From the Sector

Reset
412 results
Graphic: Global Fashion Agenda
17.03.2022

Global Fashion Agenda and UN Climate Change Secretariat join forces

Global Fashion Agenda (GFA), the non-profit organisation that fosters collaboration on sustainability in fashion to drive impact, has forged a new alliance with UN Climate Change secretariat (UNFCCC) to accelerate the fashion industry’s climate action.
 
The Fashion On Climate report projects that if the fashion industry does not accelerate its response to climate change, by 2030 it will produce around twice the volume of greenhouse gas emissions required to align with the Paris Agreement global warming pathways by 2050. With the urgent need for industry transformation, the new alliance between GFA and UNFCCC will accelerate the impact of the UN Fashion Industry Charter for Climate Action which aims to drive the fashion industry to net-zero emissions no later than 2050 in line with keeping global warming below 1.5 degrees.
 

Global Fashion Agenda (GFA), the non-profit organisation that fosters collaboration on sustainability in fashion to drive impact, has forged a new alliance with UN Climate Change secretariat (UNFCCC) to accelerate the fashion industry’s climate action.
 
The Fashion On Climate report projects that if the fashion industry does not accelerate its response to climate change, by 2030 it will produce around twice the volume of greenhouse gas emissions required to align with the Paris Agreement global warming pathways by 2050. With the urgent need for industry transformation, the new alliance between GFA and UNFCCC will accelerate the impact of the UN Fashion Industry Charter for Climate Action which aims to drive the fashion industry to net-zero emissions no later than 2050 in line with keeping global warming below 1.5 degrees.
 
The collaboration will be activated around the organisations’ prestigious forums including GFA’s Global Fashion Summit and UNFCCC’s annual Conference of Parties (COP). Through these forums, the organisations will collaborate to unite fashion leaders and core stakeholders to facilitate knowledge sharing, impactful partnerships, and the implementation of bold actions needed to meet the Fashion Charter targets.
 
Global Fashion Summit: Copenhagen Edition 2022, the leading international forum for sustainability in fashion, will take place on 7-8 June in the grand setting of the Royal Opera House, Copenhagen, Denmark. Under the theme ‘Alliances For a New Era’ - the Summit will endeavour to form previously inconceivable alliances within the fashion industry and also examine atypical cross-industry alliances, in a bid to accelerate the transition to a net positive reality.
 
UNFCCC will, through the Fashion Charter, contribute to the Summit content, where they will share insights on its progress and what further solutions are needed. UNFCCC will also hold its annual Fashion Charter meeting at the Summit, where the organisations will convene relevant experts to join resources and discuss tools that can enable the sector to achieve its climate targets laid out in the charter. The alliance will also continue for future editions Global Fashion Summit in other locations, in addition to Copenhagen.
 
Beyond the Summit, GFA and UNFCCC will continue to work together to elevate publications and reports, such as the Fashion CEO Agenda, and inform Fashion Charter meetings during COP27 to raise awareness among leaders on the most pressing issues and priorities and urging commitments from industry leaders to drive change within social, environmental and circular dimensions.
 
Federica Marchionni, CEO, Global Fashion Agenda, says: “GFA is striving to create impactful alliances that can accelerate the fashion industry’s transition to a net zero reality. We are therefore thrilled to be collaborating with UNFCCC as its Fashion Charter is an essential tool to mobilise the necessary industry transformation. Through our collaboration, we hope to bring together core fashion stakeholders, foster pre-competitive collaboration and provide even deeper insights and guidance to advance progress.”
 
Niclas Svenningsen, Climate Action manager, UNFCCC, says, “We are excited for this opportunity to reinforce our collaboration with the Global Fashion Agenda. The climate crisis is today the paramount issue for the fashion sector to address. While the Fashion Charter brings together a wide range of stakeholders to work collaboratively on solutions, the Global Fashion Agenda is an important venue for broader sustainability discussions in the fashion sector. We see many opportunities for further strengthening and highlighting both the sustainability and the climate work through this collaboration.”

C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE
Duarte outfits for FW 22/23 collection - Cream Teddy Coat
14.03.2022

C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa

  • DUARTE  brings on the runway its SEASON 2 “Eco-Street Dance” collection

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers.  The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub at ModaLisboa after a first presentation at Milan Fashion Week. From February 24th until 27th, Duarte’s creations have been featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

  • DUARTE  brings on the runway its SEASON 2 “Eco-Street Dance” collection

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers.  The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub at ModaLisboa after a first presentation at Milan Fashion Week. From February 24th until 27th, Duarte’s creations have been featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption). 

This time the inspiration is also Street Dance drawn directly from the city streets, with majorly unisex pieces (apart from some small specific details linked to sizes or ergonomics) and materials that both respect the planet and keep you warm. The prints drawn from ripped posters giving birth to a sort of new style that we can name “Eco-Street Dance”. The color palette explores the dark shades of grey, cream, blue and black, with artistic pops of color of a hopeful urban culture that tears apart posters from the past and turns them into a new brighter story. 

