Aus der Branche

Die Reifenhäuser Gruppe hat auf der K 2025 in Düsseldorf erstmals sein neues unternehmensweites User Interface präsentiert, das eine einheitliche Designsprache für Blasfolien-, Flachfolien- und Vliesstoff- Anlagen sowie eine besonders einfache Bedienung bietet. Das Gesamtkonzept überzeugt auch die Jury des German Design Awards, die das System während der Messe mit dem renommierten Designpreis ausgezeichnet hat. 

In Zeiten des weltweit wachsenden Fachkräftemangels, ist die einfache und intuitive Bedienung von Produktionsanlagen ein entscheidendes Erfolgskriterium. Deshalb hat Reifenhäuser sein Human Maschine Interface (HMI) komplett überarbeitet und eine neue, optisch ansprechende und reaktionsschnelle Lösung vorgestellt. Sie vereint die komplexen und heterogenen Anforderungen unterschiedlicher Extrusionsbereiche in einem flexiblen und skalierbaren System. Reifenhäuser zeigt die neue HMI im Rahmen seines – während der K Messe stattfindenden – Open House an seinen neuen Blas- und Flachfolienanlagen EVO GEN3 und EVEREX. 

Der Bediener gelangt in maximal zwei Klicks zu jeder Einstellung und behält dank individualisierbarer Dashboards und einer übersichtlichen Start-up- Seite jederzeit die Kontrolle über den gesamten Extrusionsprozess. Das intelligente Farbkonzept sowie die intuitive und reaktionsschnelle Touch- Oberfläche beschleunigen die Eingaben deutlich.

Die Neuentwicklung erfolgte gemeinsam mit HMI Project - ein vielfach ausgezeichnetes Büro für Human Maschine Interfaces (HMI). Um den Bedienalltag an komplexen Maschinen zu erleichtern, stand bei der Entwicklung der neuen HMI der Mensch im Mittelpunkt. In einem nutzerzentrierten Prozess wurden reale Nutzungsszenarien analysiert und durch Usability-Tests validiert. Ergebnis ist ein modulares, skalierbares und extrem flexibles Interface, das technische Komplexität und Benutzerfreundlichkeit auf höchstem Niveau vereint. Assistenzsysteme, informative Illustrationen und eine klare visuelle Hierarchie unterstützen den Bediener bei der Einrichtung, Überwachung und Optimierung sensibler Produktionsprozesse. 

Der German Design Award zählt zu den angesehensten Auszeichnungen der Designlandschaft. Seit 2012 identifiziert der Award maßgebliche Gestaltungstrends, macht sie sichtbar und zeichnet sie aus. Jährlich werden herausragende Arbeiten aus den Bereichen Produktdesign, Kommunikationsdesign und Architektur prämiert.

Mit dem European Brand & Packaging Design Association (epda) und dem Verband Druck + Medien Nord-West (VDM Nord-West) wächst das Partnernetzwerk der PRINT DIGITAL CONVENTION 2026. Die neuen Kooperationen bringen frische Impulse, erweitern die Reichweite und stärken die Attraktivität der PDC als Plattform für Austausch, Innovation und neue Geschäftspotenziale. Am 16. und 17. Juni 2026 lädt die Kongressmesse Macherinnen und Macher aus der Print-, Medien- und Kommunikationsbranche ins Foyer der Halle 1 auf dem Düsseldorfer Messegelände ein. 

Zukunftsgerichtete Kooperationen stärken das Profil der PDC
Mit der epda, dem führenden europäischen Netzwerk für Packaging-Design, und dem VDM Nord-West, einem der größten Regionalverbände der Druck- und Medienbranche, gewinnt die PRINT DIGITAL CONVENTION zwei Partner, die Kreativität, Branchenkompetenz und starke Netzwerke einbringen. Die Kooperationen erweitern das thematische Spektrum der Messe, stärken die fachliche Relevanz und setzen ein klares Zeichen für interdisziplinäre Zusammenarbeit.

