From the Sector

Reset
18 results
17.11.2021

C.L.A.S.S. welcomes Sensil® BioCare by NILIT into its material hub

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.

NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.

NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in  the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.

Source:

C.L.A.S.S.

(c) Abu Dhabi Government Media Office
15.11.2021

Partnership between ADNOC and Borealis to expand Borouge Facility

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

The world-scale expansion confirms both partners’ commitment to the growth of Borouge and to support chemical production, and advanced manufacturing and industry in Ruwais, a key pillar of Abu Dhabi and the UAE’s technology, innovation and industrial development strategy. Borouge produces crucial industrial raw materials, which are exported to customers globally and used by local companies, boosting local industrial supply chains and enhancing In-Country Value.

Borouge 4 will capitalize on the projected growth in customer demand for polyolefins, driven by their use in manufactured products in the Middle East, Africa and Asia. The facility will also enable the next phase of growth at the Ruwais Industrial Complex by supplying feedstock to the TA’ZIZ Industrial Chemicals Zone.

Borouge 4 will have an industry-leading focus on sustainability leveraging the capabilities of both shareholders. The facility will utilize Borealis’ proprietary Borstar technology, to produce a product portfolio focused on durable applications for energy, infrastructure, advanced packaging, and agriculture sectors. This unique technology, in combination with hexene co-monomer, will enable the production of advanced packaging grades with up to 50% recycled polyethylene content.

Subject to an in-depth study, a Carbon Capture unit that would reduce CO2 emissions by 80% could also be operational in time for Borouge 4’s start-up. The facility is also designed to capitalize on ADNOC’s recent initiatives on clean energy, decarbonizing its power supply through access to Abu Dhabi’s clean power sources. These initiatives are aligned with the UAE Net Zero by 2050 Strategic Initiative.

The first Borouge facility, producing 450,000 tons of polyethylene per annum was commissioned in 2001. Borouge 2 and Borouge 3 took capacity to 2 million tons and 4.5 million tons of polyethylene and polypropylene per annum in 2010 and 2014 respectively.  Borouge 4 will boost the company’s annual polyolefin production to 6.4 million tons, making Borouge one of the world’s largest single-site polyolefin facilities.

The new Borouge 4 facility will comprise:

  • An ethane cracker, with 1.5 million tons ethylene output per annum, which will be the fourth cracker in Borouge’s integrated petrochemical complex in Ruwais
  • Two additional Borstar® polyethylene (PE) plants, each with 700 thousand tons per annum capacity, using state-of-the-art Borealis Borstar third generation (3G) technology
  • A cross-linked PE (XLPE) plant of 100 thousand tons per annum capacity.
  • A hexene-1 unit, which will produce co-monomers for certain grades of polyethylene.
Source:

Borealis

09.11.2021

Alchemie Technology asks fashion industry to reduce emissions

Alchemie Technology, an innovator of low energy, waterless, textile dyeing and finishing technology, is calling on COP26 leaders to support the global fashion industry in the adoption of new manufacturing technology, which will dramatically reduce carbon emissions and fashion’s impact on climate change.

While the fashion industry is one of the most polluting on the planet, second only to oil and gas, and greenhouse gas emissions from textile dyeing at around 3% of global emissions outweigh that of all international flights and maritime shipping combined, it is an industry that can also reduce CO2 emissions the fastest, just by changing the way it dyes fabrics.  

Alchemie Technology, an innovator of low energy, waterless, textile dyeing and finishing technology, is calling on COP26 leaders to support the global fashion industry in the adoption of new manufacturing technology, which will dramatically reduce carbon emissions and fashion’s impact on climate change.

While the fashion industry is one of the most polluting on the planet, second only to oil and gas, and greenhouse gas emissions from textile dyeing at around 3% of global emissions outweigh that of all international flights and maritime shipping combined, it is an industry that can also reduce CO2 emissions the fastest, just by changing the way it dyes fabrics.  

Fabric dyeing is the most polluting part of fashion and activewear manufacturing, involving industrial scale dye baths and huge amounts of dye chemicals, steam, electrical power, and consequent high CO2 emissions.  Repeated washing of the dyed fabric, required to remove dye residue, is responsible for 20% of the world’s wastewater pollution and excess dye is discharged into waterways, affecting the health of some of the world’s poorest communities. In more regulated areas, water pollution is reduced through reliance on energy intensive water treatment plants.

However, an environmental step change can be achieved by adopting new digital technology that can dye fabrics with an 85% reduction in energy consumption and a dramatic 95% reduction of the 1.3 trillion litres of water currently used by the industry each year.

For example, dyeing one polyester shirt using current methods generates 4.5 litres of wastewater and produces 0.17 Kg of CO2, compared to low energy digital technology, which uses less than 0.2 litres of water and reduces carbon emissions to 0.03 Kg.  Multiply these numbers by the billions of garments dyed each year and the scale of the environmental problem, if nothing changes, is clear to see. Equally, the amount by which the textile industry can improve its carbon footprint is dramatic and can be done quickly if action is taken now.

Source:

Alchemie Technology Ltd

(c) Alchemie Technology
03.11.2021

COPS26: Governments support critical to help fashion industry reduce emissions the fastest

  • Alchemie Technology asks world leaders to cut energy and CO2 emissions from global fashion industry

Alchemie Technology, innovator of low energy, waterless, textile dyeing and finishing technology, is calling on COP26 leaders to support the global fashion industry in the adoption of new manufacturing technology, which will dramatically reduce carbon emissions and fashion’s impact on climate change.

