From the Sector

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

For wide-format flexo corrugated box printing, Baldwin’s AMS Spectral UV has engineered CorruCure™, a new generation of LEDUV technology that offers more than a 60% reduction in power consumption in an ultra-compact UV lamp head. This revolutionary solid-state curing system, designed specifically for corrugated LED printing, emits almost no heat or ozone, and accommodates width-switching. It also enables the curing of high-value decorative solutions, such as full-gloss, spot and matte coating effects on a variety of corrugated substrates, making it the ideal addition for product enhancement.

Lastly, Baldwin’s FlexoDry2™ infrared dryer, developed for corrugated flexo printing presses, utilizes patented Diamond IR lamps capable of reducing energy consumption by up to 30%, when compared to traditional IR dryers with aluminum or gold reflectors. Dramatically improved drying enhances color definition, and reduces or eliminates marking, while allowing full-speed printing. The system offers an optional integrated hot-air knife with temperature control to provide better surface drying. Taking safety into consideration, the FlexoDry2 comes with an integrated safety light curtain as standard and an optional camera vision system.

• Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

"GRAFE fits perfectly into our product portfolio," says Thomas Weigl, co-owner and responsible for business development at the Swiss distribution company, whose employees recently underwent intensive training in Blankenhain. "Our customers come from the sports goods, housing technology, automotive supplier and medical technology sectors - there are many synergies with GRAFE." Weigl himself has extensive experience in the masterbatch sector and has worked for two companies in the industry - Sukano and Americhem - as managing director. "Swiss companies want Swiss contact persons. We speak the languages German, Italian and French, are on site in the shortest possible time, offer direct contact and understand the needs of the customers and the requirements of the market," he explains. "Polynova is thus faster, closer and more direct." "The Swiss market is large and important for us," reports Theuerkauf and Weigl explains the background: "There are over 300 plastics processors, many are family-run and very technically oriented. The origins of the companies are often in the watch industry and in the production of the smallest precision parts such as gear wheels. In addition, coffee machine manufacturers, medical technology providers and automotive suppliers are important market players. A large number of well-known OEMs are located here."

Even though there are already masterbatch manufacturers in the Alpine country, says the sales expert, no one has the know-how to adjust compounds and masterbatches as perfectly and precisely as the company from Thuringia. In addition to a complete range of colours on practically all plastic substrates, flame retardants, UV additives, thermal stabilisers or lubricants are further examples of the extensive product portfolio. GRAFE is one of the specialists in the modification of thermoplastics and is an innovation driver in the production of colour masterbatches. "The technical possibilities in terms of a state-of-the-art technical centre and production machinery, as well as one of the largest research and development departments in the industry, are also not to be found elsewhere on the Swiss market. Our task now is to bring these to the attention of domestic customers," says Thomas Weigl, co-owner of Polynova AG together with founder Renato R. Huebscher.

• Composites in the construction industry - The lightweight construction material of the future

Building with fibre-reinforced materials opens up completely new possibilities. In terms of engineering, design, and organisation. This is due, on the one hand, to the excellent properties of fibre-reinforced materials (FRM) and, on the other hand, to the fact that the material – unlike wood or brick, for example – is not machined or processed for its use, but custom-produced.

Excellent properties – in terms of engineering, design, and organisation
Fibre-composite materials offer a whole range of technical properties for innovative and sustainable building:
•    High mechanical rigidity
•    Low weight
•    High corrosion resistance
•    Low material fatigue
•    Low heat transfer coefficient of the plastic matrix
•    Resistance to frost and de-icing salt
•    Good draping capability

In addition, fibre composites offer numerous design options for novel and exceptional new building and maintenance projects:
•    Unique variety of shapes
•    Different structures of the textiles
•    Large spectrum of colours and colour combinations
•    Translucency of the plastic matrix
Thanks to these properties, composites can be used to produce coloured, phosphorescent, thermochromic or – through the use of LEDs or light-conducting fibres permanently integrated into the matrix – luminescent components.

In addition, there are organisational benefits for planning, construction and maintenance work with fibre-reinforced materials:
•    Easier handling and assembly of the far lighter and more flexible components – compared with steel, concrete or wood
•    Faster installation
•    Shorter construction site times in road and bridge maintenance
•    Shorter delivery times
•    Ability to integrate electronic monitoring systems

Individual composite textiles – for every lightweight engineering project
The composites experts at vombaur develop and manufacture woven tapes and seamless round or shaped woven textiles from carbon, glass, flax or other high-performance fibres on special weaving lines for individually specified round and shaped woven textiles – and can therefore offer you the best possible fibre base for every lightweight construction project.

