From the Sector

• Monforts customer Kipaş has been selected as the sole denim manufacturing partner in the €6.7 million European Union-funded New Cotton Project, involving the brands adidas and H&M, working in a consortium with suppliers, innovators and research institutes.

Kipaş, based in Kahramanmaraş, Turkey, is currently installing its third Monforts Montex stenter along with a third Monfortex compressive shrinkage system in a combined configuration dedicated to denim production.

This follows the successful installation and commissioning of the second Montex and Monfortex lines at the Kahramanmaraş plant in 2018, which Kipaş Vice Chairman of the Board Ahmet Öksüz said had immediately exceeded expectations.

“We performed a very thorough technical investigation based on the latest Industry 4.0 analysis before the purchase, to determine what we needed, and the Monforts technology met all our requirements,” he said, in an interview with Textilegence magazine. “The Monfortex is equipped with a variety of features not found on classical shrinkage machines and the production can be monitored from beginning to end. It also exceeded our expectations in energy cost savings.”

Kipaş subsequently received a special certificate from Monforts in recognition of its exceptional utilisation of the technology to its full potential.

The latest Montex stenter now being installed at Kipaş is a 12-chamber unit with a working width of 2 metres featuring all of the latest automation features. The Monfortex unit, also with a working width of 2 metres, is in a ‘double rubber’ configuration, comprising two compressive shrinkage units and two felt calenders in line. This allows the heat setting of elastane fibres and the residual shrinkage of the denim to be carried out simultaneously, for a significant increase in production speeds.

“Around 90-95% of denim fabric production now contains elastane fibres and the Monforts system has allowed us to simultaneously increase our production and quality in this respect,” Mr Öksüz said.

Regenerated cotton
For the next three years within the New Cotton Project, Kipaş will manufacture denim fabrics based on the cellulose-based fibres of Infinited Fiber Company of Finland, made from post-consumer textile waste that has been collected, sorted and regenerated.

The patented technology of Infinited, which is leading the consortium of 12 companies, turns cellulose-rich textile waste into fibres that look and feel like cotton.

“We are very excited and proud to lead this project which is breaking new ground when it comes to making circularity in the textile industry a reality,” said Infinited co-founder and CEO Petri Alava. “The enthusiasm and commitment with which the entire consortium has come together to work towards a cleaner, more sustainable future for fashion is truly inspiring.”

Take-back programmes
Adidas and H&M will establish take-back programmes to collect the clothing that is produced, to determine the next phase in their lifecycle. Clothing that can no longer be worn will be returned to Infinited, for regeneration into new fibres, further contributing to a circular economy in which textiles never go to waste, but instead are reused, recycled or turned into new garments.

The aim is to prove that circular, sustainable fashion can be achieved today, and to act as an inspiration and stepping stone to further, even bigger circular initiatives by the industry going forward.

The EU has identified the high potential for circularity within the textile industry, while simultaneously highlighting the urgent need for the development of technologies to produce and design sustainable and circular bio-based materials. Making sustainable products commonplace, reducing waste and leading global efforts on circularity are outlined in the European Commission’s Circular Economy Action Plan.

Fashion brands produce nearly twice as many clothes today as they did 20 years ago and demand is expected to continue growing. At the same time, the equivalent of one garbage truck of textiles is landfilled or burned every second. Most of the textile industry’s environmental problems relate to the raw materials used by the industry – cotton, fossil-based fibres such as polyester, and viscose as the most common man-made cellulosic fibre, are all associated with serious environmental concerns.

• Lakmé Fashion Week 2020
• Bemberg™ fibers empower “Tattva”
• Hemang Agrawal's new craft-tech collection

Smart tech fibers, contemporary style and heritage. Past, present and future are intertwined in the new ‘Tattva’ collection by famous Indian designer Hemang Agrawal who has teamed up with Bemberg™ by Asahi Kasei, the Japanese yarn manufacturer leading in both high-performative innovation and sustainability. The collection comprises textiles entirely conceived and created by the designer. A new chapter for Bemberg™ glamorous uniqueness for high-end fashion, first Japanese reality that participated at Lakmé Fashion Week 2020, the biggest fashion event in India.

Made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, Bemberg™ fibers add responsible values to the collection, matching perfectly the vision and the ethic of Hemang Agrawal, a designer with more than one eye on sustainability, innovation and deep knowledge and respect for traditional Indian crafts and culture.

