Aus der Branche

Zurücksetzen
3432 Ergebnisse
22.04.2024

Epson auf der Texprocess 2024

Im Fokus des Messeauftritts Epsons auf der texprocess 2024 (23.4. bis 26.4., Messe Frankfurt) steht die Präsentation eines gemeinsam mit den Partnerunternehmen Summa aus Gistel, Belgien, und der Multi-Plot aus Bad Emstal aufgebauten Herstellungsprozesses von bedruckten Textilien. An den Ständen der Firmen sehen Fachbesucher:innen jeweils einen Abschnitt eines Produktionsprozesses mit reibungslos ineinandergreifenden Schritten. Der zentrale Teil des Workflows ist ein SureColor F9400H Drucker, der die textilen Motive auf Transferpapier druckt. Daneben zeigt Epson auf seinem Stand die Hybriddrucker SC-F2200 und SC-F1000 für Anwendungen aus dem DTG- & DTFilm Bereich. Der Auftritt Epsons auf der texprocess 2024 wird abgerundet durch eine Auswahl von Textilmustern, die von Druckern der industriellen Textildruckerreihe Monna Lisa angefertigt wurden.

Im Fokus des Messeauftritts Epsons auf der texprocess 2024 (23.4. bis 26.4., Messe Frankfurt) steht die Präsentation eines gemeinsam mit den Partnerunternehmen Summa aus Gistel, Belgien, und der Multi-Plot aus Bad Emstal aufgebauten Herstellungsprozesses von bedruckten Textilien. An den Ständen der Firmen sehen Fachbesucher:innen jeweils einen Abschnitt eines Produktionsprozesses mit reibungslos ineinandergreifenden Schritten. Der zentrale Teil des Workflows ist ein SureColor F9400H Drucker, der die textilen Motive auf Transferpapier druckt. Daneben zeigt Epson auf seinem Stand die Hybriddrucker SC-F2200 und SC-F1000 für Anwendungen aus dem DTG- & DTFilm Bereich. Der Auftritt Epsons auf der texprocess 2024 wird abgerundet durch eine Auswahl von Textilmustern, die von Druckern der industriellen Textildruckerreihe Monna Lisa angefertigt wurden.

Die Aufgabe des Epson SC-F9400H in dem textilen Workflow ist der Druck des Designs auf ein Transferpapier, das anschließend mit einem Kalander des Typs HJ 75 von Multi-Plot unter Einwirkung von Hitze und Druck in das gewählte textile Medium eingebracht wird. Nach der Kalandrierung des Designs auf dem Textil schneidet ein L1810 Laserschneider von Summa als letzten Schritt des Workflows das Material für eine Weiterverarbeitung zurecht.

Zum Druck des Designs selbst wird die Software „Epson Edge Print“ eingesetzt, die auch ein Farbmanagement ermöglicht. Dazu wird der neue Epson SD-10 Automated Scanning Table zusammen mit der im Lieferumfang des Scantisches enthaltenen Software „Edge Color Lite“ Software eingesetzt.

Der SD-10 Automated Scanning Table ist eine Lösung, mittels dem das Epson SD-10 Spektralphotometer automatisch Farbcharts einliest und so schnell und einfach präzise Farbprofile erstellt. Als Option für das seit letztem Jahr erhältliche SD-10 Spektralfotometer und der Software „Edge Color Lite“ bildet der neue SD-10 Automated Scanning Table eine benutzerfreundliche Komplettlösung zur Erstellung von ICC-Profilen. Auch ist mit dem SD-10 Automated Scanning Table und Edge Color Lite die Überprüfung und der Abgleich mehrerer Drucker desselben Modells möglich, sodass die Kalibrierung einzelner Geräte untereinander vereinfacht und beschleunigt wird.

Weitere Informationen:
Epson Texprocess Textildrucker Textildruck
Quelle:

Epson Deutschland GmbH

TMAS: Vandewiele Sweden launches e-commerce platform (c) Vandewiele Sweden AB
22.04.2024

TMAS: Vandewiele Sweden launches e-commerce platform

Vandewiele Sweden is spearheading a transformation in B2B operations for the industry, with a new e-commerce platform developed in Sweden. The company, a member of TMAS, the Swedish Textile Machinery Association, has taken on the task of developing the digital solution that will meet the future demands for Vandewiele Group customers worldwide.

The Vandewiele Sweden team has developed a user-friendly interface that exploits the latest "exploding view" diagrams to ensure customers can easily identify and order the components they need, all within a 1:1 digital representation. The next stage in 3D technology is set up and ready, although it awaits implementation and market readiness to fully integrate and utilize its features.

Adopting a phased approach, the company is initially introducing its IRO-branded accessories, spare parts and gauge parts, targeting textile mills, weavers and distributors. The platform has been carefully crafted to cater to the varying needs of its diverse clientele, offering streamlined direct sales and a transparent commission structure for agents and distributors.

Vandewiele Sweden is spearheading a transformation in B2B operations for the industry, with a new e-commerce platform developed in Sweden. The company, a member of TMAS, the Swedish Textile Machinery Association, has taken on the task of developing the digital solution that will meet the future demands for Vandewiele Group customers worldwide.

The Vandewiele Sweden team has developed a user-friendly interface that exploits the latest "exploding view" diagrams to ensure customers can easily identify and order the components they need, all within a 1:1 digital representation. The next stage in 3D technology is set up and ready, although it awaits implementation and market readiness to fully integrate and utilize its features.

Adopting a phased approach, the company is initially introducing its IRO-branded accessories, spare parts and gauge parts, targeting textile mills, weavers and distributors. The platform has been carefully crafted to cater to the varying needs of its diverse clientele, offering streamlined direct sales and a transparent commission structure for agents and distributors.

With an ambitious logistics promise of 48-hour dispatch and leveraging third-party payment service providers like Nets, the company assures speed and reliability in every transaction.

Scheduled for launch in April, Vandewiele stands ready to introduce its new e-commerce solution to key markets, including Scandinavia, the Baltics, parts of Europe, Turkey, and India.

Quelle:

TMAS, the Swedish Textile Machinery Association

KARL MAYER: Wearables-Partner des Projekts DiMo (c) KARL MAYER
22.04.2024

KARL MAYER: Wearables-Partner des Projekts DiMo

Trends wie Fitness-Lifestyle und Vitalität, die Quantified-Self-Bewegung, aktives Altern oder der Outdoor-Boom werden den Sport-, Gesundheits- und Wellness-Sektor in den kommenden Jahren stark verändern. Zudem werden technische Innovationen die Art und Weise, wie Menschen fit und gesund bleiben, neu definieren. Das Gemeinschaftsprojekt DiMo – Digital Motion soll den Transformationsprozess mitgestalten. Es lief 2023 in erster Runde und wird mit DiMo-NEXT für weitere vier Jahre fortgesetzt.

