From the Sector

Sales expected to be realized in financial years 2020/2021
At ITMA 2019, the Rieter Group signed contracts for seven projects with Cotton & Textile Industries Holding Company, Cairo (Egypt), for a total volume of around 180 million Swiss francs.

The order intake for the first six projects in the amount of around 165 million Swiss francs was booked upon receipt of the down payment on October 7, 2019; sales are expected to be realized in financial years 2020/2021. The order includes deliveries of compact and ring spinning systems and is

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

• Borealis’ EverMinds™ ambition moves industry one step closer to plastics circularity thanks to new recycling technology and improved recyclate
• Borealis also announces significant material improvements to existing Purpolen® recyclate materials

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the introduction of a new plastics recycling technology, Borcycle™. This evolving technology will be used to produce high-quality compounds made of recycled polyolefins (rPO) such as the newly-launched Borcycle™ MF1981SY, an rPO with over 80% recycled content intended for use in visible appliance parts. Borealis also announces a series of significant material improvements to existing recyclates in the established Purpolen™ brand portfolio. These market launches and product improvements are important technology advancements and thus accelerate the transformation to a circular economy of plastics. Borealis and its wholly-owned subsidiary, mtm plastics, will showcase the new Borcycle technology and recyclate innovations at the K 2019 in October.

Borealis is leading the industry by applying its Visioneering Philosophy™ to the development and implementation of novel polyolefins-based solutions that enable plastics reuse, recycling, and recovery, and by designing for circularity. These wide-ranging activities are gathered under the symbolic roof of EverMinds™, the Borealis platform dedicated to promoting a more circular mind-set in the industry. By capitalising on its profound expertise in virgin polyolefins and collaborating with value chain partners, Borealis keeps discovering new opportunities for business growth within the circular economy.

Advancing technology to bring about polyolefin circularity

The new technology, Borcycle, transforms polyolefin-based waste streams into recyclate material such as pellets. As a transformative technology, it complements the existing Borealis virgin polyolefins portfolio with a range of pioneering, circular solutions. It unites state-of-the-art technology with the profound Borealis polymer expertise gained over decades.

As a scalable and modular technology, Borcycle has been developed to meet growing market demand for high-quality recyclate. Leading appliance brand owners, for one, have pledged to increase the amount of recycled plastics in their goods. Yet until recently, producers have not been able to rely on a consistent supply of high-quality recyclate. The Borcycle technology will help address this challenge. Compounds made using the Borcycle technology deliver high performance, add value and offer versatility. Producers and brand owners in a range of industries will profit from the availability of high-quality recyclate that helps them meet environmental and regulatory challenges.

“Advancing technology is crucial if our aim is to implement value-creating solutions in the circular sphere,” claims Maurits van Tol, Borealis Senior Vice President, Innovation, Technology & Circular Economy Solutions. “‘Building tomorrow together’ means innovating, collaborating, focussing on the customer, and above all – taking action. The launch of our new recycling technology Borcycle is tangible proof of our commitment to achieving plastics circularity.”

New and improved recyclate for high-end applications

Borcycle™ MF1981SY is the first of several upcoming launches of rPO solutions made under the umbrella of the Borcycle technology. Borcycle™ MF1981SY will be available to Borealis customers in Europe. The compound is an exciting addition to the rPO portfolio because it is a 10% talc-filled compound that contains over 80% recycled material. It offers an ideal balance between stiffness and impact. The compound is especially suited for use in visible black parts, for example in small appliances.

Like its relatives in the mtm plastics family of recyclate materials, Borcycle™ MF1981SY is a truly sustainable offering. Recyclates from mtm save approximately 30% of CO2 emissions compared to virgin materials.

A number of significant improvements have been made to existing recyclate grades in the Purpolen portfolio.

“Mechanical recycling is presently a most eco-efficient method to implement the principles of the circular economy,” explains Guenter Stephan, Head of Mechanical Recycling, Borealis Circular Economy Solutions. “Borealis and mtm plastics are leveraging their respective areas of expertise to make significant progress in achieving polyolefin circularity by upscaling recycling output and ensuring the reliable supply of high-quality plastics recyclate for European producers, in particular.”

