From the Sector

• Construction of a new air purification and sulfur recovery plant
• Further improvement of the exhaust emission values at the Lenzing site
• Important step in achieving the CO2 targets of the Lenzing Group

Lenzing – The Lenzing Group is a global leader in the climate-friendly and sustainable production of wood-based textile fibers. Lenzing announced its climate targets in August of this year. By 2030, the company aims to reduce its specific CO2 emissions per ton of manufactured pulp and fibers by 50 percent. By the year 2050, the Lenzing Group will no longer generate any net CO2 emissions.

Lenzing‘s Management Board has now resolved to invest EUR 40 mn to expand the production of the raw material sulfuric acid at the Lenzing site. This comprises an important milestone on the path towards climate neutrality. In the future, a new air purification and sulfur recovery plant will not only optimize the company’s self-sufficiency for this raw material and enhance process reliability but improve environmental protection within the context of a clear forward-looking strategy.

Improved exhaust emission performance

The new plant represents an important contribution towards implementing the sustainability strategy of the Lenzing Group, and also helps to ensure an even higher level of environmental compatibility of all production operations at the Lenzing site. The application of state-of-the-art technologies will further improve exhaust emission values. Furthermore, the new facility will help further reduce the use of fossil fuels by generating steam which will, in turn, be converted into electricity. In this way, it will also support the energy self-sufficiency of the company’s operations in Lenzing.

Improved CO2 scorecard

As a result, the production plant in Lenzing will reduce its annual CO2 emissions by 15,000 tons. This is an important step towards further advancing the company’s ambitious plans in the coming years and also strengthen Lenzing’s leadership role as a driver of ecologically sustainable industry. “On the basis of these investments, Lenzing is taking the next step in achieving its climate targets. At the same time, it will also reach a significantly higher level of autonomy with respect to a vital raw material”, states Stefan Doboczky, Chief Executive Officer of Lenzing.

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

With 50 years of experience and the most qualified carbon fiber positions on aerospace programs in the industry with its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing a new fiber to its portfolio. HexTow® HM54 combines high modulus and high tensile strength, which allows structural designers to achieve higher safety margins for both stiffness and strength-critical applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications, examples of golfing applications will be on display.

Additive manufacturing is on the forefront of innovation for composite technologies, and Hexcel is leading the way with its HexAM® additive manufacturing process. HexAM® additive manufacturing combines high performance PEKK thermoplastics with carbon fiber to produce flight-ready 3D printed HexPEKK® parts. HexPEKK® structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

HexPly® M77 snap-cure prepregs are yet another example of Hexcel technology leading the way. HexPly® M77HF, the latest member of this quick-curing prepreg family, is revolutionizing the world of composites for high-performance sporting goods with its faster production times and excellent surface quality. It will be featured in the Hexcel booth in two products – a carbon fiber Goode water ski which is setting records in the competitive world with its precision and durability, and in a HED cycling wheel noted for its aerodynamics and light weight.

Among Hexcel’s latest technologies are the RF Interference Control materials made by ARC Technologies, a Hexcel company. A selection of these industry-leading custom RF / EMI and microwave absorbing composite materials for military, aerospace and industrial applications will be on display at the Hexcel booth.

HexForce® bias weave woven reinforcements are a patented solution to optimize material usage. These bias weave reinforcements are continuous rolls of carbon fiber fabric in which the warp and weft yarns are oriented on the bias at +/- 45° which can reduce prepreg waste up to 60%. Visitors at CAMX will be able to see this new woven reinforcement and learn more.

partner confirms start-up date of the project in Thailand

With the recently announced plans to establish a lyocell production facility in Thailand, the Lenzing Group is taking an important step in meeting the strong demand for lyocell fibers and is further strengthening the company´s position as an industry leader in the specialty cellulosic fibers market. The proposed plant will be the largest lyocell plant in the world, with an annual capacity of 100,000 tons. The total investment volume for the first production line, including infrastructure and site development, amounts to approximately EUR 400 million. Up to four such lines can be potentially integrated and operated on the site. The project is of great importance to Lenzing as it is the first step in bringing lyocell production to Asia, featuring the largest markets, the most important customers and the most extensive growth potential in specialty fiber production.

