From the Sector

•   Mimaki Tiger-1800B MkII Printers for Faster, High-Quality Textile Printing

Amsterdam - Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, announces today that Pakistani textile company, Moti Fabrics (Pvt) Ltd., is leveraging multiple Mimaki Tiger industrial textile printing units to take its business to the next level. As a result of on the outstanding performance and process optimisation delivered by the Mimaki digital printing equipment, the company has been able to adapt to changes in the textile industry and is now projected to reinforce its market position and expand its capabilities in high-quality textile production.

Headquartered in Faisalabad, Punjab province – the second largest textile hub in Pakistan –, Moti Fabrics (Pvt) Ltd. mainly serves the high fashion industry and uses its cutting-edge technology to print about 100,000 metres daily. Faced with recent challenges in the global textile market, management at Moti Fabrics (Pvt) Ltd. embarked on innovating the company’s business model, shifting from conventional to digital printing. In doing so, the company invested in Mimaki’s advanced industrial textile technology and installed three Mimaki Tiger-1800B MkII units. “We were – and still are – experiencing a massive transformation in the printing segment, with brands demanding high quality products delivered within short deadlines. This change in our customers’ requirements urged us to move to digital printing,” says Muhammad Asif, CEO at Moti Fabrics (Pvt) Ltd. “Our choice has already proved sound as our brand-new Tiger-1800B MkII printing systems have enabled us to cope with the high standards of the fashion industry in terms of both quality and delivery times. In addition, we have been able to gradually enhance our production processes in a cost-effective way.”

The Tiger-1800B MkII is Mimaki’s flagship industrial volume textile printer, available either in dye sublimation configuration for transfer printing or with reactive ink for direct-to-textile printing. Of the three Mimaki Tiger-1800B MkII solutions operating at Moti Fabrics (Pvt) Ltd., two are equipped with reactive inks, enabling the company to directly print onto natural fibres such as cotton and linen, as well as onto manufactured cellulose fibres, including rayon and nylon. The third Mimaki Tiger-1800B MkII features sublimation inks serves the ever-growing printed polyester market, allowing the company to strategically diversify its product portfolio.

“There are several features of the Tiger-1800B MkII that benefit our production and our business at large. The MAPS (Mimaki Advanced Pass System), just to name one, prevents banding and colour-shifting to deliver a higher standard of quality, while the NRS (Nozzle Recovery System) provides uninterrupted production, minimising downtime and ensuring superior results. The sticky belt system together with the large-size ink tanks (with a capacity of 10kg) and the high-performance software RIP TxLink3 are some of the other features that make these printers efficient, user-friendly and reliable,” says Asif.

Asif concludes, “Looking at the future, our aim is to set up a print department featuring only Mimaki’s technologies. We are already considering the next steps to make this possible, knowing that we can count on the support of Signtrade, Mimaki’s dealer in the region and our trustworthy partner.”

Moti Fabrics (Pvt) Ltd. was founded in 1992 by Muhammad Asif’s father Haji Muhammad Yousaf and his partner Haji Rasheed Ahmad. Established as a dyeing company, Moti Fabrics (Pvt) Ltd. was able to gradually diversify the business over the years to become an advanced textile printing specialist. Today, the company is an established provider to the high fashion industry in Pakistan and on an international level.

“The story of Moti Fabrics is incredibly inspiring. Belonging to a region with such rooted textile printing heritage, the company has been able to embrace a new, challenging business model in order to stay at pace with the changing demand from the textile industry and has succeeded,” comments Ronald van den Broek, General Sales Manager at Mimaki Europe. “Customers like Moti Fabrics make us proud as they demonstrate how our advanced Mimaki Tiger industrial textile series can be the enabling technology for those textile companies planning the shift from conventional to digital printing.”

• Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

From 1986, the company’s proficiency as a specialist in solid-colour textiles led to workwear textiles becoming a bedrock of the business. Continuous investments in machinery and technical equipment have resulted in a fully integrated and rationalised single source site dedicated solely to what the company does best – the expert dyeing and finishing of textiles.

