From the Sector

Reset
748 results
Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery   (c) Oerlikon Neumag
Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery
20.03.2020

Oerlikon Neumag: RoTac³ tangling unit with comprehensive modifications

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Stable and efficient yarn production is hugely important to yarn manufacturers. Not only does the evenness of the tangling knots make the investment interesting, so too does the energy efficiency of the RoTac3. The tangling unit requires up to 50 percent less energy for generating compressed air. Against the background of rising energy prices, this represents an excellent prerequisite for optimizing production costs.

Oerlikon Neumag has been able to secure various retrofit contracts since the launch of the RoTac3 in 2015. And new systems are predominantly equipped with RoTac³. The RoTac³ is included in the standard scope of delivery for the newer BCF S8 system. The tangling unit is available as an option both for the single-end Sytec One system and the three - end S+ and it can also be retrofitted on request.

Source:

Oerlikon Neumag 

NCTO (c) NCTO
12.03.2020

NCTO Supports Administration’s Proposals on Economic Stimulus in Coronavirus Response

Rejects Importer Attempts to Remove China 301 Tariffs on Finished Products

The National Council of Textile Organizations (NCTO), representing the full spectrum U.S. textiles from fiber through finished sewn products, issued a statement today welcoming the Trump administration’s proposals on an economic stimulus package to gird the economy against the impact of the coronavirus outbreak, but the organization urged officials to reject any attempts by importers to remove China 301 tariffs on finished products as part of any relief package.

As part of a Phase One deal with China, the administration reduced duties on finished apparel and textile products implemented on Sept.1 from 15 percent to 7.5 percent. Finished apparel, home furnishings and other made-up textile goods equate to 93.5 percent of U.S. imports from China in the sector; while fiber, yarn, and fabric imports from China only represent 6.5 percent, according to government data.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers.

Rejects Importer Attempts to Remove China 301 Tariffs on Finished Products

The National Council of Textile Organizations (NCTO), representing the full spectrum U.S. textiles from fiber through finished sewn products, issued a statement today welcoming the Trump administration’s proposals on an economic stimulus package to gird the economy against the impact of the coronavirus outbreak, but the organization urged officials to reject any attempts by importers to remove China 301 tariffs on finished products as part of any relief package.

As part of a Phase One deal with China, the administration reduced duties on finished apparel and textile products implemented on Sept.1 from 15 percent to 7.5 percent. Finished apparel, home furnishings and other made-up textile goods equate to 93.5 percent of U.S. imports from China in the sector; while fiber, yarn, and fabric imports from China only represent 6.5 percent, according to government data.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers.

  • U.S. employment in the textile supply chain was 594,147 in 2018.

  • The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.

  • U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.

  • Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.

 

More information:
NCTO
Source:

NCTO

Logo of the National Council of Textile Organisations
NCTO supports proposals on ecomomic stimulus
11.03.2020

NCTO Supports Administration’s Proposals on Economic Stimulus

NCTO Supports Administration’s Proposals on Economic Stimulus in Coronavirus Response; Rejects Importer Attempts to Remove China 301 Tariffs on Finished Products

The National Council of Textile Organizations (NCTO), representing the full spectrum U.S. textiles from fiber through finished sewn products, issued a statement today welcoming the Trump administration’s proposals on an economic stimulus package to gird the economy against the impact of the coronavirus outbreak. But the organization urged officials to reject any attempts by importers to remove China 301 tariffs on finished products as part of any relief package.

“The president has outlined the need for a broad economic stimulus package that would include various tax incentives to help impacted industries and workers. We support the administration’s efforts to bolster the economy as a response to the coronavirus outbreak, while opposing add-ons to any stimulus package designed to exploit the crisis,” said NCTO President and CEO Kim Glas.

NCTO Supports Administration’s Proposals on Economic Stimulus in Coronavirus Response; Rejects Importer Attempts to Remove China 301 Tariffs on Finished Products

The National Council of Textile Organizations (NCTO), representing the full spectrum U.S. textiles from fiber through finished sewn products, issued a statement today welcoming the Trump administration’s proposals on an economic stimulus package to gird the economy against the impact of the coronavirus outbreak. But the organization urged officials to reject any attempts by importers to remove China 301 tariffs on finished products as part of any relief package.

“The president has outlined the need for a broad economic stimulus package that would include various tax incentives to help impacted industries and workers. We support the administration’s efforts to bolster the economy as a response to the coronavirus outbreak, while opposing add-ons to any stimulus package designed to exploit the crisis,” said NCTO President and CEO Kim Glas.

As part of a Phase One deal with China, the administration reduced duties on finished apparel and textile products implemented on Sept.1 from 15 percent to 7.5 percent.

Finished apparel, home furnishings and other made-up textile goods equate to 93.5 percent of U.S. imports from China in the sector; while fiber, yarn, and fabric imports from China only represent 6.5 percent, according to government data.

 

More information:
Coronavirus NCTO
Source:

National Council of Textile Organizations

Oerlikon: Automatisiertes Schaben reduziert Fadenbrüche (c) Oerlikon
Oerlikon: Automatisiertes Schaben reduziert Fadenbrüche
05.03.2020

Oerlikon: Automated wiping reduces yarn breaks

Following its installation at several major yarn manufacturers in China, the first wiping robot has now been operating in India since the end of 2019. As already the case with our Chinese clients, the performance of the Oerlikon Barmag solution there demonstrates the same properties: an even, high-quality wiping process providing considerably reduced yarn break rates and higher full package rates. Regular wiping (cleaning) of the spin packs is important for process stability and yarn quality.

