From the Sector

Reset
11 results
VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

Monforts takes part in Webtalk by VDMA’s textile machinery division (c) Monforts/Pleva
13.05.2021

Monforts takes part in Webtalk by VDMA’s textile machinery division

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

To ensure a constant high quality in coating operations it is necessary to accurately measure and control the amount of chemical being applied, and Pleva’s series 700 devices achieve this via contact-free microwave moisture measurement technology which can be supplied either as single- or three-point units, or as a traversing measurement unit.

The free-to-attend webtalk will take place on May 20th from 2-3pm (CEST) and registration can be made here, along with further information.

Source:

AWOL Media

04.05.2021

C.L.A.S.S.: THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM

How to recognize truly sustainable fashion? How can responsible recycling of garments and fabrics - as well as new formulas for circular economy - make a difference in fighting the climate emergency? These are just some of the topics addressed during THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM, the open-ended program of virtual meetings with some of the most influential fashion and sustainability experts organized by the Museo del Tessuto di Prato in collaboration with C.L.A.S.S. ecohub.

The museum and the international platform that creates awareness and supports professionals who believe in fashion and sustainable textiles have joined forces to talk not only to fashion enthusiasts but to everyone, and explore a hot and often underestimated topic that involves everyday life. The series of meetings deepens and complements the new section entirely dedicated to circular textiles in the museum's Textile Library.

How to recognize truly sustainable fashion? How can responsible recycling of garments and fabrics - as well as new formulas for circular economy - make a difference in fighting the climate emergency? These are just some of the topics addressed during THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM, the open-ended program of virtual meetings with some of the most influential fashion and sustainability experts organized by the Museo del Tessuto di Prato in collaboration with C.L.A.S.S. ecohub.

The museum and the international platform that creates awareness and supports professionals who believe in fashion and sustainable textiles have joined forces to talk not only to fashion enthusiasts but to everyone, and explore a hot and often underestimated topic that involves everyday life. The series of meetings deepens and complements the new section entirely dedicated to circular textiles in the museum's Textile Library.

Like a real symposium, THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM is a conversation arena involving 10 game changers who have been able to innovate not only with high-tech and responsible products and materials but also with new formulas, business models and production systems that respect the planet and people. Among the speakers of the cycle, visionary innovators who generate change at all levels: from the entire production system and beyond to retailers, leading international brands, research companies and communication experts, all the way to the final consumer.

The first appointment is Wednesday, May 13 at 5 pm CEST with the talk THE SUSTAINABLE PERSPECTIVE. True sustainable fashion is a choral and capillary system in which every actor plays a fundamental role. During the meeting, professionals from different fields, from cultural institutions to industrial production, from marketing to retail, will share their perspective on sustainability.

Recycling is the key word in THE SECOND CHANCE, the second meeting scheduled for June 10 h. 5 p.m CEST.

On September 29, also at 5 p.m. CEST, appointment for the talk A TICKET TO FASHION... AND BACK entirely dedicated to the new models of circular economy.

You can register here.

Source:

C.L.A.S.S. / GB Network Marketing & Communication

15.04.2021

New customer portal “Textile Machinery Newsroom” online

The new customer portal “Textile Machinery Newsroom” is now online on the IndustryArena platform. It provides visitors with technical and marketing relevant information in English for textile and nonwovens manufacturers.

IndustryArena as the umbrella platform of Textile Machinery Newsroom is the leading specialist portal for the manufacturing industry with more than 500,000 registered members and 3,000 providers.

The most prominent sections of “Textile Machinery Newsroom” include supplier news, a sourcing service and the webtalks section. From now on, VDMA’s successful “Textile Machinery Webtalks” series that started in summer 2020 will be published and advertised via this portal.

The new customer portal “Textile Machinery Newsroom” is now online on the IndustryArena platform. It provides visitors with technical and marketing relevant information in English for textile and nonwovens manufacturers.

IndustryArena as the umbrella platform of Textile Machinery Newsroom is the leading specialist portal for the manufacturing industry with more than 500,000 registered members and 3,000 providers.

The most prominent sections of “Textile Machinery Newsroom” include supplier news, a sourcing service and the webtalks section. From now on, VDMA’s successful “Textile Machinery Webtalks” series that started in summer 2020 will be published and advertised via this portal.

Companies can now participate and book future-oriented technology webinars either alone, in pairs or in the tried and tested three-part format. All VDMA members (not only companies supported by the Textile Machinery Association), textile research institutes in the EU and EFTA as well as textile and nonwovens manufacturers (customers) with whom VDMA member companies realised a joint project, for example, are entitled to participate.

