From the Sector

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

The multi-rotor Tiger Drones typically carry spraying equipment and can also carry high definition cameras that provide a wide range of field information. Farmers can measure land profiles, identify any problem plants or areas and manage their cultivation in the most efficient way. The 420 mm square shaped fuselage cover protects the drone’s electronic controls and forms an aerodynamic fairing between the central fuselage and the craft’s 4 rotor arms.
 
The COBRA Design and Development team selected a composite laminate of glass fibre reinforcements for the cover – which don’t interfere with GPS signals used by the drone - and combined these with epoxy laminating resins in a hand laminated, vacuum bag consolidated production process.

COBRA also designed all of the mould tools for the project. The 2-piece aluminium mould was produced by one of COBRA’s long-term tooling partners. This metallic tooling provides an excellent surface finish to the part with absolutely minimal trimming and finishing required.   Moulded parts can go swiftly through a painting and clear coating process before final inspection and delivery to the client.

Danu Chotikapanich, CEO of COBRA International comments: “Our collaboration with HG Robotics is going well, and we are hoping to collaborate further with them on other multi-rotor and fixed wing VTOL (vertical take-off and landing) drone models in the future. These are COBRA’s first parts for the agricultural industry, and they provide an exciting vision as to just a few of the possibilities for lightweight composites in this area and also in the wider commercial UAV market as a whole.”

• Customer Story
• Technology takes uniform making to the next level
• To meet new challenges in the professional garment market and preserve over a century of savoir-faire, Balsan chose Lectra to modernize its production tools.

The challenge

A Groupe Marck company, Balsan designs and manufactures corporate and ceremonial clothing, tailored and customized uniforms, and personal protective equipment and clothing for the public and private sector which comply with international standards. The biggest challenge is to meet the new expectations of customers who seek increasing levels of customization with ever-shorter time-to-market deadlines.
The professional garment sector is subject to the same pressures as prêt-à-porter, and Balsan’s challenge was to produce customized clothing more quickly using intelligent manufacturing methods.

Results

Balsan was a pilot partner for the Fashion On Demand by Lectra solution. This alliance allowed Groupe Marck to take a new approach, involving not only the use of Fashion On Demand by Lectra’s connected cutter, but upstream software solutions as well, which are configured based on the company’s needs to best match its work methods while updating and accelerating the production process. “Using a measurement chart, Fashion On Demand by Lectra allowed us to generate well-adapted and customized patterns with which to produce our garments. The solution also provides extensive flexibility: we can send the model to the cutter, select the cutting orders and  even group them by fabric, and detect defects and launch re-cuts when necessary. This improves overall performance and delivers estimated productivity gains of 7%”. Stéphane Quiniou, Industrial and Quality Director, Groupe Marck

Lectra's response

Balsan was a pilot partner for the Fashion On Demand by Lectra solution. This alliance allowed Groupe Marck to take a new approach, involving not only the use of Fashion On Demand by Lectra’s connected cutter, but upstream software solutions as well, which are configured based on the company’s needs to best match its work methods while updating and accelerating the production process.

The new generation of smart - and water saving! – cotton, an innovative brand-new collaborative business model bringing companies together to create smart and sustainable collections for the wardrobe, a textile ‘bank’ to inspire and empower creatives committed to design responsible fashion and more…

C.L.A.S.S. – the acronym for Creativity Lifestyle and Sustainable Synergy - is the global resource for smart material innovation, education, marketing and communication. Founded by Giusy Bettoni - entrepreneur, innovator as well as Première Vision’s sustainability consultant - the platform has become an influential player supporting leading textile and fashion companies to develop, establish and narrate their true sustainable commitment. In Paris, C.L.A.S.S. will bring forward its vision and strategy with a set of initiatives, talks and projects.

“For the third time, we will join Première Vision’s SMART CREATION district with a triple mission: providing all strategic tools to trigger change, raising awareness on sustainability and bringing companies and professionals together to share the ultimate smart innovation.” Explains Giusy Bettoni.

With the announcement of the eligible vehicle models, the World Car Awards 2020 kickedoff today at the IAA Motor Show in Frankfurt, Germany. This year again, the majority of contenders is equipped with lightweight components for acoustic and thermal management from Autoneum. The world’s leading automobile industry awards will be presented at the New York Motor Show in the spring of 2020.