While the fashion industry is one of the most polluting on the planet, second only to oil and gas, and greenhouse gas emissions from textile dyeing at around 3% of global emissions outweigh that of all international flights and maritime shipping combined, it is an industry that can also reduce CO2 emissions the fastest, just by changing the way it dyes fabrics.  

  • Alchemie Technology asks world leaders to cut energy and CO2 emissions from global fashion industry

Alchemie Technology, innovator of low energy, waterless, textile dyeing and finishing technology, is calling on COP26 leaders to support the global fashion industry in the adoption of new manufacturing technology, which will dramatically reduce carbon emissions and fashion’s impact on climate change.

While the fashion industry is one of the most polluting on the planet, second only to oil and gas, and greenhouse gas emissions from textile dyeing at around 3% of global emissions outweigh that of all international flights and maritime shipping combined, it is an industry that can also reduce CO2 emissions the fastest, just by changing the way it dyes fabrics.  

Fabric dyeing is the most polluting part of fashion and activewear manufacturing, involving industrial scale dye baths and huge amounts of dye chemicals, steam, electrical power, and consequent high CO2 emissions.  Repeated washing of the dyed fabric, required to remove dye residue, is responsible for 20% of the world’s wastewater pollution and excess dye is discharged into waterways, affecting the health of some of the world’s poorest communities. In more regulated areas, water pollution is reduced through reliance on energy intensive water treatment plants.

However, an environmental step change can be achieved by adopting new digital technology that can dye fabrics with an 85% reduction in energy consumption and a dramatic 95% reduction of the 1.3 trillion litres of water currently used by the industry each year.

For example, dyeing one polyester shirt using current methods generates 4.5 litres of wastewater and produces 0.17 Kg of CO2, compared to low energy digital technology, which uses less than 0.2 litres of water and reduces carbon emissions to 0.03 Kg.  Multiply these numbers by the billions of garments dyed each year and the scale of the environmental problem, if nothing changes, is clear to see.  Equally, the amount by which the textile industry can improve its carbon footprint is dramatic and can be done quickly if action is taken now.
Dr Simon Kew, Managing Director, Alchemie Technology comments “The technology now exists to enable the textile industry to make a significant contribution to helping meet the world’s net zero, climate change goals. But it requires the support of governments through investment, grants and legislation and the critical effort of brands, and their manufacturing supply chains to work together to make the change.”

Source:

Alchemie Technology

28.10.2021

The Renewable Carbon Initiative (RCI) celebrates its first anniversary

After its launch on 20 September 2020, the RCI is proud to celebrate its first anniversary this fall. The balance sheet of the first year is impressive: starting from 11 founding members, that number increased to 30 member companies within 12 months. Numerous webinars, press releases, background information, a glossary and a comic allowed to convey the “Renewable Carbon” concept to the public. The RCI is actively working on labelling and policy analysis, and more activities will follow in the next year.

After its launch on 20 September 2020, the RCI is proud to celebrate its first anniversary this fall. The balance sheet of the first year is impressive: starting from 11 founding members, that number increased to 30 member companies within 12 months. Numerous webinars, press releases, background information, a glossary and a comic allowed to convey the “Renewable Carbon” concept to the public. The RCI is actively working on labelling and policy analysis, and more activities will follow in the next year.

Key for this success: the topic of renewable carbon in chemicals and materials is increasingly becoming a focus of politics and industry. Larger companies will have to report their GHG emissions and also the footprint of their products as part of legislative changes surrounding the European Green Deal. In this context, indirect emissions and the carbon sources of materials will play a much more crucial role. The RCI is actively working on solutions for companies to shift from fossil to renewable carbon, which consists of the use of bio-based feedstock, CO2-based resources and recycling. In the future, reporting on GHG emissions will also include Scope 3 emissions, which are all indirect emissions that occur along the company’s value and supply chain and where the used raw materials account for a large proportion of the footprint. Here is where the carbon source of chemicals and plastics comes into play as an important contributor to the carbon footprint. Without a shift from fossil to renewable carbon feedstocks (combining bio-based, CO2-based and recycled), a sustainable future and the Paris climate targets will be almost impossible to master.

To discuss, promote and realise the shift, 30 innovative companies have already joined forces to support the transition to renewable carbon, considering both technological and economical approaches – and helping to shape the political framework accordingly.

For the second year, RCI plans to focus on a comprehensive understanding of the expected political framework conditions in Europe and across the globe, since they will determine the future of chemistry and materials more than ever. Building on this knowledge, the topic of renewable carbon could then to be systematically integrated into new political directives, which has so far not been effectively managed.

In reality, the political focus lies on the strategy of decarbonising the energy sector, a very central and Herculean task. However, it cannot be applied to the chemical and material world because carbon is usually the central building block that cannot be dispensed with. On the contrary, the demand for carbon in the chemical and materials sectors is expected to more than double by 2050. In order to meet this demand in a sustainable manner, we must move towards quitting fossil carbon. For the first time in industrial history, it is possible to decouple chemistry and materials from petrochemicals and completely cover the demand through the utilisation of biomass, CO2 and recycling.

Source:

Renewable Carbon Initiative (RCI)

26.10.2021

We aRe SpinDye with its resource-saving dyeing technology in new collaboration

With its resource-saving dyeing technology, We aRe SpinDye takes place in H&M's latest Innovation Stories collection called Co-exist.

