From the Sector

A sector alliance that was formed to tackle issues relating to microplastics has completed the next phase of its project to develop a harmonised industry standard for the supply chain. The Cross Industry Agreement (CIA) has revealed the results of a fibre fragmentation trial that has been carried out in advance of establishing a CEN Standard (from the European Committee for Standardization). Once confirmed, the standard will also become an ISO standard under the Vienna Agreement, providing apparel manufacturers and policy makers with a vital tool as part of wider work to reduce microfibre shedding into the environment.

In 2018, five industry organisations agreed to join forces to proactively tackle the issue of microplastics, and signed the Cross Industry Agreement. The initial signatories were European industry associations that represent the European and global value chains of garments and their associated maintenance – the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.), European Man-Made Fibres Association (CIRFS), European Outdoor Group (EOG), EURATEX the European apparel and textile industry confederation, and the Federation of the European Sporting goods Industry (FESI). Together, the five organisations understood that the very first step to enable global action around the topic, was to agree a harmonised test method which would allow the collection and comparison of globally generated data, to aid the identification of solutions.

The microfibre shedding test method was developed thanks to the joint efforts and cooperation of experts from 28 European, American and Asian organisations; the result was handed over to CEN in 2020. Since then, representatives from the CIA have been working with CEN to fine tune details in order to meet the requirements for a CEN Standard. To verify the reproducibility of the method, the partners have carried out a round robin trial (RRT) to determine if the method could be replicated in different laboratories and produce similar results. 10 organisations participated in the RRT, which was co-ordinated by the CIA, sending fabric samples to all of the laboratories involved and then collecting and analysing the data.

The results from the RRT show statistically significant consistency, both within and between participating laboratories, which demonstrates that the method is both repeatable in the same setting and reproducible in other laboratories.

The CIA has submitted the results of the RRT to CEN, with the intention that the CEN Standard is confirmed in the near future. Once that has happened, it will be promoted throughout the apparel industry and will become a key tool for researchers, businesses and governments as they accelerate efforts to reduce microfibre shedding associated with garment production.

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

The web-based monitoring tool gives the user access to cutter- performance data at a glance, any time of day. Reliable key performance indicators are available at all times to help users maximize productivity. The system records productivity levels over a freely definable period using Zünd Cut Center – ZCC (Version 3.4 or later) as data source. Data monitoring provides information users need in order to make informed decisions. This comprehensive overview of production data reveals connections that are often overlooked. Zünd Connect supplies valuable key performance indicators for assessing how efficiently cutting systems are working. To be able to improve cutter efficiency, potential areas of improvement must be uncovered and recognized. This potential lies primarily in the technology but also in the way it is being used.

Zünd Connect is available in a "Monitor" or an "Analyzer" version.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, and SABIC, a global leader in the chemical industry, announced a collaboration to create recycled-based Dyneema®. Through a joint pilot with multiple CirculariTeam® members, the manufacturing and usage of Dyneema® using mixed plastic waste as feedstock (via mass balance approach) will be successfully demonstrated. It is an important step toward the future goal of fully closing the loop by delivering Dyneema® made from ultra-high molecular weight polyethylene (UHMwPE) waste. This collaboration underlines DSM’s and SABIC’s efforts to accelerate a circular economy for materials.

By working together with members of CirculariTeam®, DSM will produce recycled-based Dyneema® made using SABIC’s certified circular ethylene as a pilot project in both a sailing rope and a pelagic trawl net application. The circular ethylene, from SABIC’s TRUCIRCLE™ portfolio, uses mixed plastic waste as feedstock (mass balance approach), which not only contributes to preventing valuable plastic from becoming waste and the avoidance of carbon emissions compared to incineration, but it will also help preserve fossil resources. These pilots are an important early-stage milestone in the journey toward making fully circular Dyneema® from HMPE post-production and post-consumer waste.

Jon Mitchell, Managing Director at Marlow Ropes: “We’re proud to be one of the first manufacturers to integrate recycled-based Dyneema® within our products and demonstrate the material’s feasibility. By collaborating with materials science pioneers such as DSM and SABIC, we are able to create products that not only deliver superlative functional performance but also have a lower environmental impact. Our products are trialed and tested by professional offshore sailing teams including 11th Hour Racing Team, a proud partner of ours at Marlow, with whom we share a progressive approach to seeking sustainable solutions: no more business as usual."

Klaus Walther, Managing Director at Gleistein: “Warm congratulations to DSM and SABIC for pushing the boundaries of science to deliver a truly unique product. We’re proud that our ropes can be produced from what once was typical household plastic waste. This is an important stepping stone towards becoming circular. It will enable our customer Maritiem BV to further develop high-tech fishing gear whilst contributing to the circular economy. Not to forget Cornelis Vrolijk Fishing Company, who again illustrate their commitment to Corporate Social Responsibility by introducing this concept in fishery.”