Talking about materials, the collection presents a selection of urban pieces for everyday superheroes, fighting against environmental issues - with a holistic approach to sustainability values thanks to the synergy with C.L.A.S.S. and its Back in the Loop area: a section dedicated to alternative and sustainable sourcing against the massive amount of materials and textiles produced that are not used and discarded by the fashion system. This is mostly powered by MAEBA International - and its ReLiveTex® fabrics - leader in selecting and repurposing premium Italian fabrics with exceptional 60 years of expertise in collecting high quality materials from leading brands and textile manufacturers, and the first company at an international level to be accredited for the UNI EN ISO 14021 certification which grants the traceability of the collected materials.

The linings complete the full sustainable picture, thanks to Bemberg™ by Asahi Kasei fabrics by Gianni Crespi Foderami. Bemberg™ is a new generation material made from the smart-tech transformation of cotton linter pre-consumer material, converted through a traceable and transparent closed loop process. Entirely made in Japan, it comes with Compostability and Ecotoxicity Certifications verified by Innovhub SSI, RCS, OEKOTEX® Standard 100 and the Eco Mark certifications. The factory is ISO 14001 certified, too. 

(c) FET
FET-100 Series Melt Spinning System
13.03.2022

FET gearing up for Techtextil 2022

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

A major theme to be highlighted on the FET stand is Sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials.

FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles (c) Intertextile Shanghai Home Textiles
Intertextile Shanghai Home Textiles
09.03.2022

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

As an upswing from the growing public awareness of environmental issues, consumers are now more willing to switch to sustainable products. According to a CottonWorks’ survey, 90% of the interviewed Chinese consumers want their home textiles to be environmentally friendly[1]. It also found that more consumers are paying attention to the fibre content that can deliver safe and sustainable home textiles.
Furthermore, the Chinese government’s ‘Outline Of the Development of the Textile Industry during the 14th Five Year Plan’, also encourages the acceleration of low cost, functional and sustainable renewable fibres in the local textile industry.

The Lenzing satellite pavilion: a one-stop platform for green home textile materials
To help home textile suppliers source a variety of eco-friendly materials efficiently, one of the fair’s long-time exhibitors is set to form a new pavilion at the upcoming Spring show. Lenzing, the Austrian brand widely known for its ecologically responsible production of specialty fibres made from renewable raw material wood, gathers seven of its local downstream supply chain manufacturers to showcase their renewable products.

Mr David Dai, Senior Commercial Director Textile China of Lenzing spoked about why they decided to organise a new pavilion at the show: “As we received positive feedback from our pavilion at Intertextile Shanghai Apparel Fabrics, our business partners from the home textile supply chain were hoping for a similar arrangement in this sector. We believe all the participating manufacturers can benefit from this pavilion by finding ways to better serve their clients and consumers.”

Brands in the Lenzing satellite pavilion will include:
•    Lenzing Group will introduce the first Carbon-zero TENCEL™ fibres which are CarbonNeutral™ certified products by Natural Capital Partner.
•    Botou Jinglun Textiles Co Ltd focuses on new fibre yarns. The company develops multi-component yarns for cotton, wool, silk and linen with combinations of MODAL, TENCEL™ fibres and various functional materials.
•    Fujian Yongtai County Huaerjin Textile Co Ltd provides high-quality, natural, renewable pure and blended yarns including TENCEL™ fibres, US cotton, Australian cotton, acrylic cotton, silk and other plant-based yarns.
•    Jiangsu Dasheng Group Co Ltd has one of the largest cellulosic fibre yarn spinning mills in China and focuses on producing top-quality home textiles.
•    Qingdao Textiles Group produces natural fibres, cellulose fibres, copper antimicrobial fibres and other nature-based materials for home and contract textiles.
•    Suzhou Zhenlun Spinning Co Ltd is an advanced enterprise specialising in regenerated cellulose yarns like ECO VERO, FSC Viscose, Circulose, Carbon Zero Yarn and more.
•    Ton Design Industrial Co Ltd produces medium and high-end bedding fabrics. The brand’s TENCEL™ Lyocell fibres and TENCEL™ fibres blend cotton series products are certified by Lenzing.
•    Wuxi Tianmu Extra Width Printing Dyeing Co Ltd mainly produces extra-wide, high-count and high-density down-proof fabrics and fabrics for bedding. The technique can handle different procedures for dealing with pure cotton, bamboo fibres, TENCEL™ fibres and other fibre fabrics.

In addition to the new pavilion, a number of other featured exhibitors will also showcase their sustainable products at the fair. This includes Cotton Council International (CCI) promoting US cotton fibres and cotton products, and Zhangjiagang Coolist Life Technology Co Ltd bringing their unique bedding products made from organic and environmental-friendly materials.

RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections (c) Checkpoint Systems GmbH
Checkpoint Systems PTS Sustainable Label
08.03.2022

New RF- Security Labels von Checkpoint Systems

  • Sustainability and security combined:
  • RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections

To ensure that its retail customers are not negatively affecting the recyclability of product packaging by attaching security labels,Checkpoint Systems partnered with PTS – an organisation with over 70 years’experience researching the use of fibre-based solutions – to conduct a series oftechnical tests on its range of labels. The technical report concluded that consumers can safely dispose of a Checkpoint security label in a household recycling bin, without having to separate the label from the packaging, knowing that the entire pack will be recycled.

