Search

Browse all sections

From the Sector

391 results

24.05.2023

Way2ITMA: Recycling technologies offered by VDMA members

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

Recycling of textile production waste and textiles
Recycling of caustic soda and waste heat
Processing of recycled materials

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

Recycling of textile production waste and textiles
Recycling of caustic soda and waste heat
Processing of recycled materials

More information:
VDMA ITMA 2023 ITMA Recycling raw materials

Source:

VDMA e.V.

(c) INDA

10.05.2023

Four Nonwoven Industry Professionals honored with INDA Lifetime Awards

NDA, the Association of the Nonwoven Fabrics Industry, announced four recipients for the Lifetime Service Award and Lifetime Technical Achievement Awards. Jan O’Regan, Seshadri Ramkumar, Jim Robinson, and Ed Thomas are being recognized for their key contributions to the growth of the nonwovens industry and INDA.

NDA, the Association of the Nonwoven Fabrics Industry, announced four recipients for the Lifetime Service Award and Lifetime Technical Achievement Awards. Jan O’Regan, Seshadri Ramkumar, Jim Robinson, and Ed Thomas are being recognized for their key contributions to the growth of the nonwovens industry and INDA.

Jan O’Regan: INDA Lifetime Service Award
Jan O’Regan was the Director, Strategic Initiatives and Nonwovens Marketing, for Cotton Incorporated and retired in 2022. In this capacity, she uncovered new opportunities for cotton to bring value into the nonwovens industry. Her work included leading efforts in strategic planning, technical and market project management, and sharing new ideas and results with the global supply chain.
O’Regan spent over four decades in the nonwovens industry in various roles, including sales, marketing, strategic planning and business management. Market responsibilities included consumer and industrial markets on regional, national, and global teams. Over the most recent years, she applied these broad experiences to new markets for cotton in nontraditional applications.
Serving and volunteering with INDA for decades, O’Regan most recently chaired the World of Wipes® committee, which she efficiently organized to produce innovative conferences for the wipes industry. She was a frequent speaker at INDA, INSIGHT, EDANA, and other events, and for nearly two decades was a go to source of information for cotton fibers in nonwovens and hygiene. O’Regan earned a BS in Textiles and Business, summa cum laude, from Penn State University and an MBA from New York University’s Stern School of Business.

Seshadri Ramkumar: INDA Lifetime Technical Achievement Award
Seshadri Ramkumar has over twenty-five years of experience within the technical nonwovens space, conducting industry leading research and educating nonwovens professionals at Texas Tech University (TTU). At TTU, he established the Nonwovens Laboratory. Many of Ramkumar’s students have gone on to become technical leaders within their organizations and the nonwovens industry.
Ramkumar has numerous patent and invention disclosures, including Fibertect® toxic chemical decontamination wipes which have been recognized by the American Chemical Society as a notable success of federally supported innovation, endorsed by Lawrence Livermore National Laboratory, and adopted by multiple branches of the military.
In addition to many peer-reviewed publications, articles, and columns collectively over 500, including one on nanofibers that has been cited over 2,100 times, Ramkumar has contributed his expertise on the editorial boards of multiple fiber, nonwoven, and textile journals. Ramkumar has also organized conferences for nonwovens and textiles and actively promoted INDA and its technical training offerings for over 20 years.
He is a longtime member of the INDA Technical Advisory Board, been recognized by TAPPI, Society of Dyers and Colorists (UK), the Textile Institute (UK), and the Textile Association (INDIA), and received numerous awards from TTU.
Ramkumar holds a Bachelors of Technology (Textiles), Graduated with Distinction, and a Masters of Technology (Textiles), University First Rank in the Discipline, Anna University, and a Ph.D. (Textile Materials) from the University of Leeds, UK.

Jim Robinson: INDA Lifetime Technical Achievement Award
Jim Robinson has 33 years in the absorbent hygiene industry, including 28 years as a Technical Service Manager at BASF. He led technical teams that focused on the application of superabsorbent polymers (SAP) in hygiene products. Robinson has extensive knowledge of SAP applications, absorbent core formation, and hygiene article design, performance and testing. While with BASF, Robinson led efforts with multiple external companies to provide co-supplier solutions to hygiene converters.
Robinson’s extensive understanding of test methods and test method development led to his coordinating the establishment of fitness for use standards of adult incontinent products with the National Association for Continence and involvement in development and review of absorbent product test methods with INDA/EDANA. He is also an active contributor to INDA’s Technical Advisory Board and Hygienix organizing committee and was a contributing developer in establishing the INDA Absorbent Hygiene Training Course. Robinson has provided numerous presentations at INSIGHT, Hygienix, and RISE on performance and interactions of absorbent system components.
Recently, Robinson has been consulting and contributing to the success of multiple start-ups including those having been nominated for INDA product awards. Robinson has a BS in Chemistry from Hampden-Sydney College and an MS in Chemistry from Duke University.

Ed Thomas: INDA Lifetime Technical Achievement Award
Ed Thomas retired after 39 years, with 32 years in the nonwovens industry, and has remained active teaching the Intermediate Nonwovens Training Course for INDA and The Nonwovens Institute at North Carolina State University, as well as providing consulting services to the industry.
Thomas’ experience includes Process Engineering Manager and Plant Management, DuPont; Technical Director, Reemay; VP of Research and Operations, VP of Operations and Technology, and Global VP of Research and Development for Fiberweb/BBA Nonwovens; and Head of Research and Product Development, First Quality Nonwovens.
Thomas holds 10 U.S. nonwoven patents and he and his teams have been awarded more than 250 patents for numerous and diverse innovations that have played significant roles in the success of the nonwovens industry. These include applications for the global hygiene market, industrial nonwovens, and filtration media.
During his career, Thomas has presented several keynote addresses and papers to industry conferences, participated in North Carolina State University’s Nonwovens Cooperative Research Center (NCRC) prior to it becoming The Nonwovens Institute (NWI), INDA’s Technical Advisory Board, INDA’s Sustainability Committee, and was Vice Chair of NWI’s Industrial Advisory Board prior to retirement and remains an Emeritus member.
Thomas received his mechanical engineering degree from SUNY Buffalo.

More information:
INDA nonwovens Association of the Nonwoven Fabrics Industry Awards

Source:

INDA

(c) Mayer & Cie.