"Regardless of whether it's a new construction or a renovation project, a façade design, a bridge or a staircase – as your development partner for composite textiles, we have plenty of experience with composites for demanding tasks," emphasises Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "We develop, create samples and manufacture woven tapes and seamless round or shaped woven textiles – in collaboration with the customer enterprise development teams and individually for the respective projects." This is how novel and unique lightweight components made of high-performance textiles are created for visionary projects.

Stark steigende Baustoffpreise, immer knapper werdende Rohstoffe sowie steigende Preise für CO2-Zertifkate und Strom erhöhen den Druck, klimafreundliche und doch wettbewerbsfähige Produkte zu verwenden und innovative Produkte, Verfahren und Prozesse dafür zu entwickeln.

Für diese Herausforderungen im Bauwesen bietet der Leichtbau mit Faserverbundwerkstoffen neue Lösungen und ein enormes Anwendungspotential. Bisher sind diese Werkstoffe im Bauwesen noch nicht in ausreichendem Umfang etabliert und bei vielen Entscheidern noch nicht Teil der Lösung. Deshalb treibt das Fachnetzwerk CU Bau des Composites United e.V. (CU) als nationale und internationale Plattform dieses Thema für seine Mitglieder aus Industrie und Wissenschaft voran.

Hybride Bauweisen
Roy Thyroff, im Netzwerk Composites United e.V. Geschäftsführer CU Bau: „Unser Ziel ist, dass die gesamte Bauwirtschaft – Architekten, Planer, Bauingenieure, Zulassungsstellen sowie Bauunternehmen – Bauprodukte mit faserverstärkter Beton- und Polymermatrix mit entsprechenden Zulassungen einsetzen kann.“ Dabei geht es nicht nur um Bauweisen mit faserverstärkten Kunststoffen und textilbewehrtem Beton, sondern darüber hinaus auch um hybride Bauweisen, wie z.B. Hybridbauwerke aus Holz und Carbonbeton. Denn faserbasierter, hybrider Leichtbau führt die besten Eigenschaften verschiedener Materialien klimafreundlich zusammen, bietet somit gegenüber herkömmlichen Baustoffen große Vorteile für den Klimaschutz und ermöglicht völlig neue Bauweisen.

Vorteile von Faserverbundwerkstoffen
Faserverbundwerkstoffe sind sowohl im Neubau als auch in der Sanierung dank ihrer umwelt- und ressourcenschonenden Eigenschaften im Vorteil. Neben der CO2-Reduktion liegen die wesentlichen Vorteil:

• in der Geschwindigkeit der Ausführung,
• dem geringeren Materialeinsatz,
• der Kostenreduktion,
• der Leistungsfähigkeit wie hoher Druck- und Biegezugfestigkeit,
• dem einfacheren Handling
• den geringeren Transportlasten,
• der Beständigkeit gegen Korrosion,
• der Flexibilität bei unterschiedlichen Schädigungsgraden eines Sanierungsfalls und
• der deutlich verlängerten Nutzungsdauer.

• Next-Gen Technologies for Nonwovens/Engineered Materials
• Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

• Sustainable Solutions for our Plastic Planet Predicament, by Marc A. Hillmyer, Ph.D., McKnight Presidential Endowed Chair, University of Minnesota;
• Closed-Loop Recycling Pilot of Single-Use Face Masks by Peter Dziezok, Ph.D., Director of Open Innovation, Proctor & Gamble;
• Innovating a Sustainable Future for Nonwovens: A European Perspective, by Matt Tipper, Ph.D., CEO, Nonwovens Innovation & Research Institute (NIRI);
• Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology, by Fabio Zampollo, CEO and Founder of Teknoweb Materials; 
• Guiding Environmentally Sustainable Innovations – From Reactive to Proactive Life Cycle Management, by Valentina Prado, Ph.D., Senior Sustainability Analyst, EarthShift Global LLC;  
• High-Loft, Ultra-Soft Hygiene Solutions, Paul E. Rollin, Ph.D., Senior Principal Scientist – Global Hygiene, Propylene-Vistamaxx-Adhesion (PVA) Global Technology, ExxonMobil Chemical Company;
• Canadian Plastic Policy Update, by Karyn M. Schmidt, Senior Director, Regulatory & Technical Affairs, American Chemistry Council (ACC).

