From the Sector

Aachen - Warden Schijve, former Chief Scientist Composites at SABIC, recently joined the AZL engineering team in October. As Design Leader, he is further expanding the product and application development division of the service provider for business development and technology development in lightweight.

AZL Aachen GmbH supports companies along the entire value chain in implementing competitive lightweight technologies. "We develop component and production concepts for companies, including the analysis of costs and production-relevant KPIs. With our broad range of material and production technologies, we provide a comprehensive solution for the development and evaluation of products and identify the most suitable paths to implementation. Warden Schijve will use his many years of experience to support our partners in the efficient development, evaluation and implementation of component and production solutions through to market readiness," says Dr. Kai Fischer, Managing Partner of AZL Aachen GmbH.

From his 35 years in the composites industry with Fokker, DSM and SABIC, Warden Schijve brings a broad and deep expertise in structural design, plastics and composites, as well as processing technology.
Warden Schijve: “In my career I’ve always seen that it pays off to evaluate various different design concepts, which may use different materials or material combinations, to finally come to the most cost-competitive lightweight applications. Taking into account different manufacturing technologies right from the beginning can save a lot in later stages of component development. And this is what fascinates me about AZL and its eco-system: the available knowledge on a wide variation of process and production technologies, including cutting edge equipment, at both the AZL Tech Center, and the various institutes present in the total RWTH Aachen Campus.”

Dr. Michael Emonts, Managing Partner of AZL Aachen GmbH: "We are delighted that Warden Schijve, as a well-known face from the AZL community, will enrich us in developing lightweight applications, production systems and processes, identifying competitive technology optimizations through the analysis of markets and applications, and supporting our customers in the industrial implementation of the developed technologies."

Warden Schijve will also lead the project for a concept study for future battery casings based on composite-based multi-material systems. The AZL started the project in October together with 30 participating companies from the entire value chain to get an overview of existing component solutions, evaluate the advantages of a multi-material approach and develop a multi-material component design including a production concept for battery casings.

• The stunning niLuu collection by former professional volleyball player Nilufer Bracco features smart Bemberg™ fabrics by Ipeker
• Wonderful kimonos for women and men, sleep and face masks are the key pieces of the PETA certified and cruelty-free collection, 100% Bemberg™ and vegan

Former professional volleyball player Nilufer Bracco recently launched niLuu, a PETA approved cruelty-free loungewear brand using 100% Bemberg™ by Asahi Kasei that combines the iconic elegance of traditional silk with a socially and environmentally ethical production process.

Bemberg™ is a fiber made from the smart-tech transformation of cotton linters bio-utility materials that are converted through a traceable and transparent closed loop process; the Bemberg™ Ipeker Textile  fabric’s uniqueness comes from the exceptional quality characteristics achieved in design. The end result is a luxurious fabric so soft and smooth that it is almost like a second skin, breathes like cotton, drapes beautifully like silk, and reflects the cultural tradition of luxury textiles from founder Nilufer Bracco’s native country, Turkey. The first collection released by Miami based niLuu features premium quality kimono robes, sleep masks, face masks, and pillowcases that are available in a variety of deep and vibrant colors, and with a soft-brushed finish typical of premium sand-washed silk.

Designed to not only feel and look amazing but the entire niLuu collection is sustainable, biodegradable and 100% vegan.  Ipeker Textile, one of the major Bemberg™ fabric producers in Europe, proudly holds the title as the first vegan fabric producer in the world, receiving Vegan V-Label certificate on around 150 different products that adhere to the guidelines of the European Vegetarian Label, most of them developed with Bemberg™ yarn.

niLuu’s innovative Bemberg™ collection is hypoallergenic, antistatic, easy to care for, and it is also known to have several benefits for the skin. The breathability of the fabric helps to maintain body temperature; excellent moisture control means the fabric doesn’t dry out the skin or hair in the ways that cotton would and minimal friction against the skin means it is also known to have anti-aging benefits.  Speaking of niLuu’s high-quality Bemberg™ fabric, Founder, Nilufer Bracco adds, “Our innovative Bemberg™ vegan silk delivers the best of both worlds. Not only does our luxury fabric feel amazing when you use it, but you can also feel good knowing that it caused minimum harm to the planet when it was produced and that it will leave only the slightest trace when it reaches the end of its lifecycle.”

The luxury textiles brand has also shown its commitment to responsible practices, by partnering with 1% for the Planet pledging to donate 1% of their annual revenue to environmental organizations that work hard to protect our planet.