The Batliboi team at ITME 2022 along with several Mayer & Cie. colleagues

03.05.2023

New set-up of Mayer & Cie. representations in Nepal & Bangladesh

Since 1 April 2023 sales and service of Mayer & Cie. circular knitting machines in Bangladesh have been under new management. A new dynamic team “Mayer Bangladesh” has been formed. Mayer & Cie.’s longstanding Indian representative Batliboi has joined business activities in Bangladesh since the beginning of the month, supported by the team of Brady Services and by Almani Biz.

In Batliboi, Mayer & Cie. has set up a business partner of many decades standing as its representative in Bangladesh. For around 40 years Mumbai-based Batliboi has overseen sales and service of Mayer & Cie. circular knitting machines in India. Abhay Sidham heads Batliboi’s Textile and Machinery Group. He and his team have many years of experience in strategic marketing, and a focus on sustainability and processing recycled raw materials is part of Batliboi’s expertise.

Since 1 April 2023 sales and service of Mayer & Cie. circular knitting machines in Bangladesh have been under new management. A new dynamic team “Mayer Bangladesh” has been formed. Mayer & Cie.’s longstanding Indian representative Batliboi has joined business activities in Bangladesh since the beginning of the month, supported by the team of Brady Services and by Almani Biz.

In Batliboi, Mayer & Cie. has set up a business partner of many decades standing as its representative in Bangladesh. For around 40 years Mumbai-based Batliboi has overseen sales and service of Mayer & Cie. circular knitting machines in India. Abhay Sidham heads Batliboi’s Textile and Machinery Group. He and his team have many years of experience in strategic marketing, and a focus on sustainability and processing recycled raw materials is part of Batliboi’s expertise.

These competences are of relevance in the Bangladesh market because “we face strong competition from Asian manufacturers here,” as Wolfgang Müller, Mayer & Cie.’s sales director, explains. The premium market was growing smaller, and the trend was toward specialities – value-added fabrics, spacer fabrics and athleisure with a high proportion of elastic. Mayer & Cie. sees in these requirements significant potential for its machines – and in Batliboi a partner able in view of its experience to put them to optimal use.

One building block in the set-up of Mayer & Cie. representatives is unchanged. Brady Services will continue with Batliboi to contribute its close ties with the local market. A significant number of existing companies will continue to be looked after by Brady Services.

The new member in Mayer Bangladesh team is Dhaka-based Almani Biz. A lubricants specialist for circular knitting machines Almani Biz has a wide network with Bangladesh knitting industry.

Mayer & Cie. feels well positioned by this new set-up. “We,” Wolfgang Müller says, “are of the opinion that the market for textile machinery in Bangladesh will continue to grow and we are confident that by strengthening our sales, service and marketing team we will be able to make good use of this opportunity.”

Customers in Bangladesh have placed large orders in the past. The latest, placed in January, was for several dozen machines to be delivered this autumn. Further orders from Apex and BEXIMCO (Bangladesh Export Import Company) are also scheduled for delivery in the second half of 2023.

While reorganising the set-up of its representatives in Bangladesh Batliboi has also taken over as Mayer & Cie.’s representative in Nepal, where the company had previously had no local representative. There is a demand for machines for interlock, 8-lock and single jersey, but sales are still in single figures.

More information:
Mayer & Cie circular knitting machines Bangladesh Nepal Batliboi Brady Services Almani Biz

Source:

Mayer & Cie.

03.05.2023

Lectra: Financial statements for Q1 2023

Revenues: 123.7 million euros (stable)*
EBITDA before non-recurring items: 19.7 million euros (-12%)*
Net income: 7.3 million euros (-21%)
Free cash flow before non-recurring items: 9.2 million euros
Revised 2023 outlook due to wait-and-see attitude of customers

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the unaudited consolidated financial statements for the first quarter of 2023. Comparisons between 2023 and 2022 are based on 2022 exchange rates unless otherwise stated (“like-for-like”). As the impact of the acquisition of TextileGenesis on the financial statements for 2023 is not material, like-for-like changes exclude only the variations in exchange rates.

See the attached document for more details about the financial statements.

Revenues: 123.7 million euros (stable)*
EBITDA before non-recurring items: 19.7 million euros (-12%)*
Net income: 7.3 million euros (-21%)
Free cash flow before non-recurring items: 9.2 million euros
Revised 2023 outlook due to wait-and-see attitude of customers

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the unaudited consolidated financial statements for the first quarter of 2023. Comparisons between 2023 and 2022 are based on 2022 exchange rates unless otherwise stated (“like-for-like”). As the impact of the acquisition of TextileGenesis on the financial statements for 2023 is not material, like-for-like changes exclude only the variations in exchange rates.

See the attached document for more details about the financial statements.

More information:
Industry 4.0, Lectra, Lectra Fashion PLM financial year 2023 Automotive furniture

Source:

Lectra

21.04.2023

REVECOL® by ERCA: Textile chemical auxiliaries obtained from vegetable oils

REVECOL® (Recycled Vegetable Cooking Oil) represents a new generation of textile chemical auxiliaries, which are high-performing and obtained from vegetable exhausted cooking oil.

Chemical auxiliaries play a crucial role in several stages of the textile production cycle, from material preparation to dyeing and finishing, but represent a complex challenge from the point of view of reducing environmental impact. Herein lies the revolutionary aspect of REVECOL® by ERCA: for the first time, not just one product, but a complete range of auxiliary chemicals is available that meets the criteria of circularity.

The result of ERCA's continuous research, REVECOL® are in fact born from critical waste materials (exhausted vegetable oils), which, thanks to an environmentally and safety-friendly manufacturing process, are transformed into a line of innovative chemical auxiliaries destined for the entire textile industry and its various applications: from underwear to home textiles.

REVECOL® (Recycled Vegetable Cooking Oil) represents a new generation of textile chemical auxiliaries, which are high-performing and obtained from vegetable exhausted cooking oil.

Chemical auxiliaries play a crucial role in several stages of the textile production cycle, from material preparation to dyeing and finishing, but represent a complex challenge from the point of view of reducing environmental impact. Herein lies the revolutionary aspect of REVECOL® by ERCA: for the first time, not just one product, but a complete range of auxiliary chemicals is available that meets the criteria of circularity.

The result of ERCA's continuous research, REVECOL® are in fact born from critical waste materials (exhausted vegetable oils), which, thanks to an environmentally and safety-friendly manufacturing process, are transformed into a line of innovative chemical auxiliaries destined for the entire textile industry and its various applications: from underwear to home textiles.

