From the Sector

Reset
8 results
Photo: Texhibition Istanbul
20.01.2023

Third edition of TEXHIBITION Istanbul Fabric, Yarn and Textile Accessories Fair

  • Third edition of Texhibition Istanbul will take place from 8-10 March 2023 at the Istanbul Expo Center
  • Organizers focus on growth: more than 25,000 international visitors are targeted for March 2023
  • More than 400 exhibitors show fabrics, yarns and accessories at the Istanbul Expo Center
  • Trend seminars and trend area with special focus on sustainability presents the trends for spring/summer 2024

The third edition of Texhibition Istanbul Fabric, Yarn and Textile Accessories Fair, 8-10 March 2023 builds on the successful editions of the fair last year. The fair is organized by the Istanbul Textile Exporters' Association (ITHIB) and with the support of the Istanbul Chamber of Commerce (ICOC).

More than 400 exhibitors from the areas of knitwear, woven fabrics, denim, yarns and accessories will present their 2024 spring-summer collections on 15,000 square meters in the Istanbul Expo Center. These include well-known names such as Kipaş, Bossa, Yünsa, Btd, Çalık, Hefa, İskur, Universal, Gülle, and Migiboy.

  • Third edition of Texhibition Istanbul will take place from 8-10 March 2023 at the Istanbul Expo Center
  • Organizers focus on growth: more than 25,000 international visitors are targeted for March 2023
  • More than 400 exhibitors show fabrics, yarns and accessories at the Istanbul Expo Center
  • Trend seminars and trend area with special focus on sustainability presents the trends for spring/summer 2024

The third edition of Texhibition Istanbul Fabric, Yarn and Textile Accessories Fair, 8-10 March 2023 builds on the successful editions of the fair last year. The fair is organized by the Istanbul Textile Exporters' Association (ITHIB) and with the support of the Istanbul Chamber of Commerce (ICOC).

More than 400 exhibitors from the areas of knitwear, woven fabrics, denim, yarns and accessories will present their 2024 spring-summer collections on 15,000 square meters in the Istanbul Expo Center. These include well-known names such as Kipaş, Bossa, Yünsa, Btd, Çalık, Hefa, İskur, Universal, Gülle, and Migiboy.

At the last event in September 2022, a total of 20,606 visitors took the opportunity to start business discussions and place orders. Among them international visitors from 97 countries, including the EU, UK, USA, North Africa and the Middle East. Over 25,000 visitors are expected at the upcoming Texhibition in March 2023 such as large clothing manufacturers, purchasing managers of international chain stores and department stores, managers of international brands and chains with their own brand collections, managers of online sales platforms, importers, wholesalers, distributors, designers, etc.

The trend area at Texhibition will show the spring-summer 2024 trends with a focus on sustainable aspects.

Texhibition Istanbul completes the IFCO, Istanbul Fashion Connection, which takes place from 8.-11. February 2023, also for the third time at the Istanbul Expo Center.

Source:

Texhibition Istanbul / JANDALI

Photo: Mark Stebnicki, pexels
16.08.2022

USDA presents new study of Chinese Cotton Textile Industry

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

Their study reviewed the regional patterns of China’s cotton textile industry development and identified growing geographic separation between cotton production and textile manufacturing since the 1990s using data from Chinese sources. The study investigated spatial patterns of demand for imported cotton by analyzing lists of Chinese companies applying for a share of the import quota from 2016 to 2022. Multiple regression analysis was used to control for potentially confounding influences when investigating whether companies in coastal provinces were more likely to use imported cotton than similarly sized companies in other regions.

Textile manufacturers — the main consumers of cotton — are concentrated in coastal and central regions where the share of China’s cotton production fell from over 50 percent to 10 percent during 2011–21. These geographic changes are a factor influencing global trade in cotton and textiles. Additionally, the use of forced labor in Xinjiang attracted more attention to the industry, prompting the United States and other countries to ban products produced in the region.

This study reviews the economic, geographic, and policy factors reshaping the industry and influencing the global trade of cotton and textile products. The study also examines data on Chinese companies applying for a share of China’s cotton import quota to gain insight about the demand for imported cotton.

