From the Sector

Reset
2945 results
26.07.2023

adidas: Preliminary second quarter results and full year guidance

adidas announced preliminary results for the second quarter of 2023. In Q2, currency-neutral revenues were flat versus the prior year level. In euro terms, the company’s revenues declined 5% to € 5.343 billion (2022: € 5.596 billion). The company’s gross margin was up 0.6 percentage points to 50.9% during the quarter (2022: 50.3%). Operating profit reached € 176 million in Q2 (2022: € 392 million), reflecting an operating margin of 3.3% (2022: 7.0%). The company’s top- and bottom-line development in the quarter was positively impacted by the first sale of some of its Yeezy inventory as announced at the end of May. In addition, the underlying adidas business also developed slightly better than expected.

Consequently, the company has updated its full year guidance. adidas now expects currency-neutral revenues to decline at a mid-single-digit rate in 2023 (previously: decline at a high-single-digit rate). At the same time, the company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is still anticipated to be around the break-even level.

adidas announced preliminary results for the second quarter of 2023. In Q2, currency-neutral revenues were flat versus the prior year level. In euro terms, the company’s revenues declined 5% to € 5.343 billion (2022: € 5.596 billion). The company’s gross margin was up 0.6 percentage points to 50.9% during the quarter (2022: 50.3%). Operating profit reached € 176 million in Q2 (2022: € 392 million), reflecting an operating margin of 3.3% (2022: 7.0%). The company’s top- and bottom-line development in the quarter was positively impacted by the first sale of some of its Yeezy inventory as announced at the end of May. In addition, the underlying adidas business also developed slightly better than expected.

Consequently, the company has updated its full year guidance. adidas now expects currency-neutral revenues to decline at a mid-single-digit rate in 2023 (previously: decline at a high-single-digit rate). At the same time, the company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is still anticipated to be around the break-even level.

Including the positive impact from the first Yeezy drop, the potential write-off of the remaining Yeezy inventory of now € 400 million (previously: € 500 million) and one-off costs related to the strategic review of up to € 200 million (unchanged), the company now expects to report an operating loss of € 450 million in 2023 (previously: loss of € 700 million).

If successful, potential future Yeezy drops would further improve the company’s results.

More information:
adidas AG financial year 2023
Source:

adidas AG

drop of orders (c) ACIMIT
26.07.2023

Italian Textile Machinery: 2nd Q 2023 Drop in Order Intake

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

ACIMIT president Marco Salvadè stated that, “The orders index for the second quarter elaborated by our Economics Department clearly shows a decline in new orders both in Italy and abroad compared to the previous year. The decline that usually precedes an event such as ITMA, the international textile machinery exhibition held last June in Milan, however, is part of a negative trend that has been going on for several quarters”.

Uncertainty appears to be weighing heavily especially on markets abroad, where foreign trade statistics updated to the first quarter of 2023 are marked by a slackening in Italian sales in some important reference markets, such as Turkey, China, the United States and Pakistan.

Salvadè added that, “Feedback from over 400 Italian companies that took part in ITMA is positive. It’s now necessary for the many contacts made during the event to materialize and for the demand for machinery in the main textile machinery markets to resume a path towards growth.”

More information:
ACIMIT orders index
Source:

ACIMIT

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS (c) Iluna Group
24.07.2023

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Corè
Luisa Amman, born in the late 19th century into a wealthy bourgeois family, married at a young age and became Marchesa Casati. "Corè" is the endearing nickname given to her by her lover Gabriele D'Annunzio, inspired by Kore, the Queen of the Underworld. She was a patron of the arts, an eccentric and transgressive collector. This theme celebrates opulence, from peacock feathers to Liberty-style designs in deep colours and warm metallic glimmers. An innovative proposal for the theme is the pleating technique, achieved directly in the weaving process of the Ultralight jacquardtronic laces.

Miss Viv
Vivienne Westwood, an extraordinary protagonist with an intense and irreverent life. Her insights have forever marked fashion and transformed the general standards of dressing. Rock and rebellious, she drew inspiration from street trends, anticipating avant-garde movements. In the 1990s, she brought back Tartan, mixing it with sensual roses in a maximalism that went against the prevailing trends, featuring vibrant colours. At the beginning of the third millennium, she grasped the importance of preserving the planet and left us with a motto that is more urgent and relevant than ever: "Buy Less, Choose Well, Make it Last." Within this theme, there is a new GRS-certified print that saves water, applied to ultra-fine Lurex nets, which are also certified.

Source:

Iluna Group

Abschlussbericht der MUNICH FABRIC START Foto: MUNICHFABRICSTART Exhibitions GmbH
24.07.2023

Abschlussbericht der MUNICH FABRIC START

Nach drei Tagen voller Programm, Networking, Inspiration und Fashionbusiness ist die 52. Ausgabe der internationalen Trade Show MUNICH FABRIC START zu Ende gegangen. Die Jubiläumsausgabe der Denim Trade Show BLUEZONE, die diesen Sommer ihren 20. Geburtstag feierte, die One-Stop-Sourcing-Plattform THE SOURCE und der Innovationshub KEYHOUSE haben wie geplant bereits am Mittwochabend ihre Türen für diese Saison geschlossen.

Trends: Das kommt Autumn.Winter 24/25
Aufgrund ihres in diesem Jahr erstmalig wesentlich früheren Sommertermins vergrößerte die MUNICH FABRIC START ihre Relevanz als Ort für frühen Trendresearch noch einmal. Die fünf entwickelten, zentralen ästhetischen Trends für die Herbst-/Wintersaison 2024/2025 unter dem Leitthema „each other“ waren in den Foyers des MOC flächig inszeniert: Highland Hybrids: ein Patchwork aus Natur, Tradition und Performance; Mystic Beings: die Fantasiewelt der Elfen, Helden, Monster und Roboter; System Cringe: eine Bewegung, die zum Handeln aufruft; Kinky Classics: provokativ extrovertiert mit Style und Past forward, ein retrofuturistischer Blickwinkel.