  • Sustainability and security combined:
  • RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections

To ensure that its retail customers are not negatively affecting the recyclability of product packaging by attaching security labels,Checkpoint Systems partnered with PTS – an organisation with over 70 years’experience researching the use of fibre-based solutions – to conduct a series oftechnical tests on its range of labels. The technical report concluded that consumers can safely dispose of a Checkpoint security label in a household recycling bin, without having to separate the label from the packaging, knowing that the entire pack will be recycled.

The Germany-based research consultancy PTS tested a range of Checkpoint labels. PTS analysed the labels, which were different sizes and materials, to ensure that following the standard kerbside recycling process, the recycled, fibre-based material would be of acceptable quality. Each label was applied to a piece of cartonboard to simulate a real-world scenario and the results show that all are classified as being recyclable in accordance with current regulations. All labels – including the 410 RF, 2928 RF and 4210 RF labels – achieved an excellent overall recyclability rate of over 94%.

Sustainability is essential

With brands making strong commitments to sustainability – including investing in more environmentally friendly forms of packaging like cartonboard – and consumers increasingly demonstrating their preferences for sustainable packaging it is pivotal that anything applied to an item – at any point along the supply chain or in-store – does not affect the recyclability of its packaging.

Security labels play a vital role in ensuring products remain available to purchase. Retailers have been using a diverse range of labels to protect their merchandise, working with suppliers to ‘tag’ items at source or relying on store associates to apply labels in-store. As one of the largest suppliers of RF-based Electronic Article Surveillance (EAS) labels globally, Checkpoint’s labels are applied to millions of products, which are packaged in different materials. Typically, when recycled, packaging labels tend to end up in a combination of different rubbish and recycling streams, depending on the packaging material and the consumer commitment to recycling.

Until today, the recyclability of these labels has been relatively unknown. It means that retailers and consumers could inadvertently be contaminating the paper-based packaging recycling stream with millions of security labels – still attached to packaging which could have otherwise been recycled up to 25 times.

“Security labels play an important role in helping retailers protect their profits, but it is vital they don’t stop packaging from being recycled. We are delighted to have achieved this accreditation from PTS that shows our labels can be recycled through the existing kerbside collections. It means that brands and retailers can be assured they are not negatively affecting a country’s recycling rate, while also knowing their customers can conveniently dispose of the entire pack, packaging material and label, in the same household recycling bin. Our labels passed all of PTS’ stringent tests meaning they have little to no impact on the recyclability of a piece of cartonboard packaging." 

(c) BB Engineering GmbH
25.02.2022

BB Engineering GmbH delivers melt filter for PET recycling system to Indorama Polyester Industries

BB Engineering GmbH (Germany) delivers a melt filter for recycling PET flakes to polyester manufacturer Indorama Polyester Industries (Thailand). Indorama will be using the type NSF38 filter in its recently assembled recycling system in order to produce rPET granulate from flake PET bottle waste. The NSF38 filter enables continual filtering – in other words, the system switches from one filter to the other during the process without the need for conversion shut-downs. The filter allows the processing of consumer waste for example, in the form of shredded PET bottles into new, high-quality rPET granulate. This granulate is subsequently processed into manmade fibers in spinning systems.

The NSF38 is a switchable filter with a filter surface area of ap-prox. 16 m2 on each side, with throughputs of between 1,000 and 1,900 kg/h. The filter inserts each contain 19 pleated filter candles (60 x 1,000mm Ø). The filter medium comprises a sin-tered metal fiber nonwoven with a filtration fineness of 25 μm. This ensures that the melt remains free of contaminants and gel particles, which in turn enables the production of high-quality end products.

BB Engineering GmbH (Germany) delivers a melt filter for recycling PET flakes to polyester manufacturer Indorama Polyester Industries (Thailand). Indorama will be using the type NSF38 filter in its recently assembled recycling system in order to produce rPET granulate from flake PET bottle waste. The NSF38 filter enables continual filtering – in other words, the system switches from one filter to the other during the process without the need for conversion shut-downs. The filter allows the processing of consumer waste for example, in the form of shredded PET bottles into new, high-quality rPET granulate. This granulate is subsequently processed into manmade fibers in spinning systems.

The NSF38 is a switchable filter with a filter surface area of ap-prox. 16 m2 on each side, with throughputs of between 1,000 and 1,900 kg/h. The filter inserts each contain 19 pleated filter candles (60 x 1,000mm Ø). The filter medium comprises a sin-tered metal fiber nonwoven with a filtration fineness of 25 μm. This ensures that the melt remains free of contaminants and gel particles, which in turn enables the production of high-quality end products.

Source:

BB Engineering GmbH

(c) adidas
25.02.2022

adidas unveils its first product with Spinnova

  • The adidas TERREX HS1 is the first product created in partnership with textile material company, Spinnova
  • Part of the hoodie’s fabric is made from wood-based fibres
  • The adidas TERREX HS1 is a step on adidas’ journey to create nine out of 10 articles with a more sustainable technology, materials, design or manufacturing method by 2025

Eight months after adidas announced its partnership with Finnish textile material company Spinnova, the brand has unveiled its first product made in part with Spinnova fibres.

Composed of a minimum of 25% wood-based fibres and 75% organic cotton, the adidas TERREX HS1 is a mid-layer for hikers that sees adidas exploring a more sustainable textile solution.

