From the Sector

Reset
18 results
12.04.2023

Comeback of CIOSH trade fair in Shanghai

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

Integrating Online and Offline Platforms
CIOSH 2023 encompasses four major sectors: Safety at Work, Security at Work, Health at Work, and Emergency Rescue Management. Renowned domestic and international exhibitors, including 3M, Honeywell, Ansell, SATA, JSP, MSA, DELTAPLUS, Lakeland, Cortina, UVEX, CM Chaomei, Xing Yu Gloves, DS, East Asia Glove, Hanvo, SOMO Zhongmai Safety, SAFETY-INXS, and TELPS, will assemble on site. At the same time, CIOSH 2023 has introduced an innovative online platform - CIOSH VIRTUAL. By offering online displays, live streaming, interactive features, and real-time communications, it breaks time and space constraints, facilitating exhibitors and visitors to continue their business exchanges and cooperations beyond the physical exhibition. So far, nearly 1,300 companies have joined the CIOSH VIRTUAL, showcasing more than 3,000 products online and attracting over 70,000 views.

CIOSH Industry Technical Seminar, Sustainable Development Emerges as the Key Focus
The annual Industry Technical Seminar, held concurrently with CIOSH, serves as a platform for professionals to discuss product solutions, share industry insights, and exchange ideas on relevant policies. In 2021, China integrated climate change mitigation measures into its 14th Five-Year Plan, established a 2030 carbon peaking action plan, and proactively pursued the goal of carbon neutrality by 2060. Under the development objectives of "carbon peaking" and "carbon neutrality," the sustainable development of the personal protective equipment (PPE) industry has become the primary theme of this year's seminar. Experts from China Carbon Low-carbon Certification (Jiangsu) Co., Ltd., China Certification Centre, Inc., and SGS-CSTC Standards Technical Services Co., Ltd., will examine related policies, the effects of "carbon neutrality" on the PPE industry chain and the industries using PPE from different angles. They will also explore the future direction of PPE and offer professional guidance for the transformation of relevant enterprises.

Fall Protection Zone
Falls from height are one of the most common accidents that cause serious injury or death to workers. Effective fall protection requires not only protective equipment, but also professional instructions and training. Therefore, CIOSH set up a new Fall Protection Zone in 2021, which received unanimous acclaim. CIOSH 2023 has continued to invite SKYLOTEC, rothoblaas, JECH, Mode and NTR Safety, five companies that specialize in protection at height, to conduct on-site demonstrations on fall testing, fall protection solutions and aerial rescue, and provide visitors with the most professional fall protection guidance and training.

Occupational Health
CIOSH has always implemented the strategy of expanding the business scope in a diversified way, which devotes itself to providing innovative opportunities and new driving forces for the sustainability of the occupational safety and health industry. This year, focusing on the "occupational health" sector, the exhibition will launch an Ergonomics Zone and an Exoskeleton Technology Zone for the first time.

Photo CHIC Shanghai
13.02.2023

CHIC Shanghai postponed by three weeks to March 28-30, 2023

CHIC - China International Fashion Fair starts the new year with a new date and fresh ideas. The unrestricted entry to China is possible again and CHIC March will be postponed by three weeks to facilitate visa applications.

From March 28 to 30, 2023 around 1,600 exhibitors will meet on 117,200 sqm at CHIC at the National Exhibition & Convention Center (NECC) in Shanghai.

In 5 halls the fair presents itself in clearly structured segments with the big players and young, up-and-coming designers as well as exciting niche brands in the areas of womenswear, menswear, kidswear, denim, shoes, bags and accessories, young fashion, sportswear, designer brands and overseas brands.

CHIC - China International Fashion Fair starts the new year with a new date and fresh ideas. The unrestricted entry to China is possible again and CHIC March will be postponed by three weeks to facilitate visa applications.

From March 28 to 30, 2023 around 1,600 exhibitors will meet on 117,200 sqm at CHIC at the National Exhibition & Convention Center (NECC) in Shanghai.

In 5 halls the fair presents itself in clearly structured segments with the big players and young, up-and-coming designers as well as exciting niche brands in the areas of womenswear, menswear, kidswear, denim, shoes, bags and accessories, young fashion, sportswear, designer brands and overseas brands.