Nach drei Tagen voller Programm, Networking, Inspiration und Fashionbusiness ist die 52. Ausgabe der internationalen Trade Show MUNICH FABRIC START zu Ende gegangen. Die Jubiläumsausgabe der Denim Trade Show BLUEZONE, die diesen Sommer ihren 20. Geburtstag feierte, die One-Stop-Sourcing-Plattform THE SOURCE und der Innovationshub KEYHOUSE haben wie geplant bereits am Mittwochabend ihre Türen für diese Saison geschlossen.

Trends: Das kommt Autumn.Winter 24/25
Aufgrund ihres in diesem Jahr erstmalig wesentlich früheren Sommertermins vergrößerte die MUNICH FABRIC START ihre Relevanz als Ort für frühen Trendresearch noch einmal. Die fünf entwickelten, zentralen ästhetischen Trends für die Herbst-/Wintersaison 2024/2025 unter dem Leitthema „each other“ waren in den Foyers des MOC flächig inszeniert: Highland Hybrids: ein Patchwork aus Natur, Tradition und Performance; Mystic Beings: die Fantasiewelt der Elfen, Helden, Monster und Roboter; System Cringe: eine Bewegung, die zum Handeln aufruft; Kinky Classics: provokativ extrovertiert mit Style und Past forward, ein retrofuturistischer Blickwinkel.

Edutainment – zukunftsweisende und nachhaltige Anwendungsszenarien
Neben den umfangreichen Trendinformationen für Autumn.Winter 2024/25 bot die Messe ein vielfältiges Vortragsprogramm mit Paneldiskussionen, inspirierenden Keynotes und Lectures. Rund 35 Programmpunkte und über 50 Speaker:innen sorgten für ein umfangreiches Edutainment-Erlebnis.

One-Stop-Innovation & One-Stop-Sourcing
Im KEYHOUSE – dem Innovations- und Nachhaltigkeitshub der MUNICH FABRIC START – drehte sich einmal mehr alles um technologischen und ökologischen Fortschritt. Die Sustainable Innovations als Sonderpräsentationsfläche für herausragende Neuentwicklungen an der Grenze zwischen Start-up und Skalierbarkeit waren dabei erneut einer der absoluten Besucher:innenmagneten der Messe. Ebenfalls drehte sich in der Halle 2 des MOC in der Re:Source Area alles um Nachhaltigkeit. Die Metaplattform für zertifiziert ökologisch und sozial produzierte Stoffe und Accessoires zeigt die grünen Lösungen der Messeaussteller seit über zehn Jahren gebündelt an einem Ort und ermöglicht Besucher:innen so ein gezieltes nachhaltiges Sourcing.

Zum zweiten Mal fand am 18. und 19. Juli die Show in Show THE SOURCE als integrierte Area der MUNICH FABRIC START statt und rundete das MFS-Ecosystem in Richtung des Apparel Manufacturings ab. Rund 60 ausgewählte Bekleidungshersteller zeigten in der Halle 8 des Dampfdoms in der Motorworld und damit unmittelbar angrenzend an das MOC und die Zenith-Area ihre Produkt- und Serviceleistungen.

Ausblick
In die nähere Zukunft blickend richtet die MUNICH FABRIC START ihren Fokus nun auf drei wichtige, bereits festgelegte Termine: Zunächst findet die reVIEW Autumn.Winter 24/25 am 13. und 14. September 2023 – und bespielt damit den bisherigen Zeitraum von MFS und BLUEZONE – erstmals in der Motorworld statt und bietet der Branche damit wie gewohnt einen späten Ordertermin in München. Nur zehn Wochen später wird am 28. und 29. November 2023 bereits die preVIEW stattfinden und damit eine erste Ordermöglichkeit für die Spring/Summer Kollektionen für 2025 anbieten. Anschließend versammelt sich die Branche erneut für die MUNICH FABRIC START und BLUEZONE vom 23. bis 25. Januar 2024.

Source:

 MUNICHFABRICSTART Exhibitions GmbH

First show of ‘Best of Bangladesh’ in Europe (c) Bangladesh Apparel Exchange
24.07.2023

First show of ‘Best of Bangladesh’ in Europe

‘Best of Bangladesh’ -- the first ever sole ‘Made in Bangladesh’ show in Europe -- aims to open the doors for Europe to experience what the Bangladeshi industries has to offer.

As Bangladesh celebrates five decades of strong ties with Europe, in order to further strengthen the ties and deepen collaborations with the partners across Europe, Bangladesh Apparel Exchange, supported by the Bangladesh Embassy in the Netherlands, is organizing the event in Amsterdam, Netherlands on September 4th and 5th, 2023.

The ‘Best of Bangladesh’ aims to serve as a dynamic platform to showcase the progress and potential across diverse sectors of Bangladesh economy, especially manufacturing.

A total of 40 Bangladeshi companies each of which is the country’s best from apparel, textile, leather, Agro, jute, handicrafts, pharmaceutical, light engineering, digital industry, FMCG and bicycle will showcase their sustainable and innovative products in the Best of Bangladesh.  

‘Best of Bangladesh’ -- the first ever sole ‘Made in Bangladesh’ show in Europe -- aims to open the doors for Europe to experience what the Bangladeshi industries has to offer.

As Bangladesh celebrates five decades of strong ties with Europe, in order to further strengthen the ties and deepen collaborations with the partners across Europe, Bangladesh Apparel Exchange, supported by the Bangladesh Embassy in the Netherlands, is organizing the event in Amsterdam, Netherlands on September 4th and 5th, 2023.

The ‘Best of Bangladesh’ aims to serve as a dynamic platform to showcase the progress and potential across diverse sectors of Bangladesh economy, especially manufacturing.

A total of 40 Bangladeshi companies each of which is the country’s best from apparel, textile, leather, Agro, jute, handicrafts, pharmaceutical, light engineering, digital industry, FMCG and bicycle will showcase their sustainable and innovative products in the Best of Bangladesh.  

Bangladesh economy ranks as the world’s 37th largest now and it’s rapidly-expanding. The ‘Best of Bangladesh’ is being organized to accelerate interests and burgeoning engagements between the entrepreneurs and private sector entities on both European and Bangladeshi sides. The event has been structured to serve as a platform to showcase the multifaceted progress made and potential across diverse sectors of Bangladesh’s economy.

