From the Sector

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.

National Council of Textile Organizations (NCTO) Chairman David Poston delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 19th Annual Meeting on March 30.

Mr. Poston’s speech highlighted the impacts of macroeconomic factors on the U.S. textile industry and the resilience of the U.S. textile industry; trade and investment data showing growth in the sector across the board; and NCTO’s policy priorities for domestic textile manufacturers.

“The U.S. textile and apparel industry faced challenging macroeconomic conditions throughout the year,” Poston states in the speech. “Despite these challenges, there were also many positive trends that helped offset some of those pressures, including softening inflation towards the latter half of the year, coupled with a surge in onshoring and nearshoring that led to historic investments, commitments and expansion in the U.S. and the Western Hemisphere.”

Click here for his full remarks.

The fourth quarter 2022 textile machinery orders index, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp 35% decline compared to the period from October to December 2021. In absolute value, the index stood at 83.6 points (basis: 2015=100).

Orders took a 34% drop on the domestic market, while the foreign index was down fully 37%. In Italy, the index’s absolute value came in at 155.4 points, whereas on foreign markets the value stood at 75.8 points.

On annual basis, the orders index marked an 18% decrease and an absolute value of 110.4 points. The drop in orders abroad was 17%, while orders collected in Italy were 28% lower than the figures drawn up in 2021.

ACIMIT president Alessandro Zucchi stated that, “The orders index data for the fourth quarter confirms what had already been observed in the previous quarters in 2022. After a sharp increase in 2021, this decrease in orders for the past year is physiological. Furthermore, the ongoing war between Russia and Ukraine, with its related consequences on daily business and trade, and a macroeconomic framework in which uncertainty prevails, have further negatively affected the orders intake.”

Data for the last quarter does not suggest a reverse in the negative trend for the first months of 2023. Declining energy prices and inflation, although still high, also declining slightly are, however, signs of a light improvement in the business of companies in the sector as well. “We need to look to the current year with optimism,” continued ACIMIT president. “Our member companies are already focusing on ITMA, the upcoming global textile machinery industry trade fair, that will be held from June 8-14 in Milan.” “I am confident that ITMA Milan can represent an opportunity for further development of the Italian textile machinery sector,” concluded Zucchi. “The technological innovations that our manufacturers will bring to the trade show will meet the textile industry’s need to be increasingly sustainable, both environmentally and economically.”

Price Trends

• The nearby cotton futures contract on the Intercontinental Exchange was down just 1% in December and closed the year at $1.84 per kilogram. A year earlier, the March contract closed at $2.30 per kilogram.  
  
  Cotton futures have been inverted for nearly three years because of supply chain disruptions that prevented normal on-time deliveries of international shipments. With the easing of container shortages and increased sailings, cotton futures are gradually reverting to the normal pattern in which contracts for forward delivery exceed nearby contracts by the cost of insurance, storage and interest between delivery months. The May and July 2023 contracts also finished 2022 at $1.84 per kilogram. In November, the May and July contracts were each several cents per kilogram lower than the March contract.
• The Eastern Market Indicator of prices for fine wool in Australia rose 9% in December to US$9.06 per kilogram. A year earlier, the EMI was $9.66. Australian analysts note that sheep for meat, cattle, and grain production, are competing alternatives for the use of land, and wool prices must continue upward if production is to be maintained in 2023.
• Prices quoted by the Indian Jute Balers Association (JBA) at the end of December converted to US$ fell 2% from a month earlier to an average of 74 cents per kilogram. The decline occurred entirely because of a weakening exchange rate. Prices in Rupee rose marginally. A year earlier, quoted prices averaged 84 cents per kilogram. The 16-percent decline year-on-year was caused about equally by a decline in quoted prices in Rupee and a weakening of the exchange rate.  
  