Tattva debuted at the Lakmé Fashion Week 2020 and comprises 40 exquisite pieces for men and women, all inspired by the 12 Tattva – the natural elements bringing harmony in the universe, according to the Indian scriptures and tradition. Motifs representing these elements, including quirky versions of moon-phases, tigers, human mind & DaVinci’s Vitruvian man were woven into the glittering fabrics. The collection was crafted harnessing the skills of Indian handlooms artisans in the designer’s hometown Benares (Varanasi).

Tattva featured Bemberg™ brocades as the predominant textile, along with plain Bemberg™ fabrics and a few blends. The result is a magnificent touch, fabrics are distinctively smooth like silk, second skin-like, shining, and bright. On top of that, Bemberg™ yarns add a new dimension in terms of sustainability and comfort by boosting antistatic and breathable performances, amazing precious touch while being also biodegradable and compostable.

“We are so happy that we participated in LFW and collaborated with Hemang Agrawal.” Says Mr. Hideto Tanimoto, General Manager, Bemberg™ Sales and Marketing Department. “The collection has come out really wonderful and has brought out the properties of Bemberg yarn such as noble sheen, smooth and soft touch, bright colour, supple drape amazingly. I strongly believe that the collection made significant impact on the sustainable fashion scene in India. We are expecting that the collection will be successful commercially and will help the local craftsman from Varanasi.”

The collection blends crafts and technology, Indian tradition and Japanese innovation, sustainability and high-end style. Designer Hemang Agrawal says, “The dexterity which the weavers in Benares have acquired, finds few parallels in the world. Although predominantly a silk-weaving centre, many master-weavers in the city are highly skilful in handling different yarn types. Japan, on the other hand, is well-known for its advanced technologies as well as its approach towards environment and sustainability as a country. Both these facts are well-reflected in the Bemberg™ Yarn”

“During our R&D, we found that the yarn, which is available in various counts and deniers is highly adaptable. The lustre, hand-feel, strength and colour depth are very well-suited for premium textiles, which come out of our looms. For the collection ‘Tattva,’ our endeavour has been to merge the skill-set of Benares weavers with qualities of the Bemberg™ yarn, to create textiles and apparel, which transcend the boundaries of what is termed as traditional Benarasi."

With the Tattva collection Hemang Agrawal and Bemberg™ by Asahi Kasei show a new way of making fashion: merging craft & tech, cutting-edge materials and deeply rooted traditions. A stunning collection marking the rise of craft-tech, a trend going beyond the dichotomy of ancient and new, injecting the human-based into the high-tech and a futuristic imprint into heritage. Like the 12 Tattva, a new harmony takes shape, intertwined into exquisitely stylish garments.

Masks yes, but with comfort, safety and also style: Cifra, Iluna Group, Rosti and Sitip launch masks with a fashion touch with the premium stretch fiber ROICA™
 
Big companies are updating their productions with high-performance and high technical characteristics masks, result of their historical experience and thanks to an exceptional partner in common: the premium stretch fiber ROICA™ by Asahi Kasei. And the solidarity race continues to donate them to hospitals and to the Red Cross
 
Forced to keep most of the face covered and often for a long time during the day, solutions that are above all performing and comfortable become increasingly necessary.

And solutions that are also a manifestation of our personality, which remains hidden and entrusted to the mere expression of the eyes. Walking on the streets we sometimes even don’t even recognize each other, since we are so hidden; and the desire to minimize the situation often takes over, together with that desire to make us recognizable, to possess and express an identity anyway. For fans of escaping homologation (now more than ever mandatory and for this reason even more difficult) “rescue comes” - and this is the case to say it - from illuminated companies who have thought about creative solutions for those with masks has to do all day, at home, at work, during sports and in leisure time. To feel more comfortable, there are many proposals: more “street style” for sports addicted and young people - inside and outside -, more elegant and sophisticated for women.

Textiles companies have joined the fight against Covid-19 engaging a strong and decisive personal and productive battle, which has seen many of them transform and convert their production units for the production of masks and gowns intended for medical personnel and the community.

Some of the most established excellences of the textile sector as Cifra, Iluna Group, Rosti and Sitip have made use of the precious collaboration of ROICA™, the premium stretch fiber by Asahi Kasei. ROICA™ is the innovative and smart premium ingredient chosen by these companies to guarantee even more comfort, thanks to an exceptional top-level component that gives elasticity for perfect adherence to the skin. Each of the companies then declined its production according to its specificity. And this is their important contribution.