There will be an inaugural and 7 interactive panel sessions at the Best of Bangladesh on the topics ‘Bangladesh – Perspectives From An Emerging Economy’, ‘Bangladesh - Your Sustainable Sourcing Destination’, ‘Empowering the Future: Advancing Safety & Well-being for Garments Workforce in Bangladesh’, ‘Bangladesh Agro-Food: A Next Opportunity for Collaboration’, ‘Impact Investing - The Next Frontier’, ‘Sustainable Synergy: Circular Economy, Climate Action & Bangladesh’s Future’, and ‘Digitization and Digital Economy in Bangladesh’.

Source:

Bangladesh Apparel Exchange

24.07.2023

Rieter in first Half of 2023: Increase in sales, decrease in orders

In the first half of 2023, Rieter recorded a significant increase in sales of 22.2% to CHF 758.2 million, despite some cancellations or postponements of deliveries as a result of the earthquake in Türkiye. Cyclical market downturns in the individual market segments, which were already apparent in the second half of 2022, led to an order intake of CHF 325.0 million (-62.6%) in the reporting period, lower than in the corresponding period of the previous year.

Order intake in almost all regions was characterized by the reluctance to invest in new machines. Only in China did order intake increase due to investments by spinning mills in improving their local competitiveness. In addition, some customers held back pending investment decisions and waited for the innovations presented at ITMA in Milan in June 2023. At the same time, demand for consumables, wear & tear and spare parts declined due to the global market downturn.

In the first half of 2023, Rieter recorded a significant increase in sales of 22.2% to CHF 758.2 million, despite some cancellations or postponements of deliveries as a result of the earthquake in Türkiye. Cyclical market downturns in the individual market segments, which were already apparent in the second half of 2022, led to an order intake of CHF 325.0 million (-62.6%) in the reporting period, lower than in the corresponding period of the previous year.

Order intake in almost all regions was characterized by the reluctance to invest in new machines. Only in China did order intake increase due to investments by spinning mills in improving their local competitiveness. In addition, some customers held back pending investment decisions and waited for the innovations presented at ITMA in Milan in June 2023. At the same time, demand for consumables, wear & tear and spare parts declined due to the global market downturn.

On June 30, 2023, the company had a high order backlog of around CHF 1 100 million (June 30, 2022: around CHF 2 100 million). This therefore extends into the year 2024. As in the previous year, cancellations in the reporting period were around 5% of the order backlog, also impacted by the effects of the severe earthquake in Türkiye.

In the first half of 2023, Rieter posted a profit of CHF 25.2 million at the EBIT level, with an EBIT margin of 3.3% (first half of 2022: loss of CHF -10.2 million) and a net profit of CHF 13.3 million (first half of 2022: loss of CHF -25.2 million).

“Next Level” performance program planned
The challenging market situation over the past two years was marked by severe disruptions in the global supply chain in conjunction with rising material, energy, labor, and production costs. The current global demand for textile products remains at a low level. To increase long-term value for customers, employees, and shareholders, Rieter, as technology leader, is planning a performance program called “Next Level”. The goal of the program is to strengthen sales excellence, sharpen customer focus, improve cost efficiency in production and optimize fixed cost structures. The one-time cost of the program is anticipated to be around CHF 45 to 50 million, which will have an impact on the second half of 2023. Most of the program initiatives will be implemented before the end of 2023 with a view to achieving an expected impact from as early as 2024. With these measures Rieter is aiming to reduce operating costs by some CHF 80 million per year.

The program includes provisions for the net reduction of around 300 positions throughout the Group in relation to overhead functions. The possibility of further market- and volume-related adjustments in the order of 400 to 600 positions cannot be excluded. At the end of June 2023, Rieter had a global workforce of 5 555 employees.

Outlook
Given the economic situation and the ongoing cyclical market weakness, Rieter continues to expect below-average demand for new equipment in the coming months. A revival is not expected until the fourth quarter of 2023 at the earliest. Rieter also believes that demand for consumables, wear & tear and spare parts will not recover until later in 2023.

For the full year 2023, Rieter expects an EBIT margin of around 5 to 7% (including positive special effects of less than 2%) and sales at the previous year’s level of around CHF 1.5 billion.

Source:

Rieter Management AG

Innovation Award for Indorama Ventures and Polymateria Photo Indorama Ventures
21.07.2023

INDA Innovation Award for Indorama Ventures and Polymateria's Biotransformation Technology

Indorama Ventures, in partnership with Polymateria, has been honoured with the INDA Innovation Award for their collaboration in developing pioneering Biotransformation technology to create wipes, which totally biodegrade, leaving no harmful substance or microplastics behind.

The award was presented at the recent World of Wipes International Conference in Atlanta, USA, and recognizes the level of technical innovation and investment that led to developing wipes that both deliver against the sustainability challenges of today while meeting the demands of Indorama Ventures’ customers worldwide.

Through its 10-year partnership agreement with technology innovator Polymateria, Indorama Ventures is applying Polymateria’s unique biotransformation technology to fibers and spunmelt nonwovens. Biotransformation is the world's first biodegradation technology that is capable of delivering full biological consumption of Polyolefin products in the open terrestrial environment. Polyolefin-based materials produced by this technology are especially useful for applications where materials may be leaked into the environment as unmanaged waste.

Indorama Ventures, in partnership with Polymateria, has been honoured with the INDA Innovation Award for their collaboration in developing pioneering Biotransformation technology to create wipes, which totally biodegrade, leaving no harmful substance or microplastics behind.

The award was presented at the recent World of Wipes International Conference in Atlanta, USA, and recognizes the level of technical innovation and investment that led to developing wipes that both deliver against the sustainability challenges of today while meeting the demands of Indorama Ventures’ customers worldwide.

Through its 10-year partnership agreement with technology innovator Polymateria, Indorama Ventures is applying Polymateria’s unique biotransformation technology to fibers and spunmelt nonwovens. Biotransformation is the world's first biodegradation technology that is capable of delivering full biological consumption of Polyolefin products in the open terrestrial environment. Polyolefin-based materials produced by this technology are especially useful for applications where materials may be leaked into the environment as unmanaged waste.

