From the Sector

Reset
74 results
© Freudenberg Performance Materials
19.09.2022

Freudenberg hosts German National Hydrogen Council meeting

Freudenberg Performance Materials – the Freudenberg Group’s nonwovens specialist – was hosting a meeting of the German National Hydrogen Council at the Freudenberg headquarters in Weinheim, Germany, on September 16. As a leading global supplier of technical textiles, Freudenberg Performance Materials provides fuel cell components for mobility applications and for electrolyzers used to produce CO2-free hydrogen.

Freudenberg Performance Materials – the Freudenberg Group’s nonwovens specialist – was hosting a meeting of the German National Hydrogen Council at the Freudenberg headquarters in Weinheim, Germany, on September 16. As a leading global supplier of technical textiles, Freudenberg Performance Materials provides fuel cell components for mobility applications and for electrolyzers used to produce CO2-free hydrogen.

The German National Hydrogen Council was appointed by the German government and acts as an independent, non-partisan advisory board. The council board currently consists of 25 high-ranking experts in the fields of economy, science and civil society. The objective is to assist and advise the State Secretaries’ Committee on Hydrogen in the further development and implementation of Germany’s National Hydrogen Strategy. Council meetings are hosted by one of the board members to enable the council to deepen its knowledge of the relevant technologies, value chain roles and challenges. Dr. Silke Wagener is a member of the council board, and represents the Freudenberg technology group, giving input on suppliers’ know-how as well as contributing her decades-long expertise in technological solutions for the hydrogen industry.

During a tour of the factory organized for the council board members, Freudenberg Performance Materials explained the development and production of performance-critical gas diffusion layers manufactured from carbon fiber-based nonwovens for fuel cells and porous transport layers for electrolyzers. The tour highlighted the potential for improvements from a supplier’s perspective, such as the need for very timely exchange and collaboration along the value chain. Functioning, unbroken and scalable value chains, in parallel with the development and scaling of hydrogen infrastructure, are key prerequisites for the hydrogen industry to fulfill its vital role in the transformation to climate neutrality.

Gas diffusion layers are one of the main components at the heart of the fuel cell. Their function is to transport gases and liquids in the cells. They have a significant impact on system performance and costs, and are indispensable for the functioning of fuel cells. The same applies for porous transport layers that are the key component of electrolyzers for the CO2-free production of what is called green hydrogen.

Fuel cells in combination with green hydrogen are an important technology for CO2-free mobility, in particular with reference to buses, heavy-duty trucks and trains. Other uses include stationary applications such as stationary power generation or heat generation in buildings or industry.
Apart from mobility, green hydrogen also plays a key role in climate-neutral energy supplies in the industrial sector, particularly in the chemical and steel industries.

Source:

Freudenberg Performance Materials

Beaulieu International Group
23.08.2022

BIG at EuroGeo7 with geotextile fibres & woven fabrics

Beaulieu International Group invites EuroGeo7 attendees to discover geotextile solutions promoting greater sustainability for future civil engineering projects. Specialists from Beaulieu Fibres International (BFI) and Beaulieu Technical Textiles (BTT) will present high-performance geosynthetics through high tenacity fibres for lightweight, nonwoven geotextiles, and a range of high durability woven geotextile solutions with an environmentally beneficial impact.

Beaulieu International Group invites EuroGeo7 attendees to discover geotextile solutions promoting greater sustainability for future civil engineering projects. Specialists from Beaulieu Fibres International (BFI) and Beaulieu Technical Textiles (BTT) will present high-performance geosynthetics through high tenacity fibres for lightweight, nonwoven geotextiles, and a range of high durability woven geotextile solutions with an environmentally beneficial impact.

“We are delighted to sponsor EuroGeo7 and to be finally on-site, following a two-year postponement of the event. EuroGeo7 is bringing the geotextile community together to further promote and develop geosynthetics in a fast changing global economy striving for growth while reducing its carbon footprint along the supply chain, " comment from Jefrem Jennard, Sales Director Fibres, and Roy Kerckhove, Sales Director Technical Textiles. “Geotextiles provide highly versatile, durable and natural resource-saving alternatives in large infrastructure works, and offer durable protection in erosion control and waste/water management projects. We are continuously developing our fibres and finished engineering textiles with proven sustainability-enhancing benefits to progress product development and customer sustainability goals on fossil carbon reduction, while taking concrete steps to reduce our own environmental footprint.”
 
