From the Sector

Reset
576 results
Bremer Baumwollbörse, Bremer Rathaus (c) Bremen Cotton Exchange
Bremer Baumwollbörse, Bremer Rathaus
10.02.2020

International Cotton Conference Bremen 2020: keynotes

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

Source:

Bremer Baumwollbörse

The SFL-2000 is the result of a four-year development project (c) AWOL
10.02.2020

ACG Kinna and ACG Nyström teamed up with Juki Corporation


In the latest technology innovation from members of TMAS (the Swedish textile machinery association), ACG Kinna and ACG Nyström have teamed up with Juki Corporation – the world’s leading sewing machine manufacturer – in the development of a new automated line concept that can considerably speed up the production of finished filter bags.

Woven or nonwoven filter bags employed in a wide range of industrial processes may be under the radar as products, but they represent a pretty significant percentage of technical textiles production.

According to a recent report from BCC research, a leading US analyst covering this sector, industrial filtration represented a $555 million market in 2019 and some of the key areas where such filter bags are employed include:


In the latest technology innovation from members of TMAS (the Swedish textile machinery association), ACG Kinna and ACG Nyström have teamed up with Juki Corporation – the world’s leading sewing machine manufacturer – in the development of a new automated line concept that can considerably speed up the production of finished filter bags.

Woven or nonwoven filter bags employed in a wide range of industrial processes may be under the radar as products, but they represent a pretty significant percentage of technical textiles production.

According to a recent report from BCC research, a leading US analyst covering this sector, industrial filtration represented a $555 million market in 2019 and some of the key areas where such filter bags are employed include:

  • Metal fabrication, with effective filtration required for manual and automated welding, thermal cutting, blasting and machining, especially for coolant filtration.
  • The process and energy industries, including foundries, smelters, incinerators, asphalt works and energy production plants.
  • Other key manufacturing fields – often where dust is generated – including the production of timber, textiles, composites, waste handling and minerals, in addition to chemicals, food production, pharmaceuticals, electronics and agriculture.

Line integration
The new SFL-2000 line is the result of a four-year development project between Juki Central Europe, headquartered in Poland, and the two ACG companies.

It is capable of handling a wide range of different filter media, and as an all-in-one solution, can produce high quality and accurate seams to pre-defined parameters, with optional modules allowing for customised constructions.

 

More information:
ACG Kinna ACG Nyström TMAS
Source:

AWOL

Kornit Digital (c) Kornit Digital Europe GmbH
Kornit Digital
07.02.2020

Kornit Digital Brings On-Demand Eco-Fashion Technology to Pure Origin

Exhibit to showcase solutions answering sustainability demands in fashion supply chain
Kornit Digital (Nasdaq: KRNT),  announced that the company is exhibiting at the Pure Origin event, taking place February 9-11 at the Olympia London. Hosted in conjunction with Pure London, Pure Origin is billed as “the UK’s only fashion sourcing show to bring every element of the fashion supply chain together in one location.”

The Kornit exhibit (Stand PO-A4) will call on brands and manufacturers to produce fashion in the most sustainable manner possible, approaching the fashion market with a statement that clothing can be produced on demand, in a profitable manner, without compromising on environmental concerns.

With its unique single-step printing solution and proprietary water-based NeoPigment™ inks, Kornit Digital enables on-demand textile manufacturing in a sustainable way. Furthermore, these solutions provide retail-quality impressions that enable retailers to become e-tailers.

 

Exhibit to showcase solutions answering sustainability demands in fashion supply chain
Kornit Digital (Nasdaq: KRNT),  announced that the company is exhibiting at the Pure Origin event, taking place February 9-11 at the Olympia London. Hosted in conjunction with Pure London, Pure Origin is billed as “the UK’s only fashion sourcing show to bring every element of the fashion supply chain together in one location.”

The Kornit exhibit (Stand PO-A4) will call on brands and manufacturers to produce fashion in the most sustainable manner possible, approaching the fashion market with a statement that clothing can be produced on demand, in a profitable manner, without compromising on environmental concerns.

With its unique single-step printing solution and proprietary water-based NeoPigment™ inks, Kornit Digital enables on-demand textile manufacturing in a sustainable way. Furthermore, these solutions provide retail-quality impressions that enable retailers to become e-tailers.

 

More information:
Kornit Digital Pure Origin
Source:

Kornit Digital Europe GmbH

Mimaki präsentiert u.a. neuen Textil-Hybriddrucker auf der FESPA 2020 (c) Mimaki Europe
Mimaki präsentiert u.a. neuen Textil-Hybriddrucker auf der FESPA 2020
07.02.2020

Mimaki präsentiert u.a. neuen Textil-Hybriddrucker auf der FESPA 2020

Neuer Hybriddrucker der Einstiegsklasse eignet sich sowohl für den Textildirektdruck als auch für den Sublimationstransferdruck und eröffnet somit kleineren Druckdienstleistern potenziell neue Märkte

Wie Mimaki Europe bekannt gab, wird der neue digitale Textil-Hybriddrucker Tx300P-1800 MkII eine der Hauptattraktionen an seinem Stand (7-C20) bei der FESPA 2020 im spanischen Madrid (24. - 27. März) sein. Dank eines einzigartigen, auf Vielseitigkeit ausgelegten Designs ermöglicht der Drucker sowohl Textildirektdruck als auch den Textil-Transferdruck. Mit austauschbaren Auflageflächen und drei verschiedenen Tintenkombinationen bietet er eine bisher unerreichte Flexibilität in einem einzigen System und eröffnet Druckdienstleistern gleichzeitig völlig neue Geschäftsmöglichkeiten.

