Textination Newsline

Archive
Reset
9 results
Separating microplastics Photo: H & M Foundation
article as PDF
22.05.2023

Soundwaves to separate microplastics from wastewater

The technology developed by The Hong Kong Research Institute of Textiles and Apparel (HKRITA) with the support of H&M Foundation, can separate microplastics from wastewater using soundwaves. Acousweep is a plug-and-play application. The technology can be easily transported and connected to any wastewater facility. If the technology is implemented at an industrial scale, it will have a significant impact on the fashion industry’s sustainable footprint.
 

The technology developed by The Hong Kong Research Institute of Textiles and Apparel (HKRITA) with the support of H&M Foundation, can separate microplastics from wastewater using soundwaves. Acousweep is a plug-and-play application. The technology can be easily transported and connected to any wastewater facility. If the technology is implemented at an industrial scale, it will have a significant impact on the fashion industry’s sustainable footprint.
 
Microplastic pollution is a globally established problem and a threat to ecosystems, animals, and people. Microplastics come from a variety of sources, including from larger plastic debris that degrades into smaller and smaller pieces, or microbeads in exfoliating health and beauty products, or cleansers such as toothpaste. According to the European Environment Agency the major source of oceanic microplastic pollution, about 16%-35% globally, comes from synthetic textiles. Professor Christine Loh, Chief Development Strategist at the Institute for the Environment, The Hong Kong University of Science and Technology, agrees that this technology has great potential.

Microplastics typically refers to tiny plastic pieces or particles smaller than 5mm in diameter according to the definition of United Nations Environment Programme (UNEP) and the European Union (EU). The new technology can separate microplastic fibre longer than 20 μm, which is 250 times smaller than the typical size. Unlike existing filtration processes, the system enables continuous water treatment and easy collection of microplastic fibres by virtue of its acoustic manipulation technique.

Acousweep utilises sweeping acoustic waves in a specially shaped chamber to physically trap and separate microplastic fibres from wastewater effectively. The whole process is merely a physical collection and separation. No chemical, solvent or biological additives are needed. The separated microplastics drip into a collection tank for further treatment, such as recycling. Acousweep, with a developing lab-scale treatment system of the capacity of 100L of water per hour, can be upscaled in industrial plants. The system can be installed in a container with a processing capacity up to 5-10T per hour. The containerised system can be easily transported and connected to the existing sewage outlets of the wastewater treatment system.
 
Process of Microplastic Fibre Separation:

  1. At one end of the chamber is a transducer that generates a sweeping acoustic wave at ultrasound frequencies. At the other end, there is a reflector, inside which sweeping acoustic waves are reflected and forms standing waves.
  2. When standing waves are applied to the particles in a fluid, an acoustic radiation force traps the particles.
  3. The standing waves then transfer the trapped particles to the reflector side; after that, particles concentrate at the apex of the reflector.
  4. At the apex is a needle valve which is controlled by a sensory system that monitors the concentration of microplastic fibres there. When the concentration is sufficiently high, the sensory system opens the needle valve to let the microplastic fibres drip into a collection tank.
  5. A high temperature can be applied to the collection tank to remove the water, leaving the fibres to agglomerate and form a large mass that can be easily dealt with in future treatment.

Green tech has just taken a leap forward in Hong Kong. Acousweep will help the garment and other industries to stop a highly damaging form of pollution. HKRITA used a new technique to remove the microplastics by using soundwave-based system, preventing them from getting into the sea and being ingested by sea life that can even be ingested by humans along the food chain. Acousweep has the capacity to revolutionize industry, says Professor Christine Loh, Chief Development Strategist at the Institute for the Environment, The Hong Kong University of Science and Technology.

 

More information:
wastewater treatment technologies textile waste industrial wastewater treatment plastic waste microplastic
Source:

The Hong Kong Research Institute of Textiles and Apparel (HKRITA); H & M Foundation

print close
more
Photo Pixabay
article as PDF
16.11.2022

Green chemistry transforms facemasks into Ethernet cables

Swansea University academics have pioneered a process which converts the carbon found in discarded facemasks to create high-quality single-walled carbon nanotubes (CNT) which were then used to make Ethernet cable with broadband quality.
 
The study, which has been published in Carbon Letters, outlines how this new green chemistry could be used to upcycle materials which would otherwise be thrown away and transform them into high value materials with real-world applications. The CNTs produced by this technique have the potential not only to be used in Ethernet cables, but also in the production of lightweight batteries used in electric cars and drones.

