From the Sector

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

• Anforderungs- und passformgerechte textile 3D-gestrickte Mund-Nasen-Masken – Weitere Initiativen am ITM der TU Dresden

Seit dem 20. April 2020 gilt für das Bundesland Sachsen eine Maskenpflicht beim Einkaufen und im öffentlichen Personen- und Nahverkehr. Eine entsprechende Verordnung wurde hierfür am 17. April 2020 vom Freistaat Sachsen bekannt gegeben.

Aufgrund der neuerlassenen Allgemeinverfügung und der damit einhergehenden, notwendi-gen Schutzmaßnahmen zur Verringerung der Ausbreitung von COVID-19 wird das Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden nach der am 20. April 2020 erfolgten Wiederaufnahme des laborbasierten Forschungsbetriebes die bereits in der ITM-Pressemitteilung vom 31. März 2020 vorgestellte textile, 3D-gestrickte Mund-Nasen-Maske intensiv weiterentwickeln. Das ITM möchte damit einen wichtigen aktiven Beitrag zum Schutz der Gesundheit der Bevölkerung leisten.

Hierfür sind in den letzten Tagen die Kooperationen mit langjährigen Netzwerkpartnern des ITM wei-ter intensiviert worden. Gemeinsam mit der renommierten Textilmaschinenfirma H. Stoll AG & Co. KG aus Reutlingen ist es gelungen, mit dem am ITM erarbeiteten technologischen Know-how auf einer am ITM der TU Dresden installierten Flachstrickmaschine Stoll ADF 530-32 BW weitere Vari-anten neuartiger, textiler 3D-gestrickter Mund-Nasen-Masken erfolgreich umzusetzen.

Am ITM können somit Mund-Nasen-Masken-Varianten mit unterschiedlichsten Materialkombinatio-nen auf Flachstrickmaschinen von zwei Maschinenherstellern, die sich alle als waschbarer und damit wiederverwendbarer Mund-Nasen-Schutz eignen, anforderungs- und passformgerecht gefertigt wer-den. Je nach Materialzusammensetzung sind die Mehrwegmasken für Kochwäsche mit handelsübli-chen Waschmitteln bzw. bei 60° mit Desinfektionswaschmittel geeignet. Bei den Masken kann wahl-weise eine Tasche direkt im Fertigungsprozess integriert werden, in die temporär noch zusätzlich Fil-terstrukturen eingelegt werden können. Die gestrickten Mund-Nasen-Masken sind – intuitiv, schnell, unkompliziert in der Handhabung – auch für Brillenträger geeignet und erfordern beim Anlegen keine Hilfe einer weiteren Person. Mittels weiterer anforderungsgerechter Materialkombinationen können auch spezifische Eigenschaften, wie z. B. Atmungsaktivität, Tragekomfort und Hautverträglichkeit, ge-zielt eingestellt und diesbezüglich im Rahmen erster freiwilliger Versuchsreihen mit Mitarbeitern des ITM intensiv getestet werden.

Als eines der weltweit führenden Textilforschungsinstitute wird das ITM mit der lösungssystemati-schen Entwicklung anforderungsgerechter Mund-Nasen-Masken einen wichtigen gesellschaftlichen und nachhaltigen Beitrag für das Gemeinwohl der Bevölkerung leisten. Das Team des ITM, welches maßgeblich bei der Maskenentwicklung involviert ist, freut sich daher auf weitere Anfragen von Her-stellern und Produzenten, um mit dem erarbeiteten Fachwissen bzw. Erfahrungen und technologi-schem Know-how insbesondere die KMU der deutschen Textilindustrie beratend zu unterstützen und ggf. gemeinsame Allianzen/Kooperationen zu schmieden.

Bereits jetzt schon steht das ITM mit mehreren Industriepartnern in Kontakt, um die Technologie zur Fertigung von textilen 3D-gestrickten Masken schnell in die Serienproduktion zu überführen und dar-über hinaus diese anforderungsgerechten textilen Produkte auch zeitnah als nach den geltenden Standards bzw. Richtlinien zugelassene Schutzmasken anzubieten.

Für die zielführenden Untersuchungen mit variablen Materialkombinationen zur weiteren Op-timierung der unterschiedlichen Maskenvarianten wurden dem ITM bereits verschiedenste Versuchsmaterialien kostenfrei zur Verfügung gestellt. Das ITM bedankt sich hierfür bei folgenden Firmen: EMS-CHEMIE AG, Gebrüder Otto GmbH & Co. KG, TWD Fibres GmbH und W. Zimmermann GmbH & Co. KG.
 