Cifra presents the eco-sustainable version of the mask, the ECO-MASK™, which combines the high performance of Cifra knitting technology with the sustainability of the materials used. The 100% regenerated yarns create a 100% sustainable mask with 83% ECONYL and 17% ROICA™ V550 elastomer, the stretch fiber certified Cradle to Cradle Gold Health Level which allows excellent and lasting printability, as well as advantages regarding the circular economy as it does not release harmful substances into the test environment according to the Hohenstein Environmental Compatibility certification.

Iluna Group, European leader in the production of lace, has recently donated 400 protective “smart”  made with ROICA™ EF, the world first GRS - Global Recycled Standard – certified elastomer and which uses 58% of pre-consumer recycled content, mixed with Q-NOVA® by Fulgar. Multi-use, washable, bacteriostatic, breathable and water-repellent prevention masks gave to San Gerardo Hospital in Monza to answer to the Call to action launched on March 19th by the green journalist Diana De Marsanich, with the responsible and innovative materials expert Giusy Bettoni of C.L.A.S.S. Eco Hub, the fashion designer Marina Spadafora of Fashion Revolution Italia and the entrepreneur Simona Roveda of LifeGate. Iluna Group also announces the launch of the website dedicated to the direct sale of the different kind of masks all made with three layers, antibacterial and anti-drip treatment and washable up to 10 times. Iluna Group has also created the “smart” masks made with ROICA™ EF, the world first GRS - Global Recycled Standard – certified elastomer and which uses 58% of pre-consumer recycled content, mixed with Q-NOVA® by Fulgar.

In addition to the “smart” masks, available for women, men and children, Iluna Group has created two special versions of Lace Masks, covered with refined lace. One embroidered on a cotton base and one with soft microfiber.

Rosti, historic knitwear factory based in Brembate specialized in the design and production of cycling clothing with the best technical fabrics and the most advanced technologies, has put its experience at the service of the production of protective masks washable up to 20 times, made with Sitip fabric and with the anti-drop treatment Ecoacquazero®. Fascinating and protective like a second skin, the masks are sold in a pack of 10 pieces with captivating, colorful, geometric and original graphics, designed for every personality.

Rosti masks contain the premium stretch fiber ROICA™ Resistance, a family of premium stretch yarn with particular performances of resistance and durability.

Sustainability is part of SEEK’s internal make-up and has always been part of the team and community experience. Over 80 sustainable brands make up the brand portfolio, including players like Veja, Dedicated and Kings of Indigo. Experts will be sharing their experiences on this market-defining topic as well, with a host of live podcasts, talks and panel discussions, and will be shaping SEEK’s programme of content.
 
BIG PLAYER: the new SEEK Culture
 
SEEK is Europe’s most successful trade show for pop, street and sneaker culture. This is where the key players meet, where the looks of tomorrow are showcased, modelled and retold, where classics are celebrated, authenticity rules the roost and where icons take their positions alongside shooting stars. SEEK is essential participation for anyone looking to curate a modern, youthful and relevant range.

The shift from a niche event to a large trade show is now complete with a new logo and campaign design. SEEK has emerged from its transformation to reveal that its content and visual look are as relevant as ever!  

Together with creative agencies Karl Anders and Haebmau, the SEEK team has been working for weeks on the brand’s new branding. The result: a visual concept with a strong message.

“The handshake is the right imagery and commitment to our stance and that of the SEEK community.”

“SEEK stands for strength and business just as much as for communality and good vibes! ‘Get Along’ articulates a feeling of agreement, of moving forward and getting to grips with things. We all want to shape a positive future for our industry – as partners and by joining forces.”, explains Fashion Director Maren Wiebus.

CREATIVE CONNECTION: Karl Anders and Haebmau
 
The Hamburg-based agency Karl Anders, which was established by Claudia Fischer-Appelt and Lars Kreyenhagen, was commissioned to come up with the creative concept and design language for the logo and campaign.

“With the new look we are entering a new era for SEEK as a brand. Lots of brands have chosen a design using Helvetica in recent years,” says Claudia Fischer-Appelt, Creative Director at Karl Anders. “We are now signalling a clear shift in another direction. Confident, bold and independent. With the logo we are inviting the viewer to play with the linear layout in their head; we are breaking viewing habits, making a statement and revving things up a gear. SEEK, there it is.”
 
The artwork is the result of a process of in-depth debate with the SEEK brand that took place over several weeks both within the team and also with the support of lifestyle agency Haebmau. Workshops, research and analyses ultimately led to a new, strong brand identity. SEEK is focussed on both established and new players and stands for the WE.