Swansea University academics have pioneered a process which converts the carbon found in discarded facemasks to create high-quality single-walled carbon nanotubes (CNT) which were then used to make Ethernet cable with broadband quality.
 
The study, which has been published in Carbon Letters, outlines how this new green chemistry could be used to upcycle materials which would otherwise be thrown away and transform them into high value materials with real-world applications. The CNTs produced by this technique have the potential not only to be used in Ethernet cables, but also in the production of lightweight batteries used in electric cars and drones.

Professor Alvin Orbaek White, of Swansea University’s Energy Safety Research Institute (ESRI):
“Single-use facemasks are a real travesty for the recycling system as they create vast amounts of plastic waste - much of it ending up in our oceans. During the study, we established that the carbon inside the facemask can be used as a pretty good feedstock to make high-quality materials like CNTs.

“CNTs are highly sought-after because they have preferential physical properties and tend to be much more costly on an industrial scale. So, through this study, we demonstrated that we could make very high value materials by processing the CNTs from what are, essentially, worthless waste facemasks.”

The team also studied the energy costs involved in using this process and concluded that the technique was green not only in levels of resource consumption but also in the product value generation as opposed to waste creation. Also, the Ethernet cable produced using the CNTs was good quality and adhered to Category 5 transmission speeds while easily exceeding the benchmarks set for broadband internet in most countries, including the UK.

Professor Orbaek White said:
“Using CNT films in batteries instead of metal films has a lower impact on the environment as the use of carbon offsets the need for mining and extraction activities. This is a crucial piece of work as it contributes to not only a circular economy but is also scalable and is viable for industrial processing and has green chemistry at its core.”

More information:
single-use facemasks face masks textile waste carbon fibers Upcycling Ethernet
Source:

Swansea University

print close
more
Photo: Performance Days
article as PDF
18.10.2022

Eco Award & Performance Award for innovative winter fabrics 24/25

  • Jury presents two awards for outstanding fabric Innovation

The next PERFORMANCE DAYS will take place from November 3-4, 2022 at the MOC Ordercenter in Munich. Visitors also have the opportunity to follow the events online. Thanks to the new platform The Loop, all important information is available all year round, including current trends, new material innovations and extended tools for ease of use. The focus of the curated PERFORMANCE FORUM continues in winter honoring the winners of both awards. This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD.

  • Jury presents two awards for outstanding fabric Innovation

The next PERFORMANCE DAYS will take place from November 3-4, 2022 at the MOC Ordercenter in Munich. Visitors also have the opportunity to follow the events online. Thanks to the new platform The Loop, all important information is available all year round, including current trends, new material innovations and extended tools for ease of use. The focus of the curated PERFORMANCE FORUM continues in winter honoring the winners of both awards. This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD.

Sustainable & innovative: the award winners of the Winter 2024/25 season
As part of the winter edition of the sourcing fairs, the fabric highlights plus accessory trends in the individ-ual categories for the winter season 2024/25 will be on display at the PERFORMANCE FORUM.
 
Particularly striking this year was the high levels of innovation and quality of many submitted fabrics on the one hand, but on the other hand – also as a result of this year’s Focus Topic – the sustainable component. “We wish to enable our visitors to make the best decision in terms of material selection, also in terms of CO2 neutrality and ultimately also in terms of textile recyclability,” states Marco Weichert, CEO of PERFORMANCE DAYS.  

Nevertheless, the road to CO2 neutrality remains a long one, yet the approaches adopted with the Focus Topic ongoing until the coming spring can be seen in a positive light. In general, manufacturers are increasingly relying on the use of natural fibers when possible, such as Tencel™ or other plant fibers – most of them also prove a low CO2 balance during production. The issue of recycling comes with many new facets and wide spanning trends. The portfolio ranges from the recycling of marine waste, such as old buoys, plastic waste or fishing nets, to the recycling of waste from the automotive and computer industries, such as old car tires or computer chips. Natural dyeing methods are also gaining in importance, as is the return of fabrics to the textile cycle.

In the Marketplace, visitors have the opportunity to view over 19,000 products from exhibitors, including the fabric highlights of the individual categories at the PERFORMANCE FORUM. In order for visitors to experience the fabrics in terms of haptics, design and structure in as realistic a form as possible, the PERFORMANCE FORUM has been equipped with innovative 3D technology, including innovative tools such as 3D images, video animations and U3MA data for download.

