From the Sector

SSM Schärer Schweiter Mettler AG, a subsidiary of the Rieter Group, has appointed Per Olofsson as Managing Director and member of the SSM Group’s management team effective April 1, 2021.

Mr. Olofsson is a Swedish citizen and holds a Master of Science Degree in Supply Chain and Operations Management from the University of Liverpool, United Kingdom, and an Executive MBA from the International Institute for Management Development (IMD) in Lausanne, Switzerland.

Per Oloffson joined the Rieter Group in 2013 and is an experienced operations manager with a proven management track record at both local and global level.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2020, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

Outlook Updated
As already communicated at the Results Press Conference on March 9, 2021, Rieter expects the market recovery to continue in 2021. The company expects an order intake exceeding CHF 500 million in the first half of 2021. For the first half of 2021, Rieter still anticipates that sales will be below break-even point. For the full year 2021, Rieter expects an operating profit.

The viscose speciality fibre manufacturer Kelheim Fibres has joined the ZDHC programme "Roadmap to Zero".

The non-profit organisation with more than 160 contributors worldwide has set itself the goal of completely eliminating harmful substances from the textile value chain. The ZDHC guidelines provide producers of Man-made Cellulosic Fibres (MMCF) with uniform criteria for measuring indicators such as wastewater, air emissions and other process-related parameters. The measured data is independently monitored and published.

Kelheim Fibres sees its ZDHC contributorship as another building block on the road to even more sustainable fibre production:
"We want to develop our industry with our know-how towards a greener future. Sustainability is an integral part of our corporate philosophy and strategy. We fully support ZDHC's vision of a widespread implementation of sustainably chemistry, driving innovations and best practices in textile, apparel and footwear industries to protect consumers workers and the environment," says Craig Barker, CEO at Kelheim Fibres.

"ZDHC provides us with access to a range of best practices in chemical management and gives us the opportunity to network and learn from each other with like-minded industry partners. ZDHC's collaborative approach will accelerate the shift to a more responsible industry and we want to contribute to that."

• The new platform created for b2b / b2c online sales entirely dedicated to the business of denim.

The year 2020 witnessed an acceleration in the importance of online sales. It is now clear to anyone involved the business of sales that e-commerce represents the future.

That’s when the creative idea by Laura Pianazza, founder of DENIMAZING (combination of DENIM and AMAZING), was launched on the platform powered by VELVET.  Its prime objective is to help small and medium sized companies to increase their online sales, focusing on the development of marketing strategies in an omnichannel environment thanks to an intelligent balance between technology and professional experience.

Laura Pianazza derives her professional experience from the editorial sector, where she was active for many years on a European level for a trade magazine specialized in the denim business. Thanks to this background, she was able to develop a strong network of contacts with entrepreneurs, top management and marketing agencies. Her constant interaction with customers shed light on the digital challenges present in most Italian companies: firstly, the fragmentation of services offered online and, secondly, the lack of integration between technology and marketing strategies. The latter is the one most often neglected by firms and Laura recognized many risked not being well prepared for this transformational shift in business by investing little time and at a slow pace.

The DENIMAZING project works side by side with denim fabric manufacturing companies (b2b), finished product brands and distribution companies (b2c), all with the same common denominator: denim. A unique service assisting raw materials manufacturers in finding market niches in companies that create product, who in their own right would like their brand to be seen and sold to a growing customer base. In the b2b landscape, companies can sell their own fabrics by the meter thanks to their own 3D presentation and customers can virtually visit their showrooms. Similarly, brands will have the same possibility to sell their creations as on a real e-commerce site, thanks to virtual tours in their showroom and specific areas for sales and/or chatting/videocalls with end-customers. Instead, for companies providing supply chain services (coloring, washing, etc.), individual virtual rooms will be made available inside the marketplace, in order to speak directly with sales managers from brands and the fabric companies.

The business side is just one aspect of this project. Thanks to its partnership with the marketing and online sales agency VELVET, DENIMAZING grows based upon a series of key tasks during different phases, namely: platform construction, marketing and advertising, both traditional and via web and social medias.

Not only has Laura has added a series of high-level technology/web master courses to her experience, but DENIMAZING also brings together a team of qualified professionals having a longtime experience in different fields of the denim business: sales, entrepreneurs, web design and marketing, while the end-customer will be in direct contact with the headquarters for assistance, customer care and updates.