“We are constantly innovating to live up to our responsibility to optimize the Earth’s resources, as we combine nature and science in our Biotransformation PP - designed to be recycled or returned to nature,” he said. “By bringing Biotransformation technology to Hygiene markets, we hope to offer a real-world solution to waste management. We particularly hope to address aspects of the creation of fugitive waste and remove this from the environment without causing additional, and potentially more dangerous, problems.”

WOW 2023 (c) INDA Association of the Nonwoven Fabrics Industry
21.07.2023

WOW 2023 with Attendance Records

INDA, the Association of the Nonwoven Fabrics Industry, announced the successful conclusion of the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. More than 495 senior-level leaders convened for new intelligence, connections, and business, which was a record turnout for the WOW event.

The 17th edition of WOW featured almost 60 tabletop exhibits, 26 presentations, and two pre-conference webinars. The program introduced Lightning Talks, “supersized elevator speeches” covering new trends, products, and ideas, and a 1.5-day revised WIPES Academy training course. WOW also featured a mentorship program for participants new to the wipes industry.

The WOW speakers shared their expert insights in these key topics:

INDA, the Association of the Nonwoven Fabrics Industry, announced the successful conclusion of the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. More than 495 senior-level leaders convened for new intelligence, connections, and business, which was a record turnout for the WOW event.

The 17th edition of WOW featured almost 60 tabletop exhibits, 26 presentations, and two pre-conference webinars. The program introduced Lightning Talks, “supersized elevator speeches” covering new trends, products, and ideas, and a 1.5-day revised WIPES Academy training course. WOW also featured a mentorship program for participants new to the wipes industry.

The WOW speakers shared their expert insights in these key topics:

  • Inflation, Supply Chain Issues, Capacity/Demand Balance
  • Plastic Policy: Closing the Intention-Action Gap
  • Sustainability and Manufacturing Practices
  • Consumer Market Data and Trends
  • Wipes Advancements
  • Transparency in the Supply Chain
  • Regulation, Innovation, Standards & Education in Flushability

World of Wipes Innovation Award®
The winner of the World of Wipes Innovation Award was the Nonwoven Wipe Using Biotransformation Technology developed by Indorama Ventures and Polymateria. This innovative 100% polypropylene spunlace wipe utilizes advanced biotransformation technology, meeting the BSI PAS 9017 specification. The wipe is compatible with mechanical recycling however, in the event it becomes fugitive, and exposed to heat, sunlight, air and moisture, will transform into a harmless, bioavailable wax at its end-of-life, returning safely to nature without leaving behind microplastics or toxins. This polypropylene wipe represents a significant leap towards eco-friendly, sustainable nonwoven hygiene products.

INDA announced that WOW 2024 will be held June 17-20, at the Hyatt Regency Minneapolis in Minneapolis, Minnesota.

More information:
INDA WOW nonwovens
Source:

INDA Association of the Nonwoven Fabrics Industry

20.07.2023

VDMA Textile Machinery: Planned PFAS ban threatens important textile machine components

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

Solid PFAS parts are widely used in textile machinery production, especially where extreme conditions prevail. Verena Thies, Managing Shareholder Thies GmbH & Co. KG, explains: “Our textile dyeing machines are world leaders and set standards in efficiency and sustainability. They work under pressure at temperatures of up to 140° C using highly acidic, highly basic and/or oxidative or even reductive chemicals. This is precisely why PFAS is needed, for example, in seals and rings, flaps as well as valves for a long-lasting and high-quality machine concept – because there are no alternatives with qualitatively equivalent properties. In addition, PTFE semi-finished products enable a sliding and gentle contact with the textile fabric in ecologically important techniques in the transformation of textile wet finishing."

PTFE and also FKM are fluoropolymers (fluoroplastics and fluoroelastomers), a group within the broad PFAS range of about 10,000 substances which would be banned for production, use and sale in the EU. They are high-tech materials, and as so-called "polymers of low concern" are not a danger to the environment, according to the OECD. Furthermore, these components are installed inside a machine and exchanged or disposed of properly. PFAS such as PTFE and FKM must be exempted from the ban, demands the VDMA in its position paper.

"In this way, the association also supports the approach taken in Great Britain. With the 10,000 substances, everything is lumped together, although the various PFAS groups are very different," warns Dr Sarah Brückner, Head of VDMA Environmental Affairs and Sustainability. "We should take our cue from the UK and look at the substance groups in a differentiated way."
Apart from several types of dyeing machines, PFAS components are indispensable in textile drying machines (e.g., conveyor dryers, tumblers and stenters) and damping machines. They are also used in fully automatic chemical dispensing systems and pressure vessels for thermochemical treatment of textile recycling material, heat recovery systems and wastewater treatment technology. This means that a lot of machines needed for a sustainable textile production would be affected by the PFAS ban.

VDMA Textile Machinery will take part in the ongoing EU public consultation. The association will describe indispensable key functionalities and conditions of use in the textile machinery sector as well as the consequences for the companies and the customers in the EU if the ban is imposed. The consultation ends on September 25, 2023, and VDMA urged its members affected by the planned restriction to participate in the consultation at an early stage. This is the only way to ensure that the broad scope of the mechanical and plant engineering sector is represented.

More information:
VDMA Textilmaschinen PFAS
Source:

VDMA e. V.
Textile Machinery

 

(c) CHIC / JANDALI MODE.MEDIEN.MESSEN
19.07.2023

Premiere for the CHIC Pavillon "Fashion China" at Who's Next

From 2 to 4 September 2023, twenty Chinese fashion brands will present themselves for the first time on an international platform under the umbrella of CHIC, China International Fashion Fair. On 900 sqm CHIC presents the FASHION CHINA pavilion at Who's Next with a selection of Chinese womenswear, menswear, sportswear, and hats.

Womenswear is represented by Ellassay, Laurèl (founded in Munich, Germany), JNBY, LUO ZHENG, RAXXY (women and men), KEYONE (hats for women, men, kids, no gender), Thread & Story, MAY D.WANG Cashmere & Silk, Yvonne CHOI, SE JIE, VAN SUNSUN, SELAH, EXTENDED, ARYA CASH, JORE BAUDRY, CANMADE and HEMPEL International.
Menswear is represented by KB Hong by K-BOXING and JOEONE. Exclusive sportswear will be shown by FENGGY.

