From the Sector

“Authenticity wins: climbing business in a sustainable way” – the discussion targeted the importance of communication and transparency for today’s industry, promoting responsibility and innovation.

A selection of 26 fashion industry top players to discuss how digitalization is impacting companies’ value, one of the most important parameter to be considered when talking about business. This was the fifth edition of the CEO Roundtable, promoted by Fashion and eBusiness, which took place on November 7th at Palazzo Parigi, Milan.

The denim ingredient brand ISKO, always first in line when it comes to supporting the industry in the development of best practices, was among the event’s main partners. The company shared its long-standing and well-established commitment to Responsible Innovation™, taking part in a panel tackling new models to blend together authenticity and innovation and thus responsibly succeed in business.

Fashion Magazine CEO&Editor-in-chief Marc Sondermann hosted the discussion, which started at 9.20 a.m. and involved Elena Faleschini, ISKO Global Field Marketing Manager, along with Nicolas Bargi, Save the Duck Founder&CEO, Francesca Toninato, 7 For All Mankind CEO and Stefano Modellini, Diana E-commerce Corporation Founder&CEO.

Lenzing was awarded for the introduction of the blockchain technology for fiber identification as well as its achievements as a leading company and significant economic engine in the region

On November 4, 2019, Lenzing AG won the “Digital Corona” in Gold. The coveted business prize was awarded for the first time in this category. It is awarded to companies that have dynamically advanced the digitization of business processes, products, services and business models in recent years. At the premiere, Lenzing was delighted to receive the first prize for the introduction of the blockchain technology for fiber identification along the textile value chain.

“Consumers increasingly want to understand the ingredients and suppliers of the products they buy, requesting a new level of transparency and traceability. With the introduction of blockchain technology, Lenzing is pursuing the ambitious goal of creating full transparency across the value chain, driving change in an industry where less than five percent of the top 250 apparel brands can track their garments back to the fiber origin”, Stefan Doboczky, CEO of the Lenzing Group, says. Lenzing enables its customers and partners to identify TENCEL ™ branded fibers across each production and distribution step from fiber-to-retail. The technology also allows consumers to verify the garment composition and the underlying textile supply chain at the point of sale, simply by scanning the barcode with a mobile device. As a result, Lenzing also directly supports the business with its very sustainably produced TENCEL™ lyocell fibers.

The Board of Directors of Autoneum Holding Ltd appoints Bernhard Wiehl, the longstanding Head of Finance & Controlling of Business Group Europe, as Chief Financial Officer (CFO) and member of the Group Executive Board with immediate effect. The previous CFO Dr Martin Zwyssig has decided to leave Autoneum.

Bernhard Wiehl has been responsible for Finance & Controlling at Business Group Europe since 2013. Also thanks to his financial leadership, this Business Group with its numerous legal units has become highly profitable in recent years. Prior to joining Autoneum, he held senior finance and controlling positions with various automotive suppliers and has therefore extensive experience in the financial management of internationally active suppliers. Additionally, he is very familiar with the challenges of the automotive industry in a global environment. From 2007 to 2013, he was Head of Finance & Controlling and member of the Executive Board of the Lighting and Electronics division at the German automotive supplier Hella and from 2004 to 2007, among other things, in charge of controlling of the Europedivision of the supplier Hydraulik-Ring. Wiehl started his professional career in 1995 at TRW Automotive in Germany. He studied mechanical and industrial engineering at the Esslingen University of Applied Sciences, Germany, and holds a degree in industrial engineering (FH).

Bernhard Wiehl’s predecessor Dr Martin Zwyssig decided to leave the Company and to take up a new professional challenge. The Board of Directors and CEO Matthias Holzammer thank him for the commitment to the Company and wish him all the best for his professional and private future.

The Board of Directors of Autoneum Holding Ltd has appointed Matthias Holzammer, the former, long-term Head of Business Group Europe, as CEO with immediate effect. He is taking over from Martin Hirzel, who will be leaving the Company in agreement with the Board of Directors. Since the existing problems in North America are proving more challenging than expected, the Group's operating result in the second semester of 2019 will not improve, contrary to previous forecasts.