Neuer Hybriddrucker der Einstiegsklasse eignet sich sowohl für den Textildirektdruck als auch für den Sublimationstransferdruck und eröffnet somit kleineren Druckdienstleistern potenziell neue Märkte

Wie Mimaki Europe bekannt gab, wird der neue digitale Textil-Hybriddrucker Tx300P-1800 MkII eine der Hauptattraktionen an seinem Stand (7-C20) bei der FESPA 2020 im spanischen Madrid (24. - 27. März) sein. Dank eines einzigartigen, auf Vielseitigkeit ausgelegten Designs ermöglicht der Drucker sowohl Textildirektdruck als auch den Textil-Transferdruck. Mit austauschbaren Auflageflächen und drei verschiedenen Tintenkombinationen bietet er eine bisher unerreichte Flexibilität in einem einzigen System und eröffnet Druckdienstleistern gleichzeitig völlig neue Geschäftsmöglichkeiten.

Bisher war der digitale Textildrucker Tx300P-1800 von Mimaki das Vorzeigemodell hinsichtlich Qualität und Preis-Leistungs-Verhältnis. Der auf diesem Modell aufbauende Mimaki Tx300P-1800 MkII bietet jetzt zusätzlich Sublimationstransferdruck und macht somit den Weg frei für vielzählige neue Materialien und Anwendungen. Die Fähigkeit, vielfältige Anwendungen von Modetextilien bis hin zu Raumtextilien und Tapeten mit einem System bereitzustellen, macht den Drucker zu einer idealen Lösung der Einstiegsklasse. Er bietet sowohl kleineren Druckdienstleistern als auch großen Druckereien alle bekannten Vorteile der Digitaldrucktechnologie, die den in der modernen Textildruckbranche noch immer weit verbreiteten analogen Druckmethoden fehlen. Zu den Vorteilen gehören kostengünstigere Kleinauflagen und kürzere Bearbeitungszeiten, die die Technologie gerade für die Erzeugung von Mustern ideal machen.

 

Source:

Mimaki Europe BV

Asia Pacific Rayon  logo Asia Pacific Rayon
Asia Pacific Rayon Logo
24.01.2020

Asia Pacific Rayon Joins World Economic Forum’s Public Blockchain Platform

To Accelerate Public-Private Cooperation in Supply Chain Transparency

Asia Pacific Rayon (APR) has joined the first neutral and public traceability platform capable of visualising blockchain-based supply chain data from multiple companies and sources. It aims to help businesses across industries respond to consumer demands for ethical and environmentally friendly products.
The neutral and safe space for collaboration is provided by the World Economic Forum and created in collaboration with Everledger, Lenzing Group, TextileGenesis™, and the International Trade Centre. APR will contribute to Phase 2 of the initiative which seeks to incorporate more data sources.

“APR has started harnessing the potential of enterprise blockchain technology to enable customers to trace finished products back to the plantation forest origins on a smartphone app. To be able now to connect our data to other similar industry initiatives is a natural next step for APR, as is extending the benefits of our upstream traceability to the rest of the textile value chain.

Enhancing Follow Our Fibre with New Mill Sustainability Dashboard

To Accelerate Public-Private Cooperation in Supply Chain Transparency

Asia Pacific Rayon (APR) has joined the first neutral and public traceability platform capable of visualising blockchain-based supply chain data from multiple companies and sources. It aims to help businesses across industries respond to consumer demands for ethical and environmentally friendly products.
The neutral and safe space for collaboration is provided by the World Economic Forum and created in collaboration with Everledger, Lenzing Group, TextileGenesis™, and the International Trade Centre. APR will contribute to Phase 2 of the initiative which seeks to incorporate more data sources.

“APR has started harnessing the potential of enterprise blockchain technology to enable customers to trace finished products back to the plantation forest origins on a smartphone app. To be able now to connect our data to other similar industry initiatives is a natural next step for APR, as is extending the benefits of our upstream traceability to the rest of the textile value chain.

Enhancing Follow Our Fibre with New Mill Sustainability Dashboard

Launched in mid-2019, APR’s blockchain-based Follow Our Fibre allows customers and stakeholders to scan its viscose product with a user-friendly app to access data that traces the product’s journey from plant nursery to viscose manufacturing and on to seaports. In October 2019, APR announced a collaboration with TrusTrace to integrate Follow Our Fibre with the latter’s T-Trace module. This helps connect APR’s upstream data to downstream textile value chain actors such as yarn and fabric customers and fashion brands.

More recently, a sustainability dashboard tracking key mill environmental performance indicators has been added to Follow Our Fibre. The dashboard presents APR’s performance in its first year of operations where a baseline has been established for quarterly tracking, reporting and continuous improvement.
The performance indicators follow key industry standards being set by ZDHC for Man-Made Cellulosic Fibres (MMCF), as well as the European Union Best Available Technologies (EU BAT).

 

 

Source:

(c) Omnicom Public Relations Group

23.01.2020

autoneum: revenue growth in a declining market

Thanks to numerous new ramp-ups and the favorable portfolio of vehicle models supplied, Autoneum grew organically by 2.5% in a declining market. Adjusted for currency effects, Group revenue in Swiss francs amounted to CHF 2 297.4 million, 0.7% higher compared to the previous year.

For the second consecutive year, fewer vehicles were manufactured worldwide in 2019 than in the prior year. In particular, the persistently weak global economy and ongoing trade disputes have had an impact on vehicle demand. With only about 89 million vehicles produced, the market shrank by almost –6% compared to 2018. Despite this negative trend, Autoneum achieved an organic revenue growth of 2.5% through numerous production ramp-ups and a favorable mix of vehicle models supplied. Revenue consolidated in Swiss francs rose by 0.7% from CHF 2 281.5 million to CHF 2 297.4 million.

Thanks to numerous new ramp-ups and the favorable portfolio of vehicle models supplied, Autoneum grew organically by 2.5% in a declining market. Adjusted for currency effects, Group revenue in Swiss francs amounted to CHF 2 297.4 million, 0.7% higher compared to the previous year.

For the second consecutive year, fewer vehicles were manufactured worldwide in 2019 than in the prior year. In particular, the persistently weak global economy and ongoing trade disputes have had an impact on vehicle demand. With only about 89 million vehicles produced, the market shrank by almost –6% compared to 2018. Despite this negative trend, Autoneum achieved an organic revenue growth of 2.5% through numerous production ramp-ups and a favorable mix of vehicle models supplied. Revenue consolidated in Swiss francs rose by 0.7% from CHF 2 281.5 million to CHF 2 297.4 million.