Other highlights included the announcement of Canopy Respirator as the winner of this year’s RISE® Innovation Award winner. The annual award recognizes innovation in areas within and on the periphery of the nonwovens industry which use advanced science and engineering principles to develop unique or intricate solutions to problems and advance the usage of nonwovens.

RISE® Innovation Award Winner
The RISE® Innovation Award was presented to Canopy for their Canopy Respirator. The productis an innovative respirator that is fully mechanical, non-electrostatic, with a filter designed for superior breathability while offering the wearer facial transparency. The breakthrough respirator features 5.5mm water column resistance at 85 liters (3 cubic feet) per minute, 2-way filtration, and a pleated filter that contains over 500 square centimeters of surface area. The patented Canopy respirator resists fluids, and eliminates fogging of eyeglasses.

ISKO introduces ISKO RHEACT™ – a patented, cutting-edge garment manufacturing solution designed to improve everyday living and physical wellness for everyone, through the proven benefits of woven compression.

Building on the exponentially growing trend for wellbeing products in many consumer sectors, ISKO has leveraged its expertise in developing innovative technologies to create ISKO RHEACT, its own wellbeing product for the apparel industry. Available exclusively to ISKO’s trade partners, ISKO RHEACT is extremely versatile and suitable for use in a variety of consumer sectors, from lifestyle, to fitness and workwear.

ISKO RHEACT stands out for its woven, gradual compression technology that helps boost the energy of the wearer through improved blood flow. It also provides a micro massaging effect by varying pressure in different areas of a garment. ISKO RHEACT is superior to knit compression as it works for up to 12 hours (compared to 3 hours) for any type of lifestyle – whether it’s taking a long-haul flight, lounging at home or during or after a workout where it helps with warming up before exercise and improves post-workout recovery. From a consumer standpoint, this translates to a garment that wears like a second skin, is durable, works to focus the mind, sharpens the senses, and energizes the body.

ISKO RHEACT products are certified by the independent Hohenstein Institute (Bönnigheim, Germany) and have received the endorsement of many physicians for their health and wellbeing benefits. They are also acknowledged by the US Food and Drug Administration (FDA) as general wellness products as per section 513(g) of the FD&C Act.

Hexcel has collaborated with HP Composites S.p.A (HP Composites), a world leader in the production of carbon fiber components for automotive and motorsports, to develop carbon fiber Class A body panels. Hexcel HexPly® XF surfacing technology is being extensively used by the Italian component producer to manufacture external body panels and other components for supercars such as Alfa Romeo’s stunning new supersport sedans, the Giulia GTA, and GTAm.

With five production plants in Italy, HP Composites has built an impressive track record of high-performance composite successes on both road and racetrack. HP has combined this processing expertise with Hexcel HexPly® XF3 surfacing material, HexPly® M47, and HexPly® M49 prepregs, working to the highest standards set by the most prestigious supercar OEMs and leading motorsport teams.

Hexcel’s automotive composites portfolio is the result of decades of industry experience and the creation of strategic partnerships to develop and optimize leading-edge technologies. HexPly XF3 is an epoxy prepreg surface material, developed with processing input from the HP Composites team to address the challenges of producing high-quality Class A automotive body panel surfaces with excellent resistance to aging tests.

Applied as the first ply in the mold and after curing at 120-180˚C in an autoclave, HexPly XF3 produces a smooth part surface with no porosity, that requires minimal preparation for painting.

HexPly XF3 is supplied in an easy-to-handle roll format with good tack and drapability. After curing, it can be easily prepared for painting with a rapid sanding process. HP Composites has incorporated automated robotic sanding techniques for this finishing stage with the paint-ready HexPly XF3 surface providing excellent paint adhesion according to EN ISO 2409.

HP Composites typically uses autoclave processing for HexPly XF3 parts, maximizing weight savings and structural performance of the final components. In addition, HP has also developed its own proprietary press and compression molding processes, including Air Press Moulding® technology, compatible with HexPly XF3 and other HexPly prepregs for higher volume production series that require increased production rates.

“Our long-term experience has given us a detailed understanding of the critical features that influence how prepregs and surfacing technologies interact with different production processes,” said Abramo Levato, General Manager, HP Composites S.p.A. “The relationship we have with Hexcel is both highly technical and highly supportive. As a result we have a complete material package for high-quality Class A body panels that are formulated specifically with our requirements in mind.”

“Combining the expertise of HP with a strong technical interaction and collaborative dialogue, Hexcel and HP were together able to develop the optimum HexPly XF surfacing technology,” said Claude Despierres, VP Sales and Marketing, Hexcel. “With HexPly XF3 we satisfy the toughest industry standards.”

