From the Sector

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

SHIMA SEIKI MFG., LTD. announces the release of its new "SHIMA Datamall™" digital content web service.

SHIMA Datamall™ is an online service that allows users to search, browse and purchase a variety of useful data for the planning, production and sales of fashion items. With SHIMA Datamall, users of the SDS®-ONE APEX series 3D design system, APEXFiz™ Design subscription software and SHIMA SEIKI flat knitting machines will be able to streamline their operations and further promote the digital transformation of textile manufacturing, thereby realizing a shift toward sustainable manufacturing.

Digital content available on SHIMA Datamall™, together with yarn data from the yarnbank™ digital yarn sourcing web service, are meant to support knit manufacturing from planning and design to production and sales, by arranging the data on SDS®-ONE APEX and APEXFiz™.

Membership is not limited to users of SHIMA SEIKI products. Anyone can search and browse from digital data comprising over 6,000 items, free of charge. Information gathered on SHIMA Datamall is useful for product planning and ideas for new collections. SHIMA SEIKI users can furthermore purchase and download data to facilitate communication with suppliers.

EURATEX has just released its Spring report, offering a detailed insight into trade figures for the European textile and apparel industry in 2021. The numbers are encouraging: comparing with the dramatic corona-year 2020, EU exports of textile and clothing articles increased by +10.6%, while imports dipped by -7.5%. As a result, the EU trade deficit improved, even it remains significant (- €48 billion).

Furthermore, import prices went slightly down in clothing and dropped in textiles, following a strong decrease of Chinese import prices of face masks and protective medical supplies.

The boost in exports was mainly due to strong performance on the Swiss, Chinese and US markets. On the other side, EU sales of textile & clothing to the United Kingdom fell sharply (-23%), due to Brexit new requirements, customs’ delays and shortage of truck drivers.  Imports from the EU top supplier, China, plunged by -28%, corresponding to €13 billion. Similarly, textile and clothing imports from the United Kingdom recorded a sharp decrease over the period (-48%, equal to €-3 billion).

Director General Dirk Vantyghem commented: “the 2021 export figures, presented in this Spring report, confirm that EURATEX members have gained momentum; even if energy prices are causing some serious short-term disruptions, our long-term ambition remains to be a world leader on sustainable textiles.”

The international trade dimension is indeed critical for the competitiveness of the European textile ecosystem, and needs to be fully embedded in the EU’s Strategy for Sustainable and Circular Textiles. The Commission insists that “all textile products placed on the EU market, are durable, free of hazardous substances, produced respecting social standards…” This is an essential condition to create a level playing field between all textile and apparel companies, regardless of their production base. With €100 billion of imports, and over 20 billion of “foreign” textile items put on the Single Market, this requires a dramatic upscaling of market surveillance, without however disrupting fluid supply chains.

Looking at the impact of war in Ukraine, EURATEX has strongly condemned the Russian aggression, and offered support to the Ukrainian textile industry. Ukraine offers valuable sourcing opportunities for European textile and apparel brands, as part of a broader nearshoring trend, which seems to emerge from the trade figures.

Indorama Ventures Public Company Limited (IVL) reported a strong 1Q22 result, building on its record FY 2021 performance as the pandemic continued to retreat, driving demand across the company’s global integrated portfolio.

IVL achieved 1Q22 Core EBITDA of US$650 million, up 41% QoQ and 77% YoY, and a 4% increase in production volumes to 3.80 MMT. All three of IVL’s business segments grew as the company’s leading global position benefited overall in an environment of higher crude oil prices, increased ocean freight rates and a strengthening US dollar, led by resurging consumer demand and global mobility.

IVL’s Integrated Oxides and Derivatives (IOD) business benefits from a high crude oil price environment, as its shale gas advantage supports MTBE and MEG margins. As ocean freight rates increase, IVL’s PET and Fibers segments gain due to increased import parity pricing in Western markets, where about two thirds of its portfolio is situated. Management’s agile response to hedging and levying surcharges has helped to partially recuperate the surge in energy and utility costs in Europe as a consequence of the Russia-Ukraine conflict.

The re-opening of economies bodes well for demand across IVL’s portfolio. However, China’s ongoing pandemic lockdowns impacted downstream polyester demand resulting in weakened MEG spreads. IVL’s businesses trade in US dollars and a strengthening dollar has positive impact, reducing conversion costs in emerging economies where IVL has a strong local presence.