Following its installation at several major yarn manufacturers in China, the first wiping robot has now been operating in India since the end of 2019. As already the case with our Chinese clients, the performance of the Oerlikon Barmag solution there demonstrates the same properties: an even, high-quality wiping process providing considerably reduced yarn break rates and higher full package rates. Regular wiping (cleaning) of the spin packs is important for process stability and yarn quality.

The performance data at the Indian yarn manufacturer was collated and evaluated over a period of three months. The results revealed that the yarn break rate has – regardless of the product – fallen by almost 30%. The former running time breaks have decreased by 10% and string-up breaks by 40%. Consequently, full package rates have risen by 3%, while waste rates have fallen by 0.2%. “Yarn breaks are always an issue; they have a direct impact on the production figures. This is where the wiping robot reveals its added value”, comments Stephan Faulstich, Technology Manager POY. The system automatically and autonomously controls the individual positions in accordance with the scheduled wiping cycles. In addition to the scheduled wiping processes, there are also events that cannot be planned or that are not immediately visible. Here, the wiping robot – as a result of its management functionalities – is able to identify issues such as yarn breaks or parallel wiping processes and to independently offer solutions. The same also applies to manual requests: if another action is simultaneously required here, the system identifies this and offers solutions.

The wiping robot operates in a cross-line manner. In contrast to manual wiping, the cleaning quality remains constant around the clock, considerably reducing the impact of the wiping on both the spinning plant process stability and on the yarn data of the spun yarn. And production times can be increased between two cleaning cycles as well: whereas repeated wiping is required after 48 hours in the case of manual wiping, utilizing the robot extends the interval between two wiping processes to up to 60 hours. The considerable increase in the spinning process efficiency achieved by the wiping robot also has a positive impact on margins. To this end, one customer deploying the wiping robot was able to reduce its production costs for the same yarn by more than 3%.

More information:
Oerlikon Barmag
Source:

Oerlikon

PINKO expandiert in den koreanischen Markt
PINKO expandiert in den koreanischen Markt
02.03.2020

PINKO enters Korean market

In keeping with the brand’s internationalization strategy, Pinko is glad to announce an ambitious retail expansion plan in the Korean market.
The first phase of this retail project, developed in collaboration with Mitsui & Co. Italia and La Pace as local partner, saw the opening of two stores located inside two of the most important and prestigious Korean duty free shopping destinations.

The first Pinko shop in Korea opened its doors at the end of January at Seoul’s Shilla Duty Free Downtown Store, which houses the boutiques of the most prestigious global luxury brands. The inauguration of the second Pinko store in Korea was celebrated with an opening party on Feb. 20. This store is located in Seoul at the Hyundai Department Store Duty Free Dongdaemun, one of the most important Korean touristic attractions at day and night, thanks to its wide offering of merchan-dising categories, spanning from international luxury and fashion items to the highly popular Made in Korea beauty products.

In keeping with the brand’s internationalization strategy, Pinko is glad to announce an ambitious retail expansion plan in the Korean market.
The first phase of this retail project, developed in collaboration with Mitsui & Co. Italia and La Pace as local partner, saw the opening of two stores located inside two of the most important and prestigious Korean duty free shopping destinations.

The first Pinko shop in Korea opened its doors at the end of January at Seoul’s Shilla Duty Free Downtown Store, which houses the boutiques of the most prestigious global luxury brands. The inauguration of the second Pinko store in Korea was celebrated with an opening party on Feb. 20. This store is located in Seoul at the Hyundai Department Store Duty Free Dongdaemun, one of the most important Korean touristic attractions at day and night, thanks to its wide offering of merchan-dising categories, spanning from international luxury and fashion items to the highly popular Made in Korea beauty products.

Pinko’s retail expansion plan in the Korean market also includes the opening of two new stores by the end of 2020, while the company aims to operate a total of 14 boutiques, 6 inside department stores and 8 at Duty Free destinations, within three years.

More information:
PINKO
Source:

NETWORK PUBLIC RELATIONS

Hexcel at JEC World 2020
Hexcel at JEC World 2020
25.02.2020

Hexcel at JEC World 2020

Hexcel’s Leading Position in Aerospace and Automotive Makes Hexcel a Trusted Partner for Urban Air Mobility

At this year’s JEC World in Paris on March 3-5, Hexcel will highlight the growing need for innovations in composite materials to support the emerging Urban Air Mobility (UAM) market.

Urban air mobility – urban transportation systems that move people by air or enable cargo deliveries – is the next big transportation innovation. Similar to taxis or ride sharing today, UAM will help remove congestion from our streets and provide a convenient, rapid method for travel in urban centers as well as in remote areas.

Advanced composite materials will be at the heart of UAM vehicles by providing lightweight, efficient, reliable, and cost-competitive options for manufacturing. “Materials have been a key driver of efficiency for aircraft today, and they will be even more important for the emerging UAM marketplace,” said Imad Atallah, Director of Strategic Marketing for Aerospace and Urban Air Mobility at Hexcel.

Hexcel’s Leading Position in Aerospace and Automotive Makes Hexcel a Trusted Partner for Urban Air Mobility

At this year’s JEC World in Paris on March 3-5, Hexcel will highlight the growing need for innovations in composite materials to support the emerging Urban Air Mobility (UAM) market.