Matthias Holzammer has already demonstrated his operational expertise as the Company’s Head of Business Group Europe, which he successfully restructured from 2012 on and transformed into a highly profitable Business Group. Due to the severe operational and commercial issues in North America, the turnaround and improvement of results will take more time than expected. Matthias Holzammer will devote himself to this task with the highest priority, in order to return the Business Group and the Group back to profitability as quickly as possible. "In view of the current challenges in North America and the volatile global market environment, Matthias Holzammer is the ideal choice to lead the Company as CEO with his industry experience, knowledge of Autoneum and track record in restructuring”, said Hans-Peter Schwald, Chairman of the Board of Directors of Autoneum Holding Ltd.

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

The multi-rotor Tiger Drones typically carry spraying equipment and can also carry high definition cameras that provide a wide range of field information. Farmers can measure land profiles, identify any problem plants or areas and manage their cultivation in the most efficient way. The 420 mm square shaped fuselage cover protects the drone’s electronic controls and forms an aerodynamic fairing between the central fuselage and the craft’s 4 rotor arms.
 
The COBRA Design and Development team selected a composite laminate of glass fibre reinforcements for the cover – which don’t interfere with GPS signals used by the drone - and combined these with epoxy laminating resins in a hand laminated, vacuum bag consolidated production process.

COBRA also designed all of the mould tools for the project. The 2-piece aluminium mould was produced by one of COBRA’s long-term tooling partners. This metallic tooling provides an excellent surface finish to the part with absolutely minimal trimming and finishing required.   Moulded parts can go swiftly through a painting and clear coating process before final inspection and delivery to the client.

Danu Chotikapanich, CEO of COBRA International comments: “Our collaboration with HG Robotics is going well, and we are hoping to collaborate further with them on other multi-rotor and fixed wing VTOL (vertical take-off and landing) drone models in the future. These are COBRA’s first parts for the agricultural industry, and they provide an exciting vision as to just a few of the possibilities for lightweight composites in this area and also in the wider commercial UAV market as a whole.”

With the announcement of the eligible vehicle models, the World Car Awards 2020 kickedoff today at the IAA Motor Show in Frankfurt, Germany. This year again, the majority of contenders is equipped with lightweight components for acoustic and thermal management from Autoneum. The world’s leading automobile industry awards will be presented at the New York Motor Show in the spring of 2020.

A total of 46 new vehicle models have passed the initial screening and are now contenders for trophies in the categories “World Car of the Year”, “World Luxury Car”, “World Performance Car”, “World Urban Car” and “World Car Design of the Year”, including five new fully-electric models alone. Whether it’s a lightweight underbody, a noise-absorbing carpet system or a heat-reducing engine encapsulation – most of the eligible vehicles benefit from Autoneum’s innovation leadership in thermal and acoustic management. Autoneum’s expertise extends to new forms of mobility such as electric vehicles: Also thanks to numerous Autoneum components, Jaguar’s fully-electric SUV “I-PACE” impressed the jurors for the World Car Awards 2019, which was the first model ever to be named “World Car of the Year”, “World Car Design of the Year” and “World Green Car” at the same time.

On the occasion of today’s eligibility announcement, Autoneum CEO Martin Hirzel said: “Once again, the contenders are testimony to our innovation leadership. The World Car Awards also confirm our forward-looking approach: Nominated e-models feature Autoneum components as well. Welcoming our industry’s transformation early on, we today supply environmentally sustainable, lightweight components for most electric models available worldwide.”

Gerry Malloy, President of the World Car Awards Association, added: “As a market leader, Autoneum is the ideal partner for us. Our shared commitment to innovation was a decisive factor in forming a partnership back in 2014. Nowadays, this is a crucial aspect for manufacturers and suppliers who wish to remain successful in times of industrial and technological change.”

The World Car Awards, which have been presented annually since 2004, are the world’s leading nd most widely recognized automotive industry awards. A jury comprising of more than 80 international automotive journalists selects winners in five categories. The winners of the 2020 World Car Awards will be announced in April next year at the New York Motor Show.

• Circularity at the centre

PG DENIM, the designer project by Paolo Gnutti, is ready for several important events scheduled for the autumn with ground-breaking interpretations and a new – increasingly green – business model. The occasion is its participation in the Blue Zone at Munich Fabric Start (Munich, 3-5 September 2019), a space which is increasingly often reserved for companies and projects with a high innovation rate in the world of denim.