  • The adidas TERREX HS1 is the first product created in partnership with textile material company, Spinnova
  • Part of the hoodie’s fabric is made from wood-based fibres
  • The adidas TERREX HS1 is a step on adidas’ journey to create nine out of 10 articles with a more sustainable technology, materials, design or manufacturing method by 2025

Eight months after adidas announced its partnership with Finnish textile material company Spinnova, the brand has unveiled its first product made in part with Spinnova fibres.

Composed of a minimum of 25% wood-based fibres and 75% organic cotton, the adidas TERREX HS1 is a mid-layer for hikers that sees adidas exploring a more sustainable textile solution.

adidas is committed to helping end plastic waste via a three-loop strategy that consists of using recycled materials, materials that can be remade into entirely new products, and, in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1. Its outdoor brand, adidas TERREX , is leading the innovation of technical materials with the aim of helping drive better product solutions for adventurers in nature while ensuring there is no compromise on style or performance .

By 2025, nine out of 10 adidas articles will carry a more sustainable technology, material, design, or method of manufacturing and adidas’ partnership with Spinnova is a major part of this journey.

24.02.2022

Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles

  • Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

  • Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

In the energy and transport sector, this means a vigorous and fast expansion of renewable energies, hydrogen and electromobility, the so-called decarbonisation of these sectors. The EU has already started pushing an ambitious agenda in this space and will continue to do so, for instance with the recently released ‘Fit for 55’ package.

However, these policies have so far largely ignored other industries that extract and use fossil carbon. The chemical and material industries have a high demand for carbon and are essentially only possible with carbon-based feedstocks, as most of their products cannot do without carbon. Unlike energy, these sectors cannot be “decarbonised”, as molecules will always need carbon. The equivalent to decarbonisation via renewable energy in the energy sector is the transition to renewable carbon in the chemical and derived materials industries. Both strategies avoid bringing additional fossil carbon from the ground into the cycle and can be summarised under the term “defossilisation”.

To decouple chemistry from fossil carbon, the key question is which non-fossil carbon sources can be used in the future. Rapid developments in biosciences and chemistry have unlocked novel, renewable and increasingly affordable sources of carbon, which provide us with alternative solutions for a more sustainable chemicals and materials sector. These alternative sources are: biomass, utilisation of CO2 and recycling. They are combined under the term “renewable carbon”. When used as a guiding principle, renewable carbon provides a clear goal to work towards with sufficient room to manoeuvre for the whole sector. It enables the industry to think out of the box of established boundaries and stop the influx of additional fossil carbon from the ground.

The systematic change to renewable carbon will not only require significant efforts from industry, but must be supported by policy measures, technology developments and major investments. In order to implement a rapid and high-volume transition away from fossil carbon, and to demonstrate its impact, a supportive policy framework is essential. The emphasis should be put on sourcing carbon responsibly and in a manner that does not adversely impact the wider planetary boundaries nor undermines societal foundations. An overarching carbon management strategy is required that also takes specific regional and application-related features into account, to identify the most sustainable carbon source from the renewable carbon family. This will allow for a proper organisation of the complex transition from today’s fossil carbon from the ground to renewable energy and to renewable carbon across all industrial sectors.

RCI has developed eleven concrete policy recommendations on renewable carbon, carbon management, support for the transformation of the existing chemical infrastructure and the transformation of biofuel plants into chemical suppliers. The policy paper “Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles” is freely available for download in both a short version and a long version.


Link for Download: https://renewable-carbon-initiative.com/media/library/

Source:

Renewable Carbon Initiative (RCI)

24.02.2022

VDMA textile machinery webinar on sustainable dyeing involved Monforts, DyStar® and Goller

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes at a temperature of between 120-130°C and a relative humidity volume of 25-30%.

Benefits
The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step.

Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

Complementary services and systems
Complementing the Monforts presentation during the webinar, Bertram Seuthe, Global Business Development Manager at DyStar, outlined the importance of specific Levafix® /Remazol® reactive dyes and Dianix® disperse dyes for sustainable dyeing processes such as Econtrol®, Cadira® Continuous and CPB knit. In these processes Sera® auxiliaries are also employed for optimised wash-off results.

Guido Seiler, Area Sales Manager at Fong's Europe, also introduced the latest developments of the Goller brand for the washing process, which can reduce water consumption by between 10 to 20%, as well as reductions in both heating energy and waste generation, depending on the specific fabric construction and required shade.

Source:

Monforts  / DyStar Singapore Pte Ltd

23.02.2022

GOTS marks 20th anniversary with all-time high in certified facilities

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

“What seemed utopian to many in 2002 has become a reality in the past 20 years. We have created an organic textile standard, certified by approved certification bodies, which is accepted in all major markets. GOTS is a standard that gives consumers the power to choose truly organic products sourced from sustainable supply chains.” says Claudia Kersten, Managing Director at GOTS. “Despite ongoing difficulties and uncertainty caused by the Covid-19 pandemic, decision-makers continue to pursue their sustainability goals and value GOTS as a tool to accomplish them”.

The results of the annual GOTS Survey among certified entities underline this. Out of 1.114 respondents (+39%), 63% indicated a permanent shift in their sustainability strategy with a focus on the environment and health of their workers and staff.