Urban air mobility – urban transportation systems that move people by air or enable cargo deliveries – is the next big transportation innovation. Similar to taxis or ride sharing today, UAM will help remove congestion from our streets and provide a convenient, rapid method for travel in urban centers as well as in remote areas.

Advanced composite materials will be at the heart of UAM vehicles by providing lightweight, efficient, reliable, and cost-competitive options for manufacturing. “Materials have been a key driver of efficiency for aircraft today, and they will be even more important for the emerging UAM marketplace,” said Imad Atallah, Director of Strategic Marketing for Aerospace and Urban Air Mobility at Hexcel.

Already, Hexcel is a leader in advanced composite materials for the aerospace market and is a key supplier of composite materials to the automotive industry. So, the company is well positioned to offer solutions to meet the critical needs of high-rate and quick-part manufacturing cycles, in addition to low-cost needs for this space. Hexcel’s materials solutions approach for UAM is to make it greener and more sustainable, safer, more comfortable, and more affordable.

Hexcel’s broad range of carbon fiber and HexPly® prepreg solutions, including snap cure thermosets and thermoplastics, coupled with the most qualified positions on aerospace programs in the industry make the company a trusted partner for UAM. In addition to offering composite materials from carbon fibers, prepregs, honeycomb and reinforcements, Hexcel’s best-performing market solution in noise absorption on aircraft jet engines, Acousti-Cap®, provides a strong position of innovation to solve one of the most critical problems in the UAM space – community noise. “We are applying our technologies to the unique needs of urban air mobility vehicles,” Atallah said.

Hexcel’s ability to bring materials technology from the aerospace and automotive industries represents a unique strength in solving the critical challenges of UAM, especially around high-rate manufacturing, low-cost materials, light weighting, and noise. “Both thermoplastics and quick-cure thermoset materials are expected to have applications on UAM vehicles,” Atallah said. Furthermore, Hexcel’s broad product portfolio including unsized carbon fiber has proven to be the most compatible with thermoplastic resins from a consolidation perspective.

More information:
Hexcel JEC World
Source:

AGENCE APOCOPE

Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group
Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group
21.02.2020

Stephan Sielaff and Christian Skilich appointed to the Management Board of the Lenzing Group

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Stephan Sielaff is a chemical engineer who gained experience in the chemical industry in the years 1993 to 2014, holding various management positions for Unilever and Symrise. Since 2014, he has worked for the Swiss specialty chemicals company Archroma, an important supplier of the textile and paper industry, as a Member of the Board of Directors and Chief Operating Officer (COO).He has been responsible for forming the integrated operational structure and the strategic development of the company.

Christian Skilich, who will assume management responsibility for the new Pulp and Wood Raw Materials Division in the Lenzing Group, boasts outstanding expertise in the field of paper and pulp technology. With a Master of Science in Paper Technology and Engineering & Economics, he first held various positions in the paper, packaging and glass industries. Since 2004, he has worked in a broad range of management areas on behalf of the internationally operating Mondi Group. Christian Skilich most recently served as Chief Operating Officer on Mondi’s Board of Directors, overseeing projects in the USA and Europe.

More information:
Lenzing AG
Source:

Lenzing AG

Lenzing ramps up production in China again to full capacity
Lenzing ramps up production in China again to full capacity
21.02.2020

Lenzing ramps up production in China again to full capacity

Supply bottlenecks eliminated. All production lines back to full operation.

Following its temporary cutting back of production at the Nanjing site in China, Lenzing has now once again ramped up operations on all production lines to reach full capacity. Recently supply shortages of important raw materials arose as a result of intense transport controls in connection with the current situation surrounding the coronavirus. For this reason, output from two production lines was scaled back for a short time. All production lines are now fully operational again after the successful resumption of the required supplies to the manufacturing facility.

Supply bottlenecks eliminated. All production lines back to full operation.

Following its temporary cutting back of production at the Nanjing site in China, Lenzing has now once again ramped up operations on all production lines to reach full capacity. Recently supply shortages of important raw materials arose as a result of intense transport controls in connection with the current situation surrounding the coronavirus. For this reason, output from two production lines was scaled back for a short time. All production lines are now fully operational again after the successful resumption of the required supplies to the manufacturing facility.

More information:
Lenzing Group Coronavirus
Source:

Lenzing AG

President of Indonesia Inaugurates Country’s Largest Viscose Rayon Facility (c) APR
President of Indonesia Inaugurates Country’s Largest Viscose Rayon Facility
21.02.2020

APR: New Viscose Rayon Facility

  • Investment of Rp. 15 trillion (USD1,1 billion) in facility
  • Supports development of national textile industry and ‘Making Indonesia 4.0’ roadmap

The President of Indonesia, Joko Widodo, today inaugurated Indonesia's largest integrated viscose rayon production facility, injecting a boost for the country’s textile sector and the Indonesian Government’s industrial 4.0 development strategy.

The new Asia Pacific Rayon (APR) facility is located in the same production complex as APRIL Group in Pangkalan Kerinci, Riau province, Sumatra. This co-location allows integrated operations where renewable plantation pulp supply from APRIL feeds directly to APR for viscose rayon production. The new operation represents a total investment of approximately Rp.15 trillion (USD1.1 billion).