• All motions approved
• Dividend of CHF 4.50 agreed
• COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office.
Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2019, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

COVID-19
At present, it is not possible to predict how the global COVID-19 pandemic will affect Rieter’s sales and earnings in the first and second half of 2020, and thus also for 2020 as a whole.

Rieter therefore refrains from providing an outlook for financial year 2020 and will issue the relevant information as part of the semi-annual report on July 16, 2020.
The company has taken the necessary measures to protect employees and to meet commitments to customers as far as possible.

Thanks to long-standing customer relationships, a focus on innovation, global positioning and the company’s financial stability, Rieter will successfully overcome the challenges.

Pinko is glad to announce that its Chinese subsidiary, Cris Conf Retail, received from the highest office in the Shanghai municipality the “Shanghai Multinational Company Headquarter” certification.

At the presence of Shanghai mayor, Gong Zheng, Cris Conf Retail obtained this status thanks to its investment projects for the creation of a central headquarter in the Chinese city, which will be the primary hub for the management and commercial development of Pinko’s operations across the Asian market. Through this important recognition, Pinko and its parent company Cris Conf confirm the strategic importance of the Chinese market in the brand’s global internalization process.

Thanks to the “Shanghai Multinational Company Headquarter” certification, Pinko will have access to a range of benefits in China, including facilitated import and custom procedures, as well as expedited clearance for the company’s staff upon arrival in China and a direct channel of communication with Chinese national offices.

Pinko currently operates 72 stores in China, located in the most important cities and at the most prestigious malls and department stores.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement from NCTO President and CEO Kim Glas today in response to the administration’s plan to institute a 90-day deferral on MFN tariffs,  as reported by numerous press outlets.

The reported plan being pushed by the importing and retailing industries would defer certain tariffs, including those on finished apparel products. It is an ill-advised policy that will hurt the U.S. textile industry at the very time it is answering the call of the nation to produce medical supplies to battle the coronavirus pandemic. 

These unnecessary tariff concessions would benefit importers and retailers at the direct expense of manufacturers on the front lines of the COVID-19 response and send a demoralizing message.

Tariff deferrals would severely exacerbate ramifications for the U.S. economy, manufacturers and workers and open the floodgates for imports.

If the U.S. government makes tariff concessions during this crisis, it will be inviting a virtual tsunami of imports further devastating domestic manufacturing as it attempts to regain its footing.     

We urge the administration to abandon any moves to defer tariffs on finished products. It would only serve to allow importers to exploit the current crisis, while dealing a severe blow to U.S. manufacturing and its workers.  

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

• U.S. employment in the textile supply chain was 585,240 in 2019. 
• The value of shipments for U.S. textiles and apparel was $75.8 billion in 2019. 
• U.S. exports of fiber, textiles and apparel were $29.1 billion in 2019. 
• Capital expenditures for textile and apparel production totaled $2.5 billion in 2018, the last year for which data is available.

New Mimaki 3DGD-1800 3D printer boasts ground-breaking production speeds and transforms production of large-sized objects, opening up a wide range of new possible applications across industries from sign and display to manufacturing.

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, today announces the launch of the new Mimaki 3DGD-1800 3D printer, facilitating large-scale production up to three times faster than with conventional Fused Filament Fabrication (FFF) type 3D printers. The Mimaki 3DGD-1800 3D printer connects the company’s 2D printing expertise and 3D technology innovations, providing customers with a cost-effective, total solution for 3D sign and display applications.

Capable of producing objects up to 1.8 metres tall in just seven hours – with its assembly-based design allowing for the creation of even larger designs – the innovative 3D printing system boasts a number of clever time- and cost-saving features, including dual-head configuration to enable the simultaneous output of two structures. The Mimaki 3DGD-1800 also facilitates the production of support-free hollowed structures, further streamlining production whilst allowing for increased portability and the possible addition of interior illuminations. The technology will open up a diverse range of potential applications, from signage, events and creative art through to interior design. Customers can utilise Mimaki’s extensive portfolio of 2D print solutions to cost-effectively decorate these applications, opening doors to a range of new products that combine creativity and innovation with Mimaki’s tried and tested vibrant, high-quality results.

Commercially available from April 1, 2020, the new Mimaki 3DGD-1800 is set to revolutionise the way in which large-sized objects are created, enabling a switch from costly and time-consuming conventional handcrafting methods which require significant expertise, to effortless, high-speed production utilising 3D data. 