Sustainability improvement is key to the long-term strategy of Beaulieu International Group, and it is committed to supporting the geotextile industry by targeting and accelerating change and communicating the sustainable performance of its products. The UN Sustainable Development Goals are integrated into its business and are the foundations of the new Route 2030 Sustainability Roadmap.


For manufacturers of nonwoven geotextiles, BFI’s high-tenacity HT8 staple fibres enable customers to achieve nonwovens with high mechanical performance at reduced fibre weight. The HT8 high tenacity fibres are designed in a way that customers can meet the industry durability standards for a longer service lifetime, supporting more sustainable design and resource reduction over time. BTT’s woven geotextiles are amongst the most sustainable in the industry and provide a wide range of functions, including separation, filtration, reinforcement and erosion control.

BFI and BTT have conducted lifecycle assessments to calculate their activities' carbon footprint and solutions and have received external recognition for their ongoing sustainability efforts. For example, in 2022, BFI was awarded a Silver EcoVadis sustainability rating, and BFI and BTT are proud recipients of the Voka Charter for Sustainable Entrepreneurship 2022.

Source:

Beaulieu International Group

(c) Shima Seiki
16.08.2022

SHIMA SEIKI exhibiting at FEBRATEX 2022

Japanese flat knitting machine manufacturer SHIMA SEIKI MFG., LTD. will exhibit at the Brazilian Textile Industry Fair (FEBRATEX 2022) this month. On display will be the cutting edge in computerized flat knitting technology, represented by the latest WHOLEGARMENT® machines and design system.

The flagship MACH2XS series features the company’s original SlideNeedle™ on four needle beds and spring-type sinker system supporting a wide range of high-quality WHOLEGARMENT® knitting in all needles. The versatile MACH2S is capable of both WHOLEGARMENT® knitting and shaping on a conventional V-bed. SVR123SP features a special loop presser bed and is capable of producing unique woven-like hybrid fabrics as well as technical textiles. At FEBRATEX it will demonstrate its capability by knitting shoe uppers. The SVR and N.SSR workhorse machines set the industry benchmark for shaping machines, with SVR202 featuring tandem knitting capability for flexible operation. The SFG and SFG-I glove knitting machines rounds out the comprehensive lineup.

Japanese flat knitting machine manufacturer SHIMA SEIKI MFG., LTD. will exhibit at the Brazilian Textile Industry Fair (FEBRATEX 2022) this month. On display will be the cutting edge in computerized flat knitting technology, represented by the latest WHOLEGARMENT® machines and design system.

The flagship MACH2XS series features the company’s original SlideNeedle™ on four needle beds and spring-type sinker system supporting a wide range of high-quality WHOLEGARMENT® knitting in all needles. The versatile MACH2S is capable of both WHOLEGARMENT® knitting and shaping on a conventional V-bed. SVR123SP features a special loop presser bed and is capable of producing unique woven-like hybrid fabrics as well as technical textiles. At FEBRATEX it will demonstrate its capability by knitting shoe uppers. The SVR and N.SSR workhorse machines set the industry benchmark for shaping machines, with SVR202 featuring tandem knitting capability for flexible operation. The SFG and SFG-I glove knitting machines rounds out the comprehensive lineup.

Demonstrations will also be performed on SHIMA SEIKI’s SDS-ONE APEX4 3D design system that is at the core of the company’s “Total Knitting System” concept. With comprehensive support of all aspects throughout the knit supply chain, SDS-ONE APEX4 integrates knit production into one efficient workflow from yarn development, product planning and design to machine programming, production and even sales promotion. Especially effective is SDS-ONE APEX4’s capability to improve on the planning process with virtual sampling. Photo-realistic simulation capability minimizes the need for sample-making, effectively reducing time, material and cost from the prototyping process.