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

• PrimaLoft and Origin Materials have launched a program to develop high-performance, carbon-negative insulating fibers for diverse apparel applications, including for leading outdoor, fashion, and lifestyle brands, as well as home goods applications such as hypoallergenic insulated bedding.
• PrimaLoft, an advanced material technology company and a world leader in the development of high-performance insulations and fabrics, will develop the fibers with Origin Materials to address demand for sustainable, high-performance materials from its over 900 global brand partners. PrimaLoft iconic brand partners include Patagonia, Stone Island, L.L. Bean, Lululemon, adidas and Nike.
• The program will focus on carbon-negative PET and next-generation polymers produced by the Origin Materials patented technology platform, which turns sustainable wood residue into cost-advantaged, carbon-negative materials that reduce the need for fossil resources.

Origin Materials, Inc. (“Origin Materials”), a leading carbon negative materials company, and PrimaLoft, an advanced material technology company and a leader in the development of high-performance insulations and fabrics, announced a new program to develop carbon-negative, insulating, high-performance fibers. The fibers will be used across a diverse array of end products, including insulating fiber for leading outdoor, fashion, and lifestyle brands, as well as home goods applications such as hypoallergenic insulated bedding.

The companies will work to rapidly develop and commercialize new products derived from Origin Materials’ platform. The collaboration will leverage the leadership position of PrimaLoft as a specialty producer of insulating fibers and filaments with over 900 global brand partners, as well as a large global network of manufacturers that employ a wide array of textile processes to make its products, including extrusion, carding, spinning, finishing, weaving, knitting, dyeing, airlaid, meltblown, and other technologies.

The collaboration builds on PrimaLoft’s “Relentlessly Responsible™” mission to elevate both performance and sustainability, through innovation. The platform includes PrimaLoft® Bio™, which was developed and launched into the market in late 2018 as an effort to battle microplastics in the ocean; PrimaLoft® P.U.R.E.™, which provides materials manufactured with greater than 50% CO2 savings; and PrimaLoft’s post-consumer recycling initiative. The next frontier for the company is non-petroleum based raw materials, including products that biodegrade and other circular economy solutions.

We aRe SpinDye (WRSD) and Gina Tricot have entered into a collaboration agreement. The partnership formed between the two companies is a strategic milestone for both parties.

"Gina Tricot has made impressive progress in the area of sustainability recently and it is fantastic that we get the opportunity to participate and contribute going forward", says Andreas Andrén, CEO of WRSD and continues: "The collaboration is completely in line with our ambitions to become an industry standard for coloring recycled polyester."

Gina Tricot is a Swedish brand that offers fashion to women in over 30 countries.
"Together with WRSD, we can create a better, more sustainable and circular fashion industry. We are convinced that the future lies in collaboration and innovation between the various tiers of our value chain", says Emma Garrote Fredman, Global production & Sustainability manager at Gina Tricot.

After a turbulent year, it seems strange to be thinking about ‘after the pandemic’, but with millions of vaccinations underway, the light at the end of the tunnel is visible. As we turn the corner, choosing technology partners that understand how to proactively respond to changing market needs and support the evolving requirements of print businesses and end customers will be vital. The printers in Mimaki’s ‘100 series’ portfolio, which consists of the high quality, high productivity entry level roll-to-roll inkjet printers the UJV100-160 UV and the JV100-160 solvent, and the high performance textile printer, the TS100-1600, are a perfect reflection of the way technology requirements are adapting in line with the industry as we look to the future. To demonstrate this, we have identified three post-pandemic technology touchpoints that will help print businesses target success amid uncertainty.

• Productivity

The pandemic has served as a major catalyst for existing trends, and our growing appetite for everything on-demand has been given a huge COVID-related boost. For printers, a digital solution that offers premium productivity, quality and efficiency at an entry-level price point is sure to be an invaluable investment to meet evolving ‘on-demand demands’. Adding a digital production element to your business doesn’t need to be daunting, complicated or overpriced – the Mimaki ‘100 series’ truly lives up to the tagline ‘Expert Printing Made Easy’, offering an incredibly intuitive user experience for streamlined, ultra-efficient printing, high-quality output, and cost-effective implementation. The powerful and productive new textile printer in the ‘100 series’, the TS100-1600, is a shining example of equipment developed with the future of the market in mind – the textile industry is fast-paced and constantly innovating, and the printer you invest in needs to keep up with your creativity.

