From the Sector

Reset
20 results
08.03.2024

Rieter: Partnership with Shanghai's DIW

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

Rieter and DIW signed a first order in the amount of around CHF 62 million for combers and draw frames that will provide the basis to transform DIW’s spinning mills into state-of-the-art industrial textile operations. DIW, a fast-growing company specializing in intelligent manufacturing and industrial operation services, selected Rieter following a competition in which the company’s machines achieved better stability and higher production than competitors. The strategic partnership of DIW and Rieter is designed to further enhance the overall operational efficiency of DIW’s mills by providing highly efficient machines, automation and digitization technology. This will also minimize conversion cost and consolidate the sustainable growth of both companies, while contributing to the high-quality development of the Chinese textile industry.

Source:

Rieter Management AG

10.01.2024

GROW: Trends and tradition at the INNATEX

Growth, digitalisation and re-commerce – the forthcoming INNATEX (the international trade fair for sustainable textiles) is devoted to highly topical themes. From 20 to 22 January 2024 at the Messecenter Hofheim Rhein-Main near Frankfurt, over 200 exhibitors will be meeting up with retailers, experts and journalists. The motto for the winter trade fair is GROW, representing the call for sustainable, social and commercial growth that will not be possible without the green fashion movement.

Optimistic expectations despite the challenges
According to Alexander Hitzel, INNATEX Project Manager, and the organisers, MUVEO GmbH, various new trends are opening up that might, if exploited strategically, unlock new business areas. These range from ‘quiet luxury’, travel, internationalism and focused storytelling to services for specific target groups. On the Monday, members of the expert panel will be discussing re-commerce with the Hessen Retail Federation in the Community Lounge.

Growth, digitalisation and re-commerce – the forthcoming INNATEX (the international trade fair for sustainable textiles) is devoted to highly topical themes. From 20 to 22 January 2024 at the Messecenter Hofheim Rhein-Main near Frankfurt, over 200 exhibitors will be meeting up with retailers, experts and journalists. The motto for the winter trade fair is GROW, representing the call for sustainable, social and commercial growth that will not be possible without the green fashion movement.

Optimistic expectations despite the challenges
According to Alexander Hitzel, INNATEX Project Manager, and the organisers, MUVEO GmbH, various new trends are opening up that might, if exploited strategically, unlock new business areas. These range from ‘quiet luxury’, travel, internationalism and focused storytelling to services for specific target groups. On the Monday, members of the expert panel will be discussing re-commerce with the Hessen Retail Federation in the Community Lounge.

From storytelling to digital tools – the INNATEX themes
“Second-hand is in fashion,” says Julia Frings of IFH Köln. “Sales of used and recycled products have been on an upward trend for some years now and with the rising importance of sustainability, their relevance will continue to grow. There is great potential in this area for the trade to reach new target groups and expand the range on offer. To be successful, though, it is essential to have a concept tailored to the needs of consumers.”

Alongside Julia Frings of IFH Köln, other Federation panellists will include Steffen Riegel of Hessnatur. The first Lounge Talk at the start of INNATEX will deal with Strategies for Sensible Growth, borrowing from the motto for the fair. This topic will be followed by Fair Wages in the Global South, Storytelling as a Strategy, and Digital Trends.

Brand portfolio and partners of INNATEX
The collaboration with the Hessen Retail Federation, like that with Fashion Changers and Greenstyle Munich, has already proved its worth at previous fairs, as a way of adding variety to a well balanced fair programme. The new collaborative partners include AMD Academy of Fashion and Design (AMD) in Wiesbaden, the Fashion Campus 2030 Initiative and the Enterprise Europe Network (EEN, a network promoting internationalisation among smaller and medium-sized businesses).

The brand portfolio includes fashion for all generations, tastes and occasions. Labels exhibiting for the first time include businesses such as Fuza Wool from Denmark with its high quality traditional knitwear, and the hemp-based accessories of 8000Kicks from Portugal. The DESIGN DISCOVERIES comprise Anfisa Roumelidi, C/OVER and Consci.

ITMA Asia + CITME Photo: Swissmem
01.11.2023

15 member companies of Swiss Textile Machinery Association at upcoming ITMA Asia + CITME

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

Market proximity
Swiss companies realized many years ago that geographical proximity is the key to success. Stäubli has started to set up offices in Chinese cities since 1998 and counts 12 locations today, to serve the whole country. In 2002, Itema established a centralized local branch which today has 160 employees in various functions. Loepfe has expanded its presence by creating an independent local business unit to overcome the 9,000 km distance by air, while Uster Technologies has had a Chinese subsidiary since 1982, with offices and service stations in different provinces. Luwa set up its offices and workshop in Shanghai in 1997. Rieter established a presence in mainland China in 2005, driven by a strong commitment to expanding the country’s know-how and expertise – and ten years later opened an advanced research center. All Swiss companies with serious business goals in China have made similar commitments to connect with customers and maintain strong relationships.

Understanding Chinese customers
Swiss companies also understand that Chinese customers require dedicated attention, and that speed is more essential than ever in delivering both machines and services.
Manufacturers in China are seeking cost-effective solutions to remain competitive, while consumers are looking for value in their purchases. Companies need to develop solutions that provide tangible economic benefits to their clients. Furthermore, energy savings have become paramount in China, due to the government's commitment to environmental sustainability and reduced carbon emissions. “Businesses are adopting more energy-efficient processes and technologies to meet stringent energy conservation and emission reduction targets,” says Peter Schnickmann, Managing Director at Luwa Air Engineering (Shanghai). He notes an investment trend for solutions helping Chinese companies cut operational costs and minimize their carbon footprint.

To enhance the reputation of both companies and products – and boost the image of the entire industry – the environmental impact needs to decrease. Priorities are saving water and waste, as well as reducing, replacing or completely eliminating the use of harmful substances. China has a strong demand for environmental-friendly solutions and sustainable technologies.