The use of We aRe SpinDye's technology contributes to reducing both water consumption and CO2 emissions, which in turn leads to a lower impact on the world's ecosystem and creates conditions for our co-existence with nature.

Up to 24% of a garment's entire climate footprint occurs during dyeing. We aRe SpinDye's technology can reduce the consumption of the earth's resources in textile production. On average, the reduction of water is -75%, chemicals -90% and energy consumption and CO2 emissions -30%.

In just one year, the clothing industry uses 9 billion cubic meters of water (which is in line with the annual need for drinkingwater for the entire population of our planet) and 168 million tons of process chemicals to dye fabrics. We aRe SpinDye now hopes that more players in the industry will pay attention to the ways that are available when it comes to resource-efficient dyeing process and quickly implement this technology in their production.

With its resource-saving dyeing technology, We aRe SpinDye takes place in H&M's latest Innovation Stories collection called Co-exist.

The use of We aRe SpinDye's technology contributes to reducing both water consumption and CO2 emissions, which in turn leads to a lower impact on the world's ecosystem and creates conditions for our co-existence with nature.

Up to 24% of a garment's entire climate footprint occurs during dyeing. We aRe SpinDye's technology can reduce the consumption of the earth's resources in textile production. On average, the reduction of water is -75%, chemicals -90% and energy consumption and CO2 emissions -30%.

In just one year, the clothing industry uses 9 billion cubic meters of water (which is in line with the annual need for drinkingwater for the entire population of our planet) and 168 million tons of process chemicals to dye fabrics. We aRe SpinDye now hopes that more players in the industry will pay attention to the ways that are available when it comes to resource-efficient dyeing process and quickly implement this technology in their production.

"The enormous resource consumption in the dyeing process is a global problem that must be addressed on a broad front. It is therefore inspiring to work with major brands with an organization that is sensitive to cutting-edge expertise and at the same time shows a willingness to work together to achieve common goals", says Andreas Andrén, CEO of We aRe SpinDye.

Source:

We aRe SpinDye

(c) Euratex
EU-27 Textile & Clothing Turnover
12.10.2021

EURATEX: Latest economic data confirm further recovery of the textile and clothing industry

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

European Textiles and Clothing (T&C) industry coming out of the Covid19-crisis, but facing new challenges ahead. This recovery may however be disrupted by the current supply chain and energy problems. Latest economic data on the European T&C industry confirm further recovery from the corona pandemic. The textile activity has now surpassed its pre-pandemic level from Q4 2019 (+3.6%); the clothing sector still remains 11.5% below, but continues to improve.

In quarter-on-quarter terms, the EU turnover showed signs of improvements across the sector. The textile turnover increased by +3.3% in Q2 2021, after slightly contracting in Q1 2021. Similarly, the business activity in the clothing sector expanded by +7% in Q2 2021, after increasing by +1% in the previous quarter.
 
In the 2nd quarter 2021, the EU-27 trade balance for T&C improved, resulting mostly from an increase of export sales across third markets and a drop of textile imports. T&C Extra-EU exports boomed by +49% as compared with the same quarter of the previous year. T&C Extra-EU imports went down by -26% as compared with the same quarter of the previous year, following a decrease of imports from some main supplier countries. EU imports from China and the UK collapsed due to a combination of Brexit and weaker demand in Europe.
 
During the second quarter of 2021, job creation was slowly stabilising in the textile industry (-0.2% q-o-q), while employment in the clothing sector continued to be affected by lower levels of production activity in industry during the first part of the year (-1.2%). When compared to its pre-pandemic level in Q4 2019, EU employment in Q2 2021 was still 4.4% down in textiles and 11.8% down in clothing.

However, this fragile recovery is hampered by higher shipping costs and prices’ increase in raw materials and energy. The cost of energy, in particular gas, has increased more than 3 times since the beginning of this year. Since the announcement of the EU’s “Fit for 55” package, we have seen CO2 prices rising above €60. This inevitably has an impact on the industry’s competitiveness, especially in a global context. The future recovery is also threatened by some factors limiting production, such as shortage of labour force and equipment, which are putting additional pressure on T&C industries.

Director General Dirk Vantyghem commented on these latest figures: “Our companies have shown great resilience during the pandemic, and their latest export performance is an encouraging sign of recovery. This recovery may however be disrupted by the current supply chain and energy problems. Once again, recent developments show that this transition towards more sustainable production can only work if organised in a global context, avoiding carbon leakage and with an effective level playing field. This must be considered in the upcoming EU Textiles Strategy.”

More information:
Euratex
Source:

Euratex

01.10.2021

Archroma celebrates 8 Years of creating positive impact

Archroma celebrates 8 years of leading the way to a sustainable world, with innovations and solutions aimed at creating added value sustainable for its partners, consumers and the planet.

Archroma came to life on 1st October 2013 from textile, paper and emulsions businesses acquired from Clariant by SK Capital Partners.
Building on decades of commitment to developing safer eco-friendlier chemistry, Archroma has become in the past 8 years a prominent name for more sustainable colors and performance, collaborating with leading brands such as Primark, G-Star, Patagonia, Esprit and more.

Archroma has introduced innovations, such as the EarthColors® made from non-edible plant waste from the food and herbal industry, Denisol® Pure, an indigo for aniline-free* denim, aniline being a category 2 carcinogen substance, and Smartrepel®, a PFC-free* water repellent solution. The company is also about to launch a new plant-based softener.

