From the Sector

Reset
25 results
Photo: Filidea Technical Yarns
27.06.2022

Filidea Technical Yarns: New products and markets under the banner of sustainable evolution

  • New yarns for the contract furnishing world, for industrial sewing threads and the challenge of biodegradable polyester

At the product level, big impulse has been given to the range of industrial sewing threads for various uses, with new references both in the polyester + polyester compositions as well as in cotton + polyester. The industrial threads, marketed as raw material, allow the company to consolidate its position on some strategic markets, such as in Germany.

As a result of the partnership with Trevira® for the spinning of the flame-retardant Trevira®CS fibre, Filidea Technical Yarns reinforces its offer of non-dyed performant yarns aimed at the world of contract furnishings. The sector of hospitality, of furnishings for public and work spaces, fairs and areas for social-cultural gatherings will find a comprehensive answer to its demands in the Trevira®CS-based yarns: with regard to fireproof standards, versatility, resistance to wear and tear, excellent colour rendering, and last but not least, the component of fibre sustainability, an essential value for the design of spaces for collective use.

  • New yarns for the contract furnishing world, for industrial sewing threads and the challenge of biodegradable polyester

At the product level, big impulse has been given to the range of industrial sewing threads for various uses, with new references both in the polyester + polyester compositions as well as in cotton + polyester. The industrial threads, marketed as raw material, allow the company to consolidate its position on some strategic markets, such as in Germany.

As a result of the partnership with Trevira® for the spinning of the flame-retardant Trevira®CS fibre, Filidea Technical Yarns reinforces its offer of non-dyed performant yarns aimed at the world of contract furnishings. The sector of hospitality, of furnishings for public and work spaces, fairs and areas for social-cultural gatherings will find a comprehensive answer to its demands in the Trevira®CS-based yarns: with regard to fireproof standards, versatility, resistance to wear and tear, excellent colour rendering, and last but not least, the component of fibre sustainability, an essential value for the design of spaces for collective use.

Continuing in the development of sustainable production across the sector, the company has undertaken two important initiatives with other actors in the textile supply chain. Filidea participates in Trick, the European blockchain project – part of the European Horizon 2020 programme – involving 29 partners from six different nations to reinforce the circular economy thanks to the development of a digital platform which is complete, traceable and available to operators in the textile sector.

MagnoLab, the network of enterprises in the textile supply chain, and of which Filidea is one of the founding members, gives the impulse to constant R&D activities. MagnoLab was established in 2022 in order to develop tangible solutions for the sector, to create values and to collaborate with regard to current and future demands.

MagnoLab brings together textile companies which are active at various stages of and with complementary roles in the supply chain, and which work in synergy and share objectives, resourcefulness and long-sightedness, with the aim of developing innovation in a structured way. MagnoLab is also open to welcome new partners.

Source:

Filidea Technical Yarns

PREMIUM GROUP & JOOR present their first Hybrid Trade Fair Platform (c) Premium Exhibitions GmbH
09.06.2022

PREMIUM GROUP & JOOR present hybrid Trade Fair Platform

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group unites its various show locations to one cosmos for SS23 at Messe Berlin. The PREMIUM and SEEK shows will be joined by two further components— The Ground is a D2C creative platform for brands and consumers to meet, connect, and collaborate through one-of-a-kind experiences, engaging content, and innovative products, while FASHIONTECH, features masterclasses and panel discussions from the fashion industry’s most brilliant minds. A calendar of content includes deep dives into strong, successful, and sustainable strategies. As part of the content offer, JOOR will facilitate a masterclass on ‘Digital Wholesale’ and a future-looking roundtable discussion with four leading fashion brands on the FASHIONTECH stage.

Throughout the duration of the show, in-person buyers and visitors will have the ability to shop via the Premium Group mobile app. By simply scanning a brand’s corresponding QR code, visitors will link to the brand’s custom profile on JOOR Passport and be able to shop collections directly on the platform. JOOR Passport will also extend the duration of the shows by up to three months, allowing brands to continue wholesale selling digitally outside the window of the physical show.

JOOR and Premium Group’s flexible hybrid format allows visitors and brands a seamless digital and physical introduction to each other and their collections, the opportunity to connect in an efficient, effective, and longer term way, and the convenience to shop the show 24 hours a day from anywhere in the world.

Brands participating include Drykorn, Closed, Bertoni of Denmark, Veja, Ecoalf, Wrangler and Absolut Cashmere.

Source:

Premium Exhibitions GmbH

21.04.2022

Tata Communications announces its results for the fourth quarter and the full financial year 22

Tata Communications, a global digital ecosystem enabler, announces its financial results for the quarter and full year ended 31st March 2022.

Consolidated financial highlights:

Tata Communications, a global digital ecosystem enabler, announces its financial results for the quarter and full year ended 31st March 2022.

Consolidated financial highlights:

  • Consolidated revenue for FY22 came in at INR 16,725 Crores (USD 2,244.9 Mn) and at INR 4,263 Crores (USD 567.0 Mn) for Q4 FY22
  • Most of the segments across Core Connectivity, Digital Platforms & Services, and Incubation services of Data business witnessed healthy growth:
    • Data business grew by 2.1% QoQ and 1.4% YoY
    • Within Digital Platforms, all segments except Collaboration witnessed double digit YoY growth and strong sequential growth
    • Core Connectivity witnessed a revenue growth of +0.5% QoQ and +1.4% YoY
    • Incubation portfolio grew by 49.1% QoQ and 67.6% YoY
  • Consolidated EBITDA stood at INR 4,227 Crores (USD 567.3 Mn); with margins in at 25.3%, expanding by 40 Bps YoY. For the quarter, margin came in at 24.5%
  • Consolidated PAT stood at INR 1,482 Crores (USD 198.9 Mn) as compared to a profit of INR 1,251 Crores (USD 168.4 Mn) in FY21, registering a growth of + 18.5% YoY
  • CAPEX for this year was INR 1,608 Crores (USD 216.9 Mn) as compared to INR 1,421 Crores (USD 191.4 Mn) in FY21; Free Cash Flow for FY22 was at INR 2,619 Crores (USD 345.6 Mn)

The Board has recommended a dividend of INR 20.7 per share as a result of the Company reporting strong profitability.

