From the Sector

The Organic Cotton & Textiles Conference, taking place in Indore, India over three days, from February 27-March 1^st is set to bring together a diverse group of key players from every part of the textile supply chain. Farmers, farm groups, industry representatives, non-profits, academics, suppliers, brands, certifiers, government representatives and policymakers will join nearly 200 guests at the multi-day event. The aim is to foster collaboration, explore innovative ideas, listen to those on the ground and focus discussions to develop a shared vision to boost the organic textile supply chain worldwide.

Co-hosted by  OCA, GOTS, and IFOAM - Organics International, the conference will address a range of subjects including social conditions, transparency through innovation, scaling up organic through investment, as well as sessions tackling certification, decent work and environmental impacts. The event also gives voice to farmers, who join as panellists, in a dedicated Q&A session with seven organic cotton farmers from the region. On the third day, organised by OCA, the organic farmers will welcome attendees to their communities during field trips west to Petlawad to witness organic practices at ground level.

“By addressing these important issues and fostering a dialogue between participants, the conference aims to develop innovative solutions that can drive progress and growth in the sector", says Bart Vollaard, Executive Director of OCA. "We are thrilled to be joining forces with GOTS and IFOAM to create positive change in the organic textile sector."

“Together with IFOAM - Organics International and OCA, GOTS wants to increase visibility of organic and at the same time enhance integrity of organic fibres and textiles. This conference shall serve to strengthen the sector by addressing obstacles and work on effective solutions, in consultation with all relevant and committed stakeholders”, notes Claudia Kersten, Managing Director of GOTS.

Sarah Compson of the IFOAM - Organics International World Board adds “Organic agriculture directly addresses some of the most pressing challenges of our time. IFOAM - Organics International is delighted to collaborate with OCA and GOTS to bring together people from across the whole textile sector and address the barriers and opportunities for scaling organic cotton production worldwide.”

With a strong line-up of notable speakers and guests in a supportive and engaging atmosphere, and a unique approach that connects participants from every step of the supply chain, the Organic Cotton & Textiles Conference is set to be a valuable and transformative event for key stakeholders involved in the organic textile industry.

NatureWorks, the manufacturer of low-carbon polylactic acid (PLA) biopolymers made from renewable resources, hosted a cornerstone laying ceremony to celebrate construction of their new Ingeo™️ PLA manufacturing complex in Thailand. The ceremony which took place on February 1st, 2023 commemorated the progress made to date on the new fully integrated biopolymer facility. The day also featured a ceremonial groundbreaking that mirrored the ceremony held in Blair, Nebraska, USA in 2000 when NatureWorks began construction on the world’s first commercial scale PLA manufacturing facility.

The new manufacturing facility located on the Nakhon Sawan Biocomplex (NBC) in Nakhon Sawan Province, Thailand is designed to be fully integrated including production sites for lactic acid, lactide, and polymer. With completion expected in the second half of 2024, the manufacturing site will have an annual capacity of 75,000 tons and will produce the full portfolio of Ingeo biopolymer grades.

The expanded global production of Ingeo biopolymer will support growth in markets including 3D printing and hygiene as well as compostable coffee capsules, tea bags, flexible packaging, and food serviceware that demand sustainable, low-carbon biomaterials and require the high-performance attributes that Ingeo is uniquely suited to deliver.

“This ceremony is a meaningful milestone for the entire NatureWorks team,” said Rich Altice, president and CEO of NatureWorks. “For the last three decades, we have not only been building a company and manufacturing facilities, but also a whole new industry and market for low-carbon, renewable biomaterials that are revolutionizing the sustainability and safety of packaging and product materials used in our everyday lives.”

Avgol®, a manufacturer of high-performance nonwoven fabric solutions, will use this month’s FILTECH exhibition in Germany to showcase its latest developments in using Algaeing™’s patented algae bio-based formulations for colorants and fibers.

Together with its sister companies from Indorama Ventures Limited (‘IVL’), Avgol will be presenting biotransformation capable fibers and meltblown for diversified end-use markets at the event from 14-16 February. Avgol will discuss with visitors how this new technology and the company’s biotransformative products can help businesses achieve their 2030 sustainability goals.