  The Indian jute industry is almost entirely focused on domestic demand, while half of total demand in Bangladesh comes from exports. Because of shortages of higher quality jute, export prices in Bangladesh are reportedly rising.
  (https://www.wgc.de/en/produkte/jute)
  
  India extended the anti-dumping duty at the end of December on jute and jute products imported from Bangladesh and Nepal for a period of five years. Bangladesh had urged the Indian government not to accept recommendations for extension, while the Indian industry was lobbying to ensure the duty remained in place. The duty rates range from approximately $6 per tonne at current exchange rates for low-quality fibres to $350 per tonne for finished products. The duty was originally imposed in January 2017 and was to expire at the end of 2022.
• Prices of silk in China rose 2% during December to US$28.0 per kilogram. Prices in yuan fell marginally during the month, but the RMB rose 3% against the USD. Prices of textile-grade silk in China were essentially unchanged at the end of 2022 compared with the end of 2021. However, prices closed 2022 about 40% above the average level pre-Covid. https://www.sunsirs.com/uk/prodetail-322.html and  https://businessanalytiq.com/procurementanalytics/index/raw-silk-price-index/ .
• Coconut coir fibre in India quoted in US$ remained in a narrow range, averaging $0.205 per kilogram in December. Prices in Rupee have been stable, and changes in dollar prices reflect changes in the exchange rate.

 
Production
 
World Natural Fibre Production in 2022 is estimated as of early January at 32 million tonnes, approximately one million below production in 2021 and down 900,000 tonnes compared with the estimate in early December.

World cotton production is estimated at 24.2 million tonnes in 2022/23 (August to July), 700,000 tonnes lower than in 2021/22 (ICAC.org). World cotton production rose from 20 million tonnes to 25 million between 2020/21 and 2005/06, but there has been no growth in the nearly two decades since.  
 
World production of jute is forecast down nearly 400,000 tonnes in 2022 because of inadequate rainfall during the harvest period to permit proper retting. Production in India is estimated up by 100,000 tonnes to 1.7 million tonnes, but production in Bangladesh fell by nearly one-third to just one million tonnes.
 
Production of coir, flax and sisal in 2022 are each estimated based on recent trends. Coir and flax have each been trending upward over the past decade, while world sisal production has been largely stable.

World wool production is forecast up 5% in 2022 to 1.09 million tonnes (clean), the highest since 2018. The Australian Wool Production Forecasting Committee issued its third estimate of 2022/23 production in December, keeping the estimate unchanged from September. Above-average rainfall in Australia, and across most of the Southern Hemisphere, is resulting in better pasture conditions and a rebuilding of sheep numbers. Sheep numbers shorn in Australia are climbing from 67 million in 2020/21 to 72 million in 2021/22 and to an estimated 75 million in 2022/23. https://www.wool.com/market-intelligence/wool-production-forecasts/  
 
According to the International Sericulture Commission (https://www.inserco.org/), silk production in China dropped from 170,000 tonnes in 2015 to 53,000 in 2020, with further declines estimated during Covid. Consequently, world silk production dropped from 202,000 tonnes in 2015 to 92,000 in 2020, and estimates of production during 2022 remain below 100,000 tonnes.

• Absorbent Hygiene Products Featuring Advanced Technology Announced:
  pH monitoring pantyliner (Kimberly-Clark), roll dispensing period product (Egal Pad) and novel potty training pad (Sposie Kids)

Three new absorbent disposable hygiene products that provide users with greater protection, convenience and discretion are the finalists for the Hygienix Innovation Award™ that will be selected at Hygienix™, the premier event for absorbent hygiene and personal care markets, Nov. 14-17, at The Roosevelt New Orleans Hotel.

The annual award recognizes and rewards innovation that uses nonwoven material or technology in a way that provides consumer benefit and expands its usage.  
Each of the companies will present their products during the event on Nov. 15 and INDA’s Director of Education & Technical Affairs Matt O’Sickey will announce the winner on Nov. 17, at 11:30 a.m. to conclude Hygienix™.  

Egal Pads: Pads on a Roll™ –A wrapped super-thin absorbent period pad that dispenses like toilet paper in public bathroom stalls, preventing the personal embarrassment of not having a menstrual product when needed. This product promotes period product accessibility and destigmatizes menstrual health. It is targeted to schools and universities and the away-from-home market.

Kimberly-Clark: Kotex® Pantyliner with pH Indicator – The new Kotex Pantyliner with pH indicator, shifts color at the moment it needs to be replaced. This technology works by changing the color from yellow to blue when activated by fluids such as urine, sweat, or others. By indicating the moment to change the product, helps to maintain the intimate area clean, fresh, and consequently healthy.