13.07.2022

VUB: Hybrid threads based on ultrafine metallic micro-wires

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

Attention was paid to the advanced solutions for smart textiles and e-textiles products esp. electrically conductive hybrid threads based on ultrafine metallic micro-wires. A significant advantage of these threads lies in their full compatibility with standard textile manufacturing processes, and possibility of customization in terms of fineness, electrical conductivity and temperature resistance of individual thread. As an example of one of the applications of conductive threads, different types of woven elastic conductive ribbons were demonstrated, which could be used as bus bars or as textile conductors wherever a variable length of conductive element is required without the negative influence on their electrical resistance during the change the length.

More information:
VUB micro-wires
Source:

VÚB a.s.
 

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.07.2022

Monforts: New orders for machines at Techtextil 2022

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

Trials
“We are now looking forward to interesting new trials and pilot production runs, as well as the commissioning of new orders for machines resulting from the extremely busy exhibition,” he says. “Obviously, everyone at the moment is looking to make energy savings, and we have developed a range of options for helping companies increase their resource efficiency, both on new lines and as retrofitted systems, but this is not stifling innovation at the new material level.

“There was a lot of interest in what is possible with the Montex®Coat coating system and the range of different techniques it enables, and at our ATC in Mönchengladbach, a Montex®Coat unit is integrated into the full technical textiles pilot line, on which it is possible to run new fabrics in widths of up to 1.8 metres.”

Explosion proof
The technical textiles line at the ATC incorporates a Montex four-chamber stenter and is fitted with an explosion-proof coating application chamber in order to allow treatment to be carried out with organic solvents and other volatile materials.

Every single component within the chamber has to meet the standards of the European Union’s ATEX directives for working in a potentially explosive atmosphere. A range of sensors linked to alarms operate at various levels within the chamber to ensure the specified lower explosion limit (LOL) is never exceeded and the ventilation adapts accordingly.

Advanced functions
Special features on the finishing line relate to further advanced functions such as the ability to treat materials not only at temperatures of up to 320°C, but also to be able to treat the top and bottom faces of certain materials at different temperatures within a single pass through the machine.

To achieve this, the first two chambers of the stenter are fitted with special, heavy duty TwinAir ventilation motors and separate burners for individual top/bottom temperature. A temperature differential of up to 60°C can be achieved between the upper and lower nozzles within the chamber, depending on the treatment paramenters.

Another key feature of the technical textiles line at the ATC is the special stretching device which is capable of pulling ten tons in length and ten tons in width – a huge amount per square metre of fabric and necessary in the production of materials such as woven or 3D knits for high temperature filter media.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

Graphic: RadiciGroup
20.06.2022

RadiciGroup at Techtextil with innovative textile solutions

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

Moreover, RadiciGroup is participating in a forum organized by the Technical Textiles Section of Sistema Moda Italia in collaboration with the Italian Space Agency (ICE) (Hall 12.1 – Stand C58), with the goal of introducing product innovations not only coming from a single manufacturer, but also from an innovative synergistic approach all along the supply chain, from raw materials to finished products. An example of this synergistic collaboration is the “Mars Spacesuit”, recently tested in the USA by analogue astronauts as part of a space medicine project designed to measure the vital signs of future astronauts and develop technologies to support the simulation of life in space and planetary environments. RadiciGroup teamed up with major Italian textile companies and supplied the materials to make the suits for the six analogue astronauts participating in the mission and coordinated the development of the technologies needed to create the technicalwear for use in extreme environmental conditions.

 

Source:

RadiciGroup

17.06.2022

Beaulieu Technical Textiles: going green with sustainable geotextiles

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

Construction products, like geotextiles, follow the very comprehensive European standard, EN 15804+A2. The third-party verification and approval by the international EPD® System officially demonstrates the low environmental impact of BTT’s geotextile products.

 

More information:
geotextiles Beaulieu
Source:

Beaulieu

14.06.2022

Members of TMAS at Texprocess, Techtextil and Heimtextil in Frankfurt

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

Members of TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing at the forthcoming Texprocess, Techtextil and Heimtextil shows which are all taking place in Frankfurt from June 21-24.

Source:

TMAS / AWOL Media

(c) SHIMA SEIKI MFG., LTD.
14.06.2022

SHIMA SEIKI to exhibit at Techtextil 2022 in Frankfurt

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

On display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible by taking advantage of the fact that flat knitting as a textile production method is capable of producing end products that are shaped-to-form and with added thickness. Compared to current methods of preform production, savings in post-processing time, material, labor and associated costs are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

SHIMA SEIKI's SDS®-ONE APEX4 3D design system will be available for demonstrations as well. Of particular interest should be its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time, cost and material normally associated with producing actual samples for each variation. When approved, the same data can be converted to machine data for immediate knitting, significantly reducing lead times.