FASHION CHINA is planned as a prelude to the presentation on further international platforms and is to complete CHIC's offer as a service point for Chinese fashion brands in the future.

From 2 to 4 September 2023, twenty Chinese fashion brands will present themselves for the first time on an international platform under the umbrella of CHIC, China International Fashion Fair. On 900 sqm CHIC presents the FASHION CHINA pavilion at Who's Next with a selection of Chinese womenswear, menswear, sportswear, and hats.

Womenswear is represented by Ellassay, Laurèl (founded in Munich, Germany), JNBY, LUO ZHENG, RAXXY (women and men), KEYONE (hats for women, men, kids, no gender), Thread & Story, MAY D.WANG Cashmere & Silk, Yvonne CHOI, SE JIE, VAN SUNSUN, SELAH, EXTENDED, ARYA CASH, JORE BAUDRY, CANMADE and HEMPEL International.
Menswear is represented by KB Hong by K-BOXING and JOEONE. Exclusive sportswear will be shown by FENGGY.

FASHION CHINA is planned as a prelude to the presentation on further international platforms and is to complete CHIC's offer as a service point for Chinese fashion brands in the future.

Around 500 exhibitors with international participation from Europe and Asia are expected at the next CHIC in Shanghai from 28 to 30 August. CHIC - China International Fashion Fair is organised by China National Garment Association in cooperation with China World Trade Center Co. Ltd.

More information:
CHIC Fair Fashion China Who's Next
Source:

CHIC / JANDALI MODE.MEDIEN.MESSEN

TEXAID x PUMA partnership for Swiss RE:FIBRE take back program Photo: TEXAID / Puma
19.07.2023

TEXAID x PUMA partnership for Swiss RE:FIBRE take back program

As a leading company in the collecting, sorting, reselling, and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. Working together with brands and retailers, TEXAID and their partners are continuing to take action to shift from a linear to a circular system.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability. To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID continues to expand its offering for in-store collection programs throughout Europe and the USA

As a leading company in the collecting, sorting, reselling, and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. Working together with brands and retailers, TEXAID and their partners are continuing to take action to shift from a linear to a circular system.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability. To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID continues to expand its offering for in-store collection programs throughout Europe and the USA

Aligned with the launch of the PUMA Switzerland 23/24 Women’s World Cup home jersey, PUMA and TEXAID have partnered for the Swiss division of their RE:FIBRE Program. PUMA is working to have a more sustainable, long-term solution for recycling polyester jerseys. To achieve this goal, they have developed their RE:FIBRE Program, which transforms textile waste, along with other used materials, into new textiles.

To enable this textile to textile program in Switzerland, specific feedstocks are requires, which is TEXAID’s role as the operator of the collection and sorting. Newly launched in the PUMA Zurich location at Jelmoli, customers can bring garments of all brands and deposit them in-store. TEXAID collects and sorts all deposited items, sending eligible polyester garments into the PUMA RE:FIBRE program, to be recycled into new garments. All other garments are channeled by TEXAID to their next life cycle.

Source:

TEXAID Textilverwertungs-AG

Freudenberg: Sustainable microfiber solution for artificial leather applications (c) Freudenberg Performance Materials Holding GmbH
Evolon® sustainable microfiber coating substrate for artificial leather
19.07.2023

Freudenberg: Sustainable microfiber solution for artificial leather applications

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Evolon® sustainable microfiber coating substrates
Evolon® microfiber fabrics are ideal coating substrates for artificial leather applications in the shoe, furniture and car industries. They are particularly suitable as a carrier material for PU and PVC coatings. Evolon® microfiber materials have non-fraying edges, which makes converting easier and quicker. They contain 80% recycled PET from Freudenberg’s in-house bottle recycling plant. Furthermore, they are manufactured with no solvent and no chemical binder in the company’s Evolon® plant located in Colmar, France. The plant is accredited according to OEKO-TEX STeP sustainability manufacturing certification and the DETOX TO ZERO criteria. European manufacturing offers logistic benefits to European customers through shorter supply chain and transport routes.

Reinforcement material for leather goods
Manufacturers of leather goods also benefit from Evolon® microfiber when they use it as a reinforcement material for original leather. It is drapable and soft and provides optimal shaping support for leather. In addition, Evolon® materials offer important sustainability advantages for the manufacturing of luxury leather bags, such as being 100% made in Europe, eco-friendly and socially-responsible production, and the use of recycled raw materials.

Source:

Freudenberg Performance Materials Holding GmbH

(c) Baldwin Technology Company Inc.
13.07.2023

Baldwin releases latest PrintEnomic$ eBook

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – Baldwin explores four trends in the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook:

  • The resurgence in book publishing
  • Labor challenges
  • Direct mail marketing as a cure for screen fatigue
  • Sustainability
Source:

Baldwin Technology Company Inc.

Charity Tennis Tournament hosted by the Alexander Zverev Foundation and WorldChanger BOGNER
13.07.2023

BOGNER: Charity Tennis Tournament hosted by the Alexander Zverev Foundation and WorldChanger

On June 26, 2023, the Alexander Zverev Foundation and WorldChanger founder Robert Laner hosted an exclusive charity tennis tournament at the Bio and Wellness Resort Stanglwirt in Tyrol, Austria.

Based on the motto "helping by playing", 24 top-class athletes and celebrities came together to play tennis doubles for a good cause. Participants in this special event included Olympic champion and two-time ATP world champion Alexander Zverev, actress and presenter Palina Rojinski, influencer & entrepreneur Pamela Reif, soccer world referee Dr. Felix Brych, ski legend Maria Höfl-Riesch, actor Herbert Knaup, rapper Kool Savas, ski jumper Gregor Schlierenzauer, actor Hans Sigl, tennis legends Barbara Schett and Charly Steeb, soccer world champion Roman Weidenfeller, influencer Younes Zarou, and many more.

On June 26, 2023, the Alexander Zverev Foundation and WorldChanger founder Robert Laner hosted an exclusive charity tennis tournament at the Bio and Wellness Resort Stanglwirt in Tyrol, Austria.

