From the Sector

Reset
756 results
LENZING™ fibers are fully biodegradable in water, soil and compost (c) Lenzing
30.08.2019

LENZING™ fibers are fully biodegradable in water, soil and compost

  • Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
  • All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
  • Global legislators aim at limiting plastic waste persisting in the environment for centuries
  • EU Single-Use Plastics Directive partly regulates usage of plastic products
  • Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

  • Organic Waste Systems and TÜV confirm fiber biodegradability also in fresh water
  • All white LENZING™ Viscose, Modal and Lyocell fibers are now certified for all environments
  • Global legislators aim at limiting plastic waste persisting in the environment for centuries
  • EU Single-Use Plastics Directive partly regulates usage of plastic products
  • Biodegradable materials such as wood-based fibers are the best alternative to single-use plastics

The Lenzing Group received confirmation of the full biodegradability of its fibers in fresh water by the independent research laboratory Organic Waste Systems (OWS). The new and existing international certifications conducted by OWS and issued by TÜV Austria verify that LENZING™ Viscose fibers, LENZING™ Modal fibers and LENZING™ Lyocell fibers are biodegradable in all natural and industrial environments: in the soil, compost as well as in fresh and in marine water.

The biodegradability of cellulosic products and the synthetic fiber polyester was tested in fresh water at OWS according to valid international standards, e.g. ISO 14851. At the end of the trial period, LENZING™ wood-based cellulosic fibers, cotton and paper pulp were shown to be fully biodegradable in fresh water in contrast to synthetic polyester fibers. The fact that synthetic materials are not biodegradable leads to major problems in wastewater treatment plants and potentially marine litter. In turn, this not only harms fish and birds living in and close to the oceans but also all marine organisms and us humans.

“The Lenzing Group operates a truly circular business model based on the renewable raw material wood to produce biodegradable fibers returning to nature after use. This complete cycle comprises the starting point of the core value of sustainability embedded in our company strategy sCore TEN and is the ‘raison d’etre’ of our company”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group. “In living up to this positioning, we not only enhance the business of our suppliers, customers and partners along the value chain but also improve the state of the entire textile and nonwovens industries.”

Both the textile and nonwovens industries face huge challenges with respect to littering. If current trends continue, the oceans could contain more plastic than fish by 2050. Therefore, legislative bodies worldwide can no longer ignore the issue and have moved towards plastics legislation aimed at limiting the vast amount of waste. In response, European lawmakers issued the Single-Use Plastics Directive currently being transposed into national legislation in the EU member states.

Conventional wet wipes and hygiene products mostly contain plastic and were thus identified as one of the product categories to be singled out. Less polluting alternatives are generally encouraged by NGOs and legislators, e.g. products made of biodegradable wood-based cellulosic fibers. Plastic waste including microplastic can persist in the environment for centuries. In contrast, biodegradable materials are the best alternative to single-use plastics because they fully convert back to nature by definition and thus do not require recycling.

Source:

Corporate Communications & Investor Relations
Lenzing Aktiengesellschaft

HeiQ Photo: Shutterstock
18.07.2019

HeiQ: PFC-free DWR with dry cleaning durability

Swiss textile innovator HeiQ launches new fluorocarbon-free (PFC-free) products in their HeiQ Eco Dry product family for a full range of durable water repellence (DWR) technologies, for outdoor apparel to footwear and fashion. The newly introduced products are durable to dry cleaning.

Consumers of water repellent jackets, pants and footwear think it is important that products are made of environmentally-friendly materials and are PFC-free1. HeiQ Eco Dry is a family of innovative, eco-friendly and PFC-free water repellent textile technologies that provide protection against water and water-based stains. As of August 2018, HeiQ Eco Dry has a brand awareness of 8% in the US among water repellent gear consumers1. By adding new products to the range, HeiQ now has a broad range of DWR solutions for outdoor apparel, footwear and fashion markets.

Swiss textile innovator HeiQ launches new fluorocarbon-free (PFC-free) products in their HeiQ Eco Dry product family for a full range of durable water repellence (DWR) technologies, for outdoor apparel to footwear and fashion. The newly introduced products are durable to dry cleaning.

Consumers of water repellent jackets, pants and footwear think it is important that products are made of environmentally-friendly materials and are PFC-free1. HeiQ Eco Dry is a family of innovative, eco-friendly and PFC-free water repellent textile technologies that provide protection against water and water-based stains. As of August 2018, HeiQ Eco Dry has a brand awareness of 8% in the US among water repellent gear consumers1. By adding new products to the range, HeiQ now has a broad range of DWR solutions for outdoor apparel, footwear and fashion markets.

More information:
HeiQ DWR
Source:

HeiQ

19.06.2019

ZDHC Foundation Welcomes Broad Chemical Industry Engagement

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

After an intense dialogue and a series of meetings during the past year between the ZDHC Board of Directors and the GCIRT, an alignment was gained on ZDHC organisational commitments and a mutual understanding of the role of chemical suppliers within the ZDHC Programme. This opens the doors for broader, more active distribution of chemistry expertise and implementation support of textile dye and leather chemical manufacturing industry in the ZDHC Programme.

The Global Chemical Industry Round Table (GCIRT), sent an open letter to ZDHC in May 2018 and is a group of the leading chemical solution providers in the textile and leather industry with the collective aim of driving the industry further to become more sustainable. GCIRT’s signatory’s engagement into the ZDHC Programme will support a faster transformation of the industry by taking complexity out of the supply chain and to find appropriate solutions for the industries’ requirements.