Raum für Innovation und Geschäft
Mit rund 1.000 Quadratmetern Ausstellungsfläche, einem hochwertig kuratierten Kongressprogramm und innovativen Multichannel-Formaten bleibt die PRINT DIGITAL CONVENTION 2026 Impulsgeberin der Branche. Die neuen Partnerschaften verstärken Reichweite, Themenvielfalt und Marktzugang – und bieten Ausstellern beste Chancen, sich in einem zukunftsrelevanten Umfeld wirkungsvoll zu präsentieren.

Die PRINT DIGITAL CONVENTION findet vom 16. bis 17. Juni 2026 in Düsseldorf statt und wird vom Fachverband Medienproduktion (FMP) in Partnerschaft mit der Messe Düsseldorf, der drupa, veranstaltet. 

Königlicher Besuch auf der K 2025: Seine Königliche Hoheit Prinz Saud Turki Al-Faisal Al Saud, Vorsitzender der Riyadh Exhibitions Company (REC), hat gemeinsam mit Wolfram N. Diener, Vorsitzender der Geschäftsführung der Messe Düsseldorf, einen weiteren Meilenstein in der engen Zusammenarbeit beider Partner gesetzt. Im Rahmen der Kunststoff- und Kautschukmesse K 2025 bekräftigten beide Seiten mit einem offiziellen Handschlag ihre strategische Kooperation.

Der Handschlag markiert einen weiteren Meilenstein in der internationalen Expansion der Weltleitmessen K, interpack und drupa nach Saudi-Arabien. Dort lässt sich derzeit beobachten, wie dynamisch und vielschichtig sich die Wirtschaft des Mittleren Ostens entwickelt. Die Riyadh Exhibitions Company veranstaltet dort vom 12. bis 15. April 2026 die Fachmessen Saudi Plastics & Petrochem und Saudi Print & Pack mit über 500 ausstellenden Unternehmen aus den Bereichen Petrochemie, Kunststoff-, Druck- und Verpackungsindustrie. Dieses stark wachsende Messequartett, dessen Ausstellerzahl seit 2018 um rund 70 Prozent gestiegen ist, bietet ideale Anknüpfungspunkte für die Messe Düsseldorf. 

Die neue Präsenz in Riad ergänzt das bestehende Auslandsportfolio der Messe Düsseldorf – im Bereich Kunststoff und Kautschuk mit der „K Alliance“, im Segment Processing und Packaging mit der „interpack alliance“ sowie im Bereich Print Technologies mit der „drupa alliance“. Ziel der Partnerschaft ist es, an der wachsenden wirtschaftlichen Dynamik im Mittleren Osten aktiv zu partizipieren. Bereits im Frühjahr 2025 hatten beide Partner ihre strategische Zusammenarbeit mit einem Memorandum of Understanding offiziell dokumentiert. 

Zahlreiche Anknüpfungspunkte für das Düsseldorfer Messeportfolio
Wolfram N. Diener, Vorsitzender der Geschäftsführung der Messe Düsseldorf, hebt die Bedeutung dieser Entscheidung hervor: „Wir sind zur richtigen Zeit am richtigen Ort. Mit unserem Engagement in einem Messemarkt, der weltweit am schnellsten wächst, stärken wir unsere Position als eine der international erfolgreichsten Messegesellschaften. Saudi-Arabien und die Vereinigten Arabischen Emirate stellen ihre Wirtschaft immer vielfältiger auf – dadurch ergeben sich zahlreiche Anknüpfungspunkte für unser breites Messeportfolio und neue Potenziale für unsere Kunden.“ Dass die wirtschaftliche Transformation der Region zunehmend internationale Aufmerksamkeit erfährt, zeigte sich auch im hochrangigen Besuch: Seine Exzellenz Bandar bin Ibrahim Al-Khorayef, Minister für Industrie und Bodenschätze Saudi-Arabiens, besucht aktuell die K 2025. Bereits im letzten Jahr hatte er sich auf der drupa 2024 ein Bild vom internationalen Messegeschehen in Düsseldorf gemacht.