The APR facility has an annual production capacity of 240,000 tons. The inauguration ceremony included the signing of a plaque by President Widodo and the symbolic sealing by the President of an export container with 10,190 tons of viscose rayon fibre for shipment to Turkey, one of APR’s key export markets, and another 12,000 tons to Central Java.

  • Investment of Rp. 15 trillion (USD1,1 billion) in facility
  • Supports development of national textile industry and ‘Making Indonesia 4.0’ roadmap

The President of Indonesia, Joko Widodo, today inaugurated Indonesia's largest integrated viscose rayon production facility, injecting a boost for the country’s textile sector and the Indonesian Government’s industrial 4.0 development strategy.

The new Asia Pacific Rayon (APR) facility is located in the same production complex as APRIL Group in Pangkalan Kerinci, Riau province, Sumatra. This co-location allows integrated operations where renewable plantation pulp supply from APRIL feeds directly to APR for viscose rayon production. The new operation represents a total investment of approximately Rp.15 trillion (USD1.1 billion).

The APR facility has an annual production capacity of 240,000 tons. The inauguration ceremony included the signing of a plaque by President Widodo and the symbolic sealing by the President of an export container with 10,190 tons of viscose rayon fibre for shipment to Turkey, one of APR’s key export markets, and another 12,000 tons to Central Java.

The ceremony was also graced by the Minister of Industry, Agus Gumiwang Kartasasmita, the Minister of Trade Agus Suparmanto, the Governor of Riau, Syamsuar, RGE Founder and Chairman Sukanto Tanoto, and Anderson Tanoto, Director, RGE.

Speaking at the inauguration, President Widodo welcomed APR's investment in the development of the national textile industry. The role of the private sector was influential in driving economic growth, alongside the stimulus provided by the Government, he said. “Our garment industry should be greater than Vietnam. We already have our own raw materials here, such as viscose rayon, to support the industry,” he said.

Economic Contribution
APR’s business aligns with President Jokowi's vision to encourage more value-added investment in the nation and the strengthening of the national textile and textile product (TPT) industry, as set out in the Making Indonesia 4.0 Road map. In addition, the production of viscose rayon will reduce dependence on the import of textile raw materials, particularly cotton, to meet domestic demand.

Agus Gumiwang Kartasasmita, Minister for Industry, said: “By optimising the availability and use of raw materials originating from Indonesia, we can boost the performance of our textile sector. This is just one of several steps we are taking to continue to improve the performance and competitiveness of the labour-intensive industry.”

Basrie Kamba, Director APR, said: “The presence of APR will have a positive impact on employment and business opportunities for small and medium-sized businesses in the upstream and downstream sectors of the textiles and textile products industry. We are honoured and grateful to President Jokowi for inaugurating our new facility”.

In addition to Turkey, APR’s products are exported to 14 other countries including key textile centres such as Pakistan, Bangladesh, Vietnam, Brazil, and various parts of Europe. The products also support an expanding Indonesia fashion industry.

It is estimated that APR may generate foreign exchange revenues exceeding Rp1.77 trillion (USD130 million) annually, and reduce dependence on imported raw materials by about Rp2.01 trillion (USD149 million) annually.

Sustainable Production
APR produces sustainable viscose rayon fiber from renewable, traceable and biodegradable raw materials. The company’s raw materials are supplied by APRIL Group, which is recognised as a responsible pulp producer through national (Timber Legality Verification System) and international (Program for the Endorsement of Forest Certification/PEFC) certifications.

APR is the first viscose rayon manufacturer in Indonesia to receive the internationally recognised STeP certification from OEKO-TEX ®, an independent Swiss-based certification organisation, for the responsible manufacturing of viscose staple fibre.

APR has launched the ‘Everything Indonesia’ campaign to promote the sustainable sourcing and production of fashion from Indonesia. The aim is to support Indonesia’s resurgence as a global centre for textile manufacturing, and catalyse home-grown fashion design and creativity.

Source:

Omnicom Public Relations Group

DyStar resigns from ETAD and joined TEGEWA
DyStar resigns from ETAD and joined TEGEWA
17.02.2020

DyStar resigns from ETAD and joined TEGEWA

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation has resigned from Ecological and Toxicological Association of Dyes and Organic Pigments Manufacturers (ETAD) and joined TEGEWA as a member since January 2020.

Despite being one of the major sponsors and supporters of ETAD for many years, DyStar had to make this decision in response to the new industry challenges. The executive decision to leave ETAD and join TEGEWA was made after careful considerations on current global business needs, market demands and customers’ requirements. In conclusion, DyStar decided to work with an organization that can better represent and effectively support the Chemical Industry in a fast and challenging environment, and at the same time, provide essential support to the Textile Chemical Producers, the Brands and Retailers, among other stakeholders in the worldwide supply chain.

DyStar, a leading specialty chemical company with a heritage of more than a century in product development and innovation has resigned from Ecological and Toxicological Association of Dyes and Organic Pigments Manufacturers (ETAD) and joined TEGEWA as a member since January 2020.

Despite being one of the major sponsors and supporters of ETAD for many years, DyStar had to make this decision in response to the new industry challenges. The executive decision to leave ETAD and join TEGEWA was made after careful considerations on current global business needs, market demands and customers’ requirements. In conclusion, DyStar decided to work with an organization that can better represent and effectively support the Chemical Industry in a fast and challenging environment, and at the same time, provide essential support to the Textile Chemical Producers, the Brands and Retailers, among other stakeholders in the worldwide supply chain.

