From the Sector

Reset
343 results
14.10.2021

NCTO's Statement on Global Supply Chain Crisis

The National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement following President Biden’s remarks on the global supply chain crisis and stressed the importance of investing onshoring and nearshoring:

"We appreciate President Biden’s call to ensure we are building more resilient and reliable supply chains and to invest in our manufacturing industries here at home, in his address earlier today.

There is a reason we got into this mess and there is a reason we have a global supply chain crisis. Years of offshoring production in a race to the bottom –exacerbated by predatory trade practices that have undermined so many manufacturing industries--has led to a tipping point. In fact, it was not too long ago that nurses in New York City and beyond were wearing garbage bags as gowns as our overreliance on Chinese production chains exposed severe fragilities in keeping our health care workers safe during the height of the pandemic.

The National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement following President Biden’s remarks on the global supply chain crisis and stressed the importance of investing onshoring and nearshoring:

"We appreciate President Biden’s call to ensure we are building more resilient and reliable supply chains and to invest in our manufacturing industries here at home, in his address earlier today.

There is a reason we got into this mess and there is a reason we have a global supply chain crisis. Years of offshoring production in a race to the bottom –exacerbated by predatory trade practices that have undermined so many manufacturing industries--has led to a tipping point. In fact, it was not too long ago that nurses in New York City and beyond were wearing garbage bags as gowns as our overreliance on Chinese production chains exposed severe fragilities in keeping our health care workers safe during the height of the pandemic.

China’s virtually unlimited and unrealistic pricing power coupled with its subsidies and lack of enforceable environmental standards strips benefits and undermines policy objectives, and leaves us in an untenable situation of overreliance on a foreign supply chain for critical products and raw materials. This must change.

We must hold China accountable for predatory trade practices that have offshored our industries and our jobs. We must onshore and nearshore more textile and apparel production chains out of Asia to the U.S. and also to Western Hemisphere trade partners. This has a multitude of benefits to ensure more reliability in production and also has remarkable job benefits to U.S. manufacturers and our allied trading partners who adhere to higher labor and environmental standards. Further, it will help address the migration crisis and grow better paying jobs.

Now is the time to we need to unlock long-term commitments to source product from the USA and from our Hemispheric partners.  If we moved another 10 percent of global production to the U.S. and the Hemisphere, imagine the benefits that could be achieved.  Ensuring further verticalization and investment in all aspects of the industry, from raw materials to finished products, is good for the American economy and workers in the U.S. and in the region.

Our industry stands ready to help and provide the solutions to onshore and nearshore these production chains that benefit manufacturing workers, the U.S. economy, our Western Hemisphere allies, and consumers.   Further, onshoring and nearshoring these critical production chains has remarkable benefits for the environment and addresses the growing, systemic and alarming issues associated with climate change.  

It is critical that supply chains mitigate risks so that we are never in this situation again.  We appreciate President Biden recognizing the value of onshoring these critical production chains and stand ready to work with the administration in these efforts."

More information:
NCTO
Source:

NCTO

13.10.2021

Sales partnership for Switzerland starts at Fakuma 2021

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

"GRAFE fits perfectly into our product portfolio," says Thomas Weigl, co-owner and responsible for business development at the Swiss distribution company, whose employees recently underwent intensive training in Blankenhain. "Our customers come from the sports goods, housing technology, automotive supplier and medical technology sectors - there are many synergies with GRAFE." Weigl himself has extensive experience in the masterbatch sector and has worked for two companies in the industry - Sukano and Americhem - as managing director. "Swiss companies want Swiss contact persons. We speak the languages German, Italian and French, are on site in the shortest possible time, offer direct contact and understand the needs of the customers and the requirements of the market," he explains. "Polynova is thus faster, closer and more direct." "The Swiss market is large and important for us," reports Theuerkauf and Weigl explains the background: "There are over 300 plastics processors, many are family-run and very technically oriented. The origins of the companies are often in the watch industry and in the production of the smallest precision parts such as gear wheels. In addition, coffee machine manufacturers, medical technology providers and automotive suppliers are important market players. A large number of well-known OEMs are located here."

Even though there are already masterbatch manufacturers in the Alpine country, says the sales expert, no one has the know-how to adjust compounds and masterbatches as perfectly and precisely as the company from Thuringia. In addition to a complete range of colours on practically all plastic substrates, flame retardants, UV additives, thermal stabilisers or lubricants are further examples of the extensive product portfolio. GRAFE is one of the specialists in the modification of thermoplastics and is an innovation driver in the production of colour masterbatches. "The technical possibilities in terms of a state-of-the-art technical centre and production machinery, as well as one of the largest research and development departments in the industry, are also not to be found elsewhere on the Swiss market. Our task now is to bring these to the attention of domestic customers," says Thomas Weigl, co-owner of Polynova AG together with founder Renato R. Huebscher.

Source:

GRAFE Advanced Polymers GmbH

DyStar Releases 2020 – 2021 Integrated Sustainability Report (c)dystar
Sustainability Performance Report 2020-2021
13.10.2021

DyStar Releases 2020 – 2021 Integrated Sustainability Report

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

The Group has set its sight on achieving the 2025 sustainability target of reducing its production footprint by 30% from 2011 levels for every ton of production. “We will continue to innovate and develop a wide range of products and processes that improve environmental performance and reduce carbon footprint across our value chain”, said Mr Xu Yalin, Executive Board Director of DyStar Group.

Mr Eric Hopmann, CEO of DyStar Group added: “We are also developing various projects in anticipation of future demands from customers as well as adopting more environmentally friendly technologies and improve our workflows and processes. Some of our projects include traceability programs, adopting renewable energy technologies, and digitalizing our business processes.” Understanding the importance of collaborative efforts to drive sustainability across the value chain, DyStar seeks to continually support industrial innovations and develop strategic partnerships to work towards becoming a sustainable and trusted leader in the industry.

Source:

DyStar Press Info

(c) Euratex
EU-27 Textile & Clothing Turnover
12.10.2021

EURATEX: Latest economic data confirm further recovery of the textile and clothing industry

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

In quarter-on-quarter terms, the EU turnover showed signs of improvements across the sector. The textile turnover increased by +3.3% in Q2 2021, after slightly contracting in Q1 2021. Similarly, the business activity in the clothing sector expanded by +7% in Q2 2021, after increasing by +1% in the previous quarter.
 