A total of 46 new vehicle models have passed the initial screening and are now contenders for trophies in the categories “World Car of the Year”, “World Luxury Car”, “World Performance Car”, “World Urban Car” and “World Car Design of the Year”, including five new fully-electric models alone. Whether it’s a lightweight underbody, a noise-absorbing carpet system or a heat-reducing engine encapsulation – most of the eligible vehicles benefit from Autoneum’s innovation leadership in thermal and acoustic management. Autoneum’s expertise extends to new forms of mobility such as electric vehicles: Also thanks to numerous Autoneum components, Jaguar’s fully-electric SUV “I-PACE” impressed the jurors for the World Car Awards 2019, which was the first model ever to be named “World Car of the Year”, “World Car Design of the Year” and “World Green Car” at the same time.

On the occasion of today’s eligibility announcement, Autoneum CEO Martin Hirzel said: “Once again, the contenders are testimony to our innovation leadership. The World Car Awards also confirm our forward-looking approach: Nominated e-models feature Autoneum components as well. Welcoming our industry’s transformation early on, we today supply environmentally sustainable, lightweight components for most electric models available worldwide.”

Gerry Malloy, President of the World Car Awards Association, added: “As a market leader, Autoneum is the ideal partner for us. Our shared commitment to innovation was a decisive factor in forming a partnership back in 2014. Nowadays, this is a crucial aspect for manufacturers and suppliers who wish to remain successful in times of industrial and technological change.”

The World Car Awards, which have been presented annually since 2004, are the world’s leading nd most widely recognized automotive industry awards. A jury comprising of more than 80 international automotive journalists selects winners in five categories. The winners of the 2020 World Car Awards will be announced in April next year at the New York Motor Show.

• Empowering fashion with responsible R&D, cutting edge finishing and a Made in Italy design imprint

Paris - “The soul of sustainable fashion is an alchemy, a combined commitment and an act of responsibility”. This is the motto ‘embossed’ in the collections and the values of Italian Converter. At Première Vision, the leading manufacturer celebrates its 25th anniversary and presents E.C.O. KOSMOS, a cross-collection, a brand-new ‘green line’ range’ and a winning formula shining a light on the company’s responsible path and unique ‘blend’ for the fashion of tomorrow.

The acronym E.C.O. stands for Ecologic, Conversion, Optimisation; three unique concepts and values that truly embody Italian Converter DNA: sustainability, transformative process and quality improvement.
For over 25 years, Italian Converter creates high-quality materials for some of the leading fashion and accessories brands. “Made in Italy and sustainability are part of our DNA.” Says Costantino Karazissis, founder of Italian Converter. “We believe that responsible sourcing and processes as well as a deep research into new technology pathways and a market-savvy taste for material design must be the starting point.”

At the core of the company’s responsible alchemy is also the constant research for the perfect balance of 100% Made in Italy materials. “We proudly collaborate with 120 skilled employees producing new hybrid material innovations daily, attracting partnerships from the best high-end brands both in Italy and abroad”.

Toupe and brick red E.C.O. Graffiti (100% linen) on E.C.O. Aurora (cotton and AMNI SOUL ECO®)

E.C.O. KOSMOS is entirely traceable, transparent, 100%made in Italy. The collection walks through a very complete and balanced range sustainable materials - from natural to eco high tech ones- that are transformed, enriched and valued in 9 high-tech cutting-edge innovations thanks to the Italian Converter expertise.
•    The natural line starts from bases of cotton bonded with AMNI SOUL ECO®, an enhanced polyamide 6.6 that degrades within 5 years instead of decades, as other conventional ones do.
•    The stretch innovations start from bases in GRS-certified Newlife™, a cutting-edge premium recycled polyester created using a High-Tech Conversion Model. Thanks to a mechanical process, used plastic bottles are turned into a top-quality polymer and yarn which is 100% traceable and 100% Made in Italy. The whole process takes place within a 100 square km area in Piedmont in Northern Italy.
 
All the references make use only of water-based resins and Standard 100 by OEKO-TEX® certified dying. The result, is resistant and transpiring solutions which come with bold and high-performing features, with a soft touch or even with a silky, yet strong, and enveloping feel. The designs range from rustic to contemporary and nod to jacquard, ‘authentic look’ and ‘drill’ hints. An ideal solution for footwear, apparel and leather goods.

Long story short? No compromises. E.C.O. Kosmos reflects design, innovation and responsible values, as well as 100% Italian Converter know-how.
 