The jury has also presented two awards for outstanding fabrics for the Winter Season 2024/25 – with the PERFORMANCE AWARD going to Long Advance Int. Co Ltd., and the ECO PERFORMANCE AWARD to PontetortoSpa.

The ECO PERFORMANCE AWARD goes to “9203/M/RC” from PontetortoSpa: High Performance despite maximum sustainability
The fabric is a blend of 23 % hemp, 69 % recycled polyester and 9 % recycled elastane. Moreover, the material boasts a low CO2 footprint during production and focuses on low release levels of microplastics into the environment. “9203/M/RC” belongs to Pontetorto's Techno Stretch organic series, which boast an excellent 4-way stretch with great elasticity. In addition, it guarantees fast drying and optimal breathability. The polyester yarn is manufactured by the mechanical recycling of plastic bottles. Hemp, the most water–repellent among natural fibers, allows for quick drying and provides optimal comfort. Hemp is considered an extremely sustainable natural fiber due to its origin from an anti–bacterial plant that requires neither pesticides nor chemical fertilizers during its growth and consumes extremely little water.

PERFORMANCE AWARD for “LPD-22015-Y4E” from Long Advanced Int. Co. Ltd.: Perfect recycling for top performance
The monocomponent 2layer fabric is a mixture of 45 % polyester mechanical stretch and 55 % recycled polyester from recycled textiles, laminated with a PET Membrane, with a weight of 147 grams.
The special feature of the “LPD 22015-Y4E” is the recycling of fabric and cutting waste. Waste is thus returned to the textile cycle and used to spin new yarn. In the future, manufacturers will have to ensure that all fabric can be recycled. Accordingly, the production of waste is then reduced by 30 % compared to conventional processes. Furthermore, the jury praised the feel and the extraordinary look of the material.

The entire PERFORMANCE FORUM including both awards can be experienced live at the fair on October 26-27, 2022 in Portland, Oregon, and in Munich at the PERFORMANCE DAYS fair on November 03-04, 2022. As of now, all innovative materials can also be found online in the Marketplace of the PERFORMANCE DAYS Loop, with the option to order free samples directly from the exhibitor.

„9203M“ von Pontetorto Spa Photo: Performance Days “LPD22015-Y4E” von Long Advanced Int. Co. Ltd. Photo: Performance Days
More information:
Performance Days Eco Award Performance Award CO2 fabrics
Source:

Performance Days

print close
more
Photo: Pixabay
article as PDF
28.06.2022

Individual plastic budget - Fraunhofer UMSICHT presents study results

When plastics enter the environment, this brings with it many negative effects: these range from suffocating living organisms to transfer within the food chain and physical effects on an ecosystem. In addition, there are dangers from the release of additives, monomers and critical intermediates of metabolic processes, the metabolites.

How great the long-term impact of plastic emissions actually is, is not yet clear at the present time. In order to create a political decision-making basis for dealing with plastic emissions, researchers from Fraunhofer UMSICHT and the Ruhr University Bochum have therefore developed a budget approach and an LCA impact assessment methodology in the "PlastikBudget" project from December 2017 to the end of August 2021. The researchers have now completed the project. The result: When driving a car, a person emits more than half of their individual plastic emission budget through tire wear.

When plastics enter the environment, this brings with it many negative effects: these range from suffocating living organisms to transfer within the food chain and physical effects on an ecosystem. In addition, there are dangers from the release of additives, monomers and critical intermediates of metabolic processes, the metabolites.

How great the long-term impact of plastic emissions actually is, is not yet clear at the present time. In order to create a political decision-making basis for dealing with plastic emissions, researchers from Fraunhofer UMSICHT and the Ruhr University Bochum have therefore developed a budget approach and an LCA impact assessment methodology in the "PlastikBudget" project from December 2017 to the end of August 2021. The researchers have now completed the project. The result: When driving a car, a person emits more than half of their individual plastic emission budget through tire wear.

How big is the long-term impact of plastic emissions?
Six percent of global petroleum consumption goes to the plastics industry - and the trend is rising. While the plastics industry is an important economic factor in many countries, more and more plastic waste ends up in soils and oceans. Mostly in the form of highly mobile, small to large plastic fragments, plastic emissions can no longer be recovered from the environment. At the same time, the long-term effects of plastic in the environment are hardly predictable.