Source:

Tata Communications / Harvard Engage! Communications

24.03.2022

C.L.A.S.S. ICON 2022: Applications open for third edition

On March 15th C.L.A.S.S. Eco Hub launched the 3rd edition of C.L.A.S.S. ICON Award, the annual competition with the aim of sponsoring and rewarding a visionary creative who is able to combine design, responsibility, innovation and communication.

The next selected winner of the international competition for visionary fashion creatives who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public, will be chosen in accordance to the principles of the C.L.A.S.S. Manifesto of Responsible Fashion (https://www.classecohub.org/wp-content/uploads/2022/03/Copia-di-C.L.A.S.S.-ICON-MANIFESTO-2.pdf).

The prestigious reward for the game changers of fashion counts C.L.A.S.S. support at 360° degrees, from material consultancy to communication support and a partnership-like engagement in C.L.A.S.S. activities both on and off-line. This specifically includes:

On March 15th C.L.A.S.S. Eco Hub launched the 3rd edition of C.L.A.S.S. ICON Award, the annual competition with the aim of sponsoring and rewarding a visionary creative who is able to combine design, responsibility, innovation and communication.

The next selected winner of the international competition for visionary fashion creatives who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public, will be chosen in accordance to the principles of the C.L.A.S.S. Manifesto of Responsible Fashion (https://www.classecohub.org/wp-content/uploads/2022/03/Copia-di-C.L.A.S.S.-ICON-MANIFESTO-2.pdf).

The prestigious reward for the game changers of fashion counts C.L.A.S.S. support at 360° degrees, from material consultancy to communication support and a partnership-like engagement in C.L.A.S.S. activities both on and off-line. This specifically includes:

  • 2 coupons valued 1000 € each to source responsibly on THE SMART SHOP, the inspirational materials’ bank and samples' e-shop, that includes a premium selection of the C.L.A.S.S. Material Hub’s materials
  • A consultancy session with C.L.A.S.S. TEAM: the ICON will have the chance to choose between an introduction to responsible innovation workshop or a specific session focusing on brand’s needs, for example responsible sourcing, certifications, communication.
  • Full communication support in terms of press releases, social media and events organisation

C.L.A.S.S. is also happy to announce that its partners will offer an exclusively customed package of marketing and communication activities:

  • Renoon is the app devoted to Responsible Shopping agglomerating thousands of ways to combine style and sustainability values may it be new, pre-loved and rental clothing. The package dedicated to C.L.A.S.S. ICON includes: a dedicated brand page on Renoon, the possibility to check and edit the description of the brand with Renoon's team and a featured article/interview on the new Renoon Library.
  • IDEE BRAND PLATFORM is a company based in Milan, which provides dedicated support in all commercial activity for design and fashion brands through the various stages of their growth steps. The package dedicated to C.L.A.S.S. ICON includes the support of the brand in commercial activities for SS23 and AW23/24.
  • SUSTAINABLE BRAND PLATFORM is a digital platform to measure, improve and communicate fashion brands sustainability making it simple and affordable. Through the creation of a real DIGITAL TOOLBOX SBP wants to give fashion brands all the instruments they need to obtain a global assessment of their sustainable performance. The package dedicated to C.L.A.S.S. ICON includes the Ecoscoring for brand’s sustainability and the creation of its Sustainable ID Card on Sustainable Brand Platform, as well as the use of the SBP logo, communication on social media and an interview in SBP/Magazine.
  • WHITE has always been attentive to the themes of responsible fashion and alongside the new generations of designers. That’s why they decided to support the international sustainability platform C.L.A.S.S. (Creativity, Lifestyle And Sustainable Synergy) with the annual award C.L.A.S.S. ICON, which promotes awareness in new sustainability values. For this reason, WHITE offers to the winner of C.L.A.S.S. ICON: a digital space on its WSM-WHITE platform and a physical space at the next show scheduled for September.

Applications are open until 1st May.
Email to classicon@classecohub.org, with a list of information such as brand vision and objectives, sustainability values and strategy, designer profile, a photo/video story of your latest collection, and any previous award (https://www.classecohub.org/c-l-a-s-s-icon).

(c) SHIMA SEIKI MFG., LTD
25.01.2022

SHIMA SEIKI to exhibit at Pitti Filati with flat knitting machine

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

The N.SVR®123SP computerized knitting machine features a special loop presser bed, capable of producing hybrid inlay fabrics with both knit and weave characteristics. Demand for such novel fabrics are very high across a wide range of applications, from fashion apparel to sportswear, innerwear, outerwear, uniforms and other functional clothing, as well as home furnishing and technical textiles. Shown in 18G at the SHIMA SEIKI booth, N.SVR®123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible. An SVR®123SP machine in 14G with i-Plating option will also be on display at the booth of yarn spinner IAFIL S.p.A. as well.

APEXFiz™ is subscription-based design software that maintains the proven functions that have made SHIMA SEIKI’s SDS®-ONE APEX series design systems so popular with fashion designers. Installed on personal computers, those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

APEXFiz™ along with SHIMA SEIKI’s yarnbank™ digital yarn web platform are featured at a special section launched at the previous session of Pitti Filati no. 89 called Pitti Studios. Pitti Studios is a content production service that yarn companies exhibiting at Pitti Filati can use for their own promotion. Yarn companies provide a piece of yarn, which is digitized on yarnbank™ and used to simulate photorealistic fabric on APEXFiz™. This is then processed by a creative studio specializing in digital content to provide static and animated 3D virtual representations. The process shows how to use the latest DX tools to provide accurate representation of a finished garment without having to produce any fabric, converting the conventionally wasteful process of sample-making into a sustainable one.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio.

Source:

SHIMA SEIKI MFG., LTD

24.01.2022

JEC World 2022 postponed

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

“We are fully dedicated to supporting the composites industry and to fostering its development via our events and media activities. Exhibitors and partners are strongly supporting JEC World, their leading event and want to meet in person in 2022 to activate business, share knowledge and highlight innovations. Postponing from March to May is a way to offer improved conditions to satisfy the industry requirements for such a trade fair as JEC World”, says Eric Pierrejean, CEO of JEC Group.