Combined PET segment reported Core EBITDA of US$435 million, up 63% QoQ and 67% YoY supported by the reset of PTA/PET contracts at the end of 2021. IVL expects the tight supply-demand environment to continue through 2022, boosted by the upcoming peak summer season.

IOD segment achieved Core EBITDA of US$126 million, up 3% QoQ and 258% YoY as MTBE margins benefited from higher crude oil prices, demand remains strong for downstream products, and as the commissioning of the Lake Charles cracker contributes to earnings in 2022. The integration of the Oxiteno acquisition, completed in April, will bring additional upside to IOD from 2Q22.

Fibers segment delivered Core EBITDA of US$85 million, an increase of 4% QoQ and 17% YoY. Demand across the three Fibers verticals is stable with domestic sales yielding better profitability, while higher freight rates weighed on margins on export volumes from Thailand, Indonesia and India, and increased energy and utility costs impacted European operations.

1Q22 Performance Highlights

• Consolidated Revenue of US$4,444M, an increase of 12% QoQ and 37% YoY
• Record Reported EBITDA of US$784M, a YoY growth of 63%, and Core EBITDA of US$650M, a YoY growth of 77%
• Production volumes up 4% YoY to 3.80 MMT
• Reported Net Profit of THB 14,070M, Core Net Profit of THB 10,578M
• Reported EPS of THB 2.47 (LTM1Q22: 5.98) and Core EPS of THB 1.85 (LTM1Q22:4.96)
• Record Core EBITDA Margin at 15%

• Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

Detail optimisations for more overall performance
The innovation packages have the benefits for customers in focus and were tailored to the respective target groups. Every optimization contained therein leads to a decisive improvement in production. All of the solutions developed can be easily integrated into existing STOLL machines.  

Innovation package Number One
Innovation package Number One will be launched on the market in a few weeks' time and is aimed explicitly at knitters who focus on technical textiles. The focus is on convenience and process acceleration. Simple network configuration, expansion of the number of NP values, extended functionality when loading and saving the pattern and also improvement of handling in connection with Production Management from PPS are just some of the features of the package. "The corresponding updates for the machine control system are available to our customers for download free of charge on Customer_Net. In the future, there will also be a cloud-based offering," explains Erhard Vöhringer.

Innovation package Number Two
Still in the pipeline, included in the Number Two innovation package, are improvements for the maintenance area – regarding the use of lubricants and the maintenance intervals (predictive maintenance) – as well as optimizations in terms of sustainability, for example when it comes to reducing consumption of oil and increasing reliability. These solutions will be suitable for all machine types and applications.
The focus here is on improvements in belt take-down, the import and export of data and support for additional storage feeders.
A physical improvement in handling is promised by the new lighting including mirror directly on the machine.
In addition, the development teams are currently working on optimizing various knitting qualities and increasing user-friendliness. So you can already be curious!

Concentrated innovative power
The STOLL development team, with several hundred engineers and technicians in the fields of electronics, software, patterning, and design, never runs out of topics. Questions like "What is the market looking for? What do customers want?  Which changes do the machines have to meet and which ones do the software control and design program have to meet?" are first discussed, evaluated and debated together as a team and then go into the development phase. "Our customers can be absolutely sure that all our innovations are meticulously tested before we go to market with them" emphasizes Erhard Vöhringer. This also applies to the solutions in the innovation packages.

Small solutions, big impact
STOLL flat knitting machines impress with their great application and production potential. Almost 150 years of extensive practical experience in flat knitting technology - the STOLL company was founded in 1873 - is unique in the industry. As a Business Unit of the KARL MAYER Group, STOLL continues to do everything in its power to inspire its customers with innovative strength. Productive, flexible and reliable - simply STOLL! This slogan has not lost any of its meaning today. Quite the contrary: With the new innovation packages, customers benefit not only from the latest high-tech flat knitting machines, but also from an always up-to-date performance upgrade of their existing machine park.
With its innovation packages, STOLL has found a flexible and very fast way directly to the customer. Anyone who wants to know more about this is cordially invited to this year's trade fairs. STOLL looks forward to seeing you at the KARL MAYER Group stand at ITM (Istanbul), Techtextil (Frankfurt), Techtextil India (Mumbai) and ITMA ASIA. (Shanghai).

