From the Sector

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

• For the first time @Interfilière New York edition, the award winning Interfeel’Award Sustainability ILUNA Group with ROICA™ by Asahi Kasei
• Interfilière New York, 17th–18th October 2018, booth 113

In line with the powerful global trend towards smarter fashion solutions, Iluna Group launches its Embroidery Division. Specialists in lace since 1985, the new Embroidery Division offers a complete and innovative product match in line with the modern expectations of brands and retailers. Staying true to Iluna’s DNA, the introduction of emb roidery and guipure are all produced with only recycled materials.

In addition to the launch of the Embroidery Division, this season novelties include:

1. Since  September  2018,  Iluna  Group’s  products with the right percentage of transformed content are GRS (Global Recycled Standard) certified.

2. Of  major  interest  today,  the  launch  of eco - velvet lace  entirely made  of  sustainable  materials  including ROICA Eco - Smart™  Family, Tencel™ Lyocell and  Q - Nova® .

3. Within  the Black  Label  collection,  the  Ultralight series  is  enriched  with  new  multicolor geometric  and floral galloons and allovers: here Iluna changes the color of  the  thread  not  only  in  the background,  but  also  in  the design,  the  same  article  reinvents  itself  in a  variety  of great visual impact.

4. Green   Label   collection, the   Iluna   dedicated range featuring a new responsible approach in respect of the  planet  and  people, able  to deliver  innovation,  beauty and quality, at 360°. In addition to the all over, jacquard, double jacquard and mesh offer, the line is also featuring new stretch Galloon laces fully made with GRS certified recycled materials,  including  the  stretch  thanks  to the introduction of the  unique ROICA™ sustainable yarn part of the ROICA Eco - Smart™ Family.

5. ILUNA has  strategically  included  in  all  their  stretch  laces  only ROICA Eco- Smart™  Family of sustainable yarns since some time.

6. ILUNA can also boast its new STeP (Sustainable Textile Production) certification by Oeko-Tex, a certification  that  clarifies  and  communicates  the  company’s  sustainable  production  commitment. In
addition to this, all products are Oeko - Tex 100 certified.

7. ILUNA has  created  the  new e- shop offering  its  exclusive  materials  to  smaller companies   looking   for   added   values   as: creativity,   innovation,   made   in   Italy   and responsibility.

8. The  whole  collection  is  also  visible online at  its  web  site,  previous  registration, and   orders   can   be   done   directly   online always aiming to customers care.

Nevertheless, for ILUNA smart innovation is not   just   a   project even,   its   space at Interfilière will  be  the stage  where visitors will have  the  opportunity  to  discover the new  collection and to also  to experience and  touch latest boundaries  of  lace smart innovations.

Today ILUNA represents the largest European lace producer, and thanks to its journey toward the most contemporary  way  to  innovate  that  includes  responsibility,  has  also  become  a  reference  point  in  the
international market for a lace offer that is beautiful, innovative and responsible at the same time.  An  alchemy  of  design  and  sustainable  innovation, the  only  eco-fashion  line  that  includes  lace  and stockings,  capable  of  combining  ethics  and  high  quality  standards  with  a  fashion  image  of  bright  and deep colors.

• Back to Seoul: JEC Asia gathers the composites industry in Korea for its 11th edition
• JEC Asia, November 14-16, 2018 – COEX Center, Seoul, South Korea

Paris - After the record-breaking figures of the 2017 edition, that marked the move of JEC Asia from Singapore to Seoul, the event is returning to the capital city of the Republic of Korea with a strong program, not only on the exhibition floor, but also in the conference sessions and all services at the disposal of every attendee.

“We are very grateful for the support of the industry, government bodies, and academics, regarding the evolution of JEC Asia, that has led to the success of the platform. Indeed, 90% of the show floor is already booked which bodes well for the preparation of the event.” Commented Christian STRASSBURGER, Events Director Asia for JEC Group.

“On top of that, the event is truly international, as 45% of the exhibitors are coming from outside Asia. JEC Asia will welcome pavilions from Germany, France, Italy, Japan, China and Singapore, as well as the major composite clusters in Korea.” He added.

FOCUS ON THE AUTOMOTIVE INDUSTRY

The future of mobility is a hot topic for composite materials and JEC Asia will represent, promote and provide information about the increasing integration of composites in automotive developments.
Numerous programs will be offered, such as a whole day conference on Composites in Automotive, a Leadership Composites Circle, an Auto Planet, showcasing parts, a B2B meetings program, a JEC Innovation´Award category and Composites tours (site visits of composite-related facilities).

Finally, for the second time, JEC Asia will host the International Carbon Festival, organized by KCTECH and the Jeonju region, with top-notch conferences and international speakers.

Key Figures 2017

• +230 companies
• 6,271 professional visits
• 43 speakers
• 42 countries represented
• 12 JEC Innovation Awards
• 400 B2B meetings
• 2 Composites Tour

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

Fresh innovation from the Taiwan Pavilion
The Taiwan Pavilion lives up to its reputation as one of the leading sources of industry innovation. Ten exhibitors in the Taiwan Pavilion will showcase a variety of innovations ideal for a number of industries. With advances in medical and hygiene product technologies, exhibitors Web-Pro Corporation will offer protective cover-all materials that resist pathogens and micro-organisms and multi-layered PE films for hygiene products, while Kae Hwa Industrial will introduce their developments in materials that protect against viruses. Four Elements Energy Biotechnology will showcase their multi-functional Masterbatch product, a unique FDA-qualified, anti-mildew and transparent plastic additive that repels bacteria.

Other exhibitors to watch out for in the Taiwan Pavilion include Ritex Machinery, who will display their Air Through machinery which can be applied to nonwoven fabrics for hygienic, medical and filtration uses. Everlight Chemical Industrial’s Evereco® adhesives introduce an eco-friendly solution with heat-resistance and other resilient properties. Also offering eco-friendly alternatives is TomLong Techstile and their TPU coated fabrics, ideal for waterproof and inflatable products.

Productivity and efficiency at the German Pavilion
Following high demand in the Chinese market, the German Pavilion returns with around 30 exhibitors, showcasing their expertise in efficiency in textile production. Highlights include Baumüller Nürnberg’s modular concepts and intelligent automations which allow flexible reactions to changeable market requirements. Edelmann Technology brings new high speed winder systems for increased production rates and new concepts for reducing contamination in products. ISRA Surface Vision will present 100% inline optical surface inspection methods for quality control and process optimisations. Another product to watch out for is Kufner’s xShield®, a lightweight, soft textile with 99% shielding efficiency against electromagnetic radiation.

Other big names in the German Pavilion include Autefa Solutions, Brückner Textile Technologies, Dornier Lindauer, IBENA, J.H. Ziegler, Kufner, Perlon and more.

Belgium Pavilion returns along with a Czech Republic debut
Organised by Fedustria (Belgian Textile, Woodworking and Furniture Industry Federation), the Belgium Pavilion will include textile recycling company Belrey Fibres, engineered fabrics by Pennel & Flipo for marine and rescue industries, as well as leading coating specialists Vetex who will feature a variety of functional tapes, and R&D institute Centexbel who carry out research projects across the entire textile and polymer production chain.

The new Czech Republic Pavilion organised by ATOK, the Association of Textile-Clothing–Leather Industry, will showcase three exhibitors who will provide solutions for technical yarn, fabric processing and nonwoven fabrics. These include: GF Machinery, showcasing R&D and production of special machines and lines for glass / basalt yarn and fabric processing; Retex’s nonwoven needle-punched and air laid textiles; and STAP, Europe’s biggest manufacturer of narrow fabrics.

The Cinte Techtextil China fair is recognised by European manufacturers as a gateway to the Asian market. With investment from China boosting the technical textile industry, and more Asian countries than ever developing their technical markets, Cinte Techtextil China 2018 is set to be a hub of business potential.

EUROBIKE, the world’s leading trade fair for the cycling industry, included ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers discovered ROICA™ premium stretch that provides comfort and movement as it energizes.