The GCIRT members are: ARCHROMA (Switzerland); CHT Germany GmbH (Germany); Colourtex Industries Private Limited (India); DyStar Singapore Pte Ltd (Singapore); Huntsman Textile Effects (Singapore); KISCO (Korea); Pulcra Chemicals Group (Germany); RUDOLF GmbH (Germany); TANATEX Chemicals B.V. (Netherlands).

Source:

ZDHC Foundation

04.06.2019

ATMYSPHERE as the keynote theme for DOMOTEX 2020

  • Inspired by the health megatrend, the keynote theme for DOMOTEX puts wellbeing, naturalness and sustainability at the top of the agenda  
  • Stronger focus on contract business
  • Manufacturers invited to creatively frame their products as expressions of the keynote theme

Preparations are already ramping up for the 2020 edition of the world’s leading trade show for carpets and floor coverings DOMOTEX. The upcoming show, to be held from 10 to 13 January 2020, has ATMYSPHERE as its keynote theme, symbolizing its central focus on all those qualities of floors and floor coverings that contribute to wellbeing, naturalness and sustainability.
 

  • Inspired by the health megatrend, the keynote theme for DOMOTEX puts wellbeing, naturalness and sustainability at the top of the agenda  
  • Stronger focus on contract business
  • Manufacturers invited to creatively frame their products as expressions of the keynote theme

Preparations are already ramping up for the 2020 edition of the world’s leading trade show for carpets and floor coverings DOMOTEX. The upcoming show, to be held from 10 to 13 January 2020, has ATMYSPHERE as its keynote theme, symbolizing its central focus on all those qualities of floors and floor coverings that contribute to wellbeing, naturalness and sustainability.
 
Examples of products from the floor coverings industry that possess these qualities include floors with acoustic properties or sound-insulation components; carpets that bind fine dust particles or have thermal insulation properties; resilient floor coverings that are hypo-allergenic; and natural-wood floorboards that improve the interior climate by capturing excess humidity and releasing it again when the air in the room is dry. Other qualities that enhance positive indoor atmospherics include softness and pleasantness to the touch, sustainability, and aesthetic details that help transform rooms into oases of personal wellbeing.
 
“This year, as indeed in previous years, the lead theme is inspired by a current megatrend,” explains Sonia Wedell-Castellano, Deutsche Messe’s Global Director DOMOTEX. “And that trend is society’s heightened focus on health. Health is synonymous with quality of life and living well – and therefore translates into high expectations of the spaces around us. Alongside this, considerations of sustainability and recycling – and hence natural materials – continue to play a major role in our society. In terms of floor coverings, these are considerations and themes that are currently very much to the fore with our exhibitors and their work, especially given the great importance of floors as elements of creative interior design. With the right materials and design, carpets and floor coverings can be important factors in personal wellbeing and in the design of homes and workplaces that promote it. That is why ATMYSPHERE is of such definitive importance for all our exhibitors and visitor target groups.”

The “Framing Trends” showcase at DOMOTEX 2020 is a unique opportunity for manufacturers, artists and students to stage interior designs inspired by the ATMYSPHERE keynote theme and hence position themselves as trend leaders in innovative products and solutions for today’s modern floors and their positive, lifeaffirming qualities. Applications for participation at the “Framing Trends” showcase  are now open. Interested exhibitors and flooring-industry companies are invited to submit their ideas for displays of indoor oases of wellbeing that are built from the floor up.

More information:
Domotex 2020
Source:

DOMOTEX

20.05.2019

The CHT Group is chemical partner at Lidl

For the cooperation with Lidl within the project “Biodegradable textiles with prints” the CHT Group developed innovative recyclable textile print products.

These Lidl textiles are produced with CHT print pastes and pigments and were certificated by the internationally active consulting institute EPEA GmbH - Part of Drees & Sommer according to the Cradle to Cradle Certified™ Gold Standard. With this pilot project the companies demonstrate their sense of responsibility for people and the environment as well as their commitment in the field of circular economy.

For the cooperation with Lidl within the project “Biodegradable textiles with prints” the CHT Group developed innovative recyclable textile print products.

These Lidl textiles are produced with CHT print pastes and pigments and were certificated by the internationally active consulting institute EPEA GmbH - Part of Drees & Sommer according to the Cradle to Cradle Certified™ Gold Standard. With this pilot project the companies demonstrate their sense of responsibility for people and the environment as well as their commitment in the field of circular economy.

According to the Cradle to Cradle approach, shortly C2C, products shall merge into a biological or technical cycle after the end of their life cycle. This re-use helps prevent waste and save raw materials. The impact on the environment and health of all of the ingredients of C2C textiles is already tested in the design stage and during manufacturing. C2C experts additionally ensure a gapless control of the manufacturing processes. They check the chemicals in use, make sure that the water is kept clean and that renewable energies are used. Since this control affects the complete textile supply chain, it guarantees absolute transparency.

The CHT Group can now offer high quality and sustainable substitutes for common textile print pastes with its first biodegradable print pastes and pigments.