PG DENIM at the German exhibition will be presenting important product innovations, but most notably new concepts developed for the S/S 2021 season. The focus here is on circularity, seen from a dual perspective: the product with the no longer traditional alternation of seasons, and a sustainabilityoriented approach.

Seasons meet

The new PG DENIM approach is geared towards overlapping seasonality, with less and less marked separations between projects dedicated to the spring-summer and fall-winter lines. The collections by PG DENIM can thus be increasingly defined as a “mix of products without seasonality”. Its focal points are innovation alongside the concept behind the initial idea, as opposed to just the season. This trend, explains Paolo Gnutti, CEO and R&D Head at PG DENIM, is also due to registering the fact that seasonality – in terms of environment and trends – is changing at an increasingly rapid pace. As a response to this situation, the choice has been made to design new collections starting from macro-trends and presenting fabrics for garments which are “easy to wear”, suitable for both warm and cold temperatures, in a true melting pot  of weights and sizes.

The lines for the previous season are thus reintroduced and restyled playing with weights and sizes, within a range where flock meets ultra-light fabric bases, or where vinyl is combined with typically summer weights which shift the fabric towards the world of “paper” with crispy touches, resulting in extraordinarily lightweight and strong items at the same time. Also the GARAGE DENIM has been upgraded with fluid and smoothed touched for garments which are easy to wear and have a strong personality.

Partnership with The Denim Window

The PG DENIM season is also enhanced by its partnership in The Denim Window project, which has resulted in a limited series of Creative Capsule Collections, derived from the idea of bringing together companies which had already worked or were working together, trying to highlight – through small capsule collections – the best of what had already been produced by traditional businesses. This has resulted  in three trailblazing capsules, two of which designed in partnership by PG DENIM and companies the likes of M&J Group, Cadica and Greenwear. Several copies of these collections have been made to travel the world, and – after the official presentation in July – they will have a special corner, The Denim Window, in the Bluezone at Munich Fabric Start.

The “Circular Programme” and the five “Rs” of sustainability

Also the PG DENIM approach to accountability in production processes has been enhanced by implementing the “Circular Programme”. As part of our corporate vision, Italian-style production is combined with compliance with what have become known as “the five Rs”, that is to say key concepts underlying the design and manufacturing model: Reduce (everything you are not using), Repair (everything you can), Reuse (anything available to you), Recycle (all that is left), Respect (everything around you).

This is the philosophy underlying each individual process at PG DENIM, and leading to new specific programmes which have been its business focus over the past few months:

1) Reducing the environmental impact during the fabric dyeing phase in reaction and sulphurbased processes, where the use of chemicals has been reduced by 40%, water consumption by 50% and CO2 emissions by 60%, which has also resulted in better penetration and a better result in the crocking process. This has led to producing 10 new articles which will be launched on the market.

2) Recycling all waste from processing and after use, creating a range of garments where cotton is actually obtained from regenerating these two kinds of waste. In this regard, PG DENIM for now is the only company on the market able to process with a percentage of recycled product exceeding 60% of the total, whereas the average for this kind of manufacturing is generally about 35%.

As regards regular production, on the other hand, PG DENIM follows stringent international standards, including Dtox, Reach and Gots in all its processing phases, also using BCI cottons and the Organic Cotton Standard for raw materials. Last but not least, it was recently awarded the GRS (Global Recycled Standard) certification.

For the first time, Italian textile company Manteco showcases its ultimate innovations at Première Vision’s Smart Creation, the fair’s most cutting edge epicentre showcasing visionary innovators pushing for a sustainable change and making the difference in the fashion business. The Prato-based company is leader in the production New Generation Recycled Wool thanks to a specially designed KM0, traceable and circular economy model.

Behind the sustainable approach and the premium quality textiles there are generations of ‘saper fare’ - know-how, in Italian -, indeed, Manteco’s products are not only responsibly Made in Italy but imbued with the skills of the artisans and makers working within 10 kms around the company. “Made in Italy does not mean processing high-quality materials with international technologies and then label the final product for export. It means products grown, taken care of and handcrafted in the country.” Says Matteo Mantellassi, CEO of Manteco. “But there’s a further step to this: harnessing the local ‘genius loci’, meaning the skills, traditions and human potential of a territory. We are proud to say that since 1943 we have always been 100% Made in Italy.”

