From the Sector

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

The sustainable wear2wear concept is synonymous with high-quality, responsible clothing. In European operations, textile fibres from used garments are used to produce new functional fabrics. Depending upon the area of intended use, they also meet strict waterproofing, breathability, protection and comfort requirements. To ensure that the raw material cycle comes full circle, these textiles can be recycled again when they reach the end of their service life. As a result, there is no waste, and they go on to produce new garments. As the wear-2-wear partner companies guarantee that – from the quality of the raw materials to the guaranteed recycling end process – these are 100 percent recyclable, functional fabrics made of recycled textile fibres. Water- and dirt-repelling technologies based on renewable raw materials, along with the most advanced membrane technology, will ensure that the textiles are manufactured and impregnated entirely without the use of PFC in the future too.

Five partner companies  
The five European partner companies in the wear2wear cooperation cover the entire recycling loop. Heinrich Glaeser Nachfolger GmbH is a German fibre and yarn producer and the “recycler” in the loop. Märkischen Faser GmbH (D) is the “upcycler” and fibre manufacturer. Carl Weiske GmbH & Co. KG (D) develops the polymers, fibres, yarns, chemical additives and textile systems, and TWD Fibres GmbH (D), a fully-integrated filament yarn producer, covers the entire range of polyester and polyamide 6.6 continuous filament yarns. Schoeller Textil AG, the innovative Swiss company, is responsible for textile production and manufactures sustainable high-tech fabrics with maximum clothing comfort. The matching climate-neutral and similarly 100 percent recyclable PTFE and PFC-free membrane, as well as recycled outer materials and linings, are supplied by Sympatex Technologies (D), the ecological alternative among the textile function specialists. DutchSpirit is a Dutch company which has been dedicated to environment-friendly clothing since 2010. Its mission is to significantly increase the awareness for sustainable clothing and offer recyclable clothing in the workwear segment. DutchSpirit is the initiator for the development of the Inspire products from Schoeller Textil and provided the inspiration for the wear2wear concept. Further garment-making partners who now also belong to the cooperative group include: Anchor Workwear BV (NL), Hüsler Berufskleider AG (CH), Groenendijk Bedrijfskleding BV (NL), Bedrijfskledingdiscounter BV (NL) and Rifka'S (NL).

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, received the prestigious Technical Innovation Award from the Flexographic Technical Association (FTA) for its recently introduced SteadyPrint print-stabilization technology. This award was presented May 5, 2019, at the FTA Forum 2019 awards banquet held in New Orleans.

SteadyPrint, now part of PCMC’s Fusion and ELS Max flexographic presses, couples innovative patented mechanical designs with cutting-edge disturbance-cancelling algorithms that suppress disturbances associated with the hard edge, largely removing the impact of bounce in flexographic printing. The press automatically learns when the disturbance occurs on each job and implements the cancellation algorithm to minimize or eliminate the impact on print quality.

“We are extremely excited to be a recipient of the 2019 FTA Technical Innovation Award,” said Rodney Pennings, PCMC’s Printing, Coating and Laminating Sales Director. “The entire PCMC team has worked very hard in developing SteadyPrint over the past couple of years. It is an innovation that we are quite proud of, and we appreciate the accolades that showcase SteadyPrint within the package-printing industry. Winning this award in the year we are celebrating our 100-year anniversary is also incredibly meaningful.”

• Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

At ITMA 2019 in Barcelona from June 20-26 FONG’S Europe, a member of CHTC FONG’S International Group, will be providing details of its new THEN Supratec LTM hydraulic long-tube dyeing machine.

This machine is distinguished by the ability to vary the angle of the Then Flexkier for either dry (jet) or wet (overflow) mode dyeing, in order to optimise the dye liquor ratio – from 1:15 down to 1:4 – depending on the materials being dyed.

This translates into considerable savings in auxiliaries, water and energy.

The Supratec LTM is suitable for the treatment of both woven and knitted fabrics ranging from the most sensitive articles to heavyweight materials within the weight range of 25 g/lm to 380 g/lm, and operates at very low tension due to the extremely low lifting height between the variable nozzle and the plaited fabric.

“Existing Supratec machines on the market are providing excellent performance for a wide range of delicate synthetic fabrics, from polyester to polyamide with high content of elastane,” says FONG’S Europe Director of Sales and Marketing Richard Fander. “Heat-setting can often can be avoided, which improves the handle of the material and saves costs and the lengthwise-elongation of the fabric being treated is lower than on winch-driven machines.”

