From the Sector

Ontex Group NV, an international developer and producer of personal care products, announces the commercial launch of its newest baby pants, featuring its Dreamshield® 360º innovation. The Dreamshield® 360° technology - designed with a pee & poo back barrier and a 360 fit for all-around protection and comfort – is available in-stores in Germany. The launch will soon expand to other markets as production ramps up across Ontex plants.

Dreamshield® 360º pants have demonstrated great performance in multiple consumer panels versus competitor products. Consumers have expressed their preference for Dreamshield® 360º, particularly related to absorption capacity, absence of leaks, dryness and fit. In a recent French study, 65% of consumers considered absorption capacity in baby products to be extremely important, while 55% emphasized the need to keep skin dry, and 62% rated comfort as a crucial factor.

The new range of baby pants features triple leakage barriers and continues to use Ontex’s patented SeconDRY® technology, ensuring anti-leak fit and dryness.

Ontex saw strong growth in its baby pants sales last year and this trend continues in 2024. The rollout of the baby pant technology has started in Europe with room for expansion to other regions. The production follows the demand of retailers across Europe, who saw the results of Dreamshield® 360º in the German consumer panel¹ and see how their consumers shift to baby pants over traditional diapers, both in Europe and North America.

¹ Lab and panel test by independent Hytec lab in Germany, Q4 2023

In the presence of CEO Eelco Spoelder, Autoneum opened its new production facility in Pune in Western India on August 28, 2024. The opening of the third plant in the key automotive market of India is in line with the Company’s strategic focus on future profitable growth with a particular emphasis on Asian growth markets. Series production of carpet systems, interior trim, wheelhouse outer liners, e-motor encapsulations and other noise protection components for local and international vehicle manufacturers has already begun.

The plant in Pune in the western Indian state of Maharashtra is wholly owned by Autoneum and complements the existing production facility in Behror near New Dehli in the north and the joint venture plant in Chennai in the south of India. During the inauguration ceremony in Pune, Autoneum CEO Eelco Spoelder said: “With the opening of our new plant, Autoneum gains access to the third of the four major automobile production centers in India. By expanding our presence in this strategically important region, we can further strengthen our position in Asia, the world’s largest automotive market.”

The building spans an area of 7 500 square meters and includes modern production equipment. The Pune plant will supply both local and international customers with noise-reducing lightweight components for the interior and exterior of vehicles of all drive types. Pune will be the first Autoneum plant in India with the capability to produce Hybrid-Acoustics PET felts for e-motor encapsulation. Components made of Hybrid-Acoustics PET are characterized by their lightweight construction and noise protection that are optimized for electric vehicles. They consist entirely of PET, which is largely obtained from recycled fibers, and thus meet customer demand for environmentally friendly mobility solutions.

As announced in March, Pune is one of two plants that Autoneum is opening this year in the important Asian growth markets of China and India. The new joint venture plant in Changchun in the northern Chinese province of Jilin will ramp up production of inner dashes, interior floor insulators and other NVH (noise, vibration, harshness) components for European, Japanese and Chinese car manufacturers from the end of 2024. Both new plants in Pune and Changchun are strategically located thanks to their proximity to important customers. In India, Autoneum supplies European, American, Indian, Japanese and Korean vehicle manufacturers.

eVent Fabrics, a company in waterproof and breathable technologies, is looking to the future and offering their partner brands eVent BIO and eVent alpineST technologies. Both are made without PFAS and are compliant with regulations requiring the removal of PFAS chemicals from many consumer products.

eVent BIO
eVent BIO is a bio-based membrane technology that uses sustainable materials to provide all-weather protection and performance. At the laminate technology’s core are renewable plant-based and biomass elements paired with smartly-sourced or recycled face and backer fabrics. Light, tough and flexible, eVent BIO has a reduced carbon footprint and is recyclable when it reaches the end of its lifecycle.

alpineST
alpineST is a sustainable alternative to ePTFE products that provides waterproofness, breathability, and protection in the harshest environments. Created with the planet in mind, alpineST products are built around a fluorine-free membrane laminated to recycled face fabrics. With an initial waterproofness of 25K, alpineST maintains a water column of 20K after dozens of washes.

INDA, the Association of the Nonwoven Fabrics Industry, in partnership with AFS, the American Filtration and Separations Society, announces the call for presentations for the Advances in Filtration Conference at FiltXPO™ 2025, scheduled for April 29-May 1, 2025, in Miami Beach, Florida. Filtration professionals are invited to showcase their latest research and technological advancements during this highly anticipated two-day event.