More information:
LIDL CHT Gruppe C2C
Source:

CHT Group

(c) Schoeller Textil AG
17.05.2019

Industrial partnership wear2wear: recycled, recyclable and PFC-free functional fabrics

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

The sustainable wear2wear concept is synonymous with high-quality, responsible clothing. In European operations, textile fibres from used garments are used to produce new functional fabrics. Depending upon the area of intended use, they also meet strict waterproofing, breathability, protection and comfort requirements. To ensure that the raw material cycle comes full circle, these textiles can be recycled again when they reach the end of their service life. As a result, there is no waste, and they go on to produce new garments. As the wear-2-wear partner companies guarantee that – from the quality of the raw materials to the guaranteed recycling end process – these are 100 percent recyclable, functional fabrics made of recycled textile fibres. Water- and dirt-repelling technologies based on renewable raw materials, along with the most advanced membrane technology, will ensure that the textiles are manufactured and impregnated entirely without the use of PFC in the future too.

Five partner companies  
The five European partner companies in the wear2wear cooperation cover the entire recycling loop. Heinrich Glaeser Nachfolger GmbH is a German fibre and yarn producer and the “recycler” in the loop. Märkischen Faser GmbH (D) is the “upcycler” and fibre manufacturer. Carl Weiske GmbH & Co. KG (D) develops the polymers, fibres, yarns, chemical additives and textile systems, and TWD Fibres GmbH (D), a fully-integrated filament yarn producer, covers the entire range of polyester and polyamide 6.6 continuous filament yarns. Schoeller Textil AG, the innovative Swiss company, is responsible for textile production and manufactures sustainable high-tech fabrics with maximum clothing comfort. The matching climate-neutral and similarly 100 percent recyclable PTFE and PFC-free membrane, as well as recycled outer materials and linings, are supplied by Sympatex Technologies (D), the ecological alternative among the textile function specialists. DutchSpirit is a Dutch company which has been dedicated to environment-friendly clothing since 2010. Its mission is to significantly increase the awareness for sustainable clothing and offer recyclable clothing in the workwear segment. DutchSpirit is the initiator for the development of the Inspire products from Schoeller Textil and provided the inspiration for the wear2wear concept. Further garment-making partners who now also belong to the cooperative group include: Anchor Workwear BV (NL), Hüsler Berufskleider AG (CH), Groenendijk Bedrijfskleding BV (NL), Bedrijfskledingdiscounter BV (NL) and Rifka'S (NL).

14.05.2019

Devan launches two new sustainable technologies

Textile innovator Devan Chemicals will launch two new technologies at the upcoming Techtextil show in Frankfurt (May 14-17). Bio-flam, a bio-based flame retardant product and Odour Breakdown, a wash durable, non-biocidal odour control solution.
As tradition goes, every two years Devan participates in Techtextil, the leading international trade fair for technical textiles and nonwovens. In the quest for sustainability and transparency every company faces these days, the new Devan technologies offer answers to product developers and portfolio designers.

Textile innovator Devan Chemicals will launch two new technologies at the upcoming Techtextil show in Frankfurt (May 14-17). Bio-flam, a bio-based flame retardant product and Odour Breakdown, a wash durable, non-biocidal odour control solution.
As tradition goes, every two years Devan participates in Techtextil, the leading international trade fair for technical textiles and nonwovens. In the quest for sustainability and transparency every company faces these days, the new Devan technologies offer answers to product developers and portfolio designers.


Bio-flam
Some facts & figures: There are at least 5000 fire incidents each day in the EU. Yearly, about 70 000 people are hospitalised with fire-related injuries. Fires cause pollution. So sustainable fire performance of products is an economic, environmental and human necessity. Take the example of mattresses: tests indicate that when on fire, non-FR treated products give less than 5 minutes escape time. Unfortunately, that is not enough time for the fire brigade to arrive. Needless to say that to increase escape time, to reduce the risk and to save lives, products need to be flame retardant. The challenge is to obtain flame retardant properties in the most natural way, to find the right balance between safety for the people and for the planet.

Companies can do this by replacing raw materials from a non-renewable source, by bio-based FR treatments, which are made from renewable sources and do not contain halogens or heavy metals, as described in the norm EN 16785 1:2015. Bio-based FR treatments, like Bio-flam, are made from renewable, vegetable sources and enable the FR treated products to be biodegradable. The active components are 100% halogen- and heavy metal-free. A welcome innovation for the bedding industry, as the European Commission requires mattresses to be recyclable by 2030 in order to reduce landfill.

Bio-flam P307 is the first introduction in the new Devan BIO-FR family, and is biodegradable and is developed to be used on 100% cotton or cotton/viscose mixtures, in order to create an ecological concept, safe for people and planet, whatever might happen. Bio-flam P 307 is developed for mattress ticking to pass EN 597 1&2. The Devan researchers are developing other bio-based products for other market segments and for other fire standards.

More information:
Devan Chemicals NV Devan
Source:

Marketing Solutions NV

(c) GARMON CHEMICALS
10.04.2019

Garmon launches white&green line at the Amsterdam Kingpins Show.