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

The Ambassador’s visit to Milliken included a tour of the company’s Magnolia plant in Blacksburg, S.C., and a roundtable discussion highlighting the important role women contribute to textiles, the critical need for policies supporting a domestic supply chain, and the significant impact of the sector to the U.S. economy. Milliken is one of the largest textile companies in the U.S., employing more than 6,000 associates domestically and an additional 1,350 associates globally. Milliken’s Textile Business alone employs 2,500 people across eight counties in South Carolina and is the fourth largest manufacturing employer in the Upstate.

On the second leg of her trip, Ambassador Tai visited American & Efird’s manufacturing facility in Mount Holly, N.C. American & Efird operates as part of Elevate Textiles and its global portfolio of advanced products and distinguished textile brands, including A&E, Burlington, Cone Denim, Gütermann and Safety Components, and representing more than 500 years of textile manufacturing knowledge.

During the visit, U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industry participated in a roundtable with the Ambassador at which they discussed the competitiveness of the domestic industry, outlined priority issues in Washington, such as the importance of the Western Hemisphere co-production chain and ways to jointly support domestic supply chains through Buy American and Berry Amendment policies that help onshore production, spur investment, maintain the safety and security of our armed forces and generate new jobs.

Outdoor Research, die in Seattle ansässige Firma für Funktionskleidung und Outdoor-Ausrüstung, bringt in diesem Herbst mit seinen RadiantX-Handschuhen und -Fäustlingen eine neue Linie auf den Markt und ist damit die erste Marke, die auf die HeiQ XReflex Radiant-Barrier-Technologie für Handschuhe setzt.

Bei HeiQ Reflex, das von HeiQs Joint-Venture-Partner Xefco entwickelt wurde, handelt es sich um eine patentierte Wärmebarriere-Technologie, mit der Produkte dünner, leichter und wärmer werden. HeiQ XReflex nutzt eine hauchdünne reflektierende Oberflächenbeschichtung, die energetische Infrarot-Körperwärmewellen auf den Körper zurückstrahlt. Diese sogenannte Radiant-Barrier-Beschichtung wird auf einer Seite des Gewebes mittels eines Hightech-Aufdampfverfahrens aufgebracht, das keinen negativen Einfluss auf die Luftdurchlässigkeit, die Geräuschentwicklung, die haptischen Eigenschaften, die dauerhaft wasserabweisende Wirkung (durable water repellence, DWR) oder die daunendichten Eigenschaften des Gewebes hat. Die Radiant-Barrier-Textilien werden mit optimierten Isolationsmaterialien kombiniert, sodass isolierende Kleidungsstücke mit bis zu 50 % weniger Volumen und Gewicht bei gleichbleibender Wärmeleistung (gemessen in CLO) entstehen. HeiQ XReflex ist erhältlich auf Geweben und Vliesstoffen und hat eine Haltbarkeit von über 20 Waschvorgängen.

Notus Composites (UAE), the award-winning producer of epoxy prepreg materials, announces the latest addition to its high-performance epoxy range with the launch of its new NE7 low temperature curing prepreg system. The Notus NE7 formulation allows composite manufacturers to cure components at temperatures as low as 70˚C, reducing energy consumption and enabling more cost-effective tooling options.

Notus Composites has developed the new NE7 prepreg systems for applications across the Marine, Architecture, Industrial and Wind Energy sectors, with the novel low temperature curing chemistry delivery significant cost benefits. Existing prepreg manufacturers can now use more cost-effective composite tooling, with new prepreg users able to switch easily from existing infusion or wet laminating processes without creating expensive new high temperature tooling.

NE7 prepregs can be cured at temperatures as low as 70˚C, with the standard cure cycle being 12 hours at 70˚C, matching the typical cycle time for an infused part with a component Tg of 85˚C. NE7 materials have a good outlife of 30 days at 20˚C and are available in all prepreg and Notus single sided N1-Preg formats with unidirectional, multiaxial, and woven reinforcements. NE7 can also be supplied as a resin film.

Notus has recently supplied NE7 low temperature prepregs to Dubai based Aeolos Composites for the production of their new Aeolos P30 racing yacht. The P30 is a futuristic new craft created by top German sailor and designer, Hans Genthe, with a super light carbon fibre construction and large sail area that promises spectacular on the water performance for a thirty foot yacht. Notus delivered a range NE7 prepregs for the build, including woven, multiaxial, and unidirectional carbon fibre reinforcements as well as adhesive films for core bonding.