From the Sector

RadiciGroup and Atalanta Bergamasca Calcio announce the renewal of their partnership for the 2024/25 season. RadiciGroup will be the "Sponsor del Cuore" (Heart Sponsor) for the Italian Serie A league and the Supercoppa Italia, which will take place in January 2025 in Riyadh, while it will be the "Sleeve Partner" in the UEFA Champions League and Coppa Italia matches.

RadiciGroup therefore remains the "Sponsor del Cuore" of the Atalanta team, renewing the partnership started in 2017. Over these years, during which the Nerazzurri have achieved success, RadiciGroup has always supported the management, coach, players, and staff of Atalanta. This relationship is based on shared values such as attention to the territory, passion for the black and blue colours, and the ability to showcase an incredible game that highlights each player's talent within a winning team. Atalanta concluded the 2023/24 season triumphantly, winning the Europa League and giving Bergamo fans a trophy.

In the second quarter of 2024, the order index for Italian textile machinery, as reported by the Economics Department of ACIMIT – the Association of Italian Textile Machinery Manufacturers, showed a decline compared to the period 2023 April-June (-17%). In value terms, the index stood at 49.8 points (base 2021=100).

This result is completely due to the decrease recorded in foreign markets (-22%), where orders represent 86% of the total. Conversely, in Italy, there was a 25% recovery compared to the second quarter of 2023. The absolute value of the index in foreign markets was 48.8 points, while in Italy it was 57.3 points. In the second quarter, the order backlog reached 4.3 months of assured production. Additionally, ACIMIT’s survey shows that in the first six months of 2024 the utilization rate of production capacity by Italian manufacturers was 61%. This percentage is expected to rise to 64% in the second half of the year.

Marco Salvadè, president of ACIMIT, stated: “The order index for the second quarter shows a clear slowdown abroad compared to last year. This decline highlights the high uncertainty due to the difficult geopolitical situation“. The confirmation of what is indicated by the ACIMIT index also comes from Italian export figures, updated to the first quarter of 2024. Excluding China and Egypt, the main foreign markets show a general decline in demand for textile machinery, not just Italian one.

Today more than ever, sustainability in the fashion sector is an imperative that is reshaping the dynamics of the sector. These are important changes driven both by increasing CSR regulations (for example, Business of Fashion revealed that, according to 87% of players, the new regulations will impact their company in 2024), and by consumers’ habits (increasingly sensitive to the topic and consequently more careful in purchasing choices). In this scenario, Lectra analyzed real-time data from Retviews – its artificial intelligence-based solution specialized in competitive intelligence and automatic benchmarking – and unveils how Retviews’ empowers brands to navigate the complexities of sustainable and optimized collection planning.

According to Retviews data, to face sustainability challenges and best orient in the current complex fashion landscape, it will be crucial for brands to keep 5 key indications in mind:

1. Planning sustainable collections
Faced with the new regulations, brands are called to rethink their strategies, without losing sight on performance. For this reason, brands are already moving to optimize and rationalize the creative processes of their collections with a view to sustainability. In particular, Retviews' real-time data analysis reveals a growing trend towards sustainability in the collections of leading brands, where there are important investments in sustainable fabrics for both upper and lower garments. In particular, in the "Top" section, shirts show the most significant growth year over year among the eco-responsible options.

2. Sustainable prices (in every sense)
In this context, the redefinition of prices requires a strategic balance between market dynamics and the consumer's willingness to pay for products redesigned in terms of CSR. Retviews data shows a significant increase in costs in sustainable top collections. However, has this shift affected stock levels?

3. Inventories: optimized management
Tracking stock levels is crucial to season management, as it helps identify best-selling items and trends, as well as identify which items would sell better at full price versus those that should be discounted.
The new premium prices for sustainable collections require optimization of the sales rate, a waste limitation to minimum and a reduction of unsold goods rate.
Analyzing the tops category - In the tops category, where sustainably made products prevail with significantly higher price points than generic tops, Retviews' real-time data reveals that sustainable collections boast a higher sell-out rate compared to non-sustainable products. This superior sell-out rate underscores consumers' willingness to pay a premium for sustainability

4. Traceability and certification of collections
Certification is essential in verifying sustainability claims, fosters trust and ensures compliance. Not only that, it is also important to understand the value of the certifications and which ones appear most frequently in the various markets so as to make targeted decisions and adapt the assortments accordingly. This also let brands to prioritize the right mix of fabrics that can reflect the desires of local consumers. Retviews data highlights a particular focus on “Recycled Claim Standard” (RCS) certification in Europe and on “Fair Trade” and “Good Cashmere Standard” certified garments in the United States.