EVECOL® by ERCA has obtained several certifications – GRS, RCS, listed into ZDHC Chemical Gateway, bluesign® and GOTS, and are also finalizing the third-party certified PCF (Product Carbon Footprint), - as well as various international recognitions – first prize RESPONSIBLE CARE®, in Italy, from Federchimica, inclusion in the BAT (Best Available Techniques) document from the European Community.

More information:
REVECOL® ERCA textile chemical auxiliaries Textile Chemicals chemical auxiliaries

Source:

ERCA S.p.A

21.04.2023

Rieter: Annual General Meeting 2023

Shareholders Adopt All Motions Proposed by the Board of Directors

Distribution of a dividend of CHF 1.50 per share approved
Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
All members of the Board of Directors who stood for re-election were elected
Thomas Oetterli newly appointed to the Board of Directors
KPMG newly elected as statutory auditors
Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Shareholders Adopt All Motions Proposed by the Board of Directors

Distribution of a dividend of CHF 1.50 per share approved
Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
All members of the Board of Directors who stood for re-election were elected
Thomas Oetterli newly appointed to the Board of Directors
KPMG newly elected as statutory auditors
Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Annual Report, Financial Statements, Consolidated Financial Statements and Remuneration Report
The shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, financial and consolidated financial statements for 2022. Moreover, they formally approved the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

By way of a consultative vote, the shareholders also approved the Remuneration Report 2022.

Remuneration of the Members of the Board of Directors and the Group Executive Committee
In two separate binding votes, the proposed maximum total remuneration of the members of the Board of Directors and the Group Executive Committee for the 2024 financial year was approved.

Re-Election of the Members of the Board of Directors
The Chairman of the Board, Bernhard Jucker, and the Directors, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi, Sarah Kreienbühl and Daniel Grieder were confirmed for a further one-year term of office. In addition, Thomas Oetterli was newly elected to the Board of Directors for a term of office.

The members of the Remuneration Committee who were standing for election –
Hans-Peter Schwald, Bernhard Jucker and Sarah Kreienbühl – were likewise re-elected for a one-year term of office.

Election of KPMG as Statutory Auditors
The shareholders also adopted the proposal of the Board of Directors to elect KPMG AG, Zurich, as new statutory auditors for the financial year beginning January 1, 2023.

Amendments to the Articles of Association
The shareholders further approved the proposals of the Board of Directors to amend the Articles of Association of Rieter Holding Ltd., in order to implement the requirements of the reform of the Swiss company law, which came into force on January 1, 2023.

More information:
Rieter Rieter Holding Ltd. general meeting

Source:

Rieter Holding Ltd.

(c) Premium Exhibitions GmbH

19.04.2023

PREMIUM and SEEK redefine "trade fairs" - FEEL CONNECTED AGAIN

With its new Trend and Event Platform, the Premium Group presents a new concept for a progressive community. According to Premium Group classic trade fair formats are over - this summer it's all about (re)connection, real emotions and new perspectives. The emphasis lies on the most relevant trends and the power of networking, but in a more personalised and intimate way.

With its new Trend and Event Platform, the Premium Group presents a new concept for a progressive community. According to Premium Group classic trade fair formats are over - this summer it's all about (re)connection, real emotions and new perspectives. The emphasis lies on the most relevant trends and the power of networking, but in a more personalised and intimate way.

PREMIUM and SEEK are focusing on a more rigorous curation of promising brands and collections as well as various opportunities to connect. An extensive content programme of keynotes, round tables, live interviews, study presentations and panels on the most important trends will offer two diverse and time-efficient days. The areas of concentration encompass sustainability, technology, fashion, business, lifestyle, and beauty. The repertoire of topics include marketing themes such as LinkedIn and Tik Tok, new tech tools such as ChatGPT or Virtual Dressing as well as news from the metaverse. Sustainability topics such as denim, circularity, re-commerce, vintage and the new Green Deal laws will be discussed as well as cross-industry topics such as female empowerment, Gen Z and modern leadership.

PREMIUM marks the first event of the season for womenswear. New silhouettes, design trends, provocation and the current zeitgeist are brought to the forefront with a carefully curated selection of brands. The fashion scene and visitors can look forward to the best of denim, hyper-femininity, beauty, well-being, future Berlin icons and innovations from the tech and lifestyle sphere. New talents will also have the opportunity to pitch their labels to a professional audience. SEEK focuses on heritage, Y2K, modern sportswear, outdoor and sustainable brands, which will be shown in the CONSCIOUS CLUB. Other highlights will include talks and inspiring activations from the community.

"We listen, research and curate the most important trends for the industry. To do this, our team of experts travels across Europe and exchange ideas with representatives from the entire industry. The results of months of work can be discovered in two days," says Maren Wiebus, Creative Director of the Premium Group.

Today, attention is the most important currency for the fashion industry. This is also why, for the very first time ever, the Premium Group events will take place over only two days instead of three. At the same time, generally accepted norms and rules are questioned, taken apart, and put back together again. The organisers of Premium Group invite fashion professionals to discuss the rules and redefine them together.

The summer editions of PREMIUM and SEEK will take place on 11 and 12 July at the new old location Station-Berlin in the heart of Berlin.

More information:
Premium Group SEEK Berlin, Messe, Mode, Nachhaltigkeit

Source:

Premium Exhibitions GmbH

14.04.2023

Carbios presents its 2022 Annual Results

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

Project to build, in France, the world’s first PET biorecycling plant: Progress in line with 2025 unit commissioning target6
Excellent results from the demonstration plant validating the industrial scale-up of Carbios technology
Carbios licensing documentation ready for worldwide industrial and commercial deployment
Long-term exclusive strategic partnership with Novozymes to ensure supply of enzymes at industrial scale for the Reference Unit and all future licensee plants
Creation of fiber-to-fiber consortium with On, Patagonia, Puma, PVH Corp., and Salomon
CE-PET research project successfully completed
Participation in WhiteCycle project co-funded by Horizon Europe and coordinated by Michelin
Publication of scientific articles in the prestigious Biophysical Journal and in Chemical Reviews
Carbios hosts world’s first PET Biorecycling Summit
Carbios publishes first Sustainability Report and outlines objectives for environmental, social and governance (ESG) initiatives
Carbios joins Ellen MacArthur Foundation’s circular economy network
€30 million European Investment Bank loan drawn down in 2022
Group’s cash position of €101 million as of December 31, 2022

More information:
Carbios plastics life cycle Recycling

Source:

Carbios

12.04.2023

Comeback of CIOSH trade fair in Shanghai

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

Integrating Online and Offline Platforms
CIOSH 2023 encompasses four major sectors: Safety at Work, Security at Work, Health at Work, and Emergency Rescue Management. Renowned domestic and international exhibitors, including 3M, Honeywell, Ansell, SATA, JSP, MSA, DELTAPLUS, Lakeland, Cortina, UVEX, CM Chaomei, Xing Yu Gloves, DS, East Asia Glove, Hanvo, SOMO Zhongmai Safety, SAFETY-INXS, and TELPS, will assemble on site. At the same time, CIOSH 2023 has introduced an innovative online platform - CIOSH VIRTUAL. By offering online displays, live streaming, interactive features, and real-time communications, it breaks time and space constraints, facilitating exhibitors and visitors to continue their business exchanges and cooperations beyond the physical exhibition. So far, nearly 1,300 companies have joined the CIOSH VIRTUAL, showcasing more than 3,000 products online and attracting over 70,000 views.