China became the world’s largest producer, consumer, and importer of cotton soon after joining the World Trade Organization (WTO) in 2001. Despite adopting a tariff-rate quota (TRQ) system for cotton imports and issuing supplemental quotas in most years, the large number of cotton goods manufacturers that request shares of the quota suggests demand for imported cotton exceeds  the quota.

While the TRQ was intended to protect China’s cotton farmers, many farmers abandoned the labor-intensive crop as wages rose rapidly in many other industries and other crops produced higher returns. In response, officials encouraged cotton production in the relatively remote region of Xinjiang to prevent China from becoming reliant on imported cotton. Xinjiang growers receive a subsidy payment for cotton, and subsidies for machinery and seeds. A transportation subsidy induces textile manufacturers in eastern and central regions to purchase cotton from Xinjiang, which is about 2,200 to 2,900 miles from most of the country’s textile manufacturers. Financial support and other incentives encourage manufacturers to shift operations to Xinjiang.

Textile manufacturers in China are highly interested in importing cotton due to its lower price and quality. China imports about 20 percent of its cotton, and the United States is a chief exporter of cotton to China. While imported cotton is used in all provinces, manufacturers near the eastern seaboard show a greater propensity for imports. Nevertheless, in all regions, domestic cotton has the largest share of mill use.

Between 2016 and 2022, 1,581 companies applied for a share of the TRQ, and 265 companies applied in all 7 years. Most of these companies also applied for supplemental quotas issued with slightly higher tariffs. This large number of applicants suggests that imports could be even greater if quotas did not limit them. The operation of the quota application process is not public information, but data submitted by applicants suggests access to imported cotton is uneven. About 14 percent of applicants said imported cotton comprised over half of the cotton they used. Another 20 percent of companies requesting import quota did not use any imported cotton, suggesting that many applicants are unable to import. Textile manufacturers coped with limits on cotton imports by increasing their use of synthetic, chemical-based fibers or by importing cotton yarn. From 2000 to 2020, China’s yarn imports doubled from under 1 million metric tons to around 2 million metric tons with Vietnam supplying about 45 percent of that total in 2020.

The number of textile manufacturers in Xinjiang applying for a share of the cotton import quota rose from 37 to 68 between 2016 and 2022. However, imports constituted less than 2 percent of  the cotton Xinjiang applicants reported using—and 66 percent of them reported using no imported cotton—suggesting that applications from Xinjiang textile companies were often denied.
Analysis found that applicants in coastal provinces used more imported cotton than similarly sized applicants in other regions. Each location of a multi-plant company must apply separately for tariff-rate quotas. Textile manufacturers in Xinjiang that requested a share of the import quota included branches of some of China’s largest textile companies, but the analysis found that Xinjiang applicants used less imported cotton than similar manufacturing plants located in other regions. China’s role as a cotton importer appears to have peaked, while other countries are increasing their share of imports.

USDA baseline projections suggest that by 2030 Vietnam, Pakistan, Indonesia, Bangladesh, and Turkey will together account for 47 percent of the world’s cotton imports while China will only account for 24 percent. The study cam be downloaded from the USDA website.

More information:
cotton Cotton USA China Xinjiang
07.07.2022

Successful SMCCreate design conference in Antwerp

With over 60 participants from Europe and Turkey, the first SMCCreate Design Conference took place in Antwerp from 28-29 June. The conference was jointly organised by AVK – Federation of Reinforced Plastics and the European Allicance for SMC BMC. The topics covered the wide spectrum of SMC and BMC manufacturing, from design to sustainability solutions. 16 speakers from different European countries showed what is important in component manufacturing and design, and which solutions the companies offer in regard to materials, performance and much more.

After an overview of the general market developments and how the economic requirements affect component manufacturing, the focus was on the possibilities to enable sustainable design with SMC/BMC. In the second conference section „part design“, the topics of design and modelling, design with structural analysis and flow simulation, standards, and best class solutions as well as surface modification were presented.

With over 60 participants from Europe and Turkey, the first SMCCreate Design Conference took place in Antwerp from 28-29 June. The conference was jointly organised by AVK – Federation of Reinforced Plastics and the European Allicance for SMC BMC. The topics covered the wide spectrum of SMC and BMC manufacturing, from design to sustainability solutions. 16 speakers from different European countries showed what is important in component manufacturing and design, and which solutions the companies offer in regard to materials, performance and much more.