Revenue growth in North America, Asia and SAMEA region significantly above market The Business Groups North America, Asia and SAMEA (South America, Middle East and Africa) not only outperformed the negative market trend in each case, but also reported higher revenues compared to the previous year. In Europe only, the drop in automobile production caused a decline in revenue of the corresponding Business Group by –5.6% in local currencies. Business Group North America improved its revenue by 7.2% on a currency-adjusted basis, primarily driven by various production ramp-ups of German and Japanese vehicle manufacturers. Despite considerably fewer vehicles being produced in Asia, the Business Group increased its revenue in local currencies by 8.1% thanks to high-volume and new programs of European and Asian automobile manufacturers. Business Group SAMEA continued its growth course. Against the market slump in this region, revenue in local currencies and adjusted for inflation rose by 32.7%. This was mainly due to high-volume export programs in Turkey and South Africa as well as much higher production volumes compared to the previous year in the key SAMEA market of Brazil.

More information:
Autoneum
Source:

autoneum

DOMO Chemicals appoints Yves Bonte as CEO (c) DOMO Chemicals
DOMO Chemicals appoints Yves Bonte as CEO
21.01.2020

DOMO Chemicals appoints Yves Bonte as CEO

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

Gregory De Clerck, Managing Director of Domo Investment Group and Member of the Board of DOMO Chemicals commented, “I would personally like to thank Alex for his leadership in the successful growth and transformation of DOMO from an upstream nylon 6 specialist into a full integrated engineering materials company developing innovative and sustainable solutions in the Polyamide Industry. We are excited to welcome Yves Bonte to DOMO as the new CEO and Chairman of DOMO Chemicals. We believe he is the ideal person to lead the next chapter of the Company’s growth and transformation process. Alex will continue to significantly contribute to the success of new DOMO.”

Yves Bonte joins DOMO from Yara, the leading fertilizer company and a provider of environmental solutions where he held the role of Executive Vice President Industrial recently named New Business since January 2010, and was responsible for a business generating appr. 20% of Yara’s total revenue of 12.9 billion USD. Prior to Yara, he held a variety of business leadership, commercial and operations roles at Lyondell Basel and Exxon Chemicals. Since 2018 Yves is as Board Member of DOMO.

“I have a true passion for innovation and sustainability, and I am thrilled to join DOMO as its next CEO,” Yves Bonte commented. “The Company has established itself as a leader in sustainable polyamide based on its strong technology-driven product portfolio with a solid foundation to further build upon. I believe DOMO is uniquely positioned to support its customers’ manufacturing processes in a cost effective and sustainable manner. The recently announced long-term strategy and planned investment will position DOMO to reach new levels of growth and success.”

More information:
DOMO Chemicals
Source:

Marketing Solutions NV

Monforts: Half a century of excellence (c) A. Monforts Textilmaschinen GmbH & Co. KG
Monforts: Half a century of excellence
20.01.2020

Monforts: Half a century of excellence

The origins of both Industry 4.0 and an awareness of the need for more sustainable manufacturing methods can arguably be traced back to the year 1971.

It was in 1971 that the first microprocessor was introduced by Intel, and also that the first and perhaps now most well-known environmental campaigner, Greenpeace, was founded.

As such, a direct line can be charted from that year to today’s automated textile manufacturing machinery concepts, as well as the drive to develop more increasingly resource-efficient processes.

All of the recent innovations which have been introduced to the market by A. Monforts Textilmaschinen GmbH & Co. KG, for example, are being powered by the possibilities of Industry 4.0 and developed in response to the market demand for more sustainable production.

The origins of both Industry 4.0 and an awareness of the need for more sustainable manufacturing methods can arguably be traced back to the year 1971.

It was in 1971 that the first microprocessor was introduced by Intel, and also that the first and perhaps now most well-known environmental campaigner, Greenpeace, was founded.

As such, a direct line can be charted from that year to today’s automated textile manufacturing machinery concepts, as well as the drive to develop more increasingly resource-efficient processes.

All of the recent innovations which have been introduced to the market by A. Monforts Textilmaschinen GmbH & Co. KG, for example, are being powered by the possibilities of Industry 4.0 and developed in response to the market demand for more sustainable production.

They include the new ‘digital twinning’ capability introduced in 2019 for all Monforts machines, with advanced sensor technologies which make it possible to access comprehensive technical machine data from any location using the company’s Smart Support and Smart Check apps. In addition, the digital twin system provides information on individual wear parts, such as, for example, converters or gears.

These latest developments have been very favourably received by Monforts customers, especially in Europe.

50th anniversary
The very first Heimtextil – the leading trade fair for the home textiles market – was also held in Frankfurt in January 1971 and Monforts customers Bierbaum Group and Konrad Hornschuch AG are amongst the German companies who were there from the very start and have attended every annual show since.

Bierbaum Group, based in Borken, is the company behind the well-known Irisette bedding brand and is celebrating its own 125th anniversary in 2020. It has also introduced products bearing the German government’s new Grüner Knopf textile seal of approval for sustainable production.

As a specialist in synthetic leathers for home surfaces, as well as vehicle interiors, Konrad Hornschuch AG, of Weissbach, has been a member of the €44 billion automotive giant Continental AG since 2016.

Representatives from both companies received memorial trophies at a special presentation held on January 7th during the 50th anniversary Heimtextil show.

The home textiles market remains very strong in Germany, with sales amounting to some €9.6 billion in 2019, according to analyst IFH Cologne.

Global growth
The first Heimtextil in 1971 was a significant success, attracting 679 exhibitors from 26 countries.

This year’s show, however, attracted a total of 2,952 exhibitors from 66 countries, reflecting not only the growth of the home textiles industry, but also the globalisation which has taken place over the last half century.

Monforts now has customers for its advanced finishing technologies around the world, with home textile customers from India and Pakistan being particularly well represented at Heimtextil 2020.