CIOSH Industry Technical Seminar, Sustainable Development Emerges as the Key Focus
The annual Industry Technical Seminar, held concurrently with CIOSH, serves as a platform for professionals to discuss product solutions, share industry insights, and exchange ideas on relevant policies. In 2021, China integrated climate change mitigation measures into its 14th Five-Year Plan, established a 2030 carbon peaking action plan, and proactively pursued the goal of carbon neutrality by 2060. Under the development objectives of "carbon peaking" and "carbon neutrality," the sustainable development of the personal protective equipment (PPE) industry has become the primary theme of this year's seminar. Experts from China Carbon Low-carbon Certification (Jiangsu) Co., Ltd., China Certification Centre, Inc., and SGS-CSTC Standards Technical Services Co., Ltd., will examine related policies, the effects of "carbon neutrality" on the PPE industry chain and the industries using PPE from different angles. They will also explore the future direction of PPE and offer professional guidance for the transformation of relevant enterprises.

Fall Protection Zone
Falls from height are one of the most common accidents that cause serious injury or death to workers. Effective fall protection requires not only protective equipment, but also professional instructions and training. Therefore, CIOSH set up a new Fall Protection Zone in 2021, which received unanimous acclaim. CIOSH 2023 has continued to invite SKYLOTEC, rothoblaas, JECH, Mode and NTR Safety, five companies that specialize in protection at height, to conduct on-site demonstrations on fall testing, fall protection solutions and aerial rescue, and provide visitors with the most professional fall protection guidance and training.

Occupational Health
CIOSH has always implemented the strategy of expanding the business scope in a diversified way, which devotes itself to providing innovative opportunities and new driving forces for the sustainability of the occupational safety and health industry. This year, focusing on the "occupational health" sector, the exhibition will launch an Ergonomics Zone and an Exoskeleton Technology Zone for the first time.

More information:
China International Occupational Safety & Health Goods Expo CIOSH Messe Düsseldorf A+A work safety health and safety personal protective equipment Protective Textiles

Source:

Messe Düsseldorf GmbH

(c) M. Vorhof, ITM/TU Dresden

12.04.2023

ITM at JEC 2023

From April 25^th to 27^th, 2023, the Institute of Textile Machinery and High Performance Material Technology (ITM) of TU Dresden will be exhibiting at the pavilion SAXONY! at JEC World 2023.

The ITM will provide a comprehensive overview of its current research in the field of machine and product development along the entire textile process chain.

The upcoming JEC 2023 exhibition will highlight innovative Customised Connective Cores (CCC), which are custom-made core-insert structures additively manufactured using cellular metal and a form-fit integrated insert. These CCCs can be seamless integrated either as patches or as full-surface core material into lightweight panels, offering significantly improved load-bearing behavior (especially 4 times the load-bearing capacity and fail-safe behavior) compared to existing technologies. This breakthrough opens up new possibilities for fastening lightweight panels.

From April 25^th to 27^th, 2023, the Institute of Textile Machinery and High Performance Material Technology (ITM) of TU Dresden will be exhibiting at the pavilion SAXONY! at JEC World 2023.

The ITM will provide a comprehensive overview of its current research in the field of machine and product development along the entire textile process chain.

The upcoming JEC 2023 exhibition will highlight innovative Customised Connective Cores (CCC), which are custom-made core-insert structures additively manufactured using cellular metal and a form-fit integrated insert. These CCCs can be seamless integrated either as patches or as full-surface core material into lightweight panels, offering significantly improved load-bearing behavior (especially 4 times the load-bearing capacity and fail-safe behavior) compared to existing technologies. This breakthrough opens up new possibilities for fastening lightweight panels.

Another highlight at the exhibition is the repair process for fibre-reinforced composites (FRP) developed at the ITM. Instead of mechanically grinding the damaged area, the matrix in the repair area is locally dissolved using a UV-rays-induced depolymerisation process. Damaged fibres can thus be replaced by a customized repair patch. Free yarn ends on the textile repair patches are spliced with the UV-exposed yarn ends in the repair area using an adapted splicing process. In this way, a very clean, simplified and mechanically improved repair area can be achieved compared to the state of the art.

The diverse possibilities offered by the structure and process simulation of textile high-performance materials and textile manufacturing processes will also be presented. By means of multi-scale modelling and simulation, a profound understanding of materials and processes is achieved at the ITM. Finite element models on the micro, meso and macro scale have been developed and validated for this purpose. Examples from current ITM research projects demonstrate the various possibilities and areas of application of modern simulation methods in the field of textile technology.

Moreover, an innovative process for the integral manufacturing of 3D rib-stiffened preforms with complexly arranged stiffeners in 0°, 90° and ± 45° orientation was developed and successfully implemented at the ITM. Due to the process-integrated structure fixation and the continuous fibre reinforcement between shell and rib structure, the 3D preforms are perfectly suited for the production of highly load-bearing FRP components with increased bending stiffness, which will be exhibited at JEC. Hence, the lightweight construction potential of high-performance fibres can be fully exploited.

A successfully established development are partially flowable 2D textile reinforcement fabrics that are continuously manufactured in one single process step. For this purpose, the entire process chain was developed at the ITM, which allows a cost-effective and high-volume production of load-bearing thermoplastic 3D FRP components with continuous fibre reinforcement between shell and stiffeners.