After an overview of the general market developments and how the economic requirements affect component manufacturing, the focus was on the possibilities to enable sustainable design with SMC/BMC. In the second conference section „part design“, the topics of design and modelling, design with structural analysis and flow simulation, standards, and best class solutions as well as surface modification were presented.

A rather newer field was highlighted on Day 2 with Carbon SMC, discussing mobility and automotive applications. These included the integration of multiple material technologies, not forgetting the possibility of implementing green deal strategies here too. The advantages of SMC in automotive components for electrification were explained in more detail. The conference concluded with a sporty presentation on the development of a carbon SMC rear frame for a downhill mountain bike.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

20.05.2022

DiloGroup at ITM + Hightex 2022

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

More information:
DiloGroup ITM Hightex nonwovens
Source:

DiloGroup

Oerlikon Barmag celebrates its 100th anniversary (c) Oerlikon Barmag
A look at the state-of-the-art assembly of a WINGS winder
30.03.2022

Oerlikon Barmag celebrates its 100th anniversary

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

Barmer Maschinenfabrik Aktiengesellschaft (Barmag) is founded in Barmen, located in the Bergische Land region, on March 27, 1922. The German and Dutch founders enter unchartered technological territory, one created as the result of a groundbreaking invention: in 1884, French chemist Count Hilaire Bernigaud de Chardonnet used nitrocellulose to produce the first so-called artificial silk, later known as rayon. The following decades see rapid development focusing on the search for synthetic textile fibers and their manufacturing technologies. As one of the first machine factories, Barmag battles its way through the eventful early years of the manmade fiber industry, the ‘Roaring Twenties’ and the Great Depression – and suffers the extensive destruction of its factories at the end of World War Two. Rebuilding is successful. With the unstoppable success story of purely synthetic plastic fibers such as polyamide, the company flourishes from the 1950s through to the 1970s, establishing sites in all international, for the textile industry at the time important, industrial regions and garnering prestige across the globe in the process. In the ups and downs of expansion, global competition and crises, Barmag reaches the very pinnacle of the market and becomes the preferred technological development partner for the manmade fiber industries in China, India and Turkey. The company has been a high-impact brand under the umbrella of the Oerlikon Group since 2007.

On the wings of innovation
Today, Oerlikon Barmag is a leading supplier of manmade fiber filament spinning systems and part of the Manmade Fibers Solutions business unit of the Oerlikon Polymer Processing Solutions Division. And our aspirations have not diminished: “The striving towards innovation and technological leadership has been, is and will always be part of our DNA”, emphasizes Georg Stausberg, CEO of Oerlikon Polymer Processing Solutions. In the past, this has been observable in such trailblazing innovations as the revolutionary WINGS generation of winders for POY in 2007 and WINGS for FDY in 2012. Currently, the focus of new and further developments is very much on digitalization and sustainability. Here, Oerlikon Barmag has – as one of the world’s first systems manufacturers – been implementing fully-networked smart factories for globally-leading polyester manufacturers since the end of the last decade. Within this context, digital solutions and automation are also helping to provide greater climate and environmental compatibility. This sustainability commitment is not only evidenced by the e-save label introduced for all products back in 2004: Oerlikon is endeavoring to also make all its sites carbon-neutral by 2030 and to acquire its energy exclusively from renewable sources. An ambitious target, whose achievement could be helped by the Oerlikon Barmag anniversary, states Georg Stausberg: “Innovation begins with creativity. And remembering the past provides plenty of motivation and inspiration for the future.”

26.01.2022

World Pultrusion Conference - Postponed

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

22.10.2021

Rieter Investor Update 2021

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

The order intake of CHF 1 673.9 million after nine months corresponds to an increase of 294% compared to the prior year period (2020: CHF 425.1 million).
 
The market development is broadly supported at the global level and is based on a catch-up effect from 2019 and 2020 in combination with a regional shift in demand. Rieter believes that a major reason for this regional shift in demand is the development of costs in China. This is leading to increased investments outside the Chinese market. The orders came primarily from Turkey, Latin America, India, Pakistan and China. Overall, Rieter is benefitting from its innovative product range and the global positioning of the company.