Hohes Wirtschaftswachstum im Mittleren Osten
Das spiegelt sich in den Wirtschaftsdaten der Staaten des Gulf Cooperation Council (GCC) wider. Deren jährliche Wachstumsrate von sechs Prozent bis 2029 übertrifft dem Beratungsunternehmen jwc zufolge sowohl die der EU (3%) als auch den weltweiten Durchschnitt (5%). 

Auf bestehender Stärke aufbauen: bisherige Schritte in der Region
Bei den aktuellen Neugeschäftsaktivitäten handelt es sich nicht um die ersten Schritte der Messe Düsseldorf in der Region. Seit 2007 besteht eine erfolgreiche Partnerschaft der K mit der ArabPlast in Dubai. Seit 2019 treibt die Messe Düsseldorf ihr Geschäft unter anderem mit den interpack alliance Messen pacprocess MEA und der Food Africa Cairo in Ägypten voran – dem Bindeglied zwischen dem Mittleren Osten und Afrika. Seit 2024 ergänzt außerdem eine neue Tochtergesellschaft das globale Netzwerk der Messe Düsseldorf – in der Türkei, die die Brücke zwischen Europa und dem Mittleren Osten schlägt. Die Offensive in Saudi-Arabien ist nun der nächste folgerichtige Schritt. 

As a leader in colour measurement and management solutions, Verivide will showcase its latest DigiEye imaging system at the forthcoming ITMA Asia + CITME exhibition in Singapore from October 28-31.

This benefits from 100% LED illumination, improving the accuracy of colour assessments while supporting environmentally responsible practices in colour management.

Designed for efficiency and reliability, the DigiEye includes integrated dust filtration and a fully enclosed camera for added security. 

Unlike its predecessor, the new DigiEye no longer requires annual fluorescent lamp changes, thanks to its 100% LED light source. The system also includes software-integrated lighting controls and lighting geometry checking, enhancing its precision and ease of use. Additionally, it now has the ability to auto-capture images upon door closure, making it ideal for imaging multiple samples quickly and efficiently.

The new DigiEye offers significant upgrades, including a 67% larger imaging area and a 112% larger measurement area. Its drawer load rating has increased by 55%, and the LED light source lasts ten time longer than before. 

As part of the VeriVide ecosystem, the DigiEye integrates seamlessly with UltraView, VisionView and the VeriVide Portal, offering a comprehensive solution for all colour management needs. 

Abrasion and pilling testing 
Martindale testing needs little introduction to textile manufacturers, being well established as the industry standard for abrasion and pilling testing since its initial development and introduction by James Heal back in the 1940s.

For 2025, however, James Heal’s development team have taken a fresh look at this classic instrument and the result is the new Martindale Motion.
This redesigned nine-station Martindale instrument with individual lifting heads now offers the flexibility to run each station independently for carrying out different textile tests simultaneously.

Multiple textiles can be tested at the same time through to conclusion without intervention. Once set up, the Martindale Motion can be left running with the sample holders automatically lifting at the required evaluation points, freeing up the operator’s time to do other work without the need to return until the abrasion or pilling test is fully completed, including overnight.

Each sample is kept in-tact at the end point for evaluation and checking, reducing queries on grading and the potential need for re-testing. Further refinements include a new hinged access to change the self-aligning drive pins, allowing quick and safe switching between tests.

Designed and manufactured in the UK, the James Heal Martindale range has seen numerous updates, models and innovations over the years, such as touchscreen and user-friendly software, best-in-class safety features combined with the signature near silent running of this staple lab instrument. Added to this have been the introduction of the DurAbrasion multi-function testing machine, later followed by the market-leading evolution, the AquAbrasion wet abrasion tester launched in 2019.

The Martindale Motion, however, is now taking productivity and efficiency to a higher level than ever before.

Radio frequency drying
Total control of textile drying is meanwhile enabled with the advanced radio freqency (RF) technology of Strayfield, which has over 4,000 installations worldwide and provides solutions tailored to diverse textile applications such as cotton, wool, polyester, nylon, silk, acrylic and speciality blends.

Strayfield technology enables consistent quality, superior output and sustainability benefits through gentle and uniform drying, ensuring even results and moisture removal across entire batches and preserving fibre integrity, colour vibrancy and softness without yellowing or shrinkage.
Adaptive electrodes regulate power delivery according to product height and moisture, maximising efficiency and eliminating energy waste and unlike conventional rod systems, Strayfield’s full-area plates deliver consistent energy density for gentle drying without hotspots.

Fünf Monate vor der EuroShop 2026 ist der Zuspruch in der Ausstellerschaft sehr positiv. Obwohl die wirtschaftliche Lage im Handel derzeit herausfordernd und von Umbrüchen geprägt ist, haben sich viele Aussteller frühzeitig zur Teilnahme entschlossen. Besonders stark ist der Zuspruch in den Bereichen Food Service Equipment, Retail Technology, Refrigeration & Energy Management sowie Expo & Event.

Nächstes Jahr trifft sich die internationale Handelswelt bereits zum 22. Mal in Düsseldorf und feiert einen besonderen Geburtstag: Die EuroShop wird 60 Jahre alt. Seit ihrer Premiere im Jahr 1966 hat sich die Messe zur global führenden Plattform für die Retail-Welt entwickelt, die alle drei Jahre Fachbesucherinnen und -besucher aus der ganzen Welt anzieht. Für Entscheidungsträger aus dem Handel, Architektur- und Designbüros, Ladenbau und -planung ist sie ein Pflichttermin, der einen Blick in die Zukunft des Einkaufens ermöglicht. Vom 22. bis 26. Februar 2026 feiert The World´s No.1 Retail Trade Fair wieder die aktuellsten Retail Innovationen und natürlich auch ihr Jubiläum mit einem „Global Retail Festival“. Fachbesuchende aus der ganzen Welt werden vom 22. bis 26. Februar 2026 in Düsseldorf am Rhein erwartet. Rund 1.900 Aussteller aus über 60 Nationen werden ihre Lösungen und Produkte auf einer Ausstellungsfläche mehr als 100.000 Netto-Quadratmetern in insgesamt 14 Messehallen präsentieren.

In sieben Erlebnisdimensionen zeigt die EuroShop die Bandbreite an Innovationen, die den Handel von morgen bewegen. Die Dimensionen spiegeln die vielfältigen Disziplinen wider, die den Retail spannend und attraktiv machen: Shopfitting & Store Design ist das Herzstück und die größte der Dimensionen: Rund 450 Aussteller – darunter führende Architektur- und Store Design Büros sowie Hersteller – zeigen auf über 27.000 angemeldeten Quadratmetern Fläche ihre neuesten Entwicklungen. Das Spektrum reicht von innovativen Konzepten, beeindruckenden Shop Designs und Visual Merchandising Lösungen über Materialien sowie Möbeln bis hin zu modularen Systemen für den Point of Sale. Die Lighting Dimension wird erneut zum Blickfang beim Betreten der EuroShop. Sie zeigt, wie durchdachte Beleuchtung Stores in Erlebniswelten verwandelt, Atmosphäre schafft und den Point of Sale eindrucksvoll in Szene setzt. Die Dimension Expo & Event Marketing erfährt eine besonders große Nachfrage. Die Flächen reichen nicht mehr aus, sodass sie erstmals auf zwei Hallen ausgeweitet wird. Mit über 25.000 Quadratmetern Fläche wird der Bereich Refrigeration & Energy Management besonders groß. Dies belegt nicht nur den Bedarf an energieeffizienten Technologien und nachhaltiger Kühlung, sondern auch, wie stark die Handelsgastronomie boomt. In der Dimension EuroCIS (Retail Technology) präsentieren über 550 Aussteller, wie KI, Customer Centricity, Smart Stores und viele weitere Technologien die Zukunft des Handels prägen. Die Dimension Retail Marketing verdeutlicht eindrucksvoll, wie wichtig es ist, Kundinnen und Kunden ein Einkaufserlebnis mit allen Sinnen zu bieten. Multisensorische Inszenierungen und innovative Instore Kampagnen zeigen, wie sich Kaufimpulse gezielt verstärken lassen.

Zahlreiche Sonderflächen laden dazu ein, tief in verschiedene Themenbereiche einzutauchen. Im Designers’ Village präsentieren internationale Architekturbüros und Designstudios ihre visionären Konzepte. Neu ist die Sonderfläche VM Experience, die das Visual Merchandising interaktiv, dialogisch und kreativ erlebbar macht. Das Food Service Innovation Hub beleuchtet die digitale Transformation und Automatisierung in der Handelsgastronomie, während die Italian Lighting Lounge eindrucksvoll zeigt, welche Rolle Licht im modernen Store Design spielt. Im Shop! Village stehen Visual Merchandising und POS-Marketing im Vordergrund. Wieder dabei sind das IFES Global Village, das dlv Village und der Start-up Hub. In der 60’s Lounge leben die Zeitgeschichte und die Anfangstage der EuroShop wieder auf. Auf sieben Stages präsentieren Retailer und Aussteller Trends, Cases und Fachbeiträge. Diskussionsrunden regen zum Wissensaustausch über zukunftsweisende Topics der internationalen Handelswelt an.

Die Guided Innovation Tours auf der EuroShop treten im Jubiläumsjahr mit einem breiteren Angebot auf: Touren zu verschiedenen Schwerpunktthemen sorgen während der Laufzeit für einen einfachen Überblick über spannende Aussteller in den Bereichen Sustainable Materials und Store Design, Retail Tech Innovation, Energy Management & Optimization sowie Food Service Innovationen. Auch Store Touren zu interessanten Shop-Konzepten am Standort Düsseldorf werden zum ersten Mal stattfinden.

In response to unprecedented market demand, BW Converting, a member of TMAS, the Swedish textile machinery association, will provide details about its new Baldwin TexChroma digital spray dyeing system at ITMA Asia + CITME in Singapore from October 28-31.

“We are excited to launch TexChroma because spray dyeing is the future and many of our customers are already seeing the benefits,” says Yiannis Vasilonikolos, BW Converting Sales Leader for Textiles, who has many years’ experience in textile dyeing technology. “We have conducted successful trials of TexChroma with pigment, reactive, acid and disperse dyes on both cotton and synthetic fibres.”

From production data to date, TexChroma can achieve savings in energy, dyes and chemicals of more than 30% compared to conventional continuous pad batch dyeing using steam, and up to 50% compared to exhaust reactive dyeing. 

It also benefits from an advanced technology enabling reactive dyestuffs and alkali fixation chemicals to be mixed just seconds before spray application, in order to completely eliminate any ‘tailing and listing’– uneven dye application or colour variations.

The TexCoat® G4 Legacy
The introduction of TexChroma follows the runaway success of BW Converting’s Texcoat G4 finishing system in the past few years.

“TexCoat G4 spray technology was developed in Sweden from our off-set printing business, and we initially focused on installing units in Europe and the USA,” explains Vice President of Global Business Development for Textiles Rick Stanford. 
“In the past two years, however, we have been very active in Asia, with 35 units sold – and many of these customers have been asking for a similar technology for the dyeing process.” 

The first TexChroma will be installed at the plant of a very well-known Italian continuous dyer which is part of a larger textile manufacturing group, in order for it to be fully industrially tested before going into series production.

“Our first customer is close by our facility in Sweden, has the practical dyehouse skills we can learn from, and is a satisfied TexCoat G4 customer,” Stanford says. “We believe a major benefit of TexChroma will be in eliminating much rework which is common in dyehouses, but we’ve been very cautious about providing details on TexChroma too early. The dyeing process is unforgiving, and we must get it right the first time. The market has been ready for quite some time. And now, so are we.”

TMAS members in Singapore
In further new developments from TMAS members at the Singapore show, Kinna Automatic will provide details of its complete robotic lines for the production of pillows and duvets for the home furnishings sector and introduce the new Hector industrial sewing machine designed for the heavy duty circular and point stitching of filled textile components.

Eltex has made an important breakthrough on its EyETM tension monitoring system for the heat setting, tufting, warping and winding sectors, with the addition of electromagnetic brakes in combination with the latest advanced sensors. These enable tension variation to not only be detected, but automatically adjusted in real time during operation, rather than manually changed as previously.

The company’s ACT-R unit can further significantly reduce the selvedge yarn waste from the weft insertion systems of rapier weaving machines, while at the same time maintaining equal and steady tension across all pre-winders.

Advanced weaving control is also the bedrock of business for Vandewiele Sweden AB, which supplies weft yarn feeding and tension control units for weaving looms to the majority of the leading weaving machine manufacturers, as well as for retrofitting in working mills around the world The company will present its latest X4 yarn feeders with integrated accessory displays and has recently further strengthened its product portfolio with IRO Gaugepart modules. These are applied to tufting looms to determine the appearance of a carpet in terms of feel and structure.

Finally, the colarette machines of Svegea set the standard throughout Asia for the high speed production of tubular apparel components such as cuffs, collars and neck tapes and in Singapore the company will demonstrate its EC 50 and EC 200 with E-Drive II models, in addition to linked cutting systems.

The countdown for submissions has begun. Until 15 December 2025, companies can enter their developments for the Techtextil Innovation Award and the Texprocess Innovation Award. Those selected by the distinguished juries benefit from international visibility as well as from the reputation and reach of the two leading trade fairs. From 21 to 24 April 2026, Techtextil and Texprocess bring together the global industries in Frankfurt. The presentation of the Innovation Awards and the showcasing of the winning ideas is among the most prominent highlights.

The industry is evolving at a rapid pace – from new advances in technical textiles and nonwovens to forward-looking manufacturing and processing technologies. Current developments such as the use of AI, sustainable approaches and new production methods are creating additional opportunities for innovation. Especially in times of recession, tariffs and restrained investment, these impulses take on particular significance. They open up new opportunities in numerous fields, ranging from mobility and medicine to apparel. The Techtextil and Texprocess Innovation Awards provide international visibility for the best ideas.

The innovations are driving progress in numerous industries. In 2024, the award winners presented recyclable fibre composites for aviation, self-cooling textiles for façades and measurement methods for body scans based on 4D scanning. Whether in mobility, construction, medicine or apparel – textile and technological innovations are creating new opportunities for progress.

Categories Techtextil Innovation Award 2026

• New Concept
• New Material
• New Application
• New Product
• New Chemicals & Dyes
• New Recycled Materials & Recycling Technologies
• New Production Technology, Digitalisation & AI Solutions

Submit application: https://solutions.techtextil.com/

Categories Texprocess Innovation Award 2026

• Economic quality (cost minimisation, time and process optimisation, automation)
• Ecological quality (climate protection, energy efficiency, sustainability, recycling, circularity)
• Digitalisation + AI
• Innovation for quality improvement

Submit application: https://solutions.texprocess.com/

Information on participation
The submission deadline for all applications for the Techtextil and Texprocess Innovation Awards 2026 is 15 December 2025. All companies, institutes, universities, polytechnics and individuals are eligible to apply. Participation is free of charge. Submitted developments must have been on the market for less than two years or be shortly before the market launch. From mid-December 2025, two experienced international expert juries examine all submitted products in detail and evaluate them according to criteria such as degree of innovation, market potential, sustainability, choice of materials and technical quality. The winning companies are formally and prominently presented on the first day of the trade fair, 21 April 2026, in Frankfurt am Main.

EDANA concluded its flagship event, OUTLOOK™ 2025, marking it as a major success with 475 participants from 207 companies across the nonwovens industry addressing the biggest questions. The three-day conference highlighted the urgent need for a unified approach to sustainability, regulation, and innovation in the absorbent hygiene and wipes sectors.

EDANA concluded its flagship event, OUTLOOK™ 2025, last week, marking it as a major success with 475 participants from 207 companies across the nonwovens industry addressing the biggest questions. The three-day conference highlighted the urgent need for a unified approach to sustainability, regulation, and innovation in the absorbent hygiene and wipes sectors.

OUTLOOK™ conference always serves as a critical hub for dialogue, bringing together industry leaders, innovators, and policy experts. This year's conversations consistently centred on how to turn today’s challenges into tomorrow’s opportunities.

A World in Flux: Global Insights and Market Realities 
The event kicked off with a powerful keynote from Ambassador Ivo H. Daalder, who offered a big-picture view of how global alliances and economic policies are reshaping trade and market opportunities. This strategic perspective set the stage for a deeper dive into the industry’s specific challenges. 

Experts from around the world shared insights on the absorbent hygiene product (AHP) markets, particularly in developing countries, where local players are thriving by embracing agility and sustainability. A separate session focused on the wipes sector, where speakers from Water UK, Euromonitor International, and Suominen Corporation underscored that collaboration, innovation, and credible claims are key to a sustainable future for the category. 

Sustainability in the Spotlight
Throughout the conference, sustainability was less of a buzzword and more of a central theme. Sessions provided practical guidance on navigating the EU’s Green Deal and securing funding for projects. A session on Green Claims in Practice was particularly vital, with representatives from the European Environmental Bureau, the TIC Council, and the European Advertising Standards Alliance offering clear advice on how to build consumer trust and avoid greenwashing. 

Innovation was also on full display, with HIRO Technologies’ groundbreaking MycoDigestible™ diaper capturing attention. The product, which uses plastic eating fungi to safely break down diapers, offered a glimpse into how biotechnology could create truly circular solutions. 

Looking Ahead: AI and the Future of Nonwovens 
The discussions also reached beyond today’s challenges to explore tomorrow’s opportunities. A keynote on Day 3 by Roover Consulting addressed the role of Artificial Intelligence (AI) in the industry. The session showcased real-world examples of how AI can boost creativity and accelerate product development, while also addressing the crucial need for responsible implementation. 

"OUTLOOK™ 2025 was a powerful testament to our industry's resilience and forward-thinking nature," said Murat Dogru, General Manager of EDANA. "The conversations were about leading the change. We saw an industry that is committed to turning regulation into a competitive advantage and using innovation to create a truly sustainable future."
"We saw an industry that is committed to turning regulation into a competitive advantage and using innovation to create a truly sustainable future." - Murat Dogru, General Manager of EDANA.
Networking with Budapest as the backdrop 

The value of face-to-face connection was a recurring theme. Beyond the formal sessions, OUTLOOK™ had many networking events, including a cocktail reception at the stunning Buda Castle. Participants valued the side discussions that happen during the conference: “The presentations are great, but the real magic of OUTLOOK™ happens in the hallways and at the evening events. This is where you get to meet the relevant people of our industry—and that’s invaluable.”

"The real magic of OUTLOOK™ happens in the hallways and at the evening events. This is where you get to meet the relevant people of our industry—and that’s invaluable.” - Participant at OUTLOOK™.

With a clear path forward and a renewed sense of purpose, OUTLOOK™ 2025 wrapped up, leaving delegates equipped with the knowledge and connections needed to navigate the evolving landscape. The dates for OUTLOOK™ 2026 were announced for September 22-24, 2026. 

After three days of facilitating meaningful exchange for numerous applications of technical textiles and nonwovens, Cinte Techtextil China 2025 concluded on 5 September at the Shanghai New International Expo Centre. Feedback across the fairground was highly positive, especially from first-time exhibitors and buyers who valued the platform’s capability to create new opportunities both in China and overseas markets. The fair attracted nearly 20,000 visits from 74 countries and regions – a 17% increase from last year, and, as the most comprehensive edition ever in terms of product categories, visitors had much to explore. Major fringe events, such as the China International Nonwovens Conference (CINC), Econogy Tour, Sustainability Forum, and AI Panel, linked innovation and sustainability with industry demands, maximising reach and business opportunities for participants.

As Asia’s only dedicated show for the full spectrum of technical textiles and nonwovens, Cinte Techtextil China 2025 hosted over 300 global exhibitors, and welcomed a wide range of visitors, including sourcing decision-makers, textile & mechanical engineers, product developers, researchers, and more. The fair saw a significant rise in visitor pre-registrations, with international numbers increasing by over 40% compared to the previous edition. VIP buyers from across the globe attended the fair, as did 14 visitor delegations with over 250 participants. Some of the leading brands included domestic representatives from Kimberly-Clark (China), Li Auto, Li Ning, and L'Oréal (China); and international participants from Lego System (Denmark), Norafin Industries (Germany), Rockline Industries (USA), and Toyoshima & Co. Ltd (Japan).