In the 2nd quarter 2021, the EU-27 trade balance for T&C improved, resulting mostly from an increase of export sales across third markets and a drop of textile imports. T&C Extra-EU exports boomed by +49% as compared with the same quarter of the previous year. T&C Extra-EU imports went down by -26% as compared with the same quarter of the previous year, following a decrease of imports from some main supplier countries. EU imports from China and the UK collapsed due to a combination of Brexit and weaker demand in Europe.
 
During the second quarter of 2021, job creation was slowly stabilising in the textile industry (-0.2% q-o-q), while employment in the clothing sector continued to be affected by lower levels of production activity in industry during the first part of the year (-1.2%). When compared to its pre-pandemic level in Q4 2019, EU employment in Q2 2021 was still 4.4% down in textiles and 11.8% down in clothing.

However, this fragile recovery is hampered by higher shipping costs and prices’ increase in raw materials and energy. The cost of energy, in particular gas, has increased more than 3 times since the beginning of this year. Since the announcement of the EU’s “Fit for 55” package, we have seen CO2 prices rising above €60. This inevitably has an impact on the industry’s competitiveness, especially in a global context. The future recovery is also threatened by some factors limiting production, such as shortage of labour force and equipment, which are putting additional pressure on T&C industries.

Director General Dirk Vantyghem commented on these latest figures: “Our companies have shown great resilience during the pandemic, and their latest export performance is an encouraging sign of recovery. This recovery may however be disrupted by the current supply chain and energy problems. Once again, recent developments show that this transition towards more sustainable production can only work if organised in a global context, avoiding carbon leakage and with an effective level playing field. This must be considered in the upcoming EU Textiles Strategy.”

More information:
Euratex
Source:

Euratex

(c) Brückner Trockentechnik GmbH & Co. KG
23.09.2021

WEIDMANN and BRÜCKNER: New standards in stenter technology

WEIDMANN GmbH in Süßen is known worldwide as a specialist for the finishing of fiber and down-proof articles and woven industrial fabrics. Customers particularly appreciate the company's reliability and flexibility with regard to their individu-al requirements, and consistently high quality of its products. The Swabian textile manufacturer finishes premium fabrics, mainly for the bedding industry, using the latest technology and in an environmentally conscious manner.

WEIDMANN GmbH in Süßen is known worldwide as a specialist for the finishing of fiber and down-proof articles and woven industrial fabrics. Customers particularly appreciate the company's reliability and flexibility with regard to their individu-al requirements, and consistently high quality of its products. The Swabian textile manufacturer finishes premium fabrics, mainly for the bedding industry, using the latest technology and in an environmentally conscious manner.

The complex production and finishing processes for high-quality fabrics require a reliable and efficient machine technology. With this in mind, WEIDMANN has always relied on the proven stenter technolo-gy from BRÜCKNER. For many decades, the German textile machinery manufacturer has been a world leader in the con-struction of production lines for the finishing of classical textiles, woven industrial  fabrics, nonwovens, glass fabrics and floor coverings. In addition to stenters, the company's production program also in-cludes coating lines, relaxation dryers, sanfor lines, continuous dyeing lines as well as ovens for the bonding of nonwovens and other special lines. All machines are produced 100% in-house in Germany.

Both companies continuously invest in new and innovative technology in order to be successful and competitive today and in the future. Only Recently, a completely newly developed BRÜCKNER stenter was installed in the ultra-modern plant at WEIDMANN. During the intensive project engineering phase it soon became clear which features are of special importance for their daily production requirements:

  • uniform moisture distribution in the machine entry and during pick-up of the specialized   chemicals in the finishing padder before the thermoprocess
  • weft-straight fabric flow with minimized residual distortion
  • very good accessibility for maintenance and daily cleaning
  • sensor technology and automation of setting parameters for energy optimization
  • heat-recovery with hot water generation for the dye house
  • the line must be fully Industry 4.0 capable
Source:

Brückner Trockentechnik GmbH & Co. KG

23.09.2021

NCTO: U.S. Trade Representative Katherine Tai highlights U.S. Textile Industry

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

The Ambassador’s visit to Milliken included a tour of the company’s Magnolia plant in Blacksburg, S.C., and a roundtable discussion highlighting the important role women contribute to textiles, the critical need for policies supporting a domestic supply chain, and the significant impact of the sector to the U.S. economy. Milliken is one of the largest textile companies in the U.S., employing more than 6,000 associates domestically and an additional 1,350 associates globally. Milliken’s Textile Business alone employs 2,500 people across eight counties in South Carolina and is the fourth largest manufacturing employer in the Upstate.

On the second leg of her trip, Ambassador Tai visited American & Efird’s manufacturing facility in Mount Holly, N.C. American & Efird operates as part of Elevate Textiles and its global portfolio of advanced products and distinguished textile brands, including A&E, Burlington, Cone Denim, Gütermann and Safety Components, and representing more than 500 years of textile manufacturing knowledge.

During the visit, U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industry participated in a roundtable with the Ambassador at which they discussed the competitiveness of the domestic industry, outlined priority issues in Washington, such as the importance of the Western Hemisphere co-production chain and ways to jointly support domestic supply chains through Buy American and Berry Amendment policies that help onshore production, spur investment, maintain the safety and security of our armed forces and generate new jobs.

Launch of a new ISO certification standard (c) AMAC
Möcke + Mörschel + Effing
22.09.2021

Launch of a new ISO certification standard

Textechno reports launch of a new standard for the drapability and deformability of fabrics and non-wovens: ISO 21765

World market leader for precision testing equipment Textechno and their partner SAERTEX, global market leader in non-crimp fabrics (NCF) are proud to announce that the newly developed international standard ISO 21765:2020 to quantify material behaviour in terms of drapability and deformability was recently published by ISO.