The Business Group Machines & Systems achieved an order intake totaling CHF 1 281.6 million in the first nine months of 2021 (+447%).*

In the first nine months of 2021, the Business Group Components recorded an increase of 95% to CHF 227.0 million, while the Business Group After Sales posted an order intake of CHF 165.3 million, an increase of 123% compared to the prior year period.*

Acquisition of the three Saurer businesses on schedule
The acquisition of the three businesses from Saurer, which Rieter announced on August 16, 2021, is proceeding according to plan. The incoming orders for these businesses are not taken into account in this trading update.
 
Credit lines renewed early
The Rieter Group arranged the early renewal of the existing committed credit lines (five-year term, totaling CHF 250 million).
 
Outlook 2021*
The first nine months of 2021 were characterized by a rapid market recovery combined with a regional shift in demand. Rieter expects the demand for new systems to gradually return to normal in the coming months.  
 
For the full year 2021, Rieter anticipates sales of around CHF 900 million.

* See attached document for more information.

More information:
Rieter spinning Fibers yarn
Source:

Rieter Management AG

Starlinger recoSTAR universal 165 H-VAC iV+ (c) Starlinger & Co Gesellschaft m.b.H.
15.09.2021

Recycled polyester filament yarn made in Turkey

Korteks, one of the world’s biggest yarn producers based in Bursa, Turkey, has started the production of recycled polyester filament yarn in its production facility using a Starlinger recycling line.

With the new recycling facility, which comprises a total closed area of 17,000 m² and has a monthly production capacity of 600 tons, Korteks was able to reduce the production waste at its virgin PES yarn site to zero.

The Starlinger recoSTAR universal 165 H-VAC iV+, which is part of Korteks’ 10 million dollars investment in a new polymer recycling facility, took up operation in May 2021. It has a production capacity of 7,200 tons per year and currently processes clean in-house polyester fibers from production scrap together with washed post-consumer PET flakes at a ratio of 50/50. Korteks uses the polyester regranulate at a share of 100 % for its new polyester filament yarn line it is going to market under the name “TAÇ Reborn”. With this investment, the company has made an important step towards establishing a circular economy in the Turkish textile industry.

Korteks, one of the world’s biggest yarn producers based in Bursa, Turkey, has started the production of recycled polyester filament yarn in its production facility using a Starlinger recycling line.

With the new recycling facility, which comprises a total closed area of 17,000 m² and has a monthly production capacity of 600 tons, Korteks was able to reduce the production waste at its virgin PES yarn site to zero.

The Starlinger recoSTAR universal 165 H-VAC iV+, which is part of Korteks’ 10 million dollars investment in a new polymer recycling facility, took up operation in May 2021. It has a production capacity of 7,200 tons per year and currently processes clean in-house polyester fibers from production scrap together with washed post-consumer PET flakes at a ratio of 50/50. Korteks uses the polyester regranulate at a share of 100 % for its new polyester filament yarn line it is going to market under the name “TAÇ Reborn”. With this investment, the company has made an important step towards establishing a circular economy in the Turkish textile industry.

The Starlinger recycling line is the first of its kind in Turkey and is equipped with special components for filament yarn recycling. A RSC (Rapid Sleeve Changer) candle filter developed by Starlinger ensures finest melt filtration down to 15 μm. It has been specially designed for polyester recycling and reaches an output of 1000 kg/h. For continuous operation the filter elements are changed “on the fly” without interrupting production, which significantly limits melt loss.

The viscoSTAR SSP unit at the end of the recycling process guarantees consistent IV increase according to the first-in-first-out principle. This makes sure that the produced regranulate has the ideal properties required for filament yarn production. The technical configuration of the line does not only allow the processing of a polyester fiber/PET flake mix as input materials, but also 100 % polyester filament scrap or 100 % PET bottle flakes.

Korteks expects the recycling market in general to grow as there is increased acceptance for recycled products in the society, and predicts the need for recycling solutions also for other synthetic and natural fibers.

Source:

Starlinger & Co Gesellschaft m.b.H.