The JEC World team has decided to postpone the event after conducting a survey of its exhibitors and partners, confirming that a large majority is in favour of the new dates in May. As already planned, for three days, the event will offer for the first time a digital platform, JEC World Connect, in parallel to the in-person event in Paris for an augmented digital experience. Even after the show, via the JEC Web TV, unique content will be available to extend the reach of the event.

“Our main concern is to create the best possible conditions for our participants for successful networking, inspiration and business success. With a postponement of eight weeks we can enable this and offer to the industry the event it deserves. Taking the decision now, after consultation of all exhibitors, was necessary to give them planning and preparation visibility,” adds Thomas Lepretre, VP Events, Sales and Operations.

Source:

JEC Group

19.01.2022

Tata Communications announces its financial results for Q3 FY2022

Tata Communications, a global digital ecosystem enabler, today announces its financial results for the quarter and nine months ended 31st December 2021.

Highlights Q3 FY2022:

  • Sequential growth in Data business continues; revenues were at INR 3,233 crore, growing by +3.0% QoQ and +3.4% YoY. All 3 segments (Core Connectivity, Digital Platforms, & Incubation services) of Data business witnessed healthy growth
  • Digital Platforms and Solutions continue to improve and gain growth momentum, revenues grew by +5.2% QoQ and +6.7% YoY
  • Within Digital Platforms, all segments except Collaboration witnessed double digit YoY growth and strong sequential growth
  • Core Connectivity witnessed a revenue growth of +1.6% QoQ and +1.3% YoY
  • Consolidated revenue came in at INR 4,185 crore (USD 558.5 Mn); growth of +0.3% QoQ and a decline of -0.9% YoY. Consolidated EBITDA at INR 1,082.5 crore (USD 144.5 Mn); an increase of +3.5% YoY, with margins in at 25.9%, expanding by 110 BPs as compared to same quarter last year
  • Consolidated PAT stands at INR 395 crore (USD 52.8 Mn), growth of + 27.8% YoY

Tata Communications, a global digital ecosystem enabler, today announces its financial results for the quarter and nine months ended 31st December 2021.

Highlights Q3 FY2022:

  • Sequential growth in Data business continues; revenues were at INR 3,233 crore, growing by +3.0% QoQ and +3.4% YoY. All 3 segments (Core Connectivity, Digital Platforms, & Incubation services) of Data business witnessed healthy growth
  • Digital Platforms and Solutions continue to improve and gain growth momentum, revenues grew by +5.2% QoQ and +6.7% YoY
  • Within Digital Platforms, all segments except Collaboration witnessed double digit YoY growth and strong sequential growth
  • Core Connectivity witnessed a revenue growth of +1.6% QoQ and +1.3% YoY
  • Consolidated revenue came in at INR 4,185 crore (USD 558.5 Mn); growth of +0.3% QoQ and a decline of -0.9% YoY. Consolidated EBITDA at INR 1,082.5 crore (USD 144.5 Mn); an increase of +3.5% YoY, with margins in at 25.9%, expanding by 110 BPs as compared to same quarter last year
  • Consolidated PAT stands at INR 395 crore (USD 52.8 Mn), growth of + 27.8% YoY
Source:

Tata Communications / Harvard Engage! Communications

14.01.2022

Hohenstein joins Texbase Connect

Texbase, Inc., a cloud-based data management platform for the textile and consumer product industries, announces a collaboration with the global textile testing partner, Hohenstein.

As a Texbase Lab Connect partner, Hohenstein customers can collaborate, send test requests and receive test reports within Texbase Connect. In addition, data export files for digitized materials can be attached to their specific materials in the system. “Texbase has facilitated an improved workflow for our brand customers. Adding this system to our earlier OEKO-TEX® CertLink project gives our partners easy access to the data they need - in one location - instead of having to manage multiple emails," said Ben Mead, Managing Director, Hohenstein Institute America.

Hohenstein is a global leader in textile testing and innovation, specializing in applied research and development around the human - textile - environment interaction. Their lab testing determines compliance with legal requirements, standards, international specifications and internal quality guidelines. Hohenstein validates performance and safety claims through standard and customized testing and certifications.

Texbase, Inc., a cloud-based data management platform for the textile and consumer product industries, announces a collaboration with the global textile testing partner, Hohenstein.

As a Texbase Lab Connect partner, Hohenstein customers can collaborate, send test requests and receive test reports within Texbase Connect. In addition, data export files for digitized materials can be attached to their specific materials in the system. “Texbase has facilitated an improved workflow for our brand customers. Adding this system to our earlier OEKO-TEX® CertLink project gives our partners easy access to the data they need - in one location - instead of having to manage multiple emails," said Ben Mead, Managing Director, Hohenstein Institute America.

Hohenstein is a global leader in textile testing and innovation, specializing in applied research and development around the human - textile - environment interaction. Their lab testing determines compliance with legal requirements, standards, international specifications and internal quality guidelines. Hohenstein validates performance and safety claims through standard and customized testing and certifications.

Hohenstein and Texbase will both be exhibiting at the upcoming Outdoor Retailer/Snow Show on January 26-28th.

Source:

Hohenstein

06.01.2022

Messe Frankfurt cancels consumer goods fairs in January and February 2022

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

The four events, consisting of Christmasworld with its focus on seasonal and festive decorations, Paperworld and Creativeworld with their product ranges for paper, office supplies, stationery and hobby, craft and artists' requisites and Ambiente with its cross-sector range of products for the table, kitchen and housewares, furnishing and decorative accessories, home furnishing concepts, gifts and fashion accessories, are the recognised leading trade fairs in their sectors and open the trading year in their respective segments. Even in a reduced numerical form, the four trade fairs would still have been the leading events worldwide for their respective product segments.