Organized by the partnership of Tüyap Fairs and Exhibitions Organization Inc. and Teknik Fairs Inc., the ITM 2022 International Textile Machinery Exhibition will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022. Hundreds of domestic and international exhibitors are looking forward to presenting their newest technologies for the first time at the ITM 2O22 Exhibition. Leading textile machinery manufacturers, global sector investors, and professional visitors are planning to come to the ITM 2022 Exhibition to examine the latest technologies closely.

Trade committees from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations.

The ITM 2022 Exhibition is of great importance for Turkish textile machinery and accessories manufacturers to increase their competitiveness in exports and to sign collaborations that will result in worldwide exports. Leading textile technology brands, which focus on product development and new productions during the pandemic conditions, are looking forward to the ITM 2022 Exhibition to present their products to the market and introduce them to their customers face to face. More than 300 manufacturers will make the world launches of their latest technological innovations at the ITM 2022 Exhibition.

• Low impact of Ukraine war on business performance in 1st quarter
• 12.2% increase in sales to €270.9 million based on growth in all four business units
• Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

Sales development
In the first three months of fiscal 2022, the sales increase of €29.4 million was driven by all four operating business units: Graphite Solutions (+€11.3 million), Carbon Fibers (+€6.6 million), Composite Solutions (+€7.2 million) and Process Technology (+€6.0 million).
In particular, sales to customers in the automotive and semiconductor industries and a significant recovery in the industrial applications segment were key factors in the increase in sales. Sales of the Process Technology business unit to customers in the chemical industry also developed pleasingly. The effects of the war in Ukraine, which has been ongoing since the end of February 2022, had only a little impact on SGL Carbon's sales performance in the 1st quarter.

Earnings development
Despite the increasingly difficult market environment in the course of Q1 2022, associated with temporary supply and production bottlenecks at their customers, temporarily interrupted transport routes, and significantly higher energy prices, SGL Carbon was able to keep the adjusted EBITDA margin almost stable year-on-year at 13.6%.  
Adjusted EBITDA increased by 11.5% to €36.8 million in the reporting period. Higher capacity utilization in the business units and product mix effects contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation. By contrast, higher raw material, energy and logistics costs as of end of February 2022 had a negative impact on earnings. The Carbon Fibers business unit was particularly affected by the energy price increases. One-time expenses of €9.2 million in conjunction with energy transactions burdened the Carbon Fibers business unit in the 1st quarter of 2022.  
To secure our production and delivery capabilities, around 85% of the energy requirements of the entire SGL Carbon for 2022 are price-hedged.
Adjusted EBITDA and EBIT do not include in total positive one-time effects and special items of €8.5 million, among other things from the termination of a heritable building right to a site no longer in use. Taking into account the one-time effects and special items presented as well as depreciation and amortization of €14.1 million, reported EBIT increased by 83.5% to €31.2 million (Q1 2021: €17.0 million). The net profit for the period developed correspondingly and more than tripled from €6.1 million to €21.4 million in a quarter-on-quarter comparison.

Outlook
The sales and earnings figures for the 1st quarter 2022 confirm the stable demand from different market segments. Price increases and volatility in the availability of raw materials, transportation services and energy were largely offset by savings from the transformation program and pricing initiatives at the customers.
For 2022, SGL Carbon continues to expect volatile raw material and energy prices, which were included in their forecast for 2022 at the time of planning. However, there are uncertainties about the extent and duration to which SGL Carbon and the customers will be affected by the impact of the war in Ukraine or temporary supply chain disruptions due to the lockdowns in China. Therefore, SGL Carbon's outlook for fiscal 2022 does not include supply and/or production interruptions at customers or the impact of a possible energy embargo that cannot be estimated at this time.  
SGL Carbon's forecast also implies that factor cost increases can be at least partially passed on to the customers through pricing initiatives. SGL Carbon has also included the revenue and earnings impact from the expiry of a supply contract with a major automobile manufacturer at the end of June 2022 in our forecast.