ECO-COAT minimum application unit (c) Brückner
Minimalauftragsaggregat ECO-COAT
02.06.2022

BRÜCKNER: Answering current challenges of the textile industry

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

Source:

Brückner Trockentechnik GmbH & Co. KG

Advances in automation from Svegea at Texprocess 2022 (c) Svegea
With Svegea bias cutters, circular woven technical fabrics are fed via a revolving winder and slit at angles.
18.05.2022

Advances in automation from Svegea at Texprocess 2022

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy show in Frankfurt and a busy year,” says Svegea Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations wherever they are, and at the moment we’re seeing a lot of interest in the reshoring of operations by our customers, to bring final-stage manufacturing closer to the key European and US markets.”

E-Drive 2
The EC 300 collarette cutter on show in Frankfurt is equipped with the latest E-Drive 2 system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process.

The integrated, fully automatic FA500 roll slitter accommodates diameters up to 400mm and is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Niche applications
Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

The ability to produce tubular fabric which is cut on the bias allows customers to provide textiles which not only have improved drape and elasticity properties for complex and intricate shapes, but also offer ways to reduce production costs by eliminating unnecessary wastage from the manufacturing process. Pre-cutting the fabric to a specific bias reduces extra handling of the fabric in further processes, saving customers both valuable production time and costs.

Source:

AWOL Media on behalf of TMAS

Process control with Qualiscan QMS (c) Mahlo. Process control with Qualiscan QMS.
17.05.2022

Mahlo at Techtextil 2022

At Techtextil from 21-24 June in Frankfurt, Mahlo will be demonstrating how manufacturers of technical textiles can optimise their production even further using measuring and control technology.

Special straightening technology for technical textiles
Mahlo's range also includes solutions for straightening distorted goods. Best suited for technical textiles are, for example, the symbol of the straightening machine, the Orthopac RVMC-15 and the reinforced version Orthopac GRVMC-15. Frame, bearings, and rollers are designed for high loads and allow large working widths of up to 5,400 mm. As the latest development from Mahlo, the experts present the Orthopac CRVMC-15 automatic straightener, which is particularly interesting for the glass & carbon fabric industry and some special applications.

At Techtextil from 21-24 June in Frankfurt, Mahlo will be demonstrating how manufacturers of technical textiles can optimise their production even further using measuring and control technology.

Special straightening technology for technical textiles
Mahlo's range also includes solutions for straightening distorted goods. Best suited for technical textiles are, for example, the symbol of the straightening machine, the Orthopac RVMC-15 and the reinforced version Orthopac GRVMC-15. Frame, bearings, and rollers are designed for high loads and allow large working widths of up to 5,400 mm. As the latest development from Mahlo, the experts present the Orthopac CRVMC-15 automatic straightener, which is particularly interesting for the glass & carbon fabric industry and some special applications.

The Mahlo team will present the wide portfolio of intelligent scanners and sensors that record product and process parameters, such as distortion, fabric temperature, dwell time, basis weight, coating weight, thickness, moisture content, residual moisture, exhaust moisture, air permeability, etc. online. Among other things, visitors can expect to see the Famacont PMC-15 weft density measurement system in live operation. The system measures the weft or course density on the running web and compares it with the target value stored in the recipe data management system. The detected deviation from the target value is used to fully automatically control the overfeed during the needling process at the stenter frame and to ensure a constant weft/course density over the full width of the product.

Source:

Mahlo GmbH + Co. KG

Photo: Ralph Koch für Gebr. Otto
13.05.2022

Gebr. Otto with a specialised portfolio at Techtextil 2022

Gebr. Otto is exhibiting at this year’s Techtextil from 21 to 24 June in Frankfurt. The Dietenheim-based textile company manufactures a selected range of functional high-tech yarns made, for example, of conductive, high-strength and flame-retardant fibres. Gebr. Otto’s aim at the trade fair is to make personal contacts and to expand regional technology chains. The textile solution provider is to be found, as in past years, at the BW-I joint stand in Hall 12.1 at Booth No. C80.