JEC Asia is the major, most insightful composites event in Asia-Pacific for products, solutions, net-working, and advanced industry thinking - 3 full days of Business, Innovation & Knowledge

JEC ASIA KEY FIGURES

• 7,000+ professional visits
• 245+ exhibiting companies from 49 countries
• 3 conference sessions
• 40+ International speakers
• 450+ business meetings
• Startup Booster competition
• Innovation awards and planet
• In parallel to eMove360° Asia

Paris - For its 12th edition and third time in Seoul, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific to present their latest capabilities and innovations to the composites community and the strategic end-user’s market including: Mobility, Aeronautics, Building & Construction. This year more than 245 exhibiting companies are expected with thousands of professionals from 49
countries to network, exchange ideas, explore new opportunities and strengthen their business partnerships.

Addressing the impact of composites in Mobility 4.0

During the press conference held in Seoul on July 9th to introduce JEC Asia 2019 and eMove Asia 360° main features, a roundtable gathering speakers, experts and academics from prestigious Korean research centers specialized in carbon and composites — along with Hyundai Motor and KCTech composites experts, eMove360°’s CEO & Publisher and Korean Electric Vehicle Association representatives — exchanged their views on the impact of composites in today's and tomorrow's mobility in the world with a focus on the Korean market. Discussions centered around the challenges raised by Mobility 4.0 (electric connected and autonomous vehicles) and how composites can offer highly adapted solutions for the new challenges faced by this sector, particularly in the context of the rising electrification of vehicles.

Hence, the 2019 edition of JEC Asia will welcome for the first time the eMove360° ASIA exhibition and conferences focusing on Trends in electric & autonomous mobility, Battery & Powertrain and Charging & Energy.

Celebrating Innovation and Knowledge

JEC Asia 2019 will also host the 2nd leg of the JEC Startup Booster competition, the leading startup competition in the world of composites will enable companies to find and assess innovations with a potential impact on their respective industry. The 10 finalists selected in the region by a prestigious jury, will pitch their project to win a chance to showcase their work at JEC World 2020 in Paris. The JEC Innovation Awards is a long-established and worldwide program with 3 simple goals: identify, promote and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations. The award ceremony will take place on the second day of JEC Asia, on November 14th, 2019.

JEC Asia 2019 will also feature a fulfilling conference program with experts from the industry giving their insights on the latest developments in high-performance composite technologies and applications.

JEC Asia 2019 conferences main themes will focus on:

• International Carbon Festival Conference organized with our partner, KCTech.
• Automotive composite golden triangle: low CAPEX, low cost but high volume
• Automotive hybrid solutions: take the best of each material
• Aeronautics: faster processes and new materials
• Business opportunities (Raw materials, Process, Application, Countries, Region)
Finally, JEC Asia offers the opportunity to visit Composites sites. This year professionals will live a full experience of South Korea composites Industry visiting: Hanyang University, Kookmin University with Hankuk Carbon, Win & Win Co or Korean Carbon with KCTech in Jeonju.

See you @JEC Asia 2019 and eMove360° Asia, November 13 to 15,  Seoul Coex Convention and Exhibition Center

• Lenzing sets net-zero CO2 emissions target by 2050
• Reduction of specific CO2 emissions by 50 percent until 2030
• Investment of more than EUR 100 mn to combat 1.3 Mt of CO2 emissions
• Commitment to follow the Science Based Targets concept

Lenzing, member of the CEO Climate Leaders Group of the World Economic Forum and a signatory to the United Nations Fashion Industry Charter for Climate Action, will drastically reduce its CO2 footprint. The Lenzing Group will invest EUR 100 mn over the coming years to reduce carbon emissions both inside its operational boundaries (scope 1+2) and in its supply chain (scope 3). Due to its ambitious CO2 emission reduction strategy, the Lenzing Group will further contribute towards helping customers to transition their business to a lower CO2 base.

A first milestone is set for 2030, when Lenzing plans to reduce CO2 emissions per ton of product by almost 50 percent (scope 1+2 and 3) compared to a 2017 baseline. The total CO2 reduction of all the planned initiatives will yield 1.3 Mt.