Due to the global and cross-generational dimension of the problem, it is important that science, industry and consumers work together to find a solution. One goal of the joint project PlastikBudget is therefore to quantify today's plastic emissions and to derive a plastic emissions budget. On this basis, the researchers can formulate quantitative emission targets that can be used to legitimize political decisions. In particular, the path from empirically verified data and normative values to a concrete emissions budget forms the core objective of the project.

From research to per capita emissions budget
Starting with a basic research on plastic quantities in the environment, the project addresses two major topics: The development of a budget approach and the development of an impact assessment method that can be used in life cycle assessments to consider potential environmental impacts of plastic emissions. Participatory formats complete the project. In this way, the results are anchored in political and scientific discourse. In the course of the project, the researchers will answer the following questions: What quantities of plastic are currently being discharged and what quantities have already accumulated? What quantities of plastic in the environment are still acceptable? How long does it take for plastics to degrade in real environmental compartments? How are the risks posed by different plastic emissions adequately represented? Finally, from the answers, they calculate a value for current emissions and what they consider to be an acceptable emissions budget.

250 million tonnes of PPE for 7.8 billion people
To measure plastic pollution, the researchers in the PlastikBudget project have developed the persistence-weighted plastic emission equivalent (PPE for short). This represents a virtual mass that takes into account the period of time until a specific plastic emission is degraded, e.g. in soil, freshwater or seawater. Relevant properties for this are the location of the emission, the material type, the shape of the plastic emission as well as the size of the emitted plastic part and the final environmental compartment in which the plastic remains. In the case of plastics that degrade completely within one year, the plastic emission equivalent corresponds to the real mass. If the degradation time is longer, it increases accordingly.

"Based on the thesis that the total amount of plastics already accumulated in the environment today has just reached a critical quantity, we were able to calculate a global plastic emission budget of 250 million tonnes of PPE," explains Jürgen Bertling, project manager of the project and scientist at Fraunhofer UMSICHT. "If each of the 7.8 billion people is allocated the same emission rights, this results in an individual budget of 31.9 kilograms of PPE per person and year."

Driving consumes half of the individual plastic budget
However, tire wear from driving alone corresponds to a plastic emission equivalent of 16.5 kg PPE per year and thus consumes more than 50 per cent of an individual's budget. Even waste from ten coffee-to-go disposable cups would consume 13.5 kg of PPE per year, more than a third of one's budget. "This is because the plastics used in disposable cups are more difficult to degrade than the rubber in the tire," explains Jan Blömer from Fraunhofer UMSICHT, who played a key role in developing the calculation methodology. The consumption of a coil of polyamide for a lawn trimmer, which releases microplastics when used, also weighs in considerably at 5.1 kilograms of PPE. Microbeads in cosmetics or the one-time sanding of a front door, on the other hand, consume significantly less of the individual emissions budget with 1.1 kg PPE and 0.5 kg PPE, but are still quite relevant in the overall balance.

Many other everyday activities also lead to plastic emissions. Nevertheless, the researchers show that the calculated budget limits can be met in various scenarios. However, such a scenario also entails considerable effort and massive changes in the way we deal with plastics today. One possible scenario to meet the budget would be a reduction of emissions by more than 50 per cent, if at the same time at least 50 per cent of all emissions consisted of readily degradable plastics.

Further work on accounting for plastic emissions in life cycle assessments
The persistence-weighted plastic emission equivalent developed in the PlastikBudget project could also represent a new impact category in life cycle assessments in the future. "With the help of factors that reflect the persistence of plastics in the environment, it will be possible in future to compare different product alternatives in terms of their plastic emission footprints," says Dr Daniel Maga, who is coordinating the corresponding further development of the life cycle assessment methodology at Fraunhofer UMSICHT. A corresponding exchange with companies is taking place here. However, implementation in the life cycle assessment methodology and the associated software solutions requires broad acceptance in the scientific community and must be prepared in corresponding standardisation committees.

The project is part of the research priority "Plastics in the Environment" (PidU) of the Federal Ministry of Education and Research (BMBF), in which 18 collaborative projects with around 100 partners from science, industry, associations, municipalities and practice want to clarify fundamental questions about the production, use and disposal of plastics. The research focus "Plastics in the Environment - Sources, Shrinking, Solutions" is part of the Green Economy flagship initiative of the BMBF framework programme "Research for Sustainable Development" (FONA3).