Gebr. Otto is exhibiting at this year’s Techtextil from 21 to 24 June in Frankfurt. The Dietenheim-based textile company manufactures a selected range of functional high-tech yarns made, for example, of conductive, high-strength and flame-retardant fibres. Gebr. Otto’s aim at the trade fair is to make personal contacts and to expand regional technology chains. The textile solution provider is to be found, as in past years, at the BW-I joint stand in Hall 12.1 at Booth No. C80.

Growing demand for technical yarns
“In the industry Gebr. Otto is mostly known for its cotton yarns and twines,” says Robin Hefter, who is in charge of technical textiles at Gebr. Otto. Cotton is the fibre that is mainly spun in the company’s spinning mill. It has been Gebr. Otto’s main line of business for over 100 years. The technical yarns that have been in the company’s product range for a good five years are, by contrast, still relative newcomers. They account for around 10 per cent of the company’s output, their share of which is on the increase. “Technical textiles have proved to be a growth sector in recent years,” Hefter explains, “and due to current political events demand for them has increased even further.”

Portfolio with a protective character
That is a reference to personal protective equipment – clothing and gloves. Gebr. Otto’s highperformance functional yarns, many of which are based on high-tech fibres, are specially designed for use in this area. In addition to flame-retardant yarns made of meta-aramid Gebr. Otto processes antistatic or conductive fibres.

As a rule many chemical fibres are easily electrically chargeable without being able to discharge by themselves due to their low moisture absorption. That is why undesired discharges occur,
maybe even the next time you shake hands. In some situations, they can be life-threatening. “Imagine the team at a pit stop in a Formula 1 race,” Robin Hefter says. “refuelling a racing car
under pressure of time. There must not be a single spark, no matter how small.” That is why Gebr. Otto adds antistatic fibres to its technical yarns. They prevent electrostatic charging and
offer safety not only to pit stop teams but also to filling station attendants. If electric conductivity is required, conductive fibres are added. And high-strength fibres are used if high or ultra-high tensile strength is required.

Colour fastness rather than safety is required when it comes to spun-dyed yarns. The fibres take up the pigments more homogeneously than if they are dyed as yarn. They are much more colourfast and fade markedly less in sunlight because the pigment particles are better enclosed in the fibre.

Source:

Gebr. Otto Baumwollfeinzwirnerei GmbH + Co. KG

Freudenberg Experts meet Sustainability (c) Freudenberg Performance Materials
Sustainable seat covers padding material by FILC
11.05.2022

Freudenberg Experts meet Sustainability

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Evolon® textiles made from recycled PET
With Evolon® RE, Freudenberg Performance Materials is presenting an even more sustainable version of its high-performance microfilament textiles. Evolon® RE is manufactured from an average of 70% recycled polyester, which the company makes by cycling post-consumer PET bottles in-house. Evolon® RE products are available for various applications such as technical packaging, in weights currently ranging from 80g/sqm to 300g/sqm. For high-tech wiping, lightweight Evolon® RE is now available starting from 30g/sqm. The material meets the needs of cleaning specialists for more sustainable wiping solutions. Evolon® RE offers the same high quality and material performance as all other Evolon® textiles.

Tarpaulins made from recycled raw materials presented by Mehler Texnologies®
When it comes to tarpaulins on trucks, both protection of the transport cargo and advertising for the transport company place high demands on the material. Mehler Texnologies® tarpaulin material ranks among the premium products for truck tarpaulins. The company is a pioneer in sustainable development and is showcasing POLYMAR® 8556 ECO CF. This unique material has a 25% share of recycled raw materials in the coating mass. In addition, the material is made with 100% R-PES yarns. The input materials undergo a complex separation and filtering process.

Sustainable padding material for automotive and furniture seat covers presented by FILC
FILFLEX is a soft and flexible padding layer made from nonwovens for automotive and furniture seat covers. It prevents leather from creasing and improves the dimensional stability of the seat covers. In terms of sustainability, its benefit is its 100% PET composition, making FILFLEX easy to recycle. FILFLEX offers customers easier handling during sewing and the seat covering process. End users benefit from the high seating comfort.