Growing interest from industry, the public, and the media drove website visits up an impressive 48%. Media exposure grew by 64% and GOTS social media followers across several platforms jumped by 57%.
“As much as we are pleased with the development so far, we don’t intend to rest on our laurels” adds Rahul Bhajekar, Managing Director at GOTS. “In March 2022 we begin revision for GOTS version 7.0 involving all stakeholders including associations, organisations, companies, and individuals to further advance the progressive, innovative, stringent yet practical standard of GOTS”.

More information:
GOTS
Source:

GOTS

(c) Flocus ™
22.02.2022

Flocus ™ kapok nonwovens and fabrics for the leather goods and footwear

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

Flocus ™, the trademark for kapok fibers, offers a range of kapok textile materials such as fibers, yarns, textiles and nonwovens. The company presents the most performing and zero carbon footprint solutions based on Flocus™ kapok available for the leather goods industry, a sector that is making an important transition to sustainability in terms of processing and raw materials.

As for nonwoven, some of their most used products in the world of leatherware are:

  • Maliwatt - 50% Kapok, 50% PLA (based on corn), a 100% biodegradable non-woven which can be used in the shoe sole. Maliwatt can be thermopressed/heat press and turned into a paper/cardboard type and lightweight structure. It is the perfect material for sneakers, casual and active shoes thanks to its quick dry, antibacterial, hydrophobic, hypoallergenic, Insulation properties. Other frequent applications are in the field of automotive, construction and car panels, sound absorption and acoustics panels and geo textiles.
  • HDE /Hydroentanglement - 50% Kapok, 50% Organic cotton. It is a 100% natural and biodegradable material that can be used in the shoe production as a sole, intersole or as a padding for shoes and bags. Thanks to its termoregulating, lightweight, hypoallergenic, thermoconductivity, insulation, soft touch, hydrophobic, anti-moth anti mite properties, it is used for a large range of applications. It is popular in the apparel world as a cruelty free filling for winter jackets, replacing duck down, and in the home industry ad a stuffing for mattresses, duvets, furniture, sleeping bags.

The offer for the leather goods industry includes also Flocus™ kapok-based fabrics in different blends and weights: linings, coatings, fabric inserts, accessories, components rich in performance and style. For example, kapok and organic cotton with GOTS certification, kapok with Tencel and recycled polyester (Repreve), kapok with linen, organic cotton and a small percentage of Spandex.

These materials were presented at the September 2021 edition of Lineapelle in the exhibition "A New point of materials", dedicated to eco-responsible innovations in terms of technologies, applications, materials and machines.

Source:

Flocus

(c) DUARTE / C.L.A.S.S.
22.02.2022

C.L.A.S.S.: DUARTE returns to Milan Fashion Week with its “Eco-Street Dance” collection

The 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub during Milan Fashion Week. With the support of WHITE, Duarte’s creations will be featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption).

The 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub during Milan Fashion Week. With the support of WHITE, Duarte’s creations will be featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption).

This time the inspiration is also Street Dance drawn directly from the city streets, with majorly unisex pieces (apart from some small specific details linked to sizes or ergonomics) and materials that both respect the planet and keep you warm. The prints drawn from ripped posters giving birth to a sort of new style named “Eco-Street Dance”.

The collection presents a selection of urban pieces for everyday superheroes, fighting against environmental issues - with a holistic approach to sustainability values thanks to the synergy with C.L.A.S.S. and its Back in the Loop area: a section dedicated to alternative and sustainable sourcing against the massive amount of materials and textiles produced that are not used and discarded by the fashion system. This is mostly powered by MAEBA International - and its ReLiveTex® fabrics - leader in selecting and repurposing premium Italian fabrics with exceptional 60 years of expertise in collecting high-quality materials from leading brands and textile manufacturers, and one of the first companies at an international level to be accredited for the UNI EN ISO 14021 certification which grants the traceability of the collected materials.

The linings complete the full sustainable picture, thanks to Bemberg™ by Asahi Kasei fabrics by Gianni Crespi Foderami. Bemberg™ is a new generation material made from the smart-tech transformation of cotton linter pre-consumer material, converted through a traceable and transparent closed loop process.

17.02.2022

C.L.A.S.S. will be at Filo to highlight the role of yarns in responsible innovation

The international eco-hub will be at Filo (23-24 February) with key partners such as Bemberg™ by Asahi Kasei, ROICA™ by Asahi Kasei, Ghezzi, Circular Systems™ and SUPREME GREEN COTTON® by Varvaressos to highlight the role of yarns in responsible innovation.

C.L.A.S.S. is ready for yet another moment dedicated to share and amplify its message of responsible innovation together with its key partners. The international eco-hub has been invited to attend the Filo fair with its own space in order to spread the word on the utmost importance of injecting innovation, sustainability and change starting from the very beginning of the supply chain.

“We are extremely pleased to be here at Filo, the fair for the very first and fundamental ingredient of fashion” Says Giusy Bettoni, Founder and CEO C.L.A.S.S. “We believe this is a valuable opportunity to  share possibilities and chances to start a conscious and yet innovative fashion product by learning about the latest developments in smart yarns”.

