From the Sector

Reset
26.04.2024

Lenzing honours early stage researchers with the Young Scientist Award

For the third time, Lenzing is presenting the Young Scientist Award at the Dornbin Global Fiber Congress (GFC) from 11 to 13 September 2024 for bachelor and master students who are working on innovative solutions to ecological challenges in the fiber and textile industry. The application deadline is 30 June 2024 and the winning project will receive prize money of EUR 5,000.

Bachelor's and master's degree students can submit their scientific work in the categories “Fashion and Circular Economy”, “Alternative Raw Materials” and “Textile Recycling" as well as in the field of “New Fiber Technologies” and face a jury of renowned experts from the industry. The aim is to promote students who inspire the industry with their research results and to create a platform for networking with the textile and fiber industry.

For the third time, Lenzing is presenting the Young Scientist Award at the Dornbin Global Fiber Congress (GFC) from 11 to 13 September 2024 for bachelor and master students who are working on innovative solutions to ecological challenges in the fiber and textile industry. The application deadline is 30 June 2024 and the winning project will receive prize money of EUR 5,000.

Bachelor's and master's degree students can submit their scientific work in the categories “Fashion and Circular Economy”, “Alternative Raw Materials” and “Textile Recycling" as well as in the field of “New Fiber Technologies” and face a jury of renowned experts from the industry. The aim is to promote students who inspire the industry with their research results and to create a platform for networking with the textile and fiber industry.

More information:
Award Dornbirn GFC
Source:

Lenzing AG

ANDRITZ: Start-up of production line for sustainable wipes Photo: Teknomelt
ANDRITZ neXline wetlace CCP at Teknomelt, Türkiye
24.04.2024

ANDRITZ: Start-up of production line for sustainable wipes

International technology group ANDRITZ has successfully started up a new nonwovens production line supplied to Teknomelt Teknik Mensucat San. ve Tic. A.S. in Kahramanmaras, Türkiye. The new neXline wetlace CCP (carded-carded-pulp) line produces nonwoven roll goods for biodegradable, plastic-free wet wipes

By combining the benefits of two technologies, spunlace and wetlaid, the line enables the use of bio-based fibers, like viscose and wood pulp, to produce a high-performance and sustainable wipe with the same technical product characteristics and performances as a conventional wipe made of synthetic fibers while protecting the environment.

Teknomelt is one of the leading manufacturers of nonwoven meltblown, spunbond, SMS and SMMS fabrics in Türkiye. The company serves a wide range of markets, exporting 45% of its production. With the new ANDRITZ Wetlace CCP line, the company is expanding its range of sustainable nonwovens production for wipes. 

International technology group ANDRITZ has successfully started up a new nonwovens production line supplied to Teknomelt Teknik Mensucat San. ve Tic. A.S. in Kahramanmaras, Türkiye. The new neXline wetlace CCP (carded-carded-pulp) line produces nonwoven roll goods for biodegradable, plastic-free wet wipes

By combining the benefits of two technologies, spunlace and wetlaid, the line enables the use of bio-based fibers, like viscose and wood pulp, to produce a high-performance and sustainable wipe with the same technical product characteristics and performances as a conventional wipe made of synthetic fibers while protecting the environment.

Teknomelt is one of the leading manufacturers of nonwoven meltblown, spunbond, SMS and SMMS fabrics in Türkiye. The company serves a wide range of markets, exporting 45% of its production. With the new ANDRITZ Wetlace CCP line, the company is expanding its range of sustainable nonwovens production for wipes. 

Source:

ANDRITZ AG

Nyon traceability Grafik RadiciGroup
23.04.2024

RadiciGroup: a Physical and digital nylon traceability

RadiciGroup announced the launch of the first physical and digital nylon traceability project at Techtextil 2024. A gilet made from the yarn manufactured in one of the Group’s European industrial sites, which, thanks to a QR code on the garment, can reveal its origin and display information about its production process.

Product traceability is a key element in guaranteeing transparency along the entire supply chain, as it means each stage of production – from spinning to weaving and from packaging through to retail – can be monitored and recorded. The project, made possible by a partnership with FibreTrace, allows manufactured nylon yarns to be traced both physically and digitally. In fact, RadiciGroup inserts a tracer (an inorganic additive) that is uniquely associated with the yarn and remains identifiable throughout all stages of processing – on both the fabric and the finished garment. Naturally, the tracer does not alter the esthetical, functional and technical performance of the yarns in any way.

RadiciGroup announced the launch of the first physical and digital nylon traceability project at Techtextil 2024. A gilet made from the yarn manufactured in one of the Group’s European industrial sites, which, thanks to a QR code on the garment, can reveal its origin and display information about its production process.

Product traceability is a key element in guaranteeing transparency along the entire supply chain, as it means each stage of production – from spinning to weaving and from packaging through to retail – can be monitored and recorded. The project, made possible by a partnership with FibreTrace, allows manufactured nylon yarns to be traced both physically and digitally. In fact, RadiciGroup inserts a tracer (an inorganic additive) that is uniquely associated with the yarn and remains identifiable throughout all stages of processing – on both the fabric and the finished garment. Naturally, the tracer does not alter the esthetical, functional and technical performance of the yarns in any way.

In terms of digital traceability, during the production stages a scanner detects the presence of the tracer and can transmit the data relating to provenance onto a dedicated digital platform. Finally, the consumer, via a QR code, can access the digital platform that provides all information concerning the provenance of the product and its journey through the supply chain.
 
“This project is the result of almost two years’ work by our Research & Development team. We’re very proud to bring to the market the first physical and digital nylon traceability solution and we plan to extend this initiative to other fibres produced by the Group,” emphasised Filippo Bona, R&D Manager of RadiciGroup Advanced Textile Solutions.

More information:
Radici RadiciGroup nylon
Source:

RadiciGroup

19.04.2024

Call for Papers ADD-ITC 2024

The next AACHEN-DRESDEN-DENKENDORF INTERNATIONAL TEXTILE CONFERENCE will take place on November 21/22 2024 in Stuttgart on site.  

You are invited to submit abstracts for oral or poster presentations related to the following topics:

  • Textile Mechanical Engineering
  • Biobased Fibers
  • High Performance Fibers
  • Fiber Composites and Lightweight Construction
  • Circular Economy and Recycling
  • Medicine and Health
  • Functionalization and Finishing
  • Transfer Session “From Idea to Practice”

 
Deadline abstract submission for oral presentations: April 30, 2024
Deadline abstract submission for poster presentations: September 30, 2024

Partner countries for 2024 are Belgium, Netherlands and Luxembourg.

The next AACHEN-DRESDEN-DENKENDORF INTERNATIONAL TEXTILE CONFERENCE will take place on November 21/22 2024 in Stuttgart on site.  

You are invited to submit abstracts for oral or poster presentations related to the following topics:

  • Textile Mechanical Engineering
  • Biobased Fibers
  • High Performance Fibers
  • Fiber Composites and Lightweight Construction
  • Circular Economy and Recycling
  • Medicine and Health
  • Functionalization and Finishing
  • Transfer Session “From Idea to Practice”

 
Deadline abstract submission for oral presentations: April 30, 2024
Deadline abstract submission for poster presentations: September 30, 2024

Partner countries for 2024 are Belgium, Netherlands and Luxembourg.

Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf

INDA: Clean Advocacy Summit in Washington D.C. (c) INDA
19.04.2024

INDA: Clean Advocacy Summit in Washington D.C.

INDA held an Advocacy Summit in Washington, D.C. in partnership with ISSA’s, The Worldwide Cleaning Industry Association, 2024 Clean Advocacy Summit. Over the course of two days, INDA members took to the nation’s capital to convene, connect, and advocate for issues important to the nonwovens industry, meeting with the staff and elected officials in over a dozen congressional offices.  

A key focus of these congressional meetings was education and support for the passage of the WIPPES Act (H.R.2964 / S.1350), the federal effort to implement consistent national Do Not Flush Labeling standards for non-flushable wipes. They also advocated for the renewal of the Miscellaneous Tariff Bill to provide tariff relief on items without domestic production as well as discussed various trade policy issues.

INDA held an Advocacy Summit in Washington, D.C. in partnership with ISSA’s, The Worldwide Cleaning Industry Association, 2024 Clean Advocacy Summit. Over the course of two days, INDA members took to the nation’s capital to convene, connect, and advocate for issues important to the nonwovens industry, meeting with the staff and elected officials in over a dozen congressional offices.  

A key focus of these congressional meetings was education and support for the passage of the WIPPES Act (H.R.2964 / S.1350), the federal effort to implement consistent national Do Not Flush Labeling standards for non-flushable wipes. They also advocated for the renewal of the Miscellaneous Tariff Bill to provide tariff relief on items without domestic production as well as discussed various trade policy issues.

The advocacy summit portion of the event included panels on Wipes Policy, consumer education, international trade, plastics, and PFAS. Speakers included Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative for Textiles, James Willett, International Economist for the International Trade Administration, Sarah Sapirstein, federal lobbyist for the California Association of Sanitation Agencies, Lara Wyss, President of the Responsible Flushing Alliance, Jason Eberstein of the Plastics Industry Association, and Shawn Swearingen of the American Chemistry Council.

More information:
INDA ISSA wipes USA
Source:

INDA, the Association of the Nonwoven Fabrics Industry

18.04.2024

Lenzing AG: Elections to the Supervisory Board

On Thursday, April 18, 2024, the 80th Annual General Meeting of Lenzing AG discharged the members of the Managing Board and the Supervisory Board for the 2023 financial year and set the remuneration of the members of the Supervisory Board for the 2024 financial year in advance.

Dr. Markus Fürst retired from the Supervisory Board at his own request with effect from the end of the General Meeting. Dr. Markus Fürst has been a member of the Supervisory Board and various committees of Lenzing AG since 2021.

The General Meeting elected Dr. Cornelius Baur as a new member of the Supervisory Board of Lenzing AG until the end of the General Meeting that decides on the discharge for the 2028 financial year. In addition, Melody Harris-Jensbach’s mandate was extended until the Annual General Meeting that decides on the 2028 financial year.

On Thursday, April 18, 2024, the 80th Annual General Meeting of Lenzing AG discharged the members of the Managing Board and the Supervisory Board for the 2023 financial year and set the remuneration of the members of the Supervisory Board for the 2024 financial year in advance.

Dr. Markus Fürst retired from the Supervisory Board at his own request with effect from the end of the General Meeting. Dr. Markus Fürst has been a member of the Supervisory Board and various committees of Lenzing AG since 2021.

The General Meeting elected Dr. Cornelius Baur as a new member of the Supervisory Board of Lenzing AG until the end of the General Meeting that decides on the discharge for the 2028 financial year. In addition, Melody Harris-Jensbach’s mandate was extended until the Annual General Meeting that decides on the 2028 financial year.

The Supervisory Board of Lenzing AG continues to consist of ten members elected by the Annual General Meeting: Dr. Cornelius Baur, Mag. Helmut Bernkopf, Dr. Christian Bruch, Dr. Stefan Fida, Dr. Franz Gasselsberger, Melody Harris-Jensbach, Cord Prinzhorn, MBA, Mag. Gerhard Schwartz, Dr. Astrid Skala-Kuhmann and Nicole van der Elst Desai. DI Stefan Ertl, Stephan Gruber, Bonita Haag, Helmut Kirchmair and Johann Schernberger were delegated to the Supervisory Board by the works council.

In the constitutive meeting of the Supervisory Board following the Annual General Meeting, Cord Prinzhorn, MBA, was elected Chairman and Dr. Stefan Fida was re-elected as Deputy Chairman of the Supervisory Board.

KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed as the auditor for the annual financial statements and the consolidated financial statements for the 2024 financial year.

Beaulieu Fibres International
18.04.2024

Beaulieu Fibres International launches Sustainable Fibres Program

As the 2024 edition of Techtextil, the leading international trade fair for technical textiles and nonwovens, gets underway in Frankfurt, Beaulieu Fibres International is introducing its Sustainable Fibres Program to help reshape fibres for sustainable solutions.

Through the initiative the company is looking to gain deeper insights into the challenges encountered by customers across the value chain to identify opportunities to leverage its expertise to deliver impactful products and services.

Beaulieu has identified several conversation triggers for Techtextil 2024, including recyclable, high performance, renewable, bio-circular, co-developed and made in Europe fibres, to find out what matters most to customers in terms of targets, green initiatives and sustainability expectations.
The Sustainable Fibres Program serves as a charter to help Beaulieu Fibres International accelerate its ‘fibres that build futures’ campaign, by educating on existing solutions, reshaping products and creating partnerships to facilitate market cooperation on shared challenges.

As the 2024 edition of Techtextil, the leading international trade fair for technical textiles and nonwovens, gets underway in Frankfurt, Beaulieu Fibres International is introducing its Sustainable Fibres Program to help reshape fibres for sustainable solutions.

Through the initiative the company is looking to gain deeper insights into the challenges encountered by customers across the value chain to identify opportunities to leverage its expertise to deliver impactful products and services.

Beaulieu has identified several conversation triggers for Techtextil 2024, including recyclable, high performance, renewable, bio-circular, co-developed and made in Europe fibres, to find out what matters most to customers in terms of targets, green initiatives and sustainability expectations.
The Sustainable Fibres Program serves as a charter to help Beaulieu Fibres International accelerate its ‘fibres that build futures’ campaign, by educating on existing solutions, reshaping products and creating partnerships to facilitate market cooperation on shared challenges.

In addition to leading the market within the framework of the European Green Deal, and alignment with the objectives of the proposed Ecodesign for Sustainable Products Regulation, Beaulieu Fibres International is committed to achieving its own sustainability targets outlined in its roadmap known as ROUTE 2030.

More information:
Beaulieu Fibres International
Source:

Beaulieu Fibres International

11.04.2024

Carbitex: Global team with strategic new hires

Carbitex – a leader in flexible carbon fiber composites focused on footwear, travel, and accessories – announces the appointment of Filippo Sartor to Vice President of Global Sales and Sam Gardner to the role of Vice President of Engineering and Operations. After a restructuring of manufacturing operations and the return of Carbitex founder, Junus Khan, as company president in 2023, the brand welcomes two strategic hires to catalyze the next phase of the leading materials brand.

With over 20 years in the footwear industry, including nearly 11 years as the Global Senior Sales Manager at JV International, official worldwide licensee for Michelin Soles, Sartor brings high level sales expertise within performance footwear and material innovation. With extensive focus on building new business in the US and Far East, and based in Milan, Italy, Sartor is uniquely positioned to help propel Carbitex globally into the next chapter.

Carbitex – a leader in flexible carbon fiber composites focused on footwear, travel, and accessories – announces the appointment of Filippo Sartor to Vice President of Global Sales and Sam Gardner to the role of Vice President of Engineering and Operations. After a restructuring of manufacturing operations and the return of Carbitex founder, Junus Khan, as company president in 2023, the brand welcomes two strategic hires to catalyze the next phase of the leading materials brand.

With over 20 years in the footwear industry, including nearly 11 years as the Global Senior Sales Manager at JV International, official worldwide licensee for Michelin Soles, Sartor brings high level sales expertise within performance footwear and material innovation. With extensive focus on building new business in the US and Far East, and based in Milan, Italy, Sartor is uniquely positioned to help propel Carbitex globally into the next chapter.

Gardner, based in Renton, Washington, will manage product development and manufacturing at Carbitex. With time at Square One Distribution - a long-time Carbitex brand partner in the wake and waterski segment - and most recently as VP for Union Aquaparks, Gardner has considerable experience designing new products and managing sourcing, logistics, and supply chain. His background will help Carbitex strengthen both factory and brand partner relations and push product innovation.

These recent hires position Carbitex to better serve strategic brand partners, achieve forecasted growth in the short and long term, and expand global market presence.

More information:
Carbitex
Source:

Carbitex

11.04.2024

Lenzing AG is suspending its dividend policy

The Managing Board of Lenzing AG decided today to suspend the existing dividend policy of at least EUR 4.50 per share for an unlimited period of time.

Lenzing AG continues to expect higher EBITDA for the 2024 financial year compared to the previous year.

The Managing Board of Lenzing AG decided today to suspend the existing dividend policy of at least EUR 4.50 per share for an unlimited period of time.

Lenzing AG continues to expect higher EBITDA for the 2024 financial year compared to the previous year.

More information:
Lenzing AG Dividende
Source:

Lenzing AG