Garmon Chemicals confirms itself as a pioneer in chemistry specifically applied to garment treatment, at the forefront in terms of product research and active promotion on the sustainable issue. The Dutch show is the ideal stage to present a preview of the latest innovation born out of Garmon’s volcanic R&D department. It is Avol Lime, the revolutionary and ecologicallyadvanced neutralizing agent. Used in combination with Avol Oxy White (the bleaching agent that represents the safe alternative to potassium permanganate), it allows to obtain a fully safe and sustainable bleaching process.

white&green: solutions for eco-bleaching
white&green is the ultimate solution to obtain a safe and sustainable jeans discoloration process. The new line provides two avant-garde solutions: two highly performant products, both representing a safe and conscious alternative.
Two souls presenting unique characteristics:

The “white” soul

Garmon Chemicals confirms itself as a pioneer in chemistry specifically applied to garment treatment, at the forefront in terms of product research and active promotion on the sustainable issue. The Dutch show is the ideal stage to present a preview of the latest innovation born out of Garmon’s volcanic R&D department. It is Avol Lime, the revolutionary and ecologicallyadvanced neutralizing agent. Used in combination with Avol Oxy White (the bleaching agent that represents the safe alternative to potassium permanganate), it allows to obtain a fully safe and sustainable bleaching process.

white&green: solutions for eco-bleaching
white&green is the ultimate solution to obtain a safe and sustainable jeans discoloration process. The new line provides two avant-garde solutions: two highly performant products, both representing a safe and conscious alternative.
Two souls presenting unique characteristics:

The “white” soul

  • the hightest level of whiteness
  • superior bright shades
  • stylish vintage looks
  • extraordinary contrasts

The “green” soul

  • safe alternative to dangerous products
  • significant energy savings
  • classified in ZDHC gateway (from level 1)
  • greenofchange® approved
More information:
Garmon Chemicals
Source:

GARMON CHEMICALS

(c) Schoeller Textil AG
10.04.2019

Sustainability – Hand in hand with innovation, quality and design

March 2019: For decades, Schoeller Textil has been meticulous in observing its responsibility to humans and the environment. Developed and produced in Switzerland under the most stringent conditions, the high-tech textiles and textile technologies encompass a spirit of innovative and outstanding quality. With a focus on sustainability, the groundbreaking, ecological portfolio includes, among other things, genuine upcycled products with ECONYL®-Garn, 100 % recycled, recyclable wear2wear woven and knitted fabrics or bio technologies based on sustainable raw materials.

March 2019: For decades, Schoeller Textil has been meticulous in observing its responsibility to humans and the environment. Developed and produced in Switzerland under the most stringent conditions, the high-tech textiles and textile technologies encompass a spirit of innovative and outstanding quality. With a focus on sustainability, the groundbreaking, ecological portfolio includes, among other things, genuine upcycled products with ECONYL®-Garn, 100 % recycled, recyclable wear2wear woven and knitted fabrics or bio technologies based on sustainable raw materials.

High-quality textiles have a long service life and can remain in use for longer. The fabric properties are further improved by smart textile technologies such as water- and dirt-repelling functions. This helps preserve the environment and cuts down on the use of resources. In its manufacturing, Schoeller Textil AG always considers the ecological compatibility of its products. Therefore, since 2001, production at the Swiss site has always complied with the stringent guidelines of the bluesign® system. By conviction, Schoeller devotes itself to sustainable climate protection and takes part in the Energy Agency of the Swiss Private Sector programme to actively reduce carbon emissions and optimise energy efficiency.

04.04.2019

TINTEX awarded ‘IAPMEI’ innovation accolade for 2019

TINTEX is this year recipient of the unique and prestigious annual recognition from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protagonists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry .
“We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

TINTEX is this year recipient of the unique and prestigious annual recognition from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protagonists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry .
“We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

In a fast moving globalized market, all companies must be able to adapt quickly and using innovation, creativity, and responsibility can help deliver successes. And here TINTEX can network between Technological Centers, Universities, and Knowledge Centers, as a strategic business and holistic imperative. And so sharing the Naturally Advanced strategy of TINTEX as a driver for change, IAPMEI recognizes this TINTEX OPEN DAY as a demonstration of practical market potential, and has partnered with CENTI  (Centre for Nanotechnology and Smart Materials the Institute for New Technologies) and CITEVE (an institution of national and international reference for the promotion of Innovation and Technological Development) as a way to guarantee this success.
 
Being able to drive material innovation, and to promote a new generation of sustainable values to contemporary fashion, active, sports and lingerie markets through responsible supply chains can be transformative for our future fashion systems, and TINTEX is proud to be selected as part of the Make Fashion Circular initiative by the Ellen MacArthur Foundation, helping  to better activate these changes across the fashion industry for all to enjoy.

More information:
Tintex, campaign, Fashion
Source:

GB Network Marketing & Communication

03.04.2019

Beaulieu Fibres International UltraBond finalist for essenscia Innovation Award 2019

  • essenscia Innovation Award is Belgium’s most prestigious prize for industrial innovation
  • UltraBond is a cost-effective solution for fully recyclable, latex-free, sustainable carpets
  • Significant reductions in ecological footprint and cost for carpet manufacturers

Beaulieu Fibres International, Europe’s largest producer of polyolefin fibres, was nominated for the 2019 essenscia Innovation Award for its recently introduced UltraBond fibre.

The biannual award is the most prestigious prize for industrial innovation in Belgium. Created by essenscia, the Belgian Federation for Chemistry and Life Sciences industries, it aims to promote innovations in the Belgian industry and encourages companies to invest even more in innovative and sustainable products and applications. During the evaluation of the nominated innovation projects, the jury assesses their link with chemistry, life sciences and materials, their contribution to sustainable development, their intellectual property management strategy as well as their added value for the economy.