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Carbon dioxide-based fibre for climate protection and interdisciplinary training with novel Smart Textiles test rig

The Wilhelm-Lorch-Stiftung, based in Frankfurt am Main, Germany, honours a project of the Institut für Textiltechnik of RWTH Aachen University, short ITA, and awards a sponsorship prize to the ITA graduate Ricarda Wissel on 25 June 2020. She is awarded for her outstanding bachelor thesis " Implementation of elastic yarns made from carbon dioxide based thermoplastic polyurethane in socks " with funding for a subject-specific continuation of her education. The ITA receives the project sponsorship prize for the project "Smart Textiles - an interdisciplinary training course to promote young scientists in future technologies", which was submitted to the Wilhelm-Lorch-Stiftung by ITA´s PhD candidate Simon Kammler.

Carbon dioxide-based fibre from industrial waste contributes to climate protection

ITA scientist Dr.-Ing. Pavan Manvi has developed a melt spinning process at ITA for the production of elastic yarn from thermoplastic polyurethane, in which carbon dioxide is used as one of the raw materials. In her bachelor thesis, Ricarda Wissel successfully developed a process chain for the CO2-based yarn in a textile end product for the first time. In cooperation with the company FALKE and Dr Manvi, who supervised Ms. Wissel's work, the yarn was used to produce a sock (see figure "FALKE sock with carbon dioxide filaments").

By reusing carbon dioxide from industrial waste as a raw material for textile and clothing products, the carbon dioxide balance can be improved and thus contributes directly to climate protection. The sponsorship prize of the Wilhelm-Lorch-Stiftung is endowed with 6,000 € for the specialist further training of Ms. Wissel.

Interdisciplinary training with development of a new type of measuring stand for the future-oriented research field "Smart Textiles

The development of textiles with additional digital functions, so-called "Smart Textiles", is considered a future-oriented field of research. In his project submission, ITA´s doctoral candidate Simon Kammler presented a concept for a lecture series on Smart Textiles at ITA and develops a new type of measuring stand for measuring the capacity and conductivity of fibres. The project is funded by the Wilhelm-Lorch-Stiftung with a prize money of 10,000 Euro.

Smart Textiles enable the textile to interact with the environment and the human user. Today they are therefore in demand in many areas of everyday life such as sport, health, living, life and mobility and offer completely new practical solutions. In combination with digital networked services, Smart Textiles promise support and innovation in almost all situations of daily life.

With the conception of a new lecture series, Mr. Simon Kammler is supporting ITA in its goal of providing the best possible training for young scientists. The focus is on imparting far-reaching interdisciplinary skills in order to master the challenges of current fields of research.

Background:

The Wilhelm-Lorch-Stiftung supports particularly talented young people from all areas of the textile industry. Its purpose is the promotion of subject-specific education and further education as well as the promotion of projects at universities, academic schools and vocational schools, which are characterised by the sustainable communication of innovative learning content in science and research. In total, thirteen sponsorship prizes were awarded in 2020. Due to the Corona crisis, the forum of TextilWirtschaft, which is normally the venue for the awards ceremony, unfortunately had to be cancelled in 2020.

Brown Wrote to President Outlining Critical Steps White House can Take Now to Address Shortage of Personal Protective Equipment

 U.S. Sen. Sherrod Brown (D-OH) hosted a news conference call to discuss his plan for addressing the shortage of personal protective equipment (PPE) needed by healthcare workers on the frontline of keeping Americans healthy and safe during the coronavirus pandemic.

This weekend, Brown wrote to President Trump outlining several steps the Administration should take immediately to address the shortage and ramp up manufacturing of these critical medical supplies.

In his plan and in his letter to the President, Brown lists nine steps the Administration could take immediately, including:

1. Designate a government official who can serve as a point person responsible for coordination the acquisition and development of PPE, medical devices, and other supplies necessary to fight the coronavirus pandemic. 
2. Establish a PPE and medical device assessment and database to monitor the supply and anticipated needs for PPE, ventilators, diagnostic test kits, and other needed medical supplies to respond to the coronavirus pandemic. 
3. Publish a list of PPE, medical device, and general medical supply needs to respond to the coronavirus pandemic. 
4. Establish a hotline capable of handling significant call capacity that will provide U.S. producers centralized information about the results of the national assessment and the current need for PPE, devices, and other health care supplies. 
5. Provide immediate funding to manufacturers to purchase equipment, retool machinery, hire additional workers, and cover any other expenses needed to increase production of PPE and necessary medical devices and supplies.
6. Streamline contract and certification procedures to ensure production and delivery of materials are not delayed due to paperwork constraints.
7. Provide critical protections for workers who are making PPE, medical devices, and necessary supplies to receive a waiver from any shelter-in-place requirements to allow workers to volunteer to go to work in these critical industries. 
8. Provide purchase guarantees and delivery assistance of product to the communities and health care facilities that need the products most. 
9. Support companies that have the capacity to sterilize reusable equipment to alleviate the existing PPE shortage. 