Based on the motto "helping by playing", 24 top-class athletes and celebrities came together to play tennis doubles for a good cause. Participants in this special event included Olympic champion and two-time ATP world champion Alexander Zverev, actress and presenter Palina Rojinski, influencer & entrepreneur Pamela Reif, soccer world referee Dr. Felix Brych, ski legend Maria Höfl-Riesch, actor Herbert Knaup, rapper Kool Savas, ski jumper Gregor Schlierenzauer, actor Hans Sigl, tennis legends Barbara Schett and Charly Steeb, soccer world champion Roman Weidenfeller, influencer Younes Zarou, and many more.

BOGNER took part in this event and equipped the participants with suitable sports and tennis wear. The collected proceeds of more than 100,000 euros will benefit the Alexander Zverev Foundation, which supports children and young people affected by diabetes. The Alexander Zverev Foundation is helping to raise awareness and acceptance of diabetes within the public discourse, as Alexander Zverev himself is affected by the disease. To wrap up this unforgettable experience, the tennis tournament then evolved into an exclusive Red Carpet evening event. The invited guests met for the award ceremony and a closing speech by Alexander Zverev and Robert Laner on the topic of "Diabetes, the right mindset on the way to the world's best and positive change" at the mountain chalet Hüttlingmoos, directly below the Wilder Kaiser. The grand finale of the day in the mountains was then the outdoor party, again in Hüttlingmoos, with live music from the Fast Boys and star DJ Topic.

More information:
adidas Charity
Source:

BOGNER

13.07.2023

EURATEX comments ecodesign legislation

July 12, the European Parliament adopted its position on the Ecodesign Regulation, which aims to improve the environmental sustainability and circularity of products placed on the EU market, including textiles.

While EURATEX recognises the importance of accelerating the green transition and welcomes the progress on the legislation, it regrets the EP’s approach to target the textile industry in a Regulation designed to be a framework legislation for all sectors.  

Representing 160 000 European textile companies, EURATEX has been highlighting that a successful legal framework is based on an inclusive and feasible approach, ensures sufficient capacity and sets a timeline for businesses to adjust. Therefore, EURATEX welcomes MEPs’ call for tailored support and smooth transition for SMEs. Strongly advocated by EURATEX, the European Parliament also strengthens the provisions on market surveillance, which is a key element for ensuring level playing field for EU companies in the Single Market.

July 12, the European Parliament adopted its position on the Ecodesign Regulation, which aims to improve the environmental sustainability and circularity of products placed on the EU market, including textiles.

While EURATEX recognises the importance of accelerating the green transition and welcomes the progress on the legislation, it regrets the EP’s approach to target the textile industry in a Regulation designed to be a framework legislation for all sectors.  

Representing 160 000 European textile companies, EURATEX has been highlighting that a successful legal framework is based on an inclusive and feasible approach, ensures sufficient capacity and sets a timeline for businesses to adjust. Therefore, EURATEX welcomes MEPs’ call for tailored support and smooth transition for SMEs. Strongly advocated by EURATEX, the European Parliament also strengthens the provisions on market surveillance, which is a key element for ensuring level playing field for EU companies in the Single Market.

As businesses already face difficulties to navigate through all ongoing policy and legislative initiatives, EURATEX appreciates the efforts of the EP to ensure legislative consistency, the lack of which may only create additional costs and administrative burdens for companies. The inclusivity and transparency of the future Ecodesign Forum have indeed received a positive boost.

EURATEX regrets that the European Parliament has overlooked the plea for legislative coherence on substances of concern and for keeping the ESPR aligned with existing chemical legislation to avoid overlapping or conflicting regulation. EURATEX advises that social sustainability aspects should be addressed within the due diligence legislative framework.

Regarding the future Ecodesign requirements for textiles, these will have to be based on reliable data, and supported by thorough analysis and impact assessments. The requirements should be set out in the textile-specific Delegated Act and should be developed with relevant stakeholders.

As the ESPR trialogue negotiations between the European Parliament, the Council of the EU and the European Commission unfold in autumn, EURATEX continues to stress the guiding principle of “fit-for-purpose” rules and the balance between high environmental objectives and competitiveness of companies.

Moreover, on Tuesday 11 July, the European Parliament's position on Industrial Emissions Directive (IED) was adopted by MEPs with 396 votes in favour, 102 against and 131 abstentions. EURATEX expresses concerns on this text because of the inclusion of standalone finishing plants in the scope of the new IED. This creates inconsistencies with the recently finalised Textile BREF document (adopted in Sevilla by all parties), which regulates industrial emissions for both pretreatments and finishing plants. Standalone finishing companies, typically SMEs, now face challenges to comply with specifications which were originally designed for different and bigger companies.

More information:
Ecodesign Regulation Euratex
Source:

Euratex

Premium, Seek (c) Premium Exhibitions GmbH
13.07.2023

PREMIUM and SEEK: A new heartbeat

The PREMIUM and SEEK teams around Anita Tillmann and Jörg Arntz prove their skills with the success of the new Trend and Event Platform. The format, newly shortened to just two days, showed a total of 450 curated, international brands of the new generation, with 250 brands at PREMIUM and 200 brands at SEEK. The motto was quality over quantity. In addition to the brands, the focus was clearly on the know-how of experts from sustainability, tech, and business. If you didn't discover or learn anything new in the last two days you missed out. Visitors from all over the world came to Station Berlin to see what the Premium Group had come up with for this edition - and it did not disappoint.

PREMIUM reinvents itself
The newly curated brand portfolio with many international and unexposed brands were very well received by the community and invited buyers and visitors to explore a diverse, exciting, and coherent brand landscape. The atmosphere was characterised by lightness, lots of sunshine, and good conversations.

The PREMIUM and SEEK teams around Anita Tillmann and Jörg Arntz prove their skills with the success of the new Trend and Event Platform. The format, newly shortened to just two days, showed a total of 450 curated, international brands of the new generation, with 250 brands at PREMIUM and 200 brands at SEEK. The motto was quality over quantity. In addition to the brands, the focus was clearly on the know-how of experts from sustainability, tech, and business. If you didn't discover or learn anything new in the last two days you missed out. Visitors from all over the world came to Station Berlin to see what the Premium Group had come up with for this edition - and it did not disappoint.