ROICA™ joined this year’s EUROBIKE Academy line-up and host an interactive panel focused on sustainability as an added value for the cycling market. Whether an expert or newcomer, the must attend panel titled; What is Smart Innovation in the Biking Market? was held on Monday, July 9th from 12:00-12:45 in Conference Center East, Room London. Moderated by Giusy Bettoni, CEO, C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy), a Milan based company generating global strategies and identifying new values essential for today’s knowledgeable conscious consumer. The panel led the way, as they shared their expertise and discuss what they are doing to push the boundaries of innovation. They will highlight responsible dimensions and processes currently available. The all-star lineup includes:

Uwe Schmidt, Asahi Kasei’s ROICA™, Managing Director introduces cycle enthusiasts, brands, retailers and manufacturers to the world’s first premium sustainable stretch yarn: ROICA™ Eco-Smart and the ROICA™ Feel Good family dedicated to well-being.
 
Laura Gambarini, marketing and communication manager at M.I.T.I. S.p.A.: M.I.T.I. Since 1931, M.I.T.I. develops and creates premium and innovative stretch warp knitted fabrics for all the high performance sports. Cycling brands recognize M.I.T.I. as the market leader for the outstanding features of their innovative fabrics. Green soul is their ultimate creation, the first fully sustainable stretch warp knitted range of fabrics in the world, created with ROICA™ Eco-Smart family for the new generation sustainable performance garments.
 
Sven Koehler, Head of production Maloja Clothing GmbH: Maloja, an outdoor specialty brand with its roots in nature and wellbeing have developed new amazing biking sets constructed of M.I.T.I. SpA fabrics using certified yarns belonging to ROICA™ Eco-Smart family.
 
Sergio Alibrandi, Executive Marketing Director Sitip S.p.A.: SITIP creates high-tech innovative sports fabrics that are made in Italy and optimize the latest technology. Committed to smart innovation, learn how they developed their ground-breaking multi-panel thermal bib tights able to generate heat for riders that want to conquer cold winter training. Made from BeHOT fabric constructed with ROICA™ StretchEnergy™, the next level of well-being providing a new dimension to active performance.  The audience will learn how leading international cycling brand Santini is using BeHOT with ROICA™ on select products to generate additional heat – up to 2 degrees C as the cyclist moves their body, thanks to ground-breaking heat generating technology as certified by CeRism, Outdoor Sport Research Centre at Verona University.
 
 Witness ROICA™ partners as leaders in high-tech performance fabrics for the world of sports for riders that want to stand out. The unbeatable collection of well-constructed fabrics that revolutionize the premium stretch market at the following EUROBIKE Exhibitors:

• M.I.T.I. SpA (IT)
• Maglificio Ripa (IT)
• Piave Maitex (IT)
• SITIP SpA (IT)
• SOFILETA (FR)
• Sportwear Argentona S.A. (ES)

This July at Interfilière, discover responsible innovation and well-being at the ROICA™ booth.

ROICA™ partners create innovative fabrics for the Modern Wardrobe. See, feel, imagine and learn why brands are choosing ROICA™, view the collection of superior functional fabrics that revolutionize the premium stretch market, thanks to advanced yarn solutions dedicated to specific needs of the contemporary consumer.

Spearheading the stretch market, ROICA™ elevates new standards for intelligent contemporary consumers. ROICA™ representatives will excite you as they demonstrate functionality, their advanced color technology system, and show you a fantastic range of stretch innovations from smart shapewear to soft compression that can enhance designs. Come visit the ROICA™ booth to learn about the ongoing commitment to responsible innovation and creativity. As you enter, you will experience 3 Modern Wardrobe concept zones that showcase:

1. ROICA™ Lifestyle – a beautiful selection of commercial lingerie, swimwear and nightwear items from leading brands that include ROICA™, embracing the ROICA™ Eco Smart family of yarns.

2. ROICA™ Innovation – an exciting area that shares our textile partners’ innovations to inspire endless possibilities. This area will showcase lingerie concept garments for brands that will spark ideas for AW 19/20.

3. ROICA™ Lab – the zone that navigates you toward the latest hi-tech Modern Wardrobe solutions. This zone hosts unmatched premium stretch performance designed to exceed contemporary business and consumer desires belonging to ROICA™ Eco-Smart family and ROICA™ Feel Good family .

ROICA™ Eco-Smart family, the world's first range of responsibly made premium stretch fibers creating ROICA™ smart yarns that offer sustainable solutions with prestigious certifications:

• Global Recycling Standard (GRS) Version 3.0 certified by Textile Exchange - ROICA™ Version 3.0 yarn constructed with more than 50% pre-consumer recycled content.
• Cradle to Cradle Certified™ Gold for product and ingredients - ROICA™ yarn evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

ROICA™ partners featuring ROICA™ Eco-Smart family include:
Giemme, Iluna Group S.p.A, Maglificio Ripa S.p.A, M.I.T.I. Spa, Penn Textile Solutions, Sofileta, Tessitura Colombo Antonio Tintex Textiles

ROICA™ Feel Good family, a brilliant range of advanced stretch fibers that deliver personal performance and measurable wellness. Thus, providing freshness and comfort metrics perfect for travel, sport, leisure and more. The family now offers a premium innovation:

• ROICA™ CF, an innovative yarn that neutralizes odors thanks to an active ingredient interlocked within the yarn. This durable stretch yarn offers a fantastic property to every wearer.

ROICA™ partners featuring ROICA™ CF include: Maglificio Ripa S.p.A., TINTEX Textiles.

ROICA™ also presents the following families through our textile partners’ innovations within the ROICA™ Innovation area:

• ROICA™ Color Perfect family - advanced color technology system that delivers a perfect color match finish with an undetectable matte look for the stretch materials.
• ROICA™ Contour family - high performance stretch yarn control that delivers a calibrated form optimizing power, softness and comfort.
• ROICA™ Resistance family - innovations linked to durability and functions to match particular applications including heat and chemical resistance in make and wear.

• In its aim to promote composites materials, JEC Group will highlight the latest technologies that enable the automotive industry to innovate in product design, emission reductions and production.

Paris - In its mission to address composites end-use industries specifically, JEC Group, the world leading organization for the promotion of composite materials, moves up a gear to target the automotive industry. Introduced many decades ago in car manufacturing, and not only for high-end performance models, composites are now offering many alternatives to steel and aluminum, thanks to their specific features, which go far beyond their lightweight properties.

“Today, nearly 2.9 cars are produced and sold worldwide every second. Yet growth potential is still enormous. In value, the automotive industry makes up 20% of the total composites market with promising opportunities for lighter, stronger and more efficient materials in the years to come. They offer new design opportunities, enable a reduction in tooling investment and allow several functions to be integrated in one, on top of their corrosion and impact resistance. Furthermore, composite materials contribute to the development of a new generation of cars, offering innovative battery integration solutions for electric vehicles, as well as a new generation of fuel storage tanks for hydrogen-powered vehicles. JEC Group is moving forward in its strategy to democratize and promote the use of composites materials among end-user segments that, in this case, are OEMs and car manufacturers,” said Ms Frédérique MUTEL, JEC Group President & CEO.

The BMW i3 the largest-volume production car ever to extensively use composites for emission-free mobility

With this in mind, JEC Group will invest in a significant number of composites pavilions at key automotive events in Europe, America and Asia. The first of these will be at Mondial.Tech Paris, part of Paris Motor Show, held on October 2-6, 2018 in Paris. The composites pavilion will include an innovation showcase, expert presentations and networking activities.

The second composites pavilion will be at the North American International Auto Show in Detroit on January 14-18, 2019 and will focus on the same goals of sharing knowledge and developing networking.

Additional events, particularly in Asia, are being planned to cover the global automotive market.

Although the composites pavilions are organized by JEC Group, they will be supported by major composites manufacturers. These combined efforts will enable stands to showcase several solutions provided by composites for the automotive industry, driving innovation in this sector.

• JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

• Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

• Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

• Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

• Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

• Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

• Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

• A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

• A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

• The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

• “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

As the global textile industry’s most comprehensive sourcing summit for the spring / summer season, Intertextile Shanghai Apparel Fabrics is naturally the ideal place to find the latest developments in product innovation and sustainability. This is especially true in the fair’s Beyond Denim zone, which this edition will feature over 110 exhibitors from China, Japan, Pakistan, Turkey and elsewhere. Adding to a total of some 3,300 exhibitors from around 22 countries and regions, they provide sourcing options for the entire industry, from fabrics for ladieswear, menswear, suiting, shirting, lingerie and swimwear to high-end wool fabrics, original pattern designs, functional & performance fabrics, sustainability products & services, digital printing technologies, garment & fashion accessories and more.

Denim enriched with volcanic ash: the latest innovation from Orta Anadolu
Volcanic ash is not uncommon in beauty products – it is known as Mother Nature’s skin purifier after all, and used as an exfoliator for example – but it is far less common in the textile industry. Orta Anadolu are set to change that with their BIOWARE denim which is enriched with mineralised volcanic ash to create an odour absorbing effect. This technology captures and absorbs odour compounds that would normally pass through the fabric, neutralising bad bacteria while retaining the helpful bacteria that common deodorisers, which contain harsh substances, normally eliminate. This leads to a more environmentally friendly product that is better for the user’s skin.

Orta will also be presenting BIOCHARGE at Intertextile, which, according to the company, is the world’s first denim fabric for muscle wellness. Infused with minerals, Orta state that BIOCHARGE is medically proven to refresh muscles, relieve muscle tension and optimise body balance. They will also present their BOUNCE stretch range, with high elasticity and a ‘street’ style, while CHRONICLE, another in their S/S 19 range, is a blend of heritage and future styles.

US Denim Mills blend tomorrow’s technology with yesterday’s style
Another innovative denim firm exhibiting at Intertextile Shanghai, and another blending old and new, is US Denim Mills. According to the company, their collection at the fair will “harness tomorrow’s textile advances to revitalise the great style visions of the past by adding fashion, comfort, performance and sustainability advantages to authentic denim looks.” This collection includes:

• Selvedge: using the company’s legacy selvedge looms to produce bi-stretch ‘SelvedgeX’ while experimenting with blends of natural yarns and high-tech fibre blends in its ‘HeritEdge+’ range
• Stretch: including ‘Flex 360’ bi-stretch denim with a slight cross-bias freedom, and ‘Modern Stretches’ with a higher stretch range for intense comfort
• SoftWear: advanced finishing treatments for superior soft touch from natural fibre blended yarns and softness-selected weaves
• Sustainable: new additions to the range of recycled and natural ‘GreenEgo’ denims

Kipas Denim step up their sustainability efforts
Well aware of the effect denim production has on the environment, Kipas Denim’s multi-faceted programme to address this is one of the most comprehensive in the denim sector. Their recycled yarn initiative includes recycling waste yarn from the production process, while it also takes waste cotton yarn and blends it with REPREVE® fibres to create an eco-friendly denim fabric. Kipas also uses BCI cotton and organic cotton, and targets each to be 15% and 5% of total consumption, respectively. Furthermore, their Conservablue technology aims to reduce the environmental impact of the dyeing process by eliminating the use of rinsing overflow boxes before and after the indigo dye boxes, as well as ensuring 100% of applied dyestuff remains on the yarn in the rinsing bath.

As well as the overseas offerings, a wide range of domestic denim exhibitors covering all price and quality points will also feature in Beyond Denim. Some of the more notable brands participating include Advance Denim, Black Peony, Guangzhou Foison and Prosperity Textile.

Denim’s ‘next move’ to be debated in INVISTA panel discussion
The market is changing and so must apparel and textile manufacturers. Low prices and discounts are no longer driving sales the way they used to. Today’s consumer wants better quality, appreciates new technology and is evolving their casualwear style. This is the premise behind the INVISTA-sponsored panel discussion which will take place on day 1 of the fair. Titled ‘Denim’s Next Move – New Opportunities to Keep Growing Sales of Jeans and Casualwear at Retail’, participants will learn what consumers really want in jeans and casualwear, the return of chinos and new fabric technologies that are energising casualwear.

The panel will be moderated by Jane Singer, Director and Head of Market Development at Inside Fashion. Panellists will include representatives from Advance Denim, Guangzhou Conshing Clothing Group, Prosperity Textile and Texhong who will share their latest innovations that will help brands and retailers drive sales and profits.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.