On April 11^th, 2019, the 9 Partner Institutes of the AZL opened the doors of their machinery halls and research labs to provide an extensive and on-site insight into the research and development capaci-ties in the field of lightweight production and composites at the RWTH Aachen Campus. As a special highlight of this year, the AZL presented the "iComposite 4.0" self-optimizing process chain: fiber-spraying - dry fiber placement - adaptive RTM as well as AZL´s new prototype machine development "Ultra-Fast Consolidator Machine" for highly productive and flexible processing of thermoplastic tapes with in-situ consolidation (winner of the JEC World Innovation Award 2019).

More than 100 Participants from external companies as well as from the AZL Network had the possibility to experience updates on the latest lightweight production technologies and equipment, get to know the bene-fital infrastructure on the Campus and network with internationally represented companies of the entire light-weight value chain researches by taking part in five guided tours to the lightweight institutes.

The AZL brought together content in the field of textiles (ITA), plastics and composite materials (IKV), pro-duction technology (WZL, IPT, ILT, and ISF), quality assurance and production-integrated measurement technology (WZL), lightweight design (SLA), automotive production (IKA) as well as multi-material systems and process integration (AZL).

Once a year at the Open Day, the AZL offers an exclusive and widespread unique insight into the R&D capacities of the institutes in the field of lightweight and composite technologies on the campus of RWTH Aachen University. Within walking distance, researchers and students from 9 institutes are working on the latest technologies for the cost-efficient development and production of lightweight components within one of the largest research landscapes in Europe. The research, closely involving industrial companies, covers the entire value chain from fiber production, materials and processing technology to quality assurance and com-ponent testing.

The innovative technology addresses the growing need for on-demand textile design and production

Kornit Digital, a global market leader in digital textile printing innovation, has announced the introduction of the new Kornit Presto, the only industrial single-step solution for direct-to-fabric printing. The Kornit Presto solution eliminates the need for pre and post treatment of fabric and allows for high-quality printing on a broad variety of fabric types and applications. The Kornit Presto does not consume water in the printing process, making it a environmentally friendly solution.

The new Kornit Presto comes with the NeoPigment Robusto, a Pigment-based ink. Implemented into the Kornit NeoPigmentTM process, the Robusto provides above industry standard wash and rub results and exceptional color fastness across a wide fabric and application range. The Robusto enjoys faster physical and chemical bonding characteristics, enabling a significantly shorter curing time, while providing quality and a wide color gamut.

The Kornit Presto solution suits a wide range of business and application needs in a variety of industry segments, including fast growing segments within the on-demand fashion and home décor markets. It is a highly productive solution, available in multiple configurations and able to print 450 square meters per hour.

Gart Davis, CEO at Spoonflower, the world’s first web-based service for custom, on-demand fabric and design creation and a long-time Kornit customer, commented, “We were thrilled to be able to test the new system and found the Presto to be in a class by itself; it prints beautifully on all kinds of fabrics, in a single-step, with an environmentally friendly dry process, and now at a multiple of productivity.  Our partnership with Kornit continues to be fundamental to our mission to make custom fabric accessible to designers, creative individuals and small businesses all over the world. We can’t wait to get going.”

• New game-changing Kornit NeoPoly Technology with industry-first innovation for industrial polyester printing that prevents dye migration.
• New Kornit Avalanche Poly Pro system unveiled at events during April, commercially available immediately.

Kornit Digital Ltd. (NASDAQ: KRNT), a global market leader in digital textile printing innovation, unveiled the game-changing Kornit NeoPoly Technology, which is the industry’s first digital, industrial process for high-quality printing on polyester.

Polyester is the second largest category in the overall T-shirt market, it is key in the sport segment, and is growing in the athleisure and functional apparel segments. Currently polyester is printed predominantly by analog solutions, which creates major technological, cost and sustainability challenges.  

The new ground-breaking Kornit NeoPoly Technology addresses these challenges with a new process and ink set implemented in the renowned Kornit NeoPigmentTM process. Kornit’s new process handles polyester applications without compromising on design, run size, substrate or labor.

The breakthrough technological innovation is achieved by an innovative ink set and a physical and chemical process specifically developed for low temperature curing, and polyester enhancing functionalities developed to maintain fabric characteristics and provide superior fastness. This unique process prevents dye migration on polyester.  The inks are Oeko-Tex and Eco-Passport certified and do not contain PVCs or other toxic ingredients.