5. Mix of sustainable fabrics
About environmental impact, fabrics also play a fundamental role. Through data-driven tools, brands are able to find valuable information on sustainable materials that are gaining tractions in collections and thus make informed and strategic decisions in the process of planning their creations.

The first installations of the Trützschler Card TC 30i and the Trützschler Integrated Draw Frame IDF 3 are now complete – and the first customers have finished rigorous testing in direct spinning applications.

The Italian company Marchi & Fildi, headquartered in Biella, was one of the first to test the new IDF 3. The company specializes in producing pure and blended yarns made from natural or man-made fibers for flat knitting, circular knitting and weaving. Its products are used for fashion, furnishings and technical applications worldwide. It also places a strong focus on reducing its environmental impact.

Marchi & Fildi’s first trials were carried out with different fiber blends. This included a blend of 70 % soft waste cotton and 30 % polyester as the raw material for rotor direct spinning, with a yarn count in a range of Ne 8 to Ne 12 and Ne 30.
Later tests involved fiber blends of 50 % PET and 50 % recycled cotton from hard textile waste for rotor direct spinning with a yarn count of Ne 30. Experts at Marchi & Fildi stated that this material blend is typically very challenging. Processing secondary fibers made from hard textile waste requires very high competence in yarn production, which Marchi & Fildi impressively demonstrates. It also requires advanced technologies. This is due to technological challenges such as significantly lower fiber length. Trützschler’s IDF technology has a special drafting zone geometry that ensures reliable fiber guidance and controls floating fibers. It generates lower drafts than a conventional draw frame passage and avoids the risk of false drafts and count variations.

Decades of experience with the IDF technology have demonstrated that the higher the short fiber content, the better the result with IDF compared to conventional two draw frame passages. In combination with the TC 30Ri, a variant of TC 30i that has been specifically equipped and configured for processing recycled fibers, the IDF 3 delivers maximum possible quality for the production of sustainable yarns.

Overall, the company’s results showed a 75 % increase in productivity over the previous card model and a 14 % reduction in energy consumption at higher production rates. Combining the TC 30Ri and IDF 3 also enabled Marchi & Fildi to skip the drawing stage from its process, which boosts quality while saving resources and cutting costs.

Mayer & Cie. presented an overview of its current portfolio in the circular knitting sector at the ITM in Istanbul. Two machine types – the SF4 3.2 III and the Relanit 3.2 HS II – and various smart solutions that make circular knitting more efficient were on display. knithawk, a tool for the optical detection of knitting defects, met with interest among the visitors. The same was true for knitlink, Mayer & Cie's hub for digital solutions. Spare parts packages and conversion kits are also in demand for the long-term value retention of Mayer & Cie. machines.

Relanit 3.2 HS II
The Relanit 3.2 HS mechanical single jersey machine offers high productivity, especially in the context of elastic plating. It processes a wide range of yarns and qualities reliably. It is suitable for processing recycled yarns. Their energy consumption is up to a third lower than that of a circular knitting machine with conventional technology.

In Istanbul, Mayer & Cie. presented an updated version of its flagship, the Relanit 3.2 HS II. The new open-width take down is the single component that attracted the most interest. It ensures a uniform pull-off tension of the knitted fabric over its entire circumference. The knitted hose is only opened below the take-down rollers. Furthermore, the take-dwon is equipped with two drives: one for tensioning, one for rewinding. Both can be controlled separately.

Another innovation of the Relanit 3.2 HS is aimed at reducing downtimes: The needle with predetermined breaking point, which was developed together with Groz-Beckert, prevents it from breaking uncontrollably and, in the worst case, breaking needle butt. The new spring sinker is also a joint development with Groz-Beckert. This makes the Relanit 3.2 HS II run more smoothly, produce less noise as well as with less wear and tear.