PREMIUM reinvents itself
The newly curated brand portfolio with many international and unexposed brands were very well received by the community and invited buyers and visitors to explore a diverse, exciting, and coherent brand landscape. The atmosphere was characterised by lightness, lots of sunshine, and good conversations.

For the first time, PREMIUM and the Fashion Council Germany joined forces to present the showroom "CURATED by Fashion Council Germany" with avant-garde designers from Germany and Ukraine. The tech format Yonnaverse addressed the most important innovations for profitability and sustainable growth through digital progress. The event took place physically, digitally, and in the Metaverse.

Iranian artist and milliner Maryam Keyhani showed what surrealism marketing and tangible art can look like with her oversized hat, which floated happily over the grounds and caused surprised faces. The installation by the Italian designer Innerrraum from Berlin was dedicated to Anita Tillmann in gratitude for her international success. Artists such as Sophie Douala from France, Claudia Gillies from New Zealand, and Grycja Erde from Ukraine were a welcome addition in making the PREMIUM visit an experience.

The diverse portfolio also included a range of beauty brands and the beauty lounge offered much-loved make-up, hair and nail touch ups. There were also many new things to discover in the retail sphere. Vintage & Rags presented a new retail concept for second-hand fashion and SPSR showed how to take retail entertainment to the next level through unique live consumer engagement. On the Content Cube stage, Daniel Steindorf, the former owner of Überfahrt, spoke with Inga Klaassen from J'N'C about hospitality fusion, community, and retail, next to other speakers.

SEEK put a stronger focus on sustainability
As in previous editions, a relaxed and positive mood prevailed at SEEK. The community was happy to finally fall into each other's arms again. SEEK convinced with high-quality and original brands and an even stronger focus on sustainability. For the first time, SEEK's brand portfolio consisted of 50% sustainable brands, further strengthening the Conscious Club and allowing it to flourish. The Conscious Club was supported by the sustainability experts from studio MM04, whose 202030 - The Berlin Fashion Summit Denim Pop-up ensured a full Content Cube.

Decision-makers and fashion professionals discussed the learnings of the denim transformation, the new green claims of the EU textile strategy as well as pragmatic solutions on how to remain and act more sustainable and competitive as an industry and individual brand. As a counterpart to Black Friday, Cold Friday, initiated by Dojo Cares, was presented as the "biggest awareness campaign since sales days have existed". Fair fashion and fair working conditions were the focus of the final conference of the "Good Clothes Fair Pay" press conference by Fashion Revolution, which was also part of the Conscious Club. On top of a lot of sustainability inspiration, for the first time there was a space for D2C brands such as VGB and ADR Atelier Roupa, who were involved both as brands and as speakers in the content programme. For two days, two stages were filled with talks and panels with the most relevant themes from fashion, lifestyle, culture and business. Gen Z, Gen Y and Gen Alpha met for espresso martinis and club culture vibes at "Platte raves the Ground" to discover and stage the coolest styles of the scene.

More information:
PREMIUM SEEK
Source:

Premium Exhibitions GmbH

Wedding Dress Design with Stratasys’ 3DFashion Technology (c) Stav Peretz
12.07.2023

Wedding Dress Design with Stratasys’ 3DFashion Technology

Ada Hefetz, an Israel-based wedding dress designer, has introduced a new attention-grabbing collection with intricate, showstopping elements produced using Stratasys’ advanced direct-to-textile 3D printing technology. Showcased recently at Milan Design Week, the three unique dresses are based on Hefetz’s Flower of Life theme and were produced using Stratasys’ 3DFashion™ technology as part of her latest series celebrating matrimonial union, the circle of life, and design.

Known for designing haute couture bridal dresses combining vintage style and classic modern chic, Ada Hefetz is renowned for constantly pushing the boundaries of design. This is her first completed project using 3D printing.

Ada Hefetz, an Israel-based wedding dress designer, has introduced a new attention-grabbing collection with intricate, showstopping elements produced using Stratasys’ advanced direct-to-textile 3D printing technology. Showcased recently at Milan Design Week, the three unique dresses are based on Hefetz’s Flower of Life theme and were produced using Stratasys’ 3DFashion™ technology as part of her latest series celebrating matrimonial union, the circle of life, and design.

Known for designing haute couture bridal dresses combining vintage style and classic modern chic, Ada Hefetz is renowned for constantly pushing the boundaries of design. This is her first completed project using 3D printing.

The wedding dresses feature complex geometrical shapes, depicting the ‘Flower of Life’, a sacred geometry dating back to ancient Egypt. The intricate pattern is composed of overlapping circles that intersect to form flowers, which Ada Hefetz has combined with her design of a lily to symbolize the union between two individuals and the circle of life. The inspiring design uses Stratasys’ translucent VeroVivid™ resin material with Stratasys’ J850™ TechStyle™ 3D printer, which can be printed in over 500,000 unique colors with varying levels of flexibility, simulating different textures and finishes.

Ada Hefetz’s Flower of Life-themed 3D printed wedding dresses are currently on display at Milan’s D-House Urban Laboratory, which is owned and managed by Dyloan, the leading Italian manufacturer serving the high-end fashion sector.

More information:
Stratasys 3D printing materials
Source:

Stratasys

12.07.2023

Autoneum: Acoustic comfort with Zeta-Light

With Zeta-Light, Autoneum adds an integrated damping function to fiber-based trim components such as carpets or inner dashes, significantly improving their acoustic performance. Thanks to the innovative use of particle dampers, Zeta-Light not only insulates and absorbs airborne noise, but also effectively reduces low-frequency vibrations of the car body, independent of temperature. In addition to improving the acoustic comfort of vehicle occupants, the new damping system also contributes to significant weight savings and simplified vehicle assembly. Zeta-Light will celebrate its world premiere at this year's Automotive Acoustics Conference on July 11 and 12 in Zurich, Switzerland.

With Zeta-Light, Autoneum adds an integrated damping function to fiber-based trim components such as carpets or inner dashes, significantly improving their acoustic performance. Thanks to the innovative use of particle dampers, Zeta-Light not only insulates and absorbs airborne noise, but also effectively reduces low-frequency vibrations of the car body, independent of temperature. In addition to improving the acoustic comfort of vehicle occupants, the new damping system also contributes to significant weight savings and simplified vehicle assembly. Zeta-Light will celebrate its world premiere at this year's Automotive Acoustics Conference on July 11 and 12 in Zurich, Switzerland.