Mit dem Vorhaben soll transdisziplinär erforscht werden, wie das Bewegungserlebnis der Menschen verbessert, die Leistung gesteigert und ein nachhaltiger Lebensstil ermöglicht werden kann. Eine Schlüsselrolle spielen dabei die Potenziale durch digitale Technologien, insbesondere im Sensorenbereich. Zudem ist das Thema Bekleidung als Schnittstelle technologischer Lösungen zum Menschen wichtig. Daher befinden sich unter den 26 Projektpartnern aus Industrie und Forschung KARL MAYER und Grabher als Vertreter der Textilbranche.

Trends wie Fitness-Lifestyle und Vitalität, die Quantified-Self-Bewegung, aktives Altern oder der Outdoor-Boom werden den Sport-, Gesundheits- und Wellness-Sektor in den kommenden Jahren stark verändern. Zudem werden technische Innovationen die Art und Weise, wie Menschen fit und gesund bleiben, neu definieren. Das Gemeinschaftsprojekt DiMo – Digital Motion soll den Transformationsprozess mitgestalten. Es lief 2023 in erster Runde und wird mit DiMo-NEXT für weitere vier Jahre fortgesetzt.

Mit dem Vorhaben soll transdisziplinär erforscht werden, wie das Bewegungserlebnis der Menschen verbessert, die Leistung gesteigert und ein nachhaltiger Lebensstil ermöglicht werden kann. Eine Schlüsselrolle spielen dabei die Potenziale durch digitale Technologien, insbesondere im Sensorenbereich. Zudem ist das Thema Bekleidung als Schnittstelle technologischer Lösungen zum Menschen wichtig. Daher befinden sich unter den 26 Projektpartnern aus Industrie und Forschung KARL MAYER und Grabher als Vertreter der Textilbranche.

Der Textilmaschinenhersteller KARL MAYER bringt seine Expertise im Bereich Wearables in die Projektarbeiten ein. Das TEXTILE-CIRCUIT-Team seines TEXTILE MAKERSPACE hat bereits verschiedene Projektarbeiten hierzu erfolgreich umgesetzt. Zudem wird eine MJ 52/1 S von KARL MAYER bei V-trion, der Forschungsgesellschaft von Grabher in Lustenau, für die Herstellung elektrisch leitfähiger Textilien eingesetzt.

Der Startschuss für DiMo-NEXT fällt am 1. April 2024, also kurz vor der Techtextil 2024 in Frankfurt am Main. Auf der Messe wird KARL MAYER seinen Beitrag zu den Projektarbeiten vorstellen.

Quelle:

KARL MAYER Verwaltungsgesellschaft AG

CHT Textile Dyes App im neuen Design (c) CHT Gruppe
22.04.2024

CHT Textile Dyes App im neuen Design

Die CHT Textile Dyes App präsentiert sich in einem neuen Design. Seit mehr als zehn Jahren ist die CHT Textile Dyes App ein Begleiter in der Textilindustrie. Das überarbeitete Design macht eine Vielzahl von nützlichen Funktionen und Informationen noch leichter zugänglich.

Mit der CHT Textile Dyes App haben Anwender Zugriff auf das gesamte Farbstoff- und Pigmentportfolio der CHT sowie allen dazugehörigen Informationen, um das Färben einfacher und sicherer zu machen. Ebenfalls in der CHT Textile Dyes App integriert sind kostenlose In-App-Berechnungsprogramme mit nachhaltigen Lösungen, die den Anwender dabei unterstützen, seine Produkte nachhaltiger und kostengünstiger herzustellen, indem wichtige Ressourcen wie Wasser, Energie und Zeit in den Veredlungsprozessen effizient eingespart werden können.

Die CHT Textile Dyes App präsentiert sich in einem neuen Design. Seit mehr als zehn Jahren ist die CHT Textile Dyes App ein Begleiter in der Textilindustrie. Das überarbeitete Design macht eine Vielzahl von nützlichen Funktionen und Informationen noch leichter zugänglich.

Mit der CHT Textile Dyes App haben Anwender Zugriff auf das gesamte Farbstoff- und Pigmentportfolio der CHT sowie allen dazugehörigen Informationen, um das Färben einfacher und sicherer zu machen. Ebenfalls in der CHT Textile Dyes App integriert sind kostenlose In-App-Berechnungsprogramme mit nachhaltigen Lösungen, die den Anwender dabei unterstützen, seine Produkte nachhaltiger und kostengünstiger herzustellen, indem wichtige Ressourcen wie Wasser, Energie und Zeit in den Veredlungsprozessen effizient eingespart werden können.

Quelle:

CHT Gruppe

Collaboration between Eastman and Debrand: Recycling of apparel waste (c) Debrand
19.04.2024

Collaboration between Eastman and Debrand: Recycling of apparel waste

Eastman, a specialty materials company and producer of Naia™ cellulosic fibers, has formed a collaboration with Debrand, a logistics company specializing in finding sustainable solutions to apparel waste.

Teaming up with Debrand for collection of the waste, Eastman is using its molecular recycling technology to recycle 5,000 pounds of pre- and post-consumer apparel waste. The process breaks down apparel waste to its molecular building blocks and uses the certified recycled material to create Naia™ Renew fibers — circular fibers made from 60% sustainably sourced wood pulp and 40% recycled waste material via Global Recycled Standard-certified mass balance.

Eastman and Debrand are showcasing the transformative potential of molecular recycling technology to address the textile waste crisis. By providing more circular solutions for apparel waste, this partnership sets a new standard for sustainable practices in the fashion industry. Prior to its collaboration with Eastman, Debrand secured a strategic investment from Waste Management, a provider of comprehensive waste management in North America, to deliver circular solutions across the U.S. and Canada.

Eastman, a specialty materials company and producer of Naia™ cellulosic fibers, has formed a collaboration with Debrand, a logistics company specializing in finding sustainable solutions to apparel waste.

Teaming up with Debrand for collection of the waste, Eastman is using its molecular recycling technology to recycle 5,000 pounds of pre- and post-consumer apparel waste. The process breaks down apparel waste to its molecular building blocks and uses the certified recycled material to create Naia™ Renew fibers — circular fibers made from 60% sustainably sourced wood pulp and 40% recycled waste material via Global Recycled Standard-certified mass balance.

Eastman and Debrand are showcasing the transformative potential of molecular recycling technology to address the textile waste crisis. By providing more circular solutions for apparel waste, this partnership sets a new standard for sustainable practices in the fashion industry. Prior to its collaboration with Eastman, Debrand secured a strategic investment from Waste Management, a provider of comprehensive waste management in North America, to deliver circular solutions across the U.S. and Canada.

Eastman continues to partner with strategic brands and organizations to drive innovation and enhance the infrastructure for a circular economy in the textiles industry. Recently, Eastman teamed up with Patagonia to recycle 8,000 pounds of its unusable apparel.