Sposie Kids: Sposie® Dribbles® Potty Training Pads – An absorbent potty training pad that adheres to boy’s and girl’s underwear to protect against leaks and accidents during the transition from diapers to underwear, while still providing physical cues to the wearer to promote potty training.  The pads absorb over half of an average 2-year-old’s bladder capacity and are 100 percent free from any fragrance, latex, and chlorine.

Hygienix™ Conference Highlights
In addition to the award presentation, the Hygienix™ conference will focus on sustainability with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and the latest market forecasts and insights into consumer buying trends.
Hygienix™ will also offer two specialized workshops, a myriad of business connection opportunities, a welcome reception, first-time attendee mentorship program, and two evenings of tabletop receptions.

The Discover Natural Fibres Initiative DNFI published their statistical World Natural Fibre Update this month. The world production of natural fibres is estimated at 33.7 million tonnes in 2022, a slight increase compared with a preliminary 33.3 million tonnes in 2021 and 31.6 million in 2020.

The DNFI Natural Fibre Composite Price dropped 2% in July 2022 to US 219 cents/kg, compared with US 223 cents the previous month. The DNFI Composite is an average of prices in major markets for cotton, wool, jute, silk, coir fibre, and sisal, converted to US$ per kilogram and weighted by shares of world production.

• The DNFI Composite was pulled downward primarily by a 9% decline in the Eastern Market Indicator of wool prices in Australia, which fell from US$ 10.27 per kilogram in June to US$9.38 in July.
• October cotton ICE futures (the nearby contract) finished July marginally lower, closing at 228 US cents per kilogram, compared with 229 at the end of June.
• Prices of jute fibre in India quoted by the Jute Balers Association (JBA) at the end of July were unchanged from a month earlier, but with depreciation of the Rupee versus the dollar, calculated prices fell from 84 cents to 82 cents per kilogram.
• Prices of silk in China equalled US$29.5 per kilogram in July 2022, coconut coir fibre in India held at US cents 21 per kilogram, and sisal in Brazil finished July at US cents 41 per kilogram.

Cotton prices were the highest in a decade during 2021/22, and world cotton production is estimated by the International Cotton Advisory Committee at 25.8 million tonnes during the 2022/23 season which began August 1, up from 25.4 million in the season just completed. Extreme drought in Texas, the largest producing state in the United States, is limiting the rise in world production that would otherwise be occurring.

World production of jute and allied fibres is estimated unchanged at 3.2 million tonnes in 2022 compared with 2021. High market prices in 2021 motivated farmers to expand planted area in both Bangladesh and India, but dry weather in jute-growing areas during June and July has undermined earlier optimistic hopes for yields. Rainfall was approximately half of normal in the city of Kolkata from early June to mid-July.

Production of coir fibre rose by an average of 18,000 tonnes per year during the past decade, and production was record high at 1.12 million tonnes in 2021. Production is expected to remain high in 2022.

Flax has also been trending upward, rising by an average of 27,000 tonnes per year, and production in 2022 is estimated to remain above one million tonnes.
World wool production is forecast up by 5% in 2022 to 1.09 million tonnes (clean), the highest since 2018. Wetter weather in the Southern Hemisphere, following eight years of drought, is allowing farmers to rebuild herds.

• Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

• Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO₂ equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO₂ emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

The submission was filed by the National Council of Textile Organizations (NCTO) and the Narrow Fabrics Institute (NFI) and Industrial Fabrics Institute (USIFI) – both divisions of the Advanced Textiles Association (ATA).  The associations represent the entirety of the U.S. textile production chain.

“For decades, China’s illegal actions have undermined virtually every domestic manufacturing sector and contributed to the direct loss of millions of U.S. jobs. These devastating state-sponsored practices include intellectual property theft as well as pervasive state-ownership of manufacturing, industrial subsidies, and abhorrent labor and human rights abuses in the Xinjiang region,” they noted. “Cancelling these tariffs would create further unhealthy dependence on Chinese supply chains and embolden future systematic trade abuses as bad actors know that the U.S. will not hold them accountable.”

The tariffs were imposed on China beginning in 2018 in response to China’s continuing IP and related trade violations. China has since failed to comply with an agreement it reached with the United States in 2020.

