From the Sector

• Technical Absorbents Limited (TAL) has developed a new grade of superabsorbent fibre (SAF) specifically for use within a new range of SAF nonwoven fabrics that are more resistant to shrinkage.

The new SAF was developed in response to the demand from the medical industry for a superabsorbent fabric suitable for use in advanced wound pad dressings. The fibre had to be capable of withstanding the moisture used in the EtO sterilization process that is frequently employed in the production of the pads, in order to ensure product safety and compliance.

EtO sterilization is a low-temperature process (typically between 37 and 63°C) that uses ethylene oxide gas to reduce the level of infectious agents. While generally applied in gas form, however, the EtO is usually mixed with other substances – and often steam.

“Obviously superabsorbents and moisture generally aren’t a good combination at this stage in processing and can cause problems,” says TAL Product Development Director Dr Mark Paterson. “Other methods can be used, but when silicone materials are included, which is more frequently becoming the case, EtO is the preferred treatment method. Regular SAF grades tend to shrink a little and can become hard, which is often not desirable. This innovative SAF grade significantly reduces such potential problems.”

The amount of shrinkage caused by EtO sterilization depends very much on the product design and construction, he adds, but in general, the new SAF has been tested and proven to reduce fabric shrinkage by around 70%. It is suitable for use in all SAF nonwoven formats, whether needlepunched, thermally bonded or airlaid.

While the proprietary process developed at TAL for the production of this new fibre and resulting fabrics was prompted by the specific requirements of wound pad dressings, TAL sees opportunities for its application in other areas as well.

“It’s an extremely flexible fibre that can be easily switched with existing SAF grades when manufacturing fabrics and we have a number of current projects in which we’re exploring other end-uses,” Mark concludes. “We believe this new range could also open up entirely new application areas on the market.”

• Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
• With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

• RUDOLF GROUP is thrilled to unveil the perfected antiviral features embedded in RUCO®-BAC AGP, the Company’s flagship antimicrobial product for textile applications.

As a consequence of COVID-19 global pandemic the demand for chemical auxiliaries with antimicrobial effect has boomed. RUDOLF GROUP invested important resources in the meticulous assessment of a new antiviral feature which is now added to one of their leading technologies .

Such an effort returned the surprisingly fast and most comprehensive antibacterial and antiviral textile finishing on the market: RUCO®-BAC AGP.

History has led to great vision and innovation

The powerful antimicrobial effectiveness of RUCO®-BAC AGP is rooted in the extraordinary properties of silver, whose antimicrobial magic is lost in the mists of time. Already known by the ancient Romans, Greeks and Egyptians, water and milk were preserved by using silver coins through the early modern age.

R&D at RUDOLF GROUP has mounted silver on highly sophisticated, functional and registered microstructures that strengthen and amplify the qualities of this noble metal.

RUDOLF’s proprietary microstructures are the responsible hidden secret and key technical breakthrough behind both efficacy and durability of RUCO®-BAC AGP. This innovation is now the preferred solution to help reducing proliferation and cross-contamination of bacteria and enveloped-virus on textiles.

One gram of microstructures has the astonishing superficial area of about 60 m². The advantage of a much higher surface is that the consumption of resources and dosages can be minimized by the factor 100 and that makes RUCO®-BAC AGP a highly conscious choice.

“Due to the microstructures, a virtually infinite protective shield is created in the textile from which highly effective positive silver ions are set free in small, exactly dosed quantities” says Dr. Dirk Sielemann, R&D Director at Rudolf Group.

Taking performance to the next level

RUCO-BAC AGP effectively protects any textile against bacteria (harmful and odour-causing) and its superior antiviral performance on textiles has been independently demonstrated by applying the most modern testing methods. Assessments were carried out on enveloped Coronaviridae families known to cause a broad spectrum of animal and human diseases.

The microstructures in RUCO®-BAC AGP trigger their powerful antibacterial and antiviral effects based on 3 distinctive inhibiting mechanisms:
1.    Blocking of oxygen-transporting enzymes therefore leading to impaired growth;
2.    Crushing of disulfide bonds and therefore structure of sulphur-containing proteins.
3.    Possible interference with Bacteria and virus surface protein in the membrane.

RUCO®-BAC AGP is intended for the protection of the treated textiles and the microstructures of RUCO®-BAC AGP were studied thinking of performance and safety. It is suitable for next-to-skin applications and cytotoxicity tests show that RUCO®-BAC AGP has no influence on the natural microflora of the skin. Furthermore, because of the adhesion mechanism of its microstructures, RUCO®-BAC AGP is only active in/on the textile and it is non-migrating. 