TEGEWA, being a sector association within the German Chemical Industry Association (VCI), is also actively involved in the work of VCI. The association has over 100 members and represents manufacturers of chemical substances and mixtures, such as surfactants, textile, paper and leather auxiliaries, colorants, cosmetic raw materials, antimicrobial agents, polymeric flocculants and allied products.

TEGEWA has also deeply engaged with DyStar and its partners of GCIRT on many meaningful discussions for the industry, such as communications with the ZDHC Organisation.

Fanny Vermandel, Vice President, Global Marketing Coloration at DyStar said, “At DyStar, we are customer-focused. We find TEGEWA a good fit and appreciate their diverse network. Most importantly, we are delighted to learn that TEGEWA works with many organizations such as IVTG and t+m, Brands and Retailers and other stakeholders in the worldwide supply chain.”

More information:
DyStar TEGEWA ETAD
Source:

DyStar

Bremer Baumwollbörse, Bremer Rathaus (c) Bremen Cotton Exchange
Bremer Baumwollbörse, Bremer Rathaus
10.02.2020

International Cotton Conference Bremen 2020: keynotes

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

Source:

Bremer Baumwollbörse

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

(c) A. Monforts Textilmaschinen GmbH & Co. KG
24.01.2020

Talking sustainability with Monforts denim customers

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

While still being synthetic based, CiCLO polyester is able to biodegrade in marine environments, wastewater treatment plants and landfill conditions, at rates similar to natural fibres like wool. 

This more sustainable solution for stretch is also being introduced to China for the first time by another leading denim supplier, Advance Denim.

“Advance Denim is spending its resources on being the most technologically advanced company in China, and also the most sustainable,” says Mark Ix, the company’s Director of Marketing. “We are investing heavily in our manufacturing to save both water and chemicals to create cleaner products.”

Monforts denim customer Berto is a family-owned company with its main denim mill in Bovolenta, a small rural town near to Padua in the north east of Italy, where respect for the environment has always been a must.

“The family has always been focused on respect for the environment,” says Berto’s Marketing Manager Francesca Palento. “In particular, we have a river next to the company from which we take our water for production and we then return it cleaner than it was before. We are also now producing GOTS and Global Recycling Standard jean produced with yarns made from our own internal waste production.”

Pakistan’s Soorty has recently received Cradle to Cradle Gold certification – the most stringent and exacting sustainable standard currently in existence – for its Pure D range of denims. These are produced using the company’s proprietary Zero Waste Water dyeing technology, in combination with the most advanced Monforts finishing machines. 

“Our very latest collection is called Climate Jeans, because every single product we now produce draws attention to the climate emergency we are living through right now,” says Eda Dikman, Soorty’s Marketing Communications Manager. “Sustainability is very important to us because we produce at scale and all of the actions we take reflect on the planet.”

24.01.2020

NCTO Applauds Trump Administration’s Move to Crack Down on Imported Counterfeits

The National Council of Textile Organizations (NCTO) issued a statement today on the Trump administration’s announced action plan to increase enforcement and penalties against counterfeit goods sold online and imported to the U.S.

“This is a very important and long overdue move on the part of the administration to increase enforcement activity and penalties against counterfeit goods sold online and imported into the United States,” said NCTO President and CEO Kim Glas. “We commend the administration for making a commitment to bolster efforts to crack down on counterfeits, particularly in the textile and apparel sector, which has been hit hard by fake imported products for decades.”

Nearly two million shipments of goods are exported to the United States duty free each day-- often from countries with poor labor, human rights and environmental track records—under a provision known as Section 321 de minimis. This provision allows goods valued below an $800 threshold to enter the U.S. duty free when imported directly to an individual on a single day.  

The National Council of Textile Organizations (NCTO) issued a statement today on the Trump administration’s announced action plan to increase enforcement and penalties against counterfeit goods sold online and imported to the U.S.

“This is a very important and long overdue move on the part of the administration to increase enforcement activity and penalties against counterfeit goods sold online and imported into the United States,” said NCTO President and CEO Kim Glas. “We commend the administration for making a commitment to bolster efforts to crack down on counterfeits, particularly in the textile and apparel sector, which has been hit hard by fake imported products for decades.”

Nearly two million shipments of goods are exported to the United States duty free each day-- often from countries with poor labor, human rights and environmental track records—under a provision known as Section 321 de minimis. This provision allows goods valued below an $800 threshold to enter the U.S. duty free when imported directly to an individual on a single day.  

“This massive increase in de minimis shipment trade poses significant security risks and threats to public health and safety, while incentivizing customs fraud and creating a loophole to our entire tariff structure,” Glas said. “Our concerns regarding the de minimis loophole are exacerbated by the belief that the domestic textile industry and other U.S. manufacturing interests are directly and negatively impacted, particularly since e-commerce sites like Amazon and others are using de minimis as a duty-free portal into the U.S. for products under $800.”

Furthermore, CBP’s own annual report on intellectual property seizures, including large volumes of counterfeits, revealed that U.S. authorities made seizures totaling $1.4 billion in fiscal 2018. Over 90 percent of all intellectual property (IPR) seizures occur in the international mail and express shipment environments, according to the report, which is a common method of shipping by e-commerce sites.

Chinese products accounted for 46% of all IPR seizures with a total Manufacturers Suggested Retail Price (MSRP) value of $761.1 million in FY 2018. Apparel and accessories were the top counterfeit products seized by U.S. authorities, accounting for 18% of all seizures in FY 2018 with an MRSP value of $115.2 million.