Among stand outs from Indian companies at this year’s show was the 2020 collection of Welspun India’s famous Christy England brand, inspired by botanical studies of the gardens of British stately homes. Welspun towels meanwhile benefit from the company’s HygroCotton hollow core yarn technology, produced by a proprietary spinning method which ensures they become softer, fluffier and more absorbent after every wash.

An equally ground-breaking new technology is being introduced by Trident Group, which is one of India’s largest vertically-integrated home textiles manufacturers and two years ago installed five complete Monforts finishing ranges for its new linen department.

Trident’s patented Air Rich yarns feature pores throughout their cross sections for high breathability and absorbency, as well as rapid drying.

Monforts home textile customers from Pakistan stressed the resource efficiency of their processes and products as a result of investments in advanced technology, and during the show the ‘Sustainable Pakistan’ initiative was announced.

Supported by GIZ, the German Society for International Cooperation, the initiative aims to reshape global perceptions of Pakistan’s manufacturers and their innovations. So far, twenty producers have been carefully chosen to be presented on this global platform and will help rebrand Pakistan’s textile industry at the Heimtextil exhibitions going forward.

Heimtextil’s organiser Messe Frankfurt also announced its own new alliance with the United Nations Office for Partnerships, in order to support the UN’s Sustainable Development Goals.

Constancy
Many things have changed since 1971 and home interiors are certainly no longer predominantly orange and brown – and perhaps unlikely to ever become so again.

It’s clear, however, that there has been a constancy in the push to consistently improve textile technologies, processes and products that may have originated in Europe, but have subsequently spread around the world.

And the significance of both microprocessors and sustainability in 2020 could only have been guessed at back in 1971.

 

Sappi Europe
Sappi Europe
20.12.2019

Sappi joins Cepi in the 4evergreen alliance to boost the contribution of fibre-based packaging

Cepi, the European association representing the paper industry, has announced a new alliance called 4evergreen. The aim of the alliance is to boost the contribution of fibre-based packaging in a circular and sustainable economy that minimises climate and environmental impact. The alliance will increase awareness about the benefits of fibre-based packaging materials, advocate for EU legislation supporting product design for recyclability and call for the development of optimised collection systems and appropriate recycling infrastructures.

The rise of environmental awareness and consumer concerns, as well as the increase of packaging focused regulation, such as the Single Use Plastics Directive, have helped companies to accelerate the development of alternative packaging materials including fibre-based packaging with a view to helping consumers make more climate-friendly choices.

4evergreen was created as a forum to engage and connect industry members from across the fibre-based packaging value chain, from paper and board producers to packaging converters, brand-owners and retailers, technology and material suppliers, waste sorters and collectors.

Cepi, the European association representing the paper industry, has announced a new alliance called 4evergreen. The aim of the alliance is to boost the contribution of fibre-based packaging in a circular and sustainable economy that minimises climate and environmental impact. The alliance will increase awareness about the benefits of fibre-based packaging materials, advocate for EU legislation supporting product design for recyclability and call for the development of optimised collection systems and appropriate recycling infrastructures.

The rise of environmental awareness and consumer concerns, as well as the increase of packaging focused regulation, such as the Single Use Plastics Directive, have helped companies to accelerate the development of alternative packaging materials including fibre-based packaging with a view to helping consumers make more climate-friendly choices.

4evergreen was created as a forum to engage and connect industry members from across the fibre-based packaging value chain, from paper and board producers to packaging converters, brand-owners and retailers, technology and material suppliers, waste sorters and collectors.

“The 4evergreen alliance is important because it was born from an initiative of consumer product industry leaders who recognize the huge potential of fibre-based packaging in a circular economy” said Susanne Oste, VP Innovation and Sustainability at Sappi. “Their customers want sustainable packaging and fibre-based products provide the most climate-friendly solution available. Sappi is proud to play a part in this industry alliance. We have been investing heavily for more than 10 years in cutting edge research into real solutions for the problems that confront our customers. A recent success is the launch of the only fully recyclable confectionary wrapper on the market today.”

More information:
Sappi Europe
Source:

Sappi Europe

Sappi Seal range with two new basis weights added (c) Sappi Europe
Sappi Seal range with two new basis weights added
16.12.2019

Sappi Seal range with two new basis weights added

Sustainable packaging solutions are a hot topic all over the world. Sappi, market leader in innovative packaging barrier and sealable papers, is already producing such solutions and can point to numerous successful examples. Demand from customers and interested parties from a wide spectrum of industries continues to grow. The world’s leading paper and paperboard manufacturer therefore recently added two new grammages to its Sappi Seal range. In addition to the 67 g/m² version, the new 85 g/m² and 100 g/m² papers enable branded goods manufacturers to package an even more extensive variety of products with this functional paper – either as primary or secondary packaging.

Sustainable packaging solutions are a hot topic all over the world. Sappi, market leader in innovative packaging barrier and sealable papers, is already producing such solutions and can point to numerous successful examples. Demand from customers and interested parties from a wide spectrum of industries continues to grow. The world’s leading paper and paperboard manufacturer therefore recently added two new grammages to its Sappi Seal range. In addition to the 67 g/m² version, the new 85 g/m² and 100 g/m² papers enable branded goods manufacturers to package an even more extensive variety of products with this functional paper – either as primary or secondary packaging.

The requirements for packaging papers are becoming increasingly demanding. They need to offer greater functionality, be environmentally friendly, recyclable and provide optimal protection for the packaged products. While many paper manufacturers are still talking about such multi-functional solutions, the innovation leader Sappi has already expanded its portfolio. The 85 g/m² and 100 g/m² grammages are now available in the Sappi Seal product family. Converters and manufacturers of food products, such as sugar, tea and confectionery, as well as non-food items, like children’s toys and DIY products, now have even more possibilities to use this functional paper and move from fossil-based materials to environmentally friendly packaging. The wide range of projects that Sappi has already completed for well-known customers, highlight its relevance for the market.