Among the returning exhibitors, key international players included AUTEFA Solutions, Lindauer DORNIER and Rowa Group from Germany, Fil Man Made Group from Italy, Graf + Cie and Swisstulle from Switzerland, Picanol from Belgium, and more. This edition also welcomed several newcomers, partly due to the incorporation of textile chemicals and dyes into this year's product categories. Key exhibitors making their debuts included: Serel Industrie (Belgium) and Proton Products (UK) in the European Zone; Wetekam Group in the German Zone; Dupre Minerals (UK) and Michelman (USA) in the Textile Chemicals and Dyes Zone; Huamao (Xiamen), BW Advanced Materials, Shanghai Shenda, and Zhejiang Kingsafe Group from China, JCT Industries Group from Malaysia, Vietnam Geotextile from Vietnam, and more.

To support the diverse array of exhibitors and visitors onsite, Cinte Techtextil China identified specific development areas and offered relevant fringe events to facilitate meaningful interaction. The Econogy Tour and Sustainability Forum promoted the industry’s eco-transition, with the latter sparking cross-sector discussions among academia, brands, and other industry players. On the innovation front, the AI Panel and the Innovation Product Award and Presentation provided forward-looking insights from various perspectives, helping the industry reshape its future.

Other events like the CINC, themed ‘Breaking the Deadlock and Reconstruction’, offered in-depth discussions and report presentations for the nonwovens industry to navigate upcoming challenges and opportunities. To harness the promising Mobiltech trend, the fair organised a Technical Innovation Exchange Conference on Automotive Textiles followed by a tour visiting related exhibitors. Interested parties could also enjoy live-streamed tours organised for in-demand sectors such as Medtech, Mobiltech, and Protech.

The next edition of Cinte Techtextil China will be held from 1 – 3 September 2026.

The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

By perfecting the detection of visual defects in fabrics, this digital solution enhances customer satisfaction, optimises production processes and reduces raw material consumption. The jury also chose to award a special prize to Green Worms, an Indian micro-enterprise that has set up a local waste collection and processing system. Recycling waste creates sustainable jobs for women from disadvantaged socio-economic backgrounds.

‘The jury members were impressed by the quality of the designs submitted by the companies selected for this edition,’ said Claudia Franz, Director of Brand Management Apparel Fabrics & Fashion at Messe Frankfurt. ‘By recognising the GoldenEye Smart Vision project and choosing to award a special prize to Green Worms, we are supporting innovative solutions that address today's major challenges,’ she added.

GoldenEye Smart Vision will benefit from a stand worth €2,800 at Avantex Paris 2026 and €1,000 offered by Messe Frankfurt France, plus €1,000 offered by Texpertise Network, the Messe Frankfurt Group's textile sector network, a one-year subscription to the VLGE creative solution (worth €30,000), one year of incubation at Foundry offered by IFA Paris (worth €4,500), a keynote speech at the Circular Textile Days event, and an article in Luxiders Magazine.

Green Worms will receive €1,000 from Texpertise Network, the Messe Frankfurt Group's textile industry network, a marketing package from Circular Textile Days, and a consultation offered by Jayne Simone Estève-Curé.

The final of the 8th edition of the Avantex Fashion Pitch competition, organised by Messe Frankfurt France, rewards the most innovative, sustainable and relevant projects for the future of fashion. Each of the eleven finalists for 2025 – Adirelounge, Ananas Fashion, CQ Studio, Delfi, Garment By, Green Worms, GoldenEye Smart Vision, Myth AI, Sequinova, Meddle, Style Shifter – had five minutes to convince the jury composed of Jayne Simone Estève-Curé, fashion and luxury expert consultant, Yoobin Jung, ventures associate sustainability at Plug and Play Tech Centre, Carol Hilsum, Investor & Tech Leader at Assembly Ventures, Claudia Frantz, Director Brand Management Messe Frankfurt, Rachel de Gooijer, Marketing Manager, Circular Textile Days.