From the Sector

• Guidelines of the EU Commission to implement the Single-Use Plastics Directive have been published
• Uniform labelling obligation for wipes and feminine hygiene products containing plastics as of July 03, 2021
• Lenzing’s wood-based, biodegradable VEOCEL™ branded fibers as a sustainable alternative to plastic

The Lenzing Group welcomes the issuance of the guidelines for the implementation of the Single-Use Plastics Directive (EU) 2019/904, which took effect on June 05, 2019¹. In these guidelines, the EU Commission specifies which products fall within the scope of the directive, thus providing clarity in the joint fight of the EU member states against environmental pollution from plastic waste. Lenzing’s wood-based, biodegradable cellulosic fibers such as those of the VEOCEL™ brand comprise a sustainable and innovative solution to this man-made problem.

Uniform labelling rules for some single-use plastic products
The Commission implementing regulation (EU) 2020/2151 applying to the Single-Use Plastics Directive stipulate uniform labelling requirements for some of the single-use plastic products on the packaging or the product itself starting on July 03, 2021. They encompass feminine hygiene products and wet wipes for personal and household care containing plastic.

Consumers want sustainable hygiene products
Even before the implementation of the Single-Use Plastics Directive, Lenzing already gives consumers clear guidance in their purchasing decisions. Products bearing the VEOCEL™ brand logo on their packaging are produced in line with stringent certification criteria. As a consequence, consumers can be assured that the products contain biodegradable, cellulosic materials.

A Marketagent survey carried out in German-speaking Europe in October 2019² concluded that nine out of ten consumers would immediately change their purchasing behavior for wipes if they found out that their current product contains plastic. This would seem to imply that new market dynamics will emerge once the labelling rules for single-use plastic products takes effect. According to a Smithers Report³, about 500,000 tons of petroleum-based fibers are used each year for the production of wipes.

¹ Directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment
² Representative Marketagent Online survey, n = 1,005 (14 - 69 years old, from Austria and Germany). https://itsinourhands.com/
³ Smithers Report “The Future of Global Nonwoven Wipes to 2023”, published in 2018, page 23, reference year 2018

Laying the bases for a more sustainable world, adopting responsible strategies is no longer an option but an indispensable and compulsory structural revolution today and for the future to come. This topic is the subject of the Smart Voice "The Circular Stories of C.L.A.S.S.: the journey of Bemberg™ by Asahi Kasei towards a smart, responsible and contemporary luxury" organised by C.L.A.S.S. eco hub that has taken place on Thursday 27th May at 4 pm CET. 4 unique and complimentary design realities has been sharing  the  Bemberg ™ choice as unique and precious fibre ingredient that gives rise to a performing design incorporating new generation values, for their unique paths of style and fashion to offer to the contemporary consumer.

Specialist and expert of innovative fibres, during the session Ettore Pellegrini, Marketing & Sales Manager-Marketing & Sales Manager Asahi Kasei Fibers Italia, illustrated the history of Bemberg™ starting from its origins to nowadays, reporting its various applications that have been then illustrated in their uniqueness by the speakers of the session.

Paolo Verdoia, Lining research and development raw materials at Ermenegildo Zegna, who has been involved in the development of accessory raw materials for the Ermenegildo Zegna Group for 14 years. During the digital meeting he talked about priority collaborations with responsible and high quality materials such as Bemberg™, the brand's approach to sustainability and future projects.

The session has also been attended by new generation designer Gilberto Calzolari winner of C.L.A.S.S. ICON 2020, who used Bemberg™ in his latest AW 2021-22 collection entitled "At this stage".

Camilla Carrara, founder and zero-waste designer Zerobarracento says "We select Bemberg™ for our creations for two fundamental reasons: firstly, from a stylistic point of view for its extreme versatility: in the various collections we have adopted it to create Kimonos, padded jackets, wrap dresses as well as for the interiors of our garments, which are intended to be soft embraces for total physical and mental comfort. The second but no less important reason is that this fibre has circular values in line with our zero-waste commitment."

“By choosing to work with Bemberg™, we have made an exclusive and sustainable choice in order to offer tailors, designers, brands and garment manufacturers who believe in and are committed to responsible but at the same time premium and exclusive fashion a new business opportunity" says Alessandro Ivaldi Director Business Unit of Carnet, a division of Ratti Group that produces and distributes worldwide fabrics for the creation of made-to-measure garments for men and women.