More information:
VDMA Textile Machinery Newsroom
Source:

VDMA e. V.

02.02.2021

VDMA continues technology webtalks

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Manfred Dobersberger, PureLoop and Wolfgang Hermann, EREMA Engineering Recycling Maschinen und Anlagen will present an integrated shredder extrusion technology for fibrous, textiles scraps, multilayers, films, trays, straps, foam, trays but also polymer mix materials from textiles and even classical thermoplastic composite materials.
  • Axel Hannemann, company Gneuss, offers recycling solutions which enable the fibre manufacturer to use their otherwise worthless fibre waste to substitute virgin material in the manufacture of high-quality fibres.
  • Markus Reichwein, Oerlikon Manmade Fibers: “We at Oerlikon Manmade Fibers describe a cascaded approach into new technologies as well as different material sources outlining your need for versatile solutions.”

After the presentations, the experts will be available to answer the participants' questions. Registration is possible.

Source:

VDMA e.V. Textilmaschinen

04.12.2020

VDMA continues technology webtalks

  • Webtalk on Technologies for Technical Textiles

The next VDMA technology webtalk is scheduled for 9th December 2020, 2.00 pm – 4.00 pm (CET). The topic will be “Technologies for Technical Textiles”.

The presenters and their topics at a glance:

Bena Manasieva Cavus from company Georg Sahm, will show how to add value and performance to your technical yarns with a single end extrusion coating line. Title of the presentation: “Winding and Yarn coating of Technical Textiles”

Janpeter Horn and Dennis Behnken, HERZOG Flechtmaschinen will present new developments in technical braids such as rope braiding/tension members to replace steel wire, medical braids for stents, ligaments, sutures and composites for lightweight construction and near net-shape preforms. Title of the presentation: “New Developments in Technical Braids”

  • Webtalk on Technologies for Technical Textiles

The next VDMA technology webtalk is scheduled for 9th December 2020, 2.00 pm – 4.00 pm (CET). The topic will be “Technologies for Technical Textiles”.

The presenters and their topics at a glance:

Bena Manasieva Cavus from company Georg Sahm, will show how to add value and performance to your technical yarns with a single end extrusion coating line. Title of the presentation: “Winding and Yarn coating of Technical Textiles”

Janpeter Horn and Dennis Behnken, HERZOG Flechtmaschinen will present new developments in technical braids such as rope braiding/tension members to replace steel wire, medical braids for stents, ligaments, sutures and composites for lightweight construction and near net-shape preforms. Title of the presentation: “New Developments in Technical Braids”

Hagen Lotzmann: "At KARL MAYER we work closely with our customers to offer the best cost–benefit ratio. We do this by using our advanced standard platforms as the basis for developing customised solutions." Title of the presentation: “Engineered solutions for technical textiles and composites – from standard application machines to customized systems”

After the presentations, the three experts will be available to answer the participants' questions. Registration is possible.

Source:

VDMA e.V. Textilmaschinen

05.11.2020

VDMA continues technology webtalks

  • Technology webtalk on sustainable denim production

The next VDMA technology webtalk is scheduled for 12th November 2020 (2 pm - 4 pm CET). The topic will be “Sustainable denim production: latest finishing technologies”.

The presenters and their topics at a glance:

Volker Kunzmann, FONG’S EUROPE, will present highly efficient and innovative wet finishing solutions for denim by combining modular systems adapted to the product and customer’s and local specifications.

Hans Wroblowski, A. Monforts Textilmaschinen, will speak about advanced denim finishing technologies with a focus on ecological and economical energy consumption. Furthermore, a new yarn dyeing process will be presented.

Dr. Jürgen Thoms, PLEVA, will present online measuring and control devices for sustainable and cost-effective denim finishing. Latest technologies in straightening, preskewing, moisture management and quality reporting are shown.

After the presentations, the three experts will be available to answer the participants' questions. Free registration is still possible.

  • Technology webtalk on sustainable denim production

The next VDMA technology webtalk is scheduled for 12th November 2020 (2 pm - 4 pm CET). The topic will be “Sustainable denim production: latest finishing technologies”.

The presenters and their topics at a glance:

Volker Kunzmann, FONG’S EUROPE, will present highly efficient and innovative wet finishing solutions for denim by combining modular systems adapted to the product and customer’s and local specifications.

Hans Wroblowski, A. Monforts Textilmaschinen, will speak about advanced denim finishing technologies with a focus on ecological and economical energy consumption. Furthermore, a new yarn dyeing process will be presented.