Crucial process steps

These stages in the textile value-added chain, Jan Kettelhack has observed, are crucial to the quality of a final product in workwear – whether it stands the test in everyday use, how comfortable it is, and how many washes it can withstand.

Central to this is the sanforizing process, which pre-shrinks a fabric by compressing it prior to washing. This limits any residual or further shrinkage in a made-up finished garment to less than 1%, to ensure perfect comfort and fit over an extended lifetime.

“We certainly can’t complain about the performance of the old Monfortex sanforizing line which gave us so many uninterrupted years of service, but certain spare parts for it were becoming increasingly hard to source, the control unit was becoming a little unstable and we couldn’t risk potential interruptions to our production schedule,” says Kettelhack plant manager Hendrik Pleimann. “In many ways, the new Monfortex sanforizer is much the same as the old one in terms of its mechanical reliability and robust construction, but of course today’s drives are much more efficient, and when it comes to the automation features and control units – and the data we can generate and analyse for increasing efficiency – that’s a whole new world.”

Qualitex 800

The two-metres-wide Monfortex line benefits from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure.

The integrated Compactomat system allows a continuous indication and control of the shrinkage values and the temperatures of the shrinking cylinder and felt calender. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

Full line management can be optimised via the batch-specific calculation of all process material consumption and water and electricity use, with any standstill times analysed and immediately corrected for the future.

Any further assistance required is available via Monforts Teleservice, with direct connection to technicians and virtual access to machine analysis.

Professional

Commissioning of the new Monfortex line at Kettelhack commenced in January and it was fully operational in a relatively short time.

“This was a very professional installation provided by the Monforts team with whom we have a very good relationship dating back many years, and everyone knew what was required from both sides,” says Mr Pleimann. “Our operators have found the new line very user friendly and we are very pleased with how everything proceeded so smoothly. An unexpected benefit is that the new line is also a lot quieter, of course, which is something our operatives are appreciating.”

Key features of the Monfortex line are the proven fabric preparation, weft straightening and spreading units, prior to the compressive shrinkage machine with a 750mm shrinking cylinder, and a felt calender equipped with 2,000mm diameter drying cylinder. The line also features an integrated automatic grinding unit.

Customer service

Kettelhack is processing primarily cotton and polyester woven fabrics, with lyocell becoming increasingly popular in workwear for its softness and comfort.

As part of its customer service, the company stocks more than a million metres of grey fabric and at least 1.2 million metres of finished and rolled standard fabric in its warehouse at any one time, with a further 750,000 metres permanently in production.

While a significant cost, this commitment ensures Kettelhack customers can be fully flexible and rely on it as a partner.

“As a family-run company with around a hundred employees, Kettelhack operates very differently to bigger businesses which have to constantly consider their immediate quarterly profits,” Mr Pleimann concludes. “The thinking at Kettelhack is in terms of the next twenty years and ensuring that the business will be just as successful for the next generation as it is today. We also have a very flat organisational structure in which everyone is involved and takes an active part, which makes it a very nice place to work.”

• Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

As a quality-conscious industrial yarn producer, Kingsway has been manufacturing its sophisticated, high-end yarns on Oerlikon Barmag filament yarn systems since 2015. Alex Yang Yu Long, CEO of Kingsway, is proud of relying on engineering artistry from Remscheid: “As expected, the yarns are first-class in terms of quality. Our products are used in safety equipment, sometimes in situations where lives depend on them. Therefore, there can be no compromises. To this end, we select our partners with the utmost care."

In the AZL Workgroup "High-Performance SMC", a project was developed in cooperation with M-Base, the IKV and the AZL partner network for the efficient and standardized provision of engineering data for SMC. Within the scope of the project, companies can participate in the definition of the required characteristic material data, the guidelines for the production of test specimens and the test specifications.
Sheet Moulding Compounds (SMC) are used in various application areas such as vehicles, electronics, construction and infrastructure.

Driven by the requirements to reduce the production costs of lightweight components, a new generation of SMC components with high mechanical properties is of highest relevance. SMC offers enormous potential to realize structural components with good lightweight characteristics at significantly reduced costs compared to conventional continuous fiber-reinforced components.
In order to further establish SMC in broad industrial applications companies participating within the AZL Workgroup recognized the value of a data bank for data harmonization of SMC to provide the possibility of easily finding the right material with its characteristics for the needed specific requirements.

“The segment of SMC is with 250,000 tons production per year the largest composites market in Europe. I am very pleased that we start now with the project of data harmonization along the complete value chain. The goal is to have a similar data base as already established by Campus® for thermoplastics and thermoplastic composites. Only with a reliable set data we can convince the engineering experts to use SMC in a larger variety of applications,” says Dr. Michael Effing, Chairman of the Board of AVK and Composites Germany.

As of right now a databank for engineered thermoplastic materials (by Campus®) already exists and is offering an immense value.
Under the lead of M-Base, Dr. CEO Erwin Baur who has successfully established the CAMPUS database, the AZL, IKV and companies along the value chain of long fibre reinforced SMC initiated to build a CAMPUS-compatible data structure and material characterization methodology during the High-Performance SMC Workgroup Meetings.

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

The multi-rotor Tiger Drones typically carry spraying equipment and can also carry high definition cameras that provide a wide range of field information. Farmers can measure land profiles, identify any problem plants or areas and manage their cultivation in the most efficient way. The 420 mm square shaped fuselage cover protects the drone’s electronic controls and forms an aerodynamic fairing between the central fuselage and the craft’s 4 rotor arms.
 
The COBRA Design and Development team selected a composite laminate of glass fibre reinforcements for the cover – which don’t interfere with GPS signals used by the drone - and combined these with epoxy laminating resins in a hand laminated, vacuum bag consolidated production process.

COBRA also designed all of the mould tools for the project. The 2-piece aluminium mould was produced by one of COBRA’s long-term tooling partners. This metallic tooling provides an excellent surface finish to the part with absolutely minimal trimming and finishing required.   Moulded parts can go swiftly through a painting and clear coating process before final inspection and delivery to the client.

Danu Chotikapanich, CEO of COBRA International comments: “Our collaboration with HG Robotics is going well, and we are hoping to collaborate further with them on other multi-rotor and fixed wing VTOL (vertical take-off and landing) drone models in the future. These are COBRA’s first parts for the agricultural industry, and they provide an exciting vision as to just a few of the possibilities for lightweight composites in this area and also in the wider commercial UAV market as a whole.”

• Contracts signed for seven projects
• Contract comprises delivery of compact- and ring-spinning systems
• Total amounts to roughly CHF 180 million
• Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

Dr. Klapper was very pleased at the formal signing of contracts: “We would like to thank our Egyptian business partners for the confidence they are placing in Rieter by awarding us this contract. Rieter has been the partner of choice of the Egyptian spinning industry for decades. We are delighted to be given the opportunity of making such an important contribution to the modernization of the Egyptian textile industry.”

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

• +230 companies
• 45 speakers
• +7,000 professional visits
• 49 countries represented
• 12 JEC Innovation Awards
• +450 Business meetings
• 3 Composites Tours
• Top 3 visitors’ countries: Korea - China - Japan

Gauging from the attendance of more than 7,000 professional visits from 49 countries, Eric PIERREJEAN, CEO of JEC Group, has already announced during the opening ceremony that JEC Asia 2019 will return next year on November 13, 14, 15, 2019. This ceremony was attended by industrialists, academics and officials, reflecting the huge interest that composite materials generates. Thus, at this ceremony we could notice the participation of Mr. BANG Yun Hyuk, President of KCTECH, Mr. Song, Ha Jin Jeonbuk Provincial Governor, Mr. HAN Byung Do, Senior secretary to the South Korean President for political affairs, Mr. CHOI Jin Hyuk, Director at MOTIE, Mr. KIM Yang Won, Vice Mayor of Jeonju, demonstrating the whole support of the Korean community; and Mr. Fabien PENONE, French Ambassador, was also present to underline the strong links and industrial interactions between Korea and France.

Hosting, this year again, the International Carbon Festival organized by KCTECH and the Jeonju region, JEC Asia also provided a comprehensive program dedicated to the Automotive professionals with a leadership circle attended by top stakeholders of the industry worldwide, top-notch conferences on automotive automated processes and composite applications for structural parts with speakers from Hyundai Motor Group, e-Xstream Engineering, L&L Products, Cobra International, Hanwha Advanced Materials, Daimler, Hankuk Carbon, Arkema, Cetim, Saertex & Co. KG to name a few.

“Aeronautics: 53% and beyond” conferences took place and attracted many attendees to discover new composites solutions and their wider use in this sector with Stratasys,IS Group, Cevotec… JEC Asia also offered its participants a chance to find out new business opportunities, highlighting the most relevant for the region and various application sectors.
All in all, the show floor was filled with innovations as JEC Asia 2018 showcased innovative parts and awarded 12 composites International champions among which 3 were about automotive, at the JEC Innovation Awards ceremony.

Also, to be noted at JEC Asia was the focus on networking with pre-arranged Business meetings that generated +450 qualified one-to-ones over the 3 days. Likewise, 3 composites tours opened exclusive doors to attendees when they visited Hanyang University, the composite architecture of the House of Dior, LG Hausys & Kolon and a day trip in Jeonju region and the Carbon Valley of the KCTECH.
For the first time, JEC Asia teamed up with MAI Carbon to offer a brand-new Student Program that keeps abreast of composite-industry needs to hire young, committed well-trained engineers. The two-part program included workshops with a focus on theoretical foundations and a guided tour through the JEC Asia trade show and the innovation planet.

The Aachen Center for Integrative Lightweight Production (AZL) of RWTH Aachen University is installing a new ENGEL injection molding system in its technical center. Engel Deutschland GmbH – in cooperation with the ENGEL Centre for Lightweight Composite Technologies in Austria – will install the 2-component injection molding system with turning plate and 17,000 kN clamping force in 2019. This machine setup is the basis for further developments of efficient inline-combination technologies using different kinds of polymer performance materials.

The ENGEL injection molding system will enable innovative combinations of already established fiber-reinforced plastics (FRP) processes and the development of new individual processes. The focus is on increasing resource efficiency in lightweight production. With the new equipment, new research and development initiatives can explore the more efficient use of materials, which are eventually the key to the mass production of lightweight components. The research will address multi-material systems, continuous processes, process chains as well as self-optimizing processes.

Dr.-Ing. Michael Emonts, Managing Director of the Aachen Center for Integrative Lightweight Production (AZL) is looking forward to realizing new innovative lightweight production process with the new injection molding system: “This new injection molding system offers us as specialists for lightweight production technology in cooperation with the injection molding experts of the Institute of Plastics Processing – the IKV – the opportunity to establish hybrid processes for industrial lightweight applications. The system will expand our existing machinery in the AZL Technical Center and will be available as an important platform for lightweight production research at RWTH Aachen University.”

Being a Partner of the AZL, ENGEL has already been working closely with the AZL for many years as a Partner Company of the AZL Partner Network. Dr. Stefan Engleder, CEO of the ENGEL Group, emphasizes the importance of close collaboration with technical universities and especially with the AZL: “The AZL provides great conditions for industry-related research activities in the field of lightweight composites as it is characterized by a strong interdisciplinary approach. It benefits from the great infrastructure and the collaboration with well-known institutes of the RTWH Aachen University. ENGEL is looking forward to working together with the AZL on developing efficient lightweight composite mass production processes.”

In addition to the numerous composite and lightweight equipment at the RWTH Aachen Campus, the AZL Technical Center comprises large-scale equipment for the development of processes for lightweight production, such as a composite press from Schuler Pressen GmbH with 18,000 kN clamping force.

Emphasis on Process, Third-party Validation and Outcome-based Testing

Ventura Uniform Services of Kenner, Louisiana has had their certification renewed for Hygienically Clean Healthcare, reflecting their commitment to best management practices (BMPs) in laundering as verified by on-site inspection and their capability to produce hygienically clean textiles as quantified by ongoing microbial testing.

The laundry was first certified in 2014. Recertification confirms the organization’s continuing dedication to infection prevention, compliance with recognized industry standards and processing healthcare textiles using BMPs as described in its quality assurance documentation, a focal point for Hygienically Clean inspectors’ evaluation. The independent, third-party inspection must also confirm essential evidence that:

• Employees are properly trained and protected
• Managers understand regulatory requirements
• OSHA-compliant
• Physical plant operates effectively

To achieve certification initially, laundries pass three rounds of outcome-based microbial testing, indicating that their processes are producing Hygienically Clean Healthcare textiles and diminished presence of yeast, mold and harmful bacteria. They also must pass a facility inspection. To maintain their certification, they must pass quarterly testing to ensure that as laundry conditions change, such as water quality, textile fabric composition and wash chemistry, laundered product quality is consistently maintained. Re-inspection occurs every two to three years.

This process eliminates subjectivity by focusing on outcomes and results that verify textiles cleaned in these facilities meet appropriate hygienically clean standards and BMPs for hospitals, surgery centers, medical offices, nursing homes and other medical facilities.

Hygienically Clean Healthcare certification acknowledges laundries’ effectiveness in protecting healthcare operations by verifying quality control procedures in linen, uniform and facility services operations related to the handling of textiles containing blood and other potentially infectious materials.

Certified laundries use processes, chemicals and BMPs acknowledged by the federal Centers for Disease Control and Prevention (CDC), Centers for Medicare and Medicaid Services, Association for the Advancement of Medical Instrumentation, American National Standards Institute and others. Introduced in 2012, Hygienically Clean Healthcare brought to North America the international cleanliness standards for healthcare linens and garments used worldwide by the Certification Association for Professional Textile Services and the European Committee for Standardization.

Objective experts in epidemiology, infection control, nursing and other healthcare professions work with Hygienically Clean launderers to ensure the certification continues to enforce the highest standards for producing clean healthcare textiles.

“Congratulations to Ventura Uniform Services on their recertification,” said Joseph Ricci, TRSA president and CEO. “This achievement proves their ongoing commitment to infection prevention and that their laundry takes every step possible to prevent human illness.”

• In its aim to promote composites materials, JEC Group will highlight the latest technologies that enable the automotive industry to innovate in product design, emission reductions and production.

Paris - In its mission to address composites end-use industries specifically, JEC Group, the world leading organization for the promotion of composite materials, moves up a gear to target the automotive industry. Introduced many decades ago in car manufacturing, and not only for high-end performance models, composites are now offering many alternatives to steel and aluminum, thanks to their specific features, which go far beyond their lightweight properties.

“Today, nearly 2.9 cars are produced and sold worldwide every second. Yet growth potential is still enormous. In value, the automotive industry makes up 20% of the total composites market with promising opportunities for lighter, stronger and more efficient materials in the years to come. They offer new design opportunities, enable a reduction in tooling investment and allow several functions to be integrated in one, on top of their corrosion and impact resistance. Furthermore, composite materials contribute to the development of a new generation of cars, offering innovative battery integration solutions for electric vehicles, as well as a new generation of fuel storage tanks for hydrogen-powered vehicles. JEC Group is moving forward in its strategy to democratize and promote the use of composites materials among end-user segments that, in this case, are OEMs and car manufacturers,” said Ms Frédérique MUTEL, JEC Group President & CEO.

The BMW i3 the largest-volume production car ever to extensively use composites for emission-free mobility

With this in mind, JEC Group will invest in a significant number of composites pavilions at key automotive events in Europe, America and Asia. The first of these will be at Mondial.Tech Paris, part of Paris Motor Show, held on October 2-6, 2018 in Paris. The composites pavilion will include an innovation showcase, expert presentations and networking activities.

The second composites pavilion will be at the North American International Auto Show in Detroit on January 14-18, 2019 and will focus on the same goals of sharing knowledge and developing networking.

Additional events, particularly in Asia, are being planned to cover the global automotive market.

Although the composites pavilions are organized by JEC Group, they will be supported by major composites manufacturers. These combined efforts will enable stands to showcase several solutions provided by composites for the automotive industry, driving innovation in this sector.