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

• Honest communication towards customers
• Comprehensive information from suppliers
• Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

Is non-mechanical recycling the answer?
Only about ten percent of all discarded plastics is recycled today, which is of course not nearly enough to achieve a circular plastics economy. Despite ambitions and initiatives to reduce plastics use – replacing the materials with other, more sustainable ones – the “plastic tap” is not expected to be turned off anytime soon. Quite the opposite, which makes raising the recycling rates more important than ever.

Although commercially viable, traditional (mechanical) recycling is afflicted with severe flaws, such as legacy chemicals, quality and functionality issues, as well as the lack of clean and sorted waste streams. The brands cited quality and functionality issues as the main obstacles for using more recycled material in their products.

This opens up for non-mechanical recycling, sometimes referred to as chemical recycling, where the plastic is either dissolved or broken down into smaller building blocks. Harmful additives and other hazardous chemicals can be removed in the process, and a material comparable to virgin plastic can be achieved – at least in theory.

So far, however, non-mechanical recycling technologies are costly, energy-intensive, and often require the addition of a great deal of virgin plastic to work – the very material that needs to be phased out.

The chain of custody models needs to be detangled
Apart from these production issues, there is a wide range of chain of custody models surrounding non-mechanical recycling, including mass balance and book & claim, which enable trade of credits or certificates for recycled material.

This cuts the physical connection between input and output, making it possible for a supplier to sell a material as “100% recycled”, when the actual recycled content could be zero.

This is a major issue for the brands ChemSec has spoken to, who value honest and correct communication towards customers. It turns out, perhaps somewhat surprisingly, that being able to slap a “made from 100% recycled plastic” label on a product is not all that important to brands.

To the brands, a physical connection between input (the discarded plastic waste headed for recycling) and output (the product at least partially made from recycled plastics) is far more important.

A physical connection, along with correct and adequate information from suppliers, as well as clearer standards and guidelines than what is available today, is what brands require to increase the use of recycled material and move us closer to a circular economy for plastics.

With its current position paper, the Industrievereinigung Chemiefaser e.V. takes a stand on the intense discussions about an embargo against Russian natural gas supplies. The association believes that Germany's economic and global political future can only be secured with a strong industrial base and therefore, weighing up all positions and influencing factors and assessing the consequences for labour and the market economy, cannot support a short-term natural gas embargo on Russia.

An interruption of the continuous supply of natural gas would result in immense losses for the chemical fibre companies, which could even lead to the destruction of the industry in Germany. The losses are made up of technical damage caused by an uncoordinated shutdown of plants on the one hand and market-related consequential damage caused by lost production and a lack of product sales on the other.

Depending on the location and size of the plants, a short-term outage due to a lack of natural gas would result in average losses of EUR 5 million/plant. In addition, an ongoing daily loss would have to be expected which could be in the order of e.g. 250 000 EUR/day/plant, depending on the location. Furthermore, restarting the plants is questionable if supply chains could no longer be serviced and customers globally look for other suppliers in the meantime. Thus, entire sites would be at risk. With China's global market share in man-made fiber production already exceeding 70 %, a scenario is more than realistic that China will also take over these supply chains, thus leading to an even greater dependence on China.

The vast majority of power plants used for the production of man-made fibers, especially the highly efficient combined gas-and-steam power plants based on the principle of cogeneration with efficiencies of 90 %, are designed exclusively for the use of natural gas. Quite often, there are no technical facilities for operating gas turbines or steam boilers with fuels other than natural gas. Only in exceptional cases could a switch be made to mineral oil. However, even in these cases, the necessary stockpiling of mineral oil is designed only for a short-term failure of the gas burners. A change to base-load supply with mineral oil could take a time window of between 3 and 56 months, depending on the type of plant and taking into account licensing requirements. The use of hydrogen as an energy source is only possible in the very long term. In the few cases where natural gas can be substituted, investment costs of EUR 250 million/plant can be incurred, depending on the emission level of the converted plant.

A natural gas embargo imposed by the European Union on the Russian Federation would not only mean the cessation of production and the end for man-made fiber producers, but also for other industries such as basic chemicals, paper, metal production and glass and ceramics manufacturing, as well as their related sectors. As the German economic institute Institut der Deutschen Wirtschaft Köln e. V. (IW Köln) concluded in its summary report 40/2022 of April 2022: "No one can accurately predict what future these businesses would then still have in Germany. That would be an unprecedented development."

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”