The Lenzing Group intends to acquire the remaining 30 percent of its Chinese subsidiary Lenzing (Nanjing) Fibers Co. Ltd. (LNF) from its state-owned joint venture partner NCFC. After closing of the transaction, the Lenzing Group will hold 100 percent of LNF. The underlying structured selling process was initiated by the joint venture partner in a state controlled bidding process and today the Lenzing Group received the Share Purchase Agreement draft. The closing of the transaction documents is expected for the end of October. The acquisition will have a negative impact on net profit of the Lenzing Group of approx. EUR 21 mn for the fiscal year 2018.

The purchase of the shares supports Lenzing’s strategic growth as a producer of specialty fibers from the renewable raw material wood in China and worldwide. It paves the way to setting up further production lines for specialty fibers. Lenzing wants to convert LNF into a specialty fibers hub over time.

• At Kingpins Show Amsterdam (24-25 October) the new “Committed Accessories” dedicated to denim take centre stage.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

NO IMPACT: “Committed Accessories” expanded

It is the constant search for sustainable innovation that reveals the extent of the progress made over the past few months by Metalbottoni. For the Kingpins Show exhibition, there are many novelties in store from the company, extending its range in terms of sustainability. Firstly, there is the new MONSTER line eco-processing, special for pure denim, which – apart from metal – includes new material solutions developed through high-profile collaborations.

Also the LEATHER ACCESSORIES line is extending its range of sustainable materials. The line of tags and rear waistband labels is enhanced through interpretations based on two new eco-friendly materials: recycled jacron and cork. For denim designed to be 100% green, also in accessories. Sustainable proposals are increasingly integrated throughout the Metalbottoni range, for example the new glossy and satin finishing developed for the line LABORA on exclusive metal accessories.

Partnerships with brands from northern Europe: Bik Bok and Kings of Indigo

One of the most important collaboration in sustainable fashion is the one with the Norwegian brand Bik Bok. The brand that was founded in 1973 dedicated to young women, today offer accessible trend driven fashion through a network of over 200 single-brand stores in Norway, Sweden, Finland and Austria. The brand has since 2017 chosen to use only BCI (Better Cotton Initiative) certified cotton for their in house premium denim brand Never Denim. For Never Denim Metalbottoni has realized a series of jeans buttons and personalized rivets, all entirely produced according to the NO IMPACT protocol; which means recycled raw materials, no use of chemical agents, through processing and machinery that minimize the use of water and electricity, resulting 100% from photovoltaic panels. All these features are part of a capsule developed for the new AW 2018 collection for Never Denim entirely made with Fair Trade certified cotton. Thanks to this project, the No Impact becomes an integral part of a collection that is aimed at a very large, young and aware public.

Another important brand which has chosen the new NO IMPACT metal accessories is Kings Of Indigo, the Dutch denim mill which is presenting top-quality jeans, inspired by traditional American style, combined with Japanese attention to detail, which today has as many 250 authorised dealers in 12 countries, with a very strong focus on northern Europe.

More and more sportswear for the new Monster SS 2020 collection

The great Metalbottoni classic dedicated to denim confirms the trend of strongly merging with the world of sportswear. The MONSTER line introduces the style developments of the SS 2020 season, with the range being more and more influenced by technical and sports interpretations, alongside sustainable production processes based on the NO IMPACT protocol. The new MONSTER proposals include items made of non-metal material, using sustainable processes, of natural origin and 100% biodegradable; these accessories are similar in appearance to traditional polyester, interpreted in a responsible way, developed through a series of special and unique effects. Also the button, rivet and small plate range has been restyled, having always been the core of the MONSTER line. Today the number of solutions available increases  hanks to new vintage finishing, developed on metal accessories, which are also totally green. “The denim world is moving in a clear direction: that of sustainability.” says Maria Teresa Ricciardo, Creative Director at Metalbottoni, “This is true in particular for some markets, which are strategic for us, and where we are proving increasingly successful, thanks to constant product and process research from a green  perspective, which Metalbottoni today is able to offer within the framework of the NO IMPACT pathway which we have been pursuing for a long time”.