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

• The FlexoCleanerBrush™, a solution to enhance print quality and improve worker safety in corrugated printing.
• The FlexoCleanPick™, a system designed to automatically remove hickeys—typically caused by paper fibers, dust and ink contamination, and other causes of printing defects—from the plate during the print run without stopping the press or requiring operator skin contact with wash agents.
• The FlexoDry2™, a fully integrated IR drying system, specifically developed for corrugated flexo printing presses, that reduces energy consumption by up to 30 percent over standard IR dryers via the use of patented Diamond IR™ lamps.
• A new generation of LED-UV technology—designed by AMS Spectral UV, a Baldwin Technology company, for wide-format flexo corrugated box printing—represents the latest in solid-state LED curing innovations and offers more than a 50 percent reduction in power consumption, compared to traditional UV systems, in an ultra-compact lamphead that fits at the end of the press or between printing units.

You can register here.

GREENBOATS, Sicomin and Bcomp are nominated as finalists for the JEC Innovation Awards 2021. The three project partners have been selected as finalists in the awards’ Renewable Energy category for their innovative Green Nacelle – the first offshore nacelle manufactured with natural fibre composites (NFC).

The Green Nacelle was designed by NFC innovators GREENBOATS, who were also responsible for the structural engineering, manufacturing and assembly of the nacelle.  By incorporating Bcomp’s ampliTex™ flax reinforcements, FSC certified balsa wood cores and bio-based resins, the Green Nacelle’s NFC construction saves approximately 60% CO2 equivalent and reduces the energy consumption by over 50% compared to a nacelle made with existing GFRP technology.

In addition to the lower CO2 footprint, the natural fibre composite structure also introduces viable options for the end of the nacelles’ life unlike traditional GFRP structures - an issue of increasing concern for the wind energy sector that presents a great opportunity for natural fibre composites to bring a sustainable change to this market.

Sicomin, the formulator and supplier of the leading range of GreenPoxy bio-based epoxy resin systems, supplied its DNV GL approved InfuGreen 810 resin system that was used to infuse the Green Nacelle’s main structural sandwich panels, as well as providing intumescent FR gelcoats, bio-based laminating resins and UV resistant clear coatings for the groundbreaking new nacelle.  Materials, as well as on-site technical support, were delivered by Sicomin’s German distributor TIME OUT Composites.

The winners of the awards will be announced during JEC Connect which will be held on the 1st and 2nd June 2021.

Marking the return of in person sourcing in New York City, the summer edition of Texworld + Apparel Sourcing New York City will be held at a location in the heart of Hudson Yards, The Starrett-Lehigh Building. Taking place July 20 - 22, 2021, this edition offers an alternative way to source. The Pop Up Sourcing Showroom combines with the improved virtual platform for an immersive sourcing experience. Unlike the typical tradeshow setting, no exhibitors will be physically present on site. Instead, thousands of fabric and apparel samples will be displayed representing suppliers from around the globe.

Introducing a brand new hybrid concept Summer 2021 at Texworld Sourcing New York City, the Sourcing Showroom is an innovative exhibition concept created to meet the needs of the current world situation. Buyers can visit the showroom to view samples in person and communicate with participating exhibitors virtually.

More information here.

At Lectra’s Extraordinary Shareholders’ Meeting held on April 30, members voted to appoint Céline Abecassis-Moedas as a new independent director. Nominated for a period of four years, she becomes a member of the Audit Committee, the Compensation Committee and the Strategic Committee.

The appointment of Céline Abecassis-Moedas to Lectra's Board of Directors will notably strengthen the Strategic Committee, which will be called upon to examine an increasing number of investment projects in innovative companies and the continued development of our offers for Industry 4.0.

Céline Abecassis-Moedas will also draw upon her international experience as an independent director, through positions held for nearly ten years at four companies in Spain and Portugal: Europac (Papeles y Cartones de Europa) from 2012 to 2019, CTT (CTT Correios de Portugal) from 2016 to 2020, CUF since 2016, and Vista Alegre Atlantis since 2020.

Céline Abecassis-Moedas, 49, is now Dean for Executive Education and Associate Professor at Católica-Lisbon. She began her career in research at France Telecom R&D, before joining Lectra in New York as an e-business product manager in 1999, then AT Kearney in London as a consultant in 2000. From 2002 to 2005, she was Lecturer in Strategy at Queen Mary University of London, then joined Católica-Lisbon University as Assistant Professor in Strategic and Innovation Management.

