerlikon logo
17.03.2020

Oerlikon wins three large manmade fibers orders in China

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.


 

Source:

Oerlikon

TERASIL® BLUE W DYE (C) Huntsman Corporation
11.03.2020

HUNTSMAN TEXTILE EFFECTS introduces TERASIL® BLUE W DYE

  • Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

  • Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Source:

Huntsman Corporation

TERASIL BLUE W (c) HUNTSMAN
TERASIL BLUE W
11.03.2020

HUNTSMAN TEXTILE EFFECTS INTRODUCES TERASIL® BLUE W DYE

A BREAKTHROUGH TECHNOLOGY FOR DYEING POLYESTER AND ITS BLENDS

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to our TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high-performance sportswear and athleisure wear. TERASIL® BLUE W stands out as the leading disperse wash fast blue dye in the market which is not sensitive to reduction, leading to higher reproducibility, right-first-time results and operational excellence.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

A BREAKTHROUGH TECHNOLOGY FOR DYEING POLYESTER AND ITS BLENDS

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to our TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high-performance sportswear and athleisure wear. TERASIL® BLUE W stands out as the leading disperse wash fast blue dye in the market which is not sensitive to reduction, leading to higher reproducibility, right-first-time results and operational excellence.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

With cutting-edge disperse dye technology at its heart, TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products(1).

More information:
Huntsman Textile Effects
Source:

HUNTSMAN

Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung. (c) Oerlikon Manmade Fibers
Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung.
27.02.2020

Oerlikon Manmade Fibers segment sets a trend with three Customer Days in India

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

And this was once again the case at the event held at the beginning of 2020, where around 450 managers and employees from local businesses took the opportunity to exchange ideas and information. For the third time in succession, Oerlikon also entered into dialog with the next generation of managers at major Indian polyester and nylon manufacturers in a separate event hosted in Mumbai beforehand. The technology symposium was again held – for the very first time – just a few days later and in a slightly modified form at a second venue: in Kolkata in West Bengal, a potential second future key location for manufacturing manmade fibers in India according to plans revealed by the Indian government. Here, the discussions held by the Oerlikon experts focused above all on the transfer of technologies for manufacturing polyester, nylon and polypropylene. Oerlikon is able to offer the entire process chain – from the melt to the textured yarn or the fibers and including the necessary semi- and fullyautomated logistics process – from a single source. This is of interest above all for potential new customers and investors in West Bengal and neighboring Bangladesh, as some do not have decades of expertise in manufacturing manmade fibers, as is the case for most companies in the region around Silvassa/Daman.

 

Source:

Oerlikon Manmade Fibers

Tailor-made large-scale fabrics production at SGL Carbon in Wackersdorf, Germany (c) SGL Carbon
Tailor-made large-scale fabrics production at SGL Carbon in Wackersdorf, Germany
07.02.2020

JEC World 2020: SGL Carbon presents new solutions

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

  •    Composite battery enclosures for e-mobility
  •    Flexible new leaf spring generation for rear axles
  •    Innovative component designs for passenger airplanes, helicopters and air taxis
  •    Extremely lightweight and stable transfer beam for mechanical engineering

Selective applications with focus on serial production
In the field of automotive applications, SGL Carbon will present at the JEC World composite battery enclosures as a promising new application driven by increasing demand for electric vehicles and the resulting new flexible chassis platforms. The company demonstrates a prototype of a battery enclosure based on carbon fibers. However, hybrid composites with a mixture of glass and carbon fibers are also possible.

In the aerospace sector, SGL Carbon is also expanding its portfolio of realized projects and expertise relying on the trend to use more efficient materials and processes in this industry too.
In the area of primary structure components, the company will present a demo exhibit for the door frame of a passenger airplane realized in collaboration with external partners and based on 50k carbon fiber from the SGL Carbon, which is suitable for serial production.