The new standard ISO 21765 allows the world-wide comparable measurement of all relevant parameters regarding the deformability and drapability of all kinds of fabrics, including woven fabrics and NCFs as well as knitted fabrics and non-wovens on Textechno´s precision testing equipment DRAPETEST. This can be very useful in the carbon fibre recycling since one of the most efficient applications of recycled carbon fibres will be in non-wovens.

This is the first testing instrument world-wide to quantify not only the force which is required for deforming a fabric, but also the various defects such as gaps, undulation, or wrinkles which can arise due to the deformation.

Textechno reports launch of a new standard for the drapability and deformability of fabrics and non-wovens: ISO 21765

World market leader for precision testing equipment Textechno and their partner SAERTEX, global market leader in non-crimp fabrics (NCF) are proud to announce that the newly developed international standard ISO 21765:2020 to quantify material behaviour in terms of drapability and deformability was recently published by ISO.

The new standard ISO 21765 allows the world-wide comparable measurement of all relevant parameters regarding the deformability and drapability of all kinds of fabrics, including woven fabrics and NCFs as well as knitted fabrics and non-wovens on Textechno´s precision testing equipment DRAPETEST. This can be very useful in the carbon fibre recycling since one of the most efficient applications of recycled carbon fibres will be in non-wovens.

This is the first testing instrument world-wide to quantify not only the force which is required for deforming a fabric, but also the various defects such as gaps, undulation, or wrinkles which can arise due to the deformation.

In the frame of a publicly funded project which started in 2011, Textechno developed the award-winning automatic drapability tester DRAPETEST along with other partners, amongst them SAERTEX.  

Dietmar Möcke, CTO at SAERTEX says: „With ISO 21765, we finally have a standardized testing method with world-wide validity. It allows us to provide our customers with comparable and reproducible measurement values regarding the draping characteristics of our products.”

Ulrich Mörschel, Managing Director of Textechno adds: “We are grateful for the support from all around the world allowing us to establish the new ISO standard. The standard finally fills a gap in the testing methods for fabrics both in the fields of textiles and composites.”

Dr. Michael Effing, Managing Director of AMAC GmbH and Senior Advisor to Textechno: “A lot of research is dedicated to new production technologies of composites, non-crimp fabrics and classical fabrics for thermosets have with 33 % a significant market share in the production of all composite materials. The application of the new standard for non-wovens from recycled carbon fibres comes perfectly on time for this market sector which will gain more and more importance within the next years.

Source:

AMAC GmbH

Asahi Kasei to reshape its ROICA™ premium stretch fiber business global production strategy (c)ROICA™
ROICA™ premium stretch fiber
22.09.2021

Asahi Kasei to reshape its ROICA™ premium stretch fiber business global production strategy

  • Asahi Kasei Corporation markets premium stretch fiber under the brand of ROICA™, with superior performance features enabled by integrated production from raw material to yarn based on its advanced technology.
  • The specialized global holding operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with strategic sales facilities around the world.

With deep regret, Asahi Kasei has taken the decision to restructure its production strategy in order to face the new, unexpected and critical market situation. As part of this process, the production and sales of ROICA™ at its German subsidiary, Asahi Kasei Spandex Europe GmbH in Dormagen, will be discontinued by March 31, 2022.
 

  • Asahi Kasei Corporation markets premium stretch fiber under the brand of ROICA™, with superior performance features enabled by integrated production from raw material to yarn based on its advanced technology.
  • The specialized global holding operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with strategic sales facilities around the world.

With deep regret, Asahi Kasei has taken the decision to restructure its production strategy in order to face the new, unexpected and critical market situation. As part of this process, the production and sales of ROICA™ at its German subsidiary, Asahi Kasei Spandex Europe GmbH in Dormagen, will be discontinued by March 31, 2022.
 
Recognizing the paramount importance of the European market, especially when it comes to smart innovation where ROICA™ is a leader, and with the goal of continuing the excellent longtime work with valued partners, customers and supply chains, Asahi Kasei will continue to develop sales, technical and marketing services in Europe through Asahi Kasei Europe, the European regional headquarters of the Asahi Kasei Group. It will especially focus on ROICA™ added value products manufactured at its ROICA™ production sites in Asia.
 
Through this process, Asahi Kasei will reshape the efficiency and productivity of its global ROICA™ operation by keeping a strong focus on responsible innovation and sustainability in close communication, and safeguarding its business partners.
 
As a manufacturer of superior quality, highly functional and sustainable ROICA™ products, Asahi Kasei will continue its journey of responsible innovation aiming to provide solutions to the textile industry and to contemporary consumers, by enhancing production capabilities and expertise at the global sites supported by an expert, wise and efficient company.

More information:
ROICA™ Asahi Kasei Fibers
Source:

GB Network

Techtextil India. Messe Frankfurt
16.09.2021

TN Government signs up for Techtextil India 2021

  • Pushing technical textile investments into the State

In a bid to strengthen indigenous production through the state and attract investors, the nodal agency for investment promotion and facilitation for the Government of Tamil Nadu – Guidance has signed up for Techtextil India 2021 – the leading International Trade Fair for Technical Textiles and Nonwovens. The TN Government will be promoting technical textile policies through both physical and virtual segments of the hybrid fair, enabling investors to set up integrated facilities. Leading technical textile players from Tamil Nadu and across the nation confirm participation for the three-day business event.
 
As one of the first major business events in India for the technical textile sector since the pandemic, Techtextil India 2021 will reunite the industry to present a strong showcase of technical textile technologies crucial for the development of India across industries such as healthcare, agriculture, construction, infrastructure, sports, apparel etc. The first hybrid edition will take place from 25 – 27 November 2021 at the Bombay Exhibition Centre in Mumbai.
 

  • Pushing technical textile investments into the State

In a bid to strengthen indigenous production through the state and attract investors, the nodal agency for investment promotion and facilitation for the Government of Tamil Nadu – Guidance has signed up for Techtextil India 2021 – the leading International Trade Fair for Technical Textiles and Nonwovens. The TN Government will be promoting technical textile policies through both physical and virtual segments of the hybrid fair, enabling investors to set up integrated facilities. Leading technical textile players from Tamil Nadu and across the nation confirm participation for the three-day business event.
 
