From the Sector

 Global Health Exhibition is Saudi’s first healthcare trade platform for the global market and takes place in Riyadh from 10 to 12 September. Saudi Arabia is considered a growing market particularly in the healthcare sector and this exhibition is the response to this development. Over three days visitors can discover the latest products and developments from more than 180 companies from 25 countries. Trevira GmbH is also exhibiting at this show in order to present innovative fabrics from 13 of its customers made from flame retardant fibres and yarns.

In terms of quality, functionality, colouring and hygiene, the requirements on modern furnishing concepts in the healthcare sector are becoming more and more demanding. Perfectly matched materials and colour concepts in the interior help to provide good orientation for the residents and create more attractive spaces. In addition, the use of appropriate textiles such as curtains, drapes, blinds and sliding panels, fabric-covered dividing panels, upholstery and bedding textiles, can improve the room acoustics, protect your privacy and let the room appear in a pleasant light. In healthcare environments where hygiene and cleanliness are of particular importance, antimicrobial textiles may be used.

The 2019 World Textile Forum closes its doors after two successful and exciting days.

On September 9 and 10 renowned speakers and experts from the textile business gathered in Zurich to discuss opportunities in the changing textile world. Exciting talks and keynotes illustrated new possibilities for a more sustainable and digital textile industry. While one part of the versatile program focussed on “Sustainable Sourcing” with speakers such as Robert van de Kerkhof (Lenzing AG), Heinz Zeller (Hugo Boss), Daniel Gemperle (Calida) and Anna Maria Rugarli (VF), the topic of “Digital Production” became the centre of attention later thanks to experts like Torbjörn Netland (ETH), Maximilian Kürig (Karl Mayer), Maria Neidhold (Spoonflower) and Holger Max-Lang (Lectra). They offered new perspectives on the sustainable future of the textile industry, presenting innovative sustainable production and business models. The subsequent panels furthered the knowledge exchange between both attendees and speakers and led to lively discussions.

Swiss Textile Federation, Swiss Textile & Fashion Institute STF and Gherzi Textil Organisation would like to thank all attendees and look forward to the next World Textile Forum!

• Circularity at the centre

PG DENIM, the designer project by Paolo Gnutti, is ready for several important events scheduled for the autumn with ground-breaking interpretations and a new – increasingly green – business model. The occasion is its participation in the Blue Zone at Munich Fabric Start (Munich, 3-5 September 2019), a space which is increasingly often reserved for companies and projects with a high innovation rate in the world of denim.

PG DENIM at the German exhibition will be presenting important product innovations, but most notably new concepts developed for the S/S 2021 season. The focus here is on circularity, seen from a dual perspective: the product with the no longer traditional alternation of seasons, and a sustainabilityoriented approach.

Seasons meet

The new PG DENIM approach is geared towards overlapping seasonality, with less and less marked separations between projects dedicated to the spring-summer and fall-winter lines. The collections by PG DENIM can thus be increasingly defined as a “mix of products without seasonality”. Its focal points are innovation alongside the concept behind the initial idea, as opposed to just the season. This trend, explains Paolo Gnutti, CEO and R&D Head at PG DENIM, is also due to registering the fact that seasonality – in terms of environment and trends – is changing at an increasingly rapid pace. As a response to this situation, the choice has been made to design new collections starting from macro-trends and presenting fabrics for garments which are “easy to wear”, suitable for both warm and cold temperatures, in a true melting pot  of weights and sizes.

The lines for the previous season are thus reintroduced and restyled playing with weights and sizes, within a range where flock meets ultra-light fabric bases, or where vinyl is combined with typically summer weights which shift the fabric towards the world of “paper” with crispy touches, resulting in extraordinarily lightweight and strong items at the same time. Also the GARAGE DENIM has been upgraded with fluid and smoothed touched for garments which are easy to wear and have a strong personality.

Partnership with The Denim Window

The PG DENIM season is also enhanced by its partnership in The Denim Window project, which has resulted in a limited series of Creative Capsule Collections, derived from the idea of bringing together companies which had already worked or were working together, trying to highlight – through small capsule collections – the best of what had already been produced by traditional businesses. This has resulted  in three trailblazing capsules, two of which designed in partnership by PG DENIM and companies the likes of M&J Group, Cadica and Greenwear. Several copies of these collections have been made to travel the world, and – after the official presentation in July – they will have a special corner, The Denim Window, in the Bluezone at Munich Fabric Start.

The “Circular Programme” and the five “Rs” of sustainability

Also the PG DENIM approach to accountability in production processes has been enhanced by implementing the “Circular Programme”. As part of our corporate vision, Italian-style production is combined with compliance with what have become known as “the five Rs”, that is to say key concepts underlying the design and manufacturing model: Reduce (everything you are not using), Repair (everything you can), Reuse (anything available to you), Recycle (all that is left), Respect (everything around you).

This is the philosophy underlying each individual process at PG DENIM, and leading to new specific programmes which have been its business focus over the past few months:

1) Reducing the environmental impact during the fabric dyeing phase in reaction and sulphurbased processes, where the use of chemicals has been reduced by 40%, water consumption by 50% and CO2 emissions by 60%, which has also resulted in better penetration and a better result in the crocking process. This has led to producing 10 new articles which will be launched on the market.

2) Recycling all waste from processing and after use, creating a range of garments where cotton is actually obtained from regenerating these two kinds of waste. In this regard, PG DENIM for now is the only company on the market able to process with a percentage of recycled product exceeding 60% of the total, whereas the average for this kind of manufacturing is generally about 35%.

As regards regular production, on the other hand, PG DENIM follows stringent international standards, including Dtox, Reach and Gots in all its processing phases, also using BCI cottons and the Organic Cotton Standard for raw materials. Last but not least, it was recently awarded the GRS (Global Recycled Standard) certification.

With “Acoustic Garage”, Autoneum launches an online configurator for the acoustic management of vehicles as the first automotive supplier worldwide ever. The portal offers a comprehensive information and product experience on all aspects of noise protection in cars. In addition, users can customize various acoustic components according to their individual requirements. In this way, Autoneum supports vehicle manufacturers in ensuring optimal acoustics in future models. Acoustic Garage is now available for free at acoustics.autoneum.com.

Autoneum not only sets benchmarks in automotive noise and heat protection with its innovative components and technologies, but now also with its online application Acoustic Garage. The new and especially user-friendly configurator allows interested parties – whether customers, science representatives or end consumers – to design a customized noise protection package at the touch of a button.

For the first time, Italian textile company Manteco showcases its ultimate innovations at Première Vision’s Smart Creation, the fair’s most cutting edge epicentre showcasing visionary innovators pushing for a sustainable change and making the difference in the fashion business. The Prato-based company is leader in the production New Generation Recycled Wool thanks to a specially designed KM0, traceable and circular economy model.

Behind the sustainable approach and the premium quality textiles there are generations of ‘saper fare’ - know-how, in Italian -, indeed, Manteco’s products are not only responsibly Made in Italy but imbued with the skills of the artisans and makers working within 10 kms around the company. “Made in Italy does not mean processing high-quality materials with international technologies and then label the final product for export. It means products grown, taken care of and handcrafted in the country.” Says Matteo Mantellassi, CEO of Manteco. “But there’s a further step to this: harnessing the local ‘genius loci’, meaning the skills, traditions and human potential of a territory. We are proud to say that since 1943 we have always been 100% Made in Italy.”

• Production capacities increased to 320,000 tons p.a.
• Investments of EUR 60 mn enhance self-sufficiency and strengthen autonomy from market prices
• Project serves as a significant economic driver in the region

Lenzing AG, producer of pulp and fibers from the renewable raw material wood, has concluded its expansion and modernization drive at the pulp plant at the Lenzing site. The company invested EUR 60 mn for this purpose, increasing production capacities for dissolving pulp extracted from beech wood from 300,000 to 320,000 tons per year. The coming on stream of the additional pulp capacities over the past weeks strengthens Lenzing’s self-supply of pulp in accordance with the sCore TEN corporate strategy.

“The successful expansion brings us closer to achieving our strategic objective of increasing our self-supply of pulp to a level of 75 percent, thus making us even more resistant to price fluctuations in sourcing pulp”, says Stefan Doboczky, CEO of the Lenzing Group. “We are also pleased that this project enables us to make a further significant contribution towards strengthening the Lenzing site as well as the regional economy”, Mr. Doboczky adds.

The expansion drive was completed in less than two years. In addition to 100 Lenzing Group employees, numerous external partner companies from Upper Austria and neighboring regions were involved in implementing the project. About 40,000 working days were needed by external companies in order to install the delivered machinery on site. The Lenzing Group secured additional jobs due to the pre-production work required in the factories of these suppliers.

In line with the corporate strategy of the Lenzing Group, the self-supply of dissolving wood pulp will be successively increased in the coming years to 75 percent of consumption. At present, Lenzing’s own pulp plants in Lenzing and Paskov (Czech Republic) cover 60 percent of the Group’s pulp requirements. The Lenzing site primarily makes use of beech wood which is not suitable for producing furniture, whereas it mainly relies on spruce wood in the Czech Republic. The remaining dissolving wood pulp is sourced from a variety of hardwoods and softwoods from international partners. In this case, in the spirit of sustainability, Lenzing applies procurement rules which are just as strict as when it purchases wood for its own pulp production.

With Alpha-Liner, Autoneum launches its first-ever textile wheelhouse outer liner that not only reduces tire noise substantially, but also convinces with low weight. This newest lightweight component ensures a quiet driving experience and also helps vehicle manufacturers meet current and future noise and emission limits. Alpha-Liner premieres at the “Automotive Acoustics Conference” which takes place in Zurich,
Switzerland, on July 9 and 10.

Alpha-Liner is the latest innovation from Autoneum – a multifunctional wheelhouse outer liner that reduces tire noise with high efficiency and thus makes the vehicle quieter and lighter. Alpha-Liner is based on Autoneum’s newly developed technology, with which noise absorption can be adapted to the specific requirements of the vehicle model for the first time. To achieve this effect, a thin coated surface is applied on the tire side. The porosity of the coating can then be controlled according to the necessary absorption properties, the bottom part of the wheelhouse outer liner requires stronger noise treatment, which maximizes acoustic absorption.

• This new version of Modaris speeds up the time to market for collections

Paris – Lectra launches Modaris® V8R2, the latest version of its patternmaking, grading and prototyping 2D/3D solution. This new version of Modaris, the most widely used modeling solution by leading brands in fashion and apparel, offers greater speed, efficiency and precision in product development. With its powerful 3D simulation and collaboration tools, patternmakers are developing patterns faster and speeding up their decision-making procedures. By reducing or eliminating physical prototyping, product development is less expensive and the time to market is as close as possible to trend detection.

To preserve and strengthen its position as a market leader of product development software, Lectra, with this upgrade of Modaris, is giving particular focus to 3D virtual prototyping. Patternmakers can now share with their partners, 360-degree videos, accessible on any device. Designers in response are able to visualize, comment, and approve the style and fit using the new 3D Style module.

New advances have made it possible to reduce the number of physical prototypes by up to 50%. Modaris V8R2 improves the quality of the solution’s 3D simulations and expands its library with new assets (fabrics, 3D top-stitching effects, realistic scenes, lighting studios, Pantone® and Natural Color System®©,…). The solution is now compatible with Vizoo, a high-quality scanner that brings forth a heightened realism to the appearance of fabric swatches, and with other 3D solutions such as Maya, 3DS Max, Iray to make the digital renderings of the prototypes more true-to-life and accurate.

One of the innovative developments of Modaris V8R2 is a special dart feature to help patternmakers add dimension to their garments with ease. Thanks to this new feature, modifying a dart requires half the usual time, resulting in a 50-90% increase in overall patternmaking speed.

Another highlight of this solution, and important nod to the globalized workforce of the fashion industry, is its ability to manage different units of measurement. With Modaris V8R2, Lectra has made it possible for patternmakers and external suppliers the guarantee of size compliance, regardless of the measurement systems used in the countries where production occurs.

Modaris V8R2 is already gaining traction among its pilot customers. Italian womenswear company GGZ was the first to endorse Modaris V8R2. “GGZ is a fast-fashion company and time and quality are of the essence for us. Modaris’s new dart feature helps us save up to 50% of pattern modification time. Additionally, 3D prototyping helps us ensure that pattern volumes and proportions correspond to our designers’ expectations early on, dramatically reducing our lead times,” attests Majla Gottardo, Patternmaker, GGZ.

“We are entering the information age, and we are catering to patternmakers who are dealing with consumers with different tastes, of all body shapes and sizes. Our patternmakers have hundreds of collections to deliver and no time to spare for errors. What we are aiming to do is making their everyday work environment easier for them, by providing the tools to streamline the development process and reduce the number of reworks to achieve the right fit the first-time,” states Céline Choussy, Chief Marketing & Communications Officer, Lectra. “All this is possible with Modaris V8R2.”

Recognized as a preferred partner for the global textile industry, PIAVE MAITEX brings on the successful path of responsible innovation and present, at Interfilière Paris, a unique line under the name of “AGAIN”.

PIAVE MAITEX, since the very beginning in 1908 up to the challenge of modern-day innovation, combined the tradition in the field of elastic fabrics which today represents the heritage ofthe italiantextile culture to innovation.

The last frontier of innovation in racing suits made with yarns in Metamicro is the model Prime SP-16+, designed in collaboration with the Team McLaren Honda F.1

The spinning mill Filidea, joint venture between Marchi & Fildi spa and Abalıoğlu Holding A.Ş specialized in technical and high performance yarns with natural and synthtic fibers, is parter of Sparco, italian Company leader for the production of automotive components and technical apparels for the most important world Championships. The cooperation between the two Companies located in Piedmont, northern Italy, is focused on the supply of yarns with Metamicro in an exclusive composition, that are used for the production of the racing suits Sparco of the Premium range for Formula 1 and the World Rally Championship. The fire resistant yarn Metamicro based on aramidic fibers are a product of the latest generation, for their production it is necessary a special spinning line. The production is following the strict Sparco standards. Sparco controls all the production chain of racing suits, from Filidea, who has the competence to dye all the yarns with aramidic fibers in its own dyeing plant, to the woven fabric, produced and dyed in its own plant, to the woven fabric made by the italian Company TAT, till the production of garments. The process is always improved and tested.

Metamicro yarns are made by an high peformance spinning process. They are used for the production of fire resistant fabrics, that make a protection barrier for the body against flames and high temperature. The very fine micronage allows the production of very light fabrics with thick texture, the perfect base for light and comfortable suits. These features assure easier movements to the driver and the maximum protection from fire, keeping high breathability.

Filidea has invested on its production capacity of corespun yarns with XLANCE® technology, fiber used for the production of longlasting workwear apparel with an excellent fitting.

The spinning mill Filidea, joint venture between Marchi & Fildi spa and Abalıoğlu Holding A.Ş specialize in technical and high performance yarns with natural and synthtic fibers, is increasing its production of blends with XLANCE®.

XLANCE® is the innovative elastolefin fibe, elastic, chlorine and UV resistant. It finds application on workwear and outdoor clothing, with natural and comfort fitting. The comfort stretch feature follows the the body’s natural movement during the day-to-day work. Workwear clothing are so light, resistant and with a contemporary look. Resistance to abrasion and to frequent industrial laundry cycles with chemical products meet the needs of several professional sectors. XLANCE® is produced by ©Xlance srl, Company located in Varallo Pombia (province of Novara – Piedmont – Italy) that found in Filidea the perfect partner for the development of specific yarns, that are getting more and more requested. An innovation that is getting more important thanks to the cooperation of the two textile Companies located in Piedmont. Filidea has been producing XLANCE® yarns since 2009 and has now a great know-how. The Company to strengthens its leadership in technical yarns, for the main applications on protetictive garments, workwear, sportswear, racing and automotive. Filidea has developed and consolidated several partnerships for the creation of complete supply chains and the collaboration with ©Xlance is a perfect example.