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

• Continued positive development of specialties business with revenue share of already more than 48 percent
• Commitment to long-term growth plan – investment in new 100,000 tons plant in Thailand approved
• Significantly more challenging market environment for standard viscose with historically low prices
• Outlook for 2019 confirmed

The Lenzing Group continued its solid business development in the first half of 2019. Despite a significantly more challenging market environment with historically low prices for standard viscose, Lenzing recorded a slight increase in revenue. The disciplined implementation of the sCore TEN strategy and the focus on specialty fibers continue to have a positive impact. Thanks to ongoing high demand for sustainably produced specialty fibers and positive currency effects, the impact of low standard viscose prices was largely offset in earnings.

• For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Helizarin® LTC New is a binder designed for low temperature curing or no curing. This allows to reduce the fixation temperature and time compared to conventional pigment printing processes. In addition, manufacturers will not experience the change of shades that sometimes occur with high temperature processes.

When using Helizarin® LTC New, textile manufacturers can therefore improve the productivity of their printing process and reduce their energy consumption.

Helizarin® LTC New is also a welcome solution for textile manufacturers who do not have curing equipment, since it offers similar to better fastness than commodity binders that have been treated through a full process, and excellent fastness on synthetic fibers such as polyester and polyamide.

When it comes to the final result on the fabric, Helizarin® LTC New allows the creation of soft and durable prints for premium quality articles.

The new product will be the core of Archroma's Cool Print, a complete formaldehyde-free* system that keeps printed textiles soft and durable, and the planet cooler.

The system, which combines Helizarin® LTC New with Luprintol® softening and fixing auxiliaries and Printofix® pigment preparations, allows manufacturers to realize potential savings of up to 30% in processing time, 45% in energy consumption and 44% CO2 emissions – compared to benchmark pigment printing.

Helizarin® LTC New, as well as the Cool Print system, is formaldehyde free* and registered under REACH. It can be used in line with the ZDHC & bluesign® requirements, is compliant with the Oeko-Tex Std 100 Class 1 standard for baby wear, and with the MRSL of the most major brands.

“Helizarin® LTC New was developed by Archroma’s R&D team together with experts at our Global Competence Center for Printing, based in Barcelona, Spain”, says Joaquin Femat, Head of Business Development for Printing, Brand & Performance Textile Specialties, at Archroma. “As The Archroma Way is based on Safe, Efficient and Enhanced as its three pillars, we designed an innovation that offers our customers a balanced combination of resource optimization, safe handling, and controlled effluent. Because it’s our nature!”
 

• Undergarments, pajamas and bed linens tested for months
• Moisture management of fibers reduce sweating and hence itching
• Soft and smooth fibers lead to fewer skin injuries

The Lenzing Group has been providing both financial support and textiles made of its fibers to DEBRA Austria, the patient organization for “butterfly children”. The TENCEL™ branded lyocell and modal fibers which are being used are particularly soft and smooth and therefore very skin-friendly. In turn, they help to improve the quality of life for the “butterfly children”.

In recent months, several patients with the skin disorder Epidermolysis Bullosa (EB) have tested leggings, undergarments, pajamas, leggings, quilts and bed linens made of TENCEL™ fibers and have found them to be comfortable and skin-friendly. The skin of EB patients is fragile like the wings of a butterfly. For this reason, coarse fibers, scratching seams, buttons, zippers and fibers which hardly or do not at all absorb sweat frequently lead to additional blisters and sores and increased itching. In contrast, TENCEL™ fibers feature particularly good moisture management and thus support the nature temperature-regulating properties of the body.

• Lenzing plans to invest more than EUR 1 bn in new lyocell fiber production facilities
• First expansion phase with 100,000 tons approved in Thailand
• State-of-the-art production plant enhances global specialty fibers footprint
• Accelerates business growth with TENCEL™ branded fibers
• Biogenic energy supply fosters low CO2 emissions and climate protection  

Lenzing – The Lenzing Group is substantial increasing its production of lyocell fibers to meet the strong demand for these products and further strengthening its position as an industry leader in specialty fibers. Over the next years, it plans to invest more than EUR 1 bn in new production facilities for lyocell fibers. The first expansion phase of this ambitious growth plan, the construction of a state-of-the art lyocell fiber production plant in Prachinburi (Thailand), has now been approved. The plant will have a capacity of 100,000 tons and feature investments of approximately EUR 400 mn.

