From the Sector

Built on an island right off the Finnish capital Helsinki, the Nolla cabin represents an ecological alternative to cabin life.

This summer, living with minimal emissions will be put to the test. Neste is building a prototype of a cabin that has a minimal environmental impact in terms of both carbon dioxide emissions and concrete impact on nature. The Nolla (= zero) cabin, designed by Finnish designer Robin Falck, is located just outside Helsinki city center, on the Vallisaari island. The cabin has been built from sustainable materials and is designed for a simple lifestyle with minimal to no emissions, taking into account the surrounding nature in every respect.

Located on the idyllic island of Vallisaari in the Helsinki archipelago, the Nolla cabin encourages people to consider how modern solutions and innovations could enable sustainable cabin living. Vallisaari has been in a natural state for decades and is thus the perfect location for an urban cabin experience, located at a 20-minute boat ride away from the Helsinki market square. The ecological and mobile Nolla cabin will be in Vallisaari until the end of September, demonstrating a lifestyle that generates minimal to no emissions.

Placing the compact and mobile cabin on its private lot does not require a construction permit
and it has been designed to use building materials as effectively as possible. The cabin is the size of a small bedroom and can be assembled and transported without heavy machinery, leaving its environment nearly untouched. The Nolla cabin has been designed by Finnish designer Robin Falck, whose earlier design, Nido cabin, has been globally acknowledged.

The Nolla cabin introduces solutions, which enable minimizing cabin life emissions remarkably. The energy supply of the cabin is entirely renewable; electricity is generated by solar panels, whilst the Wallas stove, reserved for cooking and heating, runs entirely on Neste MY Renewable Diesel, made 100% from waste and residue. The Aava Lines raft operating between Helsinki city centre and Vallisaari will also run on Neste MY Renewable diesel that can reduce greenhouse gas emissions by up to 90%.

“With the Nolla cabin, we want to offer visitors the possibility to experience modern cabin life in the realm of nature, with minimal emissions. An ecological lifestyle does not only require giving up unsustainable commodities, but also discovering modern, sustainable solutions that can be used instead. This has been an essential part of the design process”, says Falck.

“Finns are known for spending time at their beloved summer houses. We wanted to explore sustainable solutions that could enable cabin life with minimal emissions. Shared and circular economy, as well as new technologies and innovations have made it possible to enjoy our cabins without harming or burdening the environment. Some of the solutions that have been used at the Nolla cabin are perfectly adaptable at any cabin”, says Sirpa Tuomi, Marketing Director at Neste.

The Nolla cabin is executed in collaboration with Fortum, Wallas and Stockmann and is part of the Journey to Zero project by Neste, which explores new ideas and aims to steer the world towards a cleaner future with fewer emissions.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced it has acquired all remaining minority shares in M. Dohmen S.A., an international group specializing in the production of textile dyes and chemicals for the automotive, carpet and apparel sectors.
 
Since its corporate carve-out from Clariant in 2013, Archroma is set on becoming a clear industry leader in supplying innovative chemistry solutions, with the goal to make the industries it serves more sustainable. Archroma made a first move in this direction when it acquired the textile chemicals business of BASF in 2015.
 
Archroma first acquired an interest in the capital of M. Dohmen S.A. with a 49% share in 2014 followed by an additional 26% share in 2017. Now, it has completed the acquisition of the remaining 25% share of M. Dohmen S.A.
 
Archroma is already serving customers of both companies with the combined product portfolio on all markets where both companies have a presence. Archroma and M. Dohmen product portfolios ideally complement each other, especially in the area of dyes and chemicals for synthetic fibers and wool, including for the automotive sector.
 
Archroma will now be able to proceed with the full integration of the M. Dohmen organization into Archroma, which will allow its experts worldwide to better focus on serving its customers’ needs and requirements.
 
“With this final step in the acquisition of M. Dohmen”, comments Marcos Furrer, President Brand & Performance Textile Specialties and Innovation at Archroma, “customers of both companies will now have access to even more products and solutions that work in their processes and markets, supported by Archroma’s leadership towards quality, innovation and sustainability.”
 