At JEC 2023, the ITM will also present a partially embedded textile latice girder as reinforcement for carbon concrete applications, which was produced by means of an innovative textile manufacturing process based on the multiaxial warp knitting technology. Through the development of a customized warp insertion, manipulation and take-off system as well as appropriate shaping methods, it is now possible to produce tailored textile semi-finished products, e.g. for use in wall and ceiling panels. These textile latice girders represent a resource-saving alternative to conventional steel girders due to the reduced among of concrete required and the additional cavity for media and cable guidance.

The integration of textile actuators and sensors in FRP provides structures with additional functionalities. The research and application of such interactive FRP with different matrix materials (e.g. with thermoset, elastomer or concrete matrix systems) for structural health monitoring or adaptive systems is one of the key research areas of the ITM.

Moreover, the development and implementation of innovative yarn constructions based on recycled high-performance fibres (e.g. rCF, rGF, rAR) for sustainable FRPs is successfully promoted at ITM. By use of a special carding machine, recycled fibres are opened up, separated and joined to form a wide, uniform ribbon. Subsequently, innovative hybrid yarn constructions made of evenly mixed recycled high-performance and thermoplastic fibres with variable fibre volume fractions can be manufactured by means of various spinning technologies. Selected yarn constructions and components will be showcased at JEC.

More information:
ITM TU Dresden JEC World

(c) SHIMA SEIKI MFG., LTD.

Yarnbank

05.04.2023

SHIMA SEIKI at SPINEXPO 40th Session Shanghai

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HONG KONG) LTD., will participate in the 40th Session of SPINEXPO in Shanghai, China from 12th - 14th April 2023.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HONG KONG) LTD., will participate in the 40th Session of SPINEXPO in Shanghai, China from 12th - 14th April 2023.

At SPINEXPO, SHIMA SEIKI will offer visitors a choice between its "SDS®-ONE APEX4" apparel design system and its "APEXFiz®" subscription-based design software. Whereas SDS®-ONE APEX4 is offered as an all-in-one proprietary hardware + software package, APEXFiz® is subscription-based design software that can be installed on customers' individual computers. Both SDS®-ONE APEX4 and APEXFiz® software support the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. When a design is approved for production, knitting data is automatically generated for converting to machine data, allowing smooth communication for digitally bridging the gap between studio and factory. APEXFiz® thereby helps to realize sustainability while digitally transforming the fashion supply chain.

Also on display at SPINEXPO will be SHIMA SEIKI's "yarnbank®," an online web service for searching and viewing the latest yarns, developed with cooperation from yarn companies from around the world. Registered users can download yarn data for free, for use in fabric simulation and virtual sampling on APEXFiz®, avoiding the need to scan yarn on their own. By using yarn that is used in actual production, designers and apparel companies can furthermore rest assured that the simulations created using yarn from yarnbank® are not merely realistic images but accurate representations using yarn that can actually be purchased and used in production. With yarnbank®, the entire supply chain from yarn companies and apparel companies to knit manufacturers can be connected digitally.

SHIMA SEIKI will also display the latest collection of its knit samples, including WHOLEGARMENT® knitwear that is knit in its entirety on the machine without the need for linking or sewing afterward. Together with virtual sampling performed on APEXFiz®, WHOLEGARMENT® offers smart production for realizing a sustainable fashion supply chain.

More information:
Shima Seiki SPINEXPO knitting machines flat knitting machine Yarns

Source:

SHIMA SEIKI MFG., LTD.

05.04.2023

MUNICH FABRIC START, BLUEZONE & VIEW moved to July

With a current booking level of almost 90% for the international fabric trade show MUNICH FABRIC START, KEYHOUSE, THE SOURCE and BLUEZONE, Munich Fabric Start Exhibitions GmbH is starting the new season for Autumn.Winter 24/25 on a strong footing. From the organisers' point of view, the main reason for the high level of acceptance is the rebalancing of the July dates.

The international fabric trade show MUNICH FABRIC START (18 to 20 July), the innovation hub KEYHOUSE, theb one-stop sourcing platform THE SOURCE and the international denim trade show BLUEZONE (18 and 19 July) will move ahead and at the same time increase their relevance in the international trade show scene. For a large part of the visitors, the earlier date is closer to the collection rhythms and offers more time for further developments.

With a current booking level of almost 90% for the international fabric trade show MUNICH FABRIC START, KEYHOUSE, THE SOURCE and BLUEZONE, Munich Fabric Start Exhibitions GmbH is starting the new season for Autumn.Winter 24/25 on a strong footing. From the organisers' point of view, the main reason for the high level of acceptance is the rebalancing of the July dates.

The international fabric trade show MUNICH FABRIC START (18 to 20 July), the innovation hub KEYHOUSE, theb one-stop sourcing platform THE SOURCE and the international denim trade show BLUEZONE (18 and 19 July) will move ahead and at the same time increase their relevance in the international trade show scene. For a large part of the visitors, the earlier date is closer to the collection rhythms and offers more time for further developments.

What's new?
Due to the early date of MUNICH FABRIC START and BLUEZONE, the Munich trade show duo with KEYHOUSE and THE SOURCE formats will function even more strongly as an impulse generator and leading international event. The Munich location will also be strengthened by the relocation of the DMI Fashion Day from Düsseldorf to the Bavarian capital. The first DMI FASHION DAY LIVE will take place the day before the next MUNICH FABRIC START at the MOC.

The course will also be set anew in September: The date, which remains important for the industry, will in future be occupied by reVIEW - the new format of the VIEW PREMIUM SELECTION for follow-ups and trends as well as new market developments. On an area of around 2,500 square metres, the first reVIEW Autumn.Winter 24/25 will be held on 13 and 14 September 2023 on the Zenith grounds in Motorworld.

More information:
MUNICH FABRIC START BLUEZONE VIEW Premium Selection KEYHOUSE Denim

Source:

MUNICHFABRICSTART Exhibitions GmbH

31.03.2023

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman David Poston delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 19th Annual Meeting on March 30.

Mr. Poston’s speech highlighted the impacts of macroeconomic factors on the U.S. textile industry and the resilience of the U.S. textile industry; trade and investment data showing growth in the sector across the board; and NCTO’s policy priorities for domestic textile manufacturers.

“The U.S. textile and apparel industry faced challenging macroeconomic conditions throughout the year,” Poston states in the speech. “Despite these challenges, there were also many positive trends that helped offset some of those pressures, including softening inflation towards the latter half of the year, coupled with a surge in onshoring and nearshoring that led to historic investments, commitments and expansion in the U.S. and the Western Hemisphere.”

Click here for his full remarks.