Abstract submissions are now open and can be submitted through the AFS website.

Conference Highlights:

• Key Topics:
• Nonwovens and Filtration for Healthy Buildings
• Nonwovens and Filtration for Data Centers
• Nonwovens and Filtration for e-Mobility
• Sustainability and Circularity in Filtration
• Innovations Meeting Current Challenges of Filtration
• Presentation Formats:
  The conference will feature both oral presentations and technical posters. The Planning Committee will determine the appropriate format for each submission, with both formats considered equally valuable.
• New Addition:
  This year, the conference introduces technical posters, offering a platform for subject matter experts and research institutes to present their latest filtration innovations.

Abstract submissions are due by October 15, 2024. All submissions will undergo a peer-review process conducted by the Conference Planning Committee.

How to Participate: To submit abstracts and for more information, please visit: https://www.afssociety.org/filtxpo-2025.

Trützschler and the Indian company Gimatex have a long relationship that began in 2006. Gimatex has used Trützschler’s IDF in direct spinning and are now using it to turn textile waste into ring yarn.

Gimatex Industries Pvt. Ltd. operates fully integrated facilities with ginning, spinning, recycling, weaving and processing units in Hinganghat, within India’s cotton-growing region of Vidarbha. It also runs a fabric processing unit in Dholka, near Ahmedabad. Together, Trützschler and Gimatex are working in close collaboration with the shared aim of extending that long history far into the future.

Trützschler’s Integrated Draw Frame (IDF) technology is at the heart of this collaboration. Gimatex is using these solutions to produce high-quality yarn. In particular, IDF enables Gimatex to produce yarns from a wide variety of raw materials – from 100 percent cotton through to polyester, recycled fibers and blends of various different inputs.

Gimatex mainly uses Trützschler IDF to manufacture rotor yarns in a direct spinning process. Direct spinning means shortening the spinning process by eliminating draw frame passages. Fiber slivers are fed directly from the card into the integrated drafting passage. This direct spinning concept uses less electricity and less space than conventional draw frame passages, which helps Gimatex to cut costs while increasing output volumes – with no compromise in quality. Most often, IDF technology is used for rotor and vortex spinning. However, the team at Gimatex is now also one of the first spinning mills in India to develop a special IDF process for producing traditional and recycled ring yarn. This allows the company to leverage the same setup it uses for open-end yarn. The ring yarn produced in this unusual way is mostly coarser varieties and recycling blends for cotton / spandex (lycra) products, with Ne 10s and Ne 16s. The yarn goes through a blow room into a TC 15 card with IDF, before entering a Trützschler TD 10 draw frame, a speed frame and a ring frame.

Mr. Thomas Olsen, EVP Americas, will leave Suominen to pursue new opportunities outside the company. Mr. Markku Koivisto has been appointed as interim EVP, Americas in addition to his current role as EVP, EMEA and CTO.

The process to recruit a new EVP, Americas will start immediately.

“I want to thank Thomas for his contribution in leading the Americas business area and for being a valuable member of our Executive Management Team,” says Tommi Björnman, President and CEO of Suominen.

Source Home & Gift, which takes place on the 1st – 4th September 2024 at NEC Birmingham, welcomes exhibitors from new regions including Peru, South Korea and Portugal, as well as returning pavilions from Philippines, Egypt, Nepal, China, and India. Over 180 manufacturers are expected to show at the next edition.

Hailing from Portugal, Bioneurodesign is a company that integrates principles of biology, neuroscience, and design to create products aimed at enhancing emotional and psychological well-being. This approach transcends traditional aesthetics and functionality, addressing the profound interactions between human consciousness and the environment. Bioneurodesign's mission is to revolutionise product design through scientific principles that foster harmony between humans and their surroundings striving to create objects that not only serve practical purposes but also contribute significantly to the mental and spiritual health of their users. Their latest collection of ceramics and iron is a testament to this approach. Inspired by riverbanks, the River collection blends the delicacy of ceramics with the strength of iron, creating unique pieces that are both functional and contemplative. Produced in Portugal, the creations embody the heritage and craftsmanship of the region.

From South Korea, Ecomass is an eco-friendly kitchenware and household goods manufacturer using materials such as sugarcane and recycled plastic. Ecomass specialise in climate solutions by providing technologies, services, products, and raw materials for green management, sustainability, and eco-friendly consumption.