  • essenscia Innovation Award is Belgium’s most prestigious prize for industrial innovation
  • UltraBond is a cost-effective solution for fully recyclable, latex-free, sustainable carpets
  • Significant reductions in ecological footprint and cost for carpet manufacturers

Beaulieu Fibres International, Europe’s largest producer of polyolefin fibres, was nominated for the 2019 essenscia Innovation Award for its recently introduced UltraBond fibre.

The biannual award is the most prestigious prize for industrial innovation in Belgium. Created by essenscia, the Belgian Federation for Chemistry and Life Sciences industries, it aims to promote innovations in the Belgian industry and encourages companies to invest even more in innovative and sustainable products and applications. During the evaluation of the nominated innovation projects, the jury assesses their link with chemistry, life sciences and materials, their contribution to sustainable development, their intellectual property management strategy as well as their added value for the economy.

Formally introduced in early 2019, UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bond nonwovens. It enables carpet manufacturers to create 100% PP needlepunch carpets that meet the same performance requirements as traditional constructions, while also reducing end-of-life environmental impact.

UltraBond helps manufacturers make a significant contribution to the circular economy through the production of 100% recyclable carpets. In addition to making recycled PP available for the plastics production chain and reduced waste generation, their total lack of water use and reduced energy use result in significant environmental advantages and financial savings. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint to the tune of a 35% reduction in CO2 emissions during the full production process.

Source:

Beaulieu International Group

12.03.2019

Hexcel and Lavoisier Composites: Alliance to Up-Cycle Composite By-Products from the Aerospace Manufacturing Cycle

Hexcel has joined forces with a Lyon-based startup, LAVOISIER COMPOSITES. This company has developed CARBONIUM®, a new generation of material sourced entirely from carbon composite by-products generated by the French aerospace sector.

Hexcel supplies high-performance composite materials for the latest generation of aircraft such as the Airbus A350 XWB (53% composite structure). This has greatly contributed to the reduction of the aircraft's weight, thereby reducing its fuel consumption and carbon footprint. Composites are a significant first step toward tackling environmental and economic challenges, and eco-sourcing of the industry by-products also plays a key role.

Hexcel has joined forces with a Lyon-based startup, LAVOISIER COMPOSITES. This company has developed CARBONIUM®, a new generation of material sourced entirely from carbon composite by-products generated by the French aerospace sector.

Hexcel supplies high-performance composite materials for the latest generation of aircraft such as the Airbus A350 XWB (53% composite structure). This has greatly contributed to the reduction of the aircraft's weight, thereby reducing its fuel consumption and carbon footprint. Composites are a significant first step toward tackling environmental and economic challenges, and eco-sourcing of the industry by-products also plays a key role.

CARBONIUM®, which was developed with a process based on three patents pending, reduces overall environmental impact by 40-50%, compared to equivalent products derived from virgin materials. Based on the "climate change" factor, the life cycle assessment carried out with Hexcel revealed that the up-cycling of by-products from the aerospace composites industry leads to a reduction in CO2 emissions of 13kg per kg of CARBONIUM® used.
In its first year of operation, LAVOISIER COMPOSITES has already enjoyed commercial success, including the launch of two top-of-the-range watch models by Swiss luxury watchmaker ULYSSE NARDIN using this new material.

From aircraft fuselages to watchmaking, the composites manufacturing cycle presents opportunities for reducing our impact on the environment.

More information:
Hexcel Hexcel, Airbus
Source:

AGENCE APOCOPE

12.03.2019

Recycling of Coated and Painted Textile and Plastic Materials

The EU-funded Project, in which Devan Chemicals is a key partner, held a kick off meeting end of February 2019 at the EU Commission in Brussels, Belgium. The project consortium, led by Belgian R&D centre CENTEXBEL, consists of 17 European partners from across the value chain including design, manufacturing, NGOs, and research and innovation.

The focus of the consortium is on coated and painted textiles and plastic materials which are currently not recyclable. Ambitious plastic recycling targets of 50% have been set by the European Plastics Industry, and to meet these targets, smart solutions to enable the circular use of textile and plastic parts with multi-layer coatings must be considered.

DECOAT has therefore been established to investigate triggerable smart polymer material systems and appropriate recycling processes. The solutions will be based on smart additives (like microcapsules or microwave triggered additives) that will enable the efficient of coatings and other finishes, activated by a specific trigger (heat, humidity, microwave, chemical) to permit recycling.        

The EU-funded Project, in which Devan Chemicals is a key partner, held a kick off meeting end of February 2019 at the EU Commission in Brussels, Belgium. The project consortium, led by Belgian R&D centre CENTEXBEL, consists of 17 European partners from across the value chain including design, manufacturing, NGOs, and research and innovation.

The focus of the consortium is on coated and painted textiles and plastic materials which are currently not recyclable. Ambitious plastic recycling targets of 50% have been set by the European Plastics Industry, and to meet these targets, smart solutions to enable the circular use of textile and plastic parts with multi-layer coatings must be considered.

DECOAT has therefore been established to investigate triggerable smart polymer material systems and appropriate recycling processes. The solutions will be based on smart additives (like microcapsules or microwave triggered additives) that will enable the efficient of coatings and other finishes, activated by a specific trigger (heat, humidity, microwave, chemical) to permit recycling.        

Devan’s specific role is in the development of microcapsules that will release its active core on application of a certain trigger (e.g. heat) at the end of life of the article. This active core material may be something that, for example, will promote the detachment of different coating layers (by separating them), opening the possibility for recyclability/re-use of the base materials. Different active core ingredients will be evaluated, and Devan will develop processes for each type of core ingredient and for each type of coating layer/matrix.