“We think this is an important step forward by the administration to deepen the analysis on de minimis products--- that are often not thoroughly examined and undercut our domestic manufacturing industries,” Glas said. “We don’t know what the products are, where they are coming from, whether they meet U.S. safety requirements, who is making them or the country of origin. We believe it is long past time for the administration to address the issue of de minimis shipments and counterfeiting head on.”

 

More information:
NCTO
Source:

NCTO

DOMO Chemicals appoints Yves Bonte as CEO (c) DOMO Chemicals
DOMO Chemicals appoints Yves Bonte as CEO
21.01.2020

DOMO Chemicals appoints Yves Bonte as CEO

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

DOMO Chemicals, a global leading player in engineering nylon materials towards sustainable solutions, today announced its transition plan for the function of Chief Executive Officer. The Board of Directors of DOMO has appointed Yves Bonte to succeed current CEO Alex Segers during February 2020. Mr. Segers has held the CEO position at DOMO since the Company started its chemical activities in 1994 and will continue to play an important role in the transformation of Solvay’s European Performance Polyamide and DOMO into one company. Closing of the acquisition of Solvay’s European performance Polyamide Business by DOMO is expected to take place on January 31st.

Alex Segers commented, “I feel privileged to have been given the opportunity to work with the DOMO team over the past twenty-six years, which has really been an incredible journey. We are now entering the next level for the company by integrating very soon the European Performance Polyamides Business from Solvay. In Yves we have found the ideal person to pass the baton to. We look forward to a seamless transition.”

Gregory De Clerck, Managing Director of Domo Investment Group and Member of the Board of DOMO Chemicals commented, “I would personally like to thank Alex for his leadership in the successful growth and transformation of DOMO from an upstream nylon 6 specialist into a full integrated engineering materials company developing innovative and sustainable solutions in the Polyamide Industry. We are excited to welcome Yves Bonte to DOMO as the new CEO and Chairman of DOMO Chemicals. We believe he is the ideal person to lead the next chapter of the Company’s growth and transformation process. Alex will continue to significantly contribute to the success of new DOMO.”

Yves Bonte joins DOMO from Yara, the leading fertilizer company and a provider of environmental solutions where he held the role of Executive Vice President Industrial recently named New Business since January 2010, and was responsible for a business generating appr. 20% of Yara’s total revenue of 12.9 billion USD. Prior to Yara, he held a variety of business leadership, commercial and operations roles at Lyondell Basel and Exxon Chemicals. Since 2018 Yves is as Board Member of DOMO.

“I have a true passion for innovation and sustainability, and I am thrilled to join DOMO as its next CEO,” Yves Bonte commented. “The Company has established itself as a leader in sustainable polyamide based on its strong technology-driven product portfolio with a solid foundation to further build upon. I believe DOMO is uniquely positioned to support its customers’ manufacturing processes in a cost effective and sustainable manner. The recently announced long-term strategy and planned investment will position DOMO to reach new levels of growth and success.”

More information:
DOMO Chemicals
Source:

Marketing Solutions NV

(c) SGL Carbon
15.01.2020

SGL Carbon: New production hall at the Bonn site

  • Increasing demand for graphite-based automotive solutions
  • Strengthening SGL Carbon’s site in Bonn

Over the past three years, SGL Carbon has invested a total of around 25 million euros in the modernization and expansion of its production capacities for specialty graphite automotive components at the Bonn site. The expansion project was completed at the end of last year and was inaugurated today at the site in an official ceremony. Besides the installation of partly new production facilities and a modernized production set-up, construction of a new, 2,000 m2 large hall for the production of the parts was implemented in the course of the expansion.

  • Increasing demand for graphite-based automotive solutions
  • Strengthening SGL Carbon’s site in Bonn

Over the past three years, SGL Carbon has invested a total of around 25 million euros in the modernization and expansion of its production capacities for specialty graphite automotive components at the Bonn site. The expansion project was completed at the end of last year and was inaugurated today at the site in an official ceremony. Besides the installation of partly new production facilities and a modernized production set-up, construction of a new, 2,000 m2 large hall for the production of the parts was implemented in the course of the expansion.

The background of the expansion is the continuously increasing demand for advanced solutions and products made from graphite in the automotive sector. Due to its durability, high strength, low friction behavior, and high conductivity, the material is suitable for many different automotive applications. Examples include rotors and vanes in vacuum pumps for brake boosters, bearings for exhaust gas management, and sealing rings and bearings for seals in coolant pumps. These solutions include applications for vehicles with conventional combustion engines as well as for e-mobility, thereby making an important contribution to clean driving, higher energy efficiency, and lower emissions.

“Automotive components made from specialty graphite are increasingly becoming the standard in many different applications in the automotive industry. Due to their special properties, they are more and more frequently replacing the materials previously used in pumps and seals, such as plastic and metal. By investing in the modernization and expansion of production in Bonn, we are consolidating our leading position in this market and offering our customers real added value in the close partnership with each other. Through the expansion, we are also strengthening our site in Bonn,” explains Burkhard Straube, President of the business unit Graphite Materials & Systems.