“I have known SEEK since it was in its infancy, so to me it was always like a little brother of the large, successful PREMIUM. Quirky and different, always interesting but somehow not quite so imposing,” says Markus Bublitz, Executive Creative Director at Haebmau. “SEEK today is more grown-up, confident and sharper. Thanks to its position in the market, which it has conquered over the years, it no longer needs to please everyone but can afford to be controversial. This can offer space for new, creative ideas.”

SEEK is edgy, clean-cut and unpolished.

We are all about statement design, new classics, denim and sportswear. SEEK is the trade show event for the fashion community. SEEK knows who calls the shots; it boosts sales and is the place for the next generation of decision-makers to get together. Unlike all the others, SEEK is unconventional and the antidote to boring.

Following its successful beginnings in summer 2018 and its expansion in January 2019, TRADE UNION will be developed yet further as a dedicated space for selected brands and agencies.
 
“TRADE UNION is very close to our hearts,” explains SEEK Director Maren Wiebus. “Being able to work together to fill a space with life, interact with customers and products, and tell authentic stories in a laid-back, relaxing atmosphere – this open-minded, collaborative approach is ultra-modern and of the minute in its simplicity. We are all in the same big boat and can consider ourselves lucky that colleagues and customers are and have become friends. Together, we can achieve a lot this way.”

It has always been integral to SEEK’s DNA to continually work with partners and friends to develop new concepts that are perfectly suited to the demands of the market. The carefully curated setting of TRADE UNION, featuring brands such as Eat Dust, Porter-Yoshida & Co and Knickerbocker, is especially popular with the top buyers.
 
Felix Engelmann has supported the concept right from the off through his marketing agency Haptiques, and is full of passion and on board again with the concept this season.
“The TRADE UNION concept really came off for us in January. We worked well with our partners; the vibe was positive and nicely relaxed. I’m expecting the atmosphere in the summer to be just as fantastic and I’m sure it’ll be a good occasion with friends, partners and employees.”
 
In July, buyers can look forward to an expanded portfolio including Red Wing Shoes, a brand from Minnesota. European Marketing Manager Rik van Dijk comments:
“We can't wait to attend the inspiring setting, because our buyers really feel at home there. We need a location where you can take a step back, find a quiet place to sit and talk to everyone. The extra space at the TRADE UNION guarantees this. We’ve only heard good things from friendly brands and we’re really looking forward to the trade show.”

It is denim season again and we all eagerly anticipate what’s next; what will follow on from trends in eco-responsible production, gender adaptability in styling and innovations to deliver true consumer personalisation? What will be the big new denim story? Is the skinny jean dead yet?

Whether it’s the re-invented five pocket jean with wide or tapered leg shaping or a chino style sitting high at the waist, one thing remains constant- jeans must fit perfectly! Consumers face this problem every season, as brands adopt new design trends. As an industry how can we best deliver fashion, newness and also democratise fit?

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

During production, some of the aniline stays locked into the indigo pigment and is difficult to wash off the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. As a result of its toxicity (more hazardous than alkylphenols) it is now starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers.

The new Denisol® Pure Indigo 30 liq was therefore developed as an aniline-free* indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Archroma tested Denisol® Pure Indigo at Absolute Denim mill in Thailand. Archroma wanted to be sure that the new indigo dye would perform exactly the same as conventional indigo.

James Carnahan, Head of Sustainability at Archroma, comments: “At Archroma we continuously challenge the status quo in the deep belief that we can make our industry sustainable - but we cannot do it alone. Without forward-thinking manufacturers such as Absolute Denim to consciously adopt these eco-advanced innovations in their daily production, like our aniline-free* Denisol® Pure Indigo, we will not be able to move this industry forward on our resource-constrained world we live in. As consumers are increasingly aware of, and concerned about, climate change and ecological threats, this is not only the right thing to do - it is also good for business.”

“Deep down inside most of us want the world to be a better place for our loved ones and for future generations,” insists Vichai Phromvanich, Board Member, Absolute Denim, “starting with how we live, what we eat, what we wear, still trying to be cool, fashionable, still trying to be environmentally conscious. Archroma’s aniline free indigo project is therefore something we as a new generation manufacturer have supported from the beginning, by opening our doors for tests in the project phase, and now by sending out our articles to many of our customers. For us, after all, a nice pair of jeans looks even nicer without aniline!”