The bold aim of the four-year project is to decrease landfill by 75% of coated articles that are presently difficult to recycle, such as clothing, electronic goods and automotive components. A reduction in the carbon footprint by at least 30% for the considered products is aimed for. By enabling the recycling of such materials, DECOAT is expected to generate in the medium term a new market valued at over 150 million Euros in Europe.

More information:
Devan Chemicals NV Devan
Source:

Marketing Solutions NV

09.02.2019

DENIM EXPERT LTD.: First denim company from Bangladesh to join the UNFCCC

Denim Expert Ltd. joined the Fashion Industry Charter for ClimateAction alongside other brands and suppliers.
Denim Expert Ltd. is the first manufacturer in Bangladesh to join the UNFCCC (United Nations Framework Convention on Climate Change) and currently taking climate action in line with the goals established by the Paris Agreement of 2015. The company is limiting their Green House Gas (GHG) emissions supporting the world reaching climate neutrality by 2050.

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty, which entered in to force on 21st March 1994, having being ratified by a sufficient number of countries. The ultimate objective of the convention is to stabilize greenhouse gas concentrations in the atmosphere at a level that will prevent dangerous human interference with the climate system.

Denim Expert Ltd. joined the Fashion Industry Charter for ClimateAction alongside other brands and suppliers.
Denim Expert Ltd. is the first manufacturer in Bangladesh to join the UNFCCC (United Nations Framework Convention on Climate Change) and currently taking climate action in line with the goals established by the Paris Agreement of 2015. The company is limiting their Green House Gas (GHG) emissions supporting the world reaching climate neutrality by 2050.

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty, which entered in to force on 21st March 1994, having being ratified by a sufficient number of countries. The ultimate objective of the convention is to stabilize greenhouse gas concentrations in the atmosphere at a level that will prevent dangerous human interference with the climate system.

The parties to the convention have met annually from 1995 in Conferences of the Parties (COP) to assess progress in dealing with climate change. In 1997, the Kyoto Protocol was concluded and established legally binding obligations for developed countries to reduce their greenhouse gas emissions in the period 2008–2012. The 2010 United Nations Climate Change Conference produced an agreement stating that future global warming should be limited to below 2.0°C relative to the pre-industrial level. In 2015 the Paris Agreement was adopted, governing emission reductions from 2020 onwards, through commitments of countries in Nationally Determined Contributions, lowering the target to 1.5°C. The Paris Agreement entered into force on 4 November 2016.

Source:

Denim Expert Ltd.

(c) SANITIZED AG
05.02.2019

Sanitized® Odoractiv 10: Odor-free polyester functional clothing

  • Patented technology with bluesign®, ECO PASSPORT, and Skin Friendly certification

Polyester sport and functional textiles treated with Sanitized® Odoractiv 10 are protected against “permastink”. Already a holder of the Swiss Technology Award, the Sanitized® Odoractiv 10 odor-management technology can now carry the bluesign® sustainability label, the Skin Friendly certification from the Hohenstein Institute and the ECO PASSPORT by OEKO-TEX® label. SANITIZED AG has been a bluesign® system partner for over 10 years.

An unwelcome odor can quickly develop in polyester sport and functional clothing, even if freshly washed. This is “permastink”. It’s a challenge to the textile industry as it generally reduces the attractiveness and market opportunities of sport and functional clothing made from polyester.

  • Patented technology with bluesign®, ECO PASSPORT, and Skin Friendly certification

Polyester sport and functional textiles treated with Sanitized® Odoractiv 10 are protected against “permastink”. Already a holder of the Swiss Technology Award, the Sanitized® Odoractiv 10 odor-management technology can now carry the bluesign® sustainability label, the Skin Friendly certification from the Hohenstein Institute and the ECO PASSPORT by OEKO-TEX® label. SANITIZED AG has been a bluesign® system partner for over 10 years.

An unwelcome odor can quickly develop in polyester sport and functional clothing, even if freshly washed. This is “permastink”. It’s a challenge to the textile industry as it generally reduces the attractiveness and market opportunities of sport and functional clothing made from polyester.

The patented, non-biocidal Sanitized® Odoractiv 10 technology provides specific solutions and sales arguments for the end products. It works in two ways: The odor-causing bacteria can’t stick to the textile surface and are washed out completely in a normal wash cycle. This is due to the anti-adhesive “coating” applied in the padding process. This effect has been proven in a test procedure developed in cooperation with EMPA (Swiss Federal Laboratories for Material Science and Technology). Secondly, the treatment has an adsorbing effect. The odors are “trapped” and repeatedly expelled during a normal wash cycle.

No binder, no nano
Another characteristic: The treatment with Sanitized® Odoractiv 10 doesn’t apply an additional binder system. As with all of our products, SANITZED AG uses no nano technology. The safety and tolerability have been confirmed by the Skin Friendly certification from the Hohenstein Institute and ECO PASSPORT by OEKO-TEX® label. These have now been joined by the bluesign® accreditation.

More information:
Sanitized AG
Source:

PR-Büro Heinhöfer

UltraBond, the cost-effective solution for fully recyclable, latex-free, sustainable carpets (c) Beaulieu Fibres International
10.01.2019

Beaulieu Fibres International: Cost-effective solution for fully recyclable, latex-free, sustainable carpets

  • Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
  • Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
  • UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

  • Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
  • Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
  • UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

Using UltraBond manufacturers finally gain the potential to cost-efficiently produce 100% recyclable carpets. In addition to the general benefits of making recycled PP available for the plastics production chain and reduced waste generation, environmental advantages and financial savings arise from a total lack of water and less energy use. As a 100% dry process, thermal bonding uses no water and results in a total absence of waste water. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint.

The sustainability benefits are quantified through lifecycle analysis (LCA) of an exhibition carpet application – among the primary applications for needlepunch carpets. Evaluations show that the absence of water consumption directly translates into a large energy saving of 93% when using UltraBond compared to a latex bonding solution, and also a potential annual water saving of over 20 million litres for 100 million m2 of exhibition applications in the EU. Without the addition of any other bonding agent, CO2 emissions are reduced by 35% over the full production process.

Karena Cancilleri, Vice President Beaulieu Engineered Products, Beaulieu International Group, commented, “Recyclability and achieving a greener, more cost-effective production process without compromising on current performance levels are significant unsolved topics within today’s carpet industry. By eliminating the need for latex and chemical binders through UltraBond, we offer needlepunch manufacturers a breakthrough they have been looking for that boosts environmental and economic sustainability. We see textile flooring as just the beginning. Together with our customers, we look forward to exploring the potential of this unique thermal bonding fibre in other applications such as laminated nonwovens or as an alternative to dry powders.”

Discover more about UltraBond from the Beaulieu Fibres International team at Stand B56 Hall 11, Domotex 2019 in Hannover, Germany from January 11-14, 2019.

More information:
Beaulieu Fibres International
Source:

EMG

PREMIUM and ECOALF are taking steps towards sustainability. (c) Premium Group
Javier Goyeneche, President and Founder of ECOALF.
17.12.2018

PREMIUM and ECOALF are taking steps towards sustainability

  • STOP TALKING. START ACTING.
  • Climate change is real. And so is the responsibility of every human being to help in reducing waste.

We no longer want to talk about sustainability, we want to act. For January, PREMIUM is partnering with Spanish fashion label and sustainable clothing pioneer ECOALF. The brand will present its lifelong mission and latest collection in a dedicated space as well as an art installation together with conceptual artist Juan Garaizabal.

"2019 is all about digital first and an active debate about social and environmental issues. Transparency and sustainability are key words. By reducing plastic waste on all our shows, teaming up with ECOALF and giving this wonderful brand dedicated space and time for spreading their message, we are taking steps into right direction. Every little action counts. We should talk about the things we do more instead of talking about what we are not doing. We all need to wake up. Now.” – Anita Tillmann, CEO PREMIUM Group

  • STOP TALKING. START ACTING.
  • Climate change is real. And so is the responsibility of every human being to help in reducing waste.

We no longer want to talk about sustainability, we want to act. For January, PREMIUM is partnering with Spanish fashion label and sustainable clothing pioneer ECOALF. The brand will present its lifelong mission and latest collection in a dedicated space as well as an art installation together with conceptual artist Juan Garaizabal.

"2019 is all about digital first and an active debate about social and environmental issues. Transparency and sustainability are key words. By reducing plastic waste on all our shows, teaming up with ECOALF and giving this wonderful brand dedicated space and time for spreading their message, we are taking steps into right direction. Every little action counts. We should talk about the things we do more instead of talking about what we are not doing. We all need to wake up. Now.” – Anita Tillmann, CEO PREMIUM Group

ECOALF creates high-quality garments using recycled materials collected from the bottom of our oceans. Commitment, sustainability and innovation are at the core of everything the company does, resulting in both conscious and stylish urban, adventure, knitwear and activewear pieces.   
 
“I love collaborating with people that also believe we have the opportunity to change the world for the better. It’s no longer about what you do, but how you do it. It is important to stand up for what you believe in, because fashion cannot just be about looking good.” – Javier Goyeneche, President and Founder of ECOALF. 

On Wednesday, January 16th, at 10am and 2pm, Goyeneche will present his brand’s values, philosophy and way of working on the experience floor of SHOW&ORDER X PREMIUM at Kühlhaus, right next to the STATION area. Show visitors, media and other exhibitors are invited to listen, learn and discuss.   
 
The art piece in partnership with Garaizabal unveiled at PREMIUM on January 15th is filled with waste to portray our everyday reality, and purposefully interactive so that visitors can throw their own trash inside the installation. The aim is to educate about correct waste disposal and show that every individual’s decision matters: Stop, Think, Act.

(c) Archroma
06.12.2018

Absolute Denim to become first denim manufacturer to convert 100% of its production to ground-breaking Aniline-free* indigo solution by Archroma

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

During production, some of the aniline stays locked into the indigo pigment and is difficult to wash off the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. As a result of its toxicity (more hazardous than alkylphenols) it is now starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers.

The new Denisol® Pure Indigo 30 liq was therefore developed as an aniline-free* indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Archroma tested Denisol® Pure Indigo at Absolute Denim mill in Thailand. Archroma wanted to be sure that the new indigo dye would perform exactly the same as conventional indigo.

James Carnahan, Head of Sustainability at Archroma, comments: “At Archroma we continuously challenge the status quo in the deep belief that we can make our industry sustainable - but we cannot do it alone. Without forward-thinking manufacturers such as Absolute Denim to consciously adopt these eco-advanced innovations in their daily production, like our aniline-free* Denisol® Pure Indigo, we will not be able to move this industry forward on our resource-constrained world we live in. As consumers are increasingly aware of, and concerned about, climate change and ecological threats, this is not only the right thing to do - it is also good for business.”

“Deep down inside most of us want the world to be a better place for our loved ones and for future generations,” insists Vichai Phromvanich, Board Member, Absolute Denim, “starting with how we live, what we eat, what we wear, still trying to be cool, fashionable, still trying to be environmentally conscious. Archroma’s aniline free indigo project is therefore something we as a new generation manufacturer have supported from the beginning, by opening our doors for tests in the project phase, and now by sending out our articles to many of our customers. For us, after all, a nice pair of jeans looks even nicer without aniline!”

* Below limits of detection

Fast Concept - Paper leather jacket, by Prof Kay Politowicz and Dr Kate Goldsworthy UAL (c) RISE AB
Fast Concept - Paper leather jacket, by Prof Kay Politowicz and Dr Kate Goldsworthy UAL
23.11.2018

New research pushing the limits for ‘fast’ and ‘slow’ fashion towards a sustainable, circular future

  • conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

  • conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

Award-winning TINTEX Textiles shows water saving solutions at Performance Days (c) TINTEX Textiles
80% Lenzing Modal® + 20% European Hemp rib by TINTEX Textiles
20.11.2018

Award-winning TINTEX Textiles shows water saving solutions at Performance Days

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

All the recent awards bestowed, demonstrate TINTEX continue research and commitment. They have been awarded for the Best product of the Base Layer Category by ISPO jury, moreover they have just received the prestigious German Design Awards 2019 and last but not least, they are selected as finalists for the Future Textile Awards in the category Best Innovation for Sustainable Textiles.
TINTEX continues to lead the way, as they proudly take part in the Make Fashion Circular initiative, by the Ellen MacArthur Foundation and activate change industry wide. This initiative aims to collaborate and innovate towards a new textile economy based on the principles of a Circular Economy.

In addition, since this November, TINTEX is a bluesign® system partner, thus means that they are responsibly acting parties of the textile value chain committed to applying the bluesign® system, continuously improving their environmental performance and always been focused on a sustainable future.

A milestone for TINTEX and fashion, as they launch Naturally Clean - an exceptional smart finishing process that is uniquely responsible. Naturally Clean enhances the natural beauty of cotton, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean achieves this by using Novozymes technology, a company that is indeed the world leader in biological solutions. Second, using textile chemicals with the lowest possible environmental impact, without compromising performance, from Beyond Surface Technologies AG. Naturally Clean maintains the original characteristics for an extended period of time. All materials are Oeko-Tex and soon bluesign® certified, thus eliminating harmful substances.
TINTEX’ Autumn/Winter 2019/2020 collection includes vibrant tones, refreshing turquoise and electric green, light and warm copper with chocolate browns that connect the natural and spiritual in an extra-sensorial universe. Infused with a stunning palette of nostalgic and multicultural colors - warm yellow with darkened reds, dynamic purple with urban greys - that express globalization and human connection.
Key smart ingredients of the season are:

  • A New Generation of Cotton: GOTS certified organic cotton, Supima® cotton, and ECOTEC® by Marchi & Fildi the smart cotton that saves up to 77.9% water consumption and introduces the concept of a circular economy.
  • SeaCell™ and Smartcel™: produced using the Lyocell process in a closed loop with no chemicals released as waste. The patented process of SeaCell™ allows that the positive properties of the seaweed are permanently preserved within the fiber, even after multiple washing cycles. Smartcel™ includes the essential trace element zinc providing anti-inflammatory capabilities.
  • REFIBRA™ by Lenzing technology involves upcycling a substantial proportion of cotton scraps e.g. from garment production, in addition to wood pulp, where the raw material is transformed to produce new TENCEL™ Lyocell fiber to make fabrics and garments.
  • Bemberg™ by Asahi Kasei: A new generation GRS Certified material, made from cotton linters, with a biodegradability certification by Innovhub. A matchless, high tech natural material, with a special handfeel and aesthetics.
  • ROICA™ by Asahi Kasei
    - ROICA™ EF has a percentage of pre-consumer recycled content that is more than 50%, and thanks to this it has been GRS (Global Recycled Standard) certified.
    - ROICA™ V550 a premium stretch innovative yarn boasting the Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients as it was evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

Of special interest this season, the two TINTEX’s fabrics that made it into the PERFORMANCE FORUM Jury’s Pick Category for their contribution to this season Topic “WATER – OUR RESPONSIBILITY”.

A smart rib developed to reduce the water usage as most as possible, from cultivation of raw materials until fabric finishing. A blend of TENCEL™ Modal, cellulosic & biodegradable material treated with no hazardous chemicals, pesticides nor fertilizers, and European hemp, a fast-growing plant that requires very little water and no herbicides, pesticides, synthetic fertilizers or GMO seeds. Both fibres are biodegradable.

The second selected article is a 100% Merino Wool jersey made unique thanks to Colorau® by TINTEX, a patented natural dyeing process technique that uses vegetable herbs and extracts. A great amount of water was saved by avoiding subsequent washing steps. Also, lower water pollution is achieved by avoiding synthetic dyestuffs.

More information:
TINTEX ROICA™ Performance Days
Source:

GB Network