More information:
plastic waste plastics Fraunhofer UMSICHT
Source:

Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT

print close
more
(c) PERFORMANCE DAYS
article as PDF
16.11.2021

PERFORMANCE DAYS 2021: Hybrid Event in December

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

Live in Munich: PERFORMANCE DAYS in Hall A6
In Hall A6 on the grounds of the New Trade Center in Munich, trade visitors can look forward to an extensive portfolio of exhibitors showcasing their latest functional textiles and fabric innovations for the upcoming winter season, winter 2023/24. Exhibitors who are unable to present their highlights on site can also be accessed via the PERFORMANCE DAYS LOOP digital platform throughout the course of the fair. As part of the newly developed “remote booths” concept, trade visitors will for the first time also find collections from exhibitors who cannot be in Munich in person for the trade show. Interactive exchanges via chat, call or video call is planned.

Two further PERFORMANCE DAYS fairs are planned as live events: The Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon, USA on November 17-18, 2021 and Functional Textiles Shanghai by PERFORMANCE DAYS on December 6-7, 2021. Registration is open at www.functionalfabricfair.com/ and www.functionaltextilesshanghai.com/

PERFORMANCE FORUM together with USA Fair
As part of the PERFORMANCE FORUM, a select jury of experts assembles for two days prior to the fair to exchange views on the latest fabric innovations for the winter 23/24 season. In order to ensure a more global market overview, the PERFORMANCE FORUM will curate highlights for the first time in conjunction with the US fair in Portland. Consequently, the next fair in Munich will not only feature the latest products from exhibitors at the Munich fair, but also highlights from the fair in Portland. This year’s Focus Topic in cooperation with the Vaude Academy will engage with the topic “The Sustainable Future of Nylon” and a specific hand-chosen selection of fabric materials. Furthermore, as part of the winter fair, the “sustain & innovate” conference on sustainability, organized in close cooperation with SAZsport, will take an in-depth look at the topic comprising all its aspects along with speakers, webinars and discussion rounds. The program will be broadcast live from the fair and thus accessible for all who wish to follow it online in digital form.  

Eco Award and Performance Award for Innovative Winter Fabrics 23/24
This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD. An integral part of the winter edition of PERFORMANCE DAYS is the presentation of the fabric highlights and accessory trends in the respective categories for the Winter Season 2023/24 at the PERFORMANCE FORUM. The well-known segments will be joined for the first time this winter by the Shoes & Bags category, while the renowned Lifestyle Category will be continued under its new title, “Function Meets Fashion”. The high level of innovation and quality of many of the fabrics submitted this year are particularly striking.

“The fusion of the two PERFORMANCE FORUMs of our fairs in Munich and Portland has lead to a significant increase in quality and innovation. Thanks to the new partnership, not only were we able to get new, exciting manufacturers on board, but there was also a significant increase in participation in general“, says Marco Weichert, CEO of PERFORMANCE DAYS.

Natural fabrics such as organic cotton, wool or canvas remain in demand. These are joined by significantly more plant fibers such as hemp, coconut shell, bamboo or fibers derived from pineapple or banana leaves. The additional use of castor oil, zinc or ginger supports the antibacterial effect, ensures enhanced breathability, optimum temperature management and makes the fabric soft, light and kind to the skin. The topic of recycling presents itself in various new facets and features exciting trends. The portfolio ranges from the recycling of marine waste, such as old buoys, plastic waste or fishing nets, to the recycling of waste from the automotive and computer industries, such as old car tires or computer chips. Natural dyeing methods are also gaining increasing importance, as is the recycling of materials into the textile loop.

In the Marketplace, visitors have the opportunity to view over 13,000+ products from exhibitors, including the fabric highlights of the individual categories at the PERFORMANCE FORUM. In order to be able to present the fabrics to the digital visitors as realistically as possible in terms of feel, design and structure, the PERFORMANCE FORUM has been equipped with groundbreaking 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.

In addition to the PERFORMANCE AWARD WINNER, which goes to drielease/Optimer, there is also an ECO PERFORMANCE AWARD WINNER, awarded to Long Advance.

Completely new look: With the innovative Dricomfort Geo, drirelease turns to a blend of 6 % Lycra, 44 % polyester and 50 % recycled polyester. The processing of the various fibers in the knitting process, in combination with the Dricomfort GEO finishing, makes the reversible interlock fabric unique.

Unique, new pattern and knit designs are possible thanks to a special jacquard knitting process used to process the recycled polyester yarn. The material impresses with its lightness and versatility. The GEO technology also ensures optimal body temperature management. The adaptable technology provides excellent thermal regulation features through efficient heat management and enhanced moisture transport to optimize comfort and performance. Moreover, GEO boasts UV protection up to 50+.

New recycling variant: Long Advance presents LNT-21191-Z4C, a post consumer nylon that opens up a new world to recycling. The fabric, which consists of 7 % elastane and 93% recycled polyamide via Mass Balance, introduces new facets to the topic of recycling. BASF is using tire waste from now on and processes them into a new fiber. fiber. Due to the recycling, the need for synthetic fabrics are reduced to replace petroleum-based plastics with plastics made from renewable raw materials.

(c) PERFORMANCE DAYS
More information:
Performance Days Functional textiles Sustainability Recycling cotton wool linen
Source:

PERFORMANCE DAYS

print close
more
Photo: pixabay
article as PDF
06.07.2021

»Waste4Future«: Today's Waste becomes Tomorrow's Resource

Fraunhofer Institutes pave new ways in plastics recycling

A sustainable society, the renunciation of fossil raw materials, climate-neutral processes - also the chemical industry has committed itself to these goals. For the industry, this means a huge challenge within the next years and decades. This structural change can succeed if all activities - from the raw material base to material flows and process technology to the end of a product's life cycle - are geared towards the goal of sustainable value creation. The key to this is innovation.

Fraunhofer Institutes pave new ways in plastics recycling

A sustainable society, the renunciation of fossil raw materials, climate-neutral processes - also the chemical industry has committed itself to these goals. For the industry, this means a huge challenge within the next years and decades. This structural change can succeed if all activities - from the raw material base to material flows and process technology to the end of a product's life cycle - are geared towards the goal of sustainable value creation. The key to this is innovation.

Plastics such as polyethylene (PE), polypropylene (PP) or polystyrene (PS), which are currently produced almost entirely from fossil raw materials, are fundamental to many everyday products and modern technologies. The carbon contained in plastics is an important resource for the chemical industry. If it is possible to better identify such carbon-containing components in waste, to recycle them more effectively, and to use them again to produce high-quality raw materials for industry, the carbon can be kept in the cycle. This not only reduces the need for fossil resources, but also pollution with CO2 emissions and plastic waste. At the same time, the security of supply for industry is improved because an additional source of carbon is tapped.

The "Waste4Future" lighthouse project therefore aims to create new opportunities for recycling plastics in order to make the carbon they contain available as a "green" resource for the chemical industry. "We are thus paving the way for a carbon circular economy in which valuable new base molecules are obtained from plastic waste and emissions are largely avoided: Today's waste becomes tomorrow's resource," says Dr.-Ing. Sylvia Schattauer, deputy director of the Fraunhofer Institute for Microstructure of Materials and Systems IMWS, which is heading the project. "With the know-how of the participating institutes, we want to show how the comprehensive recycling of waste containing plastics without loss of carbon is possible and ultimately economical through interlocking, networked processes." The outcome of the project, which will run until the end of 2023, is expected to be innovative recycling technologies for complex waste that can be used to obtain high-quality recyclates.

Specifically, the development of a holistic, entropy-based assessment model is planned (entropy = measure of the disorder of a system), which will reorganize the recycling chain from process-guided to material-guided. A new type of sorting identifies which materials and in particular which plastic fractions are contained in the waste. Based on this analysis, the total stream is separated and a targeted decision is then made for the resulting sub-streams as to which recycling route is the most technically, ecologically and economically sensible for this specific waste quantity. What cannot be further utilized by means of mechanical recycling is available for chemical recycling, always with the aim of preserving the maximum possible amount of carbon compounds. Burning waste containing plastics at the end of the chain is thus eliminated.

The challenges for research and development are considerable. These include the complex evaluation of both input materials and recyclates according to ecological, economic and technical criteria. Mechanical recycling must be optimized, and processes and technologies must be established for the key points in the material utilization of plastic fractions. In addition, suitable sensor technology must be developed that can reliably identify materials in the sorting system. Machine learning methods will also be used, and the aim is to link them to a digital twin that represents the properties of the processed materials.

Another goal of the project is the automated optimization of the formulation development of recyclates from different material streams. Last but not least, an economic evaluation of the new recycling process chain will be carried out, for example with regard to the effects of rising prices for CO2 certificates or new regulatory requirements. The project consortium will also conduct comprehensive life cycle analysis (LCA) studies for the individual recycling technologies to identify potential environmental risks and opportunities.

For the development of the corresponding solutions, the participating institutes are in close exchange with companies from the chemical industry and plastics processing, waste management, recycling plant construction and recycling plant operation, in order to consider the needs of industry in a targeted manner and thus increase the chances of rapid application of the results achieved.

The following Institutes are involved in the Fraunhofer lighthouse project "Waste4Future":

  • Fraunhofer Institute for Microstructure of Materials and Systems IMWS (lead)
  • Fraunhofer Institute for Non-Destructive Testing IZFP
  • Fraunhofer Institute for Materials Recycling and Resource Strategy IWKS
  • Fraunhofer Institute of Optronics, System Technologies and Image Exploitation IOSB
  • Fraunhofer Institute for High Frequency Physics and Radar Techniques FHR
  • Fraunhofer Institute for Structural Durability and System Reliability LBF
  • Fraunhofer Institute for Process Engineering and Packaging IVV
(c) Fraunhofer IMWS Photo: pixabay
More information:
Fraunhofer Fraunhofer Institute Fraunhofer IMWS Fraunhofer IZFP Fraunhofer IWKS Fraunhofer IOSB Fraunhofer FHR Fraunhofer LBF Fraunhofer IVV Waste4Future plastics plastics industry Recycling chemicals chemical industry
Source:

Fraunhofer-Institutes

print close
more
Wanted: Start-ups with innovations for textile care © Photo: Messe Frankfurt Exhibition GmbH / Jens Liebchen
article as PDF
09.02.2021

Wanted: Start-ups with innovations for textile care

From 24-hour deliveries, status tracking and green packaging to textile recycling and innovative cleaning technology: new services have the potential to revolutionise the business of dry cleaners and laundries. Against this background, Messe Frankfurt invites start-ups to present their products and ideas at Texcare International. The world’s most important event for the textile-care sector in Frankfurt am Main from 27 November to 1 December 2021 offers young entrepreneurs outstanding opportunities to draw the market’s attention to their innovations.

From 24-hour deliveries, status tracking and green packaging to textile recycling and innovative cleaning technology: new services have the potential to revolutionise the business of dry cleaners and laundries. Against this background, Messe Frankfurt invites start-ups to present their products and ideas at Texcare International. The world’s most important event for the textile-care sector in Frankfurt am Main from 27 November to 1 December 2021 offers young entrepreneurs outstanding opportunities to draw the market’s attention to their innovations.

The demands placed by both private and commercial customers on textile care are extremely high, especially in terms of speed, immediate availability, transparent communication and sustainable solutions. In this connection, Johannes Schmid-Wiedersheim, Director of Texcare International at Messe Frankfurt, says, “Start-ups have an important role to play when it comes to promoting digitalisation and sustainability in the world of textile care. In many cases, they succeed quickly in transforming the results of scientific research or trends from other sectors into useful projects. To support this, we want specifically to promote young, agile companies at Texcare International and offer them an attractive ‘Start-up Package’.”

Digital platforms offer dry cleaners and laundries an opportunity to promote their services online in a modern way. Summarising what makes these platforms so important, Daniel Dalkowski, Managing Director of the European Research Association for Innovative Textile Care (EFIT), says, “Digital platforms are undoubtedly one of the most important achievements of recent times – not just because there are so many of them but also because they have found imitators in the sector. In this case, the innovation is to be seen in a combination of ordering, flexible logistics and billing in a smartphone app or online platform.”

With their robotics solutions and bright ideas for artificial intelligence, IT start-ups help textile care companies on their way to becoming smart laundries. Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, explains how machine and plant manufacturers have benefited from their input: “In the field of mechanical engineering, an important role is played by start-ups offering technical solutions covering a broad spectrum of sectors, e.g., virtual machine commissioning and the optimisation of production process chains.”

Naturally, company founders in other disciplines are also putting forward their ideas. Against the background of the plastic waste debate, there are, for instance, numerous start-ups offering biodegradable packaging materials. As well, there are start-ups in the field of textile recycling, which process used workwear or laundry and thus contribute to the circular economy. And what does the future hold for the sector? One thing is for the experts certain: artificial intelligence and automation offer a great potential for ‘outsiders’ with genuine innovations to gain a foothold in the market. Improvements in the logistics chain of laundries and dry cleaners also have excellent chances of success.

Market entry at Texcare International Texcare
International from 27 November to 1 December 2021 offers start-ups an outstanding opportunity to draw attention to their services and to make contact with established companies. The Start-up Package of Messe Frankfurt includes a turnkey exhibition stand.