Archroma celebrates 8 years of leading the way to a sustainable world, with innovations and solutions aimed at creating added value sustainable for its partners, consumers and the planet.

Archroma came to life on 1st October 2013 from textile, paper and emulsions businesses acquired from Clariant by SK Capital Partners.
Building on decades of commitment to developing safer eco-friendlier chemistry, Archroma has become in the past 8 years a prominent name for more sustainable colors and performance, collaborating with leading brands such as Primark, G-Star, Patagonia, Esprit and more.

Archroma has introduced innovations, such as the EarthColors® made from non-edible plant waste from the food and herbal industry, Denisol® Pure, an indigo for aniline-free* denim, aniline being a category 2 carcinogen substance, and Smartrepel®, a PFC-free* water repellent solution. The company is also about to launch a new plant-based softener.

The company started to develop holistic solutions designed to bring innovation and performance, whilst reducing the impacts on water, energy and other natural resources. The savings generated by these 70+ system solutions are demonstrated by Archroma's proprietary ONE WAY Impact Calculator, a tool launched in 2012 and continuously upgraded to simulate and optimize the footprint of application processes.

Archroma also recently launched CASUAL X SMART, a sulfur dyeing system for trendy wash-down effects to make clothes that look smart at home and at work. The colors won't fade in the washing cycle, and the application process allows resource savings of up to 33% water, 21% energy and 35% chemical usage compared to a benchmark reactive & pigment garment dyeing.

With ONE WAY, a brand can calculate how much impact their current production and the Archroma Way collection will have on water, energy, chemical, raw material or CO2 footprint.

nova-Institute and YNCORIS are presenting the innovation award 2022: "Best CO2 Utilisation" (c) nova-Institut GmbH
30.09.2021

nova-Institute and YNCORIS are presenting the innovation award 2022: "Best CO2 Utilisation"

nova-Institute and YNCORIS together with CO2 Value Europe are looking forward to applications for the innovation award “Best CO2 Utilisation 2022”. The award will be granted at the well-established “Conference on CO2-based Fuels and Chemicals”, 23–24 March 2022 in Cologne.

With the innovation award “Best CO2 Utilisation 2022” together with YNCORIS and CO2 Value Europe, the nova-Institute offers innovators in the CCU field the unique opportunity to present and market their carbon capture or carbon utilisation (Power-to-X) technology, CO2-based fuel or chemical at one of the leading conferences on CO2 as a raw material. The only requirement for participation in the competition is that the product is already on the market or about to be launched in near future.

nova-Institute and YNCORIS together with CO2 Value Europe are looking forward to applications for the innovation award “Best CO2 Utilisation 2022”. The award will be granted at the well-established “Conference on CO2-based Fuels and Chemicals”, 23–24 March 2022 in Cologne.

With the innovation award “Best CO2 Utilisation 2022” together with YNCORIS and CO2 Value Europe, the nova-Institute offers innovators in the CCU field the unique opportunity to present and market their carbon capture or carbon utilisation (Power-to-X) technology, CO2-based fuel or chemical at one of the leading conferences on CO2 as a raw material. The only requirement for participation in the competition is that the product is already on the market or about to be launched in near future.

29.09.2021

The Renewable Materials Conference 2022

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

For the second time, nova-Institute presents numerous market highlights from bio- and CO2-based chemicals and materials as well as from chemical recycling: All material solutions based on renewable carbon. Together, there is sufficient potential to completely replace petrochemicals by 2050. To tackle climate change at its roots, all additional fossil carbon from the ground must be substituted with renewable alternatives. Over the course of three days, participants will get a comprehensive overview of the latest developments in the renewable material sector, with a focus on industry-ready solutions from a wide spectrum of sustainable raw materials and technologies.

In 2021, the new concept of the Renewable Materials Conference generated an outstanding response, which exceeded all expectations: 420 online participants witnessed a firework of innovations of non-fossil material. 60 speakers, 11 panel discussions, 500 public posts and 1,500 networking activities were proof of the lively exchange during the three conference days.

In 2022, nova-Institute plans to host the conference physically in the heart of Germany's fourth largest city, Cologne, just a few hours away from France, Belgium and the Netherlands. Expected are 400 participants on-site and many more online. On-site, the conference will be accompanied by a large exhibition where companies and institutes can showcase their recent developments. The supporting program, networking activities and many secluded spots at the location offers excellent opportunities to make new business contacts and refresh old ones.

The focus of the conference: All material solutions based on renewable carbon – avoiding the use of additional fossil carbon. The entire spectrum of renewable materials is covered: bio-based, CO2- based and recycled.

The program includes a diverse range of bio-based materials such as bio-based polymers, plastics and biocomposites (first and second generation, biowaste), CO2-based materials (from fossil and biogenic point sources, atmosphere) as well as mechanically and chemically recycled materials.

Source:

nova-Institut GmbH

26.08.2021

Conference on CO2-based Fuels and Chemicals 2022

  • Call for Papers and Posters

More than 200 leading international experts in Carbon Capture and Carbon Utilisation (Power-to-X) together with 20 exhibitors are expected to attend the hybrid event on 23–24 March 2022, in Cologne, Germany

Main topics of the conference are strategy & policy in CCU, renewable energy and green hydrogen production, carbon capture technologies, CO2-based fuels for transport and aviation, CO2-based building blocks, bulk and fine chemicals as well as advanced CCU technologies.