The first system equipped with the Kornit NeoPoly Technology is the new Kornit Avalanche Poly Pro, a member of Kornit’s world-class reliable, highly productive industrial platform. The single-step Poly Pro is the perfect system for the industry, enabling easy and cost effective short-runs and on-demand printing on polyester garments.

• Techtextil 2019: Schoeller bringt die neue Ausrüstungstechnologie NanoSphere® Plus auf den Markt.

Das Besondere an der neuen Entwicklung: Sie schützt nicht nur vor Fingerabdrücken und fettigen Rückständen – sondern Textilien lassen sich auch bei Verschmutzung durch bloßes Wegwischen schnell und leicht reinigen.

Jeder Mensch hinterlässt Spuren. Vor allem auf Gegenständen des täglichen Gebrauchs, die regelmäßig in die Hände genommen werden. Speziell auf textilen Oberflächen hinterlassen Hand- und Fingerabdrücke in Verbindung mit Staub- und Schmutzpartikeln oft einen unerwünschten fettigen Schmutzfilm, der sich nur schwer entfernen lässt.

Die neue Ausrüstung von Schoeller Technologies AG, dem Technologiebereich der Schoeller Textil AG, heißt NanoSphere® Plus und funktioniert auf Basis einer Wirkungskette: Textilien werden mit einer Matrixausrüstung versehen, sodass der Kapillareffekt in der textilen Faser vermindert wird. Unangenehme Talg-Rückstände und Verschmutzungen, die über Finger und Hände abgegeben werden, bleiben weniger haften und lassen sich durch einfaches Wegwischen fast vollständig entfernen.

Neben dem Schutz gegen Finger- und Handabdrücke sind Textilien mit NanoSphere Plus zusätzlich auch noch wasser- und ölabweisend sowie extrem widerstandsfähig und abriebfest. Beim Einsatz der Technologie werden Haptik und Optik des Materials kaum beeinflusst.

Vorteilhaft ist diese Ausrüstung insbesondere bei Textilien, die oft berührt werden oder im direkten Kontakt mit der Haut sind und kaum oder gar nicht gewaschen werden. NanoSphere® Plus kann daher optimal auf Gewebe oder Kunstleder bzw. Wildleder-Ersatzprodukten für Taschen, Hüllen elektronischer Geräte, Kopfhörer, Lautsprecher oder Gegenstände im Bereich der Innenausstattung eingesetzt werden.

• Textile Intelligenz made in Germany – Messehighlight: zukunftsweisender Cabrioverdeckstoff

Von intelligenten Geweben für Automotive, Aircraft und Rail, über Absorber bis hin zu Outdoor-Textilien: Schmitz Textiles, Tochtergesellschaft der Schmitz-Werke GmbH + Co. KG, präsentiert auf der Techtextil und Texprocess 2019 umfassende textile Kompetenz. Diese zeigt sich in den Produkten der drei Marken mobiltex, drapilux und swela.

Der Spezialist für die textile Ausstattung in den Bereichen Automobil, Nutzfahrzeuge, Eisenbahn, Luftfahrt, Industrie und Verkehr mobiltex stellt erstmals auf der Messe einen völlig neuen Cabrioverdeckstoff vor. Ebenfalls in dieser Form neu auf dem Markt sind die textilen akustischen Lösungen von drapilux. swela, eine der führenden Marken für Sonnenschutz-Textilien, Outdoor-Bezugsstoffe und maritime Stoffe, zeigt fünf Innovationen in großer Farbauswahl. Besonderheit der qualitativ hochwertigen Textilien aller drei Marken sind ihre mechanischen und intelligenten Funktionen sowie ihre Schutzeigenschaften.

Highlight ist ein völlig neuer Cabrioverdeckstoff: mobiltex 388. Das Produkt hat signifikant weniger „White Marks“, Knickfalten, Krähenfüße, Fadenverschiebungen und Einfallstellen als vergleichbare Stoffe. Die Entwicklung individueller Varianten und Produktion erfolgen – wie auch bei den anderen Marken des Unternehmens – am Standort Emsdetten. Hier können auch kleinere Mengen für Sondereditionen hergestellt werden. Das schafft Designvielfalt.

Die Techtextil und die Texprocess finden vom 14. bis 17. Mai 2019 in Frankfurt am Main statt. Schmitz Textiles ist in Halle 3.0/G67 zu finden.