More information:
Sappi Verpackung
Source:

Ruess Group

JV300-160 Plus (c) Mimaki
JV300-160 Plus
16.12.2019

Mimaki Deutschland auf der viscom 2020

Mimaki wird den Messebesuchern der viscom 2020 (7.-9. Januar in Düsseldorf) einen Einblick in sein Portfolio an kostengünstigen und profitablen Inkjet-Drucklösungen präsentieren. Unter dem Motto „Join the colourful experience“ wird Mimaki zeigen, wie Werbetechniker, Textil- und Digitaldruckdienstleister mit neuster Technologie attraktive Druckanwendungen erstellen und neue, profitable Märkte erschließen können. Auch für Fachbesucher der parallel zur viscom 2020 auf dem Düsseldorfer Messegelände stattfindenden PSI und PromoTex Expo wird dieses umfassende Sortiment an Lösungen und Anwendungen sehr attraktiv sein.

Mimaki wird den Messebesuchern der viscom 2020 (7.-9. Januar in Düsseldorf) einen Einblick in sein Portfolio an kostengünstigen und profitablen Inkjet-Drucklösungen präsentieren. Unter dem Motto „Join the colourful experience“ wird Mimaki zeigen, wie Werbetechniker, Textil- und Digitaldruckdienstleister mit neuster Technologie attraktive Druckanwendungen erstellen und neue, profitable Märkte erschließen können. Auch für Fachbesucher der parallel zur viscom 2020 auf dem Düsseldorfer Messegelände stattfindenden PSI und PromoTex Expo wird dieses umfassende Sortiment an Lösungen und Anwendungen sehr attraktiv sein.

Im Mittelpunkt des Standes von Mimaki (Halle 13, Stand F41) werden der JV300-160 Plus und der CG-160FXll Plus aus der brandneuen Plus-Serie von Mimaki stehen, seine branchenweit anerkannten Druck- und Schneidelösungen der nächsten Generation für das Großformat. Der JV300-160 Plus und der CG-160FXII, die erstmals in Deutschland zu sehen sein werden, zeichnen sich durch weitaus höhere Produktivität als Vorgängermodelle aus und bieten eine hervorragende Druckqualität bei höherer Druckgeschwindigkeit. Ermöglicht wird das durch MAPS4, die neueste Version des Mimaki Advanced Pass Systems. Mit einem speziellen Algorithmus berechnet MAPS4, wie Tintentropfen am besten so aufgesprüht werden können, dass sichtbare Streifenbildung vermieden wird. Zuverlässige Produktivität gewährleisten Mimakis bahnbrechende Technologien NCU (Nozzle Check Unit; Düsenprüfung) und NRS (Nozzle Recovery System; Düsenwiederherstellung). Eine brandneue, innovative Aufnahmeeinheit soll das Handling von Rollen von bis 45 kg ermöglichen und gleichzeitig das Verrutschen des Materials verhindern, wodurch ein reibungsloser, effizienterer Produktionsprozess gewährleistet ist.

Source:

Mimaki Europe B.V.

(c) Genesis:M&J
06.12.2019

GENESIS:M&J Group targets high fashion denim market in EU

The Bangladesh international player presents its unique eco-innovation path and a specialhigh-end capsule collection in collaboration with PG DENIM.

GENESIS:M&J Group comes back at the Denim Première Vison London (3-4 December) marking a positive end of the 2019, with new objectives for the future. The leading facility of the Group has affirmed itself as one of the most reliable international garment manufacturer, especially in denim market, and now it is time for another leap forward. The aim is to target more in depth the high fashion denim market in Europe with renowned proposals towards a more authentic, comfortable and sustainable denim offer.

The Bangladesh international player presents its unique eco-innovation path and a specialhigh-end capsule collection in collaboration with PG DENIM.

GENESIS:M&J Group comes back at the Denim Première Vison London (3-4 December) marking a positive end of the 2019, with new objectives for the future. The leading facility of the Group has affirmed itself as one of the most reliable international garment manufacturer, especially in denim market, and now it is time for another leap forward. The aim is to target more in depth the high fashion denim market in Europe with renowned proposals towards a more authentic, comfortable and sustainable denim offer.

The first output to underline the new approach is the high-end capsule collection realized in collaboration with PG DENIM, that premiered at the show
A collection where the great industrial experience and quality in garment manufacturing of GENESIS meets, in a perfect and inspiring contamination, the 100% Italian artisanal craft and unique interpretation of PG DENIM fabrics. A complete co-branding that has given life to unique garments with dedicated tags and hangtags, to show a fashionable, sustainable and high-quality final output, entirely produced in Bangladesh. The perfect meeting to provide a great example of how this collaborative path with European top-quality player could lead to a new positioning for the company.

The improvements achieved by GENESIS are enhanced also in the s/s 2021 collection with new trends involving eco-conscious fabrics such as organic cotton, recycled fabric and polymer, realizing blends with natural fibers like hemp & linen while working also with a wide variety of biodegradable materials. Technical fibers are also on the spotlight with an increasing importance gained by proofed lightweights such as waterproof. Moods like hyper blue, natural cotton colors, flat bright indigo mid shades or urban grey and reactive layers dominates the feeling of the new collection. In terms of looks and treatments the collection has developed several unique interpretations such as engineered garments, digital laser patterns, wester silhouettes, workwear, soft dyes, contemporary stripes, dirty green cast and eco-acid wash. A kaleidoscopic collection where technology and tradition meet one unique big trend: more sustainable than ever.

More information:
Genesis M&J Group
Source:

Menabò Group

Mayer & Cie. China shows first in-house development at Shanghaitex (c) Mayer & Cie
Mayer & Cie. China shows first in-house development at Shanghaitex
05.12.2019

Mayer & Cie. China shows first in-house development at Shanghaitex

At the Shanghaitex trade fair Mayer & Cie. China (MCN) exhibited its new machine for manufacturing three-thread fleece. The MFC 3.2 is the first in-house development by the German circular knitting machine manufacturer’s Chinese subsidiary. It produces light to heavy linings and is specially geared to processing polyester yarn. The MFC 3.2 will be available from spring 2020; the material it produces is used in sports- and leisurewear.