Algaeing’s technologies utilize various sustainably sourced, vertically farmed algae species to produce a wide range of appealing colors, many of which replicate the colors used in nonwoven fabrics today.

“The benefits of using an algae bio-source go far beyond the removal of chemically synthesized colorants, and include synergistic benefits of vastly reduced water consumption, chemical and fertilizer use, and carbon dioxide emissions,” says Avgol CEO Tommi Bjornman. “We will be demonstrating to FILTECH visitors that following an extensive development path, the fibers both absorb and retain a range of colors - such as vibrant greens and blues – and that we can even deliver a ‘heathered’ appearance for a more natural looking material, all without affecting the filtration, barrier quality or feel of the final product.”

Die Epson Deutschland GmbH startet im April in ihr neues Geschäftsjahr 2023/2024. Trotz der gesellschaftlichen und politischen Einschnitte im letzten Jahr und der daraus resultierenden Unsicherheit in der Wirtschaft kann das Unternehmen auf eine stabile Entwicklung im noch laufenden Geschäftsjahr verweisen und blickt optimistisch auf das kommende. Basis hierfür ist die konsequent nachhaltige Ausrichtung des Technologiekonzerns und die Realisierung dieser Planungen. Das Ziel zu 100 Prozent mit Ökostrom weltweit in allen Produktionsstätten und Niederlassungen zu arbeiten, wird in 2023 erfüllt. Neue Technologien wie die Dry-Fiber-Technologie (DFT) und Metal Injection Molding (MIM) sind Ergebnisse einer Forschungs- und Entwicklungsarbeit, die den japanischen Konzern in Sachen Nachhaltigkeit zukunftsfähig aufstellen.

100 Prozent Ökostrom weltweit
2023 kann Epson einen wichtigen Meilenstein seiner Umweltvision erfüllen: alle Produktionsstätten und Vertriebsniederlassungen werden weltweit auf Strom aus erneuerbaren Energien umgestellt. Aktuell setzen bereits alle Epson-Standorte in Japan, in Europa und in einzelnen Werken im asiatischen Raum auf Ökostrom.

Umwelttechnologien: Recycling von Kleidung
Die einhundertprozentige Nutzung von Strom aus erneuerbaren Energiequellen ist Teil der Epson Umweltvision 2050. Eine weitere wichtige Säule dieses Programms ist die Entwicklung von Umwelttechnologien. Mit der Dry-Fiber-Technologie arbeitet Epson an einer Recyclingtechnologie, die bereits im Einsatz ist, zukünftig aber noch viel breiter Anwendung finden kann. Basis der Technologie ist die Zerlegung von Ausgangsstoffen in ihre Fasern, die sich dann auf verschiedenen Wegen wieder zusammenführen lassen. Auf dem Markt bereits erhältlich ist das PaperLab, Epsons Papierrecyclingmaschine, die aus altem Büropapier neues herstellt. Mit dieser Technologie lassen sich auch Textilien zerfasern und zu Stoffbahnen (Vlies) wieder zusammenfügen.

New Work in Düsseldorf
2023 wird überdies ein Aufbruchsjahr für die Mitarbeitenden in der Meerbuscher Vertriebszentrale. Nach 20 Jahren geht die Epson Deutschland GmbH wieder zurück nach Düsseldorf. Das Unternehmen hat ab dem Frühjahr 2023 rund 3.000 Quadratmeter im gerade im Bau befindlichen Gebäude TRIGON in Düsseldorf-Heerdt angemietet.

Techtextil India is scheduled to take place between 12 – 14 September, 2023 in Mumbai. The continued support from the Ministry of Textiles demonstrates the huge emphasis laid for this key sector in boosting the economy of the country given the enormous scope to grow rapidly apart from the remarkable opportunities present to do business in India.
 
Techtextil India is the country’s leading trade fair on technical textiles, non-wovens, fibres, yarns and machinery. With almost eight months to go, the three-day business event has received an overwhelming response from various companies who will be seen showcasing their latest solutions and products for key application areas.
 
Commenting on the developments, Mr Raj Manek, Executive Director and Board Member, Messe Frankfurt Asia Holdings Ltd, shared: “We are elated to have received the support from the Ministry of Textiles, Government of India and believe that it will bring in strong value to the technical textiles segment of our trade fair while opening doors to lucrative business engagements for the industry. We are optimistic that it will gain for us a wider reach and increase our credibility among the industry.”
 
The last edition of Techtextil India in November 2021 emerged as a crucial meeting place for the technical textile players. Even though the show happened to be the first post lockdown edition it garnered an attendance of 4,087 visitors due to live demonstration of latest products and technologies from over 150 technical textile brands.

Das STFI bietet unter dem Namen „STFI Akademie“ Module und Kurse zur Fachkräftequalifizierung und -weiterbildung an. Einige der Kurse sind in Grund- und Intensivkurse unterteilt.

Geleitet wird die Akademie von den langjährigen Instituts-Mitarbeiter Jens Stopp und Denise Braun. Die Akademiedozenten sind ausgebildete Fachleute in den verschiedenen technologischen Gebieten.

Die Verbundausbildung, die sich Unternehmen zum Teil durch die Sächsische Aufbaubank (SAB) fördern lassen können, richtet sich an Firmen, die Teile des Rahmenlehrplanes nicht allein abdecken können und so fachliche Unterstützung benötigen. Die Weiterbildung und Qualifizierung richten sich an Facharbeiter, die in ihrem Bereich eine Vertiefung ihres fachlichen Wissens anstreben bzw. ihren beruflichen Horizont erweitern möchten. Darüber hinaus sollen auch Berufs- und Quereinsteiger angesprochen werden, Fachwissen zu erlangen.

The viscose fibre manufacturer Kelheim Fibres - exclusively using FSC® or PEFCTM certified pulps exclusively from sustainably managed sources - welcomes the preliminary political agreement reached between the European Parliament and the Council on an EU regulation on deforestation-free supply chains. The new rules, adopted at the end of 2022, are intended to prevent goods that cause forest degradation or deforestation from being placed on the EU market.

As one of the largest economies worldwide, the EU is a major consumer of wood-based raw materials. Therefore, the new law can significantly contribute to reducing global deforestation and forest degradation as well as protecting threatened forest areas.

“Wood is an incredibly versatile and valuable renewable resource and the basis for countless products. Our viscose fibres are just one example – they offer an environmentally friendly alternative to synthetic materials in various applications and are thus a promising material for the future. Of course, this only applies if the production of our raw materials does not take place at the expense of our earth's natural forest resources. These forests are a bastion of biodiversity and climate protection for our entire planet and must be protected at all costs. No one can escape this responsibility," says Craig Barker, CEO at Kelheim Fibres.

Die AVK – Industrievereinigung Verstärkte Kunststoffe e. V. hat gemeinsam mit dem IKK, Institut für Kunststoff und Kreislaufwirtschaft der Leibniz-Universität Hannover, eine umfassende Studie zum Composites-Recycling erarbeitet.

Sie bietet eine systematische und umfassende Übersicht über die anfallenden Abfallmengen und die aktuellen sowie zukünftig verfüg- und umsetzbaren Lösungen zum hochwertigen Recycling. Dabei werden die Vor- und Nachteile zu den verschiedenen Verfahren bewertet sowie relevante gesetzliche Vorgaben und Normen betrachtet.

Das Thema Nachhaltigkeit und Recycling ist auch in der Kunststoffindustrie immer wichtiger geworden. Gerade im Bereich Leichtbau haben Composites enorme Vorteile. Darüber hinaus können die Materialien aber auch in Bezug auf Nachhaltigkeit einen hohen Mehrwert liefern. Warum Composites vorteilhaft sind, wurde bislang wenig systematisch oder eher punktuell untersucht. Mit der jetzt veröffentlichten Composites-Recycling-Studie, die vom IKK-Institutsleiter Professor Hans-Josef Endres und Dr. Madina Shamsuyeva mit Unterstützung von Industrievertretern aus dem AVK-Expertenarbeitskreis erarbeitet wurde, liegt die erste große Untersuchung zum Thema Recycling von Composites vor.