“I am proud to hand over a company that we have built from the ground up to what it is today, a recognized specialist in automotive and technical textile dyestuff”, said Manfred Dohmen, founder of the M. Dohmen group. “In the past 4 years, we have worked hand in hand with Archroma to pass on a solid business and a solid team who is ready and excited to further support the creativity and performance required by our customers.”

Wolford is recognized for high quality Skin wear and is a favorite among fashion influencers. Wolford realizes that when it comes to luxury, consumers expect brands to be responsible. In response, Wolford understands sustainable luxury is a new brand ingredient and are dedicated to expanding their collections each season and infusing responsible materials.

This July at Interfiliere, gain a sneak peek into the launch of Wolford’s Aurora collection of leggings and pullovers that are Cradle to Cradle gold certified, first one in the world! The new styles created use premium stretch yarn belonging to the ROICA™ Eco-Smart family, the world’s first yarn awarded Cradle2Cradle Material Health Gold Level Certificate and Hohenstein Environment compatibility certification, which provides evidence of compliance and offers confidence as a responsible choice. In addition to premium stretch yarn from ROICA™ Eco-Smart family, the Aurora pieces are made using two other responsible fibers, Lenzing Modal® a cellulosic fiber derived from sustainable forestry, and infinito® by Lauffenmühle, a specially modified oil based biodegradable polymer.’

Instead of using new materials, Wolford’s new collection is developed to return the ingredients back to the cycle, they simply borrow them for the lifetime of the product, which supports responsible product ingredient sourcing. At the end of the Aurora collection product lifecycle, Wolford will return them to an industrial composting station to naturally breakdown without releasing harmful environmental substances. Wolford is committed to becoming part of the solution and activating change as they continue to explore responsible material innovations.

Be sure to attend Première Vision NY Smart Talk on July 17th, 2018 at 2:00p to meet to Wolford’s own Andreas Roehrich, Director, Product Develoment & Innovation to discuss technology and Wolford’s quest to become a responsible luxury brand.
 

„Algorithmen übernehmen die Aufgaben von Marketing-Mitarbeitern“ – mit dieser Schlagzeile wurden kürzlich Umstrukturierungsmaßnahmen beim Onlinehändler Zalando kommentiert. Tatsächlich setzt das Berliner E-Commerce-Unternehmen bei seinen Marketingaktivitäten zukünftig stärker auf Künstliche Intelligenz. Ziel ist dabei, das Kauf- und Klickverhalten der Kunden noch schneller und genauer zu analysieren, um ihnen individuellere und passgenaue Angebote machen zu können. Werbemails oder Push-Nachrichten, die bisher von Marketing-Mitarbeitern gestaltet und versendet wurden, werden dann von Algorithmen oder Künstlicher Intelligenz gesteuert.

Die Neuausrichtung des Marketings macht deutlich: Künstliche Intelligenz ist längst kein Science-Fiction-Szenario mehr, sondern beeinflusst schon heute ganz konkret die Bedingungen in der Konsumgüterbranche. Weitere Beispiele für aktuelle Anwendungsgebiete sind selbstfahrende Autos oder kassenloses Bezahlen, wie es seit kurzem von Elektronikhändler Saturn in seinem Innsbrucker Store Saturn Express getestet wird.

Der von GS1 Germany initiierte Expertenkreis Innovation bestätigt, dass Künstliche Intelligenz zu den wichtigsten Technologie-Trends in den kommenden Jahren gehört. Hintergrundinformationen sowie Handlungsempfehlungen für Unternehmen sind in dem neuen Trendradar 2018 nachzulesen, der ab sofort zum kostenfreien Download auf der Website des Kölner Unternehmens zur Verfügung steht. Der Trendradar soll als Frühwarnsystem dienen und beantwortet konkret, welche aktuellen Entwicklungen tatsächlich relevant sind und frühzeitig strategische Entscheidungen in den Unternehmen der Konsumgüterbranche erfordern.