Carbon Capture and Utilisation (CCU) is one essential pillar for the supply of renewable carbon besides biomass utilisation and recycling. The transition to the direct use of CO2 as one alternative carbon source is needed as a key element to substitute fossil sources, to fight climate change and to shift towards sustainable and climate-friendly production and consumption. For providing the full benefits of CCU technologies the use of renewable energy is indispensable.

  • Call for Papers and Posters

More than 200 leading international experts in Carbon Capture and Carbon Utilisation (Power-to-X) together with 20 exhibitors are expected to attend the hybrid event on 23–24 March 2022, in Cologne, Germany

Main topics of the conference are strategy & policy in CCU, renewable energy and green hydrogen production, carbon capture technologies, CO2-based fuels for transport and aviation, CO2-based building blocks, bulk and fine chemicals as well as advanced CCU technologies.

Carbon Capture and Utilisation (CCU) is one essential pillar for the supply of renewable carbon besides biomass utilisation and recycling. The transition to the direct use of CO2 as one alternative carbon source is needed as a key element to substitute fossil sources, to fight climate change and to shift towards sustainable and climate-friendly production and consumption. For providing the full benefits of CCU technologies the use of renewable energy is indispensable.

Especially the supply of green hydrogen is crucial for the production of CO2-based fuels for transportation and aviation as well as for bulk and fine chemicals.

The “Conference on CO2-based Fuels and Chemicals 2022”, 23–24 March 2022, Cologne, Germany. As a hybrid conference it combines a “live” in-person event with a “virtual” online component, www.co2-chemistry.eu.

More information:
CO2
Source:

nova-Institut GmbH

22.07.2021

Lenzing awarded platinum status for sustainability by EcoVadis

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group’s ambitious climate targets form an essential part of its strategy and responsibility to future generations. In 2019, Lenzing became one of the world’s first fiber manufacturers to commit to reducing CO2 emissions per ton of product by 50 percent by 2030, and even becoming climate-neutral by 2050. The Science Based Targets Initiative, a recognised organisation in the area of climate-relevant target-setting, has scientifically validated Lenzing’s climate targets.

This scientific validation also forms one of the essential criteria that EcoVadis highlights in its rating. In addition, the responsible procurement of raw materials – according to social and ecological aspects – was also highlighted as a further core element in the company’s sustainability strategy, as well as support for external environmental initiatives (Sustainable Apparel Coalition, Fashion Industry Charter for Climate Action) and initiatives on labour and human rights issues (Sustainable Apparel Coalition).

Marabu to be climate neutral from July 2021 (c) Marabu GmbH & Co. KG
01.07.2021

Marabu to be climate neutral from July 2021

Marabu is one of the first ink manufacturers to achieve climate neutrality. All Marabu Business Units will, where possible, make a specific contribution to achieve the 17 United Nations Sustainable Development Goals (SDGs) with PROJECT GREEN and therefore participate in the Green Deal.

Marabu is one of the first ink manufacturers to achieve climate neutrality. All Marabu Business Units will, where possible, make a specific contribution to achieve the 17 United Nations Sustainable Development Goals (SDGs) with PROJECT GREEN and therefore participate in the Green Deal.

"We are safeguarding the future of the next generations and are proud that we have managed to be a climate neutral company from July 2021 with the Tamm and Bietigheim sites. All our products, whether printing inks or creative colours, are climate neutral, too," explains York Boeder, CEO Executive Committee. "Our so-called PROJECT GREEN combines all measures that are taking us on our journey to climate neutrality. Climate protection is a particular concern for us, to which we have made a binding commitment within the scope of an extensive sustainability strategy. In accordance with our Marabu Green Deal, we avoid and reduce emissions wherever possible, e. g. by using green electricity, energy-saving schemes, mobility concepts or environmentally friendly materials. We offset all unavoidable CO2 emissions by supporting internationally certified climate protection projects. We are continually implementing measures to improve our carbon footprint and update them annually to make their success measurable. We have therefore set ourselves the active goal of reducing our CO2 emissions by another 25 % by 2030."

For decades, Marabu has invested in the research and development of safe production processes, environmentally friendly products, and clean technologies with the aim of preserving the natural environment. Marabu has worked with Climate Partner to analyse all the CO2 emissions from the sites in Tamm and Bietigheim and determine its carbon footprint. Including all product-related factors such as raw materials and logistics, Marabu currently generates approx. 18,500 tons of unavoidable CO2 emissions. This value is the positive result of a number of climate-friendly measures pursued by Marabu, such as the early switch to green electricity in 2007.

Marabu's main activities to avoid and reduce CO2 emissions:

  • Energy - Switching to green electricity from hydropower
  • Mobility - Migration of the company's vehicles to electric and hybrid cars as well as in e-charging stations
  • Production - Use of renewable energies and resource-efficient production processes
  • Raw materials - Replacing critical substances with environmentally friendly alternatives for new and existing products
  • Transporting - Climate-neutral freight carriers and lower-emission transport methods like shipping or road transport replace air freight wherever possible
  • Product technology - Modern, low-emission products
Source:

Marabu GmbH & Co. KG

Borealis: Innovative Recycling Solutions with Renasci N.V. (c) Renasci
01.07.2021

Borealis: Innovative Recycling Solutions with Renasci N.V.

  • Borealis deepens partnership with innovative recycling solutions provider Renasci N.V., acquiring a 10% minority stake in the Belgium-based creator of the Smart Chain Processing (SCP) concept
  • Deal supports Borealis integrated approach to achieve a true circular economy of plastics in the most eco-efficient way, as defined by its circular cascade model
  • EverMinds™ in action: Game-changing collaboration to accelerate plastics circularity

Borealis announces that it has entered into a multi-dimensional partnership with Renasci N.V., a provider of innovative recycling solutions and creator of the novel Smart Chain Processing (SCP) concept. The partnership is another key enabler for Borealis to realise its ambitions to bring circular base chemicals and polyolefins to market, and to deliver on its promise to bring 350 kilotons of recycled polyolefins into circulation by 2025.

  • Borealis deepens partnership with innovative recycling solutions provider Renasci N.V., acquiring a 10% minority stake in the Belgium-based creator of the Smart Chain Processing (SCP) concept
  • Deal supports Borealis integrated approach to achieve a true circular economy of plastics in the most eco-efficient way, as defined by its circular cascade model
  • EverMinds™ in action: Game-changing collaboration to accelerate plastics circularity

Borealis announces that it has entered into a multi-dimensional partnership with Renasci N.V., a provider of innovative recycling solutions and creator of the novel Smart Chain Processing (SCP) concept. The partnership is another key enabler for Borealis to realise its ambitions to bring circular base chemicals and polyolefins to market, and to deliver on its promise to bring 350 kilotons of recycled polyolefins into circulation by 2025.

SCP concept leaves no waste behind
The SCP concept developed by Renasci is a proprietary method of maximising material recovery in order to achieve zero waste. It is unique because it enables the processing of multiple waste streams using different recycling technologies – all under one roof. At the newly-built Renasci SCP facility in Oostende, Belgium, mixed waste – plastics, metals, and biomass – is automatically selected and sorted multiple times.

After sorting, plastic waste is first mechanically recycled, and then in a second step any remaining material is chemically recycled into circular pyrolysis oil and lighter product fractions, which are used to fuel the process.

Other types of sorted waste such as metals and organic refuse are further processed using other technologies. In the end, only 5% of the original waste remains, and even this residual material is not landfilled, but used as filler in construction materials. Because of this extremely efficient way of processing, the overall CO2 footprint of these waste streams is greatly reduced – yet another advantage of the circular SCP concept.

The cascade model is Borealis’ integrated circular approach
Borealis circular cascade model sits at the heart of its ambition to achieve a truly circular economy, by combining carefully chosen technologies in a complementary and cascading way to achieve full circularity. In this way, Borealis aims to give plastic products multiple lifetimes in the most sustainable way possible. Starting with optimising product design, first for eco-efficiency, then for re-use and finally for recycling. Once a product has reached its end of life, we must close the plastics loop: first with mechanical recycling to make products with the highest possible value, quality and lowest carbon footprint; then utilising chemical recycling, as a complement to mechanical recycling, to further valorise residual streams which would otherwise go to incineration, or even worse to landfills. The valorised material from mechanical and chemical recycling is then processed with Borealis Borcycle™ recycling technology consisting of Borcycle M for mechanical recycling and Borcycle C for chemical recycling, providing high quality solutions for more sophisticated applications, such as food packaging and healthcare.

The SCP concept is aligned to Borealis’ ambition to close the loop on plastic waste as encapsulated in its circular cascade model.

Source:

Borealis

Neuer Epson Europa-Präsident Yoshiro Nagafusa (c) Epson
Epson Europa-Präsident Yoshiro Nagafusa
07.06.2021

Neuer Epson Europa-Präsident Yoshiro Nagafusa

Yoshiro Nagafusa ist neuer Epson Europa Präsident. Nagafusa unterstützt in seiner Funktion die Umsetzung der globalen Umweltvision 2050 des Unternehmens und den Businessplan „Epson 25“ im europäischen Raum. In diesen mittel- und langfristigen Planungen zielt Epson auf eine Reduzierung der Kohlenstoffemissionen gemäß dem 1,5℃-Szenario bis 2030 ab. Bis 2050 plant das Unternehmen besser als CO2-neutral zu sein und CO2-negativ zu wirtschaften sowie keine nicht-erneuerbaren Rohstoffe wie Öl und Metall zu verbrauchen.

Nagafusa war vor seiner Berufung zum Präsidenten von Epson Europe B.V. als Senior Vizepräsident bei Epson Europa verantwortlich für die Optimierung der Infrastruktur und der Vertriebsabläufe in der CISMEA-Region. Er hatte in seiner mehr als 30-jährigen Unternehmenszugehörigkeit eine Reihe von Führungspositionen bei Epson sowohl in Europa als auch weltweit inne. Ende der 90er Jahre (1997-1998) war Yoshiro Nagafusa bei der Epson Deutschland GmbH am früheren Standort in Düsseldorf im Einsatz.

Yoshiro Nagafusa ist neuer Epson Europa Präsident. Nagafusa unterstützt in seiner Funktion die Umsetzung der globalen Umweltvision 2050 des Unternehmens und den Businessplan „Epson 25“ im europäischen Raum. In diesen mittel- und langfristigen Planungen zielt Epson auf eine Reduzierung der Kohlenstoffemissionen gemäß dem 1,5℃-Szenario bis 2030 ab. Bis 2050 plant das Unternehmen besser als CO2-neutral zu sein und CO2-negativ zu wirtschaften sowie keine nicht-erneuerbaren Rohstoffe wie Öl und Metall zu verbrauchen.

Nagafusa war vor seiner Berufung zum Präsidenten von Epson Europe B.V. als Senior Vizepräsident bei Epson Europa verantwortlich für die Optimierung der Infrastruktur und der Vertriebsabläufe in der CISMEA-Region. Er hatte in seiner mehr als 30-jährigen Unternehmenszugehörigkeit eine Reihe von Führungspositionen bei Epson sowohl in Europa als auch weltweit inne. Ende der 90er Jahre (1997-1998) war Yoshiro Nagafusa bei der Epson Deutschland GmbH am früheren Standort in Düsseldorf im Einsatz.

Epson 25 Renewed und Umweltvision 2050
Über den mittelfristigen Plan „Epson 25 Renewed“ stellt Epson die Weichen für die Umsetzung der langfristigen Umweltvision 2050: Ziel des Plans ist, Nachhaltigkeit noch stärker in allen Unternehmensbereichen zu verankern und mithilfe von effizienten, kompakten und präzisen Technologien einen positiven Beitrag für die Gesellschaft zu leisten. Epson möchte Menschen, Branchen und Unternehmen mit intelligenten Lösungen ausstatten, die Personen, Dinge und Daten verbinden. Im Zentrum stehen dafür Initiativen in den Bereichen Nachhaltigkeit und Umweltschutz, digitale Transformation (DX) und gemeinsame Innovationen.

Das zentrale Ziel der Epson Umweltvision 2050 ist, bis zum Jahr 2050 eine negative CO2-Bilanz zu erreichen. Darüber hinaus sollen keine nicht-erneuerbaren Rohstoffe (wie Öl und Metall) mehr verbraucht werden. Wesentliche Maßnahmen, um diese Ziele zu erreichen, sind Dekarbonisierung, das Schließen von Ressourcenkreisläufen, die Entwicklung von innovativen Umwelttechnologien sowie die Verringerung von Umweltbelastungen durch den Einsatz der Produkte. Ein Kernelement ist die Nutzung von Ökostrom. Epson ist RE100 beigetreten, einem globalen Kollektiv von Unternehmen, die sich zu 100 Prozent erneuerbarem Strom verpflichtet haben. Alle Standorte des Konzerns weltweit werden bis 2023 ihren Strombedarf zu 100 Prozent aus erneuerbaren Energiequellen decken. Epson Deutschland nutzt bereits seit über 10 Jahren ausschließlich Ökostrom.

Source:

Epson Deutschland GmbH / LEWIS

Fraunhofer UMSICHT
27.05.2021

Online-Workshop: CO2 in Rohstoffe für die chemische Industrie umwandeln

Einblicke in das Verbundprojekt Carbon2Chem®

Welchen Beitrag leistet Forschung zum Klimaschutz? Und wie kann diese Arbeit besser von der Gesellschaft wahrgenommen werden? Diese Fragen stehen im Zentrum des Online-Workshops »Every day for future: Wie sich Forschung für den Klimaschutz engagiert – am Beispiel von Carbon2Chem®« am 29. Juni von 14:00 - 17:00 Uhr. Die Teilnahme ist kostenlos.

Anmeldungen sind unter https://s.fhg.de/a4S möglich.

Im Verbundprojekt Carbon2Chem® arbeiten 19 Partner aus Wirtschaft und Wissenschaft an Lösungen, um unvermeidbares CO2, das z. B. bei der Produktion von Stahl entsteht, in Rohstoffe für die chemische Industrie umzuwandeln. Gefördert wird das Vorhaben vom Bundesministerium für Bildung und Forschung, die Koordination liegt in den Händen des Fraunhofer UMSICHT, des Max-Planck-Instituts für Chemische Energiekonversion (MPI-CEC) und der thyssenkrupp AG. Im Rahmen des Workshops gewähren Forschende des Fraunhofer UMSICHT und des MPI-CEC Einblicke in die gemeinsame Arbeit im Carbon2Chem®-Labor am Standort Oberhausen.

Einblicke in das Verbundprojekt Carbon2Chem®

Welchen Beitrag leistet Forschung zum Klimaschutz? Und wie kann diese Arbeit besser von der Gesellschaft wahrgenommen werden? Diese Fragen stehen im Zentrum des Online-Workshops »Every day for future: Wie sich Forschung für den Klimaschutz engagiert – am Beispiel von Carbon2Chem®« am 29. Juni von 14:00 - 17:00 Uhr. Die Teilnahme ist kostenlos.

Anmeldungen sind unter https://s.fhg.de/a4S möglich.

Im Verbundprojekt Carbon2Chem® arbeiten 19 Partner aus Wirtschaft und Wissenschaft an Lösungen, um unvermeidbares CO2, das z. B. bei der Produktion von Stahl entsteht, in Rohstoffe für die chemische Industrie umzuwandeln. Gefördert wird das Vorhaben vom Bundesministerium für Bildung und Forschung, die Koordination liegt in den Händen des Fraunhofer UMSICHT, des Max-Planck-Instituts für Chemische Energiekonversion (MPI-CEC) und der thyssenkrupp AG. Im Rahmen des Workshops gewähren Forschende des Fraunhofer UMSICHT und des MPI-CEC Einblicke in die gemeinsame Arbeit im Carbon2Chem®-Labor am Standort Oberhausen.

Am Anfang steht eine Keynote von Prof. Görge Deerberg. Der stellv. Institutsleiter des Fraunhofer UMSICHT und einer von drei Projektkoordinatoren, nimmt die Teilnehmenden mit auf eine Reise von den Carbon2Chem®-Anfängen über aktuelle Arbeiten bis zu den für 2026 angestrebten Zielen. Es folgen kurze Vorträge und Filmbeiträge von Wissenschaftler*innen. Sie berichten über ihren Forschungsalltag und gehen dabei auch auf Herausforderungen ein, denen sie sich stellen müssen. Die Themen umfassen die Nutzung von Gasen und die Bedeutung von Katalysatoren ebenso wie die Frage, was mit dem CO2 passiert, wenn es zu einem nutzbaren Rohstoff geworden ist.

Abschließend hält Prof. Harald Welzer von FUTURZWEI. Stiftung Zukunftsfähigkeit einen Impulsvortrag und diskutiert mit Prof. Görge Deerberg, wie Forschung zum Klimaschutz von der Gesellschaft besser wahrgenommen werden kann. Dabei spielen auch Fragen und Anregungen aus dem Teilnehmendenkreis eine Rolle, die während des Workshops via Chat eingehen.

 

More information:
CO2 Fraunhofer UMSICHT
Source:

Fraunhofer UMSICHT
 

GREENBOATS, Sicomin and Bcomp Selected as JEC Innovation Awards 2021 Finalists (c) JEC Group
17.05.2021

GREENBOATS, Sicomin and Bcomp Selected as JEC Innovation Awards 2021 Finalists

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

Sicomin, the formulator and supplier of the leading range of GreenPoxy bio-based epoxy resin systems, supplied its DNV GL approved InfuGreen 810 resin system that was used to infuse the Green Nacelle’s main structural sandwich panels, as well as providing intumescent FR gelcoats, bio-based laminating resins and UV resistant clear coatings for the groundbreaking new nacelle.  Materials, as well as on-site technical support, were delivered by Sicomin’s German distributor TIME OUT Composites.

The winners of the awards will be announced during JEC Connect which will be held on the 1st and 2nd June 2021.

Source:

100% Marketing

04.05.2021

Covestro: CO2-Technologie für den Europäischen Erfinderpreis nominiert

  • Dr. Christoph Gürtler und Prof. Walter Leitner in der Kategorie Industrie nominiert
  • CO2 als Rohstoff wirtschaftlich nutzbar gemacht
  • Technologie ist Basis für eine Vielzahl marktfähiger Produkte

Das Europäische Patentamt (EPA) hat die Nominierung der deutschen Chemiker Dr. Christoph Gürtler (Covestro AG) und Prof. Walter Leitner (Max-Planck-Institut für Chemische Energiekonversion und RWTH Aachen) als Finalisten in der Kategorie „Industrie“ des Europäischen Erfinderpreises 2021 für ihre Rolle bei der Entwicklung einer neuen Technik zur Verwendung von Kohlendioxid (CO2) bekanntgegeben. Die Technologie ermöglicht es, das schädliche Klimagas CO2 als wertvollen Rohstoff für nachhaltige Kunststoffe zu nutzen. Das Verfahren verwendet chemische Katalysatoren, um Reaktionen zwischen CO2 und einem herkömmlichen Rohstoff anzutreiben. Dabei entstehen sogenannte Polymere  auf nachhaltigere und wirtschaftlich tragfähige Weise. Das CO2 ist dabei fest eingebunden.

  • Dr. Christoph Gürtler und Prof. Walter Leitner in der Kategorie Industrie nominiert
  • CO2 als Rohstoff wirtschaftlich nutzbar gemacht
  • Technologie ist Basis für eine Vielzahl marktfähiger Produkte

Das Europäische Patentamt (EPA) hat die Nominierung der deutschen Chemiker Dr. Christoph Gürtler (Covestro AG) und Prof. Walter Leitner (Max-Planck-Institut für Chemische Energiekonversion und RWTH Aachen) als Finalisten in der Kategorie „Industrie“ des Europäischen Erfinderpreises 2021 für ihre Rolle bei der Entwicklung einer neuen Technik zur Verwendung von Kohlendioxid (CO2) bekanntgegeben. Die Technologie ermöglicht es, das schädliche Klimagas CO2 als wertvollen Rohstoff für nachhaltige Kunststoffe zu nutzen. Das Verfahren verwendet chemische Katalysatoren, um Reaktionen zwischen CO2 und einem herkömmlichen Rohstoff anzutreiben. Dabei entstehen sogenannte Polymere  auf nachhaltigere und wirtschaftlich tragfähige Weise. Das CO2 ist dabei fest eingebunden.

CO2 geht nur sehr mühsam chemische Verbindungen ein. Dieses Problem musste das Team um Christoph Gürtler und Walter Leitner lösen. Der Durchbruch gelang durch die exakte Kontrolle der Reaktion zwischen CO2 und dem Erdöl-basierten Propylenoxid in Gegenwart eines maßgeschneiderten Katalysatorsystems.

Das dabei entstehende so genannte Polyol wurde von Covestro unter dem Produktnamen cardyon® zur Marktreife  gebracht. Es wird bereits zur Herstellung von weichem Schaumstoff  für Matratzen, für Kleber in Sportböden, Polsterungen in Schuhen und in Autoinnenräumen eingesetzt. An der Schwelle zur Marktreife stehen elastische Textilfasern. Forschungsprojekte haben erfolgreich gezeigt, dass sich CO2 auch für Dämmstoffe aus Hartschaum und für Tenside, zum Beispiel in Waschmitteln, nutzen lässt.

 

More information:
polyol CO2
Source:

Covestro AG