Sumaq Qara’s mission is to support female victims of terrorism and domestic violence in Peru. They offer a wide portfolio of knit, embroidery, crochet and macramé products, working with natural wools and fibres. Sumaq Qara, words in Quechua that mean "Beautiful Leather", was founded in 2006 with the purpose of helping more than 500 women who were victims of physical and psychological abuse during the time of terrorism. With more than 15 years of exporting, they offer a portfolio of products made with ancestral techniques such as embroidery, knitting, crochet and macramé using natural fibres such as alpaca, merino wool, sheep wool, and cotton.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued the following statement on news of the passing of Congressman Bill Pascrell (D-NJ).

Statement by NCTO President and CEO Kim Glas:

"The entire U.S. textile industry is mourning the loss of Congressman Bill Pascrell (D-NJ), a true leader and advocate for critical manufacturing policies aimed at bolstering the domestic supply chain and confronting ongoing threats from predatory trade practices.

We commend his significant contributions – not just to the U.S. domestic industry—but for American manufacturers and workers everywhere.

Rep. Pascrell had served as co-chair of the House Textile Caucus with Rep. Patrick McHenry (R-NC) since 2013 and was an ardent fighter for the U.S. textile industry and beyond.

In April, Congressman Pascrell championed a bill titled the Import Security and Fairness Act led by Rep. Earl Blumenauer (D-OR) that would exclude all Chinese imports from de minimis treatment, as highlighted in our blog post on a House Ways & Means markup.

He also penned an op-ed with Congressman McHenry highlighting the urgent need to drive investment and for onshoring and nearshoring textile and apparel production and to not weaken the critical U.S. and Central America  Dominican Republic-Central America Free Trade Agreement (CAFTA-DR)..

In addition, he co-sponsored legislation aimed at strengthening the American PPE supply chain which would expand the Berry Amendment to nearly all federal purchases of PPE.

As is evidenced above, Congressman Pascrell took on every policy battle in support of U.S. textiles and manufacturing in general as an unwavering supporter of maintaining and expanding a vital domestic manufacturing chain.  He worked closely with Rep. McHenry on critical textile issues to advance the cause for our domestic industry and its workforce.

He will be missed deeply by the industry and to all who knew him. We extend our gratitude to a manufacturing warrior and express our condolences to the entire Pascrell family and his staff team."

adidas Originals and Edison Chen present the next chapter of their collaboration with the debut of an updated CLOT Gazelle in linen khaki and blue. The ongoing collaboration debuts its first global apparel range with the CLOT August Collection by Edison Chen.

As Edison Chen continues to build bridges between East and West, Chen brings together renowned Spanish football players, Vicky Lopez and Mapi Leon, and Tino El Pingüino, an influential rapper in the Latin music scene, to celebrate this new collection through a campaign that opens the door to their own imaginations. Coming together as one, each collaborator invites to experience a taste of their daily reality and the adventurous paths they tread along the way, igniting creativity and inviting consumers to step into new realms through the creative lens of Edison. With this campaign, Edison Chen was inspired to bring together fashion and cultural impact through the sport of football and music, all inspired by Chen’s extensive travels throughout Europe. The campaign embarks on a journey to create something new out of a classic with an untraditional execution for sportswear.

The CLOT Gazelle by Edison Chen arrives with premium nubuck details on a jute upper and an espadrille sole now adorned with blue stripes. The espadrille gives the shoe a luxurious touch while the khaki coloring achieves a playful, relaxing tone. Derived from the study of traditional Espadrille-making and inspired by classic Espadrille artisans, the stitching was applied to the final construction of the CLOT Gazelle, with special attention given to how the upper is assembled to the bottom. The cotton tape is all custom engineered for the shoe and beaded using an intricate process inspired by Eastern influence. Finally, the midsole is custom engineered for maximum support, highlighting the new construction process.

Lohia Corp Limited (LCL) announced two milestones that mark their expansion in the global market.

The company has acquired J.J. Jenkins Inc., specialized in machine manufacturing for high-tech industries, through their US subsidiary, Leesona Corp, a pioneer in winding machines. This acquisition aligns with their strategic vision to expand their specialty yarns and tapes portfolio in medical and defence applications.

In addition, LCL has formed a strategic Joint Venture with Italy's O.M.G.M. sas, leading to the creation of OMGM Extrusiontechnik Srl. With LCL holding the majority stake. This JV represents a diversification of their product portfolio, introducing solutions in Extrusion and Winding systems for a variety of technical applications.