However, the exponential increase in the number of infections worldwide in a very short period of time and the accompanying multitude of developments and decisions that are clearly outside the organiser's sphere of influence have led to a significant deterioration in the general conditions and necessary prerequisites for holding the four leading trade fairs as major events of international relevance at the end of January and in mid-February 2022 respectively. These developments include the classification of Germany as a high-risk area and the associated travel warnings and international and intercontinental travel restrictions in countries such as India, Japan and the United States, as well as the corresponding quarantine obligations. Equally important are the steadily rising infection figures and the accompanying urgent appeal, among others by the Robert Koch Institute and the expert council of the German Federal Government, to continue to reduce contacts to a minimum and to cancel all major events. At present, there are even further international fears that the critical infrastructure will not be maintained due to the highly contagious Omicron variant. The majority of exhibiting and visiting companies at Christmasworld, Paperworld, and Creativeworld as well as Ambiente are currently reacting to this overall situation with travel and trade fair attendance bans for reasons of duty of care towards their employees to protect them from health risks. The global willingness to travel is dropping enormously at the moment.

There are no plans to postpone the event. Detlef Braun, Member of the Executive Board of Messe Frankfurt, explains: "Since the trend-oriented order cycles of the international consumer goods industry require an annual event at the beginning of the year, a shift to the second half of the year would not meet the needs of the exhibiting companies and visitors."

Nordstil to be held in Hamburg from 15 to 17 January 2022
In the interests of the sectors involved, the planning and implementation of Nordstil from 15 to 17 January 2022 is not affected. This trade fair will take place in the Free and Hanseatic City of Hamburg at this time due to other general conditions for local implementation. However, the extremely volatile situation is continuously reviewed and assessed in close exchange with the relevant local authorities and industry partners.

Messe Frankfurt's digital platforms for business success
Messe Frankfurt has already been actively helping retailers to help themselves since 2019 with Nextrade, the first order and data management platform for the home and living sector, and Conzoom Solutions, an information platform for the global consumer goods sector. "A second year without appropriate ordering, inspiration and networking formats poses considerable and in some cases existentially threatening challenges for retailers worldwide," Braun explains. "With our digital offers, we are specifically supporting our partners in industry and trade in this volatile situation. In addition, we will continue to put all our energy and optimism into safe and promising trade fairs. Because there is no substitute for meeting in real life."

Information on the planning of the Frankfurt consumer goods fairs for 2023 will be announced at the beginning of February 2022.

Source:

Messe Frankfurt Exhibition GmbH

JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking © 2021 JEC Group
JEC World 2022
08.12.2021

JEC World 2022: 3 months to go

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

“We are looking forward to welcoming our exhibitors, partners and visitors back to Paris to resume business and promote innovation,” comments Thomas Lepretre, VP Events, Sales and Operations of JEC Group. “JEC World will bring the composites industry together to showcase the sustainability benefits of composite materials to a global audience, and to provide a stimulating meeting-place for the industry to pursue its sustainability ambitions by exchanging knowledge, forging collaborations, and imagining new concepts to protect our environment.”

  • JEC World a unique get-together on sustainability throughout the product lifecycle
  • JEC World a real composites “think tank”
  • JEC World 2022 will demonstrate how sustainable thinking is at the heart of the innovative designs, technologies and business models driving the development of the next generation of composites applications.

Four conferences will be held over the three days, focusing on:

• Sustainability of Raw Materials for Composites: Fueling the Circular Revolution
• Rethinking Composite Materials Production: The Path to Sustainable Manufacturing
• Design for Circular Composite Products: Turning Waste, Recycling & Reuse into Opportunities
• Applications of Composite Materials for Circularity: Towards a Net-Zero World

Innovation is in JEC World’s DNA
One of JEC World’s objective’s is to promote the composites sector’s most innovative projects. More than 600 product launches are expected to be announced over the three days of the show, which will also feature JEC’s high-regarded innovation challenges and awards ceremonies :

• The JEC Composites Innovation Awards celebrate innovative global composite projects, as well as fruitful collaborations between different players in the value chain. Over more than 15 years, the JEC Composites Innovation Awards have highlighted collaborations between some 1,900 companies and recognized 203 creative projects. The winners will be announced on March 7th during a dedicated ceremony and their successful technologies will be on display throughout the show.

• The JEC Composites Startup Booster is the leading startup competition in the world of composites. In 2022, this competition will celebrate its fifth anniversary, with a special event to be organized onsite and the launch of a new “sustainability” award. And, with 20 finalists for 2022, it will recognize innovations with the greatest potential market impact and promote them to an influential audience of decision-makers. The finalists’ innovations will be displayed at JEC World’s “Startup Village.”

• For the first time, JEC World will host the 3rd edition of the SMC BMC Design Award organized by the European Alliance for SMC BMC. This international competition recognizes and promotes design excellence in the use of SMC and BMC materials. The theme of this edition is Sustainable Living, and the award is opento design students and young design professionals (less than 3 years of experience) living in Europe.

Source:

JEC Group

24.11.2021

PERFORMANCE DAYS cancelled in Munich on December 1-2, 2021

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

The new measures are scheduled to come into effect in Munich from the middle of this week, which would lead to very short-term changes. The organizers of PERFORMANCE DAYS therefore see themselves in the responsibility to enable a minimum of planning security as well as a responsible handling of the given situation with this decision.

“Exceptional situations require exceptional decisions – making these all the more difficult. After experiencing a very successful and surprisingly well-attended fair with the Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon last week, we have tried everything possible up to the last moment and firmly believed that we would finally set a further positive milestone with the physical edition of PERFORMANCE DAYS in Munich. We fulfilled all the requirements, updated our hygiene concept several times to comply with the dynamically changing measures and took all the necessary precautions for a safe event. Unfortunately, current developments do not allow us to host the trade fair event next week, since the undisputed top priority is the protection and health of our visitors. Now our focus turns to the full implementation of the Digital Fair on December 1 and 2, 2021”, explains Marco Weichert, CEO of PERFORMANCE DAYS

Focus on digital platform
The PERFORMANCE DAYS team is now investing all its efforts into implementing the Digital Fair on December 1 and 2, 2021. As part of THE LOOP, those interested have the opportunity as of now to view online the fabric innovations and news for the Winter Season 2023/24, this year’s Focus Topic “Sustainable Nylon” and the latest color trends. In the Marketplace, visitors will be able to view the numerous exhibitor products, including the PERFORMANCE FORUM’s curated sustainable fabric highlights. In order to present the fabrics to visitors as realistically as possible in terms of feel, design and structure in digital form, the PERFORMANCE FORUM has been equipped with new 3D-technology, including innovative tools such as 3D images, video animations and downloadable U3M files. Throughout the Digital Fair, exhibitors and fair visitors can look forward to extensive networking opportunities. For example, as part of the extensive digital supporting program on December 1, with various expert talks, discussion rounds and speakers via livestream, moderated by Charles Ross live from the studio. On December 2, the “sustain & innovate” conference on this year’s Focus Topic “The Sustainable Future of Nylon” will kick off with discussions and panels, moderated by Astrid Schlüchter, Editor-in-Chief of SAZsport and SPORTSFASHION by saz.  