Live simulations and intense exchange at the booth
Visitors can experience live how their ideas can be implemented both sustainably and cost-effectively in composites thanks to simulations. Experts from the company’s own Lightweight and Application Center demonstrate the path from the concept to virtual prototypes using simulation software, with the result visible either to the entire audience or just individual visitors. To prepare, interested parties can contact the team now at the following link: https://www.sglcarbon.com/anmeldung-jec.

On March 4, 2020, the SGL Carbon stand will host its traditional get-together for customers and friends starting at 4 p.m. – no registration necessary.
 

More information:
SGL Carbon JEC World
Source:

SGL Carbon

Die BCF S8 setzt in punkto Farbseparation neue Standards. (c) Oerlikon Manmade Fibers.
Die BCF S8 setzt in punkto Farbseparation neue Standards.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Teppichgarne im Fokus

Mit einem klaren Fokus auf die Bedürfnisse des afrikanischen Marktes präsentiert sich das Oerlikon Manmade Fibers Segment vom 5. bis 8. März 2020 auf der Egy Stitch & Tex 2020 in Kairo. Auf dem Stand des Oerlikon Vertreters ATAG Export & Import in Halle 1, Standnummer B2 werden auch Experten von Oerlikon Barmag und Oerlikon Neumag as umfassende Produkt- und Serviceportfolio des Weltmarktführers für Chemiefasergarnanlagen erläutern.

Im Mittelpunkt stehen beim Messeauftritt des Oerlikon Segments Manmade Fibers zwei Kerntechnologien: Zum ersten Mal im afrikanischen Markt wird die neue Texturiermaschinengeneration eAFK Evo von Oerlikon Barmag vorgestellt. Sie verspricht eine höhere Geschwindigkeit und Produktivität bei konstant hoher Produktqualität, sowie einen geringeren Energieverbrauch und eine einfachere Bedienung als vergleichbare Marktlösungen. Unter den vielfältigen Features, die für spürbaren Mehrwert sorgen, überzeugen zwei besonders mit cooler Technik: der optimierte, innovative EvoHeater und der EvoCooler, eine komplett neu entwickelte aktive Kühlung.

Mit einem klaren Fokus auf die Bedürfnisse des afrikanischen Marktes präsentiert sich das Oerlikon Manmade Fibers Segment vom 5. bis 8. März 2020 auf der Egy Stitch & Tex 2020 in Kairo. Auf dem Stand des Oerlikon Vertreters ATAG Export & Import in Halle 1, Standnummer B2 werden auch Experten von Oerlikon Barmag und Oerlikon Neumag as umfassende Produkt- und Serviceportfolio des Weltmarktführers für Chemiefasergarnanlagen erläutern.

Im Mittelpunkt stehen beim Messeauftritt des Oerlikon Segments Manmade Fibers zwei Kerntechnologien: Zum ersten Mal im afrikanischen Markt wird die neue Texturiermaschinengeneration eAFK Evo von Oerlikon Barmag vorgestellt. Sie verspricht eine höhere Geschwindigkeit und Produktivität bei konstant hoher Produktqualität, sowie einen geringeren Energieverbrauch und eine einfachere Bedienung als vergleichbare Marktlösungen. Unter den vielfältigen Features, die für spürbaren Mehrwert sorgen, überzeugen zwei besonders mit cooler Technik: der optimierte, innovative EvoHeater und der EvoCooler, eine komplett neu entwickelte aktive Kühlung.