“Three-thread fleece linings are popular all over the world,” says Marcus Mayer, Mayer & Cie.’s technical director, “albeit with important regional differences. In Europe and America customers appreciate heavier, warm cotton fabrics, whereas in Asia light, fluffy fabrics made of mixed synthetic fibres are preferred. That is why the MFC 3.2 is a major addition to our Chinese portfolio.“

At the Shanghaitex trade fair Mayer & Cie. China (MCN) exhibited its new machine for manufacturing three-thread fleece. The MFC 3.2 is the first in-house development by the German circular knitting machine manufacturer’s Chinese subsidiary. It produces light to heavy linings and is specially geared to processing polyester yarn. The MFC 3.2 will be available from spring 2020; the material it produces is used in sports- and leisurewear.

“Three-thread fleece linings are popular all over the world,” says Marcus Mayer, Mayer & Cie.’s technical director, “albeit with important regional differences. In Europe and America customers appreciate heavier, warm cotton fabrics, whereas in Asia light, fluffy fabrics made of mixed synthetic fibres are preferred. That is why the MFC 3.2 is a major addition to our Chinese portfolio.“

MFC 3.2: Tried and trusted basis, market-specific alignment
The new Chinese three-thread fleece machine is based on the established Mayer & Cie. MBF 3.2, the qualities of which deliver the goods in the MFC 3.2. They include the high quality of material on both sides of the fabric and the production of challenging weaves. At the same time, the Chinese Mayer & Cie. team attached importance to catering for local requirements, first and foremost processing polyester yarns. Thanks to cam parts developed in-house the new machine performs these tasks reliably and efficiently. At up to 30 rpm on a 30-inch diameter cylinder the MFC 3.2 produces three-thread fleece for sports- and leisurewear.

The MFC 3.2 is more than a three-thread fleece machine, however. A conversion kit transforms it into the MSC 3.2 II, the most popular machine in Mayer & Cie. China’s portfolio. The conversion works in both directions, which further upgrades the single jersey machine because “in the highly saturated Chinese single jersey market the fact that the MSC 3.2 II can be converted into a threethread fleece machine is an important selling point,” Managing Director Mayer notes.

More information:
Mayer & Cie ShanghaiTex
Source:

Mayer & Cie GmbH & Co. KG

(c) Sappi Europe SA
26.11.2019

Sappi: Real solutions instead of empty words

A successful autumn season for Sappi at a collection of trade fairs, with exceptional interest shown in innovative packaging papers

Sappi Europe has presented its solutions for sustainable, future-oriented packaging at three trade fairs in the past few weeks. The globally operating paper specialist’s extensive product range has been serving as a benchmark in the industry for years and now includes the functional barrier papers from the Sappi Guard family, the sealable packaging paper Sappi Seal and the folding boxboard Atelier. The showcasing of innovations in sustainable packaging papers will continue at interpack in Düsseldorf in May 2020.

“Environmentally friendly packaging” was the first leading theme of FachPack, which, according to Messe Nürnberg, really had its finger on the pulse. This theme also was given top priority by visitors that were attracted to the Sappi stand, by its wide range of innovative and sustainable application solutions.

A successful autumn season for Sappi at a collection of trade fairs, with exceptional interest shown in innovative packaging papers

Sappi Europe has presented its solutions for sustainable, future-oriented packaging at three trade fairs in the past few weeks. The globally operating paper specialist’s extensive product range has been serving as a benchmark in the industry for years and now includes the functional barrier papers from the Sappi Guard family, the sealable packaging paper Sappi Seal and the folding boxboard Atelier. The showcasing of innovations in sustainable packaging papers will continue at interpack in Düsseldorf in May 2020.

“Environmentally friendly packaging” was the first leading theme of FachPack, which, according to Messe Nürnberg, really had its finger on the pulse. This theme also was given top priority by visitors that were attracted to the Sappi stand, by its wide range of innovative and sustainable application solutions.

Huge demand for specific projects
Almost fifty per cent more branded goods manufacturers, converters, established customers and interested parties visited the FachPack stand in Nuremberg compared to the previous year – with specific projects in mind. For those planning to replace composite packaging with a paper-based solution with integrated functionality, Sappi presented its Sappi Guard barrierpapers and highlighted some related best practice references. This included the packaging solution for a new nut-fruit bar, recently introduced to the market, from a well-known brand manufacturer. The Sappi Guard range includes Sappi Guard M and Sappi Guard MS with a mineral oil barrier (MOB) and a grease barrier of Kit 11 or Kit 7. All Guard papers guarantee very high product safety and can be completely recycled. The integrated heat sealability was the focus of the development of Sappi Seal. René Köhler, Head of Business Development Packaging and Speciality Papers at Sappi, says: “Reducing the consumption of fossil resources in packaging is a major concern for Sappi. On this account, we developed Sappi Seal, a functional paper with integrated heat sealing functionality which is integrated in the form of a dispersion coating on the reverse side of the paper and can replace papers with a PE coating.” Sappi presented a wide range of successfully completed projects in order to demonstrate the specific application of this paper to the trade fair visitors.

More information:
Sappi Verpackung
Source:

Sappi Europe SA

 TOPIC OF THE SEASON: Responsible Future (c) Premium Exhibitions GmbH
Alina Hahn, Marie Sandmann, Maren Wiebus, Damien Winpenny, Marie-Luise Patzelt
21.11.2019

TOPIC OF THE SEASON: Responsible Future

Sustainability is part of SEEK’s internal make-up and has always been part of the team and community experience. Over 80 sustainable brands make up the brand portfolio, including players like Veja, Dedicated and Kings of Indigo. Experts will be sharing their experiences on this market-defining topic as well, with a host of live podcasts, talks and panel discussions, and will be shaping SEEK’s programme of content.
 