As one of the first major business events in India for the technical textile sector since the pandemic, Techtextil India 2021 will reunite the industry to present a strong showcase of technical textile technologies crucial for the development of India across industries such as healthcare, agriculture, construction, infrastructure, sports, apparel etc. The first hybrid edition will take place from 25 – 27 November 2021 at the Bombay Exhibition Centre in Mumbai.
 
Announcing a close co-operation with Messe Frankfurt India for the 2021 edition, the Government of Tamil Nadu further shared that it will be promoting textile policies and highlighting investment prospects at the trade fair in a bid to attract companies and investors to the state. Ms  Pooja Kulkarni IAS MD & CEO, Guidance Tamil Nadu said: “While there are several inherent advantages for the growth of technical textiles in Tamil Nadu specifically, many raw materials used in the production of sanitary products, artificial ligaments, seat belt webbings, airbags are still heavily imported. In this context, the Techtextil India Forum can help us reduce import dependency and bring investments in R&D, manufacturing, innovation by partnering with global technical textiles companies.

More information:
Techtextil India
Source:

Messe Frankfurt Hongkong

15.09.2021

Kelheim Fibres Innovative Viscose Specialities at INDEX20

Not only since 2021 has sustainability been a topic high on society’s agenda. And yet the importance of sustainability for consumers and companies has once again increased sharply as a result of the Corona pandemic, as numerous studies confirm. Then why is it often so difficult to implement this conviction in everyday life? One of the biggest obstacles to sustainable consumer behaviour is the lack of availability of alternatives.

In addition to changing consumer demands, the EU Commission's recent decision on the single-use plastics directive is also prompting many nonwovens manufacturers to look at alternative solutions. Kelheim Fibres is exhibiting at this year's INDEX in Geneva and online with bio-based fibers that offer an alternative to synthetic materials in a wide range of applications. The Bavarians have decades of experience in the nonwovens and hygiene sectors and work on individual customer-specific innovations.

Not only since 2021 has sustainability been a topic high on society’s agenda. And yet the importance of sustainability for consumers and companies has once again increased sharply as a result of the Corona pandemic, as numerous studies confirm. Then why is it often so difficult to implement this conviction in everyday life? One of the biggest obstacles to sustainable consumer behaviour is the lack of availability of alternatives.

In addition to changing consumer demands, the EU Commission's recent decision on the single-use plastics directive is also prompting many nonwovens manufacturers to look at alternative solutions. Kelheim Fibres is exhibiting at this year's INDEX in Geneva and online with bio-based fibers that offer an alternative to synthetic materials in a wide range of applications. The Bavarians have decades of experience in the nonwovens and hygiene sectors and work on individual customer-specific innovations.

"We want to make it easy for consumers to choose an environmentally friendly option. That’s the case when bio-based solutions offer the same performance as synthetic products," said Matthew North, Commercial Director at Kelheim Fibres." Our fibre technology allows us to create just that: unlike natural fibres, which are available already in fibre form and can only be treated on the surface, we can engineer the properties of our fibres they need for specific applications by specifically intervening in the production process. That way we combine nature - our fibres are made of wood pulp - with performance."

Kelheim's special fibres are made of wood pulp from sustainably managed sources, are produced in Kelheim in an environmentally friendly way and are fully biodegradable at the end of their product life. Kelheim Fibres is the first viscose fibre manufacturer in the world with an EMAS validated Environmental Management System and was awarded a dark green/light green shirt in the most recent Canopy HotButton-Ranking.

More information:
Kelheim Fibres viscose fibers
Source:

Kelheim Fibres GmbH

Starlinger recoSTAR universal 165 H-VAC iV+ (c) Starlinger & Co Gesellschaft m.b.H.
15.09.2021

Recycled polyester filament yarn made in Turkey

Korteks, one of the world’s biggest yarn producers based in Bursa, Turkey, has started the production of recycled polyester filament yarn in its production facility using a Starlinger recycling line.

With the new recycling facility, which comprises a total closed area of 17,000 m² and has a monthly production capacity of 600 tons, Korteks was able to reduce the production waste at its virgin PES yarn site to zero.

The Starlinger recoSTAR universal 165 H-VAC iV+, which is part of Korteks’ 10 million dollars investment in a new polymer recycling facility, took up operation in May 2021. It has a production capacity of 7,200 tons per year and currently processes clean in-house polyester fibers from production scrap together with washed post-consumer PET flakes at a ratio of 50/50. Korteks uses the polyester regranulate at a share of 100 % for its new polyester filament yarn line it is going to market under the name “TAÇ Reborn”. With this investment, the company has made an important step towards establishing a circular economy in the Turkish textile industry.

Korteks, one of the world’s biggest yarn producers based in Bursa, Turkey, has started the production of recycled polyester filament yarn in its production facility using a Starlinger recycling line.

With the new recycling facility, which comprises a total closed area of 17,000 m² and has a monthly production capacity of 600 tons, Korteks was able to reduce the production waste at its virgin PES yarn site to zero.

The Starlinger recoSTAR universal 165 H-VAC iV+, which is part of Korteks’ 10 million dollars investment in a new polymer recycling facility, took up operation in May 2021. It has a production capacity of 7,200 tons per year and currently processes clean in-house polyester fibers from production scrap together with washed post-consumer PET flakes at a ratio of 50/50. Korteks uses the polyester regranulate at a share of 100 % for its new polyester filament yarn line it is going to market under the name “TAÇ Reborn”. With this investment, the company has made an important step towards establishing a circular economy in the Turkish textile industry.

The Starlinger recycling line is the first of its kind in Turkey and is equipped with special components for filament yarn recycling. A RSC (Rapid Sleeve Changer) candle filter developed by Starlinger ensures finest melt filtration down to 15 μm. It has been specially designed for polyester recycling and reaches an output of 1000 kg/h. For continuous operation the filter elements are changed “on the fly” without interrupting production, which significantly limits melt loss.

The viscoSTAR SSP unit at the end of the recycling process guarantees consistent IV increase according to the first-in-first-out principle. This makes sure that the produced regranulate has the ideal properties required for filament yarn production. The technical configuration of the line does not only allow the processing of a polyester fiber/PET flake mix as input materials, but also 100 % polyester filament scrap or 100 % PET bottle flakes.