Die wichtigsten Trends: von Blockchain über kassenloses Bezahlen bis Virtual Reality
Das Expertengremium mit Vertretern aus Handel, Industrie, IT, Logistik, von Start-ups und aus der Wissenschaft hat in mehreren Workshops aus einem Gesamt-Pool von 120 innovativen Themen die zehn wichtigsten Technologie-Trends identifiziert, die in den nächsten drei Jahren ihr disruptives Potenzial entfalten werden und mit echtem Mehrwert für die Endkunden verbunden sind. Neben Künstlicher Intelligenz definierten sie autonomes Fahren, Blockchain, Cyber Security, E-Commerce im Frischebereich, erweiterte und virtuelle Realität, kassenloses Bezahlen, Plattform-Ökonomie, unsichtbare Identifier und virtuelle Regale als wichtigste Entwicklungen für die Branche.

„Trends frühzeitig erkennen, neutral bewerten, Erkenntnisse teilen und damit ein Innovations-Frühwarnsystem für unsere Community etablieren - das ist der Anspruch, den wir mit unserem Trendradar erfüllen möchten“, erklärt Regina Haas-Hamannt, Leiterin Innovation bei GS1 Germany. Der Trendradar bietet zu jedem der zehn Trends eine detaillierte Erläuterung sowie eine Analyse seiner Bedeutung aus Sicht der Shopper und aus der Perspektive von Handel und Industrie. Reale Anwendungsbeispiele zeigen die aktuelle Relevanz auf und Handlungsempfehlungen der Empfehlungen runden die Trendanalyse ab. Darüber hinaus gibt der Trendradar einen Überblick über weitere wichtige Entwicklungen für die Branche.

Archroma, a global leader in color and specialty chemicals, will be presenting its innovative and sustainable denim solutions for manufacturers and brands at DenimsandJeans Vietnam 2018, on June 27 and 28.
From fiber to finish, Archroma offers a scope of possibilities for effects and colors, from the authentic roots of indigo to the most innovative and eco-advanced solutions. Archroma is a recognized leader in integrated solutions, offering best-in-class auxiliaries for bespoke process packages.
Visitors will be able to discover solutions designed to make denim in a more sustainable and responsible way, in particular:
DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan.

• Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.
• Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process! Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.
The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  Colors other than blue have been tricky to achieve in the past. With Optisul® C dyes, denim manufacturers can expand their color horizons with this range of six dyes especially designed to produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors. They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles. At the booth, Archroma will display an “illustration collection” of exciting indigo casts.
• Diresul® blacks & greys, a universe of greys and deep black and navies.
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
As consumers increasingly aspire to functional, beautiful and meaningful clothing, brands and manufacturers are increasingly interested in the environmental impact of the denim industry. Archroma has placed sustainability at the heart of its innovation process to create products and processes that improve the industry’s sustainability.
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

SOLUTION PACKAGES FOR SUSTAINABILITY
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.

Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“Innovation and sustainability go hand in hand,” says Paul O’Prey, Head of Sales, Brand & Performance Textile Specialties, Archroma, Vietnam. “While developing new products and services, we always consider the environmental impact so they are as sustainable as possible. This can be seen in our innovative and eco-advance products, such as the water-saving ADVANCED DENIM and the aniline-free* Denisol® Pure Indigo.”

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

• The GOTS (Global Organic Textile Standard) and OCS (Organic Content Standard) certifications obtained by the Filpucci dyeing plant add to the Clear to Wear (CTW) standard developed by Inditex Group and achieved in 2014 and to the Detox commitment, which was signed in February, 2016.
• Not only the best raw materials, but also an established knowhow in the fields of dyeing and finishing, always under the key concept of Responsible Innovation. This concept extends to each and every FILPUCCI collection and their ever-increasing offer, the roughly twenty innovative new items, the Woolen line of carded yarns and the real spearhead of premium fashion, the Collection. Among this season’s new offer: Baby Camel Re.Verso™, RWS- certified merino organic wool, Re.Verso™ cashmere, organic silks and FSC-certified viscose.
• The achievement of further certifications such as the FSC (Forest Stewardship Council) for viscose shows the care and respect towards the ecosystem as a whole, guaranteeing a product derived from a forest or a plantation forest in the respect of strict environmental, social and economic standards. The RWS (Responsible Wool Standard) finally guarantees the use of wool coming from livestock managed under rigorous criteria oriented towards the wellbeing of animals and the reduction of environmental impact.
• Filpucci Group is all about a constant vocation towards new generation values and a reliable, traceable and transparent manufacturing process, as shown by the Re.Verso™ circular economy supply chain, of which the group is a unique ambassador in the field of high-end/low-impact knitwear yarns.