• Diversity

2021 is set to be a period of transition. While that will mean navigating uncertainty, the ‘glass half full’ approach is to view the year ahead in terms of opportunities such as expanding your business, exploring alternative revenue streams, and taking the plunge into new markets. In the past, it may have felt as if the barriers to entry when it came to looking beyond your core business were too great. However, in a post-pandemic world, we need to break some of those barriers down and demonstrate that success with digital print is within reach if you invest in the right equipment. With the ‘100 series’ portfolio, Mimaki is acknowledging what print service providers need from their technology partners – the UJV100-160 and the JV100-160 are suitable for a wide range of applications that will allow you to easily and affordably diversify your offering, and with the TS100-1600 textile printer, it has never been easier to target growth in the thriving textile sector, even in challenging times.

• Affordability

Affordability is one of the most significant barriers to entry into new markets. 2020 was a year of unprecedented economic challenges, so it’s more important than ever to be thinking about gaining a competitive edge, and the printers in the ‘100 series’ from Mimaki have been specifically formulated to help you ramp up productivity while keeping running costs low. Whether you want to take your first foray into digital print production, expand the services you offer or simply grow your customer base, cost can be a major sticking point, which is why supporting customers is Mimaki’s number one priority, designing the ‘100 series’ around your needs and continuing to listen to how those needs are developing. Making an investment in the JV100-160 in order to move into outdoor graphics; meeting demand for faster turnaround times by adding the instantly curable UJV100-160 to your production setup; or taking a leap into new revenue streams with the TS100-160 – it’s all ‘100’ percent accessible.

•  JEC GROUP and AVK to launch new Composites Event for the D-A-CH Region

JEC Group and AVK, the Federation of Reinforced Plastics e.V. in Germany have joined forces to organize an annual event for the D-A-CH Region, dedicated to all forms of Composites and their applications. The first edition of the JEC Forum DACH, unique in its format and content, will take place in Frankfurt am Main, Germany at Messe Forum, from November 23 to 24, 2021. The event will take place at a different location each year to highlight the dynamics and the variety of the composites industry in the DACH region.

JEC Group is launching the JEC Forum DACH in partnership with AVK. Unique in its format, the event will be rotating to different cities in Germany, Switzerland and Austria  every year. This first edition will take place in Frankfurt am Main, Germany, from November 23 to 24, 2021.

JEC Forum DACH will include pre-arranged business meetings between sponsors and attendees as well as sponsors workshops. The event will present exclusive content such as an extensive composites conferences program, the annual AVK market overview — also available via live-streaming technology for remote participants — and, last but not least, the prestigious AVK-JEC Innovation Awards.
The JEC Startup Booster competition will also be introduced in the D-A-CH region for the first time. JEC Forum DACH will also provide a Composites Tour to enable participants to visit key players of the local composites ecosystem on November 25.

This event's primary aim is to support the bustling composites industry in this region and resume business after a challenging, yet complex period of time. The event´s agile format will focus on a different application sector, industry as well as other regional composites-related specifities every year. The final goal is to develop business, to connect and reach out to the local industrial apparatus and its major players such as universities, research and development centers and companies of all sizes in a boosting business and innovation spirit.

Devan, one of the leading companies in sustainable and functional textile finishes, has been working together with Jeanologia, a global leader in sustainable and efficient finishing technologies for textiles, to reduce further water consumption during the application of Devan’s awarded BI-OME® antimicrobial and R-Vital® skincare range.

With increased attention to climate change and limiting excess water consumption in textile production (whether denim or other textiles), Devan and Jeanologia worked together to evaluate the application of Devan finishes onto garments via the patented e-Flow technology.

e-Flow technology can accomplish a considerable number of finishing effects with the highest quality, a minimal amount of water and zero discharge. The technology uses micronization and nebulization to substitute traditional abrasion process and deliver performance chemistry using nano-bubbles instead of water. It reduces the cost of application, saves the amount of water used and ensures that the correct amount of chemistry stays in the garment and not in the water. e-Flow is the perfect fit for every industrial washing machine. This allows mills and brands to apply Devan’s technologies in a more sustainable way than using traditional application equipment, even for smaller production runs and direct onto garments.

“With the global textile production using 4% of the global freshwater withdrawal, here at Devan we are continuously working on more sustainable solutions”, says Dr. Vanessa Daelman, CTO at Devan. “Next to this, we of course highly value sustainable application methods from Jeanologia, like e-Flow, in order to reduce the excess water usage during textile application. We are delighted that we could work together with Jeanologia and establish that Devan technologies can be easily applied via these technologies onto garments or fabrics like denim and with full retention of functionality. This application method also allows post garment treatment of our finishes, for example an antimicrobial treatment onto already finished garments, which will be increasingly important in a more circular textile world where re-use plays an important role”, Dr. Daelman concludes.