A very special thank you goes out to the entire PERFORMANCE DAYS community with its exhibitors, visitors and partners for their active support, trust, loyalty and understanding in these still extraordinary times. The team looks forward to the Digital Fair on December 1 and 2, 2021 and further ahead to meeting you all personally on April 27 and 28, 2022 at the summer edition of PERFORMANCE DAYS live in Munich.

Source:

Performance Days

(c) Picanol. Connect generation - PicConnect enabled (BlueTouch display).
Connect generation - PicConnect enabled (BlueTouch display)
08.11.2021

Picanol: New Connect generation of airjet and rapier weaving machines

Picanol has introduced its latest generation of airjet and rapier weaving machines, which have been called the “Connect” generation. These new generation weaving machines focus on connectivity and an increased level of data availability. With this new generation, Picanol is launching several new functionalities such as a digitalized Gripper stroke setting, Gripper tape monitoring, Climate control, Shed angle measurement, and fully integrated Power monitoring.

Picanol has introduced its latest generation of airjet and rapier weaving machines, which have been called the “Connect” generation. These new generation weaving machines focus on connectivity and an increased level of data availability. With this new generation, Picanol is launching several new functionalities such as a digitalized Gripper stroke setting, Gripper tape monitoring, Climate control, Shed angle measurement, and fully integrated Power monitoring.

“Following the successful launch of our digital platform PicConnect earlier this month, we have now released a new generation of weaving machines, which are known as the Connect generation. Our Connect generation weaving machines can provide the correct data and are loaded with new and never-before-seen functionalities. This is clear proof that for Picanol “Driven by Data” is not just a slogan but a commitment. Not only have these innovations allowed us to make big improvements when it comes to our four design principles – Smart Performance, Sustainability Inside, Intuitive Control, and, of course, Driven by Data – but when combined with our new digital platform they will allow you to amplify your own intuition.” comments Johan Verstraete, Vice President Weaving Machines.

From now on, the range of Picanol weaving machines will have the “Connect” suffix. For the airjet weaving machines, this means: OmniPlus-i Connect and TerryPlus-i Connect, while for the rapier weaving machines, this means: OptiMax-i Connect and TerryMax-i Connect. These new machines are built around Picanol’s four main design principles:

Smart Performance
On the OptiMax-i Connect, Picanol has introduced a lubrication monitoring sensor in combination with a temperature sensor. The combined data they provide allow the user to make sure the gripper tapes are in optimal condition for maximum performance. As an option, a gripper stroke measurement sensor is also available. This not only dramatically simplifies the setting of the gripper stroke, but also enables the user to realize higher machine speeds when weaving reduced widths – a pure extra output combined with more user-friendliness.

Sustainability Inside
Even though it was 25 years ago that the Sumo Drive concept was launched, it remains the most powerful, versatile and energy friendly machine drive available. And it has been even further optimized. It features an optimized sheet metal package for lower energy consumption, optimized oil cooling circuit for a better performance and a built-in temperature monitoring. Moreover, the Connect machines can be equipped with a Power monitoring module, which allows the user to keep track of the power consumption of each machine over time. Every Connect machine also has a built-in ambient temperature and humidity sensor, which will help to optimize the climate control in the weaving shed at the lowest cost. And as raw material is the biggest cost factor, each machine can also be equipped with raw material use monitoring.

Driven by Data
As the machine has more sensors than ever before, it also generates more data. To enable a fast reaction to all these sensor data, the BlueBox control unit has been further optimized: better heat management guarantees short reaction cycles combined with the long lifetime of components. To have a good view of all of the data generated, a special sensor dashboard screen is available in the BlueTouch display: with a simple touch of the screen, the current and historical power consumption, temperature, humidity, material consumption, and – on the OmniPlus-i Connect – also the air consumption, can be monitored. The BlueTouch display is now also equipped with an Action center, an electronic logbook where all actions such as maintenance interventions can be logged or scheduled beforehand. The machine manual is now available on the BlueTouch display, and with the context-based help function the help pages related to the operation the user wants to perform appear with one touch of his/her fingertip. The built-in web browser even allows the user even to consult, for example, tutorial videos on the web to guide them through a setting procedure.

Intuitive Control
The Connect generation was designed to focus on what really matters: weave the highest possible grade A fabrics at minimal costs. A large set of tools have been installed to facilitate this goal. One of the most remarkable ones is the Harness frame stroke measurement – until recently, it was only available on the revolutionary SmartShed, but it is now also available on the cambox and dobby machines. Combined with the shed visualization and simulation, it offers a quantum leap in terms of optimizing the user’s shed settings without losing any time or taking any risks. The colors of the programmable Smart signal lights with stop timing functionality are now repeated around the push buttons, allowing even better visibility and the prioritization of interventions by the weaver. A full-fledged Access control system not only limits the access to certain pages and settings depending on the user, but also allows a tailored dashboard to be established for each user profile.

Source:

Picanol

14.10.2021

Fashion 4 Development and C.L.A.S.S. Eco Hub launch "The ReClothe’s Platform"

Fashion 4 Development and C.L.A.S.S. Eco Hub are pleased to announce the launch of their digital platform called “The Reclothe’s Platform”. The digital platform, which is a joint venture between the two companies, is expected to add significant value to all the stakeholders in the fashion and lifestyle industry. The core objective of the Reclothe’s Platform is to be a one-stop source of information and guide for professionals and students in the fashion and lifestyle industry.