JEC World: METYX and ITA officially join forces (c) METYX
METYX and ITA officially join forces
11.05.2022

JEC World: METYX and ITA officially join forces

The ITA Group, consisting of the Institute for Textile Technology of RWTH Aachen University (ITA) and their research and development service provider ITA Technologietransfer GmbH (ITA GmbH) are proud to announce their new partnership with METYX Composites, Turkey today at JEC World in Paris. METYX is a globally leading manufacturer of high-performance technical textiles for applications in the transportation, wind energy, construction, sports and leisure industries.

Ugur Ustunel, CEO METYX Composites: “The access to ITA´s competences along the entire textile composite value chain and to the impressive machine parks with over 250 machines from lab scale to industrial scale and the exchange with other partners will be very welcome for our future pre-competitive developments.” Dr. Christoph Greb, Scientific Director of ITA: “We are very happy to welcome METYX to our
network and to collaborate in many joint projects and studies on topics like recycling and sustainability, tapes and hybrid yarns or natural fibres just to name a few.”

The ITA Group, consisting of the Institute for Textile Technology of RWTH Aachen University (ITA) and their research and development service provider ITA Technologietransfer GmbH (ITA GmbH) are proud to announce their new partnership with METYX Composites, Turkey today at JEC World in Paris. METYX is a globally leading manufacturer of high-performance technical textiles for applications in the transportation, wind energy, construction, sports and leisure industries.

Ugur Ustunel, CEO METYX Composites: “The access to ITA´s competences along the entire textile composite value chain and to the impressive machine parks with over 250 machines from lab scale to industrial scale and the exchange with other partners will be very welcome for our future pre-competitive developments.” Dr. Christoph Greb, Scientific Director of ITA: “We are very happy to welcome METYX to our
network and to collaborate in many joint projects and studies on topics like recycling and sustainability, tapes and hybrid yarns or natural fibres just to name a few.”

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support ITA in developing and growing their network. ITA is located in the centre of the RWTH Aachen University Campus in close proximity to numerous other institutes for lightweight developments.”

SHIMA SEIKI to Exhibit at Techtextil North America 2022 (c) SHIMA SEIKI
SWG091N2
11.05.2022

SHIMA SEIKI to Exhibit at Techtextil North America 2022

Leading knit solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its U.S. subsidiary SHIMA SEIKI U.S.A. INC., will participate in the Techtextil North America exhibition in Atlanta, Georgia, U.S.A. this month. Under the theme “techKNITians—Technical Engineered Knit Applications,” the company will display its latest computerized flat knitting machines and computer graphic design system technology, aimed at promoting knitted applications in the field of technical textiles.

Leading knit solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its U.S. subsidiary SHIMA SEIKI U.S.A. INC., will participate in the Techtextil North America exhibition in Atlanta, Georgia, U.S.A. this month. Under the theme “techKNITians—Technical Engineered Knit Applications,” the company will display its latest computerized flat knitting machines and computer graphic design system technology, aimed at promoting knitted applications in the field of technical textiles.

Pioneered by SHIMA SEIKI, WHOLEGARMENT® knitting technology is capable of producing knitted items in their entirety without the need for sewing, and allows complex 3D forms to be knit such as car seat covers and interior furnishings. Selective compression allows control over placement and amount of pressure for various compression wear in sports and medical applications. The seam-free nature of WHOLEGARMENT® also ensures continuity of yarn, allowing functional yarns such as conductive yarns to wrap around the entire body without interruption, for applications in smart garments and wearable technology. Demonstrating the latest in WHOLEGARMENT® knitting technology at Techtextil will be the flagship MACH2XS machine that features the company’s original SlideNeedle™ on 4 needle beds and patented springloaded full-time sinker system. Capable of WHOLEGARMENT® knitting in all-needles, MACH2XS offers great flexibility for knitting high-quality WHOLEGARMENT® products with a seemingly endless variety of knit patterns at very high speed and efficiency, all while minimizing dependence upon labor-intensive sewing and linking. At Techtextil North America MACH2XS will be shown knitting a seam-free balaclava in one entire piece using fire-resistant yarn.