19.04.2024

Rieter-Generalversammlung 2024

An der 133. ordentlichen Generalversammlung der Rieter Holding AG vom 17. April 2024 haben 312 Aktionärinnen und Aktionäre, die 68.7% des Aktienkapitals vertreten, teilgenommen.

Aktionärinnen und Aktionäre heissen alle Anträge des Verwaltungsrats gut:

  • Dividendenausschüttung von CHF 3.00 je Aktie genehmigt
  • Vergütungsbericht 2023 sowie künftige Vergütungen des Verwaltungsrats und der Konzernleitung genehmigt
  • Alle Verwaltungsräte, die sich zur Wiederwahl stellten, wurden gewählt
  • Thomas Oetterli neuer Verwaltungsratspräsident
  • Jennifer Maag neu in den Verwaltungsrat gewählt
  • Statutenrevision genehmigt

An der 133. ordentlichen Generalversammlung der Rieter Holding AG vom 17. April 2024 haben 312 Aktionärinnen und Aktionäre, die 68.7% des Aktienkapitals vertreten, teilgenommen.

Aktionärinnen und Aktionäre heissen alle Anträge des Verwaltungsrats gut:

  • Dividendenausschüttung von CHF 3.00 je Aktie genehmigt
  • Vergütungsbericht 2023 sowie künftige Vergütungen des Verwaltungsrats und der Konzernleitung genehmigt
  • Alle Verwaltungsräte, die sich zur Wiederwahl stellten, wurden gewählt
  • Thomas Oetterli neuer Verwaltungsratspräsident
  • Jennifer Maag neu in den Verwaltungsrat gewählt
  • Statutenrevision genehmigt
Quelle:

Rieter Management AG

Stratasys unveils D2G solution with Urban Tattoo denim collection Photo: Business Wire
19.04.2024

Stratasys unveils D2G solution with Urban Tattoo denim collection

Stratasys Ltd. announced the launch of its Direct-to-Garment (D2G) solution for the J850 TechStyle™ printer, the newest offering in the Stratasys 3DFashion™ direct-to-textile printing technology. The first example of its application is an Urban Tattoo denim collection which will be revealed at the Texprocess exhibition in Frankfurt, Germany on April 23.

The D2G solution is ideal for customization and personalization by enabling the application of full color multi-material 3D print directly on fully assembled garments of various fabric types including denim, cotton, polyester, and linen. It allows fashion brands to facilitate personalized and bespoke designs for customers, including the ability to tailor 3D prints according to individual preferences, sizes, and styles.  

Stratasys Ltd. announced the launch of its Direct-to-Garment (D2G) solution for the J850 TechStyle™ printer, the newest offering in the Stratasys 3DFashion™ direct-to-textile printing technology. The first example of its application is an Urban Tattoo denim collection which will be revealed at the Texprocess exhibition in Frankfurt, Germany on April 23.

The D2G solution is ideal for customization and personalization by enabling the application of full color multi-material 3D print directly on fully assembled garments of various fabric types including denim, cotton, polyester, and linen. It allows fashion brands to facilitate personalized and bespoke designs for customers, including the ability to tailor 3D prints according to individual preferences, sizes, and styles.  

Available in two sizes, the D2G tray kits facilitate the personalization of garments ranging from jeans to jackets, enabling designers and manufacturers to adopt more sustainable practices by reducing material waste. The seamless workflow delivers ease of calibration and compatibility with various garment sizes, streamlining the production process and fostering the creation of unique, personalized apparel.

Demonstrating this innovation, the Urban Tattoo collection showcases the potential and the ease of direct-to-garment 3D printing. Working with noted designers Karim Rashid, Travis Fitch, Zlatko Yanakiev at Meshroom along with Foraeva Studio, this collection shows the transformation of ordinary garments into pieces of wearable art, imbuing them with personal identity and meaning.

Like body tattoos, Urban Tattoos promote a deeper emotional connection, encouraging the upcycling of existing garments and contributing to a more sustainable fashion ecosystem. This aligns with Stratasys’ strategy for Mindful Manufacturing™. Stratasys has been able to create a new collection that will appeal to multiple brands that reach across diverse socio-economic backgrounds.

Quelle:

Stratasys Ltd

adidas: Official Team Wear for Paris 2024 (c) adidas AG
19.04.2024

adidas: Official Team Wear for Paris 2024

adidas unveils the team kits that will be worn at the upcoming Paris 2024 Olympic and Paralympic Games. With one central design story, all adidas teams and athletes are united under a design DNA that celebrates the unique identities of each nation.

All athletes share a passion for their sport, but this internal fire burns brightest around major international tournaments. In Paris, adidas will capture the flame that burns within every athlete through impactful fonts and detailed graphics – that feature across all apparel created for its 15 officially sponsored teams. To express the fire within athletes, the kits’ graphics, typeface, and all over print use a repeated line pattern which is brought to life through pops of color

Beyond team kits, adidas’ offering extends to the 2024 athlete pack – a 49-strong footwear collection which equips athletes across 41 different disciplines – more than 20 of which may be seen during the field of play this summer.

adidas unveils the team kits that will be worn at the upcoming Paris 2024 Olympic and Paralympic Games. With one central design story, all adidas teams and athletes are united under a design DNA that celebrates the unique identities of each nation.

All athletes share a passion for their sport, but this internal fire burns brightest around major international tournaments. In Paris, adidas will capture the flame that burns within every athlete through impactful fonts and detailed graphics – that feature across all apparel created for its 15 officially sponsored teams. To express the fire within athletes, the kits’ graphics, typeface, and all over print use a repeated line pattern which is brought to life through pops of color

Beyond team kits, adidas’ offering extends to the 2024 athlete pack – a 49-strong footwear collection which equips athletes across 41 different disciplines – more than 20 of which may be seen during the field of play this summer.

Weitere Informationen:
adidas AG adidas Sportswear
Quelle:

adidas AG

„AAA“ im MSCI ESG Rating Produziert von MSCI ESG Research, 2024.
18.04.2024

Epson erhält „AAA“ im MSCI ESG Rating

Epson hat erstmals die höchste Einstufung des MSCI ESG Ratings „AAA“ erhalten. MSCI ESG Ratings ist ein globaler Investmentindex für Umwelt, Soziales und Unternehmensführung (ESG), der von der Ratingagentur MSCI (Morgan Stanley Capital International) bereitgestellt wird. MSCI recherchiert und analysiert dafür den Umgang eines Unternehmens mit ESG-bezogenen Risiken und Chancen und ordnet es auf einer siebenstufigen Skala von AAA („Leader“) bis CCC („Laggard“) ein.
Epson führt sein erstes AAA-Rating auf sein Engagement zurück, international anerkannte, CSR-basierte Standards für die Beschaffung zu erfüllen sowie der Verbesserung der Systeme für Governance und die Entwicklung des Humankapitals im Jahr 2023.
 
Die Seiko Epson Corporation (TSE: 6724) wurde zudem als Bestandteil für den MSCI Japan ESG Select Leaders Index, den MSCI Japan Empowering Women Index (WIN) sowie für alle weiteren ESG-basierten Indizes für japanische Aktien* ausgewählt, die im japanischen Government Pension Investment Fund (GPIF) aufgenommen sind.
 

Epson hat erstmals die höchste Einstufung des MSCI ESG Ratings „AAA“ erhalten. MSCI ESG Ratings ist ein globaler Investmentindex für Umwelt, Soziales und Unternehmensführung (ESG), der von der Ratingagentur MSCI (Morgan Stanley Capital International) bereitgestellt wird. MSCI recherchiert und analysiert dafür den Umgang eines Unternehmens mit ESG-bezogenen Risiken und Chancen und ordnet es auf einer siebenstufigen Skala von AAA („Leader“) bis CCC („Laggard“) ein.
Epson führt sein erstes AAA-Rating auf sein Engagement zurück, international anerkannte, CSR-basierte Standards für die Beschaffung zu erfüllen sowie der Verbesserung der Systeme für Governance und die Entwicklung des Humankapitals im Jahr 2023.
 
Die Seiko Epson Corporation (TSE: 6724) wurde zudem als Bestandteil für den MSCI Japan ESG Select Leaders Index, den MSCI Japan Empowering Women Index (WIN) sowie für alle weiteren ESG-basierten Indizes für japanische Aktien* ausgewählt, die im japanischen Government Pension Investment Fund (GPIF) aufgenommen sind.
 
Epson hat vier wesentliche Felder identifiziert, auf die sich das Unternehmen konzentriert: Nachhaltigkeit in einer Kreislaufwirtschaft zu erreichen, die Grenzen der Industrie zu erweitern, die Lebensqualität zu verbessern und sozialer Verantwortung gerecht zu werden – dies geht damit einher mit der Philosophie des Unternehmens, gesellschaftliche Probleme zu lösen und dauerhafte Werte zu schaffen.

Weitere Informationen:
MSCI ESG Rating Epson Deutschland GmbH
Quelle:

Epson Deutschland GmbH

18.04.2024

Lenzing AG: Aufsichtsratswahlen

Die 80. ordentliche Hauptversammlung der Lenzing AG erteilte am 18. April 2024 den Mitgliedern des Vorstandes und des Aufsichtsrates die Entlastung für das Geschäftsjahr 2023 und setzte die Vergütung an die Mitglieder des Aufsichtsrates für das Geschäftsjahr 2024 im Voraus fest.

Mit Beendigung der Hauptversammlung schied Dr. Markus Fürst auf eigenen Wunsch aus dem Aufsichtsrat aus. Dr. Markus Fürst war seit 2021 als Mitglied im Aufsichtsrat und in verschiedenen Ausschüssen der Lenzing AG tätig.

Die Hauptversammlung wählte Dr. Cornelius Baur bis zum Ablauf der Hauptversammlung, die über die Entlastung für das Geschäftsjahr 2028 beschließt, neu in den Aufsichtsrat der Lenzing AG. Darüber hinaus wurde das Mandat von Melody Harris-Jensbach bis zur ordentlichen Hauptversammlung, die über das Geschäftsjahr 2028 beschließt, verlängert.

Die 80. ordentliche Hauptversammlung der Lenzing AG erteilte am 18. April 2024 den Mitgliedern des Vorstandes und des Aufsichtsrates die Entlastung für das Geschäftsjahr 2023 und setzte die Vergütung an die Mitglieder des Aufsichtsrates für das Geschäftsjahr 2024 im Voraus fest.

Mit Beendigung der Hauptversammlung schied Dr. Markus Fürst auf eigenen Wunsch aus dem Aufsichtsrat aus. Dr. Markus Fürst war seit 2021 als Mitglied im Aufsichtsrat und in verschiedenen Ausschüssen der Lenzing AG tätig.

Die Hauptversammlung wählte Dr. Cornelius Baur bis zum Ablauf der Hauptversammlung, die über die Entlastung für das Geschäftsjahr 2028 beschließt, neu in den Aufsichtsrat der Lenzing AG. Darüber hinaus wurde das Mandat von Melody Harris-Jensbach bis zur ordentlichen Hauptversammlung, die über das Geschäftsjahr 2028 beschließt, verlängert.

Der Aufsichtsrat der Lenzing AG setzt sich damit weiterhin aus zehn von der Hauptversammlung gewählten Mitgliedern zusammen: Dr. Cornelius Baur, Mag. Helmut Bernkopf, Dr. Christian Bruch, Dr. Stefan Fida, Dr. Franz Gasselsberger, Melody Harris-Jensbach, Cord Prinzhorn, MBA, Mag. Gerhard Schwartz, Dr. Astrid Skala-Kuhmann und Nicole van der Elst Desai. DI Stefan Ertl, Stephan Gruber, Bonita Haag, Helmut Kirchmair und Johann Schernberger wurden vom Betriebsrat in den Aufsichtsrat delegiert.

In der an die Hauptversammlung anschließenden konstituierenden Aufsichtsratssitzung wurde Cord Prinzhorn, MBA, zum Vorsitzenden, und Dr. Stefan Fida zum Stellvertretenden Vorsitzenden des Aufsichtsrates wiedergewählt.

Zum Abschlussprüfer für den Jahresabschluss und den Konzernabschluss für das Geschäftsjahr 2024 wurde die KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft bestellt.

Quelle:

Lenzing AG

Beaulieu Fibres International
18.04.2024

Beaulieu Fibres International launches Sustainable Fibres Program

As the 2024 edition of Techtextil, the leading international trade fair for technical textiles and nonwovens, gets underway in Frankfurt, Beaulieu Fibres International is introducing its Sustainable Fibres Program to help reshape fibres for sustainable solutions.

Through the initiative the company is looking to gain deeper insights into the challenges encountered by customers across the value chain to identify opportunities to leverage its expertise to deliver impactful products and services.

Beaulieu has identified several conversation triggers for Techtextil 2024, including recyclable, high performance, renewable, bio-circular, co-developed and made in Europe fibres, to find out what matters most to customers in terms of targets, green initiatives and sustainability expectations.
The Sustainable Fibres Program serves as a charter to help Beaulieu Fibres International accelerate its ‘fibres that build futures’ campaign, by educating on existing solutions, reshaping products and creating partnerships to facilitate market cooperation on shared challenges.

As the 2024 edition of Techtextil, the leading international trade fair for technical textiles and nonwovens, gets underway in Frankfurt, Beaulieu Fibres International is introducing its Sustainable Fibres Program to help reshape fibres for sustainable solutions.

Through the initiative the company is looking to gain deeper insights into the challenges encountered by customers across the value chain to identify opportunities to leverage its expertise to deliver impactful products and services.

Beaulieu has identified several conversation triggers for Techtextil 2024, including recyclable, high performance, renewable, bio-circular, co-developed and made in Europe fibres, to find out what matters most to customers in terms of targets, green initiatives and sustainability expectations.
The Sustainable Fibres Program serves as a charter to help Beaulieu Fibres International accelerate its ‘fibres that build futures’ campaign, by educating on existing solutions, reshaping products and creating partnerships to facilitate market cooperation on shared challenges.

In addition to leading the market within the framework of the European Green Deal, and alignment with the objectives of the proposed Ecodesign for Sustainable Products Regulation, Beaulieu Fibres International is committed to achieving its own sustainability targets outlined in its roadmap known as ROUTE 2030.

Weitere Informationen:
Beaulieu Fibres International
Quelle:

Beaulieu Fibres International

Steffen Jost, Rolf Pangels Foto BTE Handelsverband Textil Schuhe Lederwaren
Steffen Jost, Rolf Pangels
18.04.2024

ZFO-Sonntagsöffnung: OLG Zweibrücken fordert weiteres Gutachten

BTE ruft zur finanziellen Unterstützung auf

BTE-Ehrenpräsident Steffen Jost (Modehaus Jost, Grünstadt), Betreiber mehrere Modehäuser u.a. in der Südpfalz, hatte mit finanzieller und sachinhaltlicher Unterstützung des BTE gegen einen Store innerhalb des Zweibrücken Fashion Outlet (ZFO) geklagt. Denn dort dürfen die Geschäfte aufgrund einer älteren rheinland-pfälzischen Sonderregelung ohne einen jeweils konkreten Anlassbezug primär aufgrund der Nähe zum Flugplatz Zweibrücken „automatisch“ jährlich an 16 Sonntagen öffnen. Und das, obwohl der Linienflugverkehr dort, der seinerzeit als maßgeblich Vorrausetzung für besagte Sonderregelung galt, schon seit Jahren eingestellt ist.
 

BTE ruft zur finanziellen Unterstützung auf

BTE-Ehrenpräsident Steffen Jost (Modehaus Jost, Grünstadt), Betreiber mehrere Modehäuser u.a. in der Südpfalz, hatte mit finanzieller und sachinhaltlicher Unterstützung des BTE gegen einen Store innerhalb des Zweibrücken Fashion Outlet (ZFO) geklagt. Denn dort dürfen die Geschäfte aufgrund einer älteren rheinland-pfälzischen Sonderregelung ohne einen jeweils konkreten Anlassbezug primär aufgrund der Nähe zum Flugplatz Zweibrücken „automatisch“ jährlich an 16 Sonntagen öffnen. Und das, obwohl der Linienflugverkehr dort, der seinerzeit als maßgeblich Vorrausetzung für besagte Sonderregelung galt, schon seit Jahren eingestellt ist.
 
Dagegen ist dem stationären Einzelhandel in Rheinland-Pfalz und in der Region rund um das Outlet eine Öffnung nur an bis zu vier Sonntagen erlaubt, wenn ein konkreter Anlass - bürokratisch aufwendig - nachgewiesen wird. Der Anteil der Sonntagsöffnungen am Gesamtumsatz des ZFO ist nach BTE-Berechnungen mit 30 bis 35 Millionen € (brutto) signifikant. Es resultieren etwa 15 Prozent des jährlichen Gesamtumsatzes des ZFO Zweibrücken aus den zusätzlichen verkaufsoffenen Sonntagen. Bricht man den Umsatzentzug durch die Sonntagsöffnungen auf das Einzugsgebiet herunter, ergeben sich spürbare negative Auswirkungen für den Einzelhandel im Einzugsgebiet.
 
In den beiden Vorinstanzen vor dem Verwaltungsgericht und dem OLG Zweibrücken war Jost unterlegen. Der I. Zivilsenat des Bundesgerichtshofs (BGH) in Karlsruhe hatte im Juli 2023 jedoch ein Urteil des OLG Zweibrücken von August 2022 aufgehoben und an es zurückverwiesen. Der BGH stellte fest, dass es bei der Zulassung von verkaufsoffenen Sonntagen im ZFO entgegen der seinerzeitigen Annahme des OLG sehr wohl relevant ist, dass am Flugplatz Zweibrücken seit dem Jahr 2014 kein kommerzieller Linienflugverkehr mehr stattfindet. Veränderten sich die maßgeblichen Umstände, müssten Verordnungen auch überprüft werden. Eine Verordnung kann sodann rechtswidrig werden, wenn sich die maßgeblichen Umstände ändern.
 
Obwohl bereits zwei Gutachten zur räumlichen Wettbewerbssituation und Spürbarkeit bzw. Beeinträchtigung des ZFO auf andere Einzelhändler im Einzugsbereich vorliegen, verlangt das OLG Zweibrücken nunmehr abermals ein Gutachten zu diesen beiden Themenkomplexen. Hierdurch entstehen erneut Kosten, die vom Kläger (Jost) zu tragen sind. Zusätzliche, weitere Ausgaben z.B. für Anwälte und ggf. sogar eine weitere Verhandlung beim BGH sind zu erwarten.
 
In Anbetracht der bereits entstandenen Kosten im sechsstelligen Bereich bittet der BTE um finanzielle Unterstützung durch den Textil-, Schuh- und Lederwarenhandel und gerne auch anderen betroffenen Branchen. Schließlich hätten sowohl Steffen Jost als Unternehmen als auch der BTE insgesamt in der Sache für die Interessen vieler Händler in der Region gekämpft. Der Ausgang des Verfahrens könnte auch grundsätzlich weitreichende Bedeutung für die Bewertung von Wettbewerbsverzerrungen aufgrund von erweiterten Ladenöffnungszeiten anderer FOCs in Deutschland haben.
 
Alle Unternehmen, die den BTE bzw. Steffen Jost bei seinem Kampf gegen die nicht mehr sachgerechte Sonntagsöffnung im ZFO unterstützen möchten, können einen selbst festgelegten Betrag auf das Konto des BTE e.V. bei der Kreissparkasse Köln, IBAN DE73 3705 0299 0000 0253 86, Kennwort „Sonntagsöffnung ZFO“ überweisen. Der Einzahlungsbeleg sollte als Nachweis beim Finanzamt ausreichen, der BTE bestätigt zusätzlich aber gerne die finanzielle Unterstützung.
 
Der BTE versichert, dass die Gelder ausschließlich zur Finanzierung des Gutachtens bzw. des weiteren Prozesse verwendet werden. Sollten wider Erwarten die Einnahmen die Ausgaben übersteigen, werden die überschüssigen Gelder für die Branchenarbeit des BTE verwendet. Für Rückfragen steht BTE-Hauptgeschäftsführer Rolf Pangels gerne zur Verfügung unter Tel. 0171 1537337, E-Mail pangels@bte.de.

Quelle:

BTE Handelsverband Textil Schuhe Lederwaren

Dr. Stefan König neuer CEO der Optima Unternehmensgruppe Foto: Optima
Hans Bühler (links) übergibt den CEO-Posten an Dr. Stefan König
17.04.2024

Dr. Stefan König neuer CEO der Optima Unternehmensgruppe

Die Optima Unternehmensgruppe hat Dr. Stefan König zum neuen Chief Executive Officer (CEO) ernannt. Er übernimmt die Rolle von Hans Bühler, geschäftsführender Gesellschafter, der in die Position des Chairman wechselt.

Im April 2024 hat Hans Bühler den Titel des Chief Executive Officer (CEO) an Dr. Stefan König übergeben, der bereits seit 2021 als Geschäftsführer im Unternehmen tätig ist. König bringt über 25 Jahre Erfahrung aus verschiedenen Bereichen des Maschinenbaus mit. Zuletzt war er als CEO der ehemaligen Bosch Packaging Technology GmbH tätig.

Bühler selbst, der über 35 Jahren Sprecher der Geschäftsführung war, wird sich in der vierköpfigen Geschäftsführung als Chairman auf Zukunftsthemen, strategische Entscheidungen und den Gesellschafterkreis fokussieren.

Die Optima Unternehmensgruppe hat Dr. Stefan König zum neuen Chief Executive Officer (CEO) ernannt. Er übernimmt die Rolle von Hans Bühler, geschäftsführender Gesellschafter, der in die Position des Chairman wechselt.

Im April 2024 hat Hans Bühler den Titel des Chief Executive Officer (CEO) an Dr. Stefan König übergeben, der bereits seit 2021 als Geschäftsführer im Unternehmen tätig ist. König bringt über 25 Jahre Erfahrung aus verschiedenen Bereichen des Maschinenbaus mit. Zuletzt war er als CEO der ehemaligen Bosch Packaging Technology GmbH tätig.

Bühler selbst, der über 35 Jahren Sprecher der Geschäftsführung war, wird sich in der vierköpfigen Geschäftsführung als Chairman auf Zukunftsthemen, strategische Entscheidungen und den Gesellschafterkreis fokussieren.

König wird als CEO die Geschäftsführung koordinieren sowie Initia-tiven und Beschlüsse zur Zielerreichung treffen und durchführen. Er teilt sich mit Dr. Johannes-Thomas Grobe die Verantwortung für die vier Geschäftseinheiten Pharma, Consumer, Nonwovens und Life Science inklusive des Bereichs Wasserstoffwirtschaft, sowie die unternehmensübergreifenden Themen Digitalisierung, Nachhaltig-keit und Marketing. Die Zentraleinheiten wie Personal und Finanzen werden von Jan Glass gesteuert. Er wird im Laufe des Jahres sein Amt an seinen designierten Nachfolger Marco Beyl übergeben.

Weitere Informationen:
Optima Verpackung CEO
Quelle:

OPTIMA packaging group GmbH

17.04.2024

Stahl: 2023 ESG Report

Stahl has published its 2023 Environmental, Social and Governance (ESG) Report. The report outlines Stahl's recent progress on its ESG Roadmap to 2030 and the steps the company is taking to live its purpose of Touching lives, for a better world.

Stahl’s ESG Roadmap to 2030 includes interim targets for 2023, making this a year in which Stahl reached several important milestones. For example, the company reduced its scope 1 and 2 greenhouse gas (GHG) emissions by 22% versus 2022. Furthermore, in 2023 the Science Based Targets initiative (SBTi) validated Stahl's scope 1, 2 and 3 targets, making it one of the first coatings companies on the SBTi-approved list.

To reduce its GHG emissions, Stahl is actively increasing its use of clean energy. At the end of 2023, renewable energy generation, such as solar panels, had been installed at four Stahl sites, compared to its target of three.

Stahl has published its 2023 Environmental, Social and Governance (ESG) Report. The report outlines Stahl's recent progress on its ESG Roadmap to 2030 and the steps the company is taking to live its purpose of Touching lives, for a better world.

Stahl’s ESG Roadmap to 2030 includes interim targets for 2023, making this a year in which Stahl reached several important milestones. For example, the company reduced its scope 1 and 2 greenhouse gas (GHG) emissions by 22% versus 2022. Furthermore, in 2023 the Science Based Targets initiative (SBTi) validated Stahl's scope 1, 2 and 3 targets, making it one of the first coatings companies on the SBTi-approved list.

To reduce its GHG emissions, Stahl is actively increasing its use of clean energy. At the end of 2023, renewable energy generation, such as solar panels, had been installed at four Stahl sites, compared to its target of three.

Measuring – and reducing – the impact of products is an important step in the company’s scope 3 emissions. As such, 353 Stahl products now have either life cycle assessment (LCA) or product carbon footprint (PCF) data, far exceeding the 2023 target of 50.
 
New ratings and certifications
In 2023, 2,161 of Stahl's products were certified by Zero Discharge of Hazardous Chemicals (ZDHC), in line with ZDHC MRSL V3.1. These products represented 70% of the company’s sales revenue, demonstrating increased demand for coatings with a lower risk to health and the environment.

Stahl was also proud to achieve a Platinum rating from EcoVadis for the second year in a row, which places it in the top 1% of companies evaluated. Stahl also exceeded its 2023 target of an average EcoVadis rating of at least 60/100 for their top ten suppliers, with an average rating of 68/100 reported in December 2023.
Fostering a safe and welcoming work environment

A core pillar of Stahl’s ESG approach is how it supports its employees’ physical and mental well-being. The 2023 ESG Report outlines several examples of this commitment, such as improvement in its key safety KPIs for the third year in a row.

Besides keeping people safe, Stahl continues to make progress in fostering an open and inclusive workplace. For example, in support of diversity, equity and inclusion (DEI), Stahl appointed its first female leadership team member, trained 98% of its staff in DEI and established DEI committees at all Stahl sites. In addition, to strengthen communication, engagement and collaboration across the workforce, Stahl also established an internal workplace hub, MyStahl.

Weitere Informationen:
Stahl Coatings ESG
Quelle:

Stahl

(c) White Rabbit Maternity
17.04.2024

White Rabbit Maternity lanciert Jersey Kollektion

White Rabbit Maternity, eine Marke für Umstandsmode, laciert den ersten Jersey Drop. Diese neue Linie setzt sich zusammen aus sechs zeitlosen Designs, die Saisons überdauern und die die Anfang diesen Jahres präsentierte Knit-Kollektion ergänzt.

Die Jersey Kollektion besteht aus Basics, die eine Langlebigkeit während der Schwangerschaft und darüber hinaus gewährleisten. Die Kollektion umfasst einen Wickelcardigan, ein langärmliges Umstandskleid, ein Kleid ohne Ärmel, ein klassisches T-Shirt, ein Longsleeve und eine Leggings mit extra hohem Bund für optimalen Komfort.
Die neue Jersey Kollektion ist in Schwarz und Weiß sowie einem Leoparden-All-Over-Print erhältlich.

White Rabbit Maternity, eine Marke für Umstandsmode, laciert den ersten Jersey Drop. Diese neue Linie setzt sich zusammen aus sechs zeitlosen Designs, die Saisons überdauern und die die Anfang diesen Jahres präsentierte Knit-Kollektion ergänzt.

Die Jersey Kollektion besteht aus Basics, die eine Langlebigkeit während der Schwangerschaft und darüber hinaus gewährleisten. Die Kollektion umfasst einen Wickelcardigan, ein langärmliges Umstandskleid, ein Kleid ohne Ärmel, ein klassisches T-Shirt, ein Longsleeve und eine Leggings mit extra hohem Bund für optimalen Komfort.
Die neue Jersey Kollektion ist in Schwarz und Weiß sowie einem Leoparden-All-Over-Print erhältlich.

Jedes Teil der Jersey Kollektion ist so konzipiert, dass es zahlreiche Kombinationsmöglichkeiten bietet und sich so auch mit der Strickkollektion der Brand vielseitig kombinieren lässt zu Komplett Looks. White Rabbit Maternity setzt auch bei der Jersey Line den Nachhaltigkeitsansatz weiter fort. Auch der Jersey Drop wird in Europa produziert und ist OEKO-TEX® STANDARD 100 zertifiziert. Darüber hinaus werden für den Jersey Drop Stoffe verwendet, die dem CIRCULAR FABRIC STANDARD entsprechen, einem Standard, der Stoffe aus der Überproduktion oder aus Resten hochwertiger Marken wiederverwerten.

Weitere Informationen:
White Rabbit Schwangerschaft Jersey
Quelle:

White Rabbit Maternity / OnSpot-Media

17.04.2024

adidas: Preliminary results for Q1 2024

adidas announced preliminary results for the first quarter of 2024. In Q1, currency-neutral revenues increased 8% versus the prior year level. In euro terms, the company’s revenues grew 4% to € 5.458 billion (2023: € 5.274 billion). The company’s gross margin improved 6.4 percentage points to 51.2% during the quarter (2023: 44.8%). Operating profit reached € 336 million in Q1 (2023: € 60 million).

As a result of the better-than-expected performance during the quarter, the company has increased its full-year guidance. adidas now expects currency-neutral revenues to increase at a mid- to high-single-digit rate in 2024 (previously: increase at a mid-single-digit rate). The company’s operating profit is now expected to reach a level of around € 700 million (previously: to reach a level of around € 500 million).  

adidas announced preliminary results for the first quarter of 2024. In Q1, currency-neutral revenues increased 8% versus the prior year level. In euro terms, the company’s revenues grew 4% to € 5.458 billion (2023: € 5.274 billion). The company’s gross margin improved 6.4 percentage points to 51.2% during the quarter (2023: 44.8%). Operating profit reached € 336 million in Q1 (2023: € 60 million).

As a result of the better-than-expected performance during the quarter, the company has increased its full-year guidance. adidas now expects currency-neutral revenues to increase at a mid- to high-single-digit rate in 2024 (previously: increase at a mid-single-digit rate). The company’s operating profit is now expected to reach a level of around € 700 million (previously: to reach a level of around € 500 million).  

The latest Yeezy drop generated revenues of around € 150 million and an operating profit of around € 50 million in the first quarter. In its guidance, the company assumes the sale of the remaining Yeezy inventory during the remainder of the year to occur on average at cost. This would result in additional sales of around € 200 million and no further profit contribution during the remainder of the year.

The company continues to expect unfavorable currency effects to weigh significantly on the company’s profitability this year. These effects are projected to continue to negatively impact both reported revenues and the gross margin development in 2024.

Weitere Informationen:
adidas AG adidas financial year 2024
Quelle:

adidas AG

CARBIOS wins "So French So Innovative" award Photo: CARBIOS
Dr. Bruno LANGLOIS, Technologies & Institutional Partnerships Director for CARBIOS (center), receiving the « So French So Innovative » Award on behalf of CARBIOS at InnoEX 2024, Hong Kong.
17.04.2024

CARBIOS wins "So French So Innovative" award

CARBIOS was awarded 1st prize in the "So French So Innovative" Award organized by Business France, the Hong Kong Committee of French Foreign Trade Advisors (CCEF), La French Tech and its partners at InnoEX 2024 (taking place in Hong Kong from 13 to 16 April). The award recognizes French innovation to promote and support French Tech in the Asia-Pacific region. The final awards ceremony was held on the French pavilion in the presence of members of the Hong Kong Government and Christile Drulhe, Consul General of France in Hong Kong.

Emmanuel Ladent, CEO of CARBIOS: "Asia-Pacific is a key market for our PET biorecycling solution, and the 'So French So Innovative' Award is a recognition that supports CARBIOS’ prospection and commercial deployment in the region. CARBIOS' technology is generating a lot of interest, leading to promising discussions and the exploration of commercial agreements to support the sustainability commitments and international operations of current and future partners."

CARBIOS was awarded 1st prize in the "So French So Innovative" Award organized by Business France, the Hong Kong Committee of French Foreign Trade Advisors (CCEF), La French Tech and its partners at InnoEX 2024 (taking place in Hong Kong from 13 to 16 April). The award recognizes French innovation to promote and support French Tech in the Asia-Pacific region. The final awards ceremony was held on the French pavilion in the presence of members of the Hong Kong Government and Christile Drulhe, Consul General of France in Hong Kong.

Emmanuel Ladent, CEO of CARBIOS: "Asia-Pacific is a key market for our PET biorecycling solution, and the 'So French So Innovative' Award is a recognition that supports CARBIOS’ prospection and commercial deployment in the region. CARBIOS' technology is generating a lot of interest, leading to promising discussions and the exploration of commercial agreements to support the sustainability commitments and international operations of current and future partners."

CARBIOS' global presence
In a dynamic global PET market, where the share of recycled PET will increase, CARBIOS' ambition is to become a leading r-PET player by 2035. CARBIOS has extended its international reach to boost its commercial deployment worldwide. Teams in place in key markets are dedicated to identifying business opportunities and establishing commercial partnerships for PET biorecycling technology, with first agreements expected in 2024. To date, CARBIOS is represented in three regions: Europe, North America (including Canada) and Asia (China, Japan, Korea, Singapore, Taiwan, and soon India).

Weitere Informationen:
Carbios Awards PET recycling
Quelle:

CARBIOS

Wacker Chemical Corporation unter neuer Leitung Foto: WACKER
Christoph Kowitz
16.04.2024

Wacker Chemical Corporation unter neuer Leitung

Christoph Kowitz, derzeit Leiter der WACKER-Konzernforschung, übernimmt Anfang Mai die Leitung der US-Landesgesellschaft Wacker Chemical Corporation (WCC). Er folgt David Wilhoit nach, der seit 2015 für das Nord- und Mittelamerikageschäft des Konzerns verantwortlich war und nun in den Ruhestand geht.

Kowitz war bereits in unterschiedlichsten Führungspositionen tätig. Nach seiner Promotion in den Fächern Organische Chemie und Polymerchemie startete er 1996 seine Berufskarriere als Produktentwickler bei der BASF AG in Ludwigshafen. Von 1997 an war er mehrere Jahre als Unternehmensberater für McKinsey in Asien und in Europa tätig. Nach mehreren Stationen in der chemischen Industrie, unter anderem beim Spezialchemiehersteller Cognis, wechselte Kowitz 2013 zu WACKER, wo er die Leitung der Performance Silicones-Einheit innerhalb des Geschäftsbereichs WACKER SILICONES übernahm. Seit 2018 leitete er die zentrale Konzernforschung und damit auch das Innovationsmanagement im WACKER-Konzern.

Christoph Kowitz, derzeit Leiter der WACKER-Konzernforschung, übernimmt Anfang Mai die Leitung der US-Landesgesellschaft Wacker Chemical Corporation (WCC). Er folgt David Wilhoit nach, der seit 2015 für das Nord- und Mittelamerikageschäft des Konzerns verantwortlich war und nun in den Ruhestand geht.

Kowitz war bereits in unterschiedlichsten Führungspositionen tätig. Nach seiner Promotion in den Fächern Organische Chemie und Polymerchemie startete er 1996 seine Berufskarriere als Produktentwickler bei der BASF AG in Ludwigshafen. Von 1997 an war er mehrere Jahre als Unternehmensberater für McKinsey in Asien und in Europa tätig. Nach mehreren Stationen in der chemischen Industrie, unter anderem beim Spezialchemiehersteller Cognis, wechselte Kowitz 2013 zu WACKER, wo er die Leitung der Performance Silicones-Einheit innerhalb des Geschäftsbereichs WACKER SILICONES übernahm. Seit 2018 leitete er die zentrale Konzernforschung und damit auch das Innovationsmanagement im WACKER-Konzern.

Weitere Informationen:
Wacker chemicals polymers
Quelle:

Wacker Chemie AG

16.04.2024

CARBIOS: Fiscal-year 2023 financial results

  • CARBIOS Group’s solid financial structure: cash position of €192 million on December 31, 2023
  • Construction progress of world’s first PET biorecycling plant in France: in line with delivery targets for customers in 2026
  • Licensing: international sales teams deployed in more than ten countries, with several partnerships feasible for 2024

CARBIOS reported its operating and financial results for the financial year 2023. The financial statements as of December 31, 2023, were approved by the Company’s Board of Directors at their meeting on April 10, 2024.

2023 Financial highlights
The consolidated financial statements of the Company as of December 31, 2023, are presented in accordance with International Financial Reporting Standards (IFRS) as issued by the International Accounting Standards Board (IASB) and adopted by the European Union.

  • CARBIOS Group’s solid financial structure: cash position of €192 million on December 31, 2023
  • Construction progress of world’s first PET biorecycling plant in France: in line with delivery targets for customers in 2026
  • Licensing: international sales teams deployed in more than ten countries, with several partnerships feasible for 2024

CARBIOS reported its operating and financial results for the financial year 2023. The financial statements as of December 31, 2023, were approved by the Company’s Board of Directors at their meeting on April 10, 2024.

2023 Financial highlights
The consolidated financial statements of the Company as of December 31, 2023, are presented in accordance with International Financial Reporting Standards (IFRS) as issued by the International Accounting Standards Board (IASB) and adopted by the European Union.

For 2022 and 2023, these IFRS consolidated financial statements include the financial statements of CARBIOS, the parent company, and the financial statements of its fully integrated subsidiaries Carbiolice and CARBIOS 54. The group formed by CARBIOS, Carbiolice and CARBIOS 54 is hereinafter referred to as the “Group”.

These IFRS financial statements for the Group have been prepared to provide high quality information in line with that of similar companies and based on international standards.

Outlook
Given the progress made by the Group during 2023 and the success of the financing operation closed in July 2023 as well as the received grants, CARBIOS confirms its operating targets and the provisional calendar of the industrial and commercial deployment of its PET biorecycling technology.
2024  • Construction of the Longlaville plant further to permits obtained in October 2023
2024  • Recruitment of plant operations team and training at demonstration facility
2026  • First significant deliveries to clients

Alongside this project, CARBIOS aims to sign its first licensing contracts for its PET biorecycling technology in 2024.

Weitere Informationen:
Carbios financial year 2023
Quelle:

CARBIOS

16.04.2024

Stratasys published Second ESG and Sustainability Report

Stratasys Ltd. published its second Mindful Manufacturing™ ESG and Sustainability Report in accordance with the Global Reporting Initiative (GRI) standards, fulfilling its commitment to transparency. The report includes an extensive overview of activities and advancements in Stratasys’ environmental, social and governance (ESG) programs.

Some highlights of the Mindful Manufacturing ESG and Sustainability report, by category, include:

Environmental

  • Stratasys reduced water intensity by 32.5 percent across global operations, leading to an overall reduction in water usage by the company.
  • Solar panels installed at Israeli facilities generated 441,339 kWh of renewable energy, which contributed to 207 metric tons of reduced CO2 emissions, or the equivalent of planting 3,423 trees
  • Double digit (11.3 percent) increases in the number of spools, cartridges and canisters recycled through a new recycling program.

Social

Stratasys Ltd. published its second Mindful Manufacturing™ ESG and Sustainability Report in accordance with the Global Reporting Initiative (GRI) standards, fulfilling its commitment to transparency. The report includes an extensive overview of activities and advancements in Stratasys’ environmental, social and governance (ESG) programs.

Some highlights of the Mindful Manufacturing ESG and Sustainability report, by category, include:

Environmental

  • Stratasys reduced water intensity by 32.5 percent across global operations, leading to an overall reduction in water usage by the company.
  • Solar panels installed at Israeli facilities generated 441,339 kWh of renewable energy, which contributed to 207 metric tons of reduced CO2 emissions, or the equivalent of planting 3,423 trees
  • Double digit (11.3 percent) increases in the number of spools, cartridges and canisters recycled through a new recycling program.

Social

  • More than 38,000 hours of employee training were provided, equaling 18 hours of training per employee.
  • Approaching world-class status with employee engagement, with a 78 percent participation rate in the last all-employee survey, with an all-time high engagement score of 73.
  • 81 percent of managers participated in management training.
  • 4 diversity KPIs were set in 2022, focusing on hiring practices. Targets were:
  • 100 percent of candidate slates for manager and above will have a diverse slate
  • 35 percent of management hires will be women
  • 25 percent of tech hires will be women
  • 40 percent of intern/student hires to reflect a range of ethnicity and gender diversity.

Governance

  • 100 percent of new suppliers in 2021 and 2022 signed the Supplier Code of Conduct, which includes environmental, social and ethical standards.
  • More than 97% of all employees completed compliance training.
  • No product-related health and safety incidents of non-compliance occurred in 2021 or 2022.
Quelle:

Stratasys Ltd.