SF4-3.2 III for lightweight three-tread fleece knitted fabrics
With its SF4-3.2 III, Mayer & Cie. is addressing a trend in the clothing industry that is reflected beyond Turkey: lightweight, elastic three-thread knitted fabrics in both pure cotton and blends.

New Control 5.0 machine control system
Both ITM machine exhibits were on display with the new Control 5.0 machine control system. Control 5.0 is a prerequisite for using knitlink, the hub for Mayer & Cie's digital applications. In this function, the machine control system attracted interest from various large customers.

In the standard SmartControl version, as shown in Istanbul, a so-called Smart Knob is attached to each machine foot. From there, all the functions that the machine operator needs for his work are available. More in-depth settings, such as those made by the knitting manager, are only possible from a mobile device. Any number of Mayer & Cie. machines can be operated from this at the same time.

knithawk
knithawk, a tool for optical defect detection, inspects the knitted fabric as it is produced. It sits in the single jersey machine directly at the knitting point. If knithawk detects a serious or recurring error, the machine is stopped. The tool also creates an error log.

Machine-specific upgrade and conversion kits
With its upgrade kits, Mayer & Cie. brings technological innovations to existing machines. These range from machine-specific upgrades, such as the Performance Kit for existing Relanit 3.2 models to the Senso Blue RS lubrication system.

In addition to the upgrade kits, Mayer & Cie. offers conversion kits for popular machine types. Two are currently available: for the MV4 3.2 II/MBF 3.2 and the S4-3.2 II/ SF4-3.2 III.

Cascale (formerly the Sustainable Apparel Coalition) will host Manufacturer Forum: Shanghai on June 28, part of an annual series of events designed to amplify the voices of manufacturers around the globe. Featuring targeted programming designed to address local challenges faced by manufacturers, the event will highlight solutions provided by Cascale’s Higg Index suite of tools and growing list of impact initiatives. The event takes place at the Shanghai New International Expo Center in collaboration with ISPO Shanghai, the multi-segment summer trade show.

Following successful runs in Bangalore, Dhaka, and Shenzhen, Manufacturer Forum: Shanghai will further facilitate pre-competitive collaboration in order to share best practices and collectively address critical challenges. Keynote speakers include Colin Browne, the organization’s newly-appointed CEO, and Scott Raskin, CEO of Worldly, Cascale’s technology partner and event sponsor.

Reflecting “Catalyst for Change,” the current theme of Cascale’s Manufacturer Forum series, the Shanghai event reinforces the organization’s commitment to support an open exchange between manufacturers and better understand their needs and ongoing challenges to jointly develop solutions.

Over 200 attendees are expected to attend the event, which brings together manufacturers with business leaders and critical stakeholders. Programming will cover a wide range of topics, including what manufacturers need to know about global policy, how strategic partnerships can drive industry change, the evolution of Higg FEM and verification processes, and the latest on decarbonization impacts. To aid goal and target-setting, there will also be dedicated training on setting Science-Based Targets for decarbonization, as part of an evolving and interactive program.

Electronics For Imaging, Inc. reported that at drupa 2024, running through 7 June at Messe Düsseldorf, it is highlighting its expertise in single-pass printing solutions for packaging, display graphics, and textile markets.

Visitors to EFI’s stand will see some of the companies latest single-pass innovations live, including the Packsize® EFI™ X5® Nozomi, a full-colour, on-demand, right-sized box system that prints, cuts, creases, glues, and erects customised boxes at the rate of up to one box every 6 seconds, and the EFI Nozomi 14000 SD single pass printer for sign and display. The company is also showcasing a vast array of applications produced on the new Nozomi 14000 AQ true water-based, single pass printer for corrugated packaging and displays and the Nozomi 12000 MP single-pass technology for direct-to-metal package printing, as well as the next generation EFI Reggiani BOLT XS single-pass textile printer.