“But this is just the beginning,” adds Karazissis. “The next step we are going to implement in the E.C.O. Kosmos cross-collection is a progressive integration of our triple-expertise, processes and R&D.” A sustainable step forward, a leap woven into a deep expertise a story to-be-continued. For a better future, this is for sure.

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, will be showcasing its Meridian laser anilox cleaner at Labelexpo Europe (booth 11C36), held 24 to 27 Sept., 2019, in Brussels. This is the first time the Meridian will be showcased with live demonstrations at this show.

Attendees may visit the PCMC booth anytime to watch as the Meridian quickly deep-cleans anilox cells by using a laser to remove deposited particles inside of the cells. This cleaning technology extends the life of anilox rolls and does not require any chemicals, sodium bicarbonate, polymer beads, water or detergents—making it a sustainable cleaning technology with a very low environmental impact. PCMC’s newest Meridian models are designed for the narrow web market and include a new internal traversing vacuum system.

“We’re very excited to welcome people into our booth to view the new innovations on our Meridian firsthand,” said Rodney Pennings, PCMC’s Printing, Coating and Laminating Sales Director. “I think they’ll be impressed by its technology, speed and effectiveness.”

Young, all-Italian dream-team will lead Pinko to a next level

Pinko looks ahead. Evolution & revolution are the keywords for the new management’s strategies. For the first time, President Pietro Negra will be supported by an all-Italian young team to build the success of the brand from now on. Research and innovation have always been part of the Pinko DNA: once again, they lead the path to cutting edge management.

The Pinko family grows with figures fully trained in the realms of fashion, luxury and retail, the actual Pinko R-evolution kickstart. “We pondered on Pinko’s future,” says Pietro Negra, President of Cris Conf in Fidenza (Parma), which he founded with his wife Cristina Negra and which controls Pinko. “This is just the beginning of a bigger project to be disclosed step by step in the next few months. The company turnover is a crucial point for any family business willing to preserve its independence. We believe in the power of younger generations. Therefore we created an all-Italian team to boost an already successful business model.”

Federico Bonelli, with experiences in Ernst & Young, The Boston Consulting Group and Bain & Company has been appointed General Manager. Emanuele Bianchi, previously in Diesel Coccinelle and Dolce & Gabbana, takes on as Marketing & Communication Director. Cecilia and Caterina Negra, the founders’ daughters and pivotal figures of Pinko’s success, confirm their roles leading respectively the Communication and the Creative department. Caterina Salvador becomes Director of Style and Product after working in Giorgio Armani, Hugo Boss, Calvin Klein, Dolce & Gabbana, Coin. More talents will be eventually hired.

In a strongly declining market, Autoneum increased revenue in local currencies by 1.9% in the first six months of 2019 thanks to numerous model ramp-ups. At CHF 1 156.1 million, revenue in Swiss francs reached the previous year’s level (CHF 1 159.4 million). All four Business Groups outperformed the market. The turnaround program in North America is showing progress, but the persisting operational inefficiencies at two US plants continue to impact the profitability of the entire Group, as already communicated. Accordingly, EBIT fell to CHF 16.4 million in the first semester, while the anticipated negative net result totaled CHF –6.0 million.

The weak global macroeconomic environment, ongoing trade disputes and the resulting uncertainty among car manufacturers and consumers led to a further sharp decline in global light vehicle production in the first half of 2019. In this difficult market environment, Autoneum was able to increase its revenue by 1.9% in local currencies in the first six months compared to the prior-year period, particularly thanks to numerous model ramp-ups. At CHF 1 156.1 million, revenue in Swiss francs reached the prior-year’s level (CHF 1 159.4 million). While the number of vehicles produced in all regions declined, Business Groups (BG) North America, Asia and SAMEA (South America, Middle East and Africa) grew and outperformed the respective market developments, two of them significantly. Only at Business Group Europe did the sharp drop in production volumes among vehicle manufacturers result in fewer call-offs and lower year-on-year revenue.

• With a turnover of EUR 513 million, the CHT Group achieved a 12% increase in sales
• The result was impaired by high raw material costs and currency effects
• Investments remain high - approximately 13 million EUR invested in production sites and new technologies worldwide
• The acquisition in silicone specialties is bearing fruit despite a shortage of raw materials on the market
• 2019 - moderately optimistic business expectations in a difficult market environment

The situation on the world market deteriorated further in 2018, not least due to the intensification of the trade conflict between the USA and China. However, the CHT Group was again able to close the financial year with an increase in turnover. With consolidated sales of 513 million EUR, the previous year's success in the Group was exceeded by 12%.