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

‘Bio-pultrusion’:  
Composites based on natural fibres offer a number of benefits, including low density and high specific strength, vibration damping, and heat insulation. The German Institutes for Textile and Fiber Research Denkendorf (DITF) are developing pultrusion processes using bio-based resins and natural fibres. Projects include the BioMat Pavilion at the University of Stuttgart, a lightweight structure which combines ‘bamboo-like’ natural fibre-based pultruded profiles with a tensile membrane.

Applications for recycled carbon fibre (rCF):
The use of rCF in composite components has the potential to reduce their cost and carbon footprint. However, it is currently used to a limited extent since manufacturers are uncertain about the technical performance of available rCF products, how to process them, and the actual benefits achievable. Fraunhofer IGCV is partnering with the Institute for Textile Technology (ITA) in the MAI ÖkoCaP project to investigate the technical, ecological and economic benefits of using rCF in different industrial applications. The results will be made available in a web-based app.

Circularity and recycling:
The European Composites Industry Association (EuCIA) is drafting a circularity roadmap for the composites industry. It has collaborated with the European Cement Association (CEMBUREAU) on a position paper for the EU Commission’s Joint Research Centre (JRC) which outlines the benefits of co-processing end-of-life composites in cement manufacturing, a recycling solution that is compliant with the EU’s Waste Framework Directive and in commercial operation in Germany. Initial studies have indicated that co-processing with composites has the potential to reduce the global warming impact of cement manufacture by up to 16%. Technologies to allow recovery of fibre and/or resin from composites are in development but a better understanding of the life cycle assessment (LCA) impact of these processes is essential. EuCIA’s ‘circularity waterfall,’ a proposed priority system for composites circularity, highlights the continued need for co-processing.

Sustainability along the value chain:
Sustainability is essential for the long-term viability of businesses. Resin manufacturer AOC’s actions to improve sustainability include programmes to reduce energy, waste and greenhouse gas emissions from operations, the development of ‘greener’ and low VOC emission resins, ensuring compliance with chemicals legislation such as REACH, and involvement in EuCIA’s waste management initiatives. Its sustainable resins portfolio includes styrene-free and low-styrene formulations and products manufactured using bio-based raw materials and recycled PET.

Report Offers INDA Members Key Metrics to Assist in Strategic Planning and Investments

INDA, the Association of the Nonwovens Fabrics Industry, announces publication of the ninth edition of the annual North American Nonwovens Supply Report for its members.

Based on extensive research, producer surveys and interviews with industry leaders, the report provides an overall view of North American supply, including the key metrics of capacity, production and operating rates, in addition to regional trade, through the year 2021. The 75-page report contains 36 figures and 11 tables.

Findings from this year’s Supply Report include:

• North American capacity continues to increase with investments being made across all the processes and for a variety of end-uses. Production output exceeded that of new capacity, resulting in the industry’s nameplate capacity utilization increasing year-over-year, for the fourth consecutive year.
   
• In 2021, capacity of nonwovens in North America reached 5.540 million tonnes, an increase from the previous year of 1.8% (net growth of 98,300 tonnes) and an improvement over the previous year’s pandemic-impacted growth rate of 0.5%.
   
• The industry was able to quickly react to the demand for electrostatically charged fine-fiber meltblown used in the manufacture of respirators and pleated face masks. Twenty-two meltblown lines were added in 2020, resulting in 7.2% year-over-year growth rate for meltblown. In 2021, another 12 lines were added, resulting in 8.5% annual growth over 2020.
   
• North American imports, in tonnage, increased 1.6% in 2021 as exports decreased 6.0%. Imports were led by China accounting for 39% of the imports into North America followed by India (14%) and Germany (9%). Even with the significant shifts in North American trade dynamics, nonwovens tend to stay where they are produced, with the net trade balance (imports less exports, 422,100 tonnes) accounting for less than ten percent of the region’s capacity

The report—and the quarterly INDA Market Pulse and monthly Price Trends Summary—are provided to the nearly 400 INDA member companies and associates as part of their membership. The data gathered for this annual report serves as the foundation for the both the biannual Global Nonwoven Market Report published in September of 2021 and the biannual North American Nonwovens Industry Outlook, which will be updated and published this fall.