In addition to showcasing single-pass inkjet printing at the show, EFI is also introducing two new software solutions that add to the value of single-pass technology, including:

• EFInsight, cloud-based intelligence that optimises the operational efficiency and TCO of EFI packaging, display graphics, or textile digital inkjet printing systems with cloud-based data collection, analytics, reporting, proactive maintenance, and process control tools. It delivers the insights needed to understand the economics of production and the tools to maximise inkjet printer investments. It is currently available for EFI Nozomi single-pass printers for packaging.
• EFI’s Life Cycle Assessment tool for Nozomi printers, which documents Nozomi’s environmental footprint, developed in partnership with Clean Agency. This tool, which EFI customers and their customers can use, analyses their CO2 emissions as part of their overall packaging Extended Producer Responsibility (EPR), and has proven that printing corrugated materials on the EFI Nozomi digital press reduces Global Warming Potential (GWP) by over 50% when compared to analogue printing technologies.

• CARBIOS, L’OCCITANE en Provence and Pinard Beauty Pack join forces to establish an efficient European value chain for PET circularity
• The 100% biorecycled transparent bottle (from enzymatic recycling) will be on display at CARBIOS’ booth D02 at “Edition Spéciale” by LuxePack, held 4-5 June at the Carreau du Temple in Paris
• A key step towards achieving L'OCCITANE en Provence's eco-design commitment of 100% retail bottles made from 100% post-consumer recycled PET by 2027

CARBIOS and L’OCCITANE en Provence, an international cosmetics brand using natural and organic ingredients and long-term partner of CARBIOS, present a bottle in transparent PET made entirely from enzymatic recycling for a shower oil from the Amande range. In collaboration with converter Pinard Beauty Pack, this bottle exemplifies a shared desire to build en efficient European recycling sector to accelerate the transition to a circular economy for plastic, and meet brands' commitments for more sustainable packaging solutions. The bottle will be on display at CARBIOS’ Stand D02 at “Edition Spéciale” by LuxePack, the trade show dedicated to sustainable premium packaging, to be held on 4-5 June 2024 at the Carreau du Temple in Paris.

The 100% recycled PET bottle from CARBIOS' enzymatic depolymerization process was made with a European value chain committed to responsible consumption of sustainable materials. The bottle’s production began with the local supply of PET waste (already collected, sorted and prepared) to the CARBIOS industrial demonstrator in Clermont-Ferrand, France. The waste used consisted of colored bottles, multilayer trays and mechanical recycling residues, none of which are currently recycled using conventional technologies. CARBIOS deconstructed the PET waste into its original monomers, PTA and MEG, using its biorecycling technology. The resulting monomers were then repolymerized into new, fully recycled PET resins within Europe. In Oyonnax, France, these resins were blow-molded by Pinard Beauty Pack to create bottles according to L’OCCITANE’s specifications, and then filled with its shower oil at its Manosque plant.

Solvay held its Ordinary General Shareholders’ Meeting in Brussels, and shareholders voted in favor of all the proposed resolutions.

Solvay shareholders showed support to all resolutions and more specifically:

• The payment of a gross dividend of €2.43 per share for the year 2023. After deducting the interim dividend of €1.62 gross per share, paid on 17 January 2024, the balance amounts to €0.81 gross per share, payable from 5 June 2024.
• The re-election of Ms. Aude Thibaut de Maisières as a board member for a four-year term.
• The remuneration report.
• The appointment of EY for the assurance of sustainability information related to the Corporate Sustainability Reporting Directive (CSRD)

Flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Argentinian representative TEMCO ARGENTINA S.A., will participate in the SIMATEX exhibition in Buenos Aires, Argentina (21st - 23rd May 2024).

SHIMA SEIKI will exhibit a wide range of products, including proposals in seam-free WHOLEGARMENT® knitting technology as an alternative to labor-intensive manufacturing in the South American market. Three MACH2®VS machines, capable of knitting WHOLEGARMENT® knitwear using every other needle, will be shown in 12, 16 and 18 gauge. N.SVR®122, shown in 5 gauge, is the industry benchmark for shaped knitting, featuring such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb.

Demonstrations will be performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. SDS®-ONE APEX4 provides support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the product planning and design evaluation process by replacing physical samples with digital prototypes based on photo-realistic simulations. These virtual samples realize significant savings in time, cost and material, contributing to sustainable manufacturing.