• From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

A particular focus will be placed on upcoming policies and regulations and how they impact renewable carbon. The members are currently deciding on where to start specifically, but questions that may be considered are: What does the new climate law and the “Fit for 55-Package” mean for chemicals and materials? What can be expected from REACH and microplastics restrictions? How relevant is the “Sustainable Products Initiative” and the coming restrictions for Green Claims? Circular Economy, Zero Pollution and Sustainable Financing are keywords of the future European landscapes, which might become very concrete for chemistry and materials in the next few years. To what extent the concept of renewable carbon for materials is considered in policy already and how it could be further introduced in future legislation are two of the main questions investigated in the working group “Policy”.

This working group is open to all members of RCI. Policy experts provide the respective analysis as a foundation, organising discussions between members of the policy group and plan meetings with policymakers to introduce the Renewable Carbon concept.

Additional working groups have been created, one with a focus on communication, the other looking at the development of a renewable carbon label. In early September, a renewable carbon community will be launched as a starting point for even more interaction between the members, to discuss strategies, create new value chains and start project consortia.

The Renewable Carbon Initiative (RCI) is a dynamic and ambitious group of interested parties. Membership numbers have now more than doubled since the launch almost a year ago, with RCI now boasting 25 members, 6 partners and over 200 supporters. It welcomes all companies that are on the way to transform their resource base from fossil to renewable.

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

In general, there are two options: x ray and light fluorescence, i.e. fluorescent X-rays or light. With the first option, the base color has no influence (not even black) and the customer benefits from low addition dosage and batch price, but this method requires higher investment. "With light fluorescence, on the other hand, detection is done by a measuring device, which is preconfigured by our partner or by us directly. Different types are available, from handy hand-held measuring devices to stationary office solutions to inline spectrometers, in order to have a control take place directly during production," Ludwig explains. With this method, the masterbatch dosage is based on the base color, among otherv things. The method of operation is fast and simple, and the necessary investment is also manageable.

From injection molding and extrusion to transparent and fiber applications, almost all areas of plastics processing come into question.

The 2022 edition of Cinte Techtextil China has been confirmed to take place from 6 – 8 September at the Shanghai New International Expo Centre. 2021 saw 366 exhibitors and 14,868 visits recorded at the June hybrid event, which offered in-person and digital options for suppliers and buyers.

This year’s edition of Cinte Techtextil China marked the first time the fair was held annually, and the second year physical and online participation options were available, with both aspects well received by exhibitors and visitors.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd elaborated: “The response from our exhibitors this year was the Chinese market is still growing strongly, and having an annual edition allows them to benefit from these opportunities on a more regular basis. The domestic economy has shown strong resilience over 2020 and so far in 2021, and this has allowed the technical textiles and nonwovens sector to maintain the growth momentum it has experienced over the past years. As more economies return to normal in 2022, we expect export orders for the sector to receive a further boost which will benefit those overseas companies with business in the Chinese market.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span the full range of potential uses of modern technical textiles and nonwovens. These categories also span the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

The Turkish company ARIKAN Mensucat Industry and Trade Inc. was founded in 1993 and is located in Kahramanmaraş, one of the southernmost cities of the country. Today, the family-owned company employs around 1,500 people and finishes around 55 tons of knitwear every day. In addition to many well-known Turkish fashion manufacturers, ARIKAN also supplies international manufacturers in Europe, Russia, the Gulf States and other leading international markets.

The German machinery manufacturer BRÜCKNER supported the Turkish company from the very beginning. From the foundation of the dyeing and finishing plant, BRÜCKNER supplied three stenters for the finishing of the high-quality knitted fabric in 2014. Two more lines followed in 2016. For decades, BRÜCKNER has been the market leader for the finishing of knitted fabric. Especially for very fine and elastic fabric, special line configurations and technological know-how are necessary to be able to produce a high-quality end product. During the drying and heat-setting process, for example, extremely accurate and uniform temperature distribution over the entire length and width of the dryer is essential. In the BRÜCKNER stenter this is achieved, among other things, by the alternating arrangement of the thermal zones every 1.5 meters and by the proven split-flow air system.

The machine operators at ARIKAN appreciate the easy control of BRÜCKNER lines. The visualization is intuitively designed and offers many auxiliary systems for an optimized production process. In addition, significant energy savings can be achieved with just a few changes to the machine parameters.

The management at ARIKAN attaches great importance to energy saving, especially in the fabric finishing department. The drying process is one of the most energy-intensive in the entire process chain, therefore the biggest savings can be made here. These have a direct impact on the manufacturing costs of the textiles and thus on competitiveness in the market. In the meantime, talks are already in progress for another BRÜCKNER line which will include a very special feature: a combined heating system for the dryer. For many customers - and so also for ARIKAN in Turkey - e.g. steam energy is available free or very cheap. With the combined heating system developed by BRÜCKNER it is possible to use this steam energy for heating up the dryer and thus to achieve significant savings. If the available steam is not sufficient for a running process, it is automatically switched over to gas heating. This mode of operation does not only have an effect on the energy costs, but also makes a considerable contribution to environmental protection.

In light of recent Covid-19 cases in China, the Autumn Editions of Intertextile Shanghai Apparel Fabrics, Intertextile Shanghai Home Textiles and Yarn Expo will be rescheduled to 9 – 11 October 2021. The fairs were originally due to take place at the end of August at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained: “To comply with the government guidelines for pandemic containment and following discussions with our stakeholders, we have made the decision to postpone the fairs from their original August timing. To allow our exhibitors and buyers as much time as possible to plan ahead, we have already confirmed new dates with the fairground for the three concurrent fairs: 9 – 11 October.”

“I would like to thank the participants of all three fairs for their understanding and ongoing support as we continue to operate in uncertain times. We remain dedicated to providing a quality international trading platform for three sectors for the autumn / winter sourcing season, and our overseas suppliers will still be able to participate through our hybrid exhibition scheme if they are unable to be in Shanghai in-person.”

Exhibitors or visitors with any queries about these fairs should email textile@hongkong.messefrankfurt.com, or visit the fairs’ respective websites:
•    Intertextile Shanghai Apparel Fabrics: https://intertextileapparel.hk.messefrankfurt.com/
•    Intertextile Shanghai Home Textiles: https://intertextilehome.hk.messefrankfurt.com/
•    Yarn Expo: www.yarnexpochina.com

Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. The co-organisers of Yarn Expo are Messe Frankfurt (HK) Ltd and the Sub-Council of Textile Industry, CCPIT. Intertextile Shanghai Home Textiles is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

Freudenberg Performance Materials (Freudenberg) offers a range of efficient interlinings, tapes and thermal insulation materials for workwear and protective clothing. The materials not only withstand diverse kinds of strain they are exposed to in everyday work and washing procedures but also offer great comfort.

Innovative materials and manufacturing technology
The nonwoven and woven interlinings and tapes stand out due to a number of features, such as increased stability, elasticity, abrasion resistance and wind-blocking properties. Thanks to the sophisticated adhesive technology used by the manufacturer of technical textiles, some products are especially resistant and durable.

Highly flexible and resilient interlinings as well as Freudenberg comfortemp® thermal insulation materials are used for protective clothing, and they do not only protect the wearer from danger but also ensure the wearer’s comfort in any kind of weather. Furthermore, hem and edge stabilisation tapes ensure optimal fit and reflective tapes provide additional safety.  

Active contribution to sustainability
Many products of the Freudenberg Workwear Range consist of a high percentage of recycled polyester coming from post-consumer PET bottles.

The 11^th edition of RISE®, Research, Innovation & Science for Engineered Fabrics Conference will be presented virtually on Sept. 28-30 with more than 150 professionals in product development, materials science, and new technologies.

The conference will culminate on Sept. 30 with the presentation of the 2021 RISE® Innovation Award recognizing problem-solving innovations that advance the nonwovens industry.

The program includes presentations from industry leaders, round-table discussions and question-and-answer sessions on the key themes of material science developments for sustainable nonwovens, sustainability, increasing circularity in nonwovens, and promising innovations in nonwovens, processes and materials:

• Promising Materials Development Using PLA
  presented by Behnam Pourdeyhimi, Ph.D., William A. Klopman Distinguished Professor and Executive Director, North Carolina State University, The Nonwovens Institute
• Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology at Its Best, featuring insights from Fabio Zampollo, CEO, Teknoweb Materials S.r.l.
• Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles
  with speakers, DeeAnn Nelson, Ph.D., Development Program Manager, and Nick Carter, Vice-President of Marketing and Business Intelligence, both from Avgol Nonwovens
• High-Loft, Ultra-Soft Hygiene Solutions,
  presented by Paul Rollin, Ph.D., Global Team Lead – Nonwovens, ExxonMobil Chemical Company
• Innovating a Sustainable Future for Nonwovens; A European Perspective
  given by Matthew Tipper, Ph.D., Operations Director, Nonwovens Innovation & Research Institute Ltd., (NIRI), UK
• Filtration Media Functionalized with Zinc Oxide
  by Wai-shing Yung, Ph.D., Technical Director, Ascend Performance Materials