From the Sector

• Since the end of March 2020, COVID-19 has led to very low demand in all Business Groups
• Comprehensive crisis management implemented
• Loss in the mid double-digit million range expected in the first half of 2020
• Plans to introduce short-time working to adjust capacity in Switzerland and Germany
• Strategy will continue to be implemented

Due to COVID-19, a large number of spinning mills have stopped production worldwide. Since the end of March 2020, this has led to low demand for spare parts and wear & tear parts and delays in testing programs during the development of new machines. Customers are postponing investment projects or unable to implement them due to restrictions imposed by national governments. This results in low demand for new machines.

Comprehensive crisis management
Rieter has implemented comprehensive crisis management. Priorities are being given to protecting employees, fulfilling customer commitments and ensuring liquidity. The necessary measures to protect employees have been implemented worldwide.
The order backlog of well in excess of CHF 500 million is being processed largely according to plan, despite the existing bottlenecks in the supply chains. Less than 5% of the orders in the order backlog have been canceled.
Rieter has already implemented measures to ensure liquidity and reduce costs. The company has good net liquidity and undrawn credit lines in the mid three-digit million range.
Loss expected in the first half of 2020
As already reported, Rieter expects sales and earnings in the first half of 2020 to be significantly below the prior year level.

Loss expected in the first half of 2020
As already reported, Rieter expects sales and earnings in the first half of 2020 to be significantly below the prior year level. The effects of COVID-19 will place an additional burden on the first half of 2020. Rieter therefore expects sales in the first half of 2020 to be less than CHF 300 million. Despite the countermeasures implemented at the net profit level, this will lead to a loss in the mid double-digit million range.

Plans to introduce short-time working to adjust capacity
Rieter plans to apply for short-time working for the areas with forecasted low capacity utilization at the locations in Switzerland and Germany. The application will be for 40% short-time working in the third quarter of 2020. Talks with staff representatives will begin next week.
As a sign of solidarity, Rieter’s Board of Directors, Group Executive Committee and the senior management will waive 10%-20% of their salaries temporarily.

Implementation of the strategy
In recent years, Rieter has consistently implemented the strategy based on innovation leadership, strengthening the business in components, spare parts and services and the adjustment of cost structures. The company intends to forge ahead with the implementation of the strategy in the coming months, thus strengthening its market position for the time after the COVID-19 pandemic.
The next information on the course of business is planned with the publication of the half-year results on July 16, 2020
 

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.
Here, the meltblown technology from Oerlikon Nonwoven will be deployed. In a special, patented process, the fibers laid into a nonwoven fabric during manufacture are subsequently electrostatically-charged, before the material is further processed downstream.

European market for protective masks with a promising future
Those responsible at Oerlikon Nonwoven and FleeceforEurope, which will primarily focus on producing high-end nonwovens, and Lindenpartner, which will manufacture and distribute the protective masks, are certain of one thing: the market for protective masks has a very promising long-term future in Europe.
What has been commonplace in Asia for many years now will also become normal in Europe. People will be increasingly wearing face masks when venturing out, in order to better protect themselves against health risks such as the current pandemic and also against increasing environmental pollution in the form of  fine particles and exhaust fumes in the future. A

Medical face masks from a vending machine
Mask producer Lindenpartner has already secured supplies of nonwovens and will be producing face masks for the European healthcare sector over the coming weeks. To fight the coronavirus pandemic, Lindenpartner is planning to install 100 self-service face mask vending machines in Germany over the next four weeks, positioning them in publicly-accessible places such as shopping centers and airports, for example.

STAMFORD – German ultralight aircraft specialist Flight Design has chosen Hexcel as its key supplier adopting low-temperature curing prepreg into its aircraft production. Hexcel’s HexPly® M79 Carbon Fiber prepregs deliver a more consistent final product by ensuring constant material quality and processing parameters and produce a lighter and stronger aircraft at a more competitive overall cost.