In his plan, Brown also pointed out important legislative actions that will help ramp up production of these critical supplies, including expanding the strategic national stockpile authority, substantially increasing Defense Production Act funding and strengthening domestic preferences.

Lenzing expands its Management Board, naming a new CTO and an additional Management Board member for “Pulp and Wood Raw Materials”

The Supervisory Board of Lenzing AG, the world’s leading producer of botanic cellulose fibers, has appointed two new members to the company’s Management Board. Stephan Sielaff will serve as the new Chief Technology Officer effective March 1, 2020, succeeding Heiko Arnold, who left the Lenzing Group in November 2019. At the same time, Lenzing’s highest management body led by Chairman Stefan Doboczky will be expanded to include a newly created Management Board position for “Pulp and Wood Raw Materials” and will thus consist of five members instead of four. Christian Skilich will assume the position of Member of the Management Board for Pulp and Wood Raw Materials as at June 1, 2020.

“In the coming years our focus will be on achieving the strategic target of strongly increasing our own supply of pulp in line with our corporate strategy sCore TEN. By creating this new division, the composition of the Management Board now also reflects this focus”, says Peter Edelmann, Chairman of the Supervisory Board of Lenzing AG.

Stephan Sielaff is a chemical engineer who gained experience in the chemical industry in the years 1993 to 2014, holding various management positions for Unilever and Symrise. Since 2014, he has worked for the Swiss specialty chemicals company Archroma, an important supplier of the textile and paper industry, as a Member of the Board of Directors and Chief Operating Officer (COO).He has been responsible for forming the integrated operational structure and the strategic development of the company.

Christian Skilich, who will assume management responsibility for the new Pulp and Wood Raw Materials Division in the Lenzing Group, boasts outstanding expertise in the field of paper and pulp technology. With a Master of Science in Paper Technology and Engineering & Economics, he first held various positions in the paper, packaging and glass industries. Since 2004, he has worked in a broad range of management areas on behalf of the internationally operating Mondi Group. Christian Skilich most recently served as Chief Operating Officer on Mondi’s Board of Directors, overseeing projects in the USA and Europe.

• Acquisition drives market growth
• Additional sales channel for BASF customers and partners
• Access to new materials and technologies for customers of BASF and Sculpteo

To continue to expand its position as a leading service provider in the additive manufacturing sector, BASF New Business GmbH has formally agreed to acquire the online 3D printing service provider Sculpteo. The agreement was signed on November 14, 2019 and is expected to become effective in the next few weeks pending regulatory approval by the relevant authorities. The acquisition of the French 3D printing specialist based in Paris and San Francisco will enable BASF 3D Printing Solutions GmbH, a wholly-owned subsidiary of BASF New Business GmbH, to market and establish new industrial 3D printing materials more quickly. Sculpteo’s management team fully supports the acquisition and will remain in place to provide customers and partners with this expanded service spectrum.

For around a decade already, Sculpteo has operated an online platform with integrated production for the manufacturing of prototypes, individual objects, and serial production components with a range of different additive manufacturing technologies. Customers in various industrial sectors around the world use the Sculpteo service to produce new components rapidly and reliably.

BASF will develop the existing Sculpteo 3D printing platform further into a global network. For customers and partners, BASF 3D Printing Solutions will thus be able to offer an additional channel for marketing their services and expanding their own customer bases.

"Through the acquisition of Sculpteo, we can provide customers and partners with even faster access to our innovative 3D printing solutions. In addition, our customers will benefit from an extended range of services”, explains Dr. Dietmar Bender, Managing Director BASF 3D Printing Solutions. “Together with Sculpteo, we are pursuing our goal of establishing additive manufacturing as a proven technology for industrial mass production", says Bender.

Combining the strengths of both companies will provide Sculpteo's existing customers with access to a more extensive portfolio of 3D printing materials. "We are excited to join the BASF team and thus benefit from BASF’s outstanding R&D to provide our customers with innovative solutions”, says Clément Moreau, CEO and Co-Founder of Sculpteo. Moreau will stay with Sculpteo as CEO.

Beyond this, the Sculpteo Design Studio and BASF’s technical experts will collaborate to be able to support customers in their 3D printing projects from the early planning phase right through to the final printed part. This will enable BASF to offer its customers end-to-end industrial 3D printing solutions.

Artisan craft, experience and high eco-technological specialization: the great tradition of fabrics for shirts which styles the future.

Search for quality, the ability to interpret elegance and a product inspired by tradition, though always trendy: these are the distinctive traits which define the vocation of Canclini 1925, a point of reference worldwide for shirt fabric manufacturing. This expertise is implemented through dynamic creativity and 100% Made in Italy artisan  craft. These are the foundations which make the history and capability of Canclini 1925 unique, as standard bearer for everlasting style.