The prerequisites for participation:

  • The company was founded no more than ten years ago per 27 November 2021
  • The company employs max. ten people.
  • The annual turnover does not exceed € 1 million (net).
  • The start-up offers innovative products or services especially for the textile-care sector.

The product spectrum of Texcare International embraces machines and plant, laundry and cleaning substances, IT and logistics solutions and workwear and laundry.

More information:
texcare Startup Start-ups
Source:

Messe Frankfurt Exhibition GmbH

print close
more
Compostable agricultural textiles with adjustable service life Foto: Pixabay
article as PDF
30.06.2020

Compostable agricultural textiles with adjustable service life

In the "AgriTex" innovation project, WESOM Textil GmbH, together with the Fiber Institute Bremen e.V. and the Institute for Polymer and Production Technologies e.V., has set itself the goal of developing a compostable technical textile that is to be used in agriculture, among other things. The project is funded over three years by the Central Innovation Program for SMEs (ZIM) and has a funding volume of around 570,000 Euros. A corresponding application was approved by the Federal Ministry for Economic Affairs and Energy (BMWi) in April 2020.

In the "AgriTex" innovation project, WESOM Textil GmbH, together with the Fiber Institute Bremen e.V. and the Institute for Polymer and Production Technologies e.V., has set itself the goal of developing a compostable technical textile that is to be used in agriculture, among other things. The project is funded over three years by the Central Innovation Program for SMEs (ZIM) and has a funding volume of around 570,000 Euros. A corresponding application was approved by the Federal Ministry for Economic Affairs and Energy (BMWi) in April 2020.

Plastics have become an integral part of our everyday lives and are used in a wide variety of areas. At the same time, pollution from plastic waste is one of the greatest global problems of our time. There are already various options for the sensible and environmentally friendly disposal of plastics, e.g. recycling or thermal recovery. However, it cannot always be guaranteed that the waste is also disposed of in the corresponding disposal routes. For example, in agriculture, even if used properly, a release cannot always be prevented or a return is not possible depending on the application. Biodegradable plastics can help to solve this problem, but many of today's products only rot very slowly, as otherwise the required stability and robustness cannot be guaranteed.
     
The aim of the "AgriTex" project partners is to develop an innovative, biodegradable textile for applications in agriculture. On the one hand, the textile withstands the highest mechanical and weather-related requirements during use, on the other hand it rots quickly after a predefined period of use under natural conditions in the environment or on the compost. This two-phase behavior is made possible by a new type of bicomponent fiber made from the biodegradable plastic PLA. The new technology is to be developed and tested using a hail protection net for fruit growing. Hail protection nets are exposed to considerable loads from various weather conditions and usually have to be replaced after a few seasons. Proper disposal of the old nets represents a considerable cost factor for agricultural businesses. With "AgriTex" the nets can be composted with other biological waste in a cost-neutral manner. In addition, unintentionally released netting components from the structure remain, e.g. by storms or damage caused by game, no longer in the long term in the environment and the pollution of ecosystems by plastic waste is effectively prevented. The ecological and economic advantages of the new technology are not only in demand in fruit growing, but will also be of interest for many other applications in agriculture, landscaping or fishing in the future.
 
The idea for the “AgriTex” project came about as part of the PREVON - Production Evolution Network innovation network, which is funded by the Central Innovation Program for SMEs (ZIM). As part of the membership, the partners are actively supported in the implementation of R&D projects and in securing funding.

© Faserinstitut Bremen e.V. © Faserinstitut Bremen e.V.
More information:
agricultural textiles AgriTex
Source:

IWS Innovations- und Wissensstrategien GmbH

print close
more
Photo by pexels.com
11.06.2019

From PET Bottles to Textile Recycling: Where Does the Sports Industry Stand?

  • Recycling: The System in the Sports and Outdoor Industry needs Solutions

Old PET bottles are nowadays used to make polyester clothing, and there are also sports jerseys, outdoor jackets, shirts, trousers and bikinis made of plastic waste. But can textiles and shoes also be recycled? The good news is that some solutions have already been found. However, textiles and shoes can only be recycled with a massive reduction in quality.
 
Recycling of Shoes Possible Since 2018
The world's first industrial recycling plant for all types of footwear has been in operation in Germany since June 2018. It was established by Soex Recycling Germany GmbH from Bitterfeld, which in cooperation with European companies has developed a shoe recycling plant within five years.

Photo by pexels.com Photo by pexels.com
More information:
Recycling recycling fibers
Source:

Messe München GmbH

print close
more