Dr. Jürgen Thoms, PLEVA, will present online measuring and control devices for sustainable and cost-effective denim finishing. Latest technologies in straightening, preskewing, moisture management and quality reporting are shown.

After the presentations, the three experts will be available to answer the participants' questions. Free registration is still possible.

23.10.2020

VDMA continues technology webtalks

  • Technology webtalk on production and packaging technologies for respiratory protection masks

Frankfurt – The next VDMA technology webtalk on 29th October 2020 (2 pm - 4 pm CEST) will focus on production and packaging technologies for respiratory protection masks (FFP- and surgical masks).

The presenters and their topics at a glance:

Heiko Irlbacher, Schott& Meissner Maschinen- und Anlagenbau: “Our new mask production line for foldable masks - completely Made in Germany - is becoming your new key player to produce FFP1 and FFP2 face masks as well as N95 or KN95 standards."
Title of the presentation: “Sophisticated production line for FFP folding masks – Made in Germany”

Timo Kollmann: Hugo Beck Maschinenbau shows different styles and possibilities for packaging masks in film, singlewise or in stacks. Timo will present best practices and delivered machines as well as future concepts.
Title of the presentation: “How to pack respiratory masks in film”

  • Technology webtalk on production and packaging technologies for respiratory protection masks

Frankfurt – The next VDMA technology webtalk on 29th October 2020 (2 pm - 4 pm CEST) will focus on production and packaging technologies for respiratory protection masks (FFP- and surgical masks).

The presenters and their topics at a glance:

Heiko Irlbacher, Schott& Meissner Maschinen- und Anlagenbau: “Our new mask production line for foldable masks - completely Made in Germany - is becoming your new key player to produce FFP1 and FFP2 face masks as well as N95 or KN95 standards."
Title of the presentation: “Sophisticated production line for FFP folding masks – Made in Germany”

Timo Kollmann: Hugo Beck Maschinenbau shows different styles and possibilities for packaging masks in film, singlewise or in stacks. Timo will present best practices and delivered machines as well as future concepts.
Title of the presentation: “How to pack respiratory masks in film”

Fabrice Ferretti, ANDRITZ Nonwoven and Textile: "Disposable face masks are now important more than ever. ANDRITZ Diatec has developed a fully automatic, high-speed production line for surgical and FFP disposable face masks. Production speed can reach up to 600 pcs per minute."
Title of the presentation: “Fully-automatic, high-speed-production lines for surgical and FFP masks” 

After the presentations, the three experts will be available to answer the participants' questions. Free registration is still possible.

20.08.2020

Energy efficiency in textile dyeing and finishing - VDMA continues technology webtalks

  • Energy efficiency will be the topic of VDMA’s next edition of Textile Machinery Webtalks on 27 August 2020 (2 pm - 4 pm CEST).  

Efficient energy management is of increasing importance in textile dyeing and finishing. Innovative machine designs with minimal water and energy consumption as well as the recovery and use of the heat energy produced in the processes represent valuable potential savings for any modern company.

The presenters at a glance:

  • Energy efficiency will be the topic of VDMA’s next edition of Textile Machinery Webtalks on 27 August 2020 (2 pm - 4 pm CEST).  

Efficient energy management is of increasing importance in textile dyeing and finishing. Innovative machine designs with minimal water and energy consumption as well as the recovery and use of the heat energy produced in the processes represent valuable potential savings for any modern company.

The presenters at a glance:

  • Ludger Sommer, Thies, will show how to manage heat energy in wetprocessing.
  • Benjamin Schnabel, Brückner Textilmaschinen is going to demonstrate how to make one of the most energy consuming processes in textile manufacturing more sustainable, eco-friendly and cost effective.
  • Fabian Buckenmayer, PLEVA Sensors and Controls will inform about the specific opportunities for an energy-efficient textile production via measuring and controlling process parameters.  

After the presentations, the experts will be available to answer the participants' questions. The webtalk series is very well received by the textile industry. During the first three webtalks, VDMA welcomed almost 900 registered participants from more than 50 countries. Registration is still possible.

Source:

VDMA e. V. Textilmaschinen

 

VDMA: Mask production: Nothing runs without textile machinery (c) VDMA Textilmaschinen
21.07.2020

VDMA: Mask production: Nothing runs without textile machinery

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

Source:

VDMA Textilmaschinen

Photo: Shutterstock
18.06.2020

VDMA starts technology webtalks for the textile industry

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

More information:
VDMA
Source:

VDMA 
Textile Machinery