Fashion 4 Development and C.L.A.S.S. Eco Hub are pleased to announce the launch of their digital platform called “The Reclothe’s Platform”. The digital platform, which is a joint venture between the two companies, is expected to add significant value to all the stakeholders in the fashion and lifestyle industry. The core objective of the Reclothe’s Platform is to be a one-stop source of information and guide for professionals and students in the fashion and lifestyle industry.

The ReClothe platform will feature current innovators highlighting the practices & solutions for textile and manufacturers, pushing the industry towards a greener and more sustainable standard. The platform will lead members into scalable and more responsible manufacturing processes, driving responsible innovation practices across all aspects of the supply chain, measured and proved.
 
The joint venture was created in 2021 by Fashion 4 Development and C.L.A.S.S. Eco Hub to support the United Nations Office of Partnerships for the Sustainable Development Goals. Both Fashion 4 Development and C.L.A.S.S. Eco Hub are recognized for their experiences working from broad perspectives to advance the sustainability transformation

Picanol introduces online plattform for weaving (c) Picanol
08.10.2021

Picanol introduces online platform for weaving

With PicConnect, a new fully digital platform, Picanol is offering a wide range of features, from industrial IoT to service-related applications. PicConnect is a web-based application that can be accessed through a web browser on any device and it functions as the gateway to all Picanol’s digital services. The platform is cloud-based and it allows connecting the Picanol weaving machines to the platform in order to leverage its full extent of possibilities.

“PicConnect enables weavers to quickly react to changes in the weaving room, and it will have an immediate impact on the performance of the weaving machines. It will not only change how weavers interact with their machines but also the way they interact with Picanol. For this reason, Picanol can boldly state that PicConnect is bringing weavers into the era of intuitive weaving,” comments Johan Verstraete, Vice President Weaving Machines.

The first four applications that will be launched as part of PicConnect are: production monitoring, energy monitoring, style administration, and PartsLine, which is Picanol’s new online webshop.

With PicConnect, a new fully digital platform, Picanol is offering a wide range of features, from industrial IoT to service-related applications. PicConnect is a web-based application that can be accessed through a web browser on any device and it functions as the gateway to all Picanol’s digital services. The platform is cloud-based and it allows connecting the Picanol weaving machines to the platform in order to leverage its full extent of possibilities.

“PicConnect enables weavers to quickly react to changes in the weaving room, and it will have an immediate impact on the performance of the weaving machines. It will not only change how weavers interact with their machines but also the way they interact with Picanol. For this reason, Picanol can boldly state that PicConnect is bringing weavers into the era of intuitive weaving,” comments Johan Verstraete, Vice President Weaving Machines.

The first four applications that will be launched as part of PicConnect are: production monitoring, energy monitoring, style administration, and PartsLine, which is Picanol’s new online webshop.

Source:

Picanol

(c) JANDALI MODE.MEDIEN.MESSEN für CHIC
10.08.2021

CHIC Shanghai in October instead of August 2021

Instead of taking place from August 25-27 as originally planned, Asia's leading trade fair for fashion and lifestyle will now be held from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai. The fair has been taking place physically again since July 2020, always in compliance with strict safety and hygiene regulations. Various digital platforms are being set up in parallel.

The around 500 brands registered for CHIC (August) will now present themselves to the trade visitors in autumn on 62,000 sqm, including important industry players such as JINTIANSHI (menswear), VINI Bespoke (menswear), Zaijiu (womenswear), Jiebeidi (womenswear), COFNA (childrenswear), Laura Vita (shoes), Hattershub (headwear), MANNYLONQ (CHIC-Young Blood) and Dragon Heart (CHIC-Young Blood) and exciting up-and-coming designers such as KIMUSSO, Yujiantian and Wuma.

Instead of taking place from August 25-27 as originally planned, Asia's leading trade fair for fashion and lifestyle will now be held from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai. The fair has been taking place physically again since July 2020, always in compliance with strict safety and hygiene regulations. Various digital platforms are being set up in parallel.

The around 500 brands registered for CHIC (August) will now present themselves to the trade visitors in autumn on 62,000 sqm, including important industry players such as JINTIANSHI (menswear), VINI Bespoke (menswear), Zaijiu (womenswear), Jiebeidi (womenswear), COFNA (childrenswear), Laura Vita (shoes), Hattershub (headwear), MANNYLONQ (CHIC-Young Blood) and Dragon Heart (CHIC-Young Blood) and exciting up-and-coming designers such as KIMUSSO, Yujiantian and Wuma.

The expected 60,000 visitors are also able to attend seminars and workshops on current topics such as Recognition and new opportunities of new retail in AI Fashion or 2021 Maker of Silk Road & Innovation of Design Infinity -- The Innovation and Entrepreneurship Competition of China Textile & Apparel SME.

Next events:
CHIC Shenzhen | 3rd-5th November 2021 | Shenzhen
CHIC March 22 | 9-11 March 2022 | Shanghai

Source:

JANDALI MODE.MEDIEN.MESSEN

22.04.2021

Lenzing Group: Sustainability Report 2020

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes.

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes. The non-financial report, prepared in accordance with the reporting standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and reviewed by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft, illustrates how the company is responding to the global challenges of our time.

The 2020 financial year of the Lenzing Group was largely dominated by the COVID-19 pandemic. Lenzing took short-term measures to safeguard its business operations and mitigate the effects of fiber prices and fiber demand which came under increasing pressure. The priority was to protect employees and strengthen long-term partnerships with suppliers and customers. Following the current fight against the coronavirus and its consequences, the company continues to move ahead determinedly to achieve its sustainability targets, also against the backdrop of such a difficult market environment.

With the implementation of its science-based targets, the Lenzing Group actively contributes to mastering the problems caused by climate change. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions by 50 percent per ton of product by 2030. The overriding target is to be climate-neutral by 2050.*

The launch of the first carbon-zero TENCEL™ fibers certified as CarbonNeutral® products in accordance with The CarbonNeutral Protocol – the leading global framework for carbon neutrality – represents another important milestone from the reporting year. As of June 2021, Lenzing will also market the first VEOCEL™ branded lyocell fibers as certified CarbonNeutral® products.