BIG PLAYER: the new SEEK Culture

 
SEEK is Europe’s most successful trade show for pop, street and sneaker culture. This is where the key players meet, where the looks of tomorrow are showcased, modelled and retold, where classics are celebrated, authenticity rules the roost and where icons take their positions alongside shooting stars. SEEK is essential participation for anyone looking to curate a modern, youthful and relevant range.

The shift from a niche event to a large trade show is now complete with a new logo and campaign design. SEEK has emerged from its transformation to reveal that its content and visual look are as relevant as ever!  

Sustainability is part of SEEK’s internal make-up and has always been part of the team and community experience. Over 80 sustainable brands make up the brand portfolio, including players like Veja, Dedicated and Kings of Indigo. Experts will be sharing their experiences on this market-defining topic as well, with a host of live podcasts, talks and panel discussions, and will be shaping SEEK’s programme of content.
 
BIG PLAYER: the new SEEK Culture

 
SEEK is Europe’s most successful trade show for pop, street and sneaker culture. This is where the key players meet, where the looks of tomorrow are showcased, modelled and retold, where classics are celebrated, authenticity rules the roost and where icons take their positions alongside shooting stars. SEEK is essential participation for anyone looking to curate a modern, youthful and relevant range.

The shift from a niche event to a large trade show is now complete with a new logo and campaign design. SEEK has emerged from its transformation to reveal that its content and visual look are as relevant as ever!  

Together with creative agencies Karl Anders and Haebmau, the SEEK team has been working for weeks on the brand’s new branding. The result: a visual concept with a strong message.

“The handshake is the right imagery and commitment to our stance and that of the SEEK community.”

“SEEK stands for strength and business just as much as for communality and good vibes! ‘Get Along’ articulates a feeling of agreement, of moving forward and getting to grips with things. We all want to shape a positive future for our industry – as partners and by joining forces.”, explains Fashion Director Maren Wiebus.

CREATIVE CONNECTION: Karl Anders and Haebmau
 
The Hamburg-based agency Karl Anders, which was established by Claudia Fischer-Appelt and Lars Kreyenhagen, was commissioned to come up with the creative concept and design language for the logo and campaign.

“With the new look we are entering a new era for SEEK as a brand. Lots of brands have chosen a design using Helvetica in recent years,” says Claudia Fischer-Appelt, Creative Director at Karl Anders. “We are now signalling a clear shift in another direction. Confident, bold and independent. With the logo we are inviting the viewer to play with the linear layout in their head; we are breaking viewing habits, making a statement and revving things up a gear. SEEK, there it is.”
 
The artwork is the result of a process of in-depth debate with the SEEK brand that took place over several weeks both within the team and also with the support of lifestyle agency Haebmau. Workshops, research and analyses ultimately led to a new, strong brand identity. SEEK is focussed on both established and new players and stands for the WE.

“I have known SEEK since it was in its infancy, so to me it was always like a little brother of the large, successful PREMIUM. Quirky and different, always interesting but somehow not quite so imposing,” says Markus Bublitz, Executive Creative Director at Haebmau. “SEEK today is more grown-up, confident and sharper. Thanks to its position in the market, which it has conquered over the years, it no longer needs to please everyone but can afford to be controversial. This can offer space for new, creative ideas.”

SEEK is edgy, clean-cut and unpolished.

We are all about statement design, new classics, denim and sportswear. SEEK is the trade show event for the fashion community. SEEK knows who calls the shots; it boosts sales and is the place for the next generation of decision-makers to get together. Unlike all the others, SEEK is unconventional and the antidote to boring.

Source:

Premium Exhibitions GmbH

Monforts at Techtextil India (c) Monforts
A recent Monforts texCoat installation.
20.11.2019

Monforts at Techtextil India

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

As a result, India’s Ministry of Textiles is forecasting that the growth of technical textiles in the country will be over 18% annually in the next few years, from a value of US$16.6 billion in 2018 to US$28.7 billion in 2021.

Value addition

High value-added technical products such as wide-width digital printing substrates, carbon fabrics for high-performance composites, filter media, flame retardant barrier fabrics and heavy-duty membranes are now being coated on Monforts texCoat ranges and finished with the company’s industry-leading Montex stenters.

“Since we acquired the technology that our coating units are based on in 2015, we have made a lot of refinements,” says Hans. “All of these developments are reflected in higher coating accuracy and the resulting quality of the treated fabrics. At the same time, our latest multi-functional coating heads offer an unprecedented range of options, with a wide range of modules available.”

The texCoat user interface is now equipped with the unique Monforts visualisation system and the magnetic doctor blade has greater power reserves. Options include a carbon fibre-reinforced composite coating drum with a more scratch-resistant surface and maximum rigidity and remote control which simplifies exact adjustment for the operator.

Montex stenters in special executions are meanwhile ideal for the drying and finishing of both technical woven fabrics and nonwovens and characterised by high stretching devices in both length and width.

“The European-built Montex range of stenters has earned its leading position in the technical textiles market due to the overall robustness, reliability and economy of these machines,” Hans concludes. “Whatever the intended end-product – and we continue to discover potentially new areas in which technical textiles can be utilised all the time – we have the machine specification and know-how to turn ideas into reality. In India we also benefit from the strong sales and service support of A.T.E. Enterprises.”

Texchtextil India takes place alongside World of Composites at the Bombay Exhibition Centre in Mumbai from November 20-22.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG by AWOL Media.

(c) Sappi Europe
04.11.2019

Sappi in partnership with Constantia Flexibles driving forward innovation for sustainable packaging solutions

With the increased global push for environmentally friendly and sustainable paper-based packaging solutions, Sappi has made great strides in developing breakthrough proprietary barrier technology to offer new opportunities to satisfy this need. These unique solutions enabled Sappi to closely collaborate with the world’s largest food and beverage company, Nestlé to support the launch of the YES! snack bar wrapped in recyclable paper. Sappi worked in partnership with Nestlé and packaging supplier, Constantia Flexibles to develop solutions suitable for recyclable paper production processes.