The international eco-hub will be at Filo (23-24 February) with key partners such as Bemberg™ by Asahi Kasei, ROICA™ by Asahi Kasei, Ghezzi, Circular Systems™ and SUPREME GREEN COTTON® by Varvaressos to highlight the role of yarns in responsible innovation.

C.L.A.S.S. is ready for yet another moment dedicated to share and amplify its message of responsible innovation together with its key partners. The international eco-hub has been invited to attend the Filo fair with its own space in order to spread the word on the utmost importance of injecting innovation, sustainability and change starting from the very beginning of the supply chain.

“We are extremely pleased to be here at Filo, the fair for the very first and fundamental ingredient of fashion” Says Giusy Bettoni, Founder and CEO C.L.A.S.S. “We believe this is a valuable opportunity to  share possibilities and chances to start a conscious and yet innovative fashion product by learning about the latest developments in smart yarns”.

(c) Global Fashion Summit, presented by Global Fashion Agenda
17.02.2022

Global Fashion Summit: Copenhagen Edition 2022 will return on 7-8 June

Global Fashion Summit, an international forum for sustainability in fashion, will convene core stakeholders across fashion, parallel industries, investment, policy and NGOs to forge alliances for a new era. The Summit is presented by Global Fashion Agenda, the non-profit organisation that fosters industry collaboration in fashion to drive impact, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2022, will return in physical form on 7-8 June in the Royal Opera House, Copenhagen, Denmark.

Global Fashion Summit, an international forum for sustainability in fashion, will convene core stakeholders across fashion, parallel industries, investment, policy and NGOs to forge alliances for a new era. The Summit is presented by Global Fashion Agenda, the non-profit organisation that fosters industry collaboration in fashion to drive impact, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2022, will return in physical form on 7-8 June in the Royal Opera House, Copenhagen, Denmark.

Formerly known as Copenhagen Fashion Summit, the forum has been renamed to manifest the organisation’s global outlook and reach. Global Fashion Summit will build on the 13-year history of the renowned Copenhagen Fashion Summit by strengthening its representation and connections with diverse perspectives from across the world. Therefore, the Summit will be hosted in various key cities in the future, in addition to its flagship edition in Copenhagen.
 
Under the theme ‘Alliances for a New Era’, Global Fashion Summit: Copenhagen Edition 2022 will endeavour to form previously inconceivable alliances within the fashion industry and examine atypical cross-industry alliances, in a bid to accelerate the transition to a net positive reality.
 
The theme will underly all elements of the Summit. It will be represented on the Summit main stage during plenary sessions consisting of high-level keynote speeches and panels. These will bring together speakers that are often perceived as direct competitors to have transparent conversations about their mutual challenges and collaborate to discuss the actions needed to tackle the urgent issues. The programme will also include industries such as transportation, food and energy, to consider the challenges that are similarly experienced in other sectors and learn from successful solutions that are being demonstrated outside of fashion.
 
Going beyond the stage content, the Summit will apply the theme in practical terms by mobilising leaders to implement immediate actions through newly formed partnerships with solution providers and other industry players, setting long-term industry commitments, hosting leadership roundtables and creating binding industry agreements that will provoke progress based on its sustainability performance level.
The Innovation Forum will present a curated exhibition of sustainable solutions. Participating brands will be able to connect with exhibitors covering the entire value chain – from innovative materials to on-demand manufacturing. The forum’s Matchmaking service will offer small and large fashion businesses the opportunity to advance their sustainability journey by being matched directly with relevant solution providers.
There will be an in-depth assessment of the impact that the Summit and its resulting alliances have on the industry. This will be published in the aftermath of the event, examining the concrete outcomes from the Summit and providing a baseline for future forums.

Source:

Global Fashion Agenda

(c) Iluna Group
04.02.2022

Iluna Group attends Première Vision with its "Smart Lace System"

From athleisure to fashion, via underwear, from sarongs to bodysuits, through evening and bridal gowns, up to the world of denim and high fashion, Iluna's lace continues to expand its applications, confirming its versatility, performance and beauty. Trends run and pass quickly, but Iluna lace remains a certainty in all its forms, variations and colors. Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.
There are four main proposals presented by Iluna Group during Première Vision ( 8-10 February 2022) :

From athleisure to fashion, via underwear, from sarongs to bodysuits, through evening and bridal gowns, up to the world of denim and high fashion, Iluna's lace continues to expand its applications, confirming its versatility, performance and beauty. Trends run and pass quickly, but Iluna lace remains a certainty in all its forms, variations and colors. Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.
There are four main proposals presented by Iluna Group during Première Vision ( 8-10 February 2022) :

  • Flock in flounce or allover entirely made with recycled ingredients and equipped with endless printing possibilities, with 3D and multicolor effects that allow the inclusion in fashion, underwear and athleisure looks. All certified GRS (Global Recycled Standard).
  • Continued investment in both the Green Label and Bioline, two collections totally dedicated to innovative and responsible aesthetics. Both include lace made with the responsible 6.6 polyamide yarn Amni Soul Eco® and the degradable stretch fiber ROICA™ V550, combined with natural vegetable dyes with OEKO TEX and GOTS certifications.
  • The union of a chenille yarn blended with FSC-certified viscose and Renycle® yarn, a product obtained by recycling nylon 6, a high-value material with excellent strength, dyeing, softness and versatility, gives life to surprising new Textronic. The embossed designs with 3D effect create a cloud effect that, combined with Lurex, gives unexpected glows.
  • GRS-certified tulles printed with GREENDROP technology, the new GOTS-certified digital pigment printing system, with lower energy consumption and low water waste, thanks to an internal closed-circuit process for water recycling.
Source:

Iluna Group / C.L.A.S.S.