From 2014 to 2020, Céline Abecassis-Moedas was also Affiliate Professor at ESCP and co-scientific director of the Lectra-ESCP Chair's "Fashion and Technology".

Céline Abecassis-Moedas is a graduate of the École Normale Supérieure de Cachan, of the Université Paris Dauphine (DEA in Scientific management methods), holder of a Ph.D. in Management from the École Polytechnique and holder of the INSEAD Certificate in Corporate Governance obtained in 2017.

Under vacuum, the new BB Engineering large-area filter produces a homogeneous, pure melt with a targeted IV setting for instance, for returning polyester production waste to the melt flow, but also for achieving a homogeneous viscosity in the case of virgin material.

BB Engineering has expanded its melt filter portfolio to include a patented large-area vacuum filter designed especially for processing polyester waste. The so-called Visco+ filter is already known as the key component of the BB Engineering VacuFil recycling system. Now, it is also available as a separate and easily-integratable upgrade component for existing systems. Within this context, the uses of the Visco+ are by no means limited to just decontamination. Here, the Visco+ offers the following solutions:

• IV homogenization: if an existing production system is struggling with IV fluctuations, the Visco+ is able to actively intervene and balance out any irregularities;
• IV increase: if the final viscosity is insufficient when processing recycled materials, the Visco+ can increase the IV without the negative impact of long residence times.

In this way, the Visco+ enables fast and flexibly-controllable viscosity build-up and reliable viscosity monitoring of the polyester melt using a to-date unique, patented process. Depending on the intended end use, the melt can be ad-justed to the further processing procedure in a targeted manner. The requi-site melt properties above all the intrinsic viscosity, but also the purity and homogeneity are achieved in a reliable and reproducible manner and can also be adjusted during ongoing operation.

As a melt filter, the Visco+ operates like a liquid-state polycondensation unit. A maintenance-intensive reactor or a deposit-prone stirring unit are not required. Moisture is removed from the PET in the filter, which – in conjunction with an adjustable residence time – results in the desired IV increase in the vacuum. This enables a controlled IV build-up of up to 30%. The intrinsic vis-cosity is the central quality figure in PET recycling and rPET processing. It determines the melt performance in the downstream production process and the properties of the end products. The intrinsic viscosity is continually moni-tored by means of an integrated viscosity measurement unit and reliably adjusted in the event of deviations (caused by disparate input qualities, for ex-ample). At the same time, the filter provides an enormous material surface compared to the volume and continuously renews this. To this end, contamination can be removed particularly effectively from the starting material by means of automatically-regulated high-performance vacuum (1-30 mbar).

The Visco+ is particularly suitable for recycling PET waste that is to be reused for high-end products.

International technology Group ANDRITZ has always been at the forefront in providing innovative and sustainable solutions for the global nonwovens industry. Optimization of resource management, especially reducing the consumption of raw materials and other substances used and also keeping resources in use for as long as possible, are decisive factors in enabling nonwovens producers to offer competitive and sustainable products.

As a world market leader for nonwovens production equipment and services, ANDRITZ offers a full range of products to meet these challenging demands.

Maximizing the evenness of the product across the entire production line is one of the key success factors. The weight profiling product range of ANDRITZ – consisting of ProDynTM and ProWidTM – has been extended by ProWinTM. This new development is the combination of the two existing systems ProDynTM and ProWidTM. It allows nonwovens producers to achieve optimum weight profiling at the crosslapper delivery and increase their process speed by up to 15% at the same time. ProWin combines the long-term process experience and in-depth knowledge ANDRITZ has on needlepunch lines with innovative software to synchronize action across the line. Guillaume Julien, Head of Needlepunch Sales at ANDRITZ Nonwoven, explains,

“We have developed a self-regulating, advanced technology to reduce fiber deposits at the edges of the web and eliminate the “smile” effect across its width. ProWin enables producers to optimize the CV ratio autonomously and precisely while also generating significant fiber savings of up to 10% and increasing production speed. Thus, it also provides a faster ROI.“

When it comes to the spunlace process, a better product quality can be obtained by ensuring that the different equipment units in the production line are consistent with one another. The TT card, the Jetlace hydroentanglement unit, and the neXdry through-air dryer are the perfect combination to obtain premium visual quality and characteristics in the web. For an equivalent amount of fibers, this set-up is designed to produce an even web with significant bulkiness and an excellent MD:CD ratio without impacting the production capacity.

Maximizing performance by minimizing the raw material input and the amount of waste produced is a real driver of cost optimization. This is why ANDRITZ has created and integrated a solution that allows nonwovens producers to retrieve the wasted edges of their spunlace fabric and re-use it as recycled fibers. As a result, roll-good producers can even obtain the same web characteristics as when using virgin fibers, and most importantly, the exact same quality.

ANDRITZ also offers – under the brand Metris – ANDRITZ digital solutions – a variety of several service apps for optimum customer benefit. The Metris Cost Management app is used to track raw material consumption. It is an advanced system aimed at monitoring fiber consumption and allowing in-depth diagnoses to investigate raw material losses and savings grouped by different process areas. Thanks to this Metris application, ANDRITZ customers are able to optimize their system’s consumption of raw materials.

All these innovations are available in ANDRITZ’s technical centers, where ANDRITZ process experts will be glad to welcome customers in order to discuss and define their product expectations.

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

• INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
• Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
• Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
• Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
• Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

The strategic acquisition is a significant step in expanding Oerlikon’s current manmade fibers business into the larger polymer processing market. The acquisition accelerates and enhances existing organic initiatives to diversify and strengthen the company’s core high-precision polymer flow control capabilities, products and services. The completion of the transaction is subject to customary regulatory approvals and is expected by the second quarter of 2021.

To reflect Oerlikon’s expansion into a larger high-growth market, the Manmade Fibers Division will be renamed as Polymer Processing Solutions Division. This division will have two business units: Flow Control Solutions and Manmade Fibers Solutions. The busines unit Flow Control Solutions will combine the expertise of Oerlikon Barmag’s existing gear metering pumps business line and INglass’ HRSflow operations. The business unit Manmade Fibers Solutions will continue to focus on growing the existing chemical fiber machinery and plant engineering business, offering plant solutions for the production of polyester, polypropylene and polyamide.

“Our new Polymer Processing Solutions Division and the acquisition of INglass S.p.A. and its HRSflow business are critical components of Oerlikon Group’s growth strategy. We are accelerating our efforts to drive sustainable organic and inorganic growth in all of our businesses. The acquisition enables new synergy opportunities between both Oerlikon divisions in specific end markets such as automotive. With INglass and its HRSflow operations, we acquire leading suppliers in their markets with proven success of their technologies and services,” said Dr. Roland Fischer, CEO Oerlikon Group.

“We firmly believe that within the Oerlikon Group we can further exploit the potential of our hot runner systems technology and, when combined with the capabilities of Oerlikon Barmag gear metering pumps and their melt distribution engineering competence, will position our business as one of the leading precision flow control specialists for multiple applications in a global growth market”, said Antonio Bortuzzo, CEO of INglass S.p.A.

New business unit offers great growth potential

The Oerlikon Barmag competence brand already offers high precision flow control related components, including a large selection of gear metering pumps for textile and non-textile markets. These highly efficient pumps are used in silicone casting, dynamic mixing and oil spraying for the chemical, paint, polymer processing and automotive industries. This double-digit million CHF business, which has grown in recent years, will be merged with INglass’ HRSflow hot runner technologies under the new business unit Flow Control Solutions. HRSflow’s excellent market access to many OEMs in and outside the automotive industry brings significant growth opportunities.

INglass is a leader in automotive and expanding in other sectors

INglass S.p.A. is an internationally operating successful company established in 1987. Its product portfolio includes hot runners as well as engineering and consultancy services for the advanced development of polymer processing products. INglass’ HRSflow hot runner systems are applied in multiple industries from automotive, consumer goods and household appliances to packaging, waste management, construction and transportation.

INglass is headquartered in San Polo di Piave, Italy, near Venice. 2020 revenues of INglass were approximately CHF 135 million and the acquisition is expected to be immediately accretive to Oerlikon’s margins and cash flows. INglass has more than 1 000 employees and 55 sites worldwide, including production plants in Italy, China and the US. Among these sites are INglass’ newly renovated headquarters and production at its primary location in San Polo di Piave near Venice, Italy. The investment modernized the facilities with automated production, underlining the company’s commitment to sustainability and the environment. The other two modern production sites are in Zhejiang (Hangzhou Province) in China and Michigan (Grand Rapids) in the USA.

Following the integration with Oerlikon Barmag’s gear metering pumps business of about 200 employees in Remscheid, Germany, the new Flow Control Solutions business unit will have round about 1 200 employees.

"We see great potential for growth in our new Flow Control Solutions business unit,” said Georg Stausberg, Polymer Processing Solutions Division CEO and Member of the Executive Committee of the Oerlikon Group. “The businesses form the two core growth pillars and benefit from each other in global market development, in modern and digitized production, and in customer services. We also see potential synergies in R&D by combining existing know-how in the field of polymer processing. New technological solutions between hot runner systems and gear metering pumps are conceivable. We also anticipate collaborating more closely with the Oerlikon Surface Solutions Division, particularly in future mobility applications and functional polymer component solutions for the automotive industry. All in all, we will offer our customers innovative and attractive solutions in the field of polymer processing and high precision flow control components.”

Next steps for further diversification of the division product portfolio are already ongoing

Combining the divisions plant engineering and process know how with expertise on high precision flow control components technologies has a significant impact on product quality in nearly all applications, which opens up a platform for further organic and inorganic growth. "We are closely observing the megatrends in the markets and developing new business models to match. In the area of sustainability, covering topics such as circular economy, the recycling of materials using mechanical and chemical recycling solutions, as well as the handling of new, more environmentally friendly and biodegradable materials, we are on the verge of a breakthrough. We are ready to actively participate in these growth areas,” added Georg Stausberg.

“In realigning the Polymer Processing Solutions Division, Oerlikon will continue to apply our successful recipe of a lean organizational structure to efficiently manage the business. This means clear processes, short decision-making paths and competent teams in a diverse and multicultural organization in which everyone can contribute innovatively to create customer value,” said Georg Stausberg.

• Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
• Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
• New level of transparency in the textile industry: introduction of blockchain technology
• Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes. The non-financial report, prepared in accordance with the reporting standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and reviewed by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft, illustrates how the company is responding to the global challenges of our time.

The 2020 financial year of the Lenzing Group was largely dominated by the COVID-19 pandemic. Lenzing took short-term measures to safeguard its business operations and mitigate the effects of fiber prices and fiber demand which came under increasing pressure. The priority was to protect employees and strengthen long-term partnerships with suppliers and customers. Following the current fight against the coronavirus and its consequences, the company continues to move ahead determinedly to achieve its sustainability targets, also against the backdrop of such a difficult market environment.

With the implementation of its science-based targets, the Lenzing Group actively contributes to mastering the problems caused by climate change. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions by 50 percent per ton of product by 2030. The overriding target is to be climate-neutral by 2050.*

The launch of the first carbon-zero TENCEL™ fibers certified as CarbonNeutral® products in accordance with The CarbonNeutral Protocol – the leading global framework for carbon neutrality – represents another important milestone from the reporting year. As of June 2021, Lenzing will also market the first VEOCEL™ branded lyocell fibers as certified CarbonNeutral® products.

Promoting the circular economy
Lenzing also sets standards for the entire fiber, textile and clothing industry with respect to the circular economy which is of such crucial importance in climate and resource protection. In order to enhance resource efficiency and offer a solution for the global problem of textile waste, the company developed the REFIBRA™ recycling technology. REFIBRA™ is the only technology in the world enabling the production of new lyocell fibers on a commercial scale from cotton scraps derived from manufacturing cotton clothing as well as from used garments. In this way, an important contribution is made to promoting circularity in the textile industry.*

New level of transparency in the textile industry
In addition to environmental protection, the issue of transparency along the supply chain poses a major challenge to the textile industry. Working in cooperation with TextileGenesis™, Lenzing offers an innovative solution to ensure greater transparency on the basis of blockchain technology. Following several successful pilot projects with renowned fashion brands, this digital platform was ultimately launched in 2020 to enable the traceability of textiles, from the fiber to all stages of production and distribution. Thanks to the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and its partners are able to issue so-called “blockchain assets” in direct proportion to the physical fiber deliveries of the brands TENCEL™ and LENZING™ ECOVERO™. These digital assets function like a “fingerprint” and thus prevent adulteration.*

Target setting: Lenzing raises the bar even higher
The Lenzing Group operates in line with three strategic principles within the context of its “Naturally positive” sustainability strategy: partnering for change, advancing circularity and greening the value chain.*

*See attached document for more information..