Promoting the circular economy
Lenzing also sets standards for the entire fiber, textile and clothing industry with respect to the circular economy which is of such crucial importance in climate and resource protection. In order to enhance resource efficiency and offer a solution for the global problem of textile waste, the company developed the REFIBRA™ recycling technology. REFIBRA™ is the only technology in the world enabling the production of new lyocell fibers on a commercial scale from cotton scraps derived from manufacturing cotton clothing as well as from used garments. In this way, an important contribution is made to promoting circularity in the textile industry.*

New level of transparency in the textile industry
In addition to environmental protection, the issue of transparency along the supply chain poses a major challenge to the textile industry. Working in cooperation with TextileGenesis™, Lenzing offers an innovative solution to ensure greater transparency on the basis of blockchain technology. Following several successful pilot projects with renowned fashion brands, this digital platform was ultimately launched in 2020 to enable the traceability of textiles, from the fiber to all stages of production and distribution. Thanks to the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and its partners are able to issue so-called “blockchain assets” in direct proportion to the physical fiber deliveries of the brands TENCEL™ and LENZING™ ECOVERO™. These digital assets function like a “fingerprint” and thus prevent adulteration.*

Target setting: Lenzing raises the bar even higher
The Lenzing Group operates in line with three strategic principles within the context of its “Naturally positive” sustainability strategy: partnering for change, advancing circularity and greening the value chain.*

 

*See attached document for more information..

03.03.2021

CHIC Shanghai takes place on March 17 to 19, 2021

  • CHIC Shanghai, March 17 to 19, 2021 (due to new regulation to control the infection rate)
  • 905 exhibitors are present at CHIC
  • Parallel: CHIC ONLINE as a digital platform with upgrade of the CHIC
  • APP
  • CHIC GARDEN: puts fashion and sustainability in the limelight

The CHIC spring event takes place from March 17th to 19th under strict hygiene guidelines in the National Exhibition & Convention Center in Shanghai parallel to Intertextile Shanghai, Yarn Expo and PH Value.

The Chinese economy has recovered again after the pandemic in China and already reached pre-crisis level with 6.5% growth in the fourth quarter of 2020. McKinsey estimates are a 5 to 10% growth in sales in China in 2021 compared to 2019. Thanks to good sales in China, the fashion luxury brands in particular have been able to improve their sales figures. But also regarding online trade, Chinese ecommerce sales were in first place worldwide for the eighth year in a row. The average per capita income of consumers rose by 3.8% last year.

  • CHIC Shanghai, March 17 to 19, 2021 (due to new regulation to control the infection rate)
  • 905 exhibitors are present at CHIC
  • Parallel: CHIC ONLINE as a digital platform with upgrade of the CHIC
  • APP
  • CHIC GARDEN: puts fashion and sustainability in the limelight

The CHIC spring event takes place from March 17th to 19th under strict hygiene guidelines in the National Exhibition & Convention Center in Shanghai parallel to Intertextile Shanghai, Yarn Expo and PH Value.

The Chinese economy has recovered again after the pandemic in China and already reached pre-crisis level with 6.5% growth in the fourth quarter of 2020. McKinsey estimates are a 5 to 10% growth in sales in China in 2021 compared to 2019. Thanks to good sales in China, the fashion luxury brands in particular have been able to improve their sales figures. But also regarding online trade, Chinese ecommerce sales were in first place worldwide for the eighth year in a row. The average per capita income of consumers rose by 3.8% last year.

905 exhibitors and 932 brands will present themselves on site at CHIC. Around 95,000 trade visitors from all retail areas, including all relevant online sales platforms, are expected. The CHIC's online and live streaming events, which run parallel to the trade fairs, have recorded an average of 150,000 clicks on each show since April last year.

CHIC Garden
China is to become climate neutral by 2060, which of course also affects the fashion sector. Overall, the awareness of Chinese consumers has developed even more towards high-quality, sustainable collections. In their "State of Fashion 2021" report, McKinsey & BoF analyze the awareness development in China that consumers and producers are increasingly recognizing the importance of joint efforts by all participants in the value chain to work together in order to achieve sustainability in the fashion industry.

The CHIC flagship event visualizes this topic with the "CHIC Garden" theme. With the help of garden design experts, the fair is transformed into an inspiring garden paradise that reflects closeness to nature and the appreciation of natural resources.

As an exception, the CHIC autumn event, CHIC Shanghai will take place in August this year (25th to 27th August 2021).

Source:

JANDALI

03.03.2021

JEC WORLD 2021 postponed

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

“The coronavirus pandemic situation has taken the central stage, so in light of the current situation, it would not be possible for us to satisfy our customers’ requirements for such an international trade fair as JEC World in June. We truly regret having to make this difficult decision once again. However, we are all committed, starting today, to deliver the best JEC World experience to our clients in 2022.” says Eric Pierrejean, CEO of JEC Group. “While waiting for welcoming the international composites community back to Paris in March 2022, JEC Group team is preparing various online Rendez-Vous in June enabling the entire composites community to discover trends and innovations, and to connect″, he added.

The leading composites event will take place from March 8 to 10, 2022, at Paris Nord Villepinte (same venue) and online for a new augmented experience.

As the leading trade show of the composites industry, JEC World will bring together the whole composites materials value chain and professionals from application sectors, experts from the scientific and academic world, associations, and media from more than 112 countries, introducing in 2022 its audience its new digital platform, JEC World Augmented.

“JEC World 2022 and the augmented platform  will bring the international composites community and specialists together to resume business, network, hold business meetings. They will also have the chance to participate in conferences, workshops, and discover the latest composites innovations,” says Adeline Larroque, Show director and EMEA events.

Source:

JEC Group

Lenzing introduces blockchainenabled traceability platform (c) Lenzing
06.11.2020

Lenzing introduces blockchainenabled traceability platform

  • New level of transparency in the textile industry
  • Building on several successful pilot projects with TextileGenesis™, the digital platform for the traceability across the textile supply chain has now been introduced.

The Lenzing Group, a leading company in the area of wood-based specialty fibers, celebrates another milestone on the way to making the textile and apparel industry more sustainable and transparent. Since 2019, Lenzing has been using the blockchain technology powered by the Hong Kong start-up TextileGenesis™ to ensure the traceability of textiles from fiber to production and distribution. After several successful pilot projects, the digital platform was launched on 5 November for TENCEL™ and LENZING™ ECOVERO™ branded fibers. The platform provides customers and partners as well as consumers with an overview across the entire textile supply chain.

  • New level of transparency in the textile industry
  • Building on several successful pilot projects with TextileGenesis™, the digital platform for the traceability across the textile supply chain has now been introduced.

The Lenzing Group, a leading company in the area of wood-based specialty fibers, celebrates another milestone on the way to making the textile and apparel industry more sustainable and transparent. Since 2019, Lenzing has been using the blockchain technology powered by the Hong Kong start-up TextileGenesis™ to ensure the traceability of textiles from fiber to production and distribution. After several successful pilot projects, the digital platform was launched on 5 November for TENCEL™ and LENZING™ ECOVERO™ branded fibers. The platform provides customers and partners as well as consumers with an overview across the entire textile supply chain.

With the COVID-19 pandemic, more changes have been brought to the already transforming fashion and textile industries. To date, supply chain traceability has become a top priority for apparel and home brands. With the blockchain-enabled supply chain traceability platform powered by TextileGenesis™, Lenzing supports the entire supply chain in meeting the increasing demand for transparency and sustainability.

Phased onboarding and new digital certificates

A follow-up of a 12-month pilot program and field trials with four leading sustainable brands (H&M, ArmedAngels, Mara Hoffman and Chicks) and supply chain players from 10 countries in three regions, the global roll-out of Lenzing’s blockchain-enabled supply chain traceability platform will be conducted in phases. During the first phase, Lenzing’s supply chain partners based in South Asia (India, Bangladesh, Pakistan and Sri Lanka) will complete the onboarding process within Q4 2020. An estimated 300+ supply chain partners in China and Turkey will also join the program in Q1 2021. It is estimated that by Q2 2021,  most eligible Lenzing supply chain partners will be onboarded into the platform, ensuring full supply chain traceability.

One of the core components of the platform powered by TextileGenesis™ is integration with the Lenzing EBranding fabric certification system, which allows brands and retailers not only to access the full supply chain traceability for TENCELTM and LENZINGTM ECOVEROTM branded fibers but also to view the results of forensic (physical) verification of fabric samples via the digitally signed Lenzing E-Branding fabric certificates. “

Over the past year, during the pilot program and field trials we have been receiving very positive feedback from brands and supply chain partners. Our brand partners have also been encouraging us to accelerate the global roll-out for traceability of Lenzing fibers. With this new system and the integration with Lenzing E-Branding fabric certificates, the entire Lenzing ecosystem will create an unprecedented level of transparency. This will provide consumers with the most sustainable and climate-friendly clothing and home textile products that are made of TENCEL™ or LENZING™ ECOVERO™ branded fibers”, says Robert van de Kerkhof, Chief Commercial Officer and Member of the Board at Lenzing.

“With increasing compliance and reputational risks, CEOs and Boards of top 100 fashion brands have committed to using 100% sustainable and traceable fibers over the next 5 years, with transparency being a core part of business priorities. Sustainability and traceability are two sides of the same coin, and it’s great to see Lenzing paving the way for the entire fashion industry to follow. Our supply chain traceability platform will create digital accounting for Lenzing’s innovative and sustainable fibers across the entire supply chain using Fibercoins™ traceability technology”, says Amit Gautam, Chief Executive Officer and Founder of TextileGenesis™.

Fibercoin™ technology to ensure traceability across supply chain

Through using the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and other brand
partners are now able to issue digital tokens (blockchain assets) in direct proportion to the physical shipments of TENCEL™ and LENZING™ ECOVERO™ branded fibers. These digital tokens provide a unique “fingerprint” and authentication mechanism, preventing adulteration, providing a more secure, trustworthy, digital chain-of custody across the entire textile supply chain, and most importantly, ensuring the materials are sustainably produced.

03.11.2020

JEC WORLD announces new 2021 Dates

  • New digital platform unveiled
  • Due to the continued impact of the Covid-19 pandemic and after thorough consultation of clients and partners, the JEC World team today announces that the next edition of JEC World is postponed from March 9 to 11 to June 1 to 3, 2021.

With the growing concern among our exhibitors and partners surrounding the critical situation of the Covid  19,  travel  restrictions,  quarantine,  and  lockdown  measures  announced  recently  in  many  countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in safer conditions in 2021.

  • New digital platform unveiled
  • Due to the continued impact of the Covid-19 pandemic and after thorough consultation of clients and partners, the JEC World team today announces that the next edition of JEC World is postponed from March 9 to 11 to June 1 to 3, 2021.

With the growing concern among our exhibitors and partners surrounding the critical situation of the Covid  19,  travel  restrictions,  quarantine,  and  lockdown  measures  announced  recently  in  many  countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in safer conditions in 2021.

Thus, JEC World exhibitors answered a survey proposing three dates to determine which one would suit  them  the  most.  It  appeared  that  a  large  majority  of  respondents  favored  holding  the  next  JEC  World session from June 1 to 3, 2021."We truly regret having to make this difficult decision. However, we are all committed, starting todayto deliver the best JEC World experience to our clients.  We look forward to welcoming the international composites community back to Paris in June 2021", says Eric Pierrejean, CEO of JEC Group. As the leading trade show of the composites industry, JEC World brings together the whole composites materials  value  chain  and  professionals  from  application  sectors,  experts  from  the  scientific  and  academic world, associations and media from more than 112 countries.

JEC  World  is  also  proud  to  introduce  its  audience  this  year,  its  new  digital  platform,  JEC  World  Augmented.

This online platform, programmed to take place alongside JEC World,istailored primarily for attendees who cannot be present physically at the show but still want to experience a tremendousdigital event immersion. "JEC  World  and  its  augmented platform  will  bring  the  international  composites  community  and  specialists   together   to   network   with   exhibitors,   hold   digital   business   meetings,   access   online   conferences, workshops, and discover the latest composites innovation,"  says Adeline Larroque, Show director and EMEA events. "Now, more than ever, the international composites sector needs to come together to discuss today's challenges and tomorrow's composites solutions," adds Larroque.

Source:

JEC Group