Flight Design has always relied heavily on composites for its aircrafts’ ultralight construction and turned to long-term composite materials partner Lange + Ritter, part of Hexcel’s European distribution network, when they began searching for a prepreg material solution. Hexcel and Lange + Ritter created several new product codes specifically for Flight Design and then supplied materials for initial handling trials and prototyping. Hexcel’s HexPly M79 low temperature curing out of autoclave solution was first used in the new F2 prototype. As part of its material supply package, Lange + Ritter also sent a team for on-site training and technical support, allowing the Flight Design production team to get up to speed with prepreg as quickly as possible.

HexPly M79 prepregs can be cured at temperatures as low as 70˚C for eight hours or 80˚C for four hours, reducing tooling costs and increasing build rates. When combined with Hexcel’s innovative air venting Grid Technology, HexPly M79 UD carbon tapes can also be laminated with reduced debulking steps to produce void contents <1% irrespective of laminate thickness. With consistently low void contents and improved mechanical properties, designers and engineers are able to further optimize highly loaded composite aerostructures.

As more and more of its composite aircraft parts are transferred to prepreg technology, Flight Design is seeing the benefits of its switch to HexPly M79. Lay-up is cleaner and more precise, low temperature oven curing is quick and energy efficient, and the manufacturing process consistently outputs exceptionally high-quality laminates and components. The long-term strategy is to integrate HexPly M79 across the range, with Hexcel materials lightening the ultralight aircraft at Flight Design even further.

“The materials and technology package from Hexcel and Lange + Ritter has been a big success for us at Flight Design,” comments Daniel Gunther, Managing Director at Flight Design. “When we took the decision to switch to prepreg, we looked at many options but only Hexcel and Lange + Ritter could offer us low temperature out-of-autoclave (OOA) curing, globally respected material quality and the customer service levels we were searching for.”

Within the context of a globally-networked textile industry, online services have become essential for maintenance, modernization and original parts procurement processes for machines and systems.
Here, the Oerlikon Manmade Fibers segment optimized the myOerlikon.com service portal for the products and services of its Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands, making it more userfriendly. It allows customers to now access tailored services in nine different languages and around the clock.

Each and every machine park usually has numerous associated documents, ranging from manuals, circuit diagrams and 3D drawing-supported original parts catalogs, all the way through to operating instructions and final documents. myOerlikon.com bundles this information, while also providing users with additional communications on potential machine modernizations and upgrades and on special offers tailored to the respective production system.

Real security during virtual shopping
At the same time, users can access the myOerlikon.com e-commerce platform, which operates in parallel.
Customers can not only place orders here, they can also send online inquiries to Oerlikon, view prices and warehouse stocks and track inquiries,
quotations and orders already made or placed, among many other things. As a result of online access to original parts catalogs for the respective customer machines and systems, erroneous orders can be avoided.
Log-in is secure for users, as are all transactions carried out using the platform. With this, Oerlikon is implementing real security for all virtual purchases. All data exchanged is fundamentally
encrypted and hence protected against unauthorized access.

Textile and nonwoven associations issued a joint statement today urging federal, state and local governments to deem textile and nonwoven manufacturing facilities as “essential” when drafting “Shelter in Place” orders in response to the COVID-19 crisis.

Our associations recognize the serious challenges our elected officials, health administrators, and others are facing when issuing orders to protect communities across the country and we understand the necessity for leaders to enforce a ‘Shelter in Place” order or quarantine orders.

Our members make a broad range of inputs and finished products used in an array of personal protective equipment (PPE) and medical nonwoven/textile supplies, including surgical gowns, face masks, antibacterial wipes, lab coats, blood pressure cuffs, cotton swabs and hazmat suits. These items are vital to the government’s effort to ramp up emergency production of these critical supplies.

If workers who produce these goods are not granted an “essential” exemption from “Shelter in Place” and other quarantine orders to go to their manufacturing and distribution facilities, it will cause major disruptions in the availability of these goods. This will create significant hardship to healthcare providers and consumers across the country who depend on steady and stable supplies of these critical items.

We are asking the administration and state and local authorities to provide greater certainty and clarity for our companies and employees and ask for a clear exclusion of our manufacturing operations from “Shelter in Place” orders as the textile and nonwoven products that we make in the U.S. play an essential role in mitigating the shortages of critical supplies. Such a designation will help us avoid disruptions of vital goods and services during this challenging time.

A close eye on quality with the Eye Compact II

Eltex of Sweden AB, a member of TMAS, the Swedish textile machinery association, reports solid success with its Eye Compact II yarn monitoring system for carpet tufting machines, since its launch at ITMA 2019 in Barcelona last June.

The sensor units of the Eye Compact II,Brian Hicks, Eltex CEO explains, have been successfully miniaturised to approximately a third of the size of those with the established Compact system, allowing them to be mounted on the very latest high speed tufting machines that are graphics driven, with limited space at the puller rollers.

Early stage prevention
Unlike the sensor systems that are employed at later positions on tufting machines – in order to detect faults in the formed fabric – Eye Compact II technology is about prevention at an earlier stage, through the detection of missing yarns.

Critically, the sensors need to be installed after the last puller roller and before the tufting needles, because otherwise the roller could still be feeding yarns that will not been successfully taken by the needles. This is only possible with the extremely slim Eye Compact II units, which can also be positioned either above or below the rollers.

Guarantee
Another benefit is that the sensors can be arranged more closely together, with each of them monitoring 16 yarn positions, and their robustness ensures that once fitted, there is little the technicians or operators need to do.

Automatic
The Eye Compact II system easily learns pattern changes and displays the number of yarns involved to the operator for confirmation, and different parameters for different yarns groups can also even be set if required. With its research and development work primarily carried out at its headquarters in Osby, Sweden, and North American sales and service operated from its subsidiary in South Carolina, the manufacturing plant of Eltex has been located at Templemore in Ireland since 1976, providing significant advantages in terms of high flexibility and logistical services to customers on both sides of the Atlantic.

Leading fashion and textile industry training centre offers UK professionals hands-on experience with 3D digital design tools
 
EFI™ Optitex®, Electronics For Imaging's global provider of integrated end-to-end 2D & 3D CAD/CAM software solutions for the fashion and apparel industry, today announced its partnership with Fashion Enter Ltd. (FEL), a UK training and technical skills development centre for the fashion and textile industry. FEL has implemented EFI Optitex 3D solutions into its course curriculum.
 
Established in 2006, London-based FEL is a veritable "all-in-one" technology hub for the fashion and textile industry, offering multiple training and technical skills development services encompassing the entire design to production cycle. A not for profit, social enterprise, FEL also provides apprenticeships and adult learning through an Educational Skills and Finding Agency- and Social Enterprise London-approved technical centre supported by Haringey Council, Mayor's Good Growth Fund and online fashion retailer ASOS®.
 
To help lay the foundation for the UK's fashion and textile industry on its imminent journey towards digital transformation, FEL was determined to close the mounting skills gap in both industry and academia and offer UK professionals hands-on experience and exposure to 3D digital design tools. With a keen understanding of the market's growing need for speed, flexibility and shifting demands, in September 2019, FEL selected EFI Optitex as its 3D technology partner. FEL sought advanced 3D solutions that would enable innovative digital design courses, apprenticeships and bespoke training, including collaboration with leading fashion retailers such as Marks & Spencer®, ASOS, Next®, and many others.
 
After a short but highly intensive training period FEL implemented EFI Optitex 3D into its design and production processes, including pattern design and 3D tools for design and fitting. Since the recent implementation, FEL has already reaped the benefits of EFI Optitex 3D fully digital design, from sampling and grading, through to production. During a preliminary implementation phase, EFI Optitex 3D will enable FEL to deliver a wide range of accredited 3D design courses and forge collaborations with new customers, a result of EFI Optitex 3D's intuitive design tools, ease of use, and time and resource savings.

Riri and Coeurdor announce that they are creating the largest metal accessories group dedicated to the high-end luxury brands. The combination of the two companies will result in a unique value proposition, offering the full range of metal trims. This will allow luxury brands to simplify their supply-chain and benefit from unique innovation capabilities, including new technology like 3D printing and stainless steel. They will also rely on a production network that spans from France, Italy, Switzerland to Portugal, offering maximum flexibility and security of supply adapted to the fashion market requirements.

Founded in 1951 and headquartered in Maîche (France), Coeurdor is a manufacturer of metal accessories for the luxury industry. The company is specialized in surface finishings and manufacture of metal products for Luxury leather goods, with production facilities in France and Portugal. The company is well-known for the quality of its products, its innovation capabilities and strong customer relationships.

Founded in 1936 and headquartered in Mendrisio (Switzerland), Riri is a well-known brand, producing zippers and buttons, through Riri and Cobrax brands, mostly for the high-end luxury market. Riri is the privileged choice of many brands in light of high quality of the creations released season after season, ever-ending effort in terms of innovation, personalization of details and high service levels. The company has a world commercial presence, with commercial offices in Paris, New York City, Los Angeles, Hong Kong and Shanghai and four manufacturing sites across Switzerland and Italy.

Robert Jeambrun, Chairman of Coeurdor said: “We are very excited to open this new chapter of our history together with Riri. We believe the two organizations share the same values, including a focus on innovation and dedication to high service levels for our customers. Crossing our path with Riri will enable us to continue our growth story and increase our financial means, becoming the supplier of choice of high-end luxury brands.”

Renato Usoni, CEO of Riri Group said: “We are welcoming the Coeurdor family. The alliance of the two groups will create a new leader in the market with a unique business model and industrial means capable of supplying all metal pieces needed by our clients, from zippers to buttons and metal trims, all at once. The combined offering will be highly synergetic and will allow our clients to better industrialize their supply chains and benefit from unique innovation capabilities.”

     Experienced people-centric leader to strengthen product and service capabilities

The leadership team of Baldwin Technology Company Inc. has appointed Joe Kline as its new President and CEO, effective January 17, 2020. Baldwin is a leading global manufacturer of innovative process-automation technology for the printing, packaging and converting industries. Acting CEO Kyle Chapman will continue as Baldwin’s Chairman, and devote greater focus to BW Forsyth Partners’ rapidly expanding portfolio. In 2012, Forsyth acquired thenpublic Baldwin and took it private.

Prior to joining Baldwin, Kline served as the president of a division in Eaton’s electrical sector. In addition, his previous experience includes commercial leadership roles at Eaton, Duke Manufacturing and Emerson. He holds a bachelor’s degree in electrical engineering from Ohio University and a Master of Business Administration in international business from Saint Louis University.

Kline’s appointment follows the 2019 appointments of four Baldwin business segment presidents: Rich Bennett at AMS Spectral UV, Tomas Anderbjer at Baldwin Precision Applications, Vince Balistrieri at Baldwin Vision Systems, and Matt Shishikura at Baldwin Japan.

• Flexographic printing press includes award-winning SteadyPrint anti-bounce technology

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, has announced the sale of a second Fusion C printing press to Legacy Flexo Corp. in Green Bay. “We are excited to be purchasing a second Fusion C flexographic press,” said Dan Aberly, Operations and Sales, Legacy Flexo. “We’ve experienced a lot of success with our first Fusion C, which has allowed us to offer our customers more efficient runs. The fact that PCMC has been a true partner with us, providing exceptional quality and service, and is local to us were also deciding factors.”

The Fusion C has a smaller footprint with fewer parts, but incorporates many fast make-ready and waste-saving features, including the innovative SteadyPrint technology. Winner of the 2019 FTA Technical Innovation Award, SteadyPrint significantly reduces the effects of bounce when printing graphics with hard edges due to its bearing arrangement, which is coupled with an algorithm utilizing noise-canceling technology. With patents pending on all features, SteadyPrint is currently the only product on the market using this kind of technology to eliminate disturbances and provide real-time monitoring.