Customer-oriented in weaving
The huge number of Chinese fabric producers calls for an immense volume of weaving machinery to be supplied by international and local providers. Swiss machinery manufacturers hold an impressive share of this business.
Chinese weavers require advanced technology, with increasingly higher standards of efficiency. In weaving preparation, latest solutions match the speed, quality and reliability now wanted. Weaving machines too offer the eco-efficiency, performance, and ease of use needed, with innovations that extend the scope of sustainable weaving, and open-platform systems configurable to weavers’ specific operations. A huge increase in demand for technical textiles in recent years has been driven by applications such as carbon fiber, aramid and glass fiber.

Profitable in spinning
China’s competitive advantages come from its large-scale and integrated manufacturing capabilities, along with the use of advanced automation and digitization technologies. Spinners aim to capitalize on extended market opportunities, with more economical production. The latest air-jet spinning machines serve these goals, allowing exceptionally low production costs per kilogram of yarn, coupled with high flexibility and reliability. Sustainable yarns are in great demand.

The automation trend in spinning mills focuses on connecting production processes. Data is used to ensure the highest quality standards, most efficient raw material usage, reduction of waste, and energy savings. To make spinning mills more competitive, latest solutions combine cutting-edge hardware, data-enabled software and renowned textile expertise.

More information:
ITMA Asia + CITME Swissmem
Source:

Swissmem

First show of ‘Best of Bangladesh’ in Europe (c) Bangladesh Apparel Exchange
24.07.2023

First show of ‘Best of Bangladesh’ in Europe

‘Best of Bangladesh’ -- the first ever sole ‘Made in Bangladesh’ show in Europe -- aims to open the doors for Europe to experience what the Bangladeshi industries has to offer.

As Bangladesh celebrates five decades of strong ties with Europe, in order to further strengthen the ties and deepen collaborations with the partners across Europe, Bangladesh Apparel Exchange, supported by the Bangladesh Embassy in the Netherlands, is organizing the event in Amsterdam, Netherlands on September 4th and 5th, 2023.

The ‘Best of Bangladesh’ aims to serve as a dynamic platform to showcase the progress and potential across diverse sectors of Bangladesh economy, especially manufacturing.

A total of 40 Bangladeshi companies each of which is the country’s best from apparel, textile, leather, Agro, jute, handicrafts, pharmaceutical, light engineering, digital industry, FMCG and bicycle will showcase their sustainable and innovative products in the Best of Bangladesh.  

‘Best of Bangladesh’ -- the first ever sole ‘Made in Bangladesh’ show in Europe -- aims to open the doors for Europe to experience what the Bangladeshi industries has to offer.

As Bangladesh celebrates five decades of strong ties with Europe, in order to further strengthen the ties and deepen collaborations with the partners across Europe, Bangladesh Apparel Exchange, supported by the Bangladesh Embassy in the Netherlands, is organizing the event in Amsterdam, Netherlands on September 4th and 5th, 2023.

The ‘Best of Bangladesh’ aims to serve as a dynamic platform to showcase the progress and potential across diverse sectors of Bangladesh economy, especially manufacturing.

A total of 40 Bangladeshi companies each of which is the country’s best from apparel, textile, leather, Agro, jute, handicrafts, pharmaceutical, light engineering, digital industry, FMCG and bicycle will showcase their sustainable and innovative products in the Best of Bangladesh.  

Bangladesh economy ranks as the world’s 37th largest now and it’s rapidly-expanding. The ‘Best of Bangladesh’ is being organized to accelerate interests and burgeoning engagements between the entrepreneurs and private sector entities on both European and Bangladeshi sides. The event has been structured to serve as a platform to showcase the multifaceted progress made and potential across diverse sectors of Bangladesh’s economy.

There will be an inaugural and 7 interactive panel sessions at the Best of Bangladesh on the topics ‘Bangladesh – Perspectives From An Emerging Economy’, ‘Bangladesh - Your Sustainable Sourcing Destination’, ‘Empowering the Future: Advancing Safety & Well-being for Garments Workforce in Bangladesh’, ‘Bangladesh Agro-Food: A Next Opportunity for Collaboration’, ‘Impact Investing - The Next Frontier’, ‘Sustainable Synergy: Circular Economy, Climate Action & Bangladesh’s Future’, and ‘Digitization and Digital Economy in Bangladesh’.

Source:

Bangladesh Apparel Exchange

(c) Digital Capability Center
15.03.2023

ITA Supports SMEs in Digitisation and Sustainability

The Institut für Textiltechnik (ITA) of RWTH Aachen University, as part of the Mittelstandzentrum 4.0 Kompetenzzentrum Textil vernetzt, has supported numerous small and medium-sized enterprises (SMEs) on their way to digitalisation over the last five years. At the Digital Capability Center (DCC) in Aachen, for example, SMEs were able to experience digitised production from yarn to smart bracelets and thus test the feasibility of Industry 4.0 solutions in their working environment.

New supply chain laws and social sustainability now pose current challenges for SMEs. In the follow-up project Mittelstand-Digital Zentrum Smarte Kreisläufe (SME Digital Centre Smart Cycles), ITA will be supporting SMEs from 1 March in implementing ideas for digitalisation and sustainability in concrete terms.

The Institut für Textiltechnik (ITA) of RWTH Aachen University, as part of the Mittelstandzentrum 4.0 Kompetenzzentrum Textil vernetzt, has supported numerous small and medium-sized enterprises (SMEs) on their way to digitalisation over the last five years. At the Digital Capability Center (DCC) in Aachen, for example, SMEs were able to experience digitised production from yarn to smart bracelets and thus test the feasibility of Industry 4.0 solutions in their working environment.

New supply chain laws and social sustainability now pose current challenges for SMEs. In the follow-up project Mittelstand-Digital Zentrum Smarte Kreisläufe (SME Digital Centre Smart Cycles), ITA will be supporting SMEs from 1 March in implementing ideas for digitalisation and sustainability in concrete terms.

This means finding sustainable solutions and processes for the circular economy together with companies and developing new digital business models. The ITA's solutions cover the areas of awareness-raising, qualification, implementation and networking. These offers are free of charge for SMEs - follow-up projects often lead to the funding programme "Central Innovation Programme for SMEs - ZIM" of the Federal Ministry of Economics and Climate Protection (BMWK) or to research and development projects.

Questions concerning the funding conditions can be sent to the following e-mail address: rosario.othen@ita.rwth-aachen.de.

Source:

Institut für Textiltechnik der RWTH Aachen University

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Graphic: Premium Group
14.03.2022

Premium Group: Details of the new Event Cosmos in Berlin

For the summer events at the Berlin exhibition center, the Premium Group is relying on a new mix of fashion, business, content and entertainment.

The State of Style & Culture
The Premium Group is expanding its portfolio in the summer to include the consumer festival THE GROUND in addition to the existing PREMIUM and SEEK trade fairs and is presenting numerous innovations for the long-awaited reunion of the industry in Berlin.

The new location Messe Berlin will become the Premium Group cosmos, a holistic inspirational hub for all relevant topics related to fashion, trends, retail, lifestyle, marketing, digitization, sustainability, metaverse and more.

In July, brands and partners can also present themselves to end consumers for the first time as part of the new event THE GROUND, 'Direct to Consumer'. Consumers get access to THE GROUND, while trade visitors are invited to view the full range and be inspired throughout the site.

For the summer events at the Berlin exhibition center, the Premium Group is relying on a new mix of fashion, business, content and entertainment.

The State of Style & Culture
The Premium Group is expanding its portfolio in the summer to include the consumer festival THE GROUND in addition to the existing PREMIUM and SEEK trade fairs and is presenting numerous innovations for the long-awaited reunion of the industry in Berlin.

The new location Messe Berlin will become the Premium Group cosmos, a holistic inspirational hub for all relevant topics related to fashion, trends, retail, lifestyle, marketing, digitization, sustainability, metaverse and more.

In July, brands and partners can also present themselves to end consumers for the first time as part of the new event THE GROUND, 'Direct to Consumer'. Consumers get access to THE GROUND, while trade visitors are invited to view the full range and be inspired throughout the site.

PREMIUM: New tripartition with new segments
In order to be able to show all relevant segments of advanced contemporary fashion even better and more holistically, the PREMIUM portfolio will be divided into three new areas from the summer. With the segmentation into High, Icon & Volume, large, commercially successful brands as well as more focused designer brands, newcomers and smaller innovators will now find their place. Here the PREMIUM fashion team advises all partners in detail in order to guarantee ideal positioning and the possibility of storytelling.

SEEK: Premiere of the SEEK Conscious Club
Sustainability has been part of the culture of the SEEK brand since it was founded 12 years ago. With the new SEEK Conscious Club, in addition to the SEEK area with well-known and new SEEKERS, a dedicated area for sustainable brands is being created. SEEK offers them the stage and space to grow and the attention to optimally spread brand values. The international SEEK community is represented by niche brands as well as commercially successful players. And the established TRADE UNION for brands with a particularly sharp sales strategy will once again have an exclusive area in the new location.

THE GROUND: Festival for Style & Culture
With the new Direct to Consumer Festival THE GROUND, the Premium Group is now also inviting Gen-Z, Gen-Y and Culture Pioneers once a year. Music acts, panels and live talks with well-known speakers and influencers, creative workshops, sports and wellbeing sessions are intended to inspire, enrich, enlighten and inspire exchange: entertainment, edutainment and experiences.

THE GROUND turns live streams into live encounters, consumers into co-creators and classic retailers into strategic marketing and event partners. Here, through emotional experiences and unique showcases, brands can be experienced and interested customers become loyal brand fans. Topics relevant to society and generations, such as fashion, sports, beauty & well-being, metaverse & gaming, will be featured in the area as well as in talks and master classes as part of the FASHIONTECH content format.

"In order to remain sustainable, we want and need to merge B2B and D2C and create a place - a marketplace for ideas and products - where brands, retailers and consumers come together and learn from each other. For the first time, we are offering holistic reach, synergy and network effects,” explains Jörg Arntz, Managing Director Premium Group.

“B2B and D2C will take place in parallel on one site, although of course there will still be an area for professionals only, i.e. exclusively for the industry. The D2C area is accessible to both end consumers and trade visitors. In addition to our trade fairs, we create new content from which our visitors and exhibitors benefit.”

During the event, which will take place from Thursday to Saturday for the first time, it will be about exchange, trends, inspiration and emotion, new brands, the further development of well-known players, creative collection presentations and of course what the fashion world and its protagonists * inside: joy and passion. In order for this to work and for the long-term existence of the new event concept in Berlin to be guaranteed, everyone involved is asked, challenged and responsible.
 
Selected brand highlights:
American Vintage // Aigner // At.p.Co  // Ben Sherman // Blue de Geñes // Buffalo // Camper // C.O.F. Studio // Copenhagen Studios // Coster Copenhagen // Crep Protect // Denham // Dstrezzed // Drykorn // Ecoalf 1.0 //  Edwin // Ellesse // Fabienne Chapot //  Fleurs de Bagne // Floris Van Bommel // Gant //  Happy Socks // Helene Galwas // Herrlicher // Hiltl //  Horizn Studios // Ilse Jacobsen // Izipizi Paris // Kangaroos // Kennel & Schmenger Schuhmanufaktur // Keen // K-Swiss // Lee // Merz b. Schwanen // Moss Copenhagen // Nautica  // Novesta // Nudie Jeans //  O My Bag // Pantofola D’Oro 1886  // People of Shibuya // Palladium // Pendleton Woolen Mills // Puma // Property Of //  Reyn Spooner // Sandqvist // Saucony // Studio Seidensticker // Stutterheim // Sofie Schnoor // Steve Madden // Thinking Mu // Ucon Acrobatics //  Uniform Bridge // Veja // Womsh // Wool & Co // Wrangler// Yaya // Zespá

Source:

Premium Group

Rieter CAMPUS – Foundation Stone Laid (c) Rieter
Rieter Campus Winterthur
09.09.2021

Rieter CAMPUS – Foundation Stone Laid

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

With a floor area of over 30 000 m2, the Rieter CAMPUS offers space for around   700 ultra-modern workplaces. For this purpose, Rieter and a specialist in office architecture have developed a contemporary space concept for the “Open Space Office” that is tailored to the needs of the company, divided into meeting rooms, focus rooms and some individual offices. The underground car park provides   88 parking spaces, and a further 12 outdoor parking spaces are being created   in front of the technology center.  “In the course of its 225-year company history, Rieter has helped shape the city of Winterthur. The foundation for the future as a leading technology company is now being created with the new CAMPUS. In this way, Rieter is giving a clear indication   of its commitment to the Winterthur site and to Switzerland as a business location”, commented Bernhard Jucker, Chairman of the Board of Directors of Rieter Holding AG.

Innovation is an important part of Rieter’s strategy and crucial for the company’s success. For this reason, Rieter invests more than CHF 50 million annually in research and development. Thanks to this commitment, Rieter is making a   decisive contribution to the further development of systems for sustainable yarn production and their digitization. The Rieter CAMPUS will provide an attractive working environment that promotes creativity and innovation.  The new CAMPUS is a showcase project in terms of economic feasibility, energy efficiency and sustainability. Rieter relies on renewable energy for construction. This includes heat generation via geothermal probes and a photovoltaic system on around 1 300 m2 of roof area. “In this way, the entrepreneurial focus on sustainable and energy-efficient solutions for yarn production is reflected in the overall concept of the CAMPUS,” emphasized Rieter CEO Norbert Klapper.  The move into the new building is planned for 2024.

Source:

Rieter Management AG

Kitlocker Implements Kornit Avalanche Poly Pro for Efficient, Versatile Sportswear Production on Demand (c) Kitlocker
Mike Kent
24.03.2021

Kitlocker Implements Kornit Avalanche Poly Pro for Efficient, Versatile Sportswear Production on Demand

The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced United Kingdom-based Kitlocker has implemented two Kornit Avalanche Poly Pro systems for efficient, retail-quality production of branded and customized apparel on demand.

The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced United Kingdom-based Kitlocker has implemented two Kornit Avalanche Poly Pro systems for efficient, retail-quality production of branded and customized apparel on demand.

Kitlocker operates within several sectors of the sports and leisurewear market, providing team gear for schools, football clubs, and other sporting organizations, managing e-commerce platforms on behalf of those organizations. Enabling their customers to embellish popular styles on demand, in any quantity, drove them to explore available technologies for speed and versatility, particularly regarding polyester apparel, a cornerstone of sportswear. Kornit’s Poly Pro system is the only single-step digital direct-to-garment (DTG) technology developed specifically for imprinting polyester and poly-blend materials, extending the company’s patented process for waste-free production with durability, precise graphic detail, and the broadest colour gamut to popular sports and athleisure apparel.

“The Kornit Avalanche Poly Pro allows for far superior quality of finish for embellishment compared to traditional print techniques,” says Mike Kent, Co-Owner of Kitlocker. “When we were shopping around for alternatives, it was obvious the sort of single pass, and its ability to print on polyester, was certainly market-leading—there was no alternative that could do that. The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

According to Kent, the technology has enabled Kitlocker to approach new markets that had always been off-limits previously, driving incremental business and building out new product ranges. The process lent itself to simple integration with their workflow and online design tools, empowering customers to visualize their own pieces and receive finished gear, with superior retail quality and precise logo colour matching, in mere days.

“The system allows us bigger print areas, more colours, and more elaborate designs, and our customers to uniquely embellish their garments on a wide range of products from different brands with lots of different kinds of creative outputs,” adds Kent.

“Our systems help brands like Kitlocker sync supply with demand, eliminating waste and making them more reactive to customer needs,” says Chris Govier, KDEU Managing Director. “Kornit Avalanche Poly Pro extends the efficiency, sustainability, quality, and logistical benefits of digitization to the booming sports and athleisure apparel market. Being able to give their customers the widest assortment of gear, customized in any quantity, on demand, is a winning game plan for Kitlocker.”

Source:

pr4u press contact

SGL Carbon: fiscal year 2019 (c) SGL Carbon
SGL Carbon: fiscal year 2019
12.03.2020

SGL Carbon: fiscal year 2019

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

  • Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
  • Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
  • Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
  • Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
  • Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
  • Free cash flow significantly improved
  • Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
  • SGL Carbon confirms guidance for fiscal

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

  • Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
  • Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
  • Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
  • Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
  • Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
  • Free cash flow significantly improved
  • Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
  • SGL Carbon confirms guidance for fiscal year 2020: sales expected slightly below previous year; recurring EBIT approximately 10 to 15 percent below previous year level
  • Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: “The financial development of the fiscal year 2019 conceals the fact that our strategic orientation is correct. This is evident from our growth and the increasing number of contracts and projects we acquired in our strategic core markets. Main drivers are the topics of sustainable mobility and energy as well as digitization. Therefore, we expect that we can grow our consolidated revenue by a mid to high single-digit percentage per year on average between 2020 and 2024.“

The fiscal year 2019 developed very differently in the two business units of SGL Carbon. The record results in the graphite specialities business could not fully compensate for the weak development in the market segments Wind Energy, Textile Fibers and Industrial Applications in the carbon fiber business. Group sales grew by 4 percent to 1.1 billion euros. Recurring Group EBIT declined by 25 percent to 48 million euros. Due to the ongoing weakness in the market segments Textile Fibers and Industrial Applications the business unit CFM recorded a non-cash impairment loss of 75 million euros in the third quarter of 2019. With minus 90 (prior year: plus 41) million euros, consolidated Group result declined significantly compared to last year’s good results. The Group confirms its guidance for 2020 published in October 2019.

Group sales are expected to decline slightly compared to the prior-year level, whereas Group recurring EBIT is expected to reach a result around 10 to 15 percent below the prior-year level. Consolidated net result of the Group in 2020 should strongly improve compared to prior-year level to a low double-digit loss.

More information:
SGL Carbon
Source:

SGL Carbon

05.11.2019

SGL Carbon increases group sales; recurring EBIT on the level of the prior year

  • Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
  • Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
  • Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
  • Free cash flow from continuing operations improved significantly in the first nine months
  • Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
  • Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
  • Countermeasures initiated to i
  • Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
  • Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
  • Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
  • Free cash flow from continuing operations improved significantly in the first nine months
  • Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
  • Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
  • Countermeasures initiated to improve earnings of CFM
  • Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: ”The structural growth drivers remain intact in our strategically relevant markets. The countermeasures to improve earnings of CFM will be implemented consistently.”

In the third quarter 2019, the business units of SGL Carbon developed very differently. While Graphite Materials & Systems (GMS) showed better than expected results, Composites – Fibers & Materials (CFM) deteriorated compared to the two previous quarters. This is attributable to the weaker development in the market segments Textile Fibers and Industrial Applications. In total, sales revenue in the first nine months 2019 grew by approximately 6 percent to reach 832 million euros. Recurring Group EBIT after nine months reached approximately 54 million euros. Adjusted for a positive one-time effect in the prior year, this was comparable to the prior year level.

In its ad-hoc notification of October 25, 2019, the company revised its guidance for recurring EBIT of CFM downwards to a negative mid to high single digit million euro amount. On the Group level the company now expects a recurring EBIT at 45 to 50 million euros. Due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications in the business unit CFM a non-cash impairment charge in the amount of approximately 75 million euros was recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler were not affected by this impairment. In addition, the impairment charge of CFM led to a valuation allowance on deferred tax assets in the amount of 7.4 million euros. Against this background, SGL Carbon now expects a net result of approximately minus 100 million euros for fiscal year 2019.

More information:
SGL Carbon
Source:

SGL Carbon

05.11.2019

Lenzing received several prizes at the Corona awards

Lenzing was awarded for the introduction of the blockchain technology for fiber identification as well as its achievements as a leading company and significant economic engine in the region

On November 4, 2019, Lenzing AG won the “Digital Corona” in Gold. The coveted business prize was awarded for the first time in this category. It is awarded to companies that have dynamically advanced the digitization of business processes, products, services and business models in recent years. At the premiere, Lenzing was delighted to receive the first prize for the introduction of the blockchain technology for fiber identification along the textile value chain.

Lenzing was awarded for the introduction of the blockchain technology for fiber identification as well as its achievements as a leading company and significant economic engine in the region

On November 4, 2019, Lenzing AG won the “Digital Corona” in Gold. The coveted business prize was awarded for the first time in this category. It is awarded to companies that have dynamically advanced the digitization of business processes, products, services and business models in recent years. At the premiere, Lenzing was delighted to receive the first prize for the introduction of the blockchain technology for fiber identification along the textile value chain.

“Consumers increasingly want to understand the ingredients and suppliers of the products they buy, requesting a new level of transparency and traceability. With the introduction of blockchain technology, Lenzing is pursuing the ambitious goal of creating full transparency across the value chain, driving change in an industry where less than five percent of the top 250 apparel brands can track their garments back to the fiber origin”, Stefan Doboczky, CEO of the Lenzing Group, says. Lenzing enables its customers and partners to identify TENCEL ™ branded fibers across each production and distribution step from fiber-to-retail. The technology also allows consumers to verify the garment composition and the underlying textile supply chain at the point of sale, simply by scanning the barcode with a mobile device. As a result, Lenzing also directly supports the business with its very sustainably produced TENCEL™ lyocell fibers.

More information:
Lenzing AG
Source:

Lenzing AG

Internationale Textilmesse Apparel Textile Sourcing Germany (ATSG) feiert erfolgreiche Premiere © JPC
Überblick Ausstellungshalle im Estrel Berlin 2019
24.09.2019

International textile trade fair Apparel Textile Sourcing Germany (ATSG) celebrates successful premiere

Berlin - 200 exhibitors, around 1,000 visitors and over 20 speakers from Germany and abroad – the ATSG textile fair premiered in Berlin from 11 to 13 September 2019 brought together exhibitors, speakers and trade visitors from all over the world. Jason Prescott, CEO of JP Communications, said he was satisfied with the event at the Estrel Conference Center: "The first step has been taken, now we will establish the ATSG as an important event of the Berlin fashion and textile world".

Berlin - 200 exhibitors, around 1,000 visitors and over 20 speakers from Germany and abroad – the ATSG textile fair premiered in Berlin from 11 to 13 September 2019 brought together exhibitors, speakers and trade visitors from all over the world. Jason Prescott, CEO of JP Communications, said he was satisfied with the event at the Estrel Conference Center: "The first step has been taken, now we will establish the ATSG as an important event of the Berlin fashion and textile world".

The ATSG was the first fair of its kind in Germany. "There are many fashion trade fairs for sale from wholesale to retail. Berlin has so far lacked an event for companies of all sizes, including micro-brands and small fashion labels," continues Jason Prescott. The exhibited product categories included fabrics, technical clothing, mixed and knitted fabrics, home textiles, leather, natural and synthetic fibres, readymade goods and fashion accessories. Visitors to major European fashion brands as well as small, independent brands from the Berlin fashion scene were able to take a close look at raw materials and finished garments and discuss their ideas personally with the exhibitors. In parallel, China Textile Brand Show (Berlin), sponsored by Chinese Ministry of Commerce (MOFCOM), made its debut bringing in more than 150 superb Chinese manufacturers with their best collections for Germany and EU market.

Opening Ceremony, Lectures and Fashion Show

The ATSG was opened by Chinese government representatives and international association delegates. More than 20 lectures on the three days provided the latest impulses for thought and discussion. In their lectures and panel discussions, speakers from all over the world presented current positions on topics such as "All China? Or is there more to it?", "Application examples of artificial intelligence in the fashion industry", "Optimal logistics concepts for Europe", or "The importance of sustainability in the European fashion industry".

Wilson Zhu, COO at Li & Fung, one of the world's largest trading houses based in Hong Kong, explained in his keynote speech his view on the digitization of global supply chains: "From raw materials in the textile factory to consumer tracking: In retail, every step of the value chain is determined by digitization.

Companies need to be close to consumers and their supply chains must enable a seamless flow of data and information from start to finish". Customers and their requirements have also changed: "They want to know about origin, recyclability and production standards and use their information to adjust their purchasing behavior accordingly.” Other speakers included Jeff Streader of the brand investment platform Go Global and Salman Khokhar of Brand Lab Kollective Moda. The fashion show on the second day featured creations by local Berlin labels (Damur, Danny Reinke, Aline Celi, Yoona Tech) as well as Asian brands exhibiting at ATSG.

Successful kick-off

Exhibition organiser Jason Prescott draws a positive balance: "Looking back on the three days, I am very proud of what went well. Which has been confirmed for us: We're on an exciting path, have taken our first steps here in Berlin and will continue to develop the exhibition." The creators of ATSG 2019 are taking ideas for the year 2020 with them, especially from the many intensive discussions with exhibitors and visitors: "The ATSG has offered visitors and exhibitors a unique opportunity to identify new growth strategies, look around for market partners, learn from each other and establish networks. We are very pleased that the concept was used here in Berlin," concludes Chase Vance, Director of JP Communications.

Oerlikon feiert vier Weltpremieren zur ITMA Barcelona 2019 (c) Oerlikon
Oerlikon Shuttle ITMA 2019
08.05.2019

Oerlikon celebrates four world premieres at ITMA Barcelona 2019

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.

More information:
ITMA Oerlikon Fibers Automation
Source:

Oerlikon

30.04.2019

Lectra’s Annual Event, ‘Winning Over the New Fashion Consumer’ Demonstrates the Power of Data in Fashion

Companies get a close-up of new consumer buying journey and explore how they can meet challenges with Lectra’s latest technologies and industry experts

Lectra cements its position as a fashion industry opinion maker by leading a much-awaited discussion on new consumer behavior at its latest fashion event, ‘Winning Over the New Fashion Consumer’ in Bordeaux-Cestas, France.

More than 75 industry insiders and market experts from 14 countries convened at Lectra’s International Advanced Technology and Conference Center (IATC) for two days to examine how the digital age is bringing about major shifts in consumer behavior. Today’s digitally attuned consumers have become co-creators in the production process, changing the fashion landscape entirely.

Companies get a close-up of new consumer buying journey and explore how they can meet challenges with Lectra’s latest technologies and industry experts

Lectra cements its position as a fashion industry opinion maker by leading a much-awaited discussion on new consumer behavior at its latest fashion event, ‘Winning Over the New Fashion Consumer’ in Bordeaux-Cestas, France.

More than 75 industry insiders and market experts from 14 countries convened at Lectra’s International Advanced Technology and Conference Center (IATC) for two days to examine how the digital age is bringing about major shifts in consumer behavior. Today’s digitally attuned consumers have become co-creators in the production process, changing the fashion landscape entirely.

The keynotes, live demonstrations, and customer testimonials highlighted the importance of process digitization and data analysis for meeting new consumer needs. The event kicked off with two keynote speakers. Peter Jeavons, Managing Director of First Insight Europe, stressed the importance of using data to understand the hyperconnected fashion consumer. Craig Crawford, Strategist and Founder of CrawfordIT, outlined the arising challenges and opportunities from these changes, and urged fashion companies to embrace digital transformation internally by cultivating a conducive environment for it.

Beyond just understanding the new fashion consumer, the event stressed on the importance of leveraging data to deliver customer-centric services and products. Lectra presented their responses to this challenge in the form of two new major solutions, Kubix Link and Fashion on Demand by Lectra.

More information:
Lectra, PLM
Source:

lectra

04.04.2019

TINTEX awarded ‘IAPMEI’ innovation accolade for 2019

TINTEX is this year recipient of the unique and prestigious annual recognition from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protagonists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry .
“We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

TINTEX is this year recipient of the unique and prestigious annual recognition from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protagonists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry .
“We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

In a fast moving globalized market, all companies must be able to adapt quickly and using innovation, creativity, and responsibility can help deliver successes. And here TINTEX can network between Technological Centers, Universities, and Knowledge Centers, as a strategic business and holistic imperative. And so sharing the Naturally Advanced strategy of TINTEX as a driver for change, IAPMEI recognizes this TINTEX OPEN DAY as a demonstration of practical market potential, and has partnered with CENTI  (Centre for Nanotechnology and Smart Materials the Institute for New Technologies) and CITEVE (an institution of national and international reference for the promotion of Innovation and Technological Development) as a way to guarantee this success.
 
Being able to drive material innovation, and to promote a new generation of sustainable values to contemporary fashion, active, sports and lingerie markets through responsible supply chains can be transformative for our future fashion systems, and TINTEX is proud to be selected as part of the Make Fashion Circular initiative by the Ellen MacArthur Foundation, helping  to better activate these changes across the fashion industry for all to enjoy.

More information:
Tintex, campaign, Fashion
Source:

GB Network Marketing & Communication

26.03.2019

TINTEX awarded prestigious ‘IAPMEI’ innovation accolade for 2019

TINTEX is this year sole recipient of the unique and prestigious annual award from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protaganists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry . “We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

TINTEX is this year sole recipient of the unique and prestigious annual award from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protaganists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry . “We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

In a fast moving globalized market, all companies must be able to adapt quickly and using innovation, creativity, and responsibility can help deliver successes. And here TINTEX can network between Technological Centers, Universities, and Knowledge Centers, as a strategic business and holistic imperative. And so sharing the Naturally Advanced strategy of TINTEX as a driver for change, IAPMEI recognizes this TINTEX OPEN DAY as a demonstration of practical market potential, and has partnered with CENTI  (Centre for Nanotechnology and Smart Materials the Institute for New Technologies) and CITEVE (an institution of national and international reference for the promotion of Innovation and Technological Development) as a way to guarantee this success.
 
Being able to drive material innovation, and to promote a new generation of sustainable values to contemporary fashion, active, sports and lingerie markets through responsible supply chains can be transformative for our future fashion systems, and TINTEX is proud to be selected as part of the Make Fashion Circular initiative by the Ellen MacArthur Foundation, helping  to better activate these changes across the fashion industry for all to enjoy.

More information:
TINTEX circular economy
Source:

GB Network Marketing & Communication

The Mayer & Cie. management trio: Benjamin Mayer, Sebastian Mayer and Marcus Mayer (from l. to r.) (c) Mayer & Cie. The Mayer & Cie. management trio: Benjamin Mayer, Sebastian Mayer and Marcus Mayer (from l. to r.)
22.03.2019

Mayer & Cie. at ITMA: Focus on sport and new customer experiences

Albstadt-based circular knitting machine manufacturer Mayer & Cie. (MCT) is exhibiting at this year’s leading textile and garment technology trade fair ITMA with the slogan “Stay a winner. With Mayer & Cie.” The focus of the company’s presentation will be on sport. Sportswear, active leisurewear and sports shoes are increasingly made of circular knitted fabrics and the long-established German firm has the right machines to cater for this trend. Mayer & Cie. is also going for the improved customer experiences that consistent digitization makes possible.

For years global demand for circular knitted goods has increased continuously. An important growth driver is the sportswear and sports fashion sector, including sports shoes. According to Euromonitor the market segment grew by about seven per cent per year between 2013 and 2017. By 2017 Euromonitor estimated its total market value to be around USD 78 billion. Lightweight synthetic fibres, new patterns and attractive functionalities are the key requirements in this area.

Albstadt-based circular knitting machine manufacturer Mayer & Cie. (MCT) is exhibiting at this year’s leading textile and garment technology trade fair ITMA with the slogan “Stay a winner. With Mayer & Cie.” The focus of the company’s presentation will be on sport. Sportswear, active leisurewear and sports shoes are increasingly made of circular knitted fabrics and the long-established German firm has the right machines to cater for this trend. Mayer & Cie. is also going for the improved customer experiences that consistent digitization makes possible.

For years global demand for circular knitted goods has increased continuously. An important growth driver is the sportswear and sports fashion sector, including sports shoes. According to Euromonitor the market segment grew by about seven per cent per year between 2013 and 2017. By 2017 Euromonitor estimated its total market value to be around USD 78 billion. Lightweight synthetic fibres, new patterns and attractive functionalities are the key requirements in this area.

Mayer & Cie. can already fulfil many requirements with a portfolio of machines considered to be the largest in the industry. Lightweight mesh structures, often requested for running shirts, are a speciality of the IG 3.2 QCe interlock machine, for example. Jacquard machines from the OVJA family, in contrast, are suitable for the manufacture of shoe uppers. Compared with the conventional methods flat knitting and warp knitting, circular knitting scores points for productivity and significantly shorter set-up times.

Series production of the Spinit 3.0 E spinning and knitting machine has been under way since the end of 2018. It combines two previously separate processes – spinning and knitting – in one machine. That saves time, space and energy compared with conventional manufacturing processes. Mayer & Cie. has already won several awards for this approach, the latest being the Innovation Prize for the Climate and the Environment (IKU) that the Federal Environment Ministry and the Confederation of German Industry (BDI) award every other year. The company is presenting at ITMA its further developments of this machine.

Along with machine development Mayer & Cie. has set itself another target for ITMA and thereafter: to improve the customer experience, a task of which Sebastian Mayer is in charge. His responsibilities at Mayer & Cie. are for corporate development and digitization. Digitization of the company’s extensive customer and machinery know-how is currently under way. Customers will be able to see and test the initial results at ITMA. Available for testing will be the new Web shop, linked with an analogue model of the high-bay warehouse in Albstadt-Tailfingen, and machine maintenance by means of HoloLens.

More information:
Mayer & Cie
Source:

Mayer & Cie. GmbH & Co. KG

Oerlikon: AC-Automation Acquisition (c) Oerlikon
Georg Stausberg, CEO of Oerlikon Manmade Fibers Segment, Rolf Gänz, Managing Director of AC-Automation, and Ralf Schilken, CFO of Oerlikon Manmade Fibers Segment (from left, first row).
13.04.2018

Oerlikon: AC-Automation Acquisition

  • Oerlikon integrates automation solutions for largescale plants in technology portfolio

Remscheid, Germany / Pfäffikon, Schwyz, Switzerland - Oerlikon announced today that it has acquired Germany-based AC-Automation GmbH & Co. KG, an engineering company specializing in large-scale plant automation solutions for the textile and packaging industries. The two companies have been partnering since the early 1980s. The integration of AC-Automation in Oerlikon expands the market-leading technology portfolio of its Manmade Fibers Segment. It also marks a milestone in Oerlikon’s ongoing quest to offer innovative, fully automated and digitally networked Industry solutions in the manmade fiber industry.

  • Oerlikon integrates automation solutions for largescale plants in technology portfolio

Remscheid, Germany / Pfäffikon, Schwyz, Switzerland - Oerlikon announced today that it has acquired Germany-based AC-Automation GmbH & Co. KG, an engineering company specializing in large-scale plant automation solutions for the textile and packaging industries. The two companies have been partnering since the early 1980s. The integration of AC-Automation in Oerlikon expands the market-leading technology portfolio of its Manmade Fibers Segment. It also marks a milestone in Oerlikon’s ongoing quest to offer innovative, fully automated and digitally networked Industry solutions in the manmade fiber industry.

The 60 employees at AC-Automation’s Bernkastel-Kues and Augsburg locations will become part of Oerlikon’s Manmade Fibers Segment, which includes the leading brands Oerlikon Barmag and Oerlikon Neumag. The move will expand the Segment’s business model, adding another key core component to its current offering of production plants and technology solutions from melt to yarn, fibers, andnonwovens. Ultimately, Oerlikon will be able to offer customers a total solution from a single source, including automation logistics for packaging, high-bay storage, and other areas, which complement its current market-leading spinning and process technologies for the textile industry.

"We see our expanded overall offering as an Industry solution, reflecting the future of an even more efficient, digitized and profitable chemical fiber industry, especially for large-scale plants with daily production capacity of several hundred tons of polyester, nylon, polypropylene, or other manmade fibers,” explains Georg Stausberg, CEO of the Manmade Fibers Segment. Manmade fiber producers from China — the world’s most important market, generating more than 70 % of worldwide manmade fiber production — as well as companies from other fast-growing markets such as India, Turkey and the USA are also relying on automated and networked Industry total solutions.

"The acquisition and integration of AC-Automation’s automation solutions will provide new opportunities for our manmade fiber business. It enables the Segment to increasingly position itself as an Industry solution provider in combination with our own digitization solutions,” says Oerlikon Group CEO Dr. Roland Fischer. “As a leading provider of advanced materials, surface solutions and materials processing including the engineering and production of polymer plants, this acquisition marks another milestone in Oerlikon’s strategy to strengthen its businesses and thus sustain profitable growth.”

"After such a long partnership, we are excited to be able to benefit even more in the future as part of a global player in the textile industry. Our market access will further improve with the help of the Oerlikon
Group's sales and service network. For my employees, I am very pleased to be able to bring them into an international Group, in which there would be new opportunities and perspectives for them personally,”
said Rolf Gänz, AC-Automation’s Managing Director.

More information:
Oerlikon Automation
Source:

Oerlikon - Corporate Communications
and Public Affairs (Segment Manmade Fibers)

Jinfa Labi chooses Lectra Fashion PLM 4.0 © Lectra
Jinfa Labi chooses Lectra Fashion PLM 4.0
07.11.2017

Jinfa Labi chooses Lectra Fashion PLM 4.0

  • Lectra’s latest PLM solution selected by Jinfa Labi to improve its product development process through supply chain digitization

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce that Jinfa Labi, one of the first publicly listed maternity and infant clothing companies in China, has chosen Lectra Fashion PLM 4.0 to help digitally transform their supply chain, making it more efficient, integrated and connected.

  • Lectra’s latest PLM solution selected by Jinfa Labi to improve its product development process through supply chain digitization

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce that Jinfa Labi, one of the first publicly listed maternity and infant clothing companies in China, has chosen Lectra Fashion PLM 4.0 to help digitally transform their supply chain, making it more efficient, integrated and connected.

Spurred by the continued growth of the Chinese economy, young Chinese parents are now demanding maternity and baby products that are more personalized and sophisticated in terms of material and design. To meet these new market needs, Jinfa Labi has chosen to implement Lectra Fashion PLM 4.0 after researching on all PLM vendors in the market. With the help of this solution, the company aims to further improve their product development process by digitizing their entire supply chain, from design to production, enhancing business agility and collaboration. By embracing digitalization, the company hopes to make progress in adopting the government initiative “Made in China 2025”.

Lectra’s ultimate collaborative platform—Lectra Fashion PLM 4.0—gives fashion and apparel companies the extra speed and agility they need to tackle the challenges of Industry 4.0 head on. With the widest functional scope on the market, this technology serves as the intelligent backbone for the digital supply chain, facilitating the entire design-to-production process. This ensures a consistent flow of error-free data between process, technology and people, thus enabling organizations to quickly adapt to different business models and keep pace with the latest trends.

“As one of the first domestic companies to engage in R&D, design, production and distribution of baby clothing, Jinfa Labi is now growing exponentially. We are looking for a partner with a worldwide perspective and in-depth knowledge on the industry’s best practices,” said Lin Ruowen, General Manager, Jinfa Labi. “And Lectra fits the bill. Their latest PLM solution connects CAD, industry-standard software, company IT systems and external suppliers together, allowing us to fully digitize our supply chain by covering all production stages. We can then focus on improving our core competencies.”

“We are confident that Lectra will help Jinfa Labi make their mark for “Made in China 2025”. This Industry 4.0-based initiative will not only revolutionize the way in which manufacturers operate but also change the way in which the brands and retailers run their businesses. Lectra is committed to providing the technology and support that our customers need to thrive in this new digital era,” said Andreas A. Kim, Managing Director, Lectra, Greater China. “Lectra Fashion PLM 4.0 is the only PLM solution purpose-designed for the fashion industry that covers the entire value chain. We hope to leverage our 44 years of experience in the fashion industry to help Jinfa Labi succeed through operational excellence.”