From the Sector

The Biden administration’s Section 301 penalty tariffs on finished textiles and apparel counteract China’s unfair trade advantages and give U.S. manufactures a chance to compete, two key American textile manufacturing groups told the Biden administration. Removing tariffs, the associations said, would reward China, put U.S. manufacturers at a competitive disadvantage and do nothing to reduce inflation.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations, representing the entirety of the U.S. textile production chain, expressed strong support for the continuation of current Section 301 penalty tariffs on finished textiles and apparel imports from China and outlined the effectiveness of U.S. tariff actions.

“In some cases, such as on finished apparel, the tariffs have worked to partially offset and counteract China’s unfair trade advantages,” the groups said. “The tariffs on finished textile and apparel items are giving U.S. manufacturers the chance to compete, and we are seeing encouraging investment and growth in moving some production and souring from China back to the Western Hemisphere.”

“The CAFTA-DR [Dominican Republic-Central America Free Trade Agreement] region has seen more than $1 billion in new textile and apparel investment this year, for example, which is historic and due to the textile and apparel rules negotiated under the agreement and sourcing shifts from China,” they added. “This investment and growing U.S. imports from the Western Hemisphere is attributable in part to the 301 tariffs on finished apparel.  The tariffs on finished items in our sector are broadly supported by textile/apparel producers in the hemispheric co-production chain, and it is essential that they remain in place, absent China reforming its practices.”

The submission was filed by the National Council of Textile Organizations (NCTO) and the U.S. Industrial and Narrow Fabrics Institute (USINFI), a division of the Advanced Textiles Association (AFA).

The groups have long advocated for a fair, transparent process to remove tariffs on textile machinery, certain chemicals and dyes and limited textile inputs that cannot be sourced domestically to help U.S. manufacturers compete against China.

They also stressed that lifting the tariffs on finished textiles and apparel products from China “will solidify their global dominance in this sector for generations to come and reward their abusive behaviors, exacerbate the migration crisis, hurt domestic manufacturers and workers, undermine our ability to recalibrate essential PPE supply chains, and blunt the positive supply chains shifts and investments in the Western Hemisphere that are happening.” They added it would “do nothing to solve the inflation crisis facing U.S. consumers and manufacturers right now.”

See the full submission here.

Art meets sustainable fashion in the third edition of the project "CirculART", the initiative that sees companies, artists and fashion designers working together with Cittadellarte - Fondazione Pistoletto, showing how new balanced forms of production, design and sharing can be explored through a careful choice of materials and of sustainable supply chains. Three key concepts underpin the circularity of sustainable fashion and therefore this project: Reduce - reducing the consumption of raw materials, Reuse - reuse of raw materials, Recycling - regeneration.

The project CirculART is conceived and developed in collaboration between Fashion B.E.S.T. and UNIDEE Residency Programs, and led by the Foundation's team of curators.

Fashion B.E.S.T. - Better Ethical Sustainable Think-Tank, Cittadellarte - Fondazione Pistoletto’ sustainable fashion office, was created by artist Michelangelo Pistoletto and Franca Sozzani. Since 2009, B.E.S.T. has been working on the development of sustainability in the textile sector, to lead to a contamination between art, which assumes social responsibility, and the world of fashion, which is looking to define a new ethical and sustainable model.

CirculART proposes a new link between fashion and art, engaging both in a conscious and innovative combination of sustainability, sensitivity, beauty and union. The project links territory and production factories, bringing together actors from the different sectors making up the textile supply chain that work on the basis of a circular economy with companies that have chosen to embrace the ideal of sustainability and develop an innovative business model.

The protagonists of this year’s edition are two international artists and two international fashion designers, selected through an open call launched by Cittadellarte: Augustina Bottoni, Lucia Chain, Huge Sillytoe and Rebecca Sforzani, young talents called upon to create a work with fabrics produced by partner companies, focusing on dialogue and on the enhancement of the textile industry production chain.

In early 2023, the programme will give the four selected artists the opportunity to visit and work actively with the partner companies that have joined the initiative.
These are: Achille Pinto S.p.a, manufacturer of textiles and textile accessories for the main international fashion brands; Albini Group, Europe's largest manufacturer of cotton fabrics for shirts; Erica Industria Tessile, a leading company in the creation of textile prints, original and customised designs; Filatura Astro, eco-sustainable regenerated yarns; G2B S.r.l., a chemical and environmental analysis laboratory working with vertical cultivation from which indigo is obtained; Lampo by Ditta Giovanni Lanfranchi S.p.A., leader in the creation and production of zips for fashion; Lanificio Fratelli Cerruti, a Biella-based weaver for haute couture; Lenzing, world leader in the production of fabrics made from fibres derived from renewable wood raw material; Milior, a producer of high quality fabrics; Officina +39 – Chemistry plus creativity, a chemical company with thirty years' experience dedicated to research and chemical application in textiles; Tessuti di Sondrio, a factory inspired by the century-old local textile tradition of processing cotton, linen, hemp and wool; Tintoria Emiliana, garment-dyed production and sustainable practices; Zegna Baruffa Lane Borgosesia, a manufacturer of 100% Made in Italy fine combed and carded yarns.

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Nine designers were challenged to create fashion capsules in eight weeks utilizing the latest technology innovations from the three alliance partners – combining digital product creation, web3-based design, digital printing, immersive circular design, 3D rendering and avatar development. All collections are on display exclusively at Berlin Fashion Week from Wednesday, January 18 to Friday, January 20 at Bikini Berlin.
 
The challenge follows standing room only Kornit Fashion Week events across the globe, displaying how on-demand, digital production creates a fashion world of nearly endless creativity. Hosted at the Impact Hub Berlin, the VORN Academy Program offered creators access to a holistic technology toolset - including the advanced Kornit Presto MAX single-step solution for direct-to-fabric sustainable printing. Some of the prominent designers taking part include costume and fashion designer Alexis Mersmann, Judith Bondy, AR and NFT artist Ann-Britt Dittmar, Berlin-based director Tanja Bombach, Nina Jurcic, Olga Boncheva, digital artist, and fashion designer Schirin Negahbani, Johann Erhardt, and Israeli designer Idan Yoav.
 
"This collaboration across four industry leaders is so unique because the result is a sum so much greater than each of its individual parts. It's a true 'alliance of the willing' that opens doors to 'phygital' collections built at the intersection of digital fashion, 3D design, and on-demand production," said Omer Kulka, Chief Innovation Officer at Kornit Digital. "We're honored to team with VORN – The Berlin Fashion Hub, Zalando, and Unity during Berlin Fashion Week to demonstrate what's possible as the physical and virtual fashion worlds come together."
 
"When we launched the Berlin Fashion Hub, our intent was to create a B2B environment to spark unmatched fashion and sustainability innovations. As Berlin is one of the world's most important fashion and textile centers, there is no better place to demonstrate economically succesful circularity in the fashion industry," said Professor Marte Hentschel, Co-Founder at VORN – The Berlin Fashion Hub. "Together, we're changing fashion to drive sustainability and harness the creative power of both the physical and virtual. We're proud of what's been accomplished in conjunction with an incredible group of designers, creators, and partners."

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

As pioneer of seam-free WHOLEGARMENT® knitting, SHIMA SEIKI has been setting the standard almost exclusively with nearly 30 years of experience in complete garment technology. Now that benchmark has been raised once again with its new SWG-XR® flagship WHOLEGARMENT® knitting machine. SWG-XR® features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle®. SWG-XR® features a renewed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series. SWG-XR® sets new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting.

A new proposal in WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 WHOLEGARMENT® knitting machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in ultrafine gauge. N.SVR®183 is equipped with the R2CARRIAGE® system and a compact, lightweight carriage for even higher productivity. Shown in 21G at Pitti Filati 92, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

Effective March 1st, Ib Jensen takes over from Jan Secher as Chief Executive Officer of Perstorp Group, a specialty chemicals company headquartered in Malmö, Sweden and since 2022 part of PETRONAS Chemicals Group Berhad (PCG).

Ib Jensen is a highly respected senior industry executive with a long career as CFO and extensive experience from M&A and integration of acquired companies, something that will be required in the next phase for Perstorp.

After more than 9 successful years as the CEO of Perstorp Group, Jan Secher has decided to step down. This decision is based on a personal direction set more than a year ago, prior to the acquisition by PCG, allowing for a full search process to be conducted for his replacement. Ib Jensen has been CFO of Perstorp for the past year and was considered the most qualified candidate based on his knowledge of the company, long term experience of the specialty chemicals industry and high level of appreciation in both Perstorp as well as in PCG. Previous experience include CFO and executive roles within Finance and IT at companies such as Arxada, Lonza, Syngenta, Danisco and LEGO.

Jan Secher remains in the CEO role until March 1st and will thereafter serve as an advisor to the new CEO and the Chairman, focusing on strategy and transferring external relationships. Monica Jönsson, currently deputy CFO, will take on the role as CFO when Ib Jensen assumes the position as CEO. PCG is fully committed to the Executive Leadership Team of Perstorp and expects the team to continue the successful integration work as well as dealing with the volatile global macro situation.

Fibre Extrusion Technology Limited (FET) of Leeds, England, a supplier of laboratory and pilot melt spinning systems, is celebrating a record breaking year of sales and product innovation. “Sales revenue for 2022 has easily beaten our previous high” said FET Managing Director, Richard Slack “and the research projects we have collaborated in have become increasingly challenging in terms of technical specification.”

Prestigious new projects during 2022 included a multifilament melt spinning line for Senbis Polymer Innovations, Netherlands enabling the development of textile fibres from recycled polymers or biopolymers; a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research in collaboration with the renowned Henry Royce Institute; and a FET-103 Monofilament line for RHEON LABS of London to help develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. The latter two of these examples were aided by significant UK grants to develop advanced materials.

FET is now looking forward to 2023 with a record order book. The company’s newly opened Fibre Development Centre features over £1.5 million investment in customer laboratory systems that will further enable fibre trials and product R&D. Three new polymer types were developed with clients in 2022 and several more are lined up in 2023, which is expected to bring the total of different polymer types to more than 40 in multifilament, monofilament and nonwoven formats.

FET will be exhibiting at two major exhibitions in 2023; INDEX 23, a leading Nonwovens show at Geneva in April; and ITMA, Milan, an international textile and garment technology exhibition in June.

The viscose fibre manufacturer Kelheim Fibres - exclusively using FSC® or PEFCTM certified pulps exclusively from sustainably managed sources - welcomes the preliminary political agreement reached between the European Parliament and the Council on an EU regulation on deforestation-free supply chains. The new rules, adopted at the end of 2022, are intended to prevent goods that cause forest degradation or deforestation from being placed on the EU market.

As one of the largest economies worldwide, the EU is a major consumer of wood-based raw materials. Therefore, the new law can significantly contribute to reducing global deforestation and forest degradation as well as protecting threatened forest areas.

“Wood is an incredibly versatile and valuable renewable resource and the basis for countless products. Our viscose fibres are just one example – they offer an environmentally friendly alternative to synthetic materials in various applications and are thus a promising material for the future. Of course, this only applies if the production of our raw materials does not take place at the expense of our earth's natural forest resources. These forests are a bastion of biodiversity and climate protection for our entire planet and must be protected at all costs. No one can escape this responsibility," says Craig Barker, CEO at Kelheim Fibres.

Within its TEXTILE SOLUTIONS, the CHT Group has developed solution approaches for manufacturing companies in the textile value chain that have to use a lot of energy for their production. This is intended to compensate high energy costs and make a positive contribution to climate protection.Application specialists work with customers to develop individual savings potentials that are specifically tailored to the production facilities and requirements. Thus, depending on the process, fabric and machine, energy savings of up to 30% can be achieved with the use of innovative CHT textile auxiliaries, dyes/pigments and the corresponding process optimisations. In addition, the numerous concepts and optimally matched products can minimise water consumption or shorten the process time.

Energy-efficient cold bleaching instead of pad-steam bleaching processes in continuous pretreatment and the 4SUCCESS process for energy-efficient and resource-saving pretreatment and dyeing of cotton help to save energy. Likewise, the use of polymer binders, which do not require energy-intensive fixation, saves energy.

Efficient pretreatment with the new polymer technology CPT (Comb Polymer Technology) achieves good cleaning effects even with low liquor ratios and thus less water to heat up. To save costs for energy-consuming heating, there is also the gentle low-temperature fixation in the easy care finishing. The OrganIQ EMS Jeans system enables jeans finishing with a reduced application temperature compared to standard processes.

With TIME BOOST, a process for fast polyester dyeing processes, not only significant energy but also time savings are achieved by omitting pre-washing and by shortening heating and migration times. SHORT CUT also leads to shorter process times when dyeing polyamide.

To avoid cost-intensive intermediate drying, the CHT Group offers the SCREEN-2-SCREEN with PRINTPERFEKT S2S which facilitates printing in a wet-on-wet technology.

In addition to numerous other products, the CHT Group also offers its customers digital tools to optimally support process optimizations. The "BEZAKTIV Soaping Advisor" calculation program within the CHT Textile Dyes app can be used to evaluate and improve dyeing and soaping processes in a simple and target-oriented way.

MS Printing Solutions and JK Group announce the appointment of Christopher Bernat as General Manager of North America and the Caribbean markets. He will be the main point of contact for overall business in the region. Chris joins MS Printing Solutions and JK Group with over 20 years of industry experience.

He was Director of Sales at Sawgrass Technologies prior to starting Vapor Apparel in 2004. He currently serves on the Executive Committee and Board of Directors of Printing United and resides in Charleston, South Carolina.

• adidas unveils its SS23 Melbourne Tennis Collection – an apparel range fit for performance
• Inspired by plants and florals, the collection features bold prints, vibrant colorways and a moiré effect textile
• The adidas SS23 Melbourne Tennis Collection will be available from Jan 13 2023

adidas launches its new SS23 Melbourne Tennis Collection, a range of performance apparel featuring striking colorful prints, inspired by plant life and nature. Select pieces feature a contrast-color mesh layering that when in motion creates a moiré effect and helps to mask the player’s movements and positioning on court.

With the help of innovation, adidas is seeing possibilities in turning towards new resources. For these products adidas turned to a greenhouse gas technology. It uses captured industrial emissions as a new material feedstock. CO₂ is fermented into ethanol which constitutes 30% by weight of a polyester yarn. adidas knitted this yarn into various products and now this carbon-based ethanol makes up a minimum of 15% by weight of these garments.

In addition, the collection also utilizes HEAT.RDY and Aeroready technologies. HEAT.RDY technology is designed to maximize airflow and optimize sweat distribution, while AEROREADY is powered by moisture-wicking fabric that absorbs sweat quickly for a dry feeling, helping players to move freely and comfortably on court.

The SS23 Melbourne Tennis Collection will be premiered on court by adidas athletes, including Stefanos Tsitsipas, Felix Auger Aliassime, Garbiñe Muguruza, Qiang Wang and Maria Sakkari.

The SS23 Melbourne Tennis Collection will be available from Jan 13.