From the Sector

Two long-established companies are joining forces: as of October 2021, textile finishing specialist AG Cilander from Herisau, Switzerland, will acquire 100 percent of ALUMO AG, an Appenzell-based manufacturer known for producing ultra-fine cotton fabrics to exacting Swiss quality standards.

The textile finishing industry is an environment in which quality, new technologies and a keen interest in innovative textile solutions play a crucial role. In this business, strong, reliable alliances with customers and partners are vital pillars to allow growth while still satisfying the high expectations set for the materials used. By acquiring ALUMO AG, the world leader in ultra-fine cotton fabrics, AG Cilander expands into a new market segment, setting the course for successfully broadening its product portfolio and tapping into new sales markets.

Both companies can look back on a long tradition of expertise in the textile industry, and their partnership has been a very successful one for years.

ALUMO AG will continue to operate as an independent company based in Appenzell, keeping the same strategic direction in the fabrics offered and the same standards for excellence in service and quality.

• Next-Gen Technologies for Nonwovens/Engineered Materials
• Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

• Sustainable Solutions for our Plastic Planet Predicament, by Marc A. Hillmyer, Ph.D., McKnight Presidential Endowed Chair, University of Minnesota;
• Closed-Loop Recycling Pilot of Single-Use Face Masks by Peter Dziezok, Ph.D., Director of Open Innovation, Proctor & Gamble;
• Innovating a Sustainable Future for Nonwovens: A European Perspective, by Matt Tipper, Ph.D., CEO, Nonwovens Innovation & Research Institute (NIRI);
• Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology, by Fabio Zampollo, CEO and Founder of Teknoweb Materials; 
• Guiding Environmentally Sustainable Innovations – From Reactive to Proactive Life Cycle Management, by Valentina Prado, Ph.D., Senior Sustainability Analyst, EarthShift Global LLC;  
• High-Loft, Ultra-Soft Hygiene Solutions, Paul E. Rollin, Ph.D., Senior Principal Scientist – Global Hygiene, Propylene-Vistamaxx-Adhesion (PVA) Global Technology, ExxonMobil Chemical Company;
• Canadian Plastic Policy Update, by Karyn M. Schmidt, Senior Director, Regulatory & Technical Affairs, American Chemistry Council (ACC).

Other highlights included the announcement of Canopy Respirator as the winner of this year’s RISE® Innovation Award winner. The annual award recognizes innovation in areas within and on the periphery of the nonwovens industry which use advanced science and engineering principles to develop unique or intricate solutions to problems and advance the usage of nonwovens.

RISE® Innovation Award Winner
The RISE® Innovation Award was presented to Canopy for their Canopy Respirator. The productis an innovative respirator that is fully mechanical, non-electrostatic, with a filter designed for superior breathability while offering the wearer facial transparency. The breakthrough respirator features 5.5mm water column resistance at 85 liters (3 cubic feet) per minute, 2-way filtration, and a pleated filter that contains over 500 square centimeters of surface area. The patented Canopy respirator resists fluids, and eliminates fogging of eyeglasses.

The UK’s Fibre Extrusion Technology (FET) will introduce its new lab-scale spunbond system at the forthcoming INDEX 2020 nonwovens exhibition taking place in Geneva, Switzerland, from October 19-22.

The new spunbond range provides unprecedented opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents.

FET has already supplied one of these new spunbond lines to University of Leeds in the UK, and a second, in combination with a metlblown line, to the University of Erlangen-Nuremberg in Germany.

“Our new spunbond technology is unique in providing the ability to process a wide range of polymers, including those normally not considered appropriate for the spunbond process, at the scale required to fully explore material combinations and bring new products to market,” says FET Managing Director Richard Slack. “FET has built on its melt spinning expertise to develop a true laboratory scale spunbond system.”

WEIDMANN GmbH in Süßen is known worldwide as a specialist for the finishing of fiber and down-proof articles and woven industrial fabrics. Customers particularly appreciate the company's reliability and flexibility with regard to their individu-al requirements, and consistently high quality of its products. The Swabian textile manufacturer finishes premium fabrics, mainly for the bedding industry, using the latest technology and in an environmentally conscious manner.

The complex production and finishing processes for high-quality fabrics require a reliable and efficient machine technology. With this in mind, WEIDMANN has always relied on the proven stenter technolo-gy from BRÜCKNER. For many decades, the German textile machinery manufacturer has been a world leader in the con-struction of production lines for the finishing of classical textiles, woven industrial  fabrics, nonwovens, glass fabrics and floor coverings. In addition to stenters, the company's production program also in-cludes coating lines, relaxation dryers, sanfor lines, continuous dyeing lines as well as ovens for the bonding of nonwovens and other special lines. All machines are produced 100% in-house in Germany.

Both companies continuously invest in new and innovative technology in order to be successful and competitive today and in the future. Only Recently, a completely newly developed BRÜCKNER stenter was installed in the ultra-modern plant at WEIDMANN. During the intensive project engineering phase it soon became clear which features are of special importance for their daily production requirements:

• uniform moisture distribution in the machine entry and during pick-up of the specialized   chemicals in the finishing padder before the thermoprocess
• weft-straight fabric flow with minimized residual distortion
• very good accessibility for maintenance and daily cleaning
• sensor technology and automation of setting parameters for energy optimization
• heat-recovery with hot water generation for the dye house
• the line must be fully Industry 4.0 capable

Textechno reports launch of a new standard for the drapability and deformability of fabrics and non-wovens: ISO 21765

World market leader for precision testing equipment Textechno and their partner SAERTEX, global market leader in non-crimp fabrics (NCF) are proud to announce that the newly developed international standard ISO 21765:2020 to quantify material behaviour in terms of drapability and deformability was recently published by ISO.

The new standard ISO 21765 allows the world-wide comparable measurement of all relevant parameters regarding the deformability and drapability of all kinds of fabrics, including woven fabrics and NCFs as well as knitted fabrics and non-wovens on Textechno´s precision testing equipment DRAPETEST. This can be very useful in the carbon fibre recycling since one of the most efficient applications of recycled carbon fibres will be in non-wovens.

This is the first testing instrument world-wide to quantify not only the force which is required for deforming a fabric, but also the various defects such as gaps, undulation, or wrinkles which can arise due to the deformation.

In the frame of a publicly funded project which started in 2011, Textechno developed the award-winning automatic drapability tester DRAPETEST along with other partners, amongst them SAERTEX.  

Dietmar Möcke, CTO at SAERTEX says: „With ISO 21765, we finally have a standardized testing method with world-wide validity. It allows us to provide our customers with comparable and reproducible measurement values regarding the draping characteristics of our products.”

Ulrich Mörschel, Managing Director of Textechno adds: “We are grateful for the support from all around the world allowing us to establish the new ISO standard. The standard finally fills a gap in the testing methods for fabrics both in the fields of textiles and composites.”

Dr. Michael Effing, Managing Director of AMAC GmbH and Senior Advisor to Textechno: “A lot of research is dedicated to new production technologies of composites, non-crimp fabrics and classical fabrics for thermosets have with 33 % a significant market share in the production of all composite materials. The application of the new standard for non-wovens from recycled carbon fibres comes perfectly on time for this market sector which will gain more and more importance within the next years.

ROICA™ by Asahi Kasei, specialized in sustainable premium stretch fibers, and Bemberg™, a fiber made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, have been invited to showcase at Filo, the international fair of orthogonal weaving yarns for clothing and furnishings, circular knitwear and technical textiles from the 29-30th of September.

ROICA™ will show its main innovations and four key pieces of the modern and sustainable contemporary wardrobe able to enhance the versatility of the fibers, applied to fashion, sportswear, legwear and underwear.
The brand will also be the protagonist of “The contemporary consumer: Stretch your imagination with ROICA™ by Asahi Kasei smart innovation” speech on September 30th, 11am, organized by the fair to tell its sustainable story.

Bemberg™ will be at Filo showing some selected fabric innovation, and three responsible-driven designers representing different and complementary part of contemporary consumer wardrobe: ZEROBARRACENTO, Maurizio Miri and WAXEWUL.
Bemberg™ will be also involved in two speeches – entitled “Il viaggio di Bemberg™ by Asahi Kasei verso una moda contemporanea, premium e responsabile” - organized by the fair (Sept. 29th and 30th at 4pm), where it will share its story made of creation, production and process, as well as product performance, aspects related to sustainability and circular economy approach.

• FILO, 29th-30th September 2021, booth C5

Bemberg™ by Asahi Kasei has been invited to showcase at Filo fair, the international exhibition of orthogonal weaving yarns for clothing and furnishings, circular knitwear and technical textiles, in a new special area, a dedicated open space reserved to sustainable fibers that will allow visitors to discover all their production cycle and performances, in full relax and transparency.

Bemberg™, an exceptional fiber made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, will brings to Filo its history, experience, know-how and market partnerships to prove its versatility and design-driven look and touch Last but not least we are talking about a true circular economy-oriented ingredient, with certified sustainable performance: Bemberg™ is biodegradable and compostable material as verified by the INNOVHUB 3rd party test and it has GRS (Global Reycled Standard) certification from Textile Exchange proving recycling authenticity.

Bemberg™ application history starts with high-quality suit lining, but today we can find it in many other applications such as fashion couture, outerwear, innerwear, bedding, and sportswear where its amazing unique touch and quality is offering a distinctive performance.

And to prove all of this, Bemberg™ will be at Filo showing some selected fabric innovation, and three responsible-driven designers representing different and complementary part of contemporary consumer wardrobe: ZEROBARRACENTO, Maurizio Miri and WAXEWUL - who have all chosen Bemberg™ fiber to create special collections. Three different ways to see and represent how sustainability and style – even if completely different ones – together can be highly successful, performing and interesting to the new consumer.

ZEROBARRACENTO, a gender-neutral emerging outerwear brand focusing on zero-waste product development, selects Bemberg™ for two fundamental reasons: firstly, from a stylistic point of view for its extreme versatility: in the various collections we have adopted it to create Kimonos, padded jackets, wrap dresses as well as for the interiors of our garments, which are intended to be soft embraces for total physical and mental comfort. The second but no less important reason is that this fibre has circular values in line with their zero-waste commitment.

The concept of the brand "Maurizio Miri" has a strong personality and a clear intent: to create a product that stimulates the wearer towards beauty. A garment should not simply be worn, but it has also to create a perfect symbiosis with the person wearing it and generate an exchange of positive energies. The purpose is to make the individual feel in perfect harmony with their own image. With this aim in mind, the designer selects extremely precious Bemberg™ linings for their sophisticated tailor jackets. 

Finally, WAXEWUL, a brand of sartorial clothing and artisan accessories with an urban-afro soul that has environmental and social sustainability as its basic ethics. WAXEWUL will bring to Filo its brand-new product, the J_Hood Bag: a doubleface jacket with a comfortably removable hood that can be transformed into a finely hidden doubleface bag. An exclusive, innovative and sustainable garment with minimal impact on the environment made of BemBAZIN™ - a new generation of bazin created, patented and produced by Brunello which is composed by the high-tech and responsible fibers of Bemberg™ - on one side and of wax on the other, traceable and certified, guaranteeing a reduction in waste (two jackets in one) and a long-life cycle.

• New HYPER model produces extraordinary printing quality at unparalleled speed, approaching single-pass throughput

Electronics For Imaging, Inc. is launching its third new digital textile printer of 2021, delivering the world’s highest real production throughput for a scanning digital textile printer. The EFI™ Reggiani HYPER is a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths. With an up to eight-colour configuration, the EFI Reggiani HYPER prints at up to 13 linear metres per minute in two-pass production mode, making it the fastest textile scanning printer on the market. The new printer is suitable for high-quality production on knitted or woven fabrics and is designed with smart technology that enables it to be integrated into Industry 4.0 projects.

The new EFI Reggiani HYPER targets the industrial high-speed segment of the multi-pass textile printing sector. Not only is it the fastest multi-pass printer that EFI Reggiani has ever developed, but the fastest of its kind in the market, offering extraordinary printing quality with unmatched productivity.
 
The HYPER’s superfast carriage with 72 printheads can print two passes with production quality at speeds up to 13 metres per minute for a 1.5-metre-wide roll, or up to 10 metres per minute for a 3-metre-wide roll. On a 3.4-metre Reggiani HYPER printer, users can print a pair of 1.5-metre-wide rolls in parallel, delivering a total throughput of up to 20 metres per minute, which is comparable to some single-pass printers currently in the market.
 
The printer is powered by EFI Reggiani genuine inks, with high-quality formulas developed to ensure the best performance in terms of runnability and longer printhead life while producing astonishing colour depth and brightness, as well as excellent fastness properties.       

• Parade Example for physical Trade Shows

A whole year without physical trade fairs, long months without personal exchange: last week the physical International Textile Trade Show MUNICH FABRIC START and the International Denim Trade Show BLUEZONE took place for the textile industry in Munich. The team at Munich Fabric Start Exhibitions GmbH is bringing a bit of normality back to the industry, but also to event management. Thanks to detailed, Covid-19 compliant fair formats, the organisers show that trade fairs are possible and can be successfully implemented with the appropriate measures.

More than 600 international suppliers presented their new collections and developments for Autumn.Winter 22/23 in around 1000 collections in the Fabrics, Additionals, Design Studios, Sourcing, ReSource and Sustainable Innovations areas at MUNICH FABRIC START as well as denim, sportswear and KEYHOUSE at BLUEZONE.

A winning fusion of BLUEZONE & KEYHOUSE well-attended events

Under the motto "BACK TO THE FUTURE", BLUEZONE offered a way back to the tactile experience of textiles and the reunion of the denim community. In addition to international denim weavers and manufacturers, visitors to the Zenith Hall also saw a qualitative selection of KEYHOUSE exhibitors who presented their futuristic innovations for the fashion industry.

Positive visitor & exhibitor echo despite Covid-19 measures

In keeping with the season's title "RISE", the visitors were greeted by inspiring, colourful trend forums with unique highlights for Autumn.Winter 22/23 collection development. In the halls, the industry was able to discover a trade show with the well-known and proven pre-pandemic quality with manufacturers and suppliers presenting in all 8 areas. Non-European suppliers were represented by agencies and offered well-attended show in show concepts.

The newly formed ReSOURCE x SUSTAINABLE INNOVATIONS Area also drew in the crowds. In a modern atmosphere, information was shared on sourcing sustainable textiles and additionals as well as innovative concepts. Another highlight was the launch of FABRIC.iD, the innovative process for the complete digitisation of fabrics to greater serve the industry's digital future.

As the role of lingerie in fashion and athleisure continues to augment, the desire for garments that will meet a new set of values for contemporary consumer lifestyles will flourish. Iluna Group comes back to Interfilière Paris with an important goal: to relaunch the qualities and dimensions of sustainability.

Iluna’s new path begins with the investment in the renewal of machines, which allow it to fly higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

The printing processes are also born from this constant search for innovation towards new materials and new techniques, becoming more and more sustainable: Global Recycle Standard (GRS)-certified sublimation printing and register printing carrying Global Organic Textile Standard (GOTS) certification.