Also shown will be the SWG091N2 compact WHOLEGARMENT® knitting machine, also featuring SlideNeedle™ technology. Capable of producing small knitted items from safety gloves and compression socks to more sophisticated industrial applications such as tubular shields and harnesses, SWG091N2 offers unique solutions for the automotive, aerospace, sports, medical, safety, outdoor and other markets by knitting items in 3D without seams. SWG091N2 will be knitting fire-resistant gloves at Techtextil North America. SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design and simulation of various technical textiles. Of particular interest is its ultra-realistic simulation capability that realizes virtual sampling. When numerous variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time and cost normally associated with producing actual physical samples for each variation. The sustainability factor is also undeniable considering the amount of material normally gone to waste in the sampling stage.

At STOLL, innovations and optimizations go hand in hand (c) STOLL
The new STOLL customer centre in Reutlingen
11.05.2022

At STOLL, innovations and optimizations go hand in hand

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

Detail optimisations for more overall performance
The innovation packages have the benefits for customers in focus and were tailored to the respective target groups. Every optimization contained therein leads to a decisive improvement in production. All of the solutions developed can be easily integrated into existing STOLL machines.  

Innovation package Number One
Innovation package Number One will be launched on the market in a few weeks' time and is aimed explicitly at knitters who focus on technical textiles. The focus is on convenience and process acceleration. Simple network configuration, expansion of the number of NP values, extended functionality when loading and saving the pattern and also improvement of handling in connection with Production Management from PPS are just some of the features of the package. "The corresponding updates for the machine control system are available to our customers for download free of charge on Customer_Net. In the future, there will also be a cloud-based offering," explains Erhard Vöhringer.

Innovation package Number Two
Still in the pipeline, included in the Number Two innovation package, are improvements for the maintenance area – regarding the use of lubricants and the maintenance intervals (predictive maintenance) – as well as optimizations in terms of sustainability, for example when it comes to reducing consumption of oil and increasing reliability. These solutions will be suitable for all machine types and applications.
The focus here is on improvements in belt take-down, the import and export of data and support for additional storage feeders.
A physical improvement in handling is promised by the new lighting including mirror directly on the machine.
In addition, the development teams are currently working on optimizing various knitting qualities and increasing user-friendliness. So you can already be curious!

Concentrated innovative power
The STOLL development team, with several hundred engineers and technicians in the fields of electronics, software, patterning, and design, never runs out of topics. Questions like "What is the market looking for? What do customers want?  Which changes do the machines have to meet and which ones do the software control and design program have to meet?" are first discussed, evaluated and debated together as a team and then go into the development phase. "Our customers can be absolutely sure that all our innovations are meticulously tested before we go to market with them" emphasizes Erhard Vöhringer. This also applies to the solutions in the innovation packages.

Small solutions, big impact
STOLL flat knitting machines impress with their great application and production potential. Almost 150 years of extensive practical experience in flat knitting technology - the STOLL company was founded in 1873 - is unique in the industry. As a Business Unit of the KARL MAYER Group, STOLL continues to do everything in its power to inspire its customers with innovative strength. Productive, flexible and reliable - simply STOLL! This slogan has not lost any of its meaning today. Quite the contrary: With the new innovation packages, customers benefit not only from the latest high-tech flat knitting machines, but also from an always up-to-date performance upgrade of their existing machine park.
With its innovation packages, STOLL has found a flexible and very fast way directly to the customer. Anyone who wants to know more about this is cordially invited to this year's trade fairs. STOLL looks forward to seeing you at the KARL MAYER Group stand at ITM (Istanbul), Techtextil (Frankfurt), Techtextil India (Mumbai) and ITMA ASIA. (Shanghai).

More information:
Stoll Karl Mayer Gruppe
Source:

KARL MAYER Verwaltungsgesellschaft mbH

(c) SHIMA SEIKI MFG., LTD.
25.04.2022

SHIMA SEIKI to Exhibit at JEC World 2022

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Also available for video display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible because flat knitting as a textile production method is capable of producing end products that are shaped-toform and with added thickness. Therefore, savings in post-processing time, cost, material and labor as compared to current methods of preform production are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

Source:

SHIMA SEIKI MFG., LTD.

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

(c) FET
FET-100 Series Melt Spinning System
13.03.2022

FET gearing up for Techtextil 2022

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

A major theme to be highlighted on the FET stand is Sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials.

FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET