From the Sector

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Stable and efficient yarn production is hugely important to yarn manufacturers. Not only does the evenness of the tangling knots make the investment interesting, so too does the energy efficiency of the RoTac³. The tangling unit requires up to 50 percent less energy for generating compressed air. Against the background of rising energy prices, this represents an excellent prerequisite for optimizing production costs.

Oerlikon Neumag has been able to secure various retrofit contracts since the launch of the RoTac³ in 2015. And new systems are predominantly equipped with RoTac³. The RoTac³ is included in the standard scope of delivery for the newer BCF S8 system. The tangling unit is available as an option both for the single-end Sytec One system and the three - end S+ and it can also be retrofitted on request.

A close eye on quality with the Eye Compact II

Eltex of Sweden AB, a member of TMAS, the Swedish textile machinery association, reports solid success with its Eye Compact II yarn monitoring system for carpet tufting machines, since its launch at ITMA 2019 in Barcelona last June.

The sensor units of the Eye Compact II,Brian Hicks, Eltex CEO explains, have been successfully miniaturised to approximately a third of the size of those with the established Compact system, allowing them to be mounted on the very latest high speed tufting machines that are graphics driven, with limited space at the puller rollers.

Early stage prevention
Unlike the sensor systems that are employed at later positions on tufting machines – in order to detect faults in the formed fabric – Eye Compact II technology is about prevention at an earlier stage, through the detection of missing yarns.

Critically, the sensors need to be installed after the last puller roller and before the tufting needles, because otherwise the roller could still be feeding yarns that will not been successfully taken by the needles. This is only possible with the extremely slim Eye Compact II units, which can also be positioned either above or below the rollers.

Guarantee
Another benefit is that the sensors can be arranged more closely together, with each of them monitoring 16 yarn positions, and their robustness ensures that once fitted, there is little the technicians or operators need to do.

Automatic
The Eye Compact II system easily learns pattern changes and displays the number of yarns involved to the operator for confirmation, and different parameters for different yarns groups can also even be set if required. With its research and development work primarily carried out at its headquarters in Osby, Sweden, and North American sales and service operated from its subsidiary in South Carolina, the manufacturing plant of Eltex has been located at Templemore in Ireland since 1976, providing significant advantages in terms of high flexibility and logistical services to customers on both sides of the Atlantic.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Color Pop Compacting also for PA6 yarns
Until now, it was difficult to produce highly color-separated or accentuated BCF yarns from polyamide 6, but in the future, this will be possible thanks to the CPC-T. Thanks to the new design, the CPC-T is now also suitable for processes with low thread tensions.

DOMOTEX asia/CHINAFLOOR (March 24-26) – the leading trade show for carpets and floor coverings in the Asia Pacific region - expands the design and conference area and welcomes new and returning brands.

Shanghai - For the 22nd edition, each flooring sector will have a theme. The highlighted product category in wood is solid wood for ground heating systems. The category is taking over the entire hall showing new technologies, new designs and new products in floor heating. Solid wood for ground heating systems is growing in China – according to China National Forest Products Industry Association, around 80% of China's wood flooring brands have developed the product.

At the same time the market share is increasing by more than 30% annually. It is expected that by 2025, the market size of solid wood for ground heating systems will reach RMB 10 billion (approx. 1.4 billion USD). The international and local market leaders, such as Junckers, Foglie d’Oro, Edelholz, IBF, Teclic, Nature, Fudeli, Bloor, Jinyi, Licher, Nuogao and Moganshan have already confirmed their participation at the show. Also in this hall we see the latest developments in the market in the dedicated InnovAction campaign.

The resilient flooring section will be spread out to 69,500 sqm gross, featuring Stone Plastic Composite (SPC) flooring. Among the resilient halls, there will be an “Inspiration Hall”, housing InnovAction campaign and design forum, where famous interior designers will educate the audience on using resilient flooring in interior. The InnovAction will be upgraded by showcasing the new products within matching interior spaces. This new way of presenting the InnovAction products is ideal for both manufacturers to share the ideas and for visitors to keep up to date with the market trends.

Carpet section will promote carpet as a driving force for interior design, with a dedicated hall being the epicenter of home and design carpets and the host hall for the Luxury Brands Carpet Show – a showcase of the most sought-after international high-end carpet design brands. After the successful first edition in 2019, Chinese Original Carpet Design Show comes back to promote the works of young Chinese carpet designers. Country pavilions from Germany, Belgium, Iran and Turkey will also showcase their products among the carpet halls. Traditionally DOMOTEX asia/CHINAFLOOR has been focused on B2B, however due to the market changes, the end users are more and more welcome to the show. In order to give the oriental carpets and rugs the spotlight and follow the trends, Indian and Afghanistan pavilions will be creating a new area - “Treasure of Orient”.

In 2020, DOMOTEX asia/CHINAFLOOR will cover more than 185,000 sqm of gross space, taking up 16 halls at the Shanghai New International Expo Center. Five of the exhibition halls will be dedicated to carpets and rugs, four to wood, bamboo and other hard floors, 2 to FLOORTECH asia and 5 halls to resilient floor coverings. In 2019, the show gathered 1,579 exhibitors from 36 countries and attracted 66,875 trade visitors, of which 15,092 international, coming from 107 nations.

PIAVE MAITEX, recognized as a preferred partner for the global textile industry, brings on the successful path of responsible and smart innovation and presents its unique line “AGAIN”, during the MarediModa fair in Cannes.

During the Functional Fabric Fair, the trade-exclusive event where the latest trends in fabric development for the functional textile industry are showcased, PIAVE MAITEX presents AGAIN a smart and technically advanced line, that balances performances, functionality and sustainable features, formed of highly performing jerseys. Two premium Global Recycled Standard (GRS) certified sustainable ingredients have been involved in the production of AGAIN: the premium stretch fiber ROICA™ EF – part of ROICA Eco-Smart™ Family – constructed out with more than 50% pre-consumer recycled content and perPETual high quality sustainable polyester born from a cost-effective process that reverses engineer consumer waste PET bottles.

In addition to the two key high-tech, responsible and GRS certified raw materials, the Italian manufacturer will present a new development characterized by sustainable water-saving printing, with the possibility to be color-customized. Moreover PIAVE MAITEX will showcase the unique and innovative combination of two AGAIN articles to obtain an entirely sustainable bonded fabric with the possibility of personalized colour combinations. The range of functional fabrics, dyeable and transfer printable, perfectly combines creativity, innovation, real performance and sustainability all at once offering unparalleled comfort, performance, and tenacity.

Miles Johnson and Creative Room™ designed a capsule collection “Light on the Land”, for men and women to showcase ISKO™’s R- TWO™ program.

As the world’s leading ingredient denim brand, ISKO™ is at the forefront of the sustainable and responsible fashion movement. ISKO™, who loves to partner with likeminded designers, brands and retailers in the  industry that have a passion for Responsible Innovation™, is proud to announce its partnership with renowned British fashion designer Miles Johnson. Together they have created a visionary collection that will be launched at a private showing event on September 12th, at the Fremin Gallery in New York City.

For those who love denim and cherish the planet, this partnership is a perfect match as  Miles is known for prioritizing sustainability and responsibility in his work. Miles has held leadership positions such as Design Director at Levi Strauss & Co. and Senior Creative Director of Product Design and Development at Patagonia, Inc., where he served as a pioneer in creating clothing using sustainably sourced materials. For this capsule collection, Miles worked side by side with ISKO™’s Research & Development team utilizing the ISKO R-TWO™ program which combines a mix of reused and recycled materials. The reused cotton comes from ISKO™’s own production loss, which they continuously track and trace. This has the CCS (Content Claim Standard) certification. They combine this reused cotton with recycled polyester derived from PET bottles. Depending on the content, fabrics can have the RCS (Recycled Claim Standard) certification or GRS (Global Recycled Standard) certification.

The creative direction for the collection takes form with “Light on the Land” and the whole collection is made using low impact materials and responsible finishing techniques. Miles and the ISKO™ team carefully crafted 34 designs at the Creative Room™ in Italy. The styles incorporate responsible design principles which include:

• Minimal washing;
• Removable trims made of eco-metal;
• Natural based buttons and labels;
• Green bar tacks;
• Embroidered rivets.

Environmental messages are embroidered on six of the pieces, by the artist Giulio Miglietta. The garments are built to last and the more you wear these pieces, the more beautiful they become.

With the announcement of the eligible vehicle models, the World Car Awards 2020 kickedoff today at the IAA Motor Show in Frankfurt, Germany. This year again, the majority of contenders is equipped with lightweight components for acoustic and thermal management from Autoneum. The world’s leading automobile industry awards will be presented at the New York Motor Show in the spring of 2020.

A total of 46 new vehicle models have passed the initial screening and are now contenders for trophies in the categories “World Car of the Year”, “World Luxury Car”, “World Performance Car”, “World Urban Car” and “World Car Design of the Year”, including five new fully-electric models alone. Whether it’s a lightweight underbody, a noise-absorbing carpet system or a heat-reducing engine encapsulation – most of the eligible vehicles benefit from Autoneum’s innovation leadership in thermal and acoustic management. Autoneum’s expertise extends to new forms of mobility such as electric vehicles: Also thanks to numerous Autoneum components, Jaguar’s fully-electric SUV “I-PACE” impressed the jurors for the World Car Awards 2019, which was the first model ever to be named “World Car of the Year”, “World Car Design of the Year” and “World Green Car” at the same time.

On the occasion of today’s eligibility announcement, Autoneum CEO Martin Hirzel said: “Once again, the contenders are testimony to our innovation leadership. The World Car Awards also confirm our forward-looking approach: Nominated e-models feature Autoneum components as well. Welcoming our industry’s transformation early on, we today supply environmentally sustainable, lightweight components for most electric models available worldwide.”

Gerry Malloy, President of the World Car Awards Association, added: “As a market leader, Autoneum is the ideal partner for us. Our shared commitment to innovation was a decisive factor in forming a partnership back in 2014. Nowadays, this is a crucial aspect for manufacturers and suppliers who wish to remain successful in times of industrial and technological change.”

The World Car Awards, which have been presented annually since 2004, are the world’s leading nd most widely recognized automotive industry awards. A jury comprising of more than 80 international automotive journalists selects winners in five categories. The winners of the 2020 World Car Awards will be announced in April next year at the New York Motor Show.

During the Functional Fabric Fair, the trade-exclusive event where the latest trends in fabric development for the functional textile industry are showcased, PIAVE MAITEX presents AGAIN a smart and technically advanced line, that balances performances, functionality and sustainable features, formed of highly performing jerseys. Two premium Global Recycled Standard (GRS) certified sustainable ingredients have been involved in the production of AGAIN: the premium stretch fiber ROICA™ EF – part of ROICA Eco-Smart™ Family – constructed out with more than 50% pre-consumer recycled content and perPETual high quality sustainable polyester born from a cost-effective process that reverses engineer consumer waste PET bottles.

• Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.