National Council of Textile Organizations (NCTO) Chairman David Poston delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 19th Annual Meeting on March 30.

Mr. Poston’s speech highlighted the impacts of macroeconomic factors on the U.S. textile industry and the resilience of the U.S. textile industry; trade and investment data showing growth in the sector across the board; and NCTO’s policy priorities for domestic textile manufacturers.

“The U.S. textile and apparel industry faced challenging macroeconomic conditions throughout the year,” Poston states in the speech. “Despite these challenges, there were also many positive trends that helped offset some of those pressures, including softening inflation towards the latter half of the year, coupled with a surge in onshoring and nearshoring that led to historic investments, commitments and expansion in the U.S. and the Western Hemisphere.”

Click here for his full remarks.

More information:
NCTO National Council of Textile Organizations U.S. textile industry

Source:

NCTO

24.03.2023

Carbios: Scientific publication on enzymatic degradation of plastics

Carbios announces the publication of an article entitled “Enzymes’ power for plastics degradation” in Chemical Reviews. The article is a comprehensive and critical review of research published to date on the enzymatic degradation of all types of plastics (PET, PLA, polyolefins, polyurethanes, polyamides) and includes almost 700 references. Co-authored by biotechnology researchers from Carbios and its academic partner Toulouse Biotechnology Institute (TBI), as well as two eminent professors in polymer science from the University of Bordeaux, the work brings together expertise in the fields of enzymology, polymer science and industry in order to accelerate the transition to a circular economy for plastic.

Beyond the comprehensive bibliographical study, the authors analyzed the data to discuss the scope, limitations, challenges and opportunities of enzymatic plastic recycling with a view to developing innovations and industrial processes. The article’s standpoint and added value with regard to issues surrounding plastic pollution is its critical view on technology transfer and industrial scalability.

Carbios announces the publication of an article entitled “Enzymes’ power for plastics degradation” in Chemical Reviews. The article is a comprehensive and critical review of research published to date on the enzymatic degradation of all types of plastics (PET, PLA, polyolefins, polyurethanes, polyamides) and includes almost 700 references. Co-authored by biotechnology researchers from Carbios and its academic partner Toulouse Biotechnology Institute (TBI), as well as two eminent professors in polymer science from the University of Bordeaux, the work brings together expertise in the fields of enzymology, polymer science and industry in order to accelerate the transition to a circular economy for plastic.

Beyond the comprehensive bibliographical study, the authors analyzed the data to discuss the scope, limitations, challenges and opportunities of enzymatic plastic recycling with a view to developing innovations and industrial processes. The article’s standpoint and added value with regard to issues surrounding plastic pollution is its critical view on technology transfer and industrial scalability.

To read the article in Chemical Reviews, click here.

More information:
Carbios plastics enzymatic Chemical Reviews

Source:

Carbios

24.03.2023

adidas: FY Results of 2022 and Outlook for 2023

Major developments FY 2022

Currency-neutral revenues up 1% reflecting growth in all markets except Greater China
Double-digit increases in North America and Latin America, EMEA up high single digits
Gross margin declines to 47.3% due to strong increase in supply chain costs and discounting
Operating profit at € 669 million, including one-off costs of € 312 million
Operating margin decreases to 3.0%
Net income (continuing operations) of € 254 million includes € 350 million one-off costs
Executive and Supervisory Boards propose dividend of € 0.70 per share

Major developments Q4 2022

Major developments FY 2022

Currency-neutral revenues up 1% reflecting growth in all markets except Greater China
Double-digit increases in North America and Latin America, EMEA up high single digits
Gross margin declines to 47.3% due to strong increase in supply chain costs and discounting
Operating profit at € 669 million, including one-off costs of € 312 million
Operating margin decreases to 3.0%
Net income (continuing operations) of € 254 million includes € 350 million one-off costs
Executive and Supervisory Boards propose dividend of € 0.70 per share

Major developments Q4 2022

Currency-neutral revenues decline 1% impacted by termination of Yeezy partnership
Gross margin at 39.1% reflecting increased supply chain costs and higher discounting
Operating loss of € 724 million
Net loss from continuing operations of € 482 million

Outlook for 2023
Underlying operating profit expected to be around break-even level
In 2023, adidas expects currency-neutral revenues to decline at a high-single-digit rate as macroeconomic challenges and geopolitical tensions persist. Elevated recession risks in Europe and North America as well as uncertainty around the recovery in Greater China continue to exist. The company’s revenue development will also be impacted by the initiatives to significantly reduce high inventory levels. In addition, while the company continues to review future options for the utilization of its Yeezy inventory, the guidance already reflects the revenue loss of around € 1.2 billion from potentially not selling the existing stock. Accounting for the corresponding negative operating profit impact of around € 500 million, the company’s underlying operating profit is projected to be around the break-even level in 2023.

Reported operating loss of € 700 million projected
Should the company irrevocably decide not to repurpose any of the existing Yeezy product going forward, this would result in the potential write-off of the existing Yeezy inventory and would lower the company’s operating profit by an additional € 500 million this year. In addition, adidas expects one-off costs of up to € 200 million in 2023. These costs are part of a strategic review the company is currently conducting aimed at reigniting profitable growth as of 2024. If all these effects were to materialize, the company expects to report an operating loss of € 700 million in 2023.

More information:
adidas financial year 2022 financial year 2023 Sportswear

Source:

adidas AG

24.03.2023

Autoneum: All proposals approved at Annual General Meeting 2023

At the Annual General Meeting of Autoneum Holding Ltd on 24th March 2023, a clear majority of the shareholders approved the introduction of a capital band in the amount of approximately CHF 100 million net proceeds to finance the acquisition of Borgers Automotive. The proposal to waive the payment of a dividend for the 2022 financial year in view of the lower net result was also approved. In addition, Board member Rainer Schmückle as well as CEO Matthias Holzammer were given a farewell.

221 shareholders attended today’s Annual General Meeting of Autoneum Holding Ltd in Winterthur. 66.48 percent of the share capital was represented.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements for 2022. The proposal of the Board of Directors to waive the payment of a dividend for the financial year 2022 due to the lower net result was also approved by the Annual General Meeting.

In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Group Executive Board and the Board of Directors by a large majority of votes.

At the Annual General Meeting of Autoneum Holding Ltd on 24th March 2023, a clear majority of the shareholders approved the introduction of a capital band in the amount of approximately CHF 100 million net proceeds to finance the acquisition of Borgers Automotive. The proposal to waive the payment of a dividend for the 2022 financial year in view of the lower net result was also approved. In addition, Board member Rainer Schmückle as well as CEO Matthias Holzammer were given a farewell.

221 shareholders attended today’s Annual General Meeting of Autoneum Holding Ltd in Winterthur. 66.48 percent of the share capital was represented.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements for 2022. The proposal of the Board of Directors to waive the payment of a dividend for the financial year 2022 due to the lower net result was also approved by the Annual General Meeting.

In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Group Executive Board and the Board of Directors by a large majority of votes.

Chairman Hans-Peter Schwald and the other members of the Board of Directors Liane Hirner, Norbert Indlekofer, Michael Pieper, Oliver Streuli and Ferdinand Stutz were confirmed in office for another year. Hans-Peter Schwald, Norbert Indlekofer, Ferdinand Stutz and Oliver Streuli were re-elected to the Compensation Committee.

The consultative vote on the 2022 remuneration report was approved by 85.55%. The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2023 financial year as well as the other proposals were also approved by a large majority.

With 99.03%, a clear majority of the shareholders approved a capital band authorizing a capital increase of approximately CHF 100 million net proceeds. The purpose of the capital increase is to partially finance the acquisition of the automotive business of the Borgers Group announced by Autoneum on January 9, 2023. The Annual General Meeting also approved the other proposals of the Board of Directors for partial amendments to the Articles of Association.

Rainer Schmückle did not stand for re-election. He had been Vice Chairman of the Board of Directors, Chairman of the Audit Committee and member of the Strategy and Sustainability Committee since Autoneum became independent in 2011. CEO Matthias Holzammer, who will leave Autoneum for family reasons, was also bid farewell.

At the same time, Hans-Peter Schwald welcomed the new CEO Eelco Spoelder, who will take over the management of the Group from Matthias Holzammer on March 27, 2023: "With Eelco Spoelder, Autoneum gains an accomplished leader with many years of experience in the automotive supply industry. At Faurecia and previously at Continental, Mr. Spoelder has successfully proven that he can ensure strategic continuity and operational excellence even in a difficult market environment. I and the other members of the Board of Directors warmly welcome Eelco Spoelder and look forward to our future cooperation."

More information:
Autoneum general meeting CEO acoustic Automotive

Source:

Autoneum Holding AG

(c) IFCO

10.03.2023

Successful third edition of Istanbul Fashion Connection

The third edition of IFCO Istanbul Fashion Connection took place from 8 to 11 February 2023. At the largest IFCO to date, 588 exhibitors in a total of 9 halls at the Istanbul Expo Center met more than 10,000 international trade visitors from 134 countries such as Brazil, Canada, Chile, Colombia, Germany, Malaysia, Mexico, Nigeria, Panama, Saudi Arabia, South Africa, South Korea, Thailand, UK, United Arab Emirates. 45% of the visitors were from 134 countries and 55% of visitors were domestic. The largest group of foreign visitors came from Asia (33%), Middle East (33%), Europe (19%) and Africa (13%).

Divided into clear cut exhibition segments on a total of 100,000 sqm of exhibition space brands and manufacturers showed the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and weddingwear, lingerie, hosiery, leather & furs.

The third edition of IFCO Istanbul Fashion Connection took place from 8 to 11 February 2023. At the largest IFCO to date, 588 exhibitors in a total of 9 halls at the Istanbul Expo Center met more than 10,000 international trade visitors from 134 countries such as Brazil, Canada, Chile, Colombia, Germany, Malaysia, Mexico, Nigeria, Panama, Saudi Arabia, South Africa, South Korea, Thailand, UK, United Arab Emirates. 45% of the visitors were from 134 countries and 55% of visitors were domestic. The largest group of foreign visitors came from Asia (33%), Middle East (33%), Europe (19%) and Africa (13%).

Divided into clear cut exhibition segments on a total of 100,000 sqm of exhibition space brands and manufacturers showed the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and weddingwear, lingerie, hosiery, leather & furs.

In the new high-quality designer area The CORE İSTANBUL, internationally renowned designers from Istanbul Fashion Week presented their exciting and creative designs.
“The Core is the premier platform that connects local fashion designers with the international fashion market. Our mission is to showcase the work of Istanbul´s talented designers who are dedicated to creating unique and innovative fashion designs while embracing conscious and sustainable practices.”, says Günes Güner, curator of The Core.

Even more design power was on display at the KOZA Design Competition for young fashion creators. IMA Istanbul Moda Akademisi was responsible for the design of the IMA LAB trend zone at IFCO. In the creative space, the trends and themes of the coming season were taken up and presented in a visually elaborate way. Euphoric Recall encompasses colourful, playful 70's vibes, Metasphere describes the return of glitter and metallic with a futuristic touch. The New Gen area featured pieces by up-and-coming designers of the next generation.

In two separate halls, LinExpo gave an overview of lingerie and hosiery. As a part of IFCO 145 manufacturers presented themselves here.

A large selection of high-quality bridal and evening dresses and suits were shown in the FashionIST area.

In the IFCO Sourcing area, especially designed for production, trade visitors networked directly with international production companies such as Bozkurt, Bilce Tekstil, Gelişim, Karar, Cemsel, Bozpa, Demezoğlu, Zevigas and more.

The next IFCO is scheduled from August 9 to 11, 2023.

More information:
Istanbul Fashion Connection IFCO Turkey

Source:

IFCO

10.03.2023

Lenzing Group: Difficult market environment and strategic success in 2022

Revenue rose to EUR 2.57 bn, while EBITDA declined to EUR 241.9 mn
Implementation of EUR 70 mn cost reduction program proceeding according to plan
Largest investment program in the company’s history including the lyocell plant in Thailand and the pulp mill in Brazil implemented on time and within budget
Outlook: Lenzing expects EBITDA in 2023 to be in a range of EUR 320 mn to EUR 420 mn

The Lenzing Group was increasingly affected by extreme developments on the global energy and raw material markets in the 2022 financial year, in tandem with most of manufacturing industry in Europe. The market environment also deteriorated significantly in the third and fourth quarters, while worsening consumer sentiment placed an additional burden on Lenzing’s business growth.

Revenue rose to EUR 2.57 bn, while EBITDA declined to EUR 241.9 mn
Implementation of EUR 70 mn cost reduction program proceeding according to plan
Largest investment program in the company’s history including the lyocell plant in Thailand and the pulp mill in Brazil implemented on time and within budget
Outlook: Lenzing expects EBITDA in 2023 to be in a range of EUR 320 mn to EUR 420 mn

The Lenzing Group was increasingly affected by extreme developments on the global energy and raw material markets in the 2022 financial year, in tandem with most of manufacturing industry in Europe. The market environment also deteriorated significantly in the third and fourth quarters, while worsening consumer sentiment placed an additional burden on Lenzing’s business growth.

In the year under review, revenue increased by 16.9 percent year-on-year to reach EUR 2.57 bn, primarily as a result of higher fiber prices. The quantity of fiber sold decreased, while the quantity of pulp sold rose. In addition to lower demand, the earnings trend particularly reflects the increase in energy and raw material costs. Earnings before interest, tax, depreciation and amortization (EBITDA) decreased by 33.3 percent year-on-year to EUR 241.9 mn in 2022. The net result for the year was minus EUR 37.2 mn (compared with EUR 127.7 mn in the 2021 financial year), while earnings per share stood at minus EUR 2.75 (compared with EUR 4.16 in the 2021 financial year).

Outlook
The war in Ukraine and the tighter monetary policy pursued by many central banks to combat inflation will continue to exert pressure on the global economy. The easing of China’s zero-Covid policy could lead to an unexpectedly rapid recovery. However, the IMF has warned that risks remain high overall and projects growth of 2.9 percent in 2023. Exchange rate volatility looks set to continue in regions that are important to Lenzing.

These challenging market conditions are also continuing to weigh on consumer confidence and sentiment in the sectors relevant to Lenzing. The outlook has improved slightly of late, with inventory levels returning to normal across the value chain. Nonetheless, subdued demand remains a source of concern for market players.

Inventories in the bellwether cotton market have diminished recently, although they remain above pre-pandemic levels. A decline in crops is foreseeable in the current 2022/2023 harvest season. The sharp rise in prices on the energy and raw material markets will continue to pose significant challenges for the market.

Overall, earnings visibility remains restricted.

In structural terms, Lenzing expects a continued rise in demand for environmentally friendly fibers in the textile and clothing industry, as well as in the hygiene and medical sectors. Thus, with its “Better Growth” strategy, Lenzing is very well positioned and will continue to drive growth in specialty products, while pursuing its sustainability targets including the transformation from a linear to a circular economy model.

In light of these factors and assuming a further market recovery in the current financial year, the Lenzing Group expects EBITDA in 2023 to be in a range of EUR 320 mn to EUR 420 mn.

More information:
Lenzing Gruppe Lenzing financial year 2022 Covid-19 lyocell fibers

Source:

Lenzing AG

Graphic Carbios

02.03.2023

Carbios doubles number of granted patents in two years

At end 2022, Carbios has 336 titles worldwide divided into 53 patent families for its innovation in enzymatic recycling of PET plastics and fibers, and its PLA biodegradation technology
Carbios’ team of Intellectual Property experts is dedicated to protecting its innovations

Carbios has doubled its number of issued patents since the last review published at the end of 2020. Carbios (and its subsidiary Carbiolice) currently holds 336 titles worldwide divided into 53 patent families. In 2022, several titles protecting the proprietary PET-degrading enzymes were granted in countries of interest such as the United States and also in Asian countries including Indonesia, South Korea, China, Japan and India. Carbios has also obtained grants within its patent families protecting the biodegradable plastics production process, notably the masterbatch containing the enzyme or its production process.

Carbios is expanding its intellectual property portfolio in regions and countries where there is strong demand for its disruptive technologies, notably :

At end 2022, Carbios has 336 titles worldwide divided into 53 patent families for its innovation in enzymatic recycling of PET plastics and fibers, and its PLA biodegradation technology
Carbios’ team of Intellectual Property experts is dedicated to protecting its innovations

Carbios has doubled its number of issued patents since the last review published at the end of 2020. Carbios (and its subsidiary Carbiolice) currently holds 336 titles worldwide divided into 53 patent families. In 2022, several titles protecting the proprietary PET-degrading enzymes were granted in countries of interest such as the United States and also in Asian countries including Indonesia, South Korea, China, Japan and India. Carbios has also obtained grants within its patent families protecting the biodegradable plastics production process, notably the masterbatch containing the enzyme or its production process.

Carbios is expanding its intellectual property portfolio in regions and countries where there is strong demand for its disruptive technologies, notably :

in Europe: 40 European titles, which could be granted in the 39 member states of the European Patent Organization
in North America: 41 titles in the United States and 23 in Canada
in Asia: 152 titles, including 37 in China, 27 in Japan and 24 in India

Carbios also has 14 patent applications that may be extended to other countries or regions of the world in the coming years.

“Over the past two years, we have mainly focused on strengthening the protection of our PET biorecycling process and its proprietary enzymes,” commented Lise LUCCHESI, Director of Intellectual Property at Carbios. “For the coming years, we will continue to consolidate the protection of this process, and that of our PLA biodegradation process, by filing new patent applications. We will also actively follow up on our filed patent applications in order to obtain granted patents.”

“Since the beginning of Carbios, the R&D and Intellectual Property departments have worked hand in hand to ensure maximum protection of our enzymes and processes,” commented Alain Marty, Chief Scientific Officer at Carbios. “These continued efforts to obtain extensive international protection are crucial to safeguard our innovations and ensure the industrial deployment of our technologies.”

More information:
Carbios patent enzymatic textile recycling intellectual property

Source:

Carbios

02.03.2023

VDMA: Way2ITMA

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

Dirk Vantyghem introduced the core issues of the EU textile strategy launched in 2022, which is the most ambitious plan ever, to push the textile sector towards sustainability and transparency, and promote a new circular business model. If wrongly designed, that new framework may collapse the European textile value chain. But if done rightly, the changes ahead could bring a paradigm shift in the sector, where competitiveness is no longer based on price only, but also on sustainability and innovation, explained Vantyghem.

Francis Elias Junker showed high level of expertise for mechanical textile recycling for both spinning and nonwovens industries that Andritz has. The company has a diversity of solutions to offer and several cooperation partners, covering the value chain from recovery of fiber to the chemical modification and preparation for the production of yarn.

Tanja Karila gave an overview of how Infinited Fiber is turning textile waste into new fibers. Patented technology turns post-consumer textile waste into brand new premium quality fibers for the textile industry. The textile-to-textile recycling technology captures the value in waste that would otherwise be landfilled or burned.

More information:
ITMA 2023 Sustainability Webinar

Source:

VDMA e. V.
Textile Machinery