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

Thanks to its partnership with Itema, Prosperity Textiles makes again a step forward in terms of sustainable innovation, as one of the first denim producers able to successfully turn - even the weaving production - green. A partnership that is planned to be showcased in some of the most important textiles exhibitions worldwide focusing on Asian and denim markets. A path that starts with KingpinsShow, Amsterdam (October 24-25) where the Chinese denim producer will put into the spotlight this brand-new solution aimed at further increasing the eco-driven approach of the company; an important appointment is also in the Itema calendar: the ITMA Asia + CITME 2018 exhibition, Shanghai (October 15-19) where the Italian company showcased the important green step-forward in denim weaving processes and the full range of its innovations.

iSAVER™: the ideal green tool for denim weaving
This new technology, developed by ItemaLab™, the Itema Advanced Innovation Department, isable to completely eliminate the left-hand weft waste, allowing to insert the weft yarns in the fabric without the need of additional yarns. iSAVER™ significantly reduces raw material waste, leading to tangible benefits in terms of machine’s efficiency, cost reduction and energy saving.

Just consider that the weaver will gain a minimum saving of € 2.000 per year per machine, and our planet will gain even more. In fact, for the first time in the weaving industry, a sustainable approach when choosing the weaving equipment is now possible. Thanks to iSAVER™, 1.000 Kg of cotton per machine per year – the 3% of the total raw materials - will be saved, thus avoiding the waste of 20 million liters of water, equivalent to 400.000 showers.

Numbers are clear: the introduction of iSAVER™ clearly sets a new benchmark in terms of sustainability within denim fabric production. Furthermore, the iSAVER™ is one of the key features of the Itema R95002denim, the rapier weaving machine born and designed to weave denim guaranteeing to weavers superior textile quality, outstanding user-friendliness and tangible energy and raw materials saving.

A joint eco-driven path
Itema, understanding very well the importance of saving resources and energy to drive the textile production in the direction of a more conscious manufacturing, focused its attention to develop breakthrough weaving solutions and in 2018 introduced to the market the iSAVER™, a revolutionary device dedicated specifically to denim fabrics able to eliminate the waste selvedge on the left-hand side of the fabric.

This is one of the reasons-why Prosperity Textiles has chosen to adopt this extraordinary technology for its new facility. Today Prosperity Textiles is one of the main denim producers worldwide, counting 1,300 employees and 20 offices worldwide. Moreover, a second state-of-theart denim mill will be inaugurated in Vietnam by the end of 2018.
What makes Prosperity able to stand out on a global scale, is not simply its products high quality but the ability to conciliate flawless denim fabric production with a sustainability-oriented mindset that permeates every stage of their textile supply chain.

Prosperity, indeed, adopted innovative green manufacturing concepts through all stages of the company’s operations, from product development, raw materials procurement and processing, to natural resources and energy utilization including waste management. Prosperity’s denim production is based on the employment of best quality yarns available on the market, while still targeting the most sustainable sources, from BCI to organic, recycled cotton, and from Tencel™ Lyocell to Sustans™, in 2017, more than 20 million yards fabric sales from Prosperity are with sustainable fibers inside.
The introduction of eco-friendly dyeing and finishing practices allows the company to create beautiful indigo shades and performance denims, with less water and energy consumption compared to the traditional systems. Last year, Prosperity produced 20% more fabrics than 2016, yet the water and electricity use and greenhouse gas emission was down by 11.5%, 7.9% and 5.4% respectively.

In this continuous process of improvement and contribution to a greener industry and planet, plays a central role the recent renewal of the historic partnership and strategic alliance with Itema – the leading manufacturer of cutting-edge weaving solutions – which represents the natural evolution of a constant process of research for partners able to support Prosperity Textiles’ growth as a sustainable company.
Up to now, all innovations and efforts done in this regard addressed the traditionally more polluting steps of the denim production. In fact, if the development of green technologies is nowadays spread in many fabric processing stages, such as finishing and dyeing, weaving was not yet capable to provide sustainable solutions to weavers.

• Textile Exchange’s Sustainability Conference - Milan, October 22-24, 2018
• The theme of the 2018 conference is United by Action: Accelerating Sustainability in Textiles and Fashion.

The conference offers an opportunity to connect with industry pioneers and learn about cutting edge solutions and innovations in textile and apparel sustainability. As a result, C.L.A.S.S., headquartered in Milan, the global resource for smart material innovation, education, marketing and communication, will be on hand to support this year’s theme.

Many of the materials the C.L.A.S.S. team will showcase speak to circular economy such as Re.VerSo™, Bemberg™ and ROICA™ by Asahi Kasei, Iluna Group and TINTEX Textiles and many others that use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

During Textile Exchange’s Sustainability Conference, Giusy Bettoni, C.L.A.S.S. CEO and Founder and her team will have a dedicated space to engage attendees in an open discussion regarding the importance of fashion business strategies. The experience in the space, that will reflect an New York event created for C.L.A.S.S. by Ginger Design, will start with the vision of a film by Cristina Picchi that represents harmony between the various phases of the textile process and the cycles of natural elements. Visitors will walk through a three-dimensional installation designed by Cécile Feilchenfeldt to inspire creativity and explore the limitless possibilities using innovative smart materials.

“We are always proud to have a presence at international events including this year’s Textile Exchange’s Sustainability Conference. It is a great way for us to share our expertise regarding responsible innovation and new business model strategies. As C.L.A.S.S. is headquartered in Milan, we are proud that they selected our city for this year’s conference. Being held in Milan provides a chance for us to support Textile Exchange regarding smart material innovation, many of them produced in Italy.” said Bettoni.

Just off their return from Première Vision in Paris, Bettoni who is also the Sustainability Consultant for Smart Creation, recognizes the importance for her company to have a strong international presence to spread C.L.A.S.S.’ message to a global audience regarding responsible creation. 

As C.L.A.S.S. enters their second decade of business, they have expanded their business activities to include e-commerce that provides an opportunity for fashion start-up to purchase up to a maximum of 50, an initiative launched to support fashion start-ups. And a new division, C.L.A.S.S. Education, an initiative Bettoni co-founded with James Mendolia, also a Professor, Fashion Institute of Technology. Mendolia has been visiting universities to speak to fashion design, business, textiles and production students in Europe, Asia and North America to encourage attendees to infuse a new way of design thinking and move from a linear to a circular business model.   

• For the first time @Interfilière New York edition, the award winning Interfeel’Award Sustainability ILUNA Group with ROICA™ by Asahi Kasei
• Interfilière New York, 17th–18th October 2018, booth 113

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of emb roidery and guipure are all produced with only recycled materials.

In addition to the launch of the Embroidery Division, this season novelties include:

1. Since  September  2018,  Iluna  Group’s  products with the right percentage of transformed content are GRS (Global Recycled Standard) certified.

2. Of  major  interest  today,  the  launch  of eco - velvet lace  entirely made  of  sustainable  materials  including ROICA Eco - Smart™  Family, Tencel™ Lyocell and  Q - Nova® .

3. Within  the Black  Label  collection,  the  Ultralight series  is  enriched  with  new  multicolor geometric  and floral galloons and allovers: here Iluna changes the color of  the  thread  not  only  in  the background,  but  also  in  the design,  the  same  article  reinvents  itself  in a  variety  of great visual impact.

4. Green   Label   collection, the   Iluna   dedicated range featuring a new responsible approach in respect of the  planet  and  people, able  to deliver  innovation,  beauty and quality, at 360°. In addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring new stretch Galloon laces fully made with GRS certified recycled materials,  including  the  stretch  thanks  to the introduction of the  unique ROICA™ sustainable yarn part of the ROICA Eco - Smart™ Family.

5. ILUNA has  strategically  included  in  all  their  stretch  laces  only ROICA Eco- Smart™  Family of sustainable yarns since some time.

6. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification  that  clarifies  and  communicates  the  company’s  sustainable  production  commitment. In
addition to this, all products are Oeko - Tex 100 certified.

7. ILUNA has  created  the  new e- shop offering  its  exclusive  materials  to  smaller companies   looking   for   added   values   as: creativity,   innovation,   made   in   Italy   and responsibility.

8. The  whole  collection  is  also  visible online at  its  web  site,  previous  registration, and   orders   can   be   done   directly   online always aiming to customers care.

Nevertheless, for ILUNA smart innovation is not   just   a   project even,   its   space at Interfilière will  be  the stage  where visitors will have  the  opportunity  to  discover the new  collection and to also  to experience and  touch latest boundaries  of  lace smart innovations.

Today ILUNA represents the largest European lace producer, and thanks to its journey toward the most contemporary  way  to  innovate  that  includes  responsibility,  has  also  become  a  reference  point  in  the
international market for a lace offer that is beautiful, innovative and responsible at the same time.  An  alchemy  of  design  and  sustainable  innovation, the  only  eco-fashion  line  that  includes  lace  and stockings,  capable  of  combining  ethics  and  high  quality  standards  with  a  fashion  image  of  bright  and deep colors.

Bobingen - Trevira GmbH, Germany, is again participating as an exhibitor at this year’s Building Healthcare show in Dubai, from 2-4 October. The manufacturer of high-value polyester fibres will present a large variety of fabrics made by 12 partners from inherently flame retardant Trevira fibres and yarns.

Modern furnishing concepts for healthcare environments are making increasing demands in terms of quality, functionality, colouring and hygiene. Perfectly matched materials and colour concepts in the interior not only help to provide good orientation for the residents, but also create more attractive spaces. In addition, the use of appropriate textiles such as curtains, drapes, blinds and sliding panels, fabric-covered dividing panels, upholstery and bedding textiles, can improve the room acoustics, protect your privacy and let the room appear in a pleasant light. In healthcare environments where hygiene and cleanliness are of particular importance, antimicrobial textiles may be used.

Trevira CS® and Trevira CS Bioactive® create a safe, attractive and comfortable environment in hospitals, clinics, spas, care homes and all other sectors in the contract sector.

Trevira CS Bioactive® contract textiles combine flame retardant and antimicrobial functions, which makes them the ideal material for use in healthcare facilities. They inhibit the growth of bacteria, prevent the formation of odours in/on the fibre and keep the textiles fresh for a longer time. The permanent flame retardant and bioactive properties of their fibres is integrated at molecular level, meaning that they remain unaffected by repeated washing, abrasion and ageing. This gives them an advantage over textiles with only a supplementary surface finish.

Trevira CS® and Trevira CS Bioactive® fabrics for the healthcare sector presented at the show stand come from these suppliers: Delius, Dina Vanelli, Fidivi Tessitura Vergnano, Gebrüder Munzert, JAB, Mattes & Ammann, Pugi, Rubelli, Rudolf Breuer Mechanische Weberei, Schmitz Textiles/drapilux, Subrenat, Verotex.

Trevira CS® and Trevira CS Bioactive® fabrics meet the requirements of the relevant international fire safety standards and can be certified according to the IMO regulations for the maritime sector. All Trevira fibres and yarns carry the Oekotex Standard 100 certificate. They are manufactured in accordance with the highest standards for sustainable products. A broad variety of collections with thousands of designs are available in Trevira CS® worldwide.

• In its aim to promote composites materials, JEC Group will highlight the latest technologies that enable the automotive industry to innovate in product design, emission reductions and production.

Paris - In its mission to address composites end-use industries specifically, JEC Group, the world leading organization for the promotion of composite materials, moves up a gear to target the automotive industry. Introduced many decades ago in car manufacturing, and not only for high-end performance models, composites are now offering many alternatives to steel and aluminum, thanks to their specific features, which go far beyond their lightweight properties.

“Today, nearly 2.9 cars are produced and sold worldwide every second. Yet growth potential is still enormous. In value, the automotive industry makes up 20% of the total composites market with promising opportunities for lighter, stronger and more efficient materials in the years to come. They offer new design opportunities, enable a reduction in tooling investment and allow several functions to be integrated in one, on top of their corrosion and impact resistance. Furthermore, composite materials contribute to the development of a new generation of cars, offering innovative battery integration solutions for electric vehicles, as well as a new generation of fuel storage tanks for hydrogen-powered vehicles. JEC Group is moving forward in its strategy to democratize and promote the use of composites materials among end-user segments that, in this case, are OEMs and car manufacturers,” said Ms Frédérique MUTEL, JEC Group President & CEO.

The BMW i3 the largest-volume production car ever to extensively use composites for emission-free mobility

With this in mind, JEC Group will invest in a significant number of composites pavilions at key automotive events in Europe, America and Asia. The first of these will be at Mondial.Tech Paris, part of Paris Motor Show, held on October 2-6, 2018 in Paris. The composites pavilion will include an innovation showcase, expert presentations and networking activities.

The second composites pavilion will be at the North American International Auto Show in Detroit on January 14-18, 2019 and will focus on the same goals of sharing knowledge and developing networking.

Additional events, particularly in Asia, are being planned to cover the global automotive market.

Although the composites pavilions are organized by JEC Group, they will be supported by major composites manufacturers. These combined efforts will enable stands to showcase several solutions provided by composites for the automotive industry, driving innovation in this sector.