Der zweite Technologieschwerpunkt bietet speziell dem ägyptischen Markt und den Märkten im mittleren Osten neue Chancen: Mit der BCF S8 Mono- und Tricolor Anlage von Oerlikon Neumag wird das Segment sein neues Flaggschiff im Bereich Teppichgarnproduktion vorstellen. Höchste Spinngeschwindigkeiten, bis zu 700 Einzelfilamente, feine Titer bis zu 2,5 dpf – die Leistungsdaten und technologischen Feinheiten der neuen Anlage machten bereits auf zahlreichen Messen und Roadshows im vergangenen Jahr großen Eindruck. Die Kernkomponente der Tricolor Lösung ist die neue, zum Patent angemeldete Color Pop Compacting Einheit (CPC-T) für eine noch flexiblere und gleichmäßigere Farbseparation. Individuell kontrollierbare Luftdrücke je Farbe sorgen in der CPC-T für eine Vorvertangelung, welche eine Akzentuierung der Farben zur Folge hat und dadurch über 200.000 verschiede Farbschattierungen möglich macht. War es bisher auch nur schwer möglich, stark farbseparierte oder akzentuierte BCF Garne aus Polyamid 6 herzustellen, ist dies zukünftig dank der CPC-T machbar. Durch das neue Design ist die CPC-T nun auch für Prozesse mit niedrigen Fadenspannungen geeignet.

Erweitertes Produktangebot für die Herstellung von Teppichgarnen
Das Wissen über alle relevanten Technologien in der Chemiefaserspinnerei ermöglicht es Oerlikon als einzigem Hersteller weltweit, sein Leistungsangebot für die Produktion von Teppichgarnen zu erweitern. Das Anlagenkonzept auf Basis eines POY- und Texturier-Prozesses ist für einen Teppich- und Heimtextil- Produktbereich ausgelegt, der besonders weiche und bauschige Polyesterfäden mit BCF-ähnlichen Eigenschaften fordert. Zielrichtung sind hierbei Garne mit einem Titer bis zu maximal 1300dtex und typischerweise über 1000 Filamente. Typische Produkte sind zum Beispiel ein 1300dtex f1152 oder 660dtex f1152 sowie 990dtex f768. Das Maschinenkonzept besteht aus dem bekannten WINGS HD POY Wickler sowie der eAFK Big-V Texturiermaschine.

 

Source:

 Oerlikon Manmade Fibers.

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

CAALOSS2020collection with Bemberg™lining CAALOSS2020 collection withBemberg™lining
CAALOSS2020 collection with Bemberg™lining
29.01.2020

Bemberg™ doubles its presence at Première Vision

Bemberg™ gears up for Première Vision - February 11th-13th, Paris, France; with a great deal of novelties and a key statement on sustainability: Let’s Make it Circular! That’s why the Japanese brand of regenerated cellulose fibers joins the fair with two booths, one in the yarn-focused sector – Hall 6 C52 6D53 – the other one in the Smart Creation area, the curated district showcasing cutting-edge sustainable innovation for the textile and fashion business. Hall3 S14.

“We simply could not miss out on the Smart Creation Area as sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources. The strategy beyond our double presence is to highlight our deep commitment to responsible innovation to a larger target of professionals.”

Bemberg™ gears up for Première Vision - February 11th-13th, Paris, France; with a great deal of novelties and a key statement on sustainability: Let’s Make it Circular! That’s why the Japanese brand of regenerated cellulose fibers joins the fair with two booths, one in the yarn-focused sector – Hall 6 C52 6D53 – the other one in the Smart Creation area, the curated district showcasing cutting-edge sustainable innovation for the textile and fashion business. Hall3 S14.

“We simply could not miss out on the Smart Creation Area as sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources. The strategy beyond our double presence is to highlight our deep commitment to responsible innovation to a larger target of professionals.”

Let’s take it circular! is the motto at the Smart Creation booth. The lifespan of Bemberg™’s regenerated cellulose fiber derived from cotton is fully circular: from the source to manufacturing. The whole sustainable closed-loop process is supported by the LCA study, signed by ICEA and validated by Paolo Masoni. Recyclability is granted by the Global Recycle Standard - GRS certification by the renown Textile Exchange. An influential guarantee that involves the whole production process and supply chain behind the company’s smart yarns. Bemberg™ yarns are entirely biodegradable and ecotoxicity-free – meaning that at the end of their life circle they break down into the environment leaving no trace in terms of toxic substances as attested by the Innovhub-SSI report.