* Below limits of detection

• Huntsman Textile effects redefines dyeing of polyester including microfiber and blends with UNIVADINE® E3-3D diffusion accelerant
• Eco-friendly diffusion accelerant provides reproducible, high-speed polyester dyeing

Singapore – Huntsman Textile Effects introduces UNIVADINE® E3-3D next-generation diffusion accelerant to help mills achieve high-performance dyeing of polyester, microfibers and blends in an environment-friendly way that complies with current and anticipated industry sustainability standards.

The demand for polyester and man-made fibers is booming as sports and athleisure apparel markets expand rapidly around the world. At the same time, big-name brands that set trends in the sector continue to increase focus on sustainability and performance. As such, this is putting pressure on mills since the current industry standard involves chemically active diffusion accelerants that contain unwanted chemicals and require additional leveling agents and anti-foaming products that may be hazardous to people and the environment.

Developed by Huntsman Textile Effects specifically to meet these challenges, UNIVADINE® E3-3D diffusion accelerant is low-odor, free of benzyl benzoate and other hazardous substances. Part of Huntsman’s range of innovative dyEvolution™ dyeing auxiliaries, it uses Huntsman’s Active Diffusion Technology to enable high-speed dyeing with best-in-class leveling, retarding and migration properties.

“UNIVADINE® E3-3D diffusion accelerant delivers across three key dimensions – diffusion, leveling and migration – for exceptional performance and environmental and economic sustainability. Its environmental credentials offer mills greater processing flexibility and an optimum price-performance ratio,” said Kerim Oner, Global Marketing Manager for Dyeing Auxiliaries at Huntsman Textile Effects. “We expect this latest offering to change the way that the industry dyes polyester and blends while meeting stringent environmental standards.”

UNIVADINE® E3-3D diffusion accelerant has a high affinity to polyester, causing the fiber to swell and increasing the diffusion of the disperse dye, even at lower temperatures. Multiple leveling mechanisms then slow down the exhaustion rate to ensure safe, defect-free dyeing. Finally, as the dye bath heats up, the product’s strong support for disperse dye migration ensures the dye molecules are evenly absorbed.

As a result of this cutting-edge diffusion technology, UNIVADINE® E3-3D diffusion accelerant can be used to successfully dye polyester fibers in tightly wound or high-density yarn/beam dyeing and is suitable for jet applications without the need for anti-foaming products. Reducing exposure to high heat, its Active Diffusion Technology minimizes the potential to damage the elastane in polyester-elastane blends and provides for on-tone dyeing of microfibers. The superior migration support of UNIVADINE® E3-3D diffusion accelerant also increases reproducibility, allowing mills to dispense with additional leveling agents. Polyester, microfibers and blends treated with UNIVADINE® E3-3D diffusion accelerant comply with the requirements of bluesign®, in addition to being suitable for Standard 100 by OEKO-TEX® and an approved input dyeing auxiliary chemical for GOTS (Global Organic Textile Standard) certified textile products*.

From 3-5 July BRIGHT welcomes big names, young talents and influential media from the skateboarding community, to share old tales and tell exciting new stories. From b2b2c: the whole skate universe is invited to explore the latest streetwear, hero brands, entertaining skate action and the energy of a big 3-day celebration – all for the love of skateboarding. Here‘s a round-up:

ADIDAS SKATEBOARDING X SKATEDELUXE
To celebrate the blending of culture and community, this summer adidas Skateboarding and Skatedeluxe are joining forces. At BRIGHT the collaboration will be celebrated on a specifically designed street course open to the public! The whole community is invited to experience the latest product release surrounded by special activities such as skate sessions at the skate course, art installations and brand experiences.

SUPPORT THE SKATE COMMUNITY WITH LONG LIVE SOUTHBANK
BRIGHT is more than happy to welcome LLSB with an incredible exhibition from Southbank‘s five decades of history, with pieces of art donated to the campaign by the likes of the Gonz, Ed Templeton, Pontus and many more expected.

LLSB is a community group set up to campaign for the world-famous Southbank Skate Spot in the centre of London, UK. Having saved the space from destruction in 2014, LLSB is now fundraising €900,000 to restore legendary sections of the space special to skateboarders around the world.

HANDS ON WITH NATIVE TEENAGE STUDIO
Contemporary culture cannot exist solely through the sharing go digital “lifestyles”: in collaboration with Berlin-based photographer Johannes Böttge‘s own project NATIVE TEENAGE and contributors from the art, music and photography scene, NATIVE TEENAGE STUDIO showcases an all-day workshop format (3-5 July) at BRIGHT’s b2c area. While it focuses on transforming a broad spectrum of visual stimulation, information and communication into physical space, it aims to bridge gaps in generations and groups, translating them into curiosities.