„Für Composites gibt es ein hohes Potential, auch wenn viele glauben, Faserverbundkunststoffe lassen sich schwer recyclen. Trotzdem darf man nicht vergessen, dass nicht alles, was beim Recycling möglich ist, auch wirtschaftlich oder nachhaltig ist. Hier gilt es genau hinzusehen. Diese Studie ist deshalb so wichtig, um herauszufinden, wie der aktuelle Stand ist, wohin sich der Markt entwickeln kann und wo noch Potential schlummert“, stellt AVK-Geschäftsführer Dr. Elmar Witten fest.

Prof. Hans-Josef Endres ergänzt: „Die Studie zeigt, dass in einigen Bereichen mehr recycelt wird, z. B. bei den Thermoplasten, in anderen Bereichen jedoch noch nicht. Gerade beim chemischen Recycling ist der Reifegrad der Technologien noch nicht sehr fortgeschritten und manchmal sind auch Anlagekapazitäten noch nicht ausgelastet. Hier muss noch Pionierarbeit geleistet werden, um z. B. interdisziplinäre Geschäftsmodelle auszuarbeiten. Gleichzeitig gibt es Anwendungen für Composites, die schon heute aus technischer Sicht einfach zu recyceln wären und es ‚nur‘ an der Logistik und dem Willen fehlt. Aber auch eine Harmonisierung von Gesetzen und Normen sowie der Rechtsprechung wäre wünschenswert, um das Composites-Recycling weiter voranzubringen.“

Die Studie ist zum Preis von 799,- Euro (zzgl. MwSt.) bei der AVK im PDF-Format erhältlich (ermäßigter Preis für AVK-Mitglieder: 399,- Euro zzgl. MwSt.).

Price Trends

• The nearby cotton futures contract on the Intercontinental Exchange was down just 1% in December and closed the year at $1.84 per kilogram. A year earlier, the March contract closed at $2.30 per kilogram.  
  
  Cotton futures have been inverted for nearly three years because of supply chain disruptions that prevented normal on-time deliveries of international shipments. With the easing of container shortages and increased sailings, cotton futures are gradually reverting to the normal pattern in which contracts for forward delivery exceed nearby contracts by the cost of insurance, storage and interest between delivery months. The May and July 2023 contracts also finished 2022 at $1.84 per kilogram. In November, the May and July contracts were each several cents per kilogram lower than the March contract.
• The Eastern Market Indicator of prices for fine wool in Australia rose 9% in December to US$9.06 per kilogram. A year earlier, the EMI was $9.66. Australian analysts note that sheep for meat, cattle, and grain production, are competing alternatives for the use of land, and wool prices must continue upward if production is to be maintained in 2023.
• Prices quoted by the Indian Jute Balers Association (JBA) at the end of December converted to US$ fell 2% from a month earlier to an average of 74 cents per kilogram. The decline occurred entirely because of a weakening exchange rate. Prices in Rupee rose marginally. A year earlier, quoted prices averaged 84 cents per kilogram. The 16-percent decline year-on-year was caused about equally by a decline in quoted prices in Rupee and a weakening of the exchange rate.  
  
  The Indian jute industry is almost entirely focused on domestic demand, while half of total demand in Bangladesh comes from exports. Because of shortages of higher quality jute, export prices in Bangladesh are reportedly rising.
  (https://www.wgc.de/en/produkte/jute)
  
  India extended the anti-dumping duty at the end of December on jute and jute products imported from Bangladesh and Nepal for a period of five years. Bangladesh had urged the Indian government not to accept recommendations for extension, while the Indian industry was lobbying to ensure the duty remained in place. The duty rates range from approximately $6 per tonne at current exchange rates for low-quality fibres to $350 per tonne for finished products. The duty was originally imposed in January 2017 and was to expire at the end of 2022.
• Prices of silk in China rose 2% during December to US$28.0 per kilogram. Prices in yuan fell marginally during the month, but the RMB rose 3% against the USD. Prices of textile-grade silk in China were essentially unchanged at the end of 2022 compared with the end of 2021. However, prices closed 2022 about 40% above the average level pre-Covid. https://www.sunsirs.com/uk/prodetail-322.html and  https://businessanalytiq.com/procurementanalytics/index/raw-silk-price-index/ .
• Coconut coir fibre in India quoted in US$ remained in a narrow range, averaging $0.205 per kilogram in December. Prices in Rupee have been stable, and changes in dollar prices reflect changes in the exchange rate.

 
Production
 
World Natural Fibre Production in 2022 is estimated as of early January at 32 million tonnes, approximately one million below production in 2021 and down 900,000 tonnes compared with the estimate in early December.

World cotton production is estimated at 24.2 million tonnes in 2022/23 (August to July), 700,000 tonnes lower than in 2021/22 (ICAC.org). World cotton production rose from 20 million tonnes to 25 million between 2020/21 and 2005/06, but there has been no growth in the nearly two decades since.  
 
World production of jute is forecast down nearly 400,000 tonnes in 2022 because of inadequate rainfall during the harvest period to permit proper retting. Production in India is estimated up by 100,000 tonnes to 1.7 million tonnes, but production in Bangladesh fell by nearly one-third to just one million tonnes.
 
Production of coir, flax and sisal in 2022 are each estimated based on recent trends. Coir and flax have each been trending upward over the past decade, while world sisal production has been largely stable.

World wool production is forecast up 5% in 2022 to 1.09 million tonnes (clean), the highest since 2018. The Australian Wool Production Forecasting Committee issued its third estimate of 2022/23 production in December, keeping the estimate unchanged from September. Above-average rainfall in Australia, and across most of the Southern Hemisphere, is resulting in better pasture conditions and a rebuilding of sheep numbers. Sheep numbers shorn in Australia are climbing from 67 million in 2020/21 to 72 million in 2021/22 and to an estimated 75 million in 2022/23. https://www.wool.com/market-intelligence/wool-production-forecasts/  
 
According to the International Sericulture Commission (https://www.inserco.org/), silk production in China dropped from 170,000 tonnes in 2015 to 53,000 in 2020, with further declines estimated during Covid. Consequently, world silk production dropped from 202,000 tonnes in 2015 to 92,000 in 2020, and estimates of production during 2022 remain below 100,000 tonnes.

January, 3rd, ZDHC announced the release of the updated ZDHC Man-Made Cellulosic Fibres (MMCF) Guidelines Version 2.0, and its supporting document. By publishing these documents the industry shall be pushed forward increasingly innovative and sustainable fibre production.

The ZDHC MMCF Guidelines V2.0 now include the Responsible Fibre Production Guidelines, Wastewater Guidelines and Air Emissions Guidelines as three separate chapters in a single document.

Fibres are key components of production processes in the textile and fashion value chain and it is crucial to reduce the environmental impact of their manufacture. ZDHC guidelines give suppliers producing MMCF unified criteria for measuring output indicators like wastewater, sludge, air emissions and other process-related parameters.

Among other changes, this update reflects the expansion of the scope to accommodate Viscose Filament Yarn, Lyocell, Cuprammonium Rayon (Cupro) and Cellulose Acetate (Acetate). The ZDHC Man-Made Cellulosic Fibres (MMCF) Guidelines V2.0 provide an aligned approach for included fibres, including defined chemical recovery, wastewater and sludge discharge, and air emission discharge.

ZDHC continues to advocate for the improvement of processes which minimise emissions while also working towards the recovery of input substances and by-products. These dual goals, reduction and recovery, directly address the negative impact of outputs arising from MMCF production.

ZDHC MMCF Guidelines Industry Standard Implementation Approach Version 2.0: Additional Industry Support for Implementation
Along with the ZDHC Man-Made Cellulosic Fibres (MMCF) Guidelines V2.0, ZDHC has also updated its ZDHC MMCF Guidelines Industry Standard Implementation Approach. This document aims to support the implementation process of the ZDHC MMCF Guidelines V2.0, and features new implementation timelines that assist suppliers in setting their goals to achieve Foundational, Progressive or Aspirational Level on the ZDHC Supplier Platform.