On show at Première Vision some of the most recent collaborations with GRS-certified partners such as FIVEOL, SMI TESSUTI, TESSITURA UBOLDI, INFINITY, SIDONIOS, MATIAS & ARAUJO, TINTEX, IPEKER, EKOTEN, for fashion fabrics as well as PEZZETTI and BRUNELLO & G.CRESPI from lining partners.

The first Bemberg™ partner to present a commercial collection enriched by Velutine™ Evo is the Portuguese Matias & Araújo. With an innovative spirit, dynamism and a determined entrepreneurial spirit, the company is a leading knitwear producer for the textile industry.

In the Hall 6 Bemberg™ displays key commercial items developed by premium brands such as CAALO that is making its mark in the outerwear market with its Sustainably produced Functional-Luxury proposal. For SS20, CAALO utilized Bemberg™ lining because of the sustainability properties and it's unique colour.

CAALO looks to utilize as much eco-friendly and sustainable materials as possible without compromising on design or quality. This Bemberg™ lining was a perfect fit.

Source:

(c) GB Network

The Oerlikon Nonwoven electro-charging unit (c) Oerlikon Nonwoven
The Oerlikon Nonwoven electro-charging unit
23.01.2020

Oerlikon Nonwoven showcases convincing meltblown and spunbond technology

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

 

More information:
Oerlikon Nonwoven Filtxpo
Source:

Oerlikon Nonwoven

Wood-Based Alternative: Feminine Hygiene Fibres from Kelheim
Wood-Based Alternative: Feminine Hygiene Fibres from Kelheim
20.01.2020

Wood-Based Alternative: Feminine Hygiene Fibres from Kelheim

Kelheim’s premium tampon fibre Galaxy® has proven effective in sanitary pads: It can substitute up to 70% of the synthetics in ADL (Acquisition-Distribution-Layers) in feminine hygiene pads. The amount of feminine hygiene waste is enormous – and often the time it takes for these products to degrade is hundreds of years longer than the lifespan of the woman who used it, because the synthetic components are not bio-degradable. Changing consumer behavior drives the need for environmentally friendly yet safe alternatives.

The viscose hygiene fibres from Kelheim offer significant ecologic advantages: they are made from cellulose, which means they are based on renewable wood and they are fully biodegradable. These fibres are manufactured exclusively in Germany, in one of the most environmentally friendly plants worldwide.

Kelheim’s premium tampon fibre Galaxy® has proven effective in sanitary pads: It can substitute up to 70% of the synthetics in ADL (Acquisition-Distribution-Layers) in feminine hygiene pads. The amount of feminine hygiene waste is enormous – and often the time it takes for these products to degrade is hundreds of years longer than the lifespan of the woman who used it, because the synthetic components are not bio-degradable. Changing consumer behavior drives the need for environmentally friendly yet safe alternatives.

The viscose hygiene fibres from Kelheim offer significant ecologic advantages: they are made from cellulose, which means they are based on renewable wood and they are fully biodegradable. These fibres are manufactured exclusively in Germany, in one of the most environmentally friendly plants worldwide.

Galaxy® in sanitary pads offers not only a benefit for the environment. Due to its excellent wicking and absorption capacity it conducts liquids quickly and efficiently away from the body and leaves a pleasant feeling on the skin – in other words, it does exactly what the ADL layer is made for. In addition, Galaxy® helps to distribute the liquid evenly in the absorbent core enhancing so the overall performance of the pad.

“Plastic must disappear from these single-use products. The substitution of single synthetic components in sanitary pads is the first step”, says Dominik Mayer from the Bavarian fibre expert’s R&D team. “Down the road we want to offer a completely bio-based solution for sanitary pads and for various other hygiene applications.

More information:
Kelheim Fibres
Source:

Kelheim FIbers