More information:
SGL Carbon
Source:

SGL Carbon

Messe Frankfurt (HK): Intertextile Shanghai Home Textiles Messe Frankfurt (HK) Ltd: Intertextile Shanghai Home Textiles August
Messe Frankfurt (HK): Intertextile Shanghai Home Textiles
15.01.2020

Messe Frankfurt (HK) Ltd: Intertextile Shanghai Home Textiles August 2020

Intertextile Shanghai Home Textiles – Autumn Edition will return from 24 – 26 August 2020 at the National Exhibition and Convention Center (Shanghai), organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). Stepping into its 26th edition, the trade fair will provide exhibitors the perfect opportunity to introduce new products and expand their distribution networks, as well as serving as a source of information and inspiration for professionals in every aspect of the industry.
 
Celebrating its 25th anniversary last August, the Autumn Edition of Intertextile attracted 1,147 exhibitors from 27 countries & regions, as well as 35,390 trade buyers from 117 countries & regions (2018: 104), reflecting the increasing internationalism of Messe Frankfurt’s textile fairs in China, and the growing opportunities for international suppliers to meet a wide range of buyers in Shanghai. The trade fair’s capacity to attract large and diverse crowds has reinforced its status as the leading business platform for the home textile industry in the Asia Pacific region.
 

Intertextile Shanghai Home Textiles – Autumn Edition will return from 24 – 26 August 2020 at the National Exhibition and Convention Center (Shanghai), organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). Stepping into its 26th edition, the trade fair will provide exhibitors the perfect opportunity to introduce new products and expand their distribution networks, as well as serving as a source of information and inspiration for professionals in every aspect of the industry.
 
Celebrating its 25th anniversary last August, the Autumn Edition of Intertextile attracted 1,147 exhibitors from 27 countries & regions, as well as 35,390 trade buyers from 117 countries & regions (2018: 104), reflecting the increasing internationalism of Messe Frankfurt’s textile fairs in China, and the growing opportunities for international suppliers to meet a wide range of buyers in Shanghai. The trade fair’s capacity to attract large and diverse crowds has reinforced its status as the leading business platform for the home textile industry in the Asia Pacific region.
 
In the next edition, a large collection of quality Chinese companies, as well as premier overseas brands will once again present the entire spectrum of home and contract textile products including:

  • Textile editors
  • Whole Home Products
  • Windows & Upholstery
  • Bedding, Bath, Kitchen & Table
  • Carpets & Rugs
  • Sun-Protection
  • Wallcovering
  • Digital Print & Technics
  • Fibers, Yarns & Chemicals
  • Textile Designs

Opportunities abound in China’s home textiles market
 
“The upcoming Autumn Edition of Intertextile is set to offer suppliers and buyers the best platform to capture new business opportunities, especially as we continue to focus on bringing together more key players from the textiles, interiors, architecture and hospitality sectors in China and internationally,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.
 
“Over the years, Intertextile has been evolving from a traditional trade fair to an immersive and interactive experience that inspires and engages attendees. Today, the fair is more than a business platform; it also delivers state-of-the-art home trends, valuable networking opportunities, as well as innovative and strategic solutions for brand development through a series of fringe programme events,” Ms Wen further explained.
 
As one of the selected exhibitors featured in the Talks & Tours series at the 2019 fair, Mr Thomas Luys, Sales Manager of LIBECO-LAGAE: “We had quite a diverse range of visitors, including an increase in e-commerce buyers, but also more traditional upholstery fabrics buyers. Our booth was also part of the Talks & Tours, so it was important to tell our story to a diverse range of visitors on this tour.”
 
 
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

 

Source:

(c) Messe Frankfurt (HK) Ltd

13.01.2020

Kelheim Fibres: Frontrunner in CanopyStyle “Hot-Button“Ranking

In the 2019 `Hot-Button´ report issued by the forest conservation organisation Canopy, Kelheim Fibres attained a “green shirt” ranking. Many fashion brands already value the `Hot-Button´ report as a reliable indicator for sustainability for viscose fibre producers.

Raw material wood sourced only from certified sustainable forestry
The CanopyStyle initiative aims to achieve that no wood from ancient and endangered forests is used to produce viscose fibres. The audited companies must prove that they avoid these fibres and have implemented appropriate rules and procedures to check the origin of the wood. Performance in the areas environmental protection and innovation have been examined and evaluated by qualified external auditors; the report will be posted publicly in the first quarter of 2020.

In the 2019 `Hot-Button´ report issued by the forest conservation organisation Canopy, Kelheim Fibres attained a “green shirt” ranking. Many fashion brands already value the `Hot-Button´ report as a reliable indicator for sustainability for viscose fibre producers.

Raw material wood sourced only from certified sustainable forestry
The CanopyStyle initiative aims to achieve that no wood from ancient and endangered forests is used to produce viscose fibres. The audited companies must prove that they avoid these fibres and have implemented appropriate rules and procedures to check the origin of the wood. Performance in the areas environmental protection and innovation have been examined and evaluated by qualified external auditors; the report will be posted publicly in the first quarter of 2020.

Sustainable fibres for a changing market
“For years now Kelheim Fibres has consistently recognised the importance of sustainability and environmental protection. Now that resource saving and alternatives to plastics are of focal interest to the public and to the economy, our products are meeting with an even better reception from the market. Fibres produced in Germany with low emissions from certified sustainable timber meet the needs of customers seeking products that have a low risk of sourcing from ancient and endangered forests. “Having been awarded a `green shirt´ in the `Hot-Button´ ranking once again underlines this absolutely clearly!” says Matthew North, Commercial Director at Kelheim Fibres.