STAMFORD, Conn. – At this year's Paris Airshow [Le Bourget, June 17-23] Hexcel will promote a range of carbon fibers and composite materials used to manufacture high-performance weight-saving structures in civil aircraft, engines, helicopters, and space applications.

Visitors to the Hexcel stand will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® carbon fiber reinforcements. HiTape® dry carbon reinforcements were developed for the automated lay-up of preforms and to complement a new generation of HiFlow™ resin systems, producing high-quality aerospace structures using the resin infusion process. The reinforcements incorporate a toughening veil to enhance mechanical properties and meet the structural requirements for aerospace parts. The I-Beam was manufactured using C-RTM (Compression Resin Transfer Molding) and was injected with Hexcel’s RTM6 resin in a process taking less than five minutes.

Hexcel honeycomb saves weight and enhances stiffness in composite structures, and the company provides a range of engineered core solutions that enable highly contoured parts with precision profiling to be produced to exact customer specifications. A sample part made from aluminum FlexCore® that is CNC machined on both sides and formed and stabilized with both peel ply and flyaway layers of stabilization will be on display.

Another honeycomb innovation is Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.
Another Hexcel technology to benefit aircraft engines is HexShield™ honeycomb which provides high-temperature resistance in nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential reuse of material after a fire.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

Another area of expertise that uses HexTow® carbon fiber is additive manufacturing, where Hexcel uses PEKK ultrahigh performance polymers and HexAM™ technology to manufacture carbon reinforced 3D printed parts. This innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Later this year Hexcel will open a joint research and development laboratory in Les Avenières (Isère), France with Arkema to develop carbon fiber-reinforced thermoplastic prepreg tapes for aerospace, space and defense applications. A spool of thermoplastic prepreg tape will be on display on Hexcel’s stand to showcase this cost-effective technology that enables lightweight parts to be produced in faster production cycles for future generations of aircraft.

Hexcel’s stand is located next to Hexcel’s official distributor for aerospace products, Groupe Gazechim Composites. In 2018, Hexcel and Gazechim formed a joint venture, HexCut Services, to provide aerospace and defense customers with customized kitting services that include Hexcel’s innovative carbon fiber prepreg, fabrics and adhesives. Pre-cut kits save customers time and investment, reduce inventory and minimize material losses through scrap reduction.

• Lenzing enters the age of digital traceability
• Transparency ensured from wood to the finished garment
• Partnership with Hong Kong based TextileGenesis™

The Lenzing Group, world market leader in specialty fibers made from the renewable material wood, is strengthening its leading position in sustainability in the textile industry. Lenzing will use blockchain technology to support its TENCEL™ branded fiber business, ensuring complete transparency and traceability for brands and consumers of its fibers in the finished garment. After evaluating various initiatives Lenzing decided to join the platform of the Hong Kong based technology company TextileGenesis™ to accomplish this ambition.

Consumers increasingly want to understand the ingredients and suppliers of the products they buy, requesting a new level of transparency and traceability. The supply chain transparency from wood to garment and home textiles will enable all customers and partners to identify TENCEL™ fibers and the respective wood source in each production and distribution step. Thanks to a QR code on the final garment, consumers will be able to detect the origin of the clothes they intend to buy.

“With LENZING™ ECOVERO™ branded fibers Lenzing was the frontrunner in physical traceability and is now entering the age of digital traceability. This milestone in transparency is a further strong commitment to sustainability”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “Together with TextileGenesis™, we aim to create an unmatched level of transparency for brands and consumers. With this step Lenzing will further help to green up the textile industry.”

Lenzing will carry out several pilot tests over the next few months involving partners along the entire value chain. Lenzing expects the platform to be fully operational as of 2020.