From the Sector

• Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
• All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
• Global legislators aim at limiting plastic waste persisting in the environment for centuries
• EU Single-Use Plastics Directive partly regulates usage of plastic products
• Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

Montalvo, international specialists in web tension control, announces its latest addition to their growing load cell portfolio, the N Micro Cantilever Load Cell. N Micro Load Cells are ideal for narrow web, light tension applications requiring precise, superior tension control measurement. Montalvo’s N-Micro load cell are commonly used in applications producing labels, tapes, and more, delivering higher quality results for higher quality end product.

Director of Sales and Marketing, Bryon Williams says, “Montalvo is one of the few web tension control specialists continuously developing new products for the constantly evolving industry. The N Micro is designed for narrow web applications, often running multiple webs of material that all need to be precisely tensioned at the same amount to effectively perform as one end product. It is a cost-effective solution for these applications whether they are running web or more.

Young, all-Italian dream-team will lead Pinko to a next level

Pinko looks ahead. Evolution & revolution are the keywords for the new management’s strategies. For the first time, President Pietro Negra will be supported by an all-Italian young team to build the success of the brand from now on. Research and innovation have always been part of the Pinko DNA: once again, they lead the path to cutting edge management.

The Pinko family grows with figures fully trained in the realms of fashion, luxury and retail, the actual Pinko R-evolution kickstart. “We pondered on Pinko’s future,” says Pietro Negra, President of Cris Conf in Fidenza (Parma), which he founded with his wife Cristina Negra and which controls Pinko. “This is just the beginning of a bigger project to be disclosed step by step in the next few months. The company turnover is a crucial point for any family business willing to preserve its independence. We believe in the power of younger generations. Therefore we created an all-Italian team to boost an already successful business model.”

Federico Bonelli, with experiences in Ernst & Young, The Boston Consulting Group and Bain & Company has been appointed General Manager. Emanuele Bianchi, previously in Diesel Coccinelle and Dolce & Gabbana, takes on as Marketing & Communication Director. Cecilia and Caterina Negra, the founders’ daughters and pivotal figures of Pinko’s success, confirm their roles leading respectively the Communication and the Creative department. Caterina Salvador becomes Director of Style and Product after working in Giorgio Armani, Hugo Boss, Calvin Klein, Dolce & Gabbana, Coin. More talents will be eventually hired.

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

The GCIRT members are: ARCHROMA (Switzerland); CHT Germany GmbH (Germany); Colourtex Industries Private Limited (India); DyStar Singapore Pte Ltd (Singapore); Huntsman Textile Effects (Singapore); KISCO (Korea); Pulcra Chemicals Group (Germany); RUDOLF GmbH (Germany); TANATEX Chemicals B.V. (Netherlands).

Mayer & Cie. (MCT) is premiering the OVJA 1.1 EETT at the industry’s leading trade fair, ITMA. A premium jacquard machine, it is part of the focus on sports of the company’s “Stay a winner: With Mayer & Cie.” presentation in Barcelona. The industry leader developed the OVJA 1.1 EETT especially for the manufacture of shoe uppers now that “fabrics” are in demand for sports and leisure footwear. The OVJA 1.1 EETT comes with double electronics and double transfer technology, which is reflected in an extra variety of patterns and, in particular, in innovative hole structures.

“The OVJA 1.1 EETT is yet another machine in our portfolio with which customers can claim to be on the winning side in keeping with our ITMA slogan ‘Stay a winner: With Mayer & Cie.’,” says Marcus Mayer, Managing Director of Mayer & Cie. in charge of technical development. “The OVJA 1.1 EETT is most definitely a premium machine and the right choice for especially exacting requirements such as multi-coloured spacer fabrics with a 3D effect or a wide range of hole structures.”

Following its successful beginnings in summer 2018 and its expansion in January 2019, TRADE UNION will be developed yet further as a dedicated space for selected brands and agencies.
 
“TRADE UNION is very close to our hearts,” explains SEEK Director Maren Wiebus. “Being able to work together to fill a space with life, interact with customers and products, and tell authentic stories in a laid-back, relaxing atmosphere – this open-minded, collaborative approach is ultra-modern and of the minute in its simplicity. We are all in the same big boat and can consider ourselves lucky that colleagues and customers are and have become friends. Together, we can achieve a lot this way.”

It has always been integral to SEEK’s DNA to continually work with partners and friends to develop new concepts that are perfectly suited to the demands of the market. The carefully curated setting of TRADE UNION, featuring brands such as Eat Dust, Porter-Yoshida & Co and Knickerbocker, is especially popular with the top buyers.
 
Felix Engelmann has supported the concept right from the off through his marketing agency Haptiques, and is full of passion and on board again with the concept this season.
“The TRADE UNION concept really came off for us in January. We worked well with our partners; the vibe was positive and nicely relaxed. I’m expecting the atmosphere in the summer to be just as fantastic and I’m sure it’ll be a good occasion with friends, partners and employees.”
 
In July, buyers can look forward to an expanded portfolio including Red Wing Shoes, a brand from Minnesota. European Marketing Manager Rik van Dijk comments:
“We can't wait to attend the inspiring setting, because our buyers really feel at home there. We need a location where you can take a step back, find a quiet place to sit and talk to everyone. The extra space at the TRADE UNION guarantees this. We’ve only heard good things from friendly brands and we’re really looking forward to the trade show.”

From the machine to the assistant
"With our groundbreaking new M-TYPE DELTA sewing system, we redefine industrial sewing and enable solutions that were previously unthinkable," says Dietrich Eickhoff, CEO of the Dürkopp Adler Group, at the world premiere at the Texprocess 2019 in Frankfurt: "The sewing machine becomes an assistant, partner, helper and communicator. This is a significant difference to all previous machine concepts and offers an incredible number of new possibilities! "

The new M-TYPE DELTA sewing system is a fully digitized industrial sewing machine for materials such as leather, upholstery and technical textiles. Thomas Brinkhoff, Director of Marketing Dürkopp Adler Group, explains: "We produce the perfect seam with this machine, whatever the situation, without the need for conversion." This is ensured by the new smart sewing kinematics, which immediately achieve the best sewing results without having to mechanically change the machine.

The training of the operator is reduced to the absolute minimum, because the machine shows the user with video support what to do and how to do it right. With sophisticated sensor technology, the M-TYPE DELTA ensures that virtually no loss of valuable materials occurs through bad stitches or missing threads.

An integrated usage- or time-controlled maintenance assistant indicates upcoming work. Service work can be documented in the machine and retrieved at any time. This reduces machine downtime to an absolute minimum.

"Anyone who wants to sew individualized products industrially can gain the decisive competitive advantage with this sewing system," emphasizes Dietrich Eickhoff, "because the M-TYPE DELTA is perfectly prepared for use in the necessary machine networks such as our QONDAC system."

Govier plans to scale the organization and take customer focus to the next level to drive growth
Kornit Digital, (NASDAQ: KRNT), a global market leader in digital textile printing technology, announced today that Chris Govier has been named Managing Director at Kornit Digital Europe GmbH.

Govier is a proven leader who brings broad experience of supporting customers with industrial digital transformation, a proven record of driving growth, and solid experience building and managing world class teams. In his new role, Govier will oversee Kornit Digital’s operations in Europe, the Middle East and Africa (EMEA) and will be instrumental in scaling up Kornit’s business.

Govier previously served in sales and general management roles at Xerox Corporation, and holds a BA from the University of Wellington, New Zealand.

Commenting on the appointment, Gilad Yron, Kornit Digital’s Executive Vice President of Global Business, said, “I welcome Chris on board as the new Managing Director of Kornit Digital Europe. He brings with him solid experience in the analog-digital transition in industrial print and deep regional understanding. Europe has traditionally been a strong performer for Kornit, and Chris’ expertise will help us grow the organization to the next level.”

“This is an incredibly exciting time to join Kornit Digital – their technology, coupled with a passion and drive will significantly disrupt the textile printing industry.” said Chris Govier. “EMEA represents a huge opportunity and I look forward to building on the fantastic success achieved so far.”

First showing of game-changing technology at a European tradeshow includes the recently launched Kornit Atlas, Kornit Avalanche Poly Pro and Kornit Presto
Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, has announced details of its corporate presence at Fespa 2019 which will take place in Munich, Germany, May 14-17.

Kornit’s exhibit will focus on the game-changing technology that was unveiled in the beginning of the year and will now be on display for the first time in a tradeshow in Europe: the Kornit Atlas and the Kornit Avalanche Poly Pro. The presence will be complemented by a Kornit Storm HD6, a direct-to-fabric sample area featuring prints from Kornit’s upcoming Presto system and an installation of Colorgate’s Textile Production Server for Kornit.

The Kornit Atlas is a heavy-duty system created for super-industrial garment decoration businesses. It is designed to deliver a typical annual production capacity of up to 350,000 impressions, optimizing production efficiency and cost of ownership. The Kornit Atlas is aimed at highly productive garment decorators, mid to large size screen printers and innovative businesses looking to combine state-of-the art technology with lowest cost of ownership, making it easier than ever to address the requirements of leading and mid-sized brands, as well as new generation digital brands. The Kornit Atlas uses water-based Kornit NeoPigmentTM Eco-Rapid Inks which are eco-friendly, GOTS approved and OEKOTX certified, and serve as the main driver of the retail quality prints.