“This year 202o is being highly emotional and it’s leading to the widespread introduction of antimicrobials on textile and to a myriad of vague, misleading or unsubstantiated marketing claims”, states Dr. Gunther Duschek, Managing Director at RUDOLF GROUP. He concludes “As a highly responsible company, we move cautiously and stand for technologies and practices that are effective, truthful and limit the exposure of apparel manufacturers, retailers and buyers to any risk”.

On June 22, the VDMA starts a series of Textile Machinery Webtalks. In the first edition experts from the companies Oerlikon Manmade Fibers, Mahlo and Nanoval will present technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks). After the presentations, the experts will be available to answer the participants' questions. The webtalk will run from 2 – 4 pm (German time). Participation is free of charge. Interested persons can register here. 

Further technology webtalks on other topics are in preparation. Please check 
www.machines-for-textiles.com/webtalk for updates.
 

• "Even closer to our customers"

After more than eight years in the Intercontinental Business Center on Yutong Road in Shanghai, China, the Manmade Fibers segment has now opened a new sales and service office in the metropolis of millions near the international airport in Hongqiao and the National Exhibition and Convention Center (NECC).

The Manmade Fibers segment in China now officially operates under the following address:

Oerlikon (China) Technology Co. Ltd.
Shanghai Branch
RM1208-1210, Tower A, The Place,
100 Zunyi Road, Changning District
Shanghai China 200051

The main reason for the change from Yutong Road to the new address on Zunyi Road was the logistical aspects in a city that has had to cope with increasingly heavy traffic in recent years. "Now we are even closer to our customers," explains Wang Jun, Oerlikon China President. The proximity to Hongqiao airport and the Hongqiao railway station with its high-speed trains will provide the sales and service staff with even better infrastructure connections.

Furthermore, the local repositioning also takes into account the changes within the Oerlikon Group. "The divestments made within the Oerlikon Group in recent years have now led to a reorganization here in Shanghai. Today, Oerlikon's business activities in China focus exclusively on the segments Manmade Fibers and Surface Solutions incl. Additive Manufacturing. The time had come to set up the best possible infrastructure for optimum customer service for both business segments," continues Wang Jun. In addition, in the age of digitalization, sales and service employees in China are increasingly able to work from home. All of this has now led to a changed, adapted and, last but not least, cost-optimized reorganization.

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

“We’re pleased to collaborate with Sateri as one of their first brand partners for FinexTM. Sateri’s dedication to this partnership made it possible for Lafuma to produce T-shirts with this fine quality fibre in a short time. T-shirts made with FinexTM will be among the offerings Lafuma has in store for the 618 festival as we look to support environmentally-friendly and excellent performance solutions to strengthen our position as a leading outdoor apparel brand,” said Wu Qian, General Manager of Lafuma China.

Echoing similar sentiments is Rico Lee who established his own independent label in 2014, “I jumped at the opportunity to collaborate with Sateri when they approached me because FinexTM encapsulates what my brand stands for – Beautiful Technology that combines function and fashion.”

Tom Liu, Sateri’s Commercial Vice President said, “Like our flagship brand EcoCosy®, FinexTM is made from bio-based natural fibres. Innovation and technology has made cellulosic textile fibre recycling possible and FinexTM represents how nature not only renews itself but that products made from nature can also be regenerated. This, at its heart, is what circular fashion looks like. Our brand promise to customers remains constant– Sateri’s products are sustainable, high quality, efficient, and cost-effective. The FinexTM tagline ‘Together For A Better Next’ expresses our aspiration to be the partner of choice for next-generation fibre - we thank Lafuma and Rico Lee for pioneering with us on this quest.”

Last month, Sateri announced its entry into China’s Lyocell fibre market. The recent string of product portfolio expansion announcements is underpinned by Sateri’s business strategy to capture value. Allen Zhang, President of Sateri said, “Being the world’s largest viscose producer gives us the advantages that come with volume, but value is what we hope differentiates us. By this, we don’t only mean higher value products like Lyocell or FinexTM but also the value we bring to communities, country, climate and customers.”

Globally, less than 1% of material used to produce clothing is recycled into new clothing. This presents a big opportunity for textile fibre recycling, particularly in China which is the largest textile producing country in the world. Last month, Sateri became a council member of the China Association of Circular Economy (CACE). The company will work closely with CACE’s Textile Waste Comprehensive Utilisation Committee to establish standards and promote industrial-scale textile waste recycling. Sateri is part of the Singapore-based RGE group of companies which has committed USD200 million into next-generation textile fibre innovation and technology.

• AACOMA - Accelerate advanced composite manufacturing
• EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

The Euregio Meuse-Rhine is a potential hot-spot for the further development of advanced material and process technologies. Technical Centers and Institutes around Aachen/Germany, Liège/Belgium and Eindhoven/The Netherlands were awarded with this new project AACOMA.

Innovative material design and advanced manufacturing provide large opportunities for SMEs. The AACOMA project kick-off took place in Aachen at the Campus of the RWTH University of technology in 1 Q 2020. The aim of the project, which is running for 3 years until 2023 with a budget of €3 Mio, is to connect SMEs with innovation hot-spots like institutes and technical centers.
Seven partners from all three regions will carry the project out: Centexbel is the project leader and gets support by University of Liège, Sirris and Flanders Make from Belgium, as well as Fontys University of Applied Science and AMIBM of Maastricht University in the Netherlands and AMAC in Germany.

Statements

Bernard Paquet, Project Coordinator from Centexbel/ Belgium stated:
“Centexbel, with a strong experience in textile and composites, will identify with its Interreg partners and an advisory board of international experts several demonstrators which will enable an accelerated advanced manufacturing of composite parts. This could include new materials and intermediates, high performance additives, bio-based products and new composites by additive manufacturing”.

Michael Effing, Managing Director of AMAC/ Germany said:
“The major goal of the project is to connect around 200 innovative SMEs with each other and establish the links to the world-class institutes in the EMR region. We will facilitate 6 roadshow events, addressing key topics like automated manufacturing, additive manufacturing or bio-based material systems combined with match making and training events. The first roadshow will be held on September 24, 2020 at the Aachen Campus of the RWTH University of Technology.”

Prof. Gunnar Seide from the AMIBM/The Netherlands continued:  
“Our AMIBM offers already an international master program on bio-based materials. The AACOMA project will be an important element for transborder research and will identify new players in the value chain coming from the EMR region. Innovative companies find markets for their new bio-based building blocks, chemicals and polymers. Their success stories and upcoming technological breakthroughs are needed for a sustainable future.”

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

• New composite e-Mobility application
• Multi-year substantial contract

After prototypes for a Chinese automotive manufacturer, a major order from a North American automaker, and yet another order for a European sports car manufacturer, SGL Carbon has now been nominated by BMW Group to produce a cover component for battery enclosures in series. This substantial multi-year order will include the production of an innovative glass-fiber-based cover plate for the battery housing for usage in a future plug-in hybrid model of BMW Group.

Materials made of composites are suited for battery enclosures for different reasons: Besides their light weight, which enhances the electric vehicle’s range, fiber-reinforced plastics offer high stiffness. In addition, they meet high requirements for water and gas tightness and feature excellent fire protection properties. Composite materials can also help to achieve improved structural stiffness of the underbody, e.g. to protect against penetration, as well as an optimized thermal management. Carbon fibers are ideal for especially stressed structures or load-bearing elements, such as the underbody panels and side frames. For components subjected to less stress, such as battery box covers, glass fibers or a fiber mix may suffice.

In addition to the new application for the hybrid model battery enclosure, SGL Carbon will continue producing the usual components made of carbon-fiber-reinforced plastic for the BMW i3 and delivering materials for the Carbon Core body of the BMW 7 series, and has been nominated as the supplier for all carbon materials - fibers, textiles, stacks - for the BMW iNEXT, set to be launched in 2021.

Less wear and superior fiber quality

Technological changes to Oerlikon Neumag’s Baltic crimper thrust pad contacting device have resulted in considerably reduced friction in the crimper rolls and hence less wear and fewer metal particles contaminating the crimped staple fibers.

Thrust pads close the gap between the crimper rolls on either side. Normally, these thrust pads are continually pressed – under high pressure – against the sides of the crimper rolls. Wear and metal debris on the thrust pads is the result of this constant contact. The metal debris can contaminate the fibers, something that is particularly undesirable in hygiene applications.

New thrust pad contacting device for reduced metal debris and greater durability
With the new system, the thrust pads are pressed against the rolls with less pressure and then fixed into place. This prevents fibers from being caught and the frictional force between the pressure disk thrust pad and the crimper roll is minimized. Pilot applications have demonstrated that metal debris from the pressure disks thrust pads is dramatically reduced, making them between three and seven times more durable.