Around 120,000 trade visitors are expected at the upcoming CHIC, serving all major distribution channels in China such as large shopping malls and department stores, agents, distributors, buyers from multi-brand and concept stores, live stream providers, etc. The CHIC organizers invest in intensive visitor marketing measures. CHIC Matching, the successful networking system of CHIC, brings exhibitors and visitors together efficiently and individually. New contacts can be made and cooperation opportunities explored. Comprehensive marketing activities via all relevant channels such as the CHIC WeChat Public Account (> 200,000 subscriptions), the CNGA WeChat mini program (> 100,000 subscriptions) and TikTok ensure visibility.

New: CHIC Showroom, the innovative young showroom concept in Beijing, which is to be expanded and will enable international brands to enter the Chinese market in the medium term.

More information:
CHIC Shanghai
Source:

JANDALI

(c) ACIMIT
09.05.2022

Italian Textile Machinery (ACIMIT): Drop in orders for first quarter 2022

The orders index for textile machinery for the first quarter of 2022, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, shows a slight decrease (-4%) compared to the same period from January to March 2021. In absolute value, the index stood at 117 points (basis: 2015 = 100).

On the domestic front orders shrank by fully 22%, whereas abroad the decline was more contained (-2%). The absolute value of the index in Italy was set at 136 points. On foreign markets, the index scored a value of 114.9 points.

ACIMIT President Alessandro Zucchi commented that: “The global pandemic and Russian-Ukrainian conflict have accentuated the climate of uncertainty for the whole of the textile industry. Criticalities already present in the past year (such as a sharp rise in prices of raw materials and their scarce availability, as well as increased transport costs) are now accentuated more than ever. While orders appear to have settled on foreign markets, domestically, following a strong recovery in 2021, we now have to deal with a general negativity permeating the Italian economy.”

The orders index for textile machinery for the first quarter of 2022, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, shows a slight decrease (-4%) compared to the same period from January to March 2021. In absolute value, the index stood at 117 points (basis: 2015 = 100).

On the domestic front orders shrank by fully 22%, whereas abroad the decline was more contained (-2%). The absolute value of the index in Italy was set at 136 points. On foreign markets, the index scored a value of 114.9 points.

ACIMIT President Alessandro Zucchi commented that: “The global pandemic and Russian-Ukrainian conflict have accentuated the climate of uncertainty for the whole of the textile industry. Criticalities already present in the past year (such as a sharp rise in prices of raw materials and their scarce availability, as well as increased transport costs) are now accentuated more than ever. While orders appear to have settled on foreign markets, domestically, following a strong recovery in 2021, we now have to deal with a general negativity permeating the Italian economy.”

The ongoing conflict in Ukraine, together with successive pandemic lockdowns in the main market for textile machinery manufacturers, namely China, have undermined the confidence of Italian companies in the sector. “I believe 2022 will be a transition year for the industry, as we await a calming international economic scenario. In the meantime,” adds Zucchi, “our association continues to work to strengthen the positioning of Italy’s textile machinery industry worldwide through promotional initiatives in collaboration with Ministry of Foreign Affairs and International Cooperation and Italian Trade Agency.”

The latest of these initiatives was carried out at the end of April, with the opening of an Italian technology training center for textile machinery in Mongolia, a Country that ranks among the world’s leading producers of raw cashmere. ACIMIT’s president concludes that, “With the training center starting its operations, our sector is laying the foundations for further business opportunities in an emerging market. I’m certain the initiative will bear a return in terms of image not only for individual Italian companies who are participating by supplying machinery, but on the entire Italian textile machinery sector as a whole.”

26.01.2022

World Pultrusion Conference - Postponed

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) Koelnmesse / imm cologne
13.12.2021

imm cologne: Restart postponed to 2023

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

The VDM, as the industry sponsor of the event, and against the background of the current pandemic situation, sees the economic success of the event and thus the successful restart of imm cologne in January as extremely endangered. "Following consultation with numerous exhibitors, industry representatives and trading partners, there is either no question of participation on the part of German exhibitors or exhibitors from the German-speaking region, or this is very much in doubt", according to Jan Kurth, CEO of the VDM.  Similar feedback also came from many European countries.

"The current special basic conditions in the interior design industry make the practicability of imm cologne almost impossible", according to Oliver Frese. "We didn't make this very bitter decision easy for ourselves, but consider it to be our obligation to take this step now in close consultation with the industry. In this way we provide clarity and planning security in the interests of our exhibitors. In our shared perspective, an imm cologne with its claim as a leading trade fair for the interior design industry is not realisable in the current situation", the COO continues. "We are currently working actively on options for also still being able to offer exhibitors of imm cologne an attractive trade fair presence at the international level. Here, both spoga+gafa and ORGATEC present excellent alternatives in the interior design portfolio of Koelnmesse".

The cancellation is restricted to imm cologne and expressly does not include other B2B events planned for spring 2022 in Cologne. In autumn, the Cologne art fairs and the nutrition fair Anuga, among others, demonstrated that trade fairs are also once again possible at the international level and can be carried out safely for everyone. It is currently quite clear how differently individual industries are reacting to the present situation. "We have determined a heterogeneous estimation among the exhibiting companies in the face of the enduring pandemic situation in Germany", according to Oliver Frese, COO of Koelnmesse. The assessments vary in degree specific to different industries, "sometimes with a greater impact on the respective trade fair and sometimes hardly palpable", the COO continues. "In the interests of cooperation in a spirit of trust, we are of course communicating closely with our industries and customers, in order to be able to reach just these kinds of industry-specific decisions," according to Frese.

The hygiene and safety concept of Koelnmesse, which remains entirely in keeping with the decisions of the Minister-President Conference and the Corona Protection Ordinance of NRW, stands for safe processes.

A positive picture was still taking shape for imm cologne as a whole with the end of the term for cancellation without penalties in mid-October: with 600 exhibitors from more than 50 countries, the event would still have been the largest and most relevant forum for the interiors industry, hosted in Europe’s biggest furniture market, even in this smaller form in terms of numbers.

The professional exchange and the networking between internationally active companies and highly qualified trade visitors provide the basis at every imm cologne for future-oriented innovations and the development of new business models. In this way, imm cologne ensures important business impulses for the industry. Koelnmesse, together with the VDM and the exhibiting industry, will therefore do everything possible to get a powerful and innovative imm cologne 2023 on its feet.        

Source:

Koelnmesse / imm cologne

16th World Pultrusion Conference - CALL FOR PAPERS
WPC2022
22.09.2021

16th World Pultrusion Conference - CALL FOR PAPERS

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The presentation language will be English. Deadline for paper submission (title, short abstract, speaker name and address) until 15th October 2021 to info@pultruders.com.
 
The European Pultrusion Technology Association was created in 1989 by a group of leading European pultruders with the mission of supporting the growth of the pultrusion industry by maximising external communication efforts and encouraging knowledge sharing between members. Since 2006, the association has existed under the umbrella of the AVK – Federation of Reinforced Plastics in Frankfurt, Germany. Membership of EPTA is open to all companies and individuals worldwide wishing to further the application of pultruded profiles. For further information visit http://www.pultruders.com.

21.07.2021

Green fashion community to meet at INNATEX

The 48th INNATEX is opening its doors at the Messecenter Rhein-Main in Hofheim-Wallau from 31 July to 2 August 2021. More than 200 labels are poised to appear at the international trade fair for sustainable textiles. Following a long string of industry gatherings being cancelled due to COVID-19, the summer trade fair is a first opportunity for the sector to get together. All visitors are required to register digitally  in advance of the fair.

The pandemic has presented an opportunity to launch new projects. They include a special zone created in collaboration with GIZ GmbH, the German society for international development, which will shine a light on African designers. 13 labels from Ethiopia, Kenya, Rwanda, South Africa, Tanzania, and Uganda will present their ideas for sustainable textiles and fashion products.

The starting point for the special area is a virtual trade fair, commissioned by the Federal Ministry for Economic Cooperation and Development. GIZ GmbH has realised the joint project in cooperation with several partners; its physical extension can be visited at INNATEX.

The 48th INNATEX is opening its doors at the Messecenter Rhein-Main in Hofheim-Wallau from 31 July to 2 August 2021. More than 200 labels are poised to appear at the international trade fair for sustainable textiles. Following a long string of industry gatherings being cancelled due to COVID-19, the summer trade fair is a first opportunity for the sector to get together. All visitors are required to register digitally  in advance of the fair.

The pandemic has presented an opportunity to launch new projects. They include a special zone created in collaboration with GIZ GmbH, the German society for international development, which will shine a light on African designers. 13 labels from Ethiopia, Kenya, Rwanda, South Africa, Tanzania, and Uganda will present their ideas for sustainable textiles and fashion products.

The starting point for the special area is a virtual trade fair, commissioned by the Federal Ministry for Economic Cooperation and Development. GIZ GmbH has realised the joint project in cooperation with several partners; its physical extension can be visited at INNATEX.

Exhibitors include well-known pioneers and young newcomers
The IVN (International Association of Natural Textile Industry), which sponsors INNATEX, is staging its own pop-up showroom. In doing so, the association is creating its own curated space, showcasing the diversity and special features of its members. The future objective is to expand this space with the organiser to create a growing Concept Area that introduces visitors to different ways of presenting green fashion.

Besides the IVN, the Global Organic Textile Standard, the Green Button and Fairtrade are among the other standardisation bodies represented at the fair. In addition, a special exhibition entitled “Fashion in the Hood” (Fashion im Kiez) and delivered by the young interest group “Frankfurt Fashion Movement”, helps visitors join the dots in the fashion industry. Among the labels exhibiting at the fair for the first time are Active Wear by Klitmøller Collective from Denmark, Organic Fashion by Bibico from the UK and Italian sneaker brand ACBC.

More information:
INNATEX
Source:

UBERMUT GbR für INNATEX

27.05.2021

PERFORMANCE DAYS: Successful Digital Fair Week

The PERFORMANCE DAYS summer edition took place as a Digital Fair Week from May 17 to 21, 2021. By extending the event to an entire week of the fair, the PERFORMANCE DAYS team, in cooperation with the Functional Fabric Fair by PERFORMANCE DAYS, was able to provide even more opportunities for intensive networking and interactive exchange for industry insiders to catch up on the latest innovations and participate in exciting expert talks, supplier workshops and panel discussions.

Informative, innovative and international: new sourcing platform THE LOOP
The Digital Fair Week was introduced for the first time at the summer edition as part of PERFORMANCE DAYS LOOPS. The sourcing platform was launched in the first half of 2021 together with US Partner Functional Fabric Fair by PERFORMANCE DAYS. With much success, as proven by the great enthusiasm shown by exhibitors, trade fair visitors and fabric manufacturers. The MARKETPLACE area, which showcased some 10.000 products and around 400 curated, sustainable fabrics and accessories from more than 170 international exhibitors, enjoyed particular popularity as part of the Digital Fair.

The PERFORMANCE DAYS summer edition took place as a Digital Fair Week from May 17 to 21, 2021. By extending the event to an entire week of the fair, the PERFORMANCE DAYS team, in cooperation with the Functional Fabric Fair by PERFORMANCE DAYS, was able to provide even more opportunities for intensive networking and interactive exchange for industry insiders to catch up on the latest innovations and participate in exciting expert talks, supplier workshops and panel discussions.

Informative, innovative and international: new sourcing platform THE LOOP
The Digital Fair Week was introduced for the first time at the summer edition as part of PERFORMANCE DAYS LOOPS. The sourcing platform was launched in the first half of 2021 together with US Partner Functional Fabric Fair by PERFORMANCE DAYS. With much success, as proven by the great enthusiasm shown by exhibitors, trade fair visitors and fabric manufacturers. The MARKETPLACE area, which showcased some 10.000 products and around 400 curated, sustainable fabrics and accessories from more than 170 international exhibitors, enjoyed particular popularity as part of the Digital Fair.

Another extremely popular and particularly well-attended attraction was the 3D FORUM, which tested hand-selected fabrics for their material properties as part of the digital fair week, to be visualized ultimately as a 3D scan.
Also for the spring/summer 2023 season, the jury presented two awards for outstanding fabrics – so in addition to the presentation of the PERFORMANCE AWARD, won by Trenchant Textiles, the ECO PERFORMANCE AWARD was presented to the winner, Utenos Trikotazas.

Professional, versatile and informative: Program with Expert Talks
A total of 17 live talks from 30+ speakers followed by a question-and-answer session, under the guidance of moderator and freelancer Astrid Schlüchter, formed the basis of the digital fair supporting program from May 17 to 19. All talks, webinars and panel discussions are available on demand via THE LOOP platform.

The PERFORMANCE DAYS Team has once again succeeded in providing the industry with an almost real trade fair experience despite being held digitally. Via the Digital Fair Platform, which was activated explicitly for the trade fair week, trade fair visitors can enter into interactive exchange, including matchmaking and networking activities.

The premiere of the Functional Textiles Shanghai by PERFORMANCE DAYS fair takes place in Shanghai in September 28-29 as well as in Portland in October 27-28, 2021, with the planned hybrid event in Munich scheduled for December 1 and 2, 2021.

Source:

PERFORMANCE DAYS

AMAC kooperiert mit ITA (Institut für Textiltechnik der RWTH Aachen und deren ITA GmbH) für die weitere Geschäftsentwicklung im Bereich Composites  © AMAC
fltr: Markus Beckmann, Prof. Thomas Gries, Dr. Michael Effing, Dr. Christoph Greb
19.04.2021

AMAC cooperates with ITA

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

05.03.2021

ITM Exhibition postponed to 14-18 June 2022

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

HeiQu: Carlo Centonze and his daughter Anna (c) HeiQ
Carlo Centonze and his daughter Anna
20.11.2020

HeiQ Viroblock wins Swiss Technology Award 2020

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The technology that makes HeiQ Viroblock a unique innovation
What exemplifies HeiQ Viroblock is its ability to turn any fabric antiviral. It’s among the first textile technologies in the world to be proven effective against SARS-CoV-2 (COVID-19). HeiQ Viroblock consists of a combination of HeiQ’s patent-pending vesicle and silver technologies. The two mechanisms of attack result in an over 99.9% destruction of viruses in 5 minutes that is unrivaled in the industry. HeiQ Viroblock is a unique patent-pending formulation of 72% bio-based ingredients, made with 100% cosmetic-grade materials from the International Nomenclature of Cosmetic Ingredients list. HeiQ Viroblock is also a shining example of Swiss cooperation between academics and the industry. The silver technology was developed at ETHZ (Eidgenössische Technische Hochschule Zürich), the vesicle technology at EPFL (École polytechnique fédérale de Lausanne), and the production was scaled up at FHNW (Fachhochschule Nordwestschweiz).

HeiQ Viroblock has demonstrated unparalleled speed from laboratory to consumer
HeiQ launched the new antiviral textile technology HeiQ Viroblock on March 16, 2020 – two hours after Switzerland declared a state of emergency. This was made possible with the indispensable support of Swiss research Partner FHNW and the EPFL which helped accelerate product validation. The fast scale-up of production was enabled by the FHNW School of Life Sciences with their new Process Technology Center (PTC) by special permit. With its agile operations and global footprint, HeiQ also brought HeiQ Viroblock face masks and other PPE (personal protection equipment) to different corners of the world where are needed. Now, Swiss consumers can also acquire HeiQ Viroblock enhanced face masks online.

Reacting to the news of HeiQ Viroblock winning this year’s Swiss Tech Award, Co-founder and CEO Carlo Centonze says: “I am both amazed and honored that HeiQ has won this award a second time in just ten years, and from among some incredible tech innovation finalists. It confirms our resolve to push the boundaries and push innovations to help the world with its most pressing and imminent problems. This award is recognition for our company and team that have spared no efforts to develop and launch HeiQ Viroblock at such speed and make a valuable contribution to the global pandemic efforts. We remain true to our mission: enhancing the everyday lives of people with smart and efficient textile effects.”

 

Source:

HeiQ

Lenzing reports improved results in the third quarter and remains strategically on course (c) Lenzing
Lenzing reports improved results in the third quarter and remains strategically on course
04.11.2020

Lenzing reports improved results in the third quarter and remains strategically on course

  • Significant improvement in the third quarter after COVID-19-related slump on the fiber market
  • Measures for structural earnings improvement with positive impact
  • Strategic investment projects remain on track
  • Hygiene Austria joint venture: Successful growth and continued focus on certified protective masks
  • Lenzing wins the Austrian State Prize for Innovation with LENZING™ Web Technology

Lenzing – In the first three quarters of 2020, the Lenzing Group successfully responded to the extremely difficult market environment of increased pressure on prices and volume due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The cooperation with partners along the value chains was intensified and Lenzing was agile and flexible in adjusting production volume to demand.

  • Significant improvement in the third quarter after COVID-19-related slump on the fiber market
  • Measures for structural earnings improvement with positive impact
  • Strategic investment projects remain on track
  • Hygiene Austria joint venture: Successful growth and continued focus on certified protective masks
  • Lenzing wins the Austrian State Prize for Innovation with LENZING™ Web Technology

Lenzing – In the first three quarters of 2020, the Lenzing Group successfully responded to the extremely difficult market environment of increased pressure on prices and volume due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The cooperation with partners along the value chains was intensified and Lenzing was agile and flexible in adjusting production volume to demand. In addition, Lenzing also intensified measures for structural earnings improvement to mitigate the effect of the pressure on fiber prices and demand for fibers, and reduced its operating costs significantly as a result.

Please read the attached document for more information

Source:

Lenzing Aktiengesellschaft

Reach Group: Composites China Trade Show (c) REACH Group
10.09.2020

AMAC/Germany and REACH Group/China: first life business activity since Covid-19 at the Composites China Trade Show in Shanghai

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

Daniel He describes the situation: „The Chinese market is picking up again; a price increase of 7% for glass fibers was announced right before the China Composites Show, on August 25th 2020, which was even leading to a temporary material shortage. Today, the most booming industries in China are wind energy, building and infrastructure and innovation for electric cars. Unlike the rest of the world, where the aircraft industry undergoes a deep decline, in China it takes up by 50 %, which is very promising. Furthermore, we expect half a year for a full recovery of the industry, while the China growth of 2020 is still expected to be between 2 and 4 %.“

Michael Effing replied: “Enabling the composites business between China and Europe is the aim of our cooperation with Reach and with our customers, which are active in digital automatization, testing equipment or cost optimization software. We are very happy to have been present in China through our representant Reach and are looking forward to bridge and overcome the Covid-19-crisis with our upcoming event in Germany, the Composites for Europe in Stuttgart in November and hope to be back to full global business speed at the JEC in Paris in 2021.“

Source:

AMAC GmbH

First Swiss “Community Mask” with TESTEX label by Schoeller Textil AG and Forster Rohner AG Photo: Schoeller Textil AG
First Swiss “Community Mask” with TESTEX label by Schoeller Textil AG and Forster Rohner AG
21.08.2020

First Swiss “Community Mask” with TESTEX label by Schoeller Textil AG and Forster Rohner AG

With immediate effect, the first fabric mask with the official “TESTEX Community Mask” test label is available from the two Swiss textile firms, Schoeller Textil AG and Forster Rohner AG. Since May, the companies have been able to offer their masks with official EMPA recommendation. The sustainable and economical quality products consist primarily of recycled performance fabric which can be recycled once again at the end of its service life.

Swiss cooperation
With the product from the two companies based in the east of Switzerland, Schoeller Textil AG and Forster Rohner AG, the Swiss market now boasts the first textile mask featuring the label “TESTEX Community Mask”. Together with the EMPA, TESTEX has developed a testing procedure which analyses textile masks with regard to their filter function, spray resistance, comfort of wear, reusability and additionally skin-friendliness of the textiles. By now, numerous Swiss and international consumers, as well as the employees of major companies (e.g. transport companies) have satisfied themselves of the suitability of the Swiss Community Masks for everyday use.

With immediate effect, the first fabric mask with the official “TESTEX Community Mask” test label is available from the two Swiss textile firms, Schoeller Textil AG and Forster Rohner AG. Since May, the companies have been able to offer their masks with official EMPA recommendation. The sustainable and economical quality products consist primarily of recycled performance fabric which can be recycled once again at the end of its service life.

Swiss cooperation
With the product from the two companies based in the east of Switzerland, Schoeller Textil AG and Forster Rohner AG, the Swiss market now boasts the first textile mask featuring the label “TESTEX Community Mask”. Together with the EMPA, TESTEX has developed a testing procedure which analyses textile masks with regard to their filter function, spray resistance, comfort of wear, reusability and additionally skin-friendliness of the textiles. By now, numerous Swiss and international consumers, as well as the employees of major companies (e.g. transport companies) have satisfied themselves of the suitability of the Swiss Community Masks for everyday use.

Recyclable fabric made with 60 % recycled fibres
The high-quality fabric components in the mask were developed by the innovative Rheintal-based company Schoeller Textil AG. The two-layer polyester fabric is hydrophilic (having an affinity to water) on the outside and hydrophobic (water-repelling) on the outside and furthermore features an antibacterial finish. Thanks to the cotton-like feel, the fabric offers pleasant wearing comfort. The sustainable fabric consists of 60 % recycled fibres. Within the framework of the wear2wear recycling cooperation (www.wear2wear.org), the masks can be recycled once again when they reach the end of their life cycle.

The reusable mask is made up by Forster Rohner AG in St. Gallen and in its European subsidiaries. It impresses with optimum fit and tested skin tolerance. All components of
the mask comply with the OEKO-TEX® Standard 100. The testing process screens for numerous controlled and non-controlled substances. Masks with the OEKO-TEX® Standard 100 label are safe to wear. Forster Rohner also added a fashion component to the technicallyinnovative mask. The subsidiary, Jakob Schlaepfer AG, created a special print for the mask of the kind otherwise only developed for famous couture and prêt-à-porter fashion labels around the world. In addition to white and plain-coloured masks, a limited edition of available print designs emerges, or specific colours or even individual print designs are created for major customers.

Lenzing Aktiengesellschaft (c) Lenzing Aktiengesellschaft
Lenzing Aktiengesellschaft
05.08.2020

COVID-19 impacts revenue and earnings of the Lenzing Group in the first half of 2020

  • Fiber prices and demand under pressure
  • Measures to protect employees, customers and suppliers and to keep plants operational implemented successfully
  • Joint venture Hygiene Austria established for industrial production of protective masks in the fight against the COVID-19 pandemic – new distribution channel via shop.hygiene-austria.at
  • Strategic investment projects progress according to plan – financing agreements for construction of pulp plant in Brazil concluded as planned
  • Revenue and operating result in the remaining quarters of 2020 expected to exceed that of the second quarter

Lenzing – In the first half of 2020, the Lenzing Group faced a historically difficult market environment with increased pressure on prices and volumes resulting from the COVID-19 crisis. To counteract that, Lenzing intensified its cooperation with partners along the value chains and adjusted its production volumes and sales prices to market reality.

  • Fiber prices and demand under pressure
  • Measures to protect employees, customers and suppliers and to keep plants operational implemented successfully
  • Joint venture Hygiene Austria established for industrial production of protective masks in the fight against the COVID-19 pandemic – new distribution channel via shop.hygiene-austria.at
  • Strategic investment projects progress according to plan – financing agreements for construction of pulp plant in Brazil concluded as planned
  • Revenue and operating result in the remaining quarters of 2020 expected to exceed that of the second quarter

Lenzing – In the first half of 2020, the Lenzing Group faced a historically difficult market environment with increased pressure on prices and volumes resulting from the COVID-19 crisis. To counteract that, Lenzing intensified its cooperation with partners along the value chains and adjusted its production volumes and sales prices to market reality. The disciplined implementation of the sCore TEN corporate strategy and the focus on specialty fibers continued to have a positive impact.*

*Please read the attached document for more information

More information:
Lenzing AG Covid-19 Coronakrise
Source:

Lenzing Aktiengesellschaft

ITM 2021
The ITM and Hightex Exhibitions are postponed
22.05.2020

ITM and HIGHTEX Exhibitions Postponed to 22-26 June 2021

ITM International Textile Machinery Exhibition and HIGHTEX International Technical Textiles and Nonwoven Exhibition, held every two years in partnership with Tüyap Tüm Fuarcılık Inc. and Teknik Fuarcılık Inc., and in cooperation with TEMSAD, were planned to be held between June 2-6 this year. However, as effects of Corona virus (Covid-19) continue to increasingly impact all the world, ITM and HIGHTEX exhibitions had been postponed to 14-18 July 2020, but it has been announced that the events have been rescheduled to 22-26 June 2021. 

ITM International Textile Machinery Exhibition and HIGHTEX International Technical Textiles and Nonwoven Exhibition, held every two years in partnership with Tüyap Tüm Fuarcılık Inc. and Teknik Fuarcılık Inc., and in cooperation with TEMSAD, were planned to be held between June 2-6 this year. However, as effects of Corona virus (Covid-19) continue to increasingly impact all the world, ITM and HIGHTEX exhibitions had been postponed to 14-18 July 2020, but it has been announced that the events have been rescheduled to 22-26 June 2021. 

Exhibitions Preparation Continue
Preparations for ITM and HIGHTEX 2021 Exhibitions continue at full steam to bring together hundreds of manufacturers and global investors who develop leading technologies in their fields. The latest technologies and new products to be displayed at ITM and HIGHTEX Exhibitions, which will open their doors in Istanbul Tuyap Fair Convention and Congress Center next year, will meet with textile investors from all over the world.
 
ITM 2018, where textile machinery leaders exhibited their latest technological products, turned into a trade show with global launches and hosted one of the largest meetings in the world, with 1150 exhibitors from 64 countries and 58.942 visitors (14.248 of them foreigners) from 94 countries.

Source:

Teknik Fuarcılık INC

06.05.2020

CHT teams up with HeiQ in fight against COVID-19

The corona pandemic continues to put a strain on health systems around the globe. Many places lack effective textile protective kit among others for their medical personnel. HeiQ, a Swiss specialty chemicals company, has developed antiviral and antibacterial protective kit that is quickly effective against Coronaviruses (229E), as confirmed in wide-ranging studies. In cooperation with HeiQ, the CHT Group is supplying this technology to the market to help decrease the global shortage in protective wear.

A wide number of studies have proven that viruses and bacteria can remain active on textile surfaces for a longer period. The SARS-COV-2 virus, which causes the COVID-19 disease, can stay active on a textile for up to two days and therefore be infectious. Shortages in textile protective kit create a high risk for medical personnel who are in contact with COVID-19 patients: often, doctors and nurses cannot change their protective masks and clothing as frequently as would be necessary in order to adhere to hygiene rules and to prevent the spreading of the virus.

The corona pandemic continues to put a strain on health systems around the globe. Many places lack effective textile protective kit among others for their medical personnel. HeiQ, a Swiss specialty chemicals company, has developed antiviral and antibacterial protective kit that is quickly effective against Coronaviruses (229E), as confirmed in wide-ranging studies. In cooperation with HeiQ, the CHT Group is supplying this technology to the market to help decrease the global shortage in protective wear.

A wide number of studies have proven that viruses and bacteria can remain active on textile surfaces for a longer period. The SARS-COV-2 virus, which causes the COVID-19 disease, can stay active on a textile for up to two days and therefore be infectious. Shortages in textile protective kit create a high risk for medical personnel who are in contact with COVID-19 patients: often, doctors and nurses cannot change their protective masks and clothing as frequently as would be necessary in order to adhere to hygiene rules and to prevent the spreading of the virus.

The HeiQ Viroblock NPJ03 that has been developed by HeiQ is a new technology that is also effective against Coronaviruses (229E) thanks to its antibacterial and antiviral properties. Comprehensive studies have demonstrated the kit‘s effectiveness. A combination of silver salts with a vesicle technology deactivates bacteria and viruses on textile surfaces within a few minutes and renders the bacteria and viruses harmless. Textiles equipped in this way reduce the rate of infection by 99.99%, which stops the transmission and the spread of bacteria and viruses through textiles.

Viroblock can be used on all types of fibers – not only for protective kit and masks, but also for work clothing, bed linen, towels and home textiles. The kit is wash-resistant and still highly effective after 30 standard wash processes.

More information:
HeiQ CHT Group corona virus
Source:

CHT Gruppe

Devan (c) Devan
25.03.2020

Devan offers antiviral solutions for textiles' professional workers

Textile innovator and specialty chemical producer Devan answers questions regarding anti-viral textile finish solutions following the growing spread of the COVID-19 outbreak.

Over the past few weeks, Devan has received a lot of questions regarding an antiviral solution for textiles against Sars-COV-2, the virus that causes COVID-19. “Not a big surprise since we put BI-OME AV forward 3 years ago. Testing has been done in cooperation with Institut Pasteur de Lille”, says Devan CEO Sven Ghyselinck. Devan studied enveloped viruses (e.g. H1N1, Corona-types, etc.) as well as naked viruses (e.g. Rotavirus). For both virus families, BI-OME AV showed strong to excellent activity in wet state.

Textile innovator and specialty chemical producer Devan answers questions regarding anti-viral textile finish solutions following the growing spread of the COVID-19 outbreak.

Over the past few weeks, Devan has received a lot of questions regarding an antiviral solution for textiles against Sars-COV-2, the virus that causes COVID-19. “Not a big surprise since we put BI-OME AV forward 3 years ago. Testing has been done in cooperation with Institut Pasteur de Lille”, says Devan CEO Sven Ghyselinck. Devan studied enveloped viruses (e.g. H1N1, Corona-types, etc.) as well as naked viruses (e.g. Rotavirus). For both virus families, BI-OME AV showed strong to excellent activity in wet state.

In the first instance, the company wants to focus on professionals who need to stay working such as policemen, logistics workers, shop employees, day-care workers, … A common complication of respiratory viral disease can be a secondary bacterial infection. Professionals could be helped with either an anti-bacterial on their facemask to reduce the chance for these secondary bacterial infections, for better hygiene and less odor build-up. On workwear, a combination of a virus spread reducing and antibacterial solution could help as these garments are typically used during long hours, are non-disposable and most likely will be washed at home.

Devan has solutions which withstand washing while keeping its performance. BI-OME as a liquid product is EU BPR, Turkish BPR and US EPA registered. Depending on the rash region, commercialising treated articles be subject to additional local registration procedures.

More information:
Devan Coronavirus
Source:

Devan