01.02.2022

C.L.A.S.S. welcomes Circular Systems into its Material Hub

After the C.L.A.S.S. recent evolution of its communication tools, they are really pleased to introduce Circular Systems as new C.L.A.S.S. Material Hub partner.

Circular Systems is a California based materials science company, focused on creating a net positive impact on environment, society and economy through innovation. Its circular plus regenerative technologies provide systemic solutions for transforming waste into valuable fibre, yarns, and fabrics for the fashion industry.

Textile waste and agriculture residues are a huge problem, often burned, left to rot in the fields, or sent to landfills creating massive amounts of CO2. Circular Systems is looking at these waste streams as valuable resources, turning problem into a solution by converting them into high value materials for the fashion industry. The “Lightest Touch™“ philosophy, defines their mission to retain maximum amount of embedded energy in waste inputs while creating the “highest-value outputs” with the lowest impacts. Integration of these technologies into global supply chains is key without compromising quality, thus extending the life cycle of these materials.

After the C.L.A.S.S. recent evolution of its communication tools, they are really pleased to introduce Circular Systems as new C.L.A.S.S. Material Hub partner.

Circular Systems is a California based materials science company, focused on creating a net positive impact on environment, society and economy through innovation. Its circular plus regenerative technologies provide systemic solutions for transforming waste into valuable fibre, yarns, and fabrics for the fashion industry.

Textile waste and agriculture residues are a huge problem, often burned, left to rot in the fields, or sent to landfills creating massive amounts of CO2. Circular Systems is looking at these waste streams as valuable resources, turning problem into a solution by converting them into high value materials for the fashion industry. The “Lightest Touch™“ philosophy, defines their mission to retain maximum amount of embedded energy in waste inputs while creating the “highest-value outputs” with the lowest impacts. Integration of these technologies into global supply chains is key without compromising quality, thus extending the life cycle of these materials.

Circular Systems has three waste-to-fibre platforms that offer an efficient management of textile and agricultural waste:

  • The Agraloop™ refines natural fibers derived from agricultural crops into textile-grade fiber called Agraloop™ BioFibre™.  A NEW Natural Fiber mindfully sourced for circularity. With our specialized processing technique, cellulose fiber from stems and leaves are purified into soft fiber bundles ready to spin into yarns. The Agraloop™ processes leftovers from various food and medicine crops including, oilseed hemp/flax, CBD hemp, banana, and pineapple.
  • Texloop™ Recycling produces high-quality GRS (Global Recycled Standard) certified recycled cotton fibre called RCOT™. Texloop™ preserves fiber quality for the next generation of recycled materials and blends with GOTS (Global Organic Textile Standard) certified organic cotton and Canopy approved man-made cellulosics to create near virgin quality yarns for knitting and weaving.
  • Orbital™ hybrid yarns create high-quality materials with high-performance, using organic and recycled fiber inputs. Orbital's patent-pending technology produces inherent wicking and fast dry performance materials, even with 50%-70% natural fiber composition, eliminating the need for chemical finishes to create high-performance fabrics.

All Circular Systems yarns are GRS, OCS and/or GOTS certified and are in the process of developing  their own Crop Residue Standard with Textile Exchange that would relate to the Agraloop™ platform technology.

01.02.2022

EURATEX: High energy costs undermine crucial transformation of the textile and clothing industry

The current energy crisis is impacting on the competitiveness of the European textile and clothing industry. Because there are limited alternatives to the use of gas in different parts of the production process, production costs increase sharply. EURATEX asks the European Commission and Member States to urgently support the industry to avoid company closures. At the same time, we need a long term vision to move towards climate neutrality, while keeping the T&C industry internationally competitive.

EURATEX presented ten key requirements to Kadri Simson, European Commissioner for Energy, to develop such a vision:

The current energy crisis is impacting on the competitiveness of the European textile and clothing industry. Because there are limited alternatives to the use of gas in different parts of the production process, production costs increase sharply. EURATEX asks the European Commission and Member States to urgently support the industry to avoid company closures. At the same time, we need a long term vision to move towards climate neutrality, while keeping the T&C industry internationally competitive.