Korteks expects the recycling market in general to grow as there is increased acceptance for recycled products in the society, and predicts the need for recycling solutions also for other synthetic and natural fibers.

Source:

Starlinger & Co Gesellschaft m.b.H.

Bemberg™ by Asahi Kasei at Filo to unveil its smart DNA story that meet contemporary consumer needs (c) Bemberg™
Waxewul proposal using Bemberg™.
15.09.2021

Bemberg™ by Asahi Kasei at Filo to unveil its smart DNA story that meet contemporary consumer needs

  • FILO, 29th-30th September 2021, booth C5

Bemberg™ by Asahi Kasei has been invited to showcase at Filo fair, the international exhibition of orthogonal weaving yarns for clothing and furnishings, circular knitwear and technical textiles, in a new special area, a dedicated open space reserved to sustainable fibers that will allow visitors to discover all their production cycle and performances, in full relax and transparency.

Bemberg™, an exceptional fiber made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, will brings to Filo its history, experience, know-how and market partnerships to prove its versatility and design-driven look and touch Last but not least we are talking about a true circular economy-oriented ingredient, with certified sustainable performance: Bemberg™ is biodegradable and compostable material as verified by the INNOVHUB 3rd party test and it has GRS (Global Reycled Standard) certification from Textile Exchange proving recycling authenticity.

  • FILO, 29th-30th September 2021, booth C5

Bemberg™ by Asahi Kasei has been invited to showcase at Filo fair, the international exhibition of orthogonal weaving yarns for clothing and furnishings, circular knitwear and technical textiles, in a new special area, a dedicated open space reserved to sustainable fibers that will allow visitors to discover all their production cycle and performances, in full relax and transparency.

Bemberg™, an exceptional fiber made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, will brings to Filo its history, experience, know-how and market partnerships to prove its versatility and design-driven look and touch Last but not least we are talking about a true circular economy-oriented ingredient, with certified sustainable performance: Bemberg™ is biodegradable and compostable material as verified by the INNOVHUB 3rd party test and it has GRS (Global Reycled Standard) certification from Textile Exchange proving recycling authenticity.

Bemberg™ application history starts with high-quality suit lining, but today we can find it in many other applications such as fashion couture, outerwear, innerwear, bedding, and sportswear where its amazing unique touch and quality is offering a distinctive performance.

And to prove all of this, Bemberg™ will be at Filo showing some selected fabric innovation, and three responsible-driven designers representing different and complementary part of contemporary consumer wardrobe: ZEROBARRACENTO, Maurizio Miri and WAXEWUL - who have all chosen Bemberg™ fiber to create special collections. Three different ways to see and represent how sustainability and style – even if completely different ones – together can be highly successful, performing and interesting to the new consumer.

ZEROBARRACENTO, a gender-neutral emerging outerwear brand focusing on zero-waste product development, selects Bemberg™ for two fundamental reasons: firstly, from a stylistic point of view for its extreme versatility: in the various collections we have adopted it to create Kimonos, padded jackets, wrap dresses as well as for the interiors of our garments, which are intended to be soft embraces for total physical and mental comfort. The second but no less important reason is that this fibre has circular values in line with their zero-waste commitment.

The concept of the brand "Maurizio Miri" has a strong personality and a clear intent: to create a product that stimulates the wearer towards beauty. A garment should not simply be worn, but it has also to create a perfect symbiosis with the person wearing it and generate an exchange of positive energies. The purpose is to make the individual feel in perfect harmony with their own image. With this aim in mind, the designer selects extremely precious Bemberg™ linings for their sophisticated tailor jackets. 

Finally, WAXEWUL, a brand of sartorial clothing and artisan accessories with an urban-afro soul that has environmental and social sustainability as its basic ethics. WAXEWUL will bring to Filo its brand-new product, the J_Hood Bag: a doubleface jacket with a comfortably removable hood that can be transformed into a finely hidden doubleface bag. An exclusive, innovative and sustainable garment with minimal impact on the environment made of BemBAZIN™ - a new generation of bazin created, patented and produced by Brunello which is composed by the high-tech and responsible fibers of Bemberg™ - on one side and of wax on the other, traceable and certified, guaranteeing a reduction in waste (two jackets in one) and a long-life cycle.

15.09.2021

REACH4Textiles: Better market surveillance for textile products

The REACH4texiles project just kicked off. Funded by the European Commission, it aims at exploring solutions for fair and effective market surveillance on textile products.

Every year, about 28 billion of garments circulate across Europe, 80% of which are imported from outside the EU and its jurisdiction.
 
Inevitably, such huge volumes pose enormous challenges for market surveillance authorities which are called to ensure that uncompliant dangerous products are kept away from the EU citizens.

The European Union has the world most comprehensive chemical legislation which is set to protect consumers, the environment and, theoretically, even the competitiveness  of the business.

Such EU chemical legislation evolves constantly, increasing scope and ambition. New restrictions impact authorities and sectors like the European textile value chain and generate new costs for all actors.

Evidence suggests that such advanced regulatory framework is not completed with an equally advanced or effective EU-wide control system capable of ensuring compliance, especially in the case of imported products.

The REACH4texiles project just kicked off. Funded by the European Commission, it aims at exploring solutions for fair and effective market surveillance on textile products.

Every year, about 28 billion of garments circulate across Europe, 80% of which are imported from outside the EU and its jurisdiction.
 
Inevitably, such huge volumes pose enormous challenges for market surveillance authorities which are called to ensure that uncompliant dangerous products are kept away from the EU citizens.

The European Union has the world most comprehensive chemical legislation which is set to protect consumers, the environment and, theoretically, even the competitiveness  of the business.

Such EU chemical legislation evolves constantly, increasing scope and ambition. New restrictions impact authorities and sectors like the European textile value chain and generate new costs for all actors.

Evidence suggests that such advanced regulatory framework is not completed with an equally advanced or effective EU-wide control system capable of ensuring compliance, especially in the case of imported products.

The REACH4texiles project aims at exploring solutions for fair and effective market surveillance on textile products; it pools together the key actors to address three objectives:

  • Keep non-compliant products away from the single market.
  • Increase skills and knowledge.
  • Support a Network addressing chemicals in textiles and applying the EU regulation 2019/1020

The 2 years project will share best practices, identify efficient approaches against non-compliant products, offer training and support for a more effective surveillance and for level playing field.

The project welcomes collaboration with concerned authorities across the EU Member States.

Details:

A well-functioning EU market surveillance system is an essential prerequisite to protect citizen, the environment and competitiveness of responsible business. When it comes to textiles, the broad range of products, the large set of REACH subjected chemicals used in textiles as well as industrial strategies like fast fashion make this a challenging task.

Challenges may include lack of resources, difficulties in identifying higher risk products, cost and management of chemical tests, lack of test methods and knowledge of best practices. These challenges are yet likely to increase with the upcoming REACH restrictions and the growth of e-commerce.

Because of this, products that do not comply with REACH regulations encounter today little or no barriers to enter the market. This creates not only a health risk for Europeans but also undermines the competitivity of responsible businesses that take all necessary measures to comply with these regulations.

Addressing the challenges requires more knowledge at market surveillance and stronger collaboration between these authorities, the textile and clothing industry and testing laboratories. More knowledge about the identification of risk baring textile products and REACH chemicals likely to be used in these products, suitable test methods and strategies such as fast screening on REACH chemicals, trustworthiness of labels, etc can increase the effectiveness of market surveillance considerably.

The REACH4Textiles first objective (keep non-compliant products away from the EU Market) will be pursued by increasing knowledge on market surveillance functioning by and working on a risk-based approach to identify products at higher risk.

The second objective supports a network to address the specificities of chemicals in textiles with market surveillance authorities and involving other relevant stakeholders. The third objective focuses on sharing knowledge with market surveillance actors on textile products and suitable test methodologies.

Supported by the European Commission DG Growth, the project team is coordinated by the Belgian test and research center Centexbel and include the European Textiles and Apparel industry confederation, EURATEX, the German national textile and fashion association Textile und Mode, t+m, the Italian association Tessile e Salute. Several other European industry associations and national authorities are welcomed to become involved through the project activities.   

More information:
Euratex market surveillance Import
Source:

Euratex

09.09.2021

Texcare International will not take place in 2021

  • Leading suppliers of textile-care technology cancel their participation

Leading suppliers of laundry and dry-cleaning technology have used the free cancellation deadline offered by Messe Frankfurt against the background of the pandemic and cancelled their participation in Texcare International 2021 shortly before expiry. In view of this the Advisory Council of the world’s leading textile-care fair have voted to cancel Texcare International for this year because its success can no longer be guaranteed.

  • Leading suppliers of textile-care technology cancel their participation

Leading suppliers of laundry and dry-cleaning technology have used the free cancellation deadline offered by Messe Frankfurt against the background of the pandemic and cancelled their participation in Texcare International 2021 shortly before expiry. In view of this the Advisory Council of the world’s leading textile-care fair have voted to cancel Texcare International for this year because its success can no longer be guaranteed.

In view of the corona crisis earlier this year, Messe Frankfurt offered exhibitors of Texcare International the right to cancel their participation free of charge until 3 September 2021. As the months passed, the overall outlook became increasingly positive and, by the beginning of August, around 200 companies – including the important and big manufacturers from all parts of the textile-care sector – had registered to exhibit at Texcare International in Frankfurt am Main from 27 November to 1 December 2021. Factors contributing to this included the growing pace of vaccination around the world, the categorisation of trade fairs as business events and the officially approved protection and hygiene concept of Messe Frankfurt. Nevertheless, the mood changed shortly before the cancellation deadline as leading companies decided to withdraw from the event because of uncertainties regarding the future development of the pandemic.

Kerstin Horaczek, Vice President Technology Shows at Messe Frankfurt, took stock after the deadline: “Together with our partners, we worked untiringly to stage the Texcare International for the textile-care sector in the autumn. However, a leading international trade fair with a significantly reduced spectrum on show would not do justice to participants’ expectations of the fair as the most important meeting place and innovation hub for the sector. Therefore, we have decided to accept the vote of the Advisory Council and cancel Texcare International 2021. We are extremely sorry about this. At the same time, we are grateful for the on-going, high level of commitment demonstrated by the sector for their most important trade fair.”

Source:

Messe Frankfurt Exhibition GmbH

Rieter CAMPUS – Foundation Stone Laid (c) Rieter
Rieter Campus Winterthur
09.09.2021

Rieter CAMPUS – Foundation Stone Laid

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

With a floor area of over 30 000 m2, the Rieter CAMPUS offers space for around   700 ultra-modern workplaces. For this purpose, Rieter and a specialist in office architecture have developed a contemporary space concept for the “Open Space Office” that is tailored to the needs of the company, divided into meeting rooms, focus rooms and some individual offices. The underground car park provides   88 parking spaces, and a further 12 outdoor parking spaces are being created   in front of the technology center.  “In the course of its 225-year company history, Rieter has helped shape the city of Winterthur. The foundation for the future as a leading technology company is now being created with the new CAMPUS. In this way, Rieter is giving a clear indication   of its commitment to the Winterthur site and to Switzerland as a business location”, commented Bernhard Jucker, Chairman of the Board of Directors of Rieter Holding AG.

Innovation is an important part of Rieter’s strategy and crucial for the company’s success. For this reason, Rieter invests more than CHF 50 million annually in research and development. Thanks to this commitment, Rieter is making a   decisive contribution to the further development of systems for sustainable yarn production and their digitization. The Rieter CAMPUS will provide an attractive working environment that promotes creativity and innovation.  The new CAMPUS is a showcase project in terms of economic feasibility, energy efficiency and sustainability. Rieter relies on renewable energy for construction. This includes heat generation via geothermal probes and a photovoltaic system on around 1 300 m2 of roof area. “In this way, the entrepreneurial focus on sustainable and energy-efficient solutions for yarn production is reflected in the overall concept of the CAMPUS,” emphasized Rieter CEO Norbert Klapper.  The move into the new building is planned for 2024.

Source:

Rieter Management AG

07.09.2021

International Conference on Cellulose Fibres 2022: Call for Abstracts

  • The success story of cellulose fibres continues - plastic bans drive innovation – 300 participants and 30 exhibitors are expected in-person and online
  • 2-3 February, Cologne (Germany), hybrid event

Cellulose fibres are among the winners of the European 'Single-Use Plastics Directive (SUPD)', which has been in effect since July 2021 and entails plastic bans for a variety of single-use products. Cellulose is the main component of plant cell walls and a natural polymer. As a result, disposable products made of cellulose and cellulose fibres are not labelled as plastic and are explicitly excluded from the regulation. The success story of cellulose fibres will thus continue at a rapid pace with new developments and applications.

  • The success story of cellulose fibres continues - plastic bans drive innovation – 300 participants and 30 exhibitors are expected in-person and online
  • 2-3 February, Cologne (Germany), hybrid event

Cellulose fibres are among the winners of the European 'Single-Use Plastics Directive (SUPD)', which has been in effect since July 2021 and entails plastic bans for a variety of single-use products. Cellulose is the main component of plant cell walls and a natural polymer. As a result, disposable products made of cellulose and cellulose fibres are not labelled as plastic and are explicitly excluded from the regulation. The success story of cellulose fibres will thus continue at a rapid pace with new developments and applications. Building on the success of this year's conference with 200 participants, the International Conference on Cellulose Fibres 2022 will again cover the entire value chain, from lignocellulose, chemical pulp, cellulose fibres such as rayon, viscose, modal or lyocell and new developments to a wide range of applications: Textiles of all kinds, nonwovens such as wet wipes and new areas such as composites or nanocellulose in the food industry. All these sectors have gained considerable momentum in recent years.

Cellulose fibres have been a success story within the textile market with a compound annual growth rate (CAGR) between 5 and 10 % over the last ten years and similar growth rates are expected in the coming decade. This makes cellulosic fibres the fastest growing fibre group in the textile industry and also the largest investment sector in the global bioeconomy.  The challenge now is to achieve a balance between the ongoing capacity expansion and the growing demand, to avoid overcapacity while still meeting rising demand from the major brands. These high growth rates are driven by the increased demand for natural fibres (and bottlenecks in cotton production), the microplastic issues, and bans on plastics in disposable applications. All three factors will continue to play an important role in the development of the sector in the future.

Focus of the conference

  • Impact of plastic-bans on single-use products
  • Transformation from fossil to renewable raw materials
  • Challenges in developing new value chains
  • Alternative raw materials for cellulose fibres
  • Latest technology and market trends
  • Market dynamics and stakeholders in the cellulose sector
  • New ecosystems and partnerships
  • Development of political environment
  • Improvement of sustainability in production

Companies are now invited to submit presentations as well as their latest developments for the Innovation Award.

Call for Abstracts and Posters
Abstract submission is open now. Latest products, technologies, developments or market trends are welcome.
Deadline for submission: 15 October 2021

 

Source:

nova Institute

Iluna Group with sustainable Collection at Interfilière Paris (c) Iluna Group
03.09.2021

Iluna Group with sustainable Collection at Interfilière Paris

As the role of lingerie in fashion and athleisure continues to augment, the desire for garments that will meet a new set of values for contemporary consumer lifestyles will flourish. Iluna Group comes back to Interfilière Paris with an important goal: to relaunch the qualities and dimensions of sustainability.

Iluna’s new path begins with the investment in the renewal of machines, which allow it to fly higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

As the role of lingerie in fashion and athleisure continues to augment, the desire for garments that will meet a new set of values for contemporary consumer lifestyles will flourish. Iluna Group comes back to Interfilière Paris with an important goal: to relaunch the qualities and dimensions of sustainability.

Iluna’s new path begins with the investment in the renewal of machines, which allow it to fly higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

The printing processes are also born from this constant search for innovation towards new materials and new techniques, becoming more and more sustainable: Global Recycle Standard (GRS)-certified sublimation printing and register printing carrying Global Organic Textile Standard (GOTS) certification.

Source:

Iluna Group / GB Network

Zünd: Automatic production monitoring for cutting with Zünd Connect (c) Zünd Systemtechnik AG
02.09.2021

Zünd: Automatic production monitoring for cutting with Zünd Connect

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

The web-based monitoring tool gives the user access to cutter- performance data at a glance, any time of day. Reliable key performance indicators are available at all times to help users maximize productivity. The system records productivity levels over a freely definable period using Zünd Cut Center – ZCC (Version 3.4 or later) as data source. Data monitoring provides information users need in order to make informed decisions. This comprehensive overview of production data reveals connections that are often overlooked. Zünd Connect supplies valuable key performance indicators for assessing how efficiently cutting systems are working. To be able to improve cutter efficiency, potential areas of improvement must be uncovered and recognized. This potential lies primarily in the technology but also in the way it is being used.

Zünd Connect is available in a "Monitor" or an "Analyzer" version.

Source:

Zünd Systemtechnik AG 

(c) Riri Group
Stones & Gold
01.09.2021

Riri Group’s FW 2022-23 collection: Creativity, innovation, sustainability

The Swiss group presents three creative inspirations to explore new shapes, colors, materials and define a new offer featuring a variety of solutions and ideas.
A tribute to health and to balance with nature, to the advanced goldsmith craftsmanship and to the effortless sophistication of industrial luxury: the FW 2022-23 collection by Riri Group is a true kaleidoscope of shapes, colors and materials, where three different creative inspirations meet – Biophilic, Stones&Gold and Industrial Luxe – for a high-end line of accessories.

All three paths are the result of state-of-the-art techniques, of an R&D effort and of the renowned expertise of the Swiss group. Part of the offer is also a selection of pieces by Cobrax Metal Hub, among which stand out buckles and locks with peculiar shapes and finishing.

The Swiss group presents three creative inspirations to explore new shapes, colors, materials and define a new offer featuring a variety of solutions and ideas.
A tribute to health and to balance with nature, to the advanced goldsmith craftsmanship and to the effortless sophistication of industrial luxury: the FW 2022-23 collection by Riri Group is a true kaleidoscope of shapes, colors and materials, where three different creative inspirations meet – Biophilic, Stones&Gold and Industrial Luxe – for a high-end line of accessories.