All this results from an authentic family tradition which, for three generations, has been the driving force of the company, shaping each collection. This passion is at the service of tireless search in terms of style and technology which underlies the whole Canclini 1925 innovative approach. The goal is to offer, through its fabrics, an inimitable experience, “creating wellbeing” and emotion through touch alone, respecting the environment and humans.

Founded in 1925, Canclini has always been a company able to combine extraordinary creativity and product care, established as a silk factory in the Como region. This tradition was renewed in the 1960s with the shift to the cotton sector, aiming more and more at customer service, developing a partnership and trust relation. Working with Canclini 1925 means reaching into the tradition of a family which has always been passionate about its work, dynamic, creative and focused on continuous innovation.

These are distinctive and qualifying elements in the Canclini 1925 approach. An approach which, in line with the research and development pathway on which the company has always invested substantial resources, also involves considerable attention the topic of environmental and social accountability. This commitment is confirmed by numerous and prestigious certifications in the company portfolio, starting from the careful selection of raw materials to its social commitment. More specifically, Canclini 1925 has been awarded the GOTS (Global Organic Textile Standard), SUPIMA COTTON (the Pima “Gossypium Barbadense” cotton, classified as Extra-long Staple) certifications, following the Standard 100 by OECO-TEX®, BCI (Better Cotton Initiative) and GRS (Global Recycle Standard). A comprehensive range of tools which, combined with its in-house know-how and expertise capital, enhances the portfolio of Canclini 1925 branded innovations.

This accountability approach also encompasses the social area with the association “Un sorriso in più” (“One extra smile”). Founded and managed by the company, it is a non-profit organisation engaged in projects which include assistance in nursing homes to elderly persons without family ties, as well as in the support to children living difficult and disadvantaged family situations, focusing its activity on “human life quality”. The uniqueness generated by this meeting between tradition and innovation is the driving force behind corporate research, as well as the truly distinctive reason for its style and technology development. The high-performance looms and technologies used make the company strong and flexible enough for contemporary market requirements. The trademark passion of the Canclini family completes the picture within which the company operates, true to an approach which is at the same time artisan and high-tech, a point of reference in Italy and worldwide.

Thanks to its substantial manufacturing capacity, Canclini today is present on all of the most influential shirt markets worldwide, and – with its new Blue 1925 line - also in the denim world. In this way the company has succeeded in positioning itself among major players in textile manufacturing, authentically Italian because of its farsighted  business vision, care for details and production flexibility. It is the approach which – over the years - has allowed the group to take over important enterprises in the sector, for example Hausmann-Moos and Profilo Tessile, Maglificio Mida and Grandi & Rubinelli.
According to Simone Canclini, CEO of Canclini 1925: “What characterises the Canclini 1925 spirit is first and foremost genuine passion driven by our inspiring principles: quality, style and service. These elements have allowed us to become and remain a point of reference worldwide, to rediscover the everyday – basic and exciting – emotion of choosing a special shirt”.

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

• STOP TALKING. START ACTING.
• Climate change is real. And so is the responsibility of every human being to help in reducing waste.

We no longer want to talk about sustainability, we want to act. For January, PREMIUM is partnering with Spanish fashion label and sustainable clothing pioneer ECOALF. The brand will present its lifelong mission and latest collection in a dedicated space as well as an art installation together with conceptual artist Juan Garaizabal.

"2019 is all about digital first and an active debate about social and environmental issues. Transparency and sustainability are key words. By reducing plastic waste on all our shows, teaming up with ECOALF and giving this wonderful brand dedicated space and time for spreading their message, we are taking steps into right direction. Every little action counts. We should talk about the things we do more instead of talking about what we are not doing. We all need to wake up. Now.” – Anita Tillmann, CEO PREMIUM Group

ECOALF creates high-quality garments using recycled materials collected from the bottom of our oceans. Commitment, sustainability and innovation are at the core of everything the company does, resulting in both conscious and stylish urban, adventure, knitwear and activewear pieces.   
 
“I love collaborating with people that also believe we have the opportunity to change the world for the better. It’s no longer about what you do, but how you do it. It is important to stand up for what you believe in, because fashion cannot just be about looking good.” – Javier Goyeneche, President and Founder of ECOALF. 

On Wednesday, January 16th, at 10am and 2pm, Goyeneche will present his brand’s values, philosophy and way of working on the experience floor of SHOW&ORDER X PREMIUM at Kühlhaus, right next to the STATION area. Show visitors, media and other exhibitors are invited to listen, learn and discuss.   
 
The art piece in partnership with Garaizabal unveiled at PREMIUM on January 15th is filled with waste to portray our everyday reality, and purposefully interactive so that visitors can throw their own trash inside the installation. The aim is to educate about correct waste disposal and show that every individual’s decision matters: Stop, Think, Act.