Susanne Oste, Vice President of Innovations and Sustainability at Sappi Europe commented: “Sappi has been working with leading consumer brand owners to develop and supply renewable paper-based packaging solutions understanding and supporting the goals of making their packaging recyclable without compromising on food protection and shelf life. One example of this is the new Sappi Guard range of products providing brand owners with a paper confectionery wrapper to meet market demand for more sustainable products.”

With the increased global push for environmentally friendly and sustainable paper-based packaging solutions, Sappi has made great strides in developing breakthrough proprietary barrier technology to offer new opportunities to satisfy this need. These unique solutions enabled Sappi to closely collaborate with the world’s largest food and beverage company, Nestlé to support the launch of the YES! snack bar wrapped in recyclable paper. Sappi worked in partnership with Nestlé and packaging supplier, Constantia Flexibles to develop solutions suitable for recyclable paper production processes.

Susanne Oste, Vice President of Innovations and Sustainability at Sappi Europe commented: “Sappi has been working with leading consumer brand owners to develop and supply renewable paper-based packaging solutions understanding and supporting the goals of making their packaging recyclable without compromising on food protection and shelf life. One example of this is the new Sappi Guard range of products providing brand owners with a paper confectionery wrapper to meet market demand for more sustainable products.”

More information:
Sappi Constantia Flexibles
Source:

RUESS PUBLIC T GMBH

Bernhard Wiehl, Chief Financial Officer (CFO) (c) Autoneum Holding Ltd
28.10.2019

autoneum: Change to the Group Executive Board

The Board of Directors of Autoneum Holding Ltd appoints Bernhard Wiehl, the longstanding Head of Finance & Controlling of Business Group Europe, as Chief Financial Officer (CFO) and member of the Group Executive Board with immediate effect. The previous CFO Dr Martin Zwyssig has decided to leave Autoneum.

The Board of Directors of Autoneum Holding Ltd appoints Bernhard Wiehl, the longstanding Head of Finance & Controlling of Business Group Europe, as Chief Financial Officer (CFO) and member of the Group Executive Board with immediate effect. The previous CFO Dr Martin Zwyssig has decided to leave Autoneum.

Bernhard Wiehl has been responsible for Finance & Controlling at Business Group Europe since 2013. Also thanks to his financial leadership, this Business Group with its numerous legal units has become highly profitable in recent years. Prior to joining Autoneum, he held senior finance and controlling positions with various automotive suppliers and has therefore extensive experience in the financial management of internationally active suppliers. Additionally, he is very familiar with the challenges of the automotive industry in a global environment. From 2007 to 2013, he was Head of Finance & Controlling and member of the Executive Board of the Lighting and Electronics division at the German automotive supplier Hella and from 2004 to 2007, among other things, in charge of controlling of the Europedivision of the supplier Hydraulik-Ring. Wiehl started his professional career in 1995 at TRW Automotive in Germany. He studied mechanical and industrial engineering at the Esslingen University of Applied Sciences, Germany, and holds a degree in industrial engineering (FH).

Bernhard Wiehl’s predecessor Dr Martin Zwyssig decided to leave the Company and to take up a new professional challenge. The Board of Directors and CEO Matthias Holzammer thank him for the commitment to the Company and wish him all the best for his professional and private future.

Source:

Autoneum Holding Ltd

25.10.2019

GENESIS:M&J at Kingpins Show Amsterdam

A selected supply chain combined with big data model to shape a controlled eco-innovative change, for Bangladesh and the entire sector. The Kingpins Show Amsterdam (23-24 October 2019) is once again the chosen setting for GENESIS:M&J Group to present its highly innovative proposals and latest advancements in the world of garment manufacturing. The strategy behind the new approach of the Group’s leading facility is based on three main pillars: an accurate supply-chain selection, unique sustainable data control with START TO MEASURE™ system improved, and the development of safer work conditions and processes.

A selected supply chain combined with big data model to shape a controlled eco-innovative change, for Bangladesh and the entire sector. The Kingpins Show Amsterdam (23-24 October 2019) is once again the chosen setting for GENESIS:M&J Group to present its highly innovative proposals and latest advancements in the world of garment manufacturing. The strategy behind the new approach of the Group’s leading facility is based on three main pillars: an accurate supply-chain selection, unique sustainable data control with START TO MEASURE™ system improved, and the development of safer work conditions and processes.

Confirming its prestigious partnerships with brands like Diesel, G-Star Raw, Jack & Jones, C&A and Celio, among many others, GENESIS brings on the stage of the world-renowned denim exhibition its vision to drive positive change in the sector. In the ever-changing denim and apparel scenario the company’s strategy aims at leading a forefront approach in major garment manufacturing, relying on high-quality standards and unprecedent technological innovation. The goal is not only to consolidate penetration in European markets, but also to provide an alternative model to fast-fashion standards.

More information:
Genesis M&J Group
Source:

menabo

Kornit Digital (c) Kornit Digital
Kornit Digital
23.10.2019

Kornit Digital Brings On-Demand Apparel, Sportswear, and Home Goods Solutions to PRINTING United 2019

"Fulfillment Hub” presentation will feature collaborations with major brands, thought leadership sessions
Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, has announced the details of its presence at PRINTING United 2019, taking place in Dallas, Texas, October 23-25, 2019.

PRINTING United brings the North American public debut of Kornit’s Konnect software, a cloud software analytics platform that provides users a single comprehensive user interface to monitor and manage their productivity. This empowers customers to receive real-time data about their operations, prioritize, assess costs, troubleshoot, and set goals from the convenience of their laptop, tablet, or smartphone.

 

"Fulfillment Hub” presentation will feature collaborations with major brands, thought leadership sessions
Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, has announced the details of its presence at PRINTING United 2019, taking place in Dallas, Texas, October 23-25, 2019.

PRINTING United brings the North American public debut of Kornit’s Konnect software, a cloud software analytics platform that provides users a single comprehensive user interface to monitor and manage their productivity. This empowers customers to receive real-time data about their operations, prioritize, assess costs, troubleshoot, and set goals from the convenience of their laptop, tablet, or smartphone.

 

More information:
Kornit Digital Printing United
Source:

Kornit Digital Europe GmbH