All three paths are the result of state-of-the-art techniques, of an R&D effort and of the renowned expertise of the Swiss group. Part of the offer is also a selection of pieces by Cobrax Metal Hub, among which stand out buckles and locks with peculiar shapes and finishing.

Looking to the new season with a positive and enthusiastic attitude, the Group continues to work towards an increasing sustainability when it comes to products and processes. The collection, in fact, is a further step toward Riri’s path of green responsibility that the company has taken to bring actual improvement in its sustainable performance. This year, Riri Group published its first Sustainability Report, calculated in compliance with Global Reporting Initiative Standard (GRI), and adopted recycled polyester as production standard for zips’ tapes.

Biophilic
A way to honor love for life, this line emphasizes the importance of physical and mental wellbeing, answering the questions raised during the challenges faced in the last year. Balance with nature becomes a concrete product circularity operation resorting to manufacturing processes with a low environmental impact and to organic and biodegradable materials. Among them stands out recycled polyester for zips which is Global Recycled Standard (GRS) certified, Global Organic Textile Standard certified organic cotton and other alternative fibers, such as nettle, a natural resource that is a great alternative to synthetic fibers. Rivets, zips, buttons and metal components are made of stainless steel, which guarantees durability and resistance, 100% recycled copper and aluminum – light, ductile and resistant to oxidation. Among the most interesting solutions are rice peel powder – used on buttons’ overseals – and eco-sustainable thermoplastic polyurethane, obtained from renewable raw sources.

Stones & Gold
Sophistication and advanced craftsmanship mark the pieces of this creative path which, inspired by goldsmith and glyptic craft tradition, reveals a delicate sense of positivity and richness. Gems, lapis lazuli, marble, and mother-of-pearl are protagonists of a refined selection of accessories designed to amaze and catch the eye, resembling actual jewels. Essential the use of gold, especially in its liquid form: dominating zips and buttons’ finishes, this precious and versatile metal becomes a decorative feature on printed tape.

Industrial luxe
The third proposal embodies the unique style and timeless elegance that have always defined Riri’s products, embellishing them with new engineering details which makes them very relevant. The accessories come with golden and black finishes, both glossy and matt, and explore shapes developed to bring life to a range of luxury accessories with a sophisticated industrial aesthetics. A dominating role goes to stainless steel, along with a selection of impactful and elegant tapes which includes jacquard options, for a retro-futuristic look that is revealed also through the use of mechanical elements, such as screws and etched metal sheets, and in the clean and boxy shapes of pullers and buttons.

Source:

Menabò Group for Riri Group

01.09.2021

International Conference on Cellulose Fibres 2022: Plastic bans drive innovation

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online – Call for Abstracts and Posters – 300 participants and 30 exhibitors are expected

Cellulose fibres are among the winners of the European 'Single-Use Plastics Directive (SUPD)', which has been in effect since July 2021 and entails plastic bans for a variety of single-use products. Cellulose is the main component of plant cell walls and a natural polymer. As a result, disposable products made of cellulose and cellulose fibres are not labelled as plastic and are explicitly excluded from the regulation. The success story of cellulose fibres will thus continue at a rapid pace with new developments and applications.

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online – Call for Abstracts and Posters – 300 participants and 30 exhibitors are expected

Cellulose fibres are among the winners of the European 'Single-Use Plastics Directive (SUPD)', which has been in effect since July 2021 and entails plastic bans for a variety of single-use products. Cellulose is the main component of plant cell walls and a natural polymer. As a result, disposable products made of cellulose and cellulose fibres are not labelled as plastic and are explicitly excluded from the regulation. The success story of cellulose fibres will thus continue at a rapid pace with new developments and applications.

Building on the success of this year's conference with 200 participants, the International Conference on Cellulose Fibres 2022 will again cover the entire value chain, from lignocellulose, chemical pulp, cellulose fibres such as rayon, viscose, modal or lyocell and new developments to a wide range of applications: Textiles of all kinds, nonwovens such as wet wipes and new areas such as composites or nanocellulose in the food industry. All these sectors have gained considerable momentum in recent years.

Cellulose fibres have been a success story within the textile market with a compound annual growth rate (CAGR) between 5 and 10 % over the last ten years and similar growth rates are expected in the coming decade. This makes cellulosic fibres the fastest growing fibre group in the textile industry and also the largest investment sector in the global bioeconomy. The challenge now is to achieve a balance between the ongoing capacity expansion and the growing demand, to avoid overcapacity while still meeting rising demand from the major brands. These high growth rates are driven by the increased demand for natural fibres (and bottlenecks in cotton production), the microplastic issues, and bans on plastics in disposable applications. All three factors will continue to play an important role in the development of the sector in the future.

Companies are now invited to submit presentations as well as their latest developments for the Innovation Award.

Main topics of the conference:

  • What is the impact of plastic bans on single-use products?
  • The avoidance of microplastics and the transformation from fossil to renewable raw materials?
  • What are the biggest challenges in developing new value chains and growing market demand?
  • Which alternative raw materials for cellulose fibres are suitable and available?
  • What are the latest technology and market trends?
  • What are the future market dynamics? Who is active and interested in the cellulose fibre sector?
  • What ecosystems and partnerships are needed to promote innovation in line with new market requirements?
  • How will the political environment develop in the future?
  • How can the sustainability of cellulose fibre production be further improved?

 
Call for Abstracts
Abstract submission is open now. You are welcome to present your latest products, technologies, developments or market trends. Submit your abstract as soon as possible.
Deadline for submission: 15 October 2021
https://cellulose-fibres.eu/call-for-abstracts

Call for Posters
Deadline for submission: 31 December 2021
https://cellulose-fibres.eu/call-for-posters

Call for Innovations
More information about the innovation award and the application can be found at
Deadline for submission: 15 November 2021
https://cellulose-fibres.eu/award-application

Sponsoring Opportunities: https://cellulose-fibres.eu/sponsoring

Source:

nova Institute