More information:
Kelheim Fibres
Source:

Kelheim-Fibers

20.12.2019

Lenzing joint venture to build dissolving wood pulp plant in Brazil

  • Investment of approx. USD 1.3 bn in 500,000 t dissolving wood pulp plant
  • Key milestone to structurally strengthen cost leadership position
  • Significant step towards carbon neutrality

The Lenzing Group and Duratex announced that they will build a 500,000 t dissolving wood pulp plant in the State of Minas Gerais, near Sao Paulo (Brazil). The start-up is planned for the first half of 2022. In the joint venture, Lenzing holds a 51 percent, Duratex a 49 percent stake. The expected industrial CAPEX will be approx. USD 1.3 bn. The project is financed through long-term debt. The corresponding financing contracts are expected to be concluded at the end of the first quarter of 2020.

  • Investment of approx. USD 1.3 bn in 500,000 t dissolving wood pulp plant
  • Key milestone to structurally strengthen cost leadership position
  • Significant step towards carbon neutrality

The Lenzing Group and Duratex announced that they will build a 500,000 t dissolving wood pulp plant in the State of Minas Gerais, near Sao Paulo (Brazil). The start-up is planned for the first half of 2022. In the joint venture, Lenzing holds a 51 percent, Duratex a 49 percent stake. The expected industrial CAPEX will be approx. USD 1.3 bn. The project is financed through long-term debt. The corresponding financing contracts are expected to be concluded at the end of the first quarter of 2020.

Key milestone to structurally strengthen cost leadership position
The new dissolving wood pulp plant strengthens the Lenzing Group’s backward integration and cost position as well as its specialty fiber growth in line with its sCore TEN corporate strategy. The single-line dissolving wood pulp plant with an annual nameplate capacity of 500,000 tons will be the largest and most competitive production facility of its kind. Dissolving wood pulp is a key raw material required for manufacturing Lenzing’s biobased fibers. The joint venture will supply the entire volume of dissolving wood pulp to the Lenzing Group.

“Wood-based cellulosic fibers offer an important contribution to enhance sustainability in the textile industry. In line with its corporate strategy sCore TEN, Lenzing is committed to drive organic growth in this market. With this investment, we will become more competitive, act more independently and subsequently strengthen our market position. The trust and support of the main shareholders of Lenzing and Duratex were of great importance for this key project”, states Stefan Doboczky, CEO of the Lenzing Group.

Strong focus on sustainability
In planning the new production facility, particular importance was given to sustainability aspects. The joint venture secured FSC®-certified plantations1 covering an area of over 44,000 hectares to provide the necessary biomass. These plantations operate completely in accordance with the guidelines and high standards of the Lenzing Group for sourcing wood and pulp. The plant will operate among the highest productive and energy-efficient in the world and will feed the 40 percent of excess bioelectricity generated on site as “green energy” into the public grid. With this project, Lenzing sets a milestone in its strategy to carbon neutrality.

Source:

Lenzing AG

Sappi Europe
Sappi Europe
20.12.2019

Sappi joins Cepi in the 4evergreen alliance to boost the contribution of fibre-based packaging

Cepi, the European association representing the paper industry, has announced a new alliance called 4evergreen. The aim of the alliance is to boost the contribution of fibre-based packaging in a circular and sustainable economy that minimises climate and environmental impact. The alliance will increase awareness about the benefits of fibre-based packaging materials, advocate for EU legislation supporting product design for recyclability and call for the development of optimised collection systems and appropriate recycling infrastructures.

The rise of environmental awareness and consumer concerns, as well as the increase of packaging focused regulation, such as the Single Use Plastics Directive, have helped companies to accelerate the development of alternative packaging materials including fibre-based packaging with a view to helping consumers make more climate-friendly choices.

4evergreen was created as a forum to engage and connect industry members from across the fibre-based packaging value chain, from paper and board producers to packaging converters, brand-owners and retailers, technology and material suppliers, waste sorters and collectors.

Cepi, the European association representing the paper industry, has announced a new alliance called 4evergreen. The aim of the alliance is to boost the contribution of fibre-based packaging in a circular and sustainable economy that minimises climate and environmental impact. The alliance will increase awareness about the benefits of fibre-based packaging materials, advocate for EU legislation supporting product design for recyclability and call for the development of optimised collection systems and appropriate recycling infrastructures.

The rise of environmental awareness and consumer concerns, as well as the increase of packaging focused regulation, such as the Single Use Plastics Directive, have helped companies to accelerate the development of alternative packaging materials including fibre-based packaging with a view to helping consumers make more climate-friendly choices.

4evergreen was created as a forum to engage and connect industry members from across the fibre-based packaging value chain, from paper and board producers to packaging converters, brand-owners and retailers, technology and material suppliers, waste sorters and collectors.

“The 4evergreen alliance is important because it was born from an initiative of consumer product industry leaders who recognize the huge potential of fibre-based packaging in a circular economy” said Susanne Oste, VP Innovation and Sustainability at Sappi. “Their customers want sustainable packaging and fibre-based products provide the most climate-friendly solution available. Sappi is proud to play a part in this industry alliance. We have been investing heavily for more than 10 years in cutting edge research into real solutions for the problems that confront our customers. A recent success is the launch of the only fully recyclable confectionary wrapper on the market today.”

More information:
Sappi Europe
Source:

Sappi Europe