To ensure a quiet and comfortable driving experience, car manufacturers rely on components that attenuate airborne as well as structure-borne noise in the vehicle interior. Autoneum’s latest innovation, Zeta-Light, meets both of these acoustic requirements. The integrated particle dampers developed by Autoneum complement the sound-insulating and -absorbing properties of fiber-based, lightweight and sustainable technologies such as Hybrid-Acoustics ECO+ or Prime-Light with a new function for damping low-frequency vibrations of the vehicle body. Compared to conventional damping alternatives, Zeta-Light thus allows for the effective reduction of both noise and vibration in a wider frequency range and at lower weight. Moreover, the acoustic performance of the particle dampers is not affected by temperature.

The concept of Zeta-Light is as innovative as it is effective: Small particles are enclosed in thin non-woven capsules and integrated into the car body side of noise-insulating components such as carpets or inner dashes. The capsule transfers the vibrations of the vehicle body to the particles and sets them in motion. Damping is achieved through collisions and friction between the individual particles. In comparison to acoustic components with an integrated heavy layer, Zeta-Light from Autoneum thus enables effective and temperature-independent treatment of low-frequency structureborne noise at a lower weight. For example, replacing the standard spring-mass system of a trunk floor carpet in an electric vehicle with Zeta-Light particle damping mounted on Autoneum's sustainable and lightweight Hybrid-Acoustics ECO+ technology can reduce the weight of the damping package by up to 25% while maintaining the same acoustic performance.

More information:
Autoneum Automotive acoustic
Source:

Autoneum Management AG

Premium Group: Anita Tillmann hands over to Jörg Arntz Photo: Premium Exhibitions GmbH
Jörg Arntz and Anita Tillmann
12.07.2023

Premium Group: Anita Tillmann hands over to Jörg Arntz

The Premium Group, an European event and trade fair organiser for fashion and lifestyle, is entering a new chapter: founder Anita Tillmann is handing over to her business partner Jörg Arntz and the experienced management team. After almost 21 years of successful management, serial entrepreneur Anita Tillmann will retire from operating business at the end of this year. She will remain with the Premium Group as a strategic advisor.

The Premium Group, an European event and trade fair organiser for fashion and lifestyle, is entering a new chapter: founder Anita Tillmann is handing over to her business partner Jörg Arntz and the experienced management team. After almost 21 years of successful management, serial entrepreneur Anita Tillmann will retire from operating business at the end of this year. She will remain with the Premium Group as a strategic advisor.

Jörg Arntz, the long-standing managing director of Premium Group, will continue to lead the company as managing director, with the strategic support of Anita Tillmann. Operational implementation and content development will continue with the proven PREMIUM and SEEK teams in line with the formats. "I am delighted to have had Anita by my side over the past 10 years. The goal remains to strengthen the Premium Group's position as a forward-thinking and established platform in the national and international markets. We challenge traditional KPIs, develop sustainable business models hand-in-hand with the industry and share this know-how with our communities. We will continue to drive innovation and growth in close exchange with the industry. The demand for an organised industry meeting in Berlin is still very high. We are firmly convinced that the relevance of personal exchange will become even more important in the future and with it modern platforms like PREMIUM and SEEK."

Source:

Premium Exhibitions GmbH

adidas celebrates next Gen Icons of the Game (c) adidas AG
Lena Oberdorf, Mary Fowler and Alessia Russo
12.07.2023

adidas celebrates next Gen Icons of the Game

adidas unveils its new campaign to celebrate the FIFA Women’s World Cup Australia & New Zealand 2023™. The campaign is dedicated to next gen icons Alessia Russo, Lena Oberdorf and Mary Fowler and looks to drive more global attention for the game and inspire other young women and girls to follow in their footsteps.

Marking adidas’ most impactful Women’s World Cup campaign to date, the brand unites its global family of football legends and advocates of the women’s game. Headlined by a series of fast-paced films, the campaign welcomes a star-studded line up of David Beckham, Leon Goretzka and Ian Wright, actor and football fan, Jenna Ortega, as well as Argentina’s World Cup hero, Lionel Messi. They come together to celebrate the skills that Russo, Oberdorf and Fowler are renowned for, from vision and interception to power, creativity and accuracy.

adidas unveils its new campaign to celebrate the FIFA Women’s World Cup Australia & New Zealand 2023™. The campaign is dedicated to next gen icons Alessia Russo, Lena Oberdorf and Mary Fowler and looks to drive more global attention for the game and inspire other young women and girls to follow in their footsteps.

Marking adidas’ most impactful Women’s World Cup campaign to date, the brand unites its global family of football legends and advocates of the women’s game. Headlined by a series of fast-paced films, the campaign welcomes a star-studded line up of David Beckham, Leon Goretzka and Ian Wright, actor and football fan, Jenna Ortega, as well as Argentina’s World Cup hero, Lionel Messi. They come together to celebrate the skills that Russo, Oberdorf and Fowler are renowned for, from vision and interception to power, creativity and accuracy.

The films are part of a new creative proposition from adidas for the upcoming tournament. ‘Play Until They Can’t Look Away’ aims to platform and showcase some of the world’s greatest football players on the biggest stage – whose skills and passion for the game demand global attention and support.

Set against the soundtrack of SL2’s iconic song, On a Ragga Tip, fans see World Cup winner, Lionel Messi, alongside Mary Fowler, guiding both viewers and Jenna Ortega across the world to Fowler’s home country of Australia , with preparations for the biggest women's sporting moment underway.

Meanwhile, David Beckham and Ian Wright, alongside his granddaughter, Women’s Arsenal FC player, Raphaella Wright-Phillips, are unable to look away in a supermarket as Russo spectacularly weaves her way through the narrow aisles, in her own creative fashion. Finally, Goretzka is expertly interrupted while bowling as Oberdorf whizzes around an arcade, powerfully intercepting balls in each scene to achieve a high score of her own.

Paying respect to those who have gone before, the films are also filled with subtle references to memorable moments that football super fans will revel in, including shirt numbers, iconic tournament balls, plus much more.

More information:
adidas AG Sportswear
Source:

adidas AG