EMPOWERING WOMEN IN SKATEBOARDING
Meet Clara Knör & Laura Kaczmarek who will exhibit their latest work at BRIGHT!

DC X BRIGHT OPENING PARTY
DC Shoes proudly presents BRIGHT´s official Opening Party at Wilde Renate. Including highly entertaining skate action by global heads and local top dogs. Supported by notorious hip-hop DJs, a sizzling BBQ, cold beers and drinks, bright sunshine and – of course – the guests themselves, who are in town during Berlin Fashion Week – you and your friends are invited! 3 JULY | 5:30 PM | WILDE RENATE

RIDE HIGH WITH IRIEDAILY
The winner takes it all with a juicy cash reward, at the contest for the highest wallride brought to you by Berlin‘s own IRIEDAILY. Free booze and fun for free minds.

CPH OPEN VIBE
CPH Open is taking the show on the road – to Berlin! CPH-BER is going down this August, and to heat the city up a bit, CPH Open is spreading the vibes at BRIGHT – you’re invited!

Lectra brings together partnership schools and industry experts to discuss how changing professions
in fashion are impacting training programs

Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather,
technical textiles and composite materials, recently welcomed partners from the world of
education to the company’s Bordeaux-Cestas campus for its eighth education congress. The
event was dedicated to the mega trends shaping the fashion industry and impacting
professions from design to production.

Over fifty representatives from among the most important fashion schools in Germany, Canada, China,
USA, France, Hong Kong, Italy, The Netherlands, Poland, United Kingdom, Switzerland and Sweden, participated
in this biannual meeting between industry experts and teaching professionals.

Fashion professions are evolving as companies make their first steps towards Industry 4.0, adopting 3D
and rationalizing the lifecycle management for their collections thanks to PLM. Lectra’s congress enabled
schools to discuss the developing role of designers and patternmakers, and the new elements to be
integrated into training programs.

Lectra illustrated future changes through presentations on design, patternmaking, 3D prototyping, and PLM.
“It is fundamental to bring innovation experts in the industry together with fashion schools, because
students will drive the evolution of this industry,” stated Pascal Denizart, Managing Director of the Centre
européen des textiles innovants (CETI).

Working with schools to design courses which meet the needs of fashion companies has always been at
the heart of Lectra’s education program. During the event, the company presented collaborative
experiences between partner schools and fashion brands, such as the competitions organised by Lectra
with Missoni, Balenciaga, and Armani in Italy, as well as Peacebird in China and JC Penney in the United
States.

In the United Kingdom, Lectra collaborated with COS (H&M group) and the Arts University Bournemouth
(AUB) for a competition centred on the design of a collection with zero waste.
“The process was totally digital, from design to the creation of a virtual prototype in 3D. Our students learnt
to optimize each stage of the process. By leveraging the use of Kaledo®, Modaris® and Diamino®, the
collaborative work between AUB, COS and Lectra is exactly the type of project that enormously motivates
our students. Live briefs developed with leading fashion brands and Lectra offer excellent opportunities
which directly inform industry currency and student employability,” explained Penny Norman, a lecturer at
AUB.

The event also shone the spotlight on China and its major role in the evolution of the fashion industry.
Li Min, Vice-Dean of the fashion and design faculty at Donghua university in Shanghai spoke of the event,
organized by Lectra, which brought together major Chinese companies, experts, and representatives from
the biggest schools in China.

“Exchanges on the impact of the Made in China 2025 plan on the fashion industry can better prepare
students for tomorrow’s professions, where digital and automation will occupy a far more central position
than today,” testified Li Min.

"The fashion industry is evolving so fast that sharing insights and best practices with experts and other
fashion schools has become vital to ensure we offer the best learning experience and technology tools to
our students", said Dr. Trevor J. Little, Professor of Textile and Apparel, Technology and Management in
the College of Textiles at NC State University.

“Lectra’s eighth education congress confirms the company’s commitment to our partner schools. We
shared our analysis of the market, the digitalization of the eco-system, and how Industry 4.0 principles can
be applied to the fashion industry. We also discussed mass customization and the role of PLM. While these
are key subjects for our customers, many schools are only now approaching them. We are preparing
tomorrow, today: Lectra is supporting our customers, and schools to play an essential role,” concludes
Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra.