From the Sector

Reset
16 results
31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

24.02.2022

VDMA textile machinery webinar on sustainable dyeing involved Monforts, DyStar® and Goller

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes at a temperature of between 120-130°C and a relative humidity volume of 25-30%.

Benefits
The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step.

Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

Complementary services and systems
Complementing the Monforts presentation during the webinar, Bertram Seuthe, Global Business Development Manager at DyStar, outlined the importance of specific Levafix® /Remazol® reactive dyes and Dianix® disperse dyes for sustainable dyeing processes such as Econtrol®, Cadira® Continuous and CPB knit. In these processes Sera® auxiliaries are also employed for optimised wash-off results.

Guido Seiler, Area Sales Manager at Fong's Europe, also introduced the latest developments of the Goller brand for the washing process, which can reduce water consumption by between 10 to 20%, as well as reductions in both heating energy and waste generation, depending on the specific fabric construction and required shade.

Source:

Monforts  / DyStar Singapore Pte Ltd

06.01.2022

Monforts presents Econtrol® at VDMA Webtalk in February

Monforts textile technologist Jonas Beisel will outline the benefits of the company’s Econtrol® continuous dyeing process during the next free-to-attend VDMA Textile Machinery Webtalk which takes place on February 3rd 2022 at 13.00 (CET).

“Our customers are increasingly looking at shorter production runs and the more economical use of dyestuffs, as well as reducing water and energy consumption,” says Beisel. “We have gained many years of experience in the optimisation of dyeing processes through working with our customers, both at their own plants and in our Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

“Our Thermex universal hotflue for continuous dyeing, curing and thermosoling achieves unrivalled reliability even at high fabric speeds, for exceptional cost-effectiveness when dyeing both large and small batches of woven fabrics. The Econtrol® process for reactive dyestuffs now has an impressive number of references on the market, as a quick and economical one-pass pad-dry and wash off process. This is the ideal process for fast change technology and operational savings.”

Monforts textile technologist Jonas Beisel will outline the benefits of the company’s Econtrol® continuous dyeing process during the next free-to-attend VDMA Textile Machinery Webtalk which takes place on February 3rd 2022 at 13.00 (CET).

“Our customers are increasingly looking at shorter production runs and the more economical use of dyestuffs, as well as reducing water and energy consumption,” says Beisel. “We have gained many years of experience in the optimisation of dyeing processes through working with our customers, both at their own plants and in our Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

“Our Thermex universal hotflue for continuous dyeing, curing and thermosoling achieves unrivalled reliability even at high fabric speeds, for exceptional cost-effectiveness when dyeing both large and small batches of woven fabrics. The Econtrol® process for reactive dyestuffs now has an impressive number of references on the market, as a quick and economical one-pass pad-dry and wash off process. This is the ideal process for fast change technology and operational savings.”

Among key benefits are the saving of resources compared to conventional continuous dyeing methods, excellent reproducibility of pale to dark shades, from lab to bulk, and greater flexibility in production planning due to a resulting dry fabric that does not need an immediate wash off.

Econtrol® is a registered trademark of DyStar® Colours Distribution GmbH, Germany, and Bertram Seuthe of DyStar® will be providing recommendations for dyes and auxiliaries for the process during the VDMA event.

A third speaker, Guido Seiler of Fong’s Europe, will explain how Goller washing ranges help to significantly reduce the water that is conventionally wasted in the washing off process, through a combination of process and chemistry know-how and advanced technologies.

More information:
Monforts VDMA Textilmaschinen
Source:

Monforts Textilmaschinen GmbH & Co. KG by AWOL Media

VDMA: Top young talent with cutting-edge topics  (c) VDMA
The 2021 winners (from top left to right): Dr Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo.
10.11.2021

VDMA: Top young talent with cutting-edge topics

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.

The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.

New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.

In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."   

Techtextil and Texprocess 2022: registration now open (c) Messe Frankfurt
08.06.2021

Techtextil and Texprocess 2022: registration now open

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022.

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Source:

Messe Frankfurt

VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

Oerlikon: Booth at ITMA Asia 2021 (c) Oerlikon
01.06.2021

Oerlikon with a hybrid trade show concept at ITMA Asia

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

Monforts takes part in Webtalk by VDMA’s textile machinery division (c) Monforts/Pleva
13.05.2021

Monforts takes part in Webtalk by VDMA’s textile machinery division

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

To ensure a constant high quality in coating operations it is necessary to accurately measure and control the amount of chemical being applied, and Pleva’s series 700 devices achieve this via contact-free microwave moisture measurement technology which can be supplied either as single- or three-point units, or as a traversing measurement unit.

The free-to-attend webtalk will take place on May 20th from 2-3pm (CEST) and registration can be made here, along with further information.

Source:

AWOL Media

Klaus Heinrichs (c) A. Monforts Textilmaschinen GmbH & Co. KG
22.04.2021

Monforts: Vice-President Klaus Heinrichs is to retire at the end of May

Klaus Heinrichs began working in marketing for the company in 1992. “From the very beginning until today Klaus used his great flair and networking skills to secure and improve the company’s international presence and public relations, especially at seven successive ITMA textile machinery exhibitions, beginning with the show in Milan in 1995,” said Monforts Marketing Manager Nicole Croonenbroek.  “Later, he also took care of customer service, sales administration and exports in his uniquely calm and quietly-spoken style.”

“He has always been a guarantor of successful product launches for Monforts technical and technological highlights such as the TwinAir principle of independent airflow regulation, the Hercules LTM stenter chain, the Econtrol® dyeing technology or the Montex®Coat device - to mention only a few.”

Klaus Heinrichs began working in marketing for the company in 1992. “From the very beginning until today Klaus used his great flair and networking skills to secure and improve the company’s international presence and public relations, especially at seven successive ITMA textile machinery exhibitions, beginning with the show in Milan in 1995,” said Monforts Marketing Manager Nicole Croonenbroek.  “Later, he also took care of customer service, sales administration and exports in his uniquely calm and quietly-spoken style.”

“He has always been a guarantor of successful product launches for Monforts technical and technological highlights such as the TwinAir principle of independent airflow regulation, the Hercules LTM stenter chain, the Econtrol® dyeing technology or the Montex®Coat device - to mention only a few.”

Klaus has also been active on the VDMA’s Exhibition and Marketing Committee since 1993, which he chaired from 2005 to 2008.  
“Klaus always enriched the industry discussions with practical and future-oriented proposals and thus also advanced ITMA,” said Thomas Waldmann, Managing Director of the VDMA Textile Machinery Association. “We sincerely thank him and wish him all the best for this new chapter of his life.”

“We will miss Klaus as a colleague and as a manager because of his skills, character and his engagement,” added Monforts Managing Director Stefan Flöth. “He truly represents the Monforts commitment to our customers to be helpful, accurate, fast and reliable, and we keep him as a friend. I’m sure the many friends he made throughout the world during his career with the company will join us in wishing him all the best for his next phase of life together with his family.”


* Econtrol is a registered trademark of Dystar Colours Distribution GmbH.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

02.02.2021

VDMA continues technology webtalks

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Manfred Dobersberger, PureLoop and Wolfgang Hermann, EREMA Engineering Recycling Maschinen und Anlagen will present an integrated shredder extrusion technology for fibrous, textiles scraps, multilayers, films, trays, straps, foam, trays but also polymer mix materials from textiles and even classical thermoplastic composite materials.
  • Axel Hannemann, company Gneuss, offers recycling solutions which enable the fibre manufacturer to use their otherwise worthless fibre waste to substitute virgin material in the manufacture of high-quality fibres.
  • Markus Reichwein, Oerlikon Manmade Fibers: “We at Oerlikon Manmade Fibers describe a cascaded approach into new technologies as well as different material sources outlining your need for versatile solutions.”

After the presentations, the experts will be available to answer the participants' questions. Registration is possible.

Source:

VDMA e.V. Textilmaschinen

04.12.2020

VDMA continues technology webtalks

  • Webtalk on Technologies for Technical Textiles

The next VDMA technology webtalk is scheduled for 9th December 2020, 2.00 pm – 4.00 pm (CET). The topic will be “Technologies for Technical Textiles”.

The presenters and their topics at a glance:

Bena Manasieva Cavus from company Georg Sahm, will show how to add value and performance to your technical yarns with a single end extrusion coating line. Title of the presentation: “Winding and Yarn coating of Technical Textiles”

Janpeter Horn and Dennis Behnken, HERZOG Flechtmaschinen will present new developments in technical braids such as rope braiding/tension members to replace steel wire, medical braids for stents, ligaments, sutures and composites for lightweight construction and near net-shape preforms. Title of the presentation: “New Developments in Technical Braids”

  • Webtalk on Technologies for Technical Textiles

The next VDMA technology webtalk is scheduled for 9th December 2020, 2.00 pm – 4.00 pm (CET). The topic will be “Technologies for Technical Textiles”.

The presenters and their topics at a glance:

Bena Manasieva Cavus from company Georg Sahm, will show how to add value and performance to your technical yarns with a single end extrusion coating line. Title of the presentation: “Winding and Yarn coating of Technical Textiles”

Janpeter Horn and Dennis Behnken, HERZOG Flechtmaschinen will present new developments in technical braids such as rope braiding/tension members to replace steel wire, medical braids for stents, ligaments, sutures and composites for lightweight construction and near net-shape preforms. Title of the presentation: “New Developments in Technical Braids”

Hagen Lotzmann: "At KARL MAYER we work closely with our customers to offer the best cost–benefit ratio. We do this by using our advanced standard platforms as the basis for developing customised solutions." Title of the presentation: “Engineered solutions for technical textiles and composites – from standard application machines to customized systems”

After the presentations, the three experts will be available to answer the participants' questions. Registration is possible.

Source:

VDMA e.V. Textilmaschinen

VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen © ITM/TU Dresden
Frau Dipl.-Ing. Philippa Ruth Christine Böhnke im Technikum Bio- und Medizintextilien des ITM
02.12.2020

VDMA-Kreativitätspreis für ITM Nachwuchswissenschaftlerin

  • VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen

Frau Dipl.-Ing. Philippa Ruth Christine Böhnke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 für ihre exzellente Studienarbeit „Entwicklung von additiv gefertigten Verbund-Implantaten aus Kieselgelfasern und medizinischen Klebstoffen für die Knochenregeneration“ ausgezeichnet.

Am 02. Dezember 2020 fand die Verleihung der Förder- und Kreativitätspreise 2020 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erstmals online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

  • VDMA-Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 an Nachwuchswissenschaftlerin des ITM der TU Dresden verliehen

Frau Dipl.-Ing. Philippa Ruth Christine Böhnke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaus 2020 für ihre exzellente Studienarbeit „Entwicklung von additiv gefertigten Verbund-Implantaten aus Kieselgelfasern und medizinischen Klebstoffen für die Knochenregeneration“ ausgezeichnet.

Am 02. Dezember 2020 fand die Verleihung der Förder- und Kreativitätspreise 2020 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erstmals online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

In ihrer Arbeit entwickelte Frau Böhnke ein neuartiges Verbundmaterial mit einer bioaktiven Materialkomposition zur Reparatur und Regeneration von Knochendefekten, bestehend aus einer Faserverstärkung aus biokompatiblen Kieselgelfasern und einem Matrixmaterial auf Basis medizinischer Klebstoffe mit Calcium-, Natrium- und Phosphoranteilen. Die morphologische und mechanische Charakterisierung der gefertigten Strukturen zeigt im Vergleich zu handelsüblichen Knochenersatzmaterialen eine offenporige Struktur und um ein Vielfaches erhöhte Biegesteifigkeiten und Bruchdehnungen. Diese erzielten Materialeigenschaften entsprechen weitestgehend den realen Knochenstrukturen. Frau Böhnke hat mit ihrer herausragenden kreativen wissenschaftlichen Arbeit einen wichtigen maschinenbaulichen Beitrag in den Disziplinen Faserforschung, Additive Fertigung, Faserverbundtechnologien und Medizintechnik geleistet.

Source:

ITM/TU Dresden

VDMA: Mask production: Nothing runs without textile machinery (c) VDMA Textilmaschinen
21.07.2020

VDMA: Mask production: Nothing runs without textile machinery

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

  • Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of corona.
  • In their manufacture, textile machines are at the beginning of the production chain.

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the VDMA Textile Machinery Association are at the beginning of this technological chain.

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production.

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology.

In the wake of the corona crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk". Here, experts from up to four VDMA member companies present their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English. Participation in the web events is free of charge.
Topics of the first two webtalks were:
"Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)."
"Technologies for the production of respiratory protection masks (FFP masks and surgical masks)."

The format is well received. Around 180 people from more than 30 countries took part in the first two webtalks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas.

The next webtalk will take place on 23 July 2020 from 14.00 to 16.00 (CEST) on the current topic "Technology solutions to produce fully-fashioned community face masks." Experts from KARL MAYER, STOLL by KARL MAYER and Jakob Müller will be presenting their technologies for producing everyday textile masks to an international expert audience. Interested parties can register here.

Source:

VDMA Textilmaschinen

(c) Monforts Textilmaschinen GmbH & Co. KG
30.09.2019

Monforts in two-centre VDMA delegation to Pakistan

Monforts will be part of the VDMA Textile Machinery Association’s forthcoming delegation to Pakistan which will take place from November 11th to 14th.

In total, 14 companies covering the entire textile chain are participating in the visit, which will showcase the benefits and technological innovations of German textile machinery at seminars held in both Karachi and Lahore.

A technical seminar in Karachi will be held at the Hotel Karachi Avari Towers on November 12th and a second in Lahore will be held on November 14th at the Hotel Avari Lahore Towers.

Monforts will be part of the VDMA Textile Machinery Association’s forthcoming delegation to Pakistan which will take place from November 11th to 14th.

In total, 14 companies covering the entire textile chain are participating in the visit, which will showcase the benefits and technological innovations of German textile machinery at seminars held in both Karachi and Lahore.

A technical seminar in Karachi will be held at the Hotel Karachi Avari Towers on November 12th and a second in Lahore will be held on November 14th at the Hotel Avari Lahore Towers.

“The regions surrounding both of these cities have become major hubs for textile manufacturing, especially in areas such as home textiles and denim, where Monforts enjoys market-leading positions with its finishing systems,” says area sales manager Manfred Havenlith, who in addition to presenting at the seminars, will be holding meetings and networking with existing Monforts customers and potential new ones during the trip. “The Punjab region around Karachi, as Pakistan’s largest city, for example, is now dense with denim manufacturers, many of whom have already expressed keen interest in the new Monforts CYD continuous yarn dyeing system we introduced at ITMA 2019 in Barcelona in June.”

(c) VDMA Textilmaschinen
15.10.2018

VDMA: Original technology makes the difference

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

“Choose the original - Choose success" is the message of the VDMA Textile Machinery at this trade fair. On the occasion of the VDMA press conference on the opening day of ITMA ASIA, Ms Karin Christine Schmidt, Technical Director VDMA Textile Machinery, emphasised: “Copycat machines may look similar to the systems they are designed to emulate. But only originals do not simply follow but are pacesetters of technological progress.” Original technology is a keystone of innovation. It has the potential to successfully turn visions of entirely new possibilities in the textile production into reality.

This approach is visualised at the VDMA booth. The stand achieves attention and emotion through the picture motif: Neuschwanstein Castle. This world-famous tourist magnet is more than that: it is also a successful original. A vision, which could be successfully implemented in the long term through innovation and technology!

During the press conference, 18 spokespersons of renowned VDMA member companies showed how original technology can indeed play a major role in China’s and other Asian nation’s efforts to increase the resource efficiency of the textile industry and to interconnect information technology and manufacturing processes.  

Topics of the companies included automation, performance improvement, quality, sustainable solutions (raw material, energy, water saving), Industry 4.0 (in China called intelligent manufacturing), digital AR/VR services, platforms and software.

You are welcome to explore the speakers' statements in the atached PDF.

More information:
VDMA ITMA Asia + CITME
Source:

VDMA Textilmaschinen

Very well-received VDMA conference and B2B in Mumbai
29.05.2018

VDMA members successfully met Indian Textiles and Nonwovens: German textile machinery ranks first

India is a very important market for the German textile machinery industry, with an export of more than €255 million (+ 8 %) in 2017. Many German machinery builders have longstanding relations with Indian customers and quite a number of them also provide production plants and training centres in India. Not surprisingly, about 370 decision-makers and experts from the textile and nonwoven related industry attended the VDMA conference and B2B event called “German Technology meets Indian Textiles and Nonwovens” in Mumbai on 15-16 May 2018 (www.germantech-indiantextile.de).

India is a very important market for the German textile machinery industry, with an export of more than €255 million (+ 8 %) in 2017. Many German machinery builders have longstanding relations with Indian customers and quite a number of them also provide production plants and training centres in India. Not surprisingly, about 370 decision-makers and experts from the textile and nonwoven related industry attended the VDMA conference and B2B event called “German Technology meets Indian Textiles and Nonwovens” in Mumbai on 15-16 May 2018 (www.germantech-indiantextile.de).

According to a survey, both the event and German textile machinery engineering received the highest marks among the visitors. About 57 % of the visitors stated very good and 38 % good experience with machines and components from German suppliers. The performance and service promise as well as the high-quality standards have made German machine suppliers as most reliable partners in India and other countries. This positive result has by far not been reached by any other manufacturing nation from Europe or Asia. Asked for future processes, investments in technical textiles and/or nonwoven production seem to be the most favorite sectors in India. Around 74 % of the visitors plan to expand their production capacities with new machines and components whereas 26 % intend to replace old machinery by new machines and components. High productivity, after-sales service, end-product quality, low operating and acquisition costs are the decisive machine procurement criteria in this order. The investments plans are based on a positive business and investment outlook in India. 45 % of the visitors surveyed plan to invest more than 10 % within the next 12 months and 30 % up to 10 %. 25 % of the visitors expect a sales increase by more than 10 % for the next 12 months and 60 % anticipate a sales growth of up to 10%.

Considering this positive business climate and the high interest from the Indian industry, the 32 well-known VDMA members participated in the conference have good chances to offer the right technologies and to place new orders. The presented technology topics along the entire textile value chain will help the Indian industry to fulfill their expansion plans and to meet the challenges such as rising salary costs and shortage of labor in industrial regions. The major cutting-edge topics of the conference program were as follows:

•    Higher profits throughout the entire textile value chain
•    Energy, material, water and dyestuff savings for an environmentally friendly production
•    New applications such as technical textiles, nonwovens (e. g. hygiene products) or home textiles (e. g. terry towels)
•    Automation, industry 4.0, digital communication and smart factory solutions
•    Quality improvements e. g. with measurement and control systems
•    Lower investment costs in spinning preparation with integrated draw frames
•    New technologies to combine spinning and knitting
•    Smart textiles and added value products e. g. with embroidery machines

Whereas the event on 15-16 May 2018 focused on customers, a training session at the prestigious Veermata Jijabai Technological Institute VJTI in Mumbai on 17 May 2018 was addressed to future engineers. More than 220 textile manufacturing and mechanical engineering students followed the technical presentations. The VDMA's contribution to improve the education of future customers and partners was very much appreciated.