From the Sector

Reset
8 results
(c) Novibra Boskovice s.r.o.
24.10.2019

Novibra at ShanghaiTex 2019

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

Novibra presents the latest innovations in spindle technology and energy saving measures at the forthcoming ShanghaiTex.
The energy saving spindle LENA has been designed for the highest speeds and lower energy consumption. It is the only spindle in the market with 17.5 mm wharve diameter and energy savings in the average of up to 6%.

The new generation of clamping crowns CROCOdoff and CROCOdoff Forte introduce genuine doffing without underwinding. The crowns work automatically depending on the spindle speed. The major advantages are significant reductions in maintenance costs. That is based on a lower ends down rate after doffing and minimized cleaning of the underwinding area.

Novibra’s goal is to bring beneficial and customized solutions to the customers helping them to keep their leading position in the market. Novibra is looking forward to discussing the new products that fulfil one of today’s biggest demands for energy savings and maintenance costs reduction.

More information:
Novibra ShanghaiTex
Source:

Rieter Management AG

(c) Graf + Cie AG
24.10.2019

Graf at ShanghaiTex 2019

Graf introduces at ShanghaiTex three novelties for the textile market: a new card clothing with up to 30% longer lifetime, a height adjustable comb and a helpful solution for card clothing management.
MULTISHARP, the unique wear resistant alloy for card clothings, increases the lifetime of metallic card clothings on the cylinder by up to 30%. Additionally, the work load of the maintenance team can be minimized by providing longer service cycles and less unplanned downtimes.

Graf introduces at ShanghaiTex three novelties for the textile market: a new card clothing with up to 30% longer lifetime, a height adjustable comb and a helpful solution for card clothing management.
MULTISHARP, the unique wear resistant alloy for card clothings, increases the lifetime of metallic card clothings on the cylinder by up to 30%. Additionally, the work load of the maintenance team can be minimized by providing longer service cycles and less unplanned downtimes.

The yield on raw material can be increased without compromising the quality requirements – thanks to the continuous height adjustability of the new combs series. The continuous and exact gap setting between nipper and circular comb on each individual combing head provides customers a new level on raw material utilization. Additionally, the maintenance people will appreciate the comfortable and easy installation of the circular comb.

With the card clothing management the overall investment costs can be reduced. This is based on minimizing the operational expenses including optimizing the overall equipment effectiveness. Graf’s card clothing management prolongs the lifetime of flexible flats by up to three times without comprising on the quality parameters throughout the entire life cycle.

More information:
Graf ShanghaiTex
Source:

Rieter Management AG

(c) Bräcker AG
24.10.2019

Bräcker at ShanghaiTex 2019

Bräcker presents a new traveller with up to 50% longer lifetime and shorter running-in period. This is only one highlight out of the impressing product variety.
A novelty Bräcker shows at ShanghaiTex is the new CARBO traveller for ring spinning machines. It is specially designed for man-made fiber spinners. CARBO is a new coating technology which improves the sliding properties. This results in up to 50% longer lifetime and a shorter running-in period. Recommended applications next to man-made fibers are also their blends, core yarns and all yarn counts.

Bräcker presents a new traveller with up to 50% longer lifetime and shorter running-in period. This is only one highlight out of the impressing product variety.
A novelty Bräcker shows at ShanghaiTex is the new CARBO traveller for ring spinning machines. It is specially designed for man-made fiber spinners. CARBO is a new coating technology which improves the sliding properties. This results in up to 50% longer lifetime and a shorter running-in period. Recommended applications next to man-made fibers are also their blends, core yarns and all yarn counts.

In addition, Bräcker exhibits its well-known portfolio of high-quality products which meets the continually rising demands on the textile market like higher speeds and productivity. The rings and travellers offer long service lives, lowest yarn breaks and no thermal damages when processing man-made fibers.

More information:
Bräcker ShanghaiTex
Source:

Rieter Management AG

(c) Spindelfabrik Suessen GmbH
24.10.2019

Suessen at ShanghaiTex 2019

Suessen presents the new compacting devices for high flexibility, new weighting arms and premium rotor spinning components for excellent yarn quality.
COMPACTeasy is the new mechanical compacting device available as a plugon/ plug-off unit for any ring spinning machine type and suitable for most common applications like cotton, man-made fibers and blends. COMPACTeasy is the solution in compacting without additional energy requirement.

Suessen presents the new compacting devices for high flexibility, new weighting arms and premium rotor spinning components for excellent yarn quality.
COMPACTeasy is the new mechanical compacting device available as a plugon/ plug-off unit for any ring spinning machine type and suitable for most common applications like cotton, man-made fibers and blends. COMPACTeasy is the solution in compacting without additional energy requirement.

New EliTe is a versatile compact-spinning system with new innovative components. The customers profit from higher productivity, better quality and lower operational costs. Upgrade packages and spare parts packages enable the customers to benefit also on existing installations.

The new Top Weighting Arm HP 4080 for roving frames offers a new design for easy settings and improved stability. In addition, consistent yarn quality over the lifetime is guaranteed.

More information:
Suessen ShanghaiTex
Source:

Rieter Management AG

© SSM Schärer Schweiter Mettler AG
24.10.2019

SSM at ShanghaiTex 2019

At ShanghaiTex SSM presents solutions for precision package winding and high package consistency and provides a wide range of renowned textile machines.

SSM enables yarn dyers to be successful – with the precision package winder PWX. Only a quick response to market trends in combination with high cost-efficiency enables customers to be competitive. The winder offers clear benefits to dye package winding and rewinding of filament and staple fiber yarns, with or without lubrication.

At ShanghaiTex SSM presents solutions for precision package winding and high package consistency and provides a wide range of renowned textile machines.

SSM enables yarn dyers to be successful – with the precision package winder PWX. Only a quick response to market trends in combination with high cost-efficiency enables customers to be competitive. The winder offers clear benefits to dye package winding and rewinding of filament and staple fiber yarns, with or without lubrication.

For the XENO-platform SSM presents the first and only self-regulating backpressure system in the world: preciforce™ for a guaranteed package consistency. Furthermore, the next generation of the blade winding powerblade™ will be introduced for the XENO-platform.

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019 (c) Saurer AG
FusionTwister for staple fibre yarns
26.09.2019

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.

Monforts (c) A. Monforts Textilmaschinen GmbH & Co. KG
02.09.2019

Monforts: Responding to China’s requirements in 2019

It’s well-known that the astonishing success of China’s economy over the past decade has sent wages soaring and made it difficult for the country’s textile manufacturers to find and retain trained machine operators, while operating in a highly competitive market where optimised production and full resource efficiency are of paramount importance.

It’s well-known that the astonishing success of China’s economy over the past decade has sent wages soaring and made it difficult for the country’s textile manufacturers to find and retain trained machine operators, while operating in a highly competitive market where optimised production and full resource efficiency are of paramount importance.

In direct response to this situation, A. Monforts Textilmaschinen GmbH & Co. KG has introduced a range of new Industry 4.0 technologies aimed at simplifying machine operation while providing easy access to all data and instant or remote assistance.

At the forthcoming Shanghaitex 2019 textile machinery exhibition, which takes place from November 25-28 in Shanghai, Monforts specialists will be at stand A10 in Hall W and look forward to discussing the company’s latest developments in this area with valued Chinese customers.

They include the latest Qualitex full touch panel control system, with its digital twinning capability and Smart Check and Smart Support apps, reinforced by the comprehensive Monforts Smart Sensor machine monitoring programme.

© Techtextil, Messe Frankfurt Exhibition GmbH
06.08.2018

Strong potential in Buildtech and Mobiltech sectors to be displayed at Cinte Techtextil China

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

  • FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
  • Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
  • Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
  • Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

  • Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
  • SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
  • Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
  • Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
  • Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
  • Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
  • Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.

Source:

Messe Frankfurt Exhibition GmbH