EURATEX presented ten key requirements to Kadri Simson, European Commissioner for Energy, to develop such a vision:

  1. The apparel and textile industry needs a safe supply with sufficient green energy (electricity and gas) at internationally competitive prices.
  2. The transformation of industry requires access to very significant amounts of renewable energy at competitive costs. Additional investments in infrastructure will also be needed to guarantee access to new renewable energy supplies.
  3. Until a global (or at least G 20 level) carbon price or other means for a global level playing field in climate protection are implemented, competitive prices for green energy must be granted at European or national levels (e.g. CCfDs, reduction on levies, targeted subsidies).
  4. As the European textile and clothing sector faces global competition mainly form countries/regions with less stringent climate ambitions, it is of utmost importance that the European textile and clothing companies are prevented form direct and indirect carbon leakage.
  5. EU-policy should support solutions, e.g. through targeted subsidies (for hydrogen, energy grids, R&D, technology roadmap studies etc.).
  6. A dedicated approach for SMEs might be appropriate as SMEs do not have the skills/know-how to further improve their energy efficiency and/or becoming carbon neutral.
  7. CAPEX and OPEX support will be necessary for breakthrough technologies, like hydrogen.
  8. The Fit-for-55-Package must support the European Textile and Clothing industry in decarbonization and carbon neutrality. The EU must therefore advocate a global level playing field more than before. The primary goal must be to establish an internationally uniform, binding CO2 pricing, preferably in the form of a standard at G-7 / G-20 level.
  9. EU-policy must not hinder solutions, e.g. we need reasonable state aid rules (compensating the gap between national energy or climate levies and a globally competitive energy price should not be seen as a subsidy).
  10. The European Textile and Clothing industry has made use of economically viable potentials to continuously improve energy efficiency over many years and decades. The obligation to implement further measures must be taken considering investment cycles that are in line with practice. Attention must be paid to the proportionality of costs without weakening the competitive position in the EU internal market or with competitors outside the EU.

Please see the attached position paper for more information.

Source:

EURATEX

(c) Archroma
01.02.2022

Archroma launches a new vegan textile softener

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Siligen® EH1 is ideally suited for shirts, underwear, sportswear, towels, bed sheets, etc. as it provides an excellent wearing comfort by supporting a good moisture transportation and delivering a smooth and soft touch.

The new softener, and the EARTH SOFT system which also includes a Hydroperm® wicking agent to boost hydrophilic properties on synthetic and blended fibers, can be applied on all natural and synthetic textile fibers.

Siligen® EH1 is suitable for both woven and knitted articles. It can be applied by padding process, as well as by exhaust process as it shows a very good shear stability and a low foaming profile. It can be used on white articles and those treated with optical brighteners, as it doesn’t cause thermomigration nor phenolic yellowing.

Paul Cowell, Head of Competence Centers for Brand & Performance Textile Specialties at Archroma, comments: “The new EARTH SOFT system based on Siligen® EH1 softener adds to our growing portfolio of innovations based on natural and renewable plant-based resources. This new breakthrough innovation by Archroma helps us and our partners in the textile and fashion industry to minimize our dependence on petroleum fossil fuel products.”

Source:

Archroma

(c) Iluna Group
31.01.2022

"Smart Lace System" of Iluna Group at Milano Unica

  • Based on high-tech finishing, responsible materials and certified partnerships
  • With multicolored flock, zero water printing, chenille and metallic effects, the company is at the forefront in establishing a responsible lace supply chain

Legend has it that a sailor brought his beloved a seaweed from distant seas as a gift. The woman, wanting to preserve its beauty, replicated the design and holes with needle and thread. And so lace was born. Since that moment, lace has lived within the walls of churches and castles, visited race tracks and catwalks, changing shape and color according to seasons and times.

Among the companies involved in writing a new chapter in the history of lace, Iluna Group definitely stands out. Founded in 1970 from an idea of its founder Luigi Annovazzi, over the years Iluna has responded to the challenges posed by the market in terms of technology and sustainability.

Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.

  • Based on high-tech finishing, responsible materials and certified partnerships
  • With multicolored flock, zero water printing, chenille and metallic effects, the company is at the forefront in establishing a responsible lace supply chain

Legend has it that a sailor brought his beloved a seaweed from distant seas as a gift. The woman, wanting to preserve its beauty, replicated the design and holes with needle and thread. And so lace was born. Since that moment, lace has lived within the walls of churches and castles, visited race tracks and catwalks, changing shape and color according to seasons and times.

Among the companies involved in writing a new chapter in the history of lace, Iluna Group definitely stands out. Founded in 1970 from an idea of its founder Luigi Annovazzi, over the years Iluna has responded to the challenges posed by the market in terms of technology and sustainability.

Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.

There are four main proposals presented by Iluna Group during Milano Unica:

  • Flock in flounce or allover entirely made with recycled ingredients and equipped with endless printing possibilities, with 3D and multicolor effects that allow the inclusion in fashion, underwear and athleisure looks. All certified GRS (Global Recycled Standard).
     
  • Continued investment in both the Green Label and Bioline, two collections totally dedicated to innovative and responsible aesthetics. Both include lace made with the responsible 6.6 polyamide yarn Amni Soul Eco® and the degradable stretch fiber ROICA™ V550, combined with natural vegetable dyes with OEKO TEX and GOTS certifications.
     
  • The union of a chenille yarn blended with FSC-certified viscose and Renycle® yarn, a product obtained by recycling nylon 6, a high-value material with excellent strength, dyeing, softness and versatility, gives life to surprising new Textronic. The embossed designs with 3D effect create a cloud effect that, combined with Lurex, gives unexpected glows.
     
  • GRS-certified tulles printed with GREENDROP technology, the new GOTS-certified digital pigment printing system, with lower energy consumption and low water waste, thanks to an internal closed-circuit process for water recycling.
(c) Sitip
21.01.2022

Sitip presents COSMOPOLITAN Fashion-tech fabrics at Milano Unica

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

Source:

Sitip / Valeria Rastrelli