Coalition of Iconic American Apparel Brands & Textile Companies Heeds Call of Nation to Produce Medical Face Masks

A coalition of iconic American apparel brands and textile companies, responding to the urgent call of the White House for medical supplies, have come together to build a supply chain virtually overnight and fast-track the manufacturing of medical face masks to help hospitals, health care workers and citizens battling the spread of the COVID-19 disease.

Parkdale Inc.-- the largest yarn spinner in the U.S. headquartered in North Carolina—helped lead the effort to build the coalition with Hanesbrands, Fruit of the Loom and six other companies to set up a manufacturing supply chain and begin ramping up production of the masks.

The coalition consists of iconic American brands such as Hanesbrands and Fruit of the Loom, often competitors in the marketplace, who are banding together for the greater good of a nation facing one if its most monumental challenges.

American Giant, Los Angeles Apparel, AST Sportswear, Sanmar, America Knits, Beverly Knits and Riegel Linen are also part of the coalition working tirelessly to respond to a national emergency in the nation’s time of need.

Dr. Peter Navarro, assistant to the President and director of the White House Office of Trade and Manufacturing Policy, worked with the coalition and helped expedite the production of these masks. The first face masks have been approved by the U.S. Department of Health and Human Services.

The companies expect to begin production on Monday and will make the first deliveries by mid-week.

They are dedicating their assets, resources and manufacturing capacities to create a high output of facemasks. Once fully ramped up in four to five weeks, the companies expect to produce up to 10 million facemasks per week in the United States and in Central America.

If companies are interested in dedicating resources to help the cause, please reach out to the National Council of Textile Organizations at kellis@ncto.org

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers.
 

• U.S. employment in the textile supply chain was 594,147 in 2018.  
• The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.  
• U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.  
• Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.

Textile and nonwoven associations issued a joint statement today urging federal, state and local governments to deem textile and nonwoven manufacturing facilities as “essential” when drafting “Shelter in Place” orders in response to the COVID-19 crisis.

Our associations recognize the serious challenges our elected officials, health administrators, and others are facing when issuing orders to protect communities across the country and we understand the necessity for leaders to enforce a ‘Shelter in Place” order or quarantine orders.

Our members make a broad range of inputs and finished products used in an array of personal protective equipment (PPE) and medical nonwoven/textile supplies, including surgical gowns, face masks, antibacterial wipes, lab coats, blood pressure cuffs, cotton swabs and hazmat suits. These items are vital to the government’s effort to ramp up emergency production of these critical supplies.

If workers who produce these goods are not granted an “essential” exemption from “Shelter in Place” and other quarantine orders to go to their manufacturing and distribution facilities, it will cause major disruptions in the availability of these goods. This will create significant hardship to healthcare providers and consumers across the country who depend on steady and stable supplies of these critical items.

We are asking the administration and state and local authorities to provide greater certainty and clarity for our companies and employees and ask for a clear exclusion of our manufacturing operations from “Shelter in Place” orders as the textile and nonwoven products that we make in the U.S. play an essential role in mitigating the shortages of critical supplies. Such a designation will help us avoid disruptions of vital goods and services during this challenging time.

The U.S. textile and nonwoven associations NCTO, IFAL and INDA issued a joint statement today urging federal, state and local governments to deem textile and nonwoven manufacturing facilities as “essential” when drafting “Shelter in Place” orders in response to the COVID-19 crisis.

The associations recognize the serious challenges of the elected officials, health administrators and others are facing when issuing orders to protect communities across the country and show understanding for the necessity to enforce quarantine orders.

The members of these associations are part of the production of personal protective equipment (PPE) and medical nonwoven/textile supplies, including surgical gowns, face masks, antibacterial wipes, lab coats, blood pressure cuffs, cotton swabs and hazmat suits. These items are vital to the government’s effort to ramp up emergency production of these critical supplies.
If workers who produce these goods are not granted an “essential” exemption from “Shelter in Place” and other quarantine orders to go to their manufacturing and distribution facilities, it will cause major disruptions in the availability of these goods, states the association. This will create hardship to healthcare providers and consumers across the country who depend on steady and stable supplies of these critical items, says the NCTO.

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Stemming from the mill’s holistic vision, R-TWOTM represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its environmental performance. With the goal to create fabrics that can provide both quality and responsibility, ISKO has developed this platform, which deals with the most critical issue that apparel supply chains are currently faced with: using more than what actually needed.