With absolute quality always in mind, FILPUCCI GROUP represents a corporate model that has made of sustainability a real mission, embarking on complex paths that have brought great results with fashionable textile solutions lead by ethnical and sustainable values. Thanks to this, Filpucci’s products have become part of Patagonia Collections, an important acknowledging from the brand’s part, whose managers stated: “We are always on the hunt for the highest performing, lowest impact materials. We were thrilled to find Re.Verso ™ (95/5 transformed) Cashmere yarn from Filpucci. It allowed us to create a range of products with the insulative and soft properties of cashmere while adhering to our mission statement; build the best product, cause no unnecessary harm.”
FILPUCCI GROUP’s commitment is evident and it moves forward thanks to the passion towards responsible and innovative paths that contribute to turning the group into a reliable partner, symbol of quality and excellence.

Filpucci is also a C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy) partner.

OutDoor2018: Schoeller’s coldblack® technology has been specifically optimized for use on knitted and woven fabrics so brands can now expand their product application uses. Under the blazing sun, textiles with coldblack® heat up less and stay cool to the touch. Südwolle Group, a leading manufacturer of high quality yarns, has also recognized the ideal combination of merino and coldblack®. With this, the wear comfort of wool apparel can be tangibly improved.

Wool is well known for its various property benefits, including insulation, natural antibacterial protection, odor control, light weight and nearly wrinkle free composition. Not only in the winter time, but also in summer particularly merino wool, a special high-quality type of wool, regulates moisture balance and thus the body temperature. The fibers can absorb a great deal of moisture or sweat and transport it away from the body. Warm ambient air quickly dries the material and causes a cooling evaporation, which makes it very comfortable to wear merino apparel in the summer time.

coldblack® technology from Schoeller supports the natural properties of wool because it reliably reduces heat build-up when exposed to the sun. Together with the help of Südwolle Group, the finish has been optimized specifically for the use in merino apparel. The yarn manufacturer chooses coldblack® for a variety of uses, especially for knitting and weaving yarns for sports and outdoor apparel and develops such products individually according to its customers’ requirements.

Stéphane Thouvay, Managing Director Product Management & Innovation at Südwolle Group, summarizes the use of the technology as follows: “coldblack® is part of our product range for the summer time, which we will be presenting at OutDoor show in Friedrichshafen. The technology reduces not only heat build-up, but also enhances the natural UV protection of wool without affecting the look and feel of the fabric. Therefore coldblack® perfectly fits into our yarn selection for sports and outdoor apparel, for example in our collection ʻYarn in Motion’. For end consumers garments made of coldblack® yarns can optionally be labeled with hangtags.”

When used in high-quality woolen fabrics, coldblack® has already proven its performance and is being used by renowned brands in various collections of men’s suits. Since 2008, the technology has been licensed by more than 200 brands, in sports particularly in the field of cycling, triathlon and golf. All components of the finish are bluesign® approved.

• Archroma joins hands with Lahore University of Engineering & Technology to foster innovative research in textiles

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals, announced it has signed a Memorandum of Understanding (MoU) with the University of Engineering & Technology (UET), Lahore, Pakistan. The MoU will pave way for cooperation initially for a five-year period.

The partnership will explore innovations in textile research with futuristic visualization for Pakistan to help the Pakistan textile industry to keep in line with the fast pace of global apparel requirements and evolutions. Both partners will jointly hold sessions to prepare students for the challenges of the textile industry through in-house training sessions, developmental projects, research in textile applications and process innovative methodologies by pioneering value additions. The students of UET will also be able to join internship placement programs at Archroma Center of Excellence at Karachi.

The MoU was officially signed at a ceremony recently held in Faisalabad by Prof. Dr. Fazal Ahmed Khalid, Vice Chancellor of UET and Mujtaba Rahim of CEO Archroma Pakistan Limited.

Speaking at the occasion, Mujtaba Rahim said: “We, at Archroma, believe in continuous improvement and challenging the status quo leading to enhance sustainable growth especially in our product lines creating value for our stakeholders. Through this initiative of mutual cooperation, we will be able to share latest knowledge and technical developments and to work together with the faculty and research team of UET. We also wish to share the innovative textile solutions of Archroma with the students enabling them to enhance their academic performance. Our MoU will go a long way in adding value in the fast growing textile segment, from education to R&D development.”

“This partnership is going to have far-reaching impact in textile research which will bear highly positive results for UET and Archroma. Our academic team has already collaborated with Archroma on projects that will have a far reaching impact on the textile industry. We are very enthusiastic about formalizing our mutual relationship and look forward to interesting research outcomes. Industrial liaison of students will create confidence and the training, internships and working sessions will benefit them in their career development,” Prof. Dr. Fazal Ahmed Khalid commented.

Business networking event on the future of leather interiors

Lectra, the technological partner for companies using fabrics and leather, welcomed guests from all areas of the automotive leather supply chain at its International Advanced Technology Center (IATC) in Bordeaux-Cestas, France, for two action-packed days of demonstrations, workshops and talks by industry experts during the fourth annual “Go Digital” automotive leather event.
Building on the previous editions’ themes of digitalization of manufacturing processes and the adoption of Industry 4.0 principles, this year’s presentations focused on the value creation enabled by leveraging manufacturing data. A showcase for the innovative applications Lectra is developing based on Industry 4.0 principles, the company’s trade gathering demonstrated how disruptive new technologies are enhancing the onboard experience while reorganizing the automotive interiors supply chain.

Several guest speakers provided insight into the ways industry megatrends are impacting the automotive cockpit of the future. As motorized vehicles become increasingly autonomous, connected and electrified, cementing their place in the shared mobility landscape, suppliers must now devise new strategies to achieve profitable growth. Traditional business models are losing ground to cross-functional collaboration partnerships, making it even more challenging to compete in the fast-moving connected, shared economy.
“It is disruptive for the entire automotive supply chain,” remarks Nathalie Saint Martin, Vice President, Group Purchasing, Faurecia. “We are all learning to evolve together and enhance the added value to our end-customers. The level of collaboration we are now seeing among suppliers is unprecedented.”

Other keynote speeches included market research consultancy Frost & Sullivan’s analysis of automotive trends in the data-driven economy, Testing, Inspection and Certification (TIC) specialist Bureau Veritas’ vision of data protection for automotive and a presentation of industry insights firm WardsAuto’s selection of top 10 best vehicle interiors of 2018.
The event enables a diverse array of supply chain players in automotive interiors to gather with their peers. "Events like this one are a great opportunity to talk face-to-face with other suppliers about industry-wide challenges,” notes Claus Lattner, Director Engineering, Process Management, CoC Cut Sew Wrap Global, Yanfeng Automotive Interiors. “It is not often we find ourselves in the same room to talk about consumer perception and the sustainability of leather, for instance."

“The event provided a great opportunity to interact with suppliers who have a direct impact on innovation in interior design and manufacturing,” said John Sousanis, Managing Director of Wards Intelligence.
For Javier Garcia, Senior Vice-President, Automotive Sales, Lectra, bringing together the automotive leather community is especially important as it rises to new business challenges stemming from continually changing consumer habits and the digitalization of manufacturing processes. “Connectivity and occupant comfort are increasing the amount of high-tech content in automotive interiors, but the up-market appeal of leather makes it a constant,” states Javier Garcia. “By fostering exchange